Public tenders for transport in Canada

Find all Transport tenders in the world.
Finding business opportunities has never been easier.

Results for transport. Make a new search!
TransportCanada

Handicap Service Transport Vehicle

Correctional Service of Canada | Published April 13, 2017  -  Deadline May 24, 2017
cpvs

Trade Agreement: WTO-AGP/AIT Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Handicap Service Transport  Vehicle  21120-175846/A Paravan, Tony Telephone No. - (873) 469-3319  E-mail: tony.paravan@pwgsc.gc.ca  Items 001 to 010 - Handicap Service Transport Vehicle in accordance with Corectional Services Canada Specifications, Delivery Duty Paid (DDP) various Locations in Canada. Total Quantity 10 (Ten).  Item 011 - Handicap Service Transport Vehicle accordance with Corectional Services Canada Specifications,  FCA Free Carrier, Incoterms 2000 at Contractors Canadian facility or Contractors Canadian distribution point.  Optional Quantity Up to 10 (Ten).  Delivery For items 001 to 010 delivery desirable on or before 21 September 2017.  Debriefings After contract award, bidders may request a debriefing on the results of the bid solicitation.  Bidders should make the request to the Contracting Authority within 15 working days of receipt of notification that their bid was unsuccessful.  The debriefing may be provided in writing, by telephone or in person.       Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

BAG, TRANSPORT, INFLATABLE BOAT

Department of National Defence | Published June 5, 2015  -  Deadline June 23, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Line 1, GSIN: N1940, NSN: 1940219045425, BAG, TRANSPORT, INFLATABLE BOAT, PART: R-F-55010 | NSCM: 38915, Zodiac Hurricane Technologies Inc. PART: VI-9045425 | NSCM: L0874, Venture Industries Quantity: 20, Unit of Issue: Each, Delivery Dates: See Herein, For DND HMC Halifax NS Line 2, GSIN: N1940, NSN: 1940219045425, BAG, TRANSPORT, INFLATABLE BOAT, PART: R-F-55010 | NSCM: 38915, Zodiac Hurricane Technologies Inc. PART: VI-9045425 | NSCM: L0874, Venture Industries Quantity: 20, Unit of Issue: Each, Delivery Dates: See Herein, For DND CFB Esquimalt Victoria BC Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Transport Canada MArine Safety & Security

 | Published September 19, 2014
Winner
The Associates Group of Companies (TAG-HR)
cpvs

Transport Canada requires the services of one (1) Human Resources Consultant, one (1) Change Management Consultant and two (2) Organizational Design and Classification Consultants. This requirement will be from date of award for 24 months, with an irrevocable option for one (1) additional six (6) month period.

P&A - Range Security Transport Vessel

Department of National Defence | Published September 20, 2016  -  Deadline October 20, 2016
cpvs

Trade Agreement: NONE Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   P&A - Range Security Transport Vessel  W8472-175658/A Lamothe, Brenda Telephone No. - (819) 420-2916   Amendment #1 - to correct the closing date at section 8 of the Price and Availability Request.  The closing date has been corrected in section8 of the Price and Availability request to read: Two (2) copies with the information are requested to be submitted to the Contracting Authority on or before October 20th, 2016.    The Department of National Defence (DND) is currently seeking informationand costing for the purchase of two (2) Range Security Transport Vessels (RSTV). The intent of this Price and Availability (P&A) enquiry is to identify the availability and budgetary costs for the provision of two (2) Range Security Transport Vessels(RSTV) within the commercial market.  These vessels will be referred to as the candidate vessels.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Water Transport Training

Royal Canadian Mounted Police | Published November 7, 2017  -  Deadline December 18, 2017
cpvs

Notice of Proposed Procurement

Title: Water Transport Training

Nature of Requirement:

The Royal Canadian Mounted Police has a requirement to provide water transport training to ensure participants receive proper training in marine vessels operation and execution of marine law enforcement duties in accordance with RCMP Course Training Standard (CTS) as well as the competencies required by Transport Canada (TC) for operators of marine vessels. The requirement is for those with previous marine law enforcement experience to provide the training at locations throughout British Columbia. For additional details, please refer to the RFP.

Competitive procurement strategy:

Highest Combined Rating of Technical Merit and Price (70% technical/30% price).

Security:

There is a security requirement, associated with this requirement. For additional information, consult Part 6-Security and Other Requirements, and Part 7-Resulting Contract Clauses.

Trade Agreements:

The requirement is subject to the provisions of the World Trade Organization Agreement on Government Procurement (WTO-AGP), the North American Free Trade Agreement (NAFTA) and the Canadian Free Trade Agreement (CFTA).

Integrity Provisions:

RCMP has adopted the Integrity Regime administered by PSPC. As a result, the integrity provisions are being applied in RCMP contracting activities as outlined in this solicitation.

Enquiries:

Please send all enquiries regarding this bid in writing to the Contracting Officer named below:

Gursharn Dhadwal, Contracting Officer, P) 778-290-2774 gursharn.dhadwal@rcmp-grc.gc.ca

To ensure a response before bid closing date, all enquires must be submitted in writing and received by the Contracting Officer at least fourteen (14) calendar days prior to the bid closing date.

For more information on The RCMP National Procurement Plan for fiscal year 2017-2018 please visit http://www.rcmp-grc.gc.ca/en/rcmp-national-procurement-plan

Documents may be submitted in either official language of Canada.

The Crown retains the right to negotiate with suppliers on any procurement.

RFSA - VARIOUS AIRCRAFT PARTS - TRANSPORT CANADA

Transport Canada | Published March 21, 2016  -  Deadline May 5, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Request For Supply Arrangement (RFSA) VARIOUS AIRCRAFT PARTS - TRANSPORT CANADA  T8493-140035/C  Cormier, Manon Tel:  (819) 956-0512  Further to the consultation conducted with the supplier community in the past four (4) months and based on the positive feedback received on the proposed method of procurement, Public Works and Government Services Canada (PWGSC) is launching the competitive process to establish a Supply Arrangement (SA) to acquire miscellaneous spare parts for all of Transport Canada (TC) aircraft fleets.    The purpose of this Notice of Proposed Procurement (NPP) (T8493-140035/C) is to invite suppliers to submit their applications to be part of the pool of pre-qualified suppliers for this requirement.    This is an opportunity for suppliers who are interested in responding to individual bid solicitations to submit their application to become a pre-qualified supplier. The list of pre-qualified suppliers will be used as a source list for the procurement of miscellaneous aircraft parts for Transport Canada.  Only suppliers who are pre-qualified will be eligible to bid.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Salt & Sand Slide-in Spreader - Transport Canada, Sept-Iles, Quebec, Canada

Transport Canada | Published January 20, 2017  -  Deadline January 3, 2017
cpvs

Salt & Sand Slide-in Spreader - Transport Canada, Sept-Iles, Quebec, Canada

Request for Information - Radioactive Material Transport Risk Assessment

Canadian Nuclear Safety Commission | Published July 14, 2016  -  Deadline October 8, 2016
cpvs

The purpose of this RFI is to obtain information before finalizing the requirements definition and procurement strategy for the subject project which is being carried out by the Canadian Nuclear Safety Commission (CNSC).

The objective of this project is to develop a Transport Risk Assessment (TRA) methodology to complement the review of radioactive material transported in Canada.

A&E - Transport Canada Marshalling Yards

Public Works and Government Services Canada | Published October 27, 2017  -  Deadline November 16, 2017
cpvs

Trade Agreement: CETA / WTO-AGP / NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: Suppliers on permanent list or able to meet qualification requirements Competitive Procurement Strategy: Best Overall  Proposal Comprehensive Land Claim Agreement: No Nature of Requirements:   Transport Canada Marshalling Yards  EB144-181545/A Taylor (PWA), Kathie Telephone No.- (902) 403-4837 Fax No. - (902) 496-5016   This requirement is open only to invited suppliers under the Heavy Civil Engineer Supply Arrangement E0225-141687 who qualified under Highway/Transportation Engineering in the geographic regions of Nova Scotia, New Brunswick and Prince Edward Island.    PWGSC is seeking proposals from Consultants under the Highway/Transportation Engineering Supply Arrangement E0225-141687.  The purpose of this project is to prepare complete tender ready documents for the rehabilitation of five (5) marshalling yards at Transport Canada major ports and one parking area in Atlantic Canada.  Transport Canada has had annual inspection reports prepared to identify areas requiring remediation at its major sites in the Atlantic Region. The purpose of this project is to investigate the conditions identified in the reports and prepare design packages for tender for implementation of construction in 2018. The project includes the marshalling yards at five major ports: Saint John Ferry Terminal, Wood Islands and Souris Ferry Terminals, PEI and Digby and Caribou Ferry Terminal in NS and one parking area at Cape Jourimain at Confederation Bridge.     Note:  The Heavy Civil Engineering Supply Arrangement is subject to an annual refresh.  If you wish to become a Qualified SA Holder, please contact Kathie Taylor at kathie.taylor@pwgsc.gc.ca.     Delivery Date: 25/10/2017  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Transport Canada Hanger De-Construction, Edmonton , Alberta

Public Works & Government Services Canada | Published September 23, 2014
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Attachment: YES (MERX) Electronic Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Transport Canada Hanger De-Construction, Edmonton, Alberta EW038-151005/A On behalf of Transport Canada, Public Works and Government Services Canada (PWGSC) is seeking tenders for the provision of all materias, equipment, labour and supervision for the de-construction of the existing Transport Canada Hanger located at the Edmonton City Centre Airport. The project consists of the de-construstruction of the existing Transport Canada Hangar in a manner where it can be packaged and moved to its new location at the Villeneuve Airport where it will be turned over to the New Owner. as detailed in the specifications, drawings and Invitation to Tender documents. The Contractor shall be responsible for all aspects of the de-construction and shall be required to carefully document all stages and label all pieces of the building. This documentation is required to be clear and detailed so the New Owner can re-construct the building with minimal difficulty when the time comes. The Contractor shall then be required to turn this documentation over to the New Owner as a resonctruction manual. The Contractor shall provide all shipping/storage containers for the items to be stored until the building will be re-constructed. Because there is no timeframe as to when the building will be re-constructed the shipping.storage containers will not be returned. The Contractor shall leave the site as Rough Grading with positive drainage Drawings and Specifications are now available for viewing and downloading in a Portable Document Format (PDF) . Tenderers should note that Attachment 1 (ATT 1) contains the Drawings and Specifications Package (DSP) which consist of PDF files organized in an industry recognized directory structure. NOTICE - OPTIONAL SITE VISIT There will be a site visit September 30, 2014 at 9:00 AM. Interested bidders are to meet at Hangar Building #5, 11936-109 St, Edmonton, Alberta. The representative of the bidder will be required to sign the Site Visit Attendance Sheet at the site visit. This PWGSC Office provides procurement services to the public in English. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Medical Advisors to Civil Aviation at Transport Canada

Transport Canada | Published March 3, 2015  -  Deadline March 17, 2015
cpvs

Transport Canada wishes to award a general contract for Medical Advisors to Civil Aviation. The attached lists of medical doctors will be required in the Prairie & Northern, Pacific, Quebec, Ontario and National Capital Regions. If necessary, they will also be required to travel overseas as representatives of Transport Canada, Civil Aviation. Requirement This document is a call for medical advisors in various specialty fields of medicine related to the aeromedical certification of pilots and air traffic controllers. Scope of Work The scope of this contract will be confined to tasks listed below. Travel expenses to be paid as deemed necessary on a case-to-case basis. Background Information - Civil Aviation Medicine The Civil Aviation Medicine Branch (CAM) of Transport Canada is responsible for all aspects of aviation health and advises on many issues in aviation safety. This includes the assessment of health hazards and medical fitness of civilian aircrew, development of medical standards, education and training for aircrew and Civil Aviation Medical Examiners (CAMEs). In addition CAM is working with the RCAF on the development of postgraduate training and certification of aerospace medicine specialists in Canada. From time to time, we may be called upon by other Branches to review their medical procedures, and also to advise and recommend on other issues related to a medical certification program similar to CAM’s. The doctors requested to provide this work would be contracted from the ACAN list. In addition, CAM is involved in national and international aero-medical research. To ensure that CAM meets its mandate, it is required to contract with various medical specialists.

Transport Canada - Six Wheel Grader

Transport Canada | Published September 23, 2015
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Transport Canada - Six Wheel Grader T2012-150010/B Connolly, Carolyn Telephone No. - (709) 772-5396 Fax No. - (709) 772-4603 This bid solicitation cancels and supersedes previous bid solicitation number T2012-150010/A dated 26 May 2015 with a closing of 16 July 2015 at 2:00 p.m. NL time. A debriefing or feedback session will be provided upon request to bidders/offerors/suppliers who bid on the previous solicitation. Transport Canada has a requirement for the supply and delivery of a six-wheel grader that will be used in an airport setting (St. Anthony Airport). A detailed specification is attached. Offerors must complete the chart of mandatory criteria in the attached specification package. Grader is to be delivered FOB Destination to: St. Anthony Airport. 1 Airport Road St. Anthony, NL A0K 4C0 Canada This procurement is subject to the provisions of the Agreement on Internal Trade (AIT), the North American Free Trade Agreement (NAFTA), and the World Trade Organization Agreement on Government Procurement (WTO-AGP). IMPORTANT NOTE TO BIDDERS: It is the responsibility of the Bidder to ensure that all addenda issued prior to tender closing have been obtained and addressed in the submitted tender. Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the tender and contract documents. The standard Public Works and Government Services Canada documents may be viewed at https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisiti on-clauses-and-conditions-manual/all. Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS) at https://buyandsell.gc.ca/procurement-data/tenders. Addenda, when issued, will be available on GETS. Firms that elect to base their bids on tender documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender authority of their intention to bid. Bids will be received in English or French at: Public Works and Government Services Canada, Bid Receiving Unit, 10 Barter's Hill, P.O. Box 4600, St. John's, Newfoundland and Labrador A1C 5T2. Delivery Date Required: Delivery of goods required on or before 120 calendar days post Contract award. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Heavy Lift Transport of Two Mid-Shore Patron Vessels to the Pacific Coast

Fisheries & Oceans Canada | Published July 24, 2014
cpvs

Solicitation #: FP802-140006 Closing Date: September 3rd, 2014 Time: 11:00am This requirement is for the department of Fisheries and Oceans Canada. Title: Heavy Lift Transport of Two Mid-Shore Patron Vessels to the Pacific Coast Introduction: Canada requires the transport of two Mid-Shore Patrol Vessels (MSPVs), each being 42.8 metres long by 7 metres wide and each of 265.8 tonnes operating displacement, aboard a larger vessel with heavy-lift capability. This one-way transport voyage, carrying two Canadian Coast Guard vessels is expected to commence in late fall 2014 from Halifax, Nova Scotia, on the Atlantic coast of Canada, arriving at the destination port, Victoria, British Columbia, on the Pacific coast of Canada. This winning bidder will be responsible for the arranging and payment of insurance for the new CCG vessels throughout the voyage, paying for any licences required and paying any tariffs which might be incurred in making this voyage between oceans. Title to the vessels to be transported in this Contract shall vest in Canada upon payment of invoiced amounts and shall remain so vested at all times. Purpose: Canada requires a one-time, one-way transport service, to move two small ships from the East Coast to the West Coast of Canada. This transport service is required because both vessels are being built in Halifax, Nova Scotia and after their Acceptance by CCG, the vessels’ home-ports will become Victoria, British Columbia and they will be working along the Canadian section of the Pacific coast. A) The winning Contractor shall arrange to meet the CCG at Halifax, Nova Scotia and take over temporary care and custody of two Mid-Shore Patrol Vessels (MSPVs) from the CCG at Bedford Institute of Oceanography docks, Dartmouth, Nova Scotia, for the purpose of transport to the Pacific coast of Canada. Video will be taken to validate the condition of the two MSPVs, before turning over custody of the vessels to the winning Contractor. B) The winning Contractor will safely load the two MSPVs onto their heavy-lift vessel in the harbour at Halifax, so that the MSPVs are clear of the water, and so that the MSPVs are fully supported and safely stowed for any weather and sea conditions likely to be encountered on the ocean voyage between Halifax and the Pacific coast. Towing or sailing of the two MSPVs at any point during the Contracted delivery voyage is not permitted. Satisfactory loading can be recognized with a first payment (milestone). C) Crew-members of the winning Contractor will navigate their heavy-lift vessel, carrying the two MSPVs owned by CCG, from Halifax, Nova Scotia, on Canada’s East coast to the local area of Victoria, British Columbia, on Canada’s West coast, complying with all applicable regional and international regulations, rules and guidelines. D) The winning Contractor will unload both MSPVs at a port agreed upon by both parties to the Contract, while fulfilling all obligations and requirements relevant to heavy-lift unloading in that country. The destination port is Victoria, B.C., but depending on the type of heavy-lift vessel used as a carrier, CCG realizes that unloading of the MSPVs might not be possible at that port. E) Canada requires an update message on the progress of the heavy-lift voyages every two days; this may be in the form of an e-mail sent through satellite communications by the Contractor’s crew. F) The Contractor will contact Canada at the time of unloading to advise that a CCG crew is needed for both vessels. Canada will consider the Contract to be successfully complete when both MSPVs have been delivered to CCG in the same condition as they were accepted by the Contractor, when loaded at Halifax. The condition of the unloaded vessels will be compared to video which was taken before loading and the value of any damage to either vessel sustained during transport will be considered against the award of the delivery (milestone) payment. Ownership of Intellectual Property: There is no intellectual property associated with the contract. Security Requirement: There is no security requirements associated with this contract. Mandatory Requirements: No. Mandatory Criteria Meets Criteria () Proposal Page No. M1 Experience The proposed bidder must demonstrate completed heavy-lift transport projects or project-cargo moves in the previous four (4) years, including at least one sea-voyage transport Bidders must demonstrate they have successfully provided services similar to those identified in the statement of work (SOW) at Annex A. To • the name of the client; • the period during which the service was provided; • a detailed outline of the services provided; and • contact names, positions/titles and contact information (telephone numbers, email addresses, etc.) for verification purposes. M2 Reliability a)The proposed bidder must show documentation indicating that their heavy-lift operation is currently and completely covered by the appropriate level of Marine insurance for the year 2014. b) The bidder must show that their vessel complies with all of the rules of one of the major Classification Societies recognized by Transport Canada; Nippon Kaiji Kyokai, The American Bureau of Shipping, Lloyd’s Register, Germanischer Lloyd or Det Norske Veritas A copy of the insurance certificates, permits, certifications and licenses is to be included in the bidders’ proposal at time of bid closing. M3 License Agreements The proposed bidder must show a heavy transport plan, by documentation or by video presentation, detailing how the bidder proposes to transport the two (2) CCG vessels. The CCG requires that the two (2) CCG vessels shall be transported clear of all water as detailed in SOW Enquiries regarding this RFP requirement are to be submitted in writing to the following: Natasha Blackstein Contracting Officer, Department of Fisheries and Oceans Station 9W067, 200 Kent Street Ottawa, Ontario, K1A 0E6 Tel: (613) 993-5741 Fax: (613) 991-1297 Email: Natasha.blackstein@dfo-mpo.gc.ca

2000-Gallon Single Compartment Fish Transport Tank

Fisheries and Oceans Canada | Published October 30, 2017
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   F5220-173024/A Lomax (STJ), Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376  2000-Gallon Single Compartment Fish Transport Tank  Public Service and Procurement Canada has a requirement to procure a 2000 gallon single compartment fish transport tank for the Department of Fisheries and Oceans. Full details of the requirement are outlined in the solicitation document  All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Sandra Lomax, telephone - (506) 636-4362, facsimile - (506) 636-4376, email - sandra.lomax@pwgsc.gc.ca.  Inquiries are to be made in writing and should be  received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.     Firm intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS).  Addenda, when issued, will be available on GETS. Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents are issued by Public Works and Government Services and may be viewed at buyandsell.gc.ca.  This PWGSC office provided procurement services to the public in both official languages  Documents may be submitted in either official language of Canada  Delivery Date: March 31, 2018    The Crown retains the right to negotiate with suppliers on any procurement. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Corporate Records and Mail Management Services Division Transport Canada - National Capital Region

Transport Canada | Published October 14, 2015
Winner
Commissionaires of Ottawa
cpvs

The nature of messenger services within Transport Canada consists of the careful and confidential handling, sorting and delivering of the royal mail and other bulk correspondence. Bulk deliveries are made to other government and non-government buildings within the National Capital Region while non-bulk deliveries are made to the various floors and sites within core Transport Canada buildings located within the NCR. The scope of services presently covers about 32 different organizations, located in approximately 27 different buildings in the National Capital Region. These services take place on both a scheduled and unscheduled basis. Variations in the number of organizations serviced may increase or decrease while this contract is in effect.

Corporate Records and Mail Management Services Division Transport Canada - National Capital Region

Transport Canada | Published December 23, 2014  -  Deadline February 2, 2015
cpvs

The nature of messenger services within Transport Canada consists of the careful and confidential handling, sorting and delivering of the royal mail and other bulk correspondence. Bulk deliveries are made to other government and non-government buildings within the National Capital Region while non-bulk deliveries are made to the various floors and sites within core Transport Canada buildings located within the NCR. The scope of services presently covers about 32 different organizations, located in approximately 27 different buildings in the National Capital Region. These services take place on both a scheduled and unscheduled basis. Variations in the number of organizations serviced may increase or decrease while this contract is in effect.

North Apron Land Treatment Transport Canada

Public Works and Government Services Canada | Published September 15, 2016  -  Deadline April 10, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   EZ897-171443/A Siopongco, Philip (PWY) Telephone No. - (604) 351-6139   Title:   North Apron Land Treatment  Transport Canada  Location:  Erik Nielsen Whitehorse International Airport, Whitehorse, Yukon Y1A 6E6  Note to Tenderers: Drawings and Specifications are now available for viewing and downloading in a Portable Document Format (PDF) or in a standard paper version. Tenderers should note that Attachment File(s) contain the Drawings and Specifications Package (DSP) which consists of PDFfiles organized in an industry recognized directory structure.  Work Description:   PWGSC, on behalf of Transport Canada, requires approximately 3,000 cubic meters of soil already in a Soil Treatment Facility (STF) to be bio-remediated.  The site islocated within the boundaries of the Whitehorse Airport, Whitehorse, Yukon.  The Contractor will be responsible for preparing the existing STF, operating the tractor and excavator, applying fertilizer and water, assisting with sampling, and preparing the site for closure.  Specific Work to be performed includes: 1. Pre-mobilization Submittals. 2. Mobilization. 3. Site preparation. 4. Site facilities provision. 5. Site facilities operation. 6. Standby Time. 7. Non-contaminated material and waste transport. 8. Non-contaminated material and waste disposal. 9. Land facility preparation. 10. Fertilizer supply and application. 11. Water application. 12. Tractor operation. 13. Soil flipping using excavator. 14. Soil sampling with backhoe/excavator. 15. Bioremediated soil relocation. 16. Soil relocation from cell to cell. 17. Demobilization. 18. Closeout Submittals.  The Contractor must be experienced in handling contaminated material, and have all appropriate health and safety and environmental protection procedures in place.    Work will be performed in accordance with the contract schedules within the scope of work.  Site Visit:  While there are no scheduled site visits, contractors are recommended to visit the site prior to submitting a tender for this work and to make inquiries or investigations necessary to become thoroughly acquainted with the site as well as the nature and extent of the work.    Delivery Date:  The work shall commence immediately upon official notification of acceptance of the tender by the Contracting Authority and is to be completed by December 31, 2016.  Enquiries:   Philip Siopongco, A/Supply Specialist  Tel: (604) 351-6139 Fax: (604) 775-6633 Email: Philip.Siopongco@pwgsc.gc.ca  Value of Project:  To assist with bonding and insurance requirements, this project is estimated to cost between $160,000.00 to $200,000.00  Firms intending to submit tenders on this project should obtain tender (solicitation) documents through Buyandsell.gc.ca/tenders.  Addenda, when issued will be available from Buyandsell.gc.ca/tenders.  Firms that elect to base their bids on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tendercalling authority of their intention to bid.  In all cases, bidders must indicate (when requested) in the space provided on the tender form the identification number(s)of the addenda, if any, that they have taken into consideration for their bid.  This procurement office provides procurement services to the public in English.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Niagara Region, ON - Surveying Transport Canada Lands

Public Works & Government Services Canada | Published May 15, 2015  -  Deadline April 6, 2015
cpvs

Trade Agreement: NONE Tendering Procedures: All interested suppliers may submit a bid Attachment: YES (MERX) Electronic, Diskette Competitive Procurement Strategy: Best Overall Proposal Comprehensive Land Claim Agreement: No Nature of Requirements: EQ754-152162/A Somaratna, Chinthaka Telephone No. - (416) 512-5268 Fax No. - (416) 512-5862 E-mail: chinthaka.somaratna@pwgsc-tpsgc.gc.ca. Solicitation No. EQ754-152162/A, Project No. R067842.004, Surveying Transport Canada Lands North of Queen Elizabeth Way, Niagara Region, ON. SCOPE OF WORK: Public Works and Government Services Canada (PWGSC) intends to retain a firm of Surveyors to survey Transport Canada (TC) lands north of Queen Elizabeth Way in Niagara Region, Ontario. The required work involves obtaining a series of boundary surveys for parcels that are under the custodianship of TC in the Niagara area. The Department of Transport Canada owns lands which are managed by the St. Lawrence Seaway Management Corporation (SLSMC). This project includes cadastral surveying work required in order to establish the limits of certain TC lands in the Niagara area. These lands include approximately 730 hectares of land area and 541 hectares of water lot. The lands and water lot are located immediately east of the working Welland Canal running from Lake Ontario to the Queen Elizabeth Way. This project requires professional surveying services to provide TC with an up-to-date report on extent and quality of ownership of certain St. Lawrence Seaway lands located in the City of St. Catharines and the Town of Niagara-on-the-Lake. The report is to include the results of a search of the local Registry Office records, field surveys and the preparation of Reference Plans of Survey. ESTIMATED CONTRACT VALUE The estimated value of this opportunity is within the following range: $100,000.00 to $400,000.00. RFP DETAILS: Bidder(s) are requested to submit their proposal identifying how they will meet Mandatory and Point Rated technical evaluation criteria. Bidder(s) must be in compliance with all Mandatory evaluation criteria listed in the Request for Proposal (RFP). Responsive bidders will then be evaluated for the Point Rated technical criteria which will cover the bidder's: understanding of the project; scope of services; management of services; and firms skills/experience. The PWGSC Evaluation Board will evaluate and rate each submission according to the evaluation criteria, components and weight factors set out in the RFP. The responsive Bidder with the lowest evaluated price will be recommended for Contract award. Surveying firms interested in providing these services may order the Request for Proposal documents which are distributed through the Government Electronic Tendering Service (GETS). Standard Terms and Conditions for this procurement are incorporated by reference into, and form part of the Tender and Contract Documents. The Standard documents are issued by Public Works and Government Services Canada and may be viewed on buyandsell.gc.ca. Tender documents can be obtained from GETS by visiting their web site at http://buyandsell.gc.ca/tenders. Amendments, when issued, will be available from GETS. In all cases bidders must indicate in the space provided on the Proposal Form the identification number(s) of the amendment(s), if any, that they have taken into consideration for their bid. RFP SUBMISSION: Bidders must submit their completed RFP submission to the address indicated in the front page of the solicitation document under the heading "RETURN BIDS TO". Failure to do so will result in your submission being deemed non-complaint. ENQUIRIES: All enquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Chinthaka Somaratna Telephone No.:416-512-5268 Fax No.: 416-512-5862 E-mail: chinthaka.somaratna@pwgsc-tpsgc.gc.ca. This PWGSC office provides procurement services to the public in both official languages. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Transport Canada Requires six (6) Senior Business Systems Analyst to support developing and maintaining IT solutions for the Department.

Transport Canada | Published December 2, 2015  -  Deadline December 22, 2015
cpvs

Transport Canada requires the services of six (6) Senior Business Systems Analyst to support the Application Management Services (AMS) Branch of the Technology and Information Management Services Directorate in developing and maintaining IT solutions for the Department.

Solution-Based Informatics Professional Services (SBIPS) Requirement Transport Canada

Transport Canada | Published January 22, 2016  -  Deadline May 2, 2016
cpvs

Solution-Based Informatics Professional Services (SBIPS) Requirement

This requirement is for: Transport Canada

This requirement is open only to those Supply Arrangement Holders who qualified under Tier “ 1 ” stream 7: Legacy Support and Transition

This requirement is open only to those invited SBIPS Supply Arrangement Holders who qualified under the categories for: Legacy Support and Transition

The following SA Holders have been invited to submit a proposal.

Accenture Inc.

Aerotek ULC

CM Inc.

Compusult Limited

DONNA CONNA INC., IBM CANADA LIMITED IN JOINT VENTURE

Fujitsu Consulting (CANADA) Inc./Fujitsu Conseil (Canada) Inc.

Hewlett-Packard (Canada) Co. Hewlett-Packard (Canada) Cie

IBM Canada Ltd.

iFathom Corporation

Lockheed Martin Canada Inc.

Modis Canada Inc

Systemscope Inc., LNW Consulting Inc., Perfortics Consulting Inc., VK Computer Systems Inc., Lansdowne Technology Services Inc., IN JOINT VENTURE

TeraMach Technologies Inc.

The Bell Telephone Company of Canada or Bell Canada/La Compagnie de Téléphone Bell du Canada ou Bell Canada

Unisys Canada Inc.

Description of the requirement:

Transport Canada (TC) will use Solutions-Based Informatics Professional Services (SBIPS) to establish a contract to support them to complete a legacy Business Rules Recovery and maintenance resulting in a Strategy and Roadmap which will take maximum advantage of existing and evolving technologies, resources, and skills to deliver the high quality cost effective approach to extracting and documenting the business rules embedded in several of its legacy applications that are candidates for transformation by Transport Canada for the years to come.

Proposed period of contract:
The proposed period of contract shall be from contract award for 12 month withtwo 12 month options.

File Number: T8080-150260

Contracting Authority: Yevgeniy Kozlov

Phone Number: 613-990-3356

E-Mail: yevgeniy.kozlov@tc.gc.ca

NOTE: Solution-Based Informatics Professional Services (SBIPS) Method of Supply is refreshed on an annual basis. If you wish to find out how you can be a “Qualified SA Holder”, please contact RCNMDAI.-NCRIMOS@pwgsc.gc.ca