Public tenders for printing in Seattle United States

Find all Printing tenders in the world.
Finding business opportunities has never been easier.

Results for printing. Make a new search!

Printing 91, 527 of 12 month + cover page desktop planner

Government Printing Office, Customer Services Department | Published May 14, 2015  -  Deadline May 20, 2015
cpvs

Print via offset printing 91,527 copies of a 13 leaf desktop planner. Printing in 4-color process. 22 X 17" trim size.with bleeds. Padded with 5opt. chipboard. Shrink wrapped in 25's with a 3.5 x 5.5" card printed face only in blank ink. For complete specifications go to http://contractorconnect.gpo.gov/, click on "bid opportunities", then click on Regional and satellite "GPO Soliications Online" then click on "Chicago" and look under one-time bids for JAcket 535-468. All bids must be from a registered GPO contractor. To register go to http://contractorconnect.gpo.gov/, and click on "Register"at the bottom center.

36--SUPPLY - 663 - 3D PRINTER - R&D

Department of Veterans Affairs, VA Northwest Health Network | Published June 29, 2016  -  Deadline July 6, 2016
cpvs

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, quotes are being requested, and a written solicitation will not be issued. 2. The solicitation number is: VA260-16-Q-0564, this solicitation is issued as a Request for Quote (RFQ) for the Seattle VAMC Research and Development Department. The requirement is for a commercial grade 3D printer with accessories to include installation and training. 3. Solicitation documentation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-87. 4. This solicitation is issued for full and open competition. The North American Industry Classification Code (NAICS) is 334118 - Printers, Computers, Manufacturing and the business size standard is 1000 employees. Any small businesses submitting quotes must either be the manufacturer or an authorized reseller or distributer to ensure no "grey market" items are procured. 5. The Federal Government intends to award a firm-fixed price contract for supplies and/or services. This is a BRAND NAME or EQUAL requirement. The brand manufacturer is Stratasys. Contractor must be able to provide all of the listed items or equal. The quoted items shall meet or exceed the requirements of the items listed below. If an equal item product is quoted, the vendor shall submit documentation stating why/how their product meets or exceeds each brand name item. Specific Contract Line Items (CLIN) are listed below: CLIN - P/N - DESCRIPTION - QTY 0001 - OBJ-17000 - Objet 350 Connex 3, 3D Printer (See characteristics below) - Qty 1. 0002 - OBJ-03006 - Water Jet; Large Format (See characteristics below) - Qty 1. 0003 - OBJ -017013 - Installation and Training (See characteristics below) - Qty 1. 0004 - PW9130L2000T-XL - UPS Power Backup (See characteristics below) - Qty 1. 0005 - Minimum 12 month warranty/maintenance support (See characteristics below) - Qty 1. 0006 - Include all equipment manuals and guides - Qty 1 set. Specific CLIN characteristics: CLIN 0001: Printer - Able to print a range of rigid and flexible full color (full red green blue spectrum) photopolymer materials by depositing three different base resins in specific formulations in an automated fashion to create 1000 or more composite materials with specific, predictable properties. - Able to create 1000 or more composite materials with specific, published material and mechanical properties - Able to blend 3 or more base materials simultaneously to create new digital materials. - Have 8 or more print heads that are used simultaneously to deposit materials during the building process. - Must use 8 piezoelectric printing heads to jet material onto a build tray and cure the material with 2 UV lights onboard the machine. - Printing heads must be able to accommodate unique base solutions such that multiple materials can be printed simultaneously in the same model or mixed in an infinite variety to produce flexible, compressible, rubber-like materials that can seamlessly blend from hard to flexible as desired. - Able to print in the following elastomers simultaneously - Shore A 27, 40, 50, 60, 70 85, 95 to simulate different soft tissue-like materials in the same print job. - Able to print very hard materials with a Shore D hardness greater than 80 - Printer must be able to create devices with a mix of both rigid and compliant components. - Printer must use a poly-jet additive manufacturing technology with the capability of producing high-fidelity parts with stiffness and compliance profiles that range from very soft (Shore A < 27, e.g bike gel seat) to very hard (Shore D > 80, e.g. hard hat). - It must be capable of supporting a range of materials with a wide array of properties from rubber to rigid and transparent to opaque. - Able to produce hard materials which can be fabricated alongside and intertwined with flexible materials, in response to computerized design input. This capability is critical for development of difficult-to-fabricate equipment, instruments, and tools. For example, a biomechanically-accurate robotic model can be built with ligaments built into the bones, exactly as found in nature. - Able to incorporate up to 82 material properties in a single build. - Able to print a tray of mixed parts: eliminate the need for assembly when building 82 distinct material properties into a single part in one automated job. - Able to print with transparent, flexible and bio-compatible materials in the same machine. - Have a minimum print volume of 340 × 340 × 200 mm (13.4 × 13.4 × 7.9 in.) and print parts up to this size in all printing modes - especially the highest quality mode. - Able to print plastic layers down to 16 microns thick. - Able to print at a minimum speed of 12 mm per hour/strip in 16-micron (0.0006 in.). - Minimum acceptable build resolution of 600 dpi (X and Y axis) and 1600 dpi (Z axis). - Minimum acceptable accuracy is 20-85 micron for features below 50 mm; 200 micron or less for full model size" - Printer must be able to print with a support material that can be removed with waterjet. - Printer must be able to print with a support material that is soluble for automated post-processing and increased geometric freedom to print complex and delicate features and small cavities - Support material removal cannot involve wax or heat which could warp parts that have delicate features or cause parts to sweat wax which would negatively impact post processing and part painting. - Able to fabricate parts that include many distinct materials simultaneously. - Capable of producing irregularly-shaped objects, such as customized user-specific residual limb linings for prosthetic applications, orthotic devices with dynamic stiffness, etc. - Printer must not produce an end product through the process of extruding melted plastic to build up objects layer-by-layer. This is the method of 1st generation 3D printing technology and does not have sufficient resolution or flexibility. - Printer must be capable of generating objects using layers of curable liquid photopolymer onto a build tray, in contrast to the older method of melted polymer deposition. - Printer must have the ability to print in elastomer to produce flexible, compliant structures that are intimately connected to stiffer rigid components. CLIN 0002: Water Jet or similar method/equipment a. Used to clean printed parts of debris and waste b. Removal process cannot heat which could potentially warp parts CLIN 0003: Installation and Training a. Provide on-site installation of printer and associated equipment b. Provide on-site training upon the completion of installation CLIN 0004: UPS Powerbackup a. Input Voltage: 90-140 VAC, 120 VAC nominal - 50/60HZ - Connection: NEMA 5-20P b. Output: 2000VA @ 1800 W, 120VAC - Connection: Min (4) NEMA 5-20R and (1) NEMA L5-20R. c. Interface: RS-232 USB Port d. Include all software, cables and manuals required for installation e. Minimum of one year warranty CLIN 0005: 12 Month Warranty and Maintenance Support a. Minimum 12 month parts and labor warranty on all equipment (excluding UPS). b. Minimum 12 month maintenance support CLIN 0006: Manuals/Guide a. Include one set of manuals/user guides 6. Delivery (FOB Destination is preferred): Seattle VAMC, VA Puget Sound Health Care System, Warehouse 90D, 1660 S. Columbian Way, Seattle, WA 98108. Shipping (estimated) will be identified and rounded into unit price. Final shipping information will be included in the issued delivery order. All supplies must be delivered within 30-45 days after receipt of order. All prices and quotes shall be submitted in US Dollars to be considered. 7. Vendors should thoroughly review and be familiar with the requirements of the solicitation prior to submitting quotes in order to be fully aware of the scope of supplies and services required. Failure to do so will not relieve the successful offeror from performing in accordance with the strict intent and meaning of the specifications without additional cost to the Government. The Government shall not reimburse any cost not incorporated into the vendor's price. 8. To respond to this solicitation, quotes shall be emailed to robert.hamilton8@va.gov. Please include "VA260-16-Q-0564 3D Printer" in the subject line of all quotes. All quotations from responsible sources will be fully considered. 9. Quotes are due by 3 P.M. Eastern Standard Time (EST) on July 6, 2016. 10. Procurement of these commercial supplies and/or services is being conducted according to FAR part 12 Commercial Items, FAR part 13 Simplified Acquisition Procedures (SAP), and the VAAR, as supplemented with additional information in this notice. 11. Prior to submitting a bid, Offeror(s) shall be actively registered in the System for Award Management (SAM) per FAR 52.204-7 System for Award Management. Registration instructions may be obtained and online registration may be accomplished at www.sam.gov. By submitting a bid, the Offeror acknowledges the requirement to be registered in the SAM prior to award, during performance, and through final payment of any contract or purchase order resulting from the solicitation. To be eligible for award, Offeror(s) must be registered in SAM under the appropriate business category and NAICS code. In addition, unless available via SAM (i.e. www.sam.gov) Offeror(s) shall include a completed copy of their Representations and Certifications as per the provision 52.212-3, Offeror Representations and Certifications-Commercial Items, with their bid. CLAUSES, PROVISIONS, AND ADDITIONAL INSTRUCTIONS The provision at FAR part 52.211-6, Brand Name or Equal, applies to this acquisition. The provision at FAR part 52.212-1, Instructions to Offerors-Commercial, applies to this acquisition. The provision at FAR part 52.212-2, Evaluation - Commercial Items, does apply to this acquisition. The provision at FAR Part 52.212-3, Offeror Representations and Certifications - Commercial Items, applies to this acquisition. The provision at FAR Part 52.214-21, Descriptive Literature, applies to this acquisition. The clause at FAR part 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The clause at FAR part 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items, applies to this acquisition. Additional clauses applicable to this procurement are attached on RFQ: VA260-16-Q-0564

Refuse Collection and Disposal Services - USCG Seattle

Department of Homeland Security, United States Coast Guard (USCG) | Published May 5, 2016  -  Deadline July 11, 2016
cpvs

This is a Synopsis/Pre-Solicitation Announcement. The U.S. Coast Guard (USCG) Shore Infrastructure Logistics Center (SILC), Alameda, CA has a requirement for REFUSE COLLECTION AND DISPOSAL SERVICES for the USCG Base Seattle located in Seattle, Washington. The procurement will be solicited using unrestricted/full and open competition procedures. A firm-fixed price type contract will be awarded for a Base Period starting 1 OCTOBER 2016 through 30 SEPTEMBER 2017 plus FOUR one-year option periods for total contract duration not to exceed 60 months. If all options are exercised by the Government the contract term will end 30 SEPTEMBER 2021. The Contractor shall furnish all labor, material, equipment, supplies, transportation, supervision and management necessary to perform all REFUSE COLLECTION AND DISPOSAL SERVICES for the aforementioned USCG location(s). All services shall be in strict adherence to the Performance Work Statement (PWS), as well as applicable local, state and federal regulations and/or Coast Guard station/location instructions, and shall be consistent with current industry practices in order to maintain a safe, clean and healthy environment for all the residents, military/civilian personnel, tenant commands and visiting members of the public. All required licenses and/or certifications required for the State of Washington must be identified and submitted with response to the solicitation. The North American Industry Classification System (NAICS) code is 562111 - Solid Waste Collection with a small business annual revenue size standard of $38.5M. See SBA's Small Business Size Regulations at https://www.sba.gov/content/part-121-small-business-size-regulations-1 Current contract information:Waste Management of Washington, Inc.7201 W. Marginal Way SW, Seattle, WA 98108Awarded in the amount of $671,502.36 for the Base Year Period and FOUR (4) Option Years (10/01/2011- 09/30/2016).Interested parties should register in the System for Award Management (SAM). Information on SAM registration can be obtained at www.sam.gov. Contractors MUST be registered in the System for Award Management (SAM) in order to receive a contract award from any USCG activity. Ensure DUNS and CAGE Code numbers are provided with the proposal. DUNS number can be obtained via www.dnb.com or 1-800-333-0505. FAR 52.212-1 Instructions to Offerors - Commercial Items applies to this solicitation. The solicitation will utilize procedures and incorporate provisions and clauses in accordance with FAR Part 12 Acquisition of Commercial Items and FAR Part 15 Contracting by Negotiations. The solicitation Request for Proposal (RFP) will be available on or about 6 June 2016 and is anticipated to close 11 July 2016. Interested parties are hereby notified that the solicitation will be available exclusively on the Federal Business Opportunities (FedBizOpps, FBO) website, www.fbo.gov. The solicitation, attachments, and amendments will be published for viewing, printing, and downloading from the FBO website only. It is the potential offeror's responsibility to monitor FBO for the release of the solicitation and any subsequent amendments. No hardcopy/paper versions of the solicitation or amendments will be distributed. Prospective bidders shall locate the solicitation no. HSCG84-16-R-A13390 and follow the instructions. All prospective bidders are responsible for visiting Federal Business Opportunities frequently and obtaining any amendments or other information pertaining to the solicitation. PLEASE READ THE ENTIRE SOLICITATION AND COMPLETE ALL REQUIRED DOCUMENTATION WHEN SUBMITTING YOUR PROPOSAL. The proposal must be submitted via regular and/or priority mail. No electronic copies of the proposal will be accepted. There will be a time period specified in the solicitation for the receipt of questions. Solicitation number is HSCG84-16-R-A13390.
  • 1