Public tenders for printing in Cleveland-oh United States

Find all Printing tenders in the world.
Finding business opportunities has never been easier.

Results for printing. Make a new search!

Binder Jet Printer for Advanced Additive Manufacturing

National Aeronautics and Space Administration, Glenn Research Center | Published August 23, 2016  -  Deadline August 31, 2016
cpvs

NASA/GRC has a requirement for a Binder Jetting Machine with associated equipment and software, Quantity (1) one.NASA/GRC intends to purchase the items from The ExOne Company, North Huntingdon, PA. NASA GRC has initiated a new research area on additive manufacturing of ceramic matrix composites in support of our mission focus on high temperature materials for aircraft engines. As part of this focus, we recently completed a year-long development program with a contractor in which we adapted the binder jet process to optimize it for the fabrication of ceramic matrix composite (CMC) materials. The binder jet process was chosen because it is considered by the technical experts in the field (both in industry & NASA GRC) to be the most suitable for fabricating CMC's. The powder bed processing approach allows for the optimization and integration of the matrix and the reinforcing fiber materials. Also, the binder jetting process, allows for opportunities for improving the matrix compositions and properties as well as the density. In the recently ended effort, we had used the contractor's ExOne binder jet machine for the development of CMCs. NASA GRC does not currently have the capability to do the binder jet processing in-house because we do not have the necessary machine. This procurement will provide that capability. This purchase will allow for direct control of the additive manufacturing approach so that all steps in the process can be optimized. The ExOne binder jet system is currently the only one which allows for the development and manufacturing of tailored powders, fiber reinforcement, and jetting material for making silicon carbide (SiC)-based CMCs. The CMC materials that we use for this work are developmental and are adjusted/modified as needed to optimize the quality and mechanical properties of the composites that are produced. NASA GRC has very stringent material requirements that we must meet (strength, durability, operating temperature) in order for the materials to function suitably in an aircraft engine environment. This requires experimentation with the material compositions and constituents to identify the optimal materials that will result in the properties that we need. To meet the requirements for the fabrication of CMCs, the additive manufacturing machine must have the ability for powder bed processing with binder jetting for the buildup of parts layer upon layer. The machine must be versatile in its capability so that it is suitable for printing with powders which support the manufacturing of ceramic materials (SiC powders and SiC chopped fibers). The build volume should be sufficient for research and development with the ability to manufacture parts that are at least 6" length x 2.5" width x 2.5" height. For a machine that achieves only the minimum build volume, the ceramic manufacturing processes should be transferrable to an additive manufacturing machine that has a larger build volume. The print speed per layer should be 30-60 seconds. The layer thicknesses should be variable with a minimum of 0.002" (50.8 µm). Print resolution of 63.5 µm/60.0 µm/50-100 µm in the X/Y/Z directions is required. Powder size capability should be in the 15-50 microns range. The printer should use piezo-electric printheads which allows for precise jetting control of binder materials and the use of lower temperature binders compared to thermal printheads. Computer operation and interface software is required for print control, printer maintenance, and slicing of build layouts with data interface formats to include STL, CLI, and SLC. The overall system should be integrated with capability for oven curing and furnace sintering of printed parts. The powder bed processing should allow for the tailoring of ceramic powder blends and the incorporation of fiber reinforcement and be suitable for the additive manufacturing of ceramics and ceramic matrix composites (CMCs) consisting of oxide and non-oxide ceramics. Therefore it is more cost effective and in the best interest of the government to purchase the ExOne binder jetting machine and eliminate the need for an external contract to complete the process development that is needed to fabricate durable and fully-dense CMC's. The capability will allow for a direct continuation of the previous CMC development using additive manufacturing without the delays and increased cost that would be required for different and less suitable equipment. The Government intends to acquire a commercial item using FAR Part 12.Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:30 p.m. local time on August 31, 2016. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.Oral communications are not acceptable in response to this notice.NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html        

HARDWOOD DUNNAGE FOR DECK BARGES

Department of the Army, U.S. Army Corps of Engineers | Published June 22, 2016  -  Deadline July 20, 2016
cpvs

The U.S. Army Corps of Engineers is issuing a combined synopsis/solicitation to provide rough sawn hardwood boards. This will be a Low Price procurement, in accordance with FAR Part 12, resulting in a Firm Fixed Price Contract. Please submit a capabilities statement that includes DUNS, CAGE, and Business Size in accordance with the selected NAICS. Please submit to Ms. Gayle Geiger, gayle.geiger@usace.army.mil. Contract will be awarded to the lowest price to offerer. Bids are due to Gayle Geiger NLT 20 JUL 2016 @ 1200 Noon. E-mail is preferred gayle.geiger@usace.army.mil This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii) The solicitation number is W912P4-16-T-0029 and is issued as a request for quotation (RFQ) (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83. (iv) This required is set aside for small business. NAICS code is 321918 with a size standard $500.00. (v) Offerors shall provide pricing on company letterhead. (vi) The contractor shall supply all material. Additional information are in the attached statement of work. (vii) Delivery of all items shall be made with 42 calendar days of the award of contract. Delivery of all items shall be made with 42 calendar days of the award of contract. The exact service dates shall be coordinated with the USACE staff. (viii) The provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition. (ix) Provision 52.212-2, Evaluation -- Commercial Items applies. Award will be made to the offeror who provides the lowest acceptable price. (x) Offerors shall be registered at SAM.Gov in order to be eligible for award. (xi) Clause 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. (xii) A statement that the clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. The following additional clauses apply within 52.212-5: 52.204-10, 52.209-6, 52.219-6 (xiii) Submit a quote using attached Bid Sheet to gayle.geiger@usace.army.mil (xiv) Not used.(xv) Quotes are due NLT 20 JUL 2016 @ 1200 Noon to the email listed in xiii. (xvi) Contact Gayle Geiger at 716-879-4211 with any questions. This solicitation is being issued in electronic format only. Hard copies of the solicitation will not be available and written or fax requests will not be accepted. Contractors may download the solicitation (and any amendments) via the FedBizOpps web site, www.fbo.gov. All amendments to the RFQ will be posted to the FedBizOpps web site. It is the offerors responsibility to monitor the FedBizOpps web site for any amendments. Interested firms must register at FedBizOpps in order to access the solicitation. Offerors are responsible for printing copies of the RFP and any amendments. Proposed quotes are due by NLT 20 JUL 2016 @ 1200 Noon. All quotes are to be submitted electronically to gayle.geiger@usace.army.mil All contractors are required to be registered in System for Award Management (SAM) before award. The System for Award Management (SAM) is the official U.S. government system that consolidates the capabilities of CCR/FedReg, ORCA and EPLS. There is NO fee to register for SAM. If you used any of the previous systems, you should now go to www.sam.gov to update your information. SAM training tools and quick-start guides are available on both the SAM and Federal Service Desk websites, located at www.sam.gov and www.fsd.gov. Questions can be directed to gayle.geiger@usace.army.mil. This office will not accept any telephonic, written, or faxed requests for a copy of the solicitation.

Towing Bridle Lines Tug

Department of the Army, U.S. Army Corps of Engineers | Published February 8, 2016  -  Deadline February 10, 2016
cpvs

The U.S. Army Corps of Engineers is issuing a combined synopsis/solicitation for Towing Bridle Lines. Provide complete product data for each item with the bid, fully documenting and certifying compliance with all of the specifications per Statement of Work. This will be a Low Price procurement, in accordance with FAR Part 12, resulting in a Firm Fixed Price Contract. Please submit a capabilities statement that includes DUNS, CAGE, and Business Size in accordance with the selected NAICS. Please submit to Ms. Gayle Geiger, gayle.geiger@usace.army.mil and Mr. Frank J. D'Andrea, frank.j.dandrea@usace.army.mil. Contract will be awarded to the lowest price to offerer. Bids are due to Gayle Geiger NLT 02 FEB 2016 @ 1600. E-mail is preferred gayle.geiger@usace.army.mil This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.(ii) The solicitation number is W912P4-16-T-0012and is issued as a request for quotation (RFQ)(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83.(iv) This required is set aside for small business. NAICS code is 314994 with a size standard $1000.00.(v) Offerors shall provide pricing on company letterhead.(vi) The contractor shall supply all materials and ship to specified location. Additional information are in the attached statement of work.(vii) Towing Bridle Lines are to be delivered within 28 days of award. The exact service dates shall be coordinated with the USACE staff.(viii) The provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition.(ix) Provision 52.212-2, Evaluation -- Commercial Items applies. Award will be made to the offeror who provides the lowest acceptable price.(x) Offerors shall be registered at SAM.Gov in order to be eligible for award.(xi) Clause 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition.(xii) A statement that the clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. The following additional clauses apply within 52.212-5: 52.204-10, 52.209-6, 52.219-6(xiii) Submit a quote to gayle.geiger@usace.army.mil(xiv) Not used.(xv) Quotes are due by 1600 pm EST on 02 FEB 2016 to the email listed in xiii.(xvi) Contact Gayle Geiger at 716-879-4211 with any questions.This solicitation is being issued in electronic format only. Hard copies of the solicitation will not be available and written or fax requests will not be accepted. Contractors may download the solicitation (and any amendments) via the FedBizOpps web site, www.fbo.gov. All amendments to the RFQ will be posted to the FedBizOpps web site. It is the offerors responsibility to monitor the FedBizOpps web site for any amendments. Interested firms must register at FedBizOpps in order to access the solicitation. Offerors are responsible for printing copies of the RFP and any amendments.Proposed quotes are due by 02 FEB 2016. All quotes are to be submitted electronically to gayle.geiger@usace.army.milAll contractors are required to be registered in System for Award Management (SAM) before award. The System for Award Management (SAM) is the official U.S. government system that consolidates the capabilities of CCR/FedReg, ORCA and EPLS. There is NO fee to register for SAM. If you used any of the previous systems, you should now go to www.sam.gov to update your information. SAM training tools and quick-start guides are available on both the SAM and Federal Service Desk websites, located at www.sam.gov and www.fsd.gov.Questions can be directed to gayle.geiger@usace.army.mil. This office will not accept any telephonic, written, or faxed requests for a copy of the solicitation.

SPUD AND DECK WINCHES FOR DERRICK BOAT MCCAULEY

Department of the Army, U.S. Army Corps of Engineers | Published March 17, 2016  -  Deadline March 31, 2016
cpvs

The U.S. Army Corps of Engineers is issuing a combined synopsis/solicitation to provide two (2) new electric spud winches for the Derrick Boat McCauley, painted yellow and two (2) new electric deck winches for the Derrick Boat McCauley, painted yellow. Also, to provide two (2) magnetic reversing motor starters / control stations matched to the winches, with push button controls, suitable for mounting on deck near the winches. This will be a Low Price procurement, in accordance with FAR Part 12, resulting in a Firm Fixed Price Contract. Please submit a capabilities statement that includes DUNS, CAGE, and Business Size in accordance with the selected NAICS. Please submit to Ms. Gayle Geiger, gayle.geiger@usace.army.mil and Mr. Frank J. D'Andrea, frank.j.dandrea@usace.army.mil. Contract will be awarded to the lowest price to offerer. Bids are due to Gayle Geiger NLT March 17, 2016 @ 1600. E-mail is preferred gayle.geiger@usace.army.mil This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.(ii) The solicitation number is W912P4-16-T-0017 and is issued as a request for quotation (RFQ)(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83.(iv) This required is set aside for small business. NAICS code is 333923 with a size standard $500.(v) Offerors shall provide pricing on company letterhead.(vi) The contractor shall supply all supplies. Additional information are in the attached statement of work.(vii). The exact service dates shall be coordinated with the USACE staff.(viii) The provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition.(ix) Provision 52.212-2, Evaluation -- Commercial Items applies. Award will be made to the offeror who provides the lowest acceptable price.(x) Offerors shall be registered at SAM.Gov in order to be eligible for award.(xi) Clause 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition.(xii) A statement that the clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. The following additional clauses apply within 52.212-5: 52.204-10, 52.209-6, 52.219-6(xiii) Submit a quote using attached Bid Sheet to gayle.geiger@usace.army.mil(xiv) Not used.(xv) Quotes are due March 17, 2016 @ 1600 to the email listed in xiii.(xvi) Contact Gayle Geiger at 716-879-4211 with any questions.This solicitation is being issued in electronic format only. Hard copies of the solicitation will not be available and written or fax requests will not be accepted. Contractors may download the solicitation (and any amendments) via the FedBizOpps web site, www.fbo.gov. All amendments to the RFQ will be posted to the FedBizOpps web site. It is the offerors responsibility to monitor the FedBizOpps web site for any amendments. Interested firms must register at FedBizOpps in order to access the solicitation. Offerors are responsible for printing copies of the RFP and any amendments.Proposed quotes are due by March 17, 2016 @ 1600.. All quotes are to be submitted electronically to gayle.geiger@usace.army.milAll contractors are required to be registered in System for Award Management (SAM) before award. The System for Award Management (SAM) is the official U.S. government system that consolidates the capabilities of CCR/FedReg, ORCA and EPLS. There is NO fee to register for SAM. If you used any of the previous systems, you should now go to www.sam.gov to update your information. SAM training tools and quick-start guides are available on both the SAM and Federal Service Desk websites, located at www.sam.gov and www.fsd.gov.Questions can be directed to gayle.geiger@usace.army.mil. This office will not accept any telephonic, written, or faxed requests for a copy of the solicitation.

AIR COMPRESSORS, CONTROLLERS AND SWITCHES FOR TUG CHERAW AND DERRCKBOAT MCCAULEY

Department of the Army, U.S. Army Corps of Engineers | Published March 21, 2016  -  Deadline March 31, 2016
cpvs

The U.S. Army Corps of Engineers is issuing a combined synopsis/solicitation for Provide three (3) air compressors, provide three (3) motor controllers / starters, and provide three (3) pressure switches per Statement of Work. This will be a Low Price procurement, in accordance with FAR Part 12, resulting in a Firm Fixed Price Contract. Please submit a capabilities statement that includes DUNS, CAGE, and Business Size in accordance with the selected NAICS. Please submit to Ms. Gayle Geiger, gayle.geiger@usace.army.mil and Mr. Frank J. D'Andrea, frank.j.dandrea@usace.army.mil. Contract will be awarded to the lowest price to offerer. Bids are due to Gayle Geiger NLT March 31, 2016 @ 1600. E-mail is preferred gayle.geiger@usace.army.mil This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.(ii) The solicitation number is W912P4-16-T-0015 and is issued as a request for quotation (RFQ)(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83.(iv) This required is set aside for small business. NAICS code is 336611 with a size standard $750.(v) Offerors shall provide pricing on company letterhead.(vi) The contractor shall supply all supplies per Statement of Work. Additional information are in the attached Statement of Work. (vii). The exact service dates shall be coordinated with the USACE staff.(viii) The provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition.(ix) Provision 52.212-2, Evaluation -- Commercial Items applies. Award will be made to the offeror who provides the lowest acceptable price.(x) Offerors shall be registered at SAM.Gov in order to be eligible for award.(xi) Clause 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition.(xii) A statement that the clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. The following additional clauses apply within 52.212-5: 52.204-10, 52.209-6, 52.219-6(xiii) Submit a quote using attached Bid Sheet to gayle.geiger@usace.army.mil(xiv) Not used.(xv) Quotes are due by March 31, 2016 @ 1600 to the email listed in xiii.(xvi) Contact Gayle Geiger at 716-879-4211 with any questions.This solicitation is being issued in electronic format only. Hard copies of the solicitation will not be available and written or fax requests will not be accepted. Contractors may download the solicitation (and any amendments) via the FedBizOpps web site, www.fbo.gov. All amendments to the RFQ will be posted to the FedBizOpps web site. It is the offerors responsibility to monitor the FedBizOpps web site for any amendments. Interested firms must register at FedBizOpps in order to access the solicitation. Offerors are responsible for printing copies of the RFP and any amendments.Proposed quotes are due March 31, 2016 @ 1600. All quotes are to be submitted electronically to gayle.geiger@usace.army.milAll contractors are required to be registered in System for Award Management (SAM) before award. The System for Award Management (SAM) is the official U.S. government system that consolidates the capabilities of CCR/FedReg, ORCA and EPLS. There is NO fee to register for SAM. If you used any of the previous systems, you should now go to www.sam.gov to update your information. SAM training tools and quick-start guides are available on both the SAM and Federal Service Desk websites, located at www.sam.gov and www.fsd.gov.Questions can be directed to gayle.geiger@usace.army.mil. This office will not accept any telephonic, written, or faxed requests for a copy of the solicitation.

R--TECHNICAL INFORMATION ADMINISTRATION AND LOGISTICS SERVICES TIALS-2

National Aeronautics and Space Administration, Glenn Research Center | Published July 1, 2014  -  Deadline October 17, 2014
cpvs

NASA/GRC plans to issue a Request for Proposal(RFP)for on-site logistics support services as follows: 1.0 LOGISTICS SERVICES Property/Equipment Management receives, tracks, stores, screens, redistributes, and disposes of Glenn property. This area maintains the system that tracks equipment; produces and maintains records for lost, damaged, or destroyed equipment; conducts annual physical inventories; tracks and documents loans of Government property; and tracks capitalized equipment. Staff members pick up, receive, inspect, redistribute, warehouse, and maintain records for all excess property, including scrap material; prepare computing equipment for reuse; process requests for the reuse or donation of excess and surplus property; conduct Internet auctions of surplus property; manage Glenns Hold Storage system for stock items; conduct an annual inventory; and maintain a website. Supply Management identifies, documents, and physically controls all inventory items by identifying storage space; managing, warehousing, and maintaining stores stock, program stock, and standby stock (including hazardous chemicals); shipping and receiving hazardous drums and cylinders; and managing returnable containers. Staff members also provide standard and clean-room laundry services and monitor, track, and control the tool cribincluding machining and fabrication test equipment, hardware, and software. Freight Traffic encompasses traffic management, shipping, and receiving. This includes ensuring custody and centralized control over inbound and outbound shipments, packing items and completing shipping documents, maintaining forms and documentation, processing and distributing freight bills, and resolving overdue notices for collect freight bills. Transportation conducts studies for proposed transportation activities; provide bus transportation for personnel; and load, unload, pick up, and deliver instruments, machinery, office equipment, printed matter, and interoffice and U.S. Postal Service mail. In addition, recyclable materials and hazardous materials and waste are picked up and transported to designated locations. Staff members maintain Glenns vehicles, operate the motor vehicle dispatch service, and operate, manage, and keep records for motor pool vehicles, other Government vehicles, fuels, and the garage. Move Operations provides technical leadership, guidance, and logistics for all Glenn personnel moves and analyzing all move requests in accordance with guidelines. 2.0 STOCK PURCHASES Stock Purchases uses the NASA Glenn Supply Management Systems to administer the Glenn supply management program consisting of stores stock and program stock. 3.0 MEDIA SERVICES Media Services helps Glenns researchers document and publish their results and achievements. Staff members provide publishing, duplicating, imaging, and educational program services for Glenn as well as computer application support for the Logistics and Technical Information Division and editing and proposal support. Publishing services include editing; the preparation and manipulation of photographs, illustrations, and drawings; electronic document formatting; and information management services and a customer interface for scientific and technical documents as well as publishing not related to research. This includes illustrations and design for printing, projected visuals, exhibits, displays, presentations, three-dimensional models, and Web pages. The Imaging Technology Center provides photographic, imaging, and animation support for aeronautical research, engineering, physical science, and other programsboth to document technical research and events and to inform the public of research advances. Educational Services creates projects and opportunities that attract and retain students in science, technology, engineering, and mathematics disciplines. Staff members support technical writing and editing, award nomination coordination and package preparation, and new proposal coordination and publication support. Duplicating Services duplicates, assembles, binds, addresses, and prepares documents for distribution; repairs and maintains Government-owned office equipment; sends out orders for printing by the Government Printing Office. Forms Management creates and maintains all Glenn forms. 4.0 RECORDS MANAGEMENT AND HISTORY OFFICE Records Management provides a variety of services to ensure that Glenns functions are documented adequately in accordance with regulation and business needs. The core of this function is the understanding and application of National Archives regulations as they pertain to records creation, maintenance, storage, accessibility, safeguarding, and disposition. Staff members maintain and manage their own inactive records storage facility, which requires preparing boxes for storage, tracking through a database, and retrieval whenever necessary. Records management is a customer-service-focused organization that assists employees with understanding and applying records retention schedules, developing file plans and inventories, and assisting with records clean-up activities. Records search and retrieval for Freedom of Information Act requests, audit activities, and research projects are other key services. History Office provides the oversight and management of the Centers archives through collection development, appraisal of materials, description of materials, and ensuring accessibility through the creation of finding aids. The History Office provides both a basic reference service and more in-depth research of historical topics. This is done through the exploration of current archival holdings, materials held by records management, and interaction with retirees through oral history interviews. Research is documented through historical writing ranging from essays to peer-reviewed books, exhibits, and Web applications. Of particular focus is the documentation of historic facilities as required by the Historic Preservation Act. The History Office works closely with the Centers historic preservation officer and the State Historic Preservation Office to ensure that mitigation requirements are met when a historic facility is demolished or altered. 5.0 LIBRARY AND LEARNING CENTER The Glenn Science & Engineering Library provides librarians and clerical support for Glenns library, including participation on NASA teams for operating the NASA Digital Library. This includes charging and discharging materials, issuing late and recall notices, preparing materials, and routing to successive requestors, as well as receiving, processing, shelving, or filing books, journals, research reports, specifications, microfiche, and other library materials. The area acquires books, subscriptions, specifications and standards, documents, audiovisual materials, microforms, and CDROMs and other electronic materials for the Library. This involves purchasing subscriptions and maintaining library copies and records: ordering books, other documents, and audiovisual materials; and processing interlibrary loan requests to other libraries and from other NASA libraries. New and previously uncatalogued library collection materials are catalogued, and comprehensive reference services are provided. This area also provides local computer support for electronic library systems, administers Glenns Bibliographic Web database, and conducts outreach activities to promote the library and its services. The Learning Center provides about 1200 individual instruction classes for civil service and support service contractor personnel in many different disciplines. 6.0/7.0 ADMINISTRATIVE AND CLERICAL SERVICES Administrative Services include project coordination, database and spreadsheet maintenance, data analysis, Web content maintenance, and configuration management. Clerical Services provides branch, division, and office support including, but not limited to expense reports, acquisition support, meeting support and minutes, correspondence preparation, workshop coordination, calendar management, and office coverage. 8.0 METROLOGY The Calibration Lab inspects, repairs, and calibrates instrumentation used for test and measurement using standards that are traceable to the National Institute of Standards and Technology and that are derived from natural physical constants, radio measurements, or comparison to consensus standards. This service includes metrology-oriented engineering consultation, metrology networking, and leveraging other Government laboratories. The Government anticipates awarding a cost-plus-fixed-fee/award-term contract with one (1) base year, four (4) one-year options, and two (2) award term years which may be earned in years 4 and 5 of the contract, respectively. The contract will also contain the Option to Extend Services clause which provides the option to extend the term of the contract by up to six months. This procurement is a follow-on to the existing conract NNC05CB17C (TIALS) with SGT, Inc. The current contract and other related documents releaseable under FOIA are available at http://www.grc.nasa.gov/WWW/FOIA/Re adingRm.htm . There will be an Industry Day at the Glenn Research Center providing general information about this procurement and an opportunity to ask questions on July 28, 2014. An explanatory letter and a registration form are attached. Pre-resgistration is required. The Government does not intend to acquire a commercial item using FAR Part 12. This procurement is a total small business set-aside. The NAICS Code and Size Standard are 561210 and $35.5 million, respectively. All responsible sources may submit an offer which shall be considered by the agency. The anticipated release date of the RFP is on or about September 2, 2014 with an anticipated offer due date of on or about October 17, 2014. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . The solicitation and any documents related to this procurement will be available over the Internet. These documents will reside on a World Wide Web (WWW) server, which may be accessed using a WWW browser application. The Internet site, or URL, for the NASA Business Opportunities home page is http://procurement.na sa.gov/cgi-bin/EPS/bizops.cgi?gr=D&pin= . It is the offeror's responsibility to monitor the Internet site for the release of the solicitation and amendments (if any). Potential offerors will be responsible for downloading their own copy of the solicitation and amendments (if any).
  • 1