Public tenders for envelope in Canada

Find all Printing tenders in the world.
Finding business opportunities has never been easier.

Results for printing. Make a new search!

Envelope – All purpose (Large)

Elections Canada | Published February 17, 2017
Winner
PBS International Ltd
cpvs

Envelope – All purpose (Large)

Envelope – All purpose (Large)

Elections Canada | Published December 8, 2016  -  Deadline January 17, 2017
cpvs

Envelope – All purpose (Large)

ENVELOPE, MAILING

Department of National Defence | Published August 13, 2014
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: The bidder must supply Canadian goods and/or services Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: ENVELOPE, MAILING W8486-151476/A Gariepy, Jacques Telephone No. - (613) 998-8582 Summary This procurement is not subject to all Comprehensive Land Claims Agreements (CLCA) as any resultant contract will not be sent to the CLCA areas. The Department of National Defence (DND) has a requirement for the printing and delivery of DND 322 Envelopes (10" x 13" open-end envelope, double sideseam, prints black) . 750,000 Envelopes to Montreal + (10 samples to Ottawa); Bidders must provide a list of names, or other related information as needed, pursuant to section 01 of Standard Instructions 2003 (preferably with their bid). The requirement is subject to the provisions of the Agreement on Internal Trade (AIT). This procurement is limited to Canadian good and/or services. Delivery date: The Contractor must deliver all material to one (1) destination in Montreal on or before October 15, 2014 Basis of Selection: A bid must comply with all requirements of the bid solicitation to be declared responsive. The responsive bid with the lowest evaluated price will be recommended for award of a contract. THE REQUIREMENT IS LIMITED TO CANADIAN SUPPLIERS. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Building Envelope Rehabilitation

Fisheries and Oceans Canada | Published September 26, 2017  -  Deadline October 17, 2017
cpvs

Trade Agreement: Canadian Free Trade Agreement (CFTA) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   Building Envelope Rehabilitation  F1700-174255/A Arthur (PWY), Carolyn Telephone No. - (604) 364-2752 (    ) Fax No. - (604) 775-6633 (    )  Title: Building Envelope Remediation  Location:  Kitsilano Coast Guard Station, Vancouver, BC  Work Description:  The Department of Fisheries & Oceans is currently in the design process for a full building envelope restoration at the Kitsilano Coast Guard Base.      The work, covered further in the contract documents, includes, but is not limited to:   - Replacement of windows, doors, wall framing, roofing, stair case and guardrails. - Demo and removal of roof material, exterior finishes, soffit, handrails, window, doors and stairs.   - New framing yet not limited to: window openings, roof corners, handrails, stairs, walls around stairs, additional exterior insulation framing.   - All effected interior finishes are to be reinstated as prior to construction condition. Precautions are to be taken yet not limited to: environmental impact of the marine environment, working at heights, working over water, and limited operational space. All work is to be done in accordance with the drawings and specifications.  Optional Site Visit:  Contractors are strongly recommended to visit the site prior to submitting a tender for this work and to make inquiries or investigations necessary to become thoroughly acquainted with the site as well as the nature and extent of the work.  There will be a site visit on October 5 at 10:00am local time.  Interested bidders are to meet at Kitsilano Coast Guard Station, 1661 Whyte Ave, Vancouver BC.  Safety Attire - It is mandatory that all persons attending the site visit have the proper personal protection equipment (safety glasses, footwear, vests and hard hats etc.). Contractor`s personnel/individuals who do not have the proper safety attire may be denied access to the site.  Delivery Date: The work shall commence immediately upon official notification of acceptance of tender by the Contracting Authority and is to be completed March 01, 2018.  Value of Project:  To assist with bonding and insurance requirements, this project is estimated to cost about $1,000,000.00  Tender Enquiries: Carolyn Arthur Supply Specialist Tel: (604)364-2752 Email:  Carolyn.Arthur@pwgsc.gc.ca   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Laboratory Annex Exterior Envelope Replacement, Lethbridge, Alberta

Public Works and Government Services Canada | Published November 22, 2016  -  Deadline March 1, 2017
cpvs

Trade Agreement: NAFTA/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Lethbridge Research and Development Centre  Laboratory Annex Exterior Envelope Replacement, Lethbridge, Alberta.    EP922171910/A Tikhonovitch (RPC), Alex Telephone No. - (780) 901-7940  Fax No. - (780) 497-3510  Email: alex.tikhonovitch@pwgsc-tpsgc.gc.ca  Public Works & Government Services Canada (PWGSC) requires the services of an architectural firm, acting as prime consultant with a multi-disciplinary team of subconsultants for the provision of service required for design work to replace the Laboratory Annex exterior wall building envelope and roof.  The proponent shall be a firm, licensed, oreligible to be licensed to provide the necessary professional services to the full extent that may be required by law in Alberta.  This Request for Proposal is a 1 stage, 1 phase selection process. This means that the proponent must submit all technical information as phase 1, and at the same time, they must also submit their cost proposal in a separate sealed envelope. Ensure that information related to fees or costs are not included with the technicalportion of the proposal.  This procurementis subject to the provisionsofthe North American Free Trade Agreement (NAFTA).      Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Request for Proposal – Services for a Building Envelope Assessment

National Research Council | Published September 30, 2015  -  Deadline September 11, 2015
cpvs

Request for Proposal – Services for a Building Envelope Assessment NRC facilities across Canada utilizing a Small Unmanned Aerial System (sUAS) REQUIREMENT The National Research Council (NRC) is the Government of Canada's premier research and technology organization (RTO). Working with clients and partners, the NRC provides innovation support, strategic research, scientific and technical services. The NRC has just what industry needs: infrastructure, personnel, equipment, experience and networking capabilities. The NRC offers access to leading technology equipment, research and training programs and provides industry with a lower-risk way to develop innovative ideas, reduce start-up costs, and shorten time to market. The National Research Council accomplishes this with staff and an extensive infrastructure which includes 166 buildings with 530,000 square metres of multipurpose building space. Part of the NRC’s duties is to ensure proper management of the Real Property component of the NRC portfolio. This requires access to up to date roof and exterior wall asset information. The National Research Council, Ottawa, Ontario requires the services of a building envelope specialist to conduct a Building Envelope Assessment of selected NRC facilities across Canada utilizing a Small Unmanned Aerial System (sUAS) to produce a thermal image of the building envelope (roof areas and exterior walls) plus a condition assessment survey of the roofing inventory.

Building Envelope Remediation

Public Works and Government Services Canada | Published May 16, 2016  -  Deadline June 6, 2016
cpvs

Trade Agreement: LCSA/AIT Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Title:   Building Envelope Remediation  Location:  Gulf of Georgia Cannery, Richmond, BC  Work Description:  The project comprises of the partial building envelope repair of the gulf of Georgia Cannery, located at 12138 fourth Avenue, Richmond, BC. The Work to be performed includes: - Providing temporary hoarding if needed - Reviewing testing reports provided with Contract documents - Preparing and painting artifacts such as the Stinkeroo, fish oil tanks, pipes & valves - Repainting Barometric Condenser   - Repainting and Relocation of Ice Machine  - Preparing surfaces and repainting smoke stacks, Stinkeroo stack and dryer shed stack -Reviewing guy wires at smoke stacks and barometric condenser -Making localized repairs at Cedar ShingleRoofs  The Contractor will either furnish a 100% two (2) year Maintenance Bond in accordance with MPI Repainting requirements (and one (1) year on Wood Fences) or provide a Paint Association warranty.  The Contractor shall cooperate with Parks Canada in scheduling operations to minimize conflict and to facilitate usage.  Site Visit:  Contractors are strongly recommended to visit the site prior to submitting a tender for this work and to make inquiries or investigations necessary to become thoroughly acquainted with the site as well as the nature and extent of the work.  There is an optional site visit for prospective bidders on Thursday, May 19, 2016 at 10:00 am PDST at the Gulf of Georgia Cannery Administration building located at 12138 Fourth Avenue, Richmond, BC.  Delivery Date:  The Contractor shall perform and complete the Work within eighteen (18) weeks of Contract award.  Enquiries:   Janie Leung, A/Supply Specialist  Tel: (778) 919-3273 Fax: (604) 775-6633 Email: Janie.Leung@pwgsc.gc.ca  Value of Project:  To assist with bonding and insurance requirements, this project is estimated to cost between  $400,000 to $450,000.  Firms intending to submit tenders on this project should obtain tender (solicitation) documents through Buyandsell.gc.ca/tenders. Addenda, when issued will be available from Buyandsell.gc.ca/tenders. Firms that elect to base their bids on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid.   This procurement office provides procurement services to the public in English.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Building Envelope Services SOA

Public Works and Government Services Canada | Published May 12, 2016  -  Deadline June 21, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Building Envelope Engineering Services SOA (DISO)  EZ899-162637/A Ngan, Ken (TPV) Telephone No. - (604) 658-2755 (    ) Fax No. - (604) 775-6633 E-mail: ken.ngan@pwgsc-tpsgc.gc.ca  Title:  Building Envelope Engineering SOA (DISO) - Public Worksand  Government Services Canada  Location: Various locations across British Columbia & Yukon.  Work Description: Public Works and Government Services Canada (PWGSC) is inviting consulting firms with Architectural Engineering expertise to submit proposals for Standing Offers. This procurement will follow a one phase submission process.  The selected consultants shall provide a range of investigation and recommendation reports, as well as design and construction services for building projects in British Columbia and the Yukon.    Proponents shall be licensed or eligible to be licensed to practice in the province of British Columbia, and in the Yukon Territory. Firms should be able to demonstrate successful delivery of these services for a broad variety of projects over the last five (5) years. In general, the firm and its personnel will be evaluated on the basis of their demonstrated understanding of the scope of services, their approach and methodology to providing those services, the quality of their relevant experience in this area, as well as the cost of the provision of the services.  It is PWGSC's intention to authorize up to three (3) Standing Offers, each for a period of three (3) years from the date of issuing the Standing Offers.  The total dollar value of all Standing Offers is estimated to be $1,050,000.00 (GST included). Individual call-ups will vary, up to a maximum of $250,000.00 (GST included). Proponents should note that there is no guarantee that the full or any amount of the Standing Offers will be called-up; PWGSC will award call-ups only when the specific services to be provided under the Standing Offer are needed.  Tender Enquiries: Ken Ngan, Supply Specialist (604)658-2755  The procurement office provides procurement services to the public in English.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Canso Canal Building Envelope Improvements

Public Works and Government Services Canada | Published December 7, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Comprehensive Land Claim Agreement: No Nature of Requirements: Public Works and Government Services Canada has, on behalf of the Department of Fisheries and Oceans, a requirement for building envelope improvements at the Canso Canal, Port Hastings, Nova Scotia. INQUIRIES: All inquiries of a technical nature andall questions of a contractual nature are to be submitted to the Contracting Authority: Alex Russell, facsimile: (902) 496-5016: email: alex.russell@pwgsc-tpsgc.gc.ca. Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond. Estimated cost of this project is between $1,000,000 and $5,000,000 Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Construction Mgmt for LSL Envelope

Public Works and Government Services Canada | Published February 4, 2016  -  Deadline February 19, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Construction Mgmt for LSL Envelope  EP067-161339/B Hoffman, Amanda Telephone No. - (819) 956-6753  IMPORTANT NOTICE TO BIDDERS: This bid solicitation cancels and supersedes previous bid solicitation number EP067-161339/A dated December 4, 2015 with a closing date of January 14, 2016 at 2:00PM.   PROJECT IDENTIFICATION:  Building Envelope Rehabilitation Project, Louis St-Laurent Building, 555 Boul. de laCarrière, Gatineau, Quebec, Project # R.066872.002  PROJECT DESCRIPTION: Construction Management Services.   Work is to becompleted within twenty-two (22) weeks after contract award. The estimated cost for this opportunity is within the followingcategory: Above $5,000,000.00.  MANDATORY SECURITY REQUIREMENT:   This procurement containsa mandatory security requirement. At bid closing, the Bidder must hold a valid Designated Organization Screening (DOS). Failure to comply with this requirement will render the Bid non-compliant and nofurther consideration will be given to the Bid.   OPTIONAL SITE VISIT:   There will be a site visit on Thursday, February 11, 2016 at 10:00AM. Interested bidders are to meet at the Louis St-Laurent Building, 555 Boul. de la Carrière, Gatineau, QC. All Contractors will be required to sign-in at the back entrance, and therefore must bring a piece of photo ID with them. There are no safety attire requirements for the site visit.  ENQUIRIES:   All enquiries are to be submitted to the PWGSC Contracting Authority: Amanda Hoffman, Tel: 819-956-6753 or E-mail: amanda.hoffman@tpsgc-pwgsc.gc.ca   Enquiries are to be made in writing and should be received no less than five (5) business days prior to the closing date to allow sufficient time to respond.  BID DOCUMENTS: Firms intending to submit bids on this project should obtain bid documents through the Government Electronic Tendering Service at http://Buyandsell.gc.ca/tenders or at the toll-free number 1-855-886-3030.   Amendments, when issued, will be available from the same government electronic tendering service.  Firms that elect to base their bids on bid documents obtained from other sources do so at their own risk and will be solely responsible to inform the bid calling authority of their intention to bid.  BID RECEIVING: Sealed bids will be received at:  Public Works and Government Services Canada, Bid Receiving Unit, Place du Portage, Phase III, Main Lobby Core 0B2, 11 Laurier Street, Gatineau, Quebec, K1A 1C9. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Building Envelope Remediation

Public Works & Government Services Canada | Published December 16, 2014  -  Deadline September 1, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Attachment: YES (MERX) Electronic Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: EZ899-151744/A Fung, Donna (PWY) Telephone No. - (604) 666-9835 Fax No. - (604) 775-6633 Title: Building Envelope Remediation Location: Cascade Port of Entry, Christina Lake, BC Work Description: The work of this contract comprises the building envelope remediation of the Cascade Port of Entry, including the following items: 1. Removal and disposal of existing face seal stucco, coat base and steel mesh, air barrier, flashings and louvres. Temporary relocation and reinstallation of building signage, existing rainwater leaders, soffit, windows and doors and door frames. 2. Investigation of existing wood framing for deterioration. Removal and replacement of existing sheathing, vapour barrier and interior gypsum wall board where deteriorated. 3. Installation of new air barrier, cementitious siding, metal trims and flashings, louvres, wooden window stools and sealant. 4. Painting of reinstalled rain water leaders, hollow metal doors and frames, interior wood sills and gypsum wall board. Canada Border Services Agency staff will occupy premises during the project period during normal operations of 08:00 to 24:00, 7 days a week. Schedule remediation work to minimize conflict with operations and to facilitate usage. Site Visit: A site visit has been scheduled for 22 December 2014 at 10:00 am. Interested bidders are to meet at the Cascade Port of Entry Building: 102 Highway 395 South, Christina Lake, BC V0H 1E0. Bidders are to note that this is not a mandatory site visit and is optional. However, it is recommended that Bidders visit the site prior to solicitation closing. Bidders must communicate via e-mail with the Contracting Officer at least one business day prior to the scheduled site visit to confirm attendance. In the event that the site visit has to be postponed due to inclement weather, bidders will be notified by e-mail. Due to operational and logistics requirements, this is the only site visit scheduled. Bidders are not to attend the site at other times for the purpose of this project without prior authorization. Delivery Date: Complete work by March 31, 2015. Enquiries: Donna Fung, Supply Specialist Tel: (604) 666-9835 Fax: (604) 775-6633 Email: Donna.Fung@pwgsc.gc.ca Value of Project: To assist with bonding and insurance requirements, this project is estimated to cost between $150,000 and $175,000. Firms intending to submit tenders on this project should obtain tender (solicitation) documents through Buyandsell.gc.ca/tenders. Addenda, when issued will be available from Buyandsell.gc.ca/tenders. Firms that elect to base their bids on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid. This procurement office provides procurement services to the public in English. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Building Envelope Remediation Ph. 2

Public Works & Government Services Canada | Published May 1, 2015  -  Deadline May 26, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Attachment: YES (MERX) Electronic Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: EZ899-152417/A Fung, Donna (PWY) Telephone No. - (604) 666-9835 Fax No. - (604) 775-6633 Title: Building Envelope Remediation - Phase 2 Location: Gulf of Georgia Cannery, Richmond, BC Work Description: Work under this contract comprises partial building envelope repair of the Gulf of Georgia Cannery, located at 12138 Fourth Avenue, Richmond, BC. Work to be performed under this Contract includes: 1) Repainting Old Cannery Building, Vitamin Oil Shed, Dryer Shed & Dryer Addition, Open Air Storage Shed, Ice House, and roof ventilators; 2) Repainting of wood windows; 3) Dryer Addition & Evaporator roof renewal; 4) Replacement of deteriorated plank flooring in the Vitamin Oil Shed; 5) Structural repairs to wood elements; and 6) Localized Repairs at Cedar Shingle Roofs. Site Visit: A site visit has been scheduled for 12 May 2015 at 10:00 am. Interested bidders are to meet at the entrance of the Gulf of Georgia Cannery, 12138 Fourth Avenue, Richmond, B.C. Delivery Date: The Contractor shall perform and complete the Work within sixteen [16] weeks from the date of notification of acceptance of the offer. Enquiries: Donna Fung, Supply Specialist Tel: (604) 666-9835 Fax: (604) 775-6633 Email: Donna.Fung@pwgsc.gc.ca Value of Project: To assist with bonding and insurance requirements, this project is estimated to cost between $1,000,000 and $1,100,000. Firms intending to submit tenders on this project should obtain tender (solicitation) documents through Buyandsell.gc.ca/tenders. Addenda, when issued will be available from Buyandsell.gc.ca/tenders. Firms that elect to base their bids on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid. This procurement office provides procurement services to the public in English. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

BLDG ENVELOPE REFIT & WINDOW REPLMT

Canadian Space Agency | Published July 5, 2016  -  Deadline September 8, 2016
cpvs

Trade Agreement: NONE Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   PROJECT IDENTIFICATION:   (CSA15-G1/ Building Envelope Refit and Window Replacement / David Florida Laboratory  Building #65, 3701 Carling Avenue, Ottawa, Ontario, K2H 8S2)   Project description: Construction scope 1. To upgrade existing DFL building envelope & roofing in accordance with all tender issued drawings, specifications & documents. 2. The successful bidder shall be responsible to provide all necessary labour, material and equipment required to carry out and modify the following work: 1. Complete removal of the existing exterior cladding, removal and salvage of associated architectural, mechanical and electrical items attached to the building. 2. Seal all building envelope penetration & provide new exterior insulation. 3. Provide & install complete new exterior envelope assemblies, including wall, door and window assemblies & re-installation of removed items. 4. Provide & install all mechanical & electrical items as shown on drawings. 5. Re-roofing portions of the existing building roofs including providing & installing of miscellaneous associated items such as walkways, access ladders and railings.  Work is to be completed within fifty-two (52) weeks after contract award. The estimated cost for this opportunity is within the following category: $1,000,001 - $5,000,000.   OPTIONAL SITE VISIT:    There will be a site visit on July 19, 2016 at 10h00 am.  Interested bidders who confirmed attendance shall meet at the Shirleys Bay Campus (where the David Florida Laboratory is located), Building #1 main reception, 3701, Avenue Carling, Ottawa.    NOTE: Bidders must confirm attendance by e-mail to Marie-Eve Benoit at marie-eve.benoit@pwgsc-tpsgc.gc.ca by July 13, 2016 at 2h00 p.m. Bidders must provide the information below toconfirm attendance:  full name;    representing company; and  if the individual is an international visitor.   Bidders who do not confirm attendance and who do not provide the requested information will not be allowed access to the site. Bidders will be requested to sign an attendance sheet. No alternative appointment will be given to bidders who do not attend or do not send a representative. Bidders who do not participate in the visit will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.   Site Protocol:   Arrival: Report to building 1 to gain permission to enter the site by registering as a               CSA-DFL visitor (photo ID will be required).  Use Site Visit for Building 65 as the contact name and request visitor parking pass.  Badge: Guest badge will be issued which is to be worn and visible at all times, then               proceed to building65.  Parking: Park in the visitor parking in front of building 65 (P9). Visibly display visitor               parking pass and go to the main lobby Reception desk.  A security Commissionaire and/or CSA-DFL Site Representative will be there to guide             you.  Sign the site attendance sheet.  Departure: Return visitor badge to commissionaire at centre booth prior to exiting campus.  Site Restrictions:  Driving around the campus is prohibited without a secure escort.  NO cameras, cell phones, or ANY electronic devices of any kind are allowed to be used.  Small lock boxes are available at Reception to securely store such small items or leave in locked vehicle.  ENQUIRIES:    All enquiries are to be submitted to the Contractual Authority: Marie-Eve Benoit, Tel: (819) 420-0720 or by email at marie-eve.benoit@pwgsc-tpsgc.gc.ca.    Enquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  BID DOCUMENTS:  Firms intending to submit bids on this project should obtain bid documents through the Government Electronic Tendering Service at http://Buyandsell.gc.ca/tenders or at the toll-free number 1-855-886-3030.   Amendments, when issued, will be available from the same government electronic tendering service.  Firms that elect to base their bids on bid documents obtained from other sources do so at their own risk and will be solely responsible to inform the bid calling authority of their intention to bid.  BID RECEIVING:  Sealed bids will be received at:  Public Works and Government Services Canada, Bid Receiving Unit, Place du Portage, Phase III, Main Lobby Core 0B2, 11 Laurier Street, Gatineau, Quebec, K1A 1C9.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Canada Four Corners Full Envelope Rehabilitation

Public Works and Government Services Canada | Published September 12, 2016  -  Deadline October 19, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Canada Four Corners Full Envelope Rehabilitation  EP783-162280/A Cook, Kristin Telephone No. - (819) 775-7409 Email - kristin.cook@pwgsc.gc.ca  PROJECT IDENTIFICATION R.074138.001, Construction Management Services  Full Envelope Rehabilitation, 93 Sparks Street, Ottawa, Ontario  PROJECT DESCRIPTION To rehabilitate the full exterior envelope of the building Work is to be completed within eighteen (18) months after contract award.  MANDATORY SECURITY REQUIREMENT:   This procurement contains a mandatory security requirement.  At bid closing, the Bidder must hold a valid Designated Organization Screening (DOS) Clearance. Failure to comply with this requirement will render the Bid non-compliant and no further consideration will be given to the Bid.   OPTIONAL SITE VISIT:   All interested bidders are invited to a site visit on September 22, 2016 at 10:00 a.m. at 93 Sparks Street, Ottawa, Ontario.   Safety: Hard hat, safety boots, eye protection and reflective vests are required. There will be a 15 minute Health and Safety site orientation at the start of the visit.  ENQUIRIES: All enquiries are to be submitted to the Contractual Authority: Kristin Cook, Tel: (819) 775-7409 or by email at kristin.cook@tpsgc-pwgsc.gc.ca.  Enquiriesare to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  BID DOCUMENTS: Firms intending to submit bids on this project should obtain bid documents through the Government Electronic Tendering Service at http://Buyandsell.gc.ca/tenders or at the toll-free number 1-855-886-3030.   Amendments, when issued, will beavailable from the same government electronic tendering service.  Firms that elect to base their bids on bid documents obtained from other sources do so at their own risk and will be solely responsible to inform the bid calling authority of their intention to bid.  BID RECEIVING:  Sealed bids will be received at:  Public Worksand Government Services Canada, Bid Receiving Unit, Place du Portage, Phase III, Main Lobby Core 0A1, 11 Laurier Street, Gatineau, Quebec, K1A 1C9.  THIS IS NOT A PUBLIC OPENING  Delivery Date: Above-mentioned  The Crown retains the right to negotiate withsuppliers on any procurement.  Documents may be submitted in either official language of Canada.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

BLDG 54 ENVELOPE CONSERVATION

Public Works and Government Services Canada | Published April 27, 2016  -  Deadline May 17, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   PROJECT IDENTIFICATION:     R.076826.001  CEF Building 54 Envelope Conservation. Building 54, Maple Drive, Central Experimental Farm, Ottawa, Ontario  Project description:  This project requires the conservation of the Building 54 building envelopeincluding the cedar roof, cladding system, and heritage windows Work is to be completed within Thirty-four (34) weeks after contract award. The estimated cost for this opportunity is within the following category: $500,001 to $1,000,000.    MANDATORYSECURITY REQUIREMENT:     There are no security requirement.  OPTIONAL SITE VISIT:    There will be a site visit on Thursday May 5, 2016 at 10am.  Interested bidders shall meet at the front of Building 54, Maple Drive, Central Experimental Farm, Ottawa, Ontario.  Safety Attire  No Requirement.   ENQUIRIES:    All enquiries are to be submitted to the Contractual Authority: M. Jasmin Michaud, Tel: (873) 469-4920, facsimile (819) 956-8335 or by email at jasmin.michaud@tpsgc-pwgsc.gc.ca   Enquiries are to be made in writing and should be received no less than five (5) business days prior to the closing date to allow sufficient time to respond.   BID DOCUMENTS:  Firms intending to submit bids on this project should obtain bid documentsthrough the Government Electronic Tendering Service at http://Buyandsell.gc.ca/tenders or at the toll-free number 1-855-886-3030.   Amendments, when issued, will be available from the same government electronic tendering service.   BID RECEIVING:  Sealed bids will be received at:  Public Works and Government Services Canada, Bid Receiving Unit, Place du Portage, Phase III, Main Lobby Core 0B2, 11 Laurier Street, Gatineau, Quebec, K1A 1C9.     Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Personnel Record Envelope - N7530-21-9056613 - CF 478

Department of National Defence | Published April 29, 2015  -  Deadline May 13, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: The bidder must supply Canadian goods and/or services Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Personnel Record Envelope - N7530-21-9056613 - CF 478 W8486-162656/A Andruchow(CW Div.), Cassandra Telephone No. - 613-993-7846 Fax No. - 613-991-5870 cassandra.andruchow@pwgsc-tpsgc.gc.ca DESCRIPTION: The Department of National Defence has a requirement for the printing, fabrication and delivery of 150,000 custom-made envelope-style gusset folders, "Personnel Record Envelope N7530-21-9056613 CF478". 50,000 Personnel Record Envelopes (2,000 shrink-wrapped packages) must be delivered to Edmonton and 100,000 Personnel Record Envelopes (4,000 shrink-wrapped packages) must be delivered to Montreal. PRINT QUALITY: Informational, to be in accordance with the Public Works and Government Services Canada publication entitled "Quality Levels for Printing" and "Quality Levels for Binding", latest issues. QUANTITIES: 50,000 Personnel Record Envelopes (CFB Edmonton) 100,000 Personnel Record Envelopes (CFB Montreal) FOLDED SIZE: 15" width 10" height 15" width flap x 2-13/16 height at longest point Flap: flap is not a straight cut. Flap angles towards center from left and right edges as per the sample for construction only. FLAT SIZE: 34-1/16"W x 25-12/16"H STOCK: Domtar Colors Smooth - 150lb - TAG - Manilla or approved equivalent (refer to article 4.1 of Part 2 of the bid solicitation) TAPE: Tyvec synthetic (Dupont) 108.5d white or approved equivalent (refer to article 4.1 of Part 2 of the bid solicitation) PRINTING/INK/COLORS: Text: Green ink (PMS 348) on face, back and flap. No bleeds Artwork: Text on Face and Flap differ. Text on Face positioned as per sample for construction and artwork supplied. Text on Flap starts below the last score line and is centered horizontally along the Flap. BINDING/CONSTRUCTION: Custom die-cut envelope style-gusset folders with flap, opening along the 15" width, constructed with center seam on back and reinforced accordion gussets. Construct, fold and tape as per the sample for construction supplied: - Custom die-cut envelope-style folder with flap. - Score and fold for flap and gussets. Three (3) scores per gusset (sides and bottom). - Flap along the 15" width. No glue on flap. Flap must be folded down at score for fold on finished product. Six (6) additional scores for expansion on flap. - Accordion gussets on left and right sides and bottom of envelope-style folder. Gussets measure 1-1/2" wide. Bottom gusset - corners left and right must be closed and tucked in. - Reinforced gussets. Bottom gusset is fully taped. For each of the side gussets, the tape starts at ¼" from the fold for the flap and is taped along the 10" height for approximately 2". - Fold and glue with permanent adhesive as per the sample for construction supplied. Center seam on back of envelope-style folders - 1" overlay (glue on overlay). Bottom overlap - 10/16", glued. - Envelope style-folders must be shrink wrapped in packages of 25. DIE: The Contractor must create the die. FORMS HANDLING: Handwritten All deliverables must be received on or before June 30, 2015. TECHNICAL EVALUATION - MANDATORY CRITERIA Bidders MUST meet all the mandatory requirements of the RFP. No further consideration will be given to Bidders not meeting all the mandatory criteria. The mandatory requirement is: M.1 CORPORATE EXPERIENCE The Bidder must demonstrate that it has been contractually bound to an external* client (outside of the Bidder's own company) to provide a quantity of 50,000 or more custom-printed and fabricated folders with expansion gussets. During the evaluation no corporate experience gained through internal** clients will be accepted or reviewed. The Bidder must provide the following information for each contract: a description of the folders provided by the Bidder, including a description of the required gussets; a description of the printing and fabrication requirements of the folders; the Client information for the Contract * "External client(s)" is defined as clients exterior to the Bidder's own legal entity (or joint venture partnership) and excludes the parent, subsidiaries or other affiliates of the Bidder. ** "Internal client(s)" is defined as clients within the Bidder's own legal entity (or joint venture partnership) and includes the parent, subsidiaries and other affiliates of the Bidder. BASIS OF SELECTION: The responsive bid with the lowest evaluated price will be recommended for award of a contract. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Building Envelope Upgrades in Fisher Branch, MB

Royal Canadian Mounted Police | Published October 18, 2016
Winner
Redi-Form Construction Ltd.
cpvs

Work contained within the contract will be comprised of: Building Envelope Upgrades for 7 Living Quarter units located in Fisher Branch, Manitoba. All work is to be successfully completed by 03 February 2017.

Trade Agreement: Agreement on Internal Trade.

Documents may be submitted in either official language of Canada.

There is a security requirement associated with the requirement.

The Crown retains the right to negotiate with suppliers on any procurement.

The RCMP has published its National Procurement Plan for 2016/17. For further information, please see link: http://www.rcmp-grc.gc.ca/en/rcmp-national-procurement-plan or http://www.rcmp-grc.gc.ca/fr/plan-national-dapprovisionnement-grc

CFIA Building Envelope Replacement

Public Works and Government Services Canada | Published March 23, 2016  -  Deadline April 14, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   CFIA Building Envelope Replacement  EP076-162457/A Hoffman, Amanda Telephone No. - 873-469-4930  PROJECT IDENTIFICATION:    R.067732.001 3851 Fallowfield Road, Canadian Food Inspection Agency (CFIA), Ottawa, Ontario  Project description:    Exterior Brick and Precast Panel Replacement  Work is to be completed within thirty-seven (37) weeks after contract award. The estimated cost for this opportunity is within the following category: $1M to $5M.    MANDATORY INDUSTRIAL SECURITY REQUIREMENT:     This procurement contains a mandatory security requirement.  At bid closing, the Bidder must hold a valid Designated Organization Screening (DOS) at level of Reliability Status. Failure to comply with this requirement will render the Bid non-compliant and no further consideration will be given to the Bid.   OPTIONAL SITE VISIT:    There will be a site visit on Thursday, April 7 at 10:00AM. Interested bidders are to meet at the front gate of 3851 Fallowfield Road, Canadian Food Inspection Agency (CFIA), Ottawa, Ontario. Names of individuals, Company Names and Telephone Numbers that will be attending the site visit must be submitted by each bidder no later than Tuesday, April 5 at 2:00PM.  All Contractors will be issued a day pass upon verification of a valid piece of ID. The job showing will occur outdoors. There are no mandatory health and safety requirements for this site visit.   Parking: Parking is free at the front of the building, past the front gate.   ENQUIRIES:    All enquiries are to be submitted to the Contractual Authority: Amanda Hoffman Tel: 873-469-4930 or by email at amanda.hoffman@tpsgc-pwgsc.gc.ca.    Enquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  BID DOCUMENTS:  Firms intending to submit bids on this project should obtain bid documents through the Government Electronic Tendering Service at http://Buyandsell.gc.ca/tenders or at the toll-free number 1-855-886-3030.   Amendments, when issued, will be available from the same government electronic tendering service.  Firms that elect to base their bids on bid documents obtained from other sources do so at their own risk and will be solely responsible to inform the bid calling authority of their intention to bid.  BID RECEIVING:  Sealed bids will be received at:  Public Works and Government Services Canada, Bid Receiving Unit, Place du Portage, Phase III, Main Lobby Core 0B2, 11 Laurier Street, Gatineau, Quebec, K1A 1C9. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

ENVELOPE,MAILING DND323

Department of National Defence | Published December 5, 2016  -  Deadline December 20, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: The bidder must supply Canadian goods and/or services Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   ENVELOPE,MAILING DND 323  W8486-173531/A Werk(cw), Janet Telephone No. - (613) 998-3968 janet.werk@pwgsc-tpsgc.gc.ca  Summary The Department of Defence as a requirement to manufacture and print DND 323 (09-2012) 15 x 9 ½ open side mailing envelopes print black and have them delivered to three (3) Canadian destinations on or before Feb 28, 2017.  QUANTITIES:  Montreal:  1,000,000 envelopes (500 envelopes per box) Edmonton: 500,000 envelopes (500 envelopes per box) Ottawa:     10 sample envelopes  There are no security requirements associated with this requirement.  The requirement is subject to the provisions of the Agreement on Internal Trade (AIT). The requirement is limited to Canadian goods and/or services. This procurement is not subject to the Comprehensive Land Claims Agreement(s)  4.1 Evaluation Procedures  (a) Bids will be assessed in accordance with the entire requirement of the bid solicitation including the technical and financial evaluation criteria.  (b) An evaluation team composed of representatives of Canada will evaluate the bids.  4.1.1  Technical Evaluation Mandatory Technical Criteria.  M.1   CORPORATE EXPERIENCE   The Bidder must demonstrate that it has been contractually bound to an external client (outside of the Bidder's own company) or to external clients* for two (2) contracts to manufacture and print to final format and delivery to the destination address or addresses. Each of these two (2) contracts must have been for a minimum of 500,000 envelopes for each contract.  The Contracts must have been started or completed after April 01, 2012.  *During the evaluation no corporate experience gained through internal clients will be accepted or reviewed.  The Bidder must provide the followinginformation for each contract:  a a description of the envelopes provided by the Bidder under each of these contracts b quantity of the envelopes provided per print run as well as the total quantity provided per year for each contract. c the start date or the completion date of the Contract as required to demonstrate that the contract was started or completed after April 01, 2012; d the Client information for the Contract e proof of contract (i.e. a copy of the invoice copy of contract/Purchase order work request or docket)  PROPOSALS NOT MEETING ALL OF THE MANDATORY REQUIREMENTS WILL BE CONSIDERED NON RESPONSIVE AND GIVEN NO FURTHER CONSIDERATION.  4.2. Basis of Selection A bid must comply with the requirements of the bid solicitation and meet all mandatory technical evaluation criteria to be declared responsive. The responsive bid with the lowest evaluated price will be recommended for award of a contract.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

CSB Envelope Recapitalization

Environment Canada | Published June 16, 2016  -  Deadline July 13, 2016
cpvs

Trade Agreement: LCSA/AIT Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: Yes Nature of Requirements:   K4A22-170081/A Yi (PWY), Patty Telephone No. - (778) 919-2578  Fax No. - (604) 775-6633   Title:  COMBINED SERVICES BUILDING ENVELOPE RECAPITALIZATION Location:  Combined Services Building (CSB), Whitehorse, Yukon  Work Description: Work of this Contract comprises the renovation of the wall assembly on the Environment Canada Combined Services Building (CSB), located at 91782 Alaska Highway, Whitehorse, Yukon as described in the attached plans and specifications.  Work of this Contract includes the supply of all labour and materials for the installation of a new insulated metal panel wall assembly including new windows and doors on the existing 1,127 square meter, pre- engineered steel building, but is not limited to the following: .1 Demolition of existing metal wall finish, trims, flashings, eavestroughs and downspouts, fiberglass batt insulation, sub-girt clips and girts, mechanical and electrical components. .2 Installation of z-girts and installation of new insulated metal panel wallassembly including new trims and flashings. .3 Installation of new fiberglass windows, metal doors and frames, and overhead sectional doors with electric operators. .4 Installation of new eavestroughs and downspouts. .5 Modification of existing mechanical and electrical penetrations as necessary to accommodate new wall assembly and flashings. .6 Modification of existing roof flashings to accommodate new wall assembly. .7 Installation of new bollards and re-painting of existing bollards and interiordoor jamb guards. .8 Installation of new steel columns and wind girts as indicated. .9 New exterior recessed lighting and plugs. .10 Co-ordination of sub-contractors. .11 Liaison with Owner and Consultant team members including architect. .12 Securing and paying for all fees and permits. .13 Mobilization and demobilization costs. .14 All work within the extent of contract. .15 Construction waste management with a target of 75% waste diversion. .16 Dumpster, construction fencing, and portable toilet rental and coordination of all rental costs (including all heavy and light equipment). .17 Coordination and management of all staging areas. .18 Site cleanliness, including progressive cleaning.  Mandatory Site Visit: A Mandatory Site Visit hasbeen scheduled on June 23, 2016 at 2:00pm PDST.  Interested Bidders are to meet in the lobby of the  Environment Canada Combined Services Building (CSB), located at 91782 Alaska Highway, Whitehorse, Yukon  Interested bidders should wear personal protective equipment (such as:  hardhat, high visibility vest, work boots) to the site visit.  Bidders are responsible for making their own travel arrangements. Interested bidders are requested to provide their name(s) and company name(s) to the Contracting Authority, Patty Yi (778) 919-2578 or patty.yi@pwgsc.gc.ca by  1430  PDST on  June 21, 2016, if you will be attending site visit.  Any clarifications or changes to the bid solicitation resulting from site visit will be included as an amendment/addendum.   No questions will be answered at the site-visit.  All questions must be submitted in writing to the Contracting Authority, Patty Yi via fax (604) 775-6633 or email patty.yi@pwgsc.gc.ca.  Completion Date: The Contractor must reach Substantial completion by August 31, 2017.  Inquiries: Patty Yi, Supply Specialist  Tel: (778) 919-2578 Fax: (604) 775-6633 Email:  patty.yi@pwgsc.gc.ca  Value of Project:  To assist with bonding and insurance requirements, this project is estimated tocost between $900,000.00 to $ 1,100,000.00.  Firms intending to submit proposals on this project should obtain tender (solicitation) documents through Buyandsell.gc.ca/tenders. Addenda, when issued will be available from Buyandsell.gc.ca/tenders. Firms thatelect to base their proposals on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid.   This procurement office providesprocurement services to the public in English.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.