« Back to Search« Back to SearchSearch » Work gloves  Polska Grupa Górnicza Sp. z o.o.

Work gloves

  Katowice Poland — Polska Grupa Górnicza Sp. z o.o.
Published November 10, 2017 — Deadline November 24, 2017 (a year ago)
|
Notice type
Contract notice
Public Procurement Law (Journal of Laws of 2015, item 2164, as amended) and on the basis of relevant implementing rules.

The subject of the order was divided into 11 tasks.

The product will be used in an explosive atmosphere.

These gloves are designed to protect your hands when performing any work requiring precision.

Gloves should meet the requirements of EN 388 and PN-EN 420 (skin-free product composition) or PN-EN 420 + A1 (leather composition).

Protective gloves, tested according to the test methods described in the standard

EN 388, must correspond to the performance levels of at least 4 1 3 1.

The antistatic properties of the glove must be tested and confirmed in accordance with

with the test methods described in PN-EN 16350 standard.

This product will be used in an explosive atmosphere.

Five-finger protective gloves must:

have an anatomical thumb,

be made of a fabric or a polymer-coated knit in the whole palm and partly in the dorsal part (fingers)

provide a sure grip,

to be finished with a welter,

Designed for carrying wet, smooth and slippery objects.

Gloves must meet the requirements of PN-EN 420 + A1.

Protective gloves, tested according to the test methods described in the standard

EN 388, must correspond to the performance levels of at least 4.2.2.2.

The antistatic properties of gloves must be tested in accordance with the test methods described in PN-EN 16350.

This product will be used in an explosive atmosphere.

Five-finger protective gloves must:

have an anatomical shape,

give the employee a firm grip,

Gloves must meet the requirements of EN 420 + A1, PN-EN 374-1, PN-EN 388.

Protective properties against chemical substances and glove micro-organisms, tested in accordance with test methods described in PN-EN 374-1, both in terms of resistance to chemical penetration and penetration resistance.

Protective gloves, tested according to the test methods described in the standard

EN 388, must correspond to the performance levels of at least 2 1 0 1.

Letter code according to PN-EN 374-1 standard at least: JK L.

The antistatic properties of gloves must be tested in accordance with the test methods described in PN-EN 16350.

This product will be used in an explosive atmosphere.

Five-finger protective gloves must:

have an anatomical thumb,

be made of fabric or polymer-coated knit in the whole palm

and dorsal,

provide a sure grip,

to be finished with a welter,

Designed for carrying wet, smooth and slippery objects.

Gloves must meet the requirements of PN-EN 388, PN-EN 420 + A1.

Protective gloves, tested according to the test methods described in the standard

EN 388, must correspond to the performance levels of at least 4.2.2.2.

The antistatic properties of gloves must be tested in accordance with the test methods described in PN-EN 16350.

Gloves are designed to protect the hands of the welder against burns of hot metal splinters when welding electric and gas on the surface of the mine.

Five-finger safety gloves type A, with anatomical thumb

Gloves must meet the requirements of EN 12477 + A1 or PN-EN 420

The protective gloves have been tested according to the test methods described in the standard:

EN-388 must correspond to performance levels of at least 3 1 3 3,

EN 407 shall correspond to the performance levels of at least 4 1 3 X 3 X.

The product will be used in an explosive atmosphere.

Five-finger safety gloves must:

have an anatomical thumb,

be made of denim and leather,

in the palm part made of one piece of leather (except the shaved fingers 2 and 3), without stitching,

be reinforced with the same skin on the dorsal side, on the line of the metacarpal and on the toes of the fingers,

be on the lining at least in the palm part,

have a cuff of a single layer of denim,

Gloves should meet the requirements of EN 388 and EN 420 + A1.

4

Protective gloves, tested according to the test methods described in the standard

EN-388, must meet at least 4 2 2 2 performance levels.

The antistatic properties of gloves must be tested in accordance with the test methods described in PN-EN 16350.

Anti-cutting gloves are designed to protect hands from injury during work

The product will be used in an explosive atmosphere.

Protective gloves, five-inch, with anatomical thumb, should be made

With high-grade technical fibers, anti-cutting, will provide

Oppex helps organizations with a professional approach to public sector sales, to either grow their business locally or find new opportunities abroad. We are the largest source of public procurement data in Europe. We process and translate public tenders from over 1.000 local, national and international procurement portals and have acquired over 8 million tenders in our database.


Trusted By

KONE
NHS
3M
ABB