Public tenders for medical in Fox-farm-college United States

Find all Medical tenders in the world.
Finding business opportunities has never been easier.

Results for medical. Make a new search!
MedicalUnited Statesfox-farm-college

Q--Pathology Laboratory Services Cheyenne, WY VA Medical Center

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published February 4, 2016  -  Deadline March 11, 2016
cpvs

SYNOPSIS DESCRIPTION: The Department of Veterans Affairs, Network Contracting Office (NCO) 19 Rocky Mountain Acquisition Center, 4100 East Mississippi Avenue, Suite 900, Glendale, CO 80246 intends to solicit sources to enter into one or more firm-fixed price indefinite delivery, indefinite quantity contracts to provide Pathology Laboratory Services for the VA Cheyenne Health Care System. The contractor(s) shall provide all management, personnel, security clearance, space and equipment necessary to perform pathology services as stated herein. Services shall be performed at either the contractor's place of business, or on the premises of the Cheyenne VA Medical Center in Cheyenne Wyoming. The services will include but not limited to; All routine anatomic pathology specimens from the VA shall be placed in a designated location at the VA Medical Center for pick up by Contractor personnel at regularly scheduled times. All specimens must be accompanied by an appropriately completed surgical pathology requisition. Routine surgical pathology and cytology reports shall be available within two days after pick up from the VA and final autopsy reports shall be available within thirty (30) days, except in cases requiring special procedures. Frozen sections performed on specimens obtained at the VA Medical Center shall be performed at the VA Medical Center facility. The solicitation package will be available for download on or about February 8, 2016, and proposals shall be 30 days after the issuance of the solicitation, and no later than 4:00 p.m. mountain time. The applicable NAICS code is 621511 with a small business size standard of $32.5 Million. This solicitation is a 100% Small Business Set Aside. The solicitation reference is VA-259-15-R-0509 - Pathology Laboratory Services - VA Cheyenne Health Care System and should be referenced in all correspondence/inquiries. The location for service to be provided is as follows: VA Cheyenne Health Care System, 2360 E. Pershing Blvd, Cheyenne, Wyoming 82001. All information for this solicitation will be posted on the Federal Business Opportunities (FBO) website at www.fbo.gov. No hard copies of the solicitation will be provided. Any amendments to this solicitation will be available at this website and offerors are advised that they are responsible for obtaining amendments to this solicitation at this website prior to the time of responding to the solicitation. Any questions pertaining to the solicitation must be provided to the contract specialist, in writing within 7 days of the posting of the solicitation, at either Ronnie.Jones@va.gov or the physical address listed herein to be considered for a response. This is the pre-solicitation notice only. Please do not send questions until after the solicitation is posted on or about February 8, 2016.

65--Medical Exam Tables and Stools

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published November 14, 2017  -  Deadline November 20, 2017
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-89 issued and effective July 14, 2016. This solicitation 36C25918Q0040 is issued as a request for quote (RFQ). The North American Industry Classification System Code (NAICS) for this procurement is 339112 (Surgical Appliance and Supplies Manufacturing). This RFQ is being issued as a Veteran Owned Small Business set-aside under NAICS Code 337112. SBA Small Business Size Standard is 1000. Any Award Made as a Result of this Solicitation will be made on an All or Nothing Basis. All Items being Solicited (Products and/or Receivables as appropriate) must be of New Manufacture; No Remanufactured or "Grey Market" items allowed. Grey market items are Original Equipment Manufacturers (OEM) goods sold through unauthorized channels in direct competition with authorized distributors. This procurement is for new OEM equipment only for a VA Medical Center.  No remanufactures or grey market items will be acceptable. Vendor shall be an OEM, authorized dealer, authorized distributor or authorized reseller for the proposed equipment/system, verified by an authorization letter or other documents from the OEM, such that the OEM s warranty and service are provided and maintained by the OEM.  All software licensing, warranty and service associated with the equipment/system shall be in accordance with the OEM terms and conditions. FAR 52.212-4 applies to all Solicitations and Awards. Department of Veterans Affairs, VISN 19, VA Medical Center, 2360 East Pershing Blvd., Cheyenne, WY 82001, is seeking a quote for the Brewer Company products listed below : ITEM INFORMATION ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 Plush Access High Low Exam Table / 38208 -charcoal 6.00 EA __________________ __________________ 0002 Plush Access High Low Exam Table / 38208 - admiral 4.00 EA __________________ __________________ 0003 Plush Access High Low Exam Table / 38208 - shetland 7.00 EA __________________ __________________ 0004 UL Century Pneumatic Exam Stool / 37821 - charcoal 6.00 EA __________________ __________________ 0005 UL Century Pneumatic Exam Stool / 37821 - admiral 4.00 EA __________________ __________________ 0006 UL Century Pneumatic Exam Stool / 37821 - shetland 7.00 EA __________________ __________________ 0007 Pneumatic Lab Stool - cabernet 4.00 EA __________________ __________________ 0008 Pneumatic Exam Stool with Foot Rings / 4302 - cabernet 2.00 EA __________________ __________________ GRAND TOTAL __________________ Commercial Items Terms and Conditions: The selected offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; 52.212-2, Evaluation Commercial Items, FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.204-7, 52.204-10, FOB Destination is in accordance with FAR 52.247-49. 52.204-13, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.223-18, 52.225-13, 52.232-33 and 52.247-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The following VAAR clauses are to be incorporated by reference: 852.203-70, Commercial Advertising; 852.232-72, Electronic Submission of Payment Requests; 852.246-71, Inspection; The full text of the referenced VAAR clauses may be accessed electronically at http://www.va.gov/oal/library/vaar/. SAM Requirement: This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Additionally, all Veteran Owned Businesses who respond to a solicitation on this project must be registered with the Department of Veterans Affairs Center for Veterans Enterprise VetBiz Registry located at http://vip.vetbiz.gov. In addition, the following information is required for your quote to be considered: -Estimated delivery time (ARO): -Complete company name and address: -Company Point of Contact: -Email -Phone Number: -DUNS Number: Submit quotation and all supporting documentation to loretta.schmidt@va.gov. Offers are to be provided no later than 5:00 pm (MST) 20 Nov 2017. Please feel free to contact me, if you have any questions, at loretta.schmidt@va.gov.

62--Cheyenne VA Medical Center LED Parking Lot Lighting PURCHASE ORDER 442-A50128

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published May 1, 2015  -  Deadline May 8, 2015
cpvs

COMBINED SYNOPSIS/SOLICITATION FOR Inovus Solar LED Parking Light Poles This is a combined synopsis/solicitation for commercial items (supplies) prepared in accordance with the format at FAR Subpart 12.6., as supplemented with additional information included in this notice, and is being conducted pursuant to FAR Part Subpart 12.6 and FAR Part 13. The Request for Quote (RFQ) number is VA259-15-Q-0376. The synopsis/solicitation constitutes a RFQ and incorporates provisions and clauses in effect through Federal Acquisition Circular No. 2005-78 and Department of Veteran Affairs Acquisition Regulation Circular 2008-02. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTES ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. The associated North American Industry Classification System (NAICS) code is 221114, which has a corresponding size standard of 250 employees. This is 100% set aside for small business. The Department of Veteran Affairs, Cheyenne VA Medical Center, has a requirement for fourteen (14) BRAND NAME "Or Equal" Inovus Solar LED Parking Light Poles. The poles shall adhere to the following specifications due to preexisting parking lot infrastructure: T6 spun aluminum pole, 15 ft. height, 10 inch diameter, round-not tapered, 14" bolt circle for direct mounting to existing foundations. Arm Specifications: Straight Arm, 18 inches, single, black Luminaire Specifications: LED Roadway Lighting SAT-24S, AC, 450mA, 36 W, T3 The award will be made to the lowest price technically acceptable (LPTA), responsible quote. To be technically acceptable the products quoted shall be BRAND NAME or EQUAL to CLIN 0001. Line Items: Item No. Description Quantity Unit CLIN 0001 BRAND NAME "Or EQUAL"- Inovus Solar LED Light Poles Specifications: T6 spun aluminum pole, 15 ft. height, 10 inch diameter, round-not tapered, 14" bolt circle for direct mounting to existing foundations. Arm Specifications: Straight Arm, 18 inches, single, black Luminaire Specifications: LED Roadway Lighting SAT-24S, AC, 450mA, 36 W, T3 Delivery To: CHEYENNE VA Medical Center 2360 East Pershing Blvd. Cheyenne, WY 82001 14 EA ADDITIONAL DOCUMENTS NEEDED w/ the Quote: If offering a product other than the Brand Name specified herein, the vendors are required to provide descriptive literature in sufficient detail to determine if the items quoted are technically acceptable in terms of Brand Name or Equal to the Inovus Solar LED Light Poles CLIN Description. Federal Acquisition Regulation (FAR) and Veteran Administration Acquisition Regulation (VAAR) provisions and clauses that are included in this solicitation are denoted by the applicable acronyms. IAW FAR 52.211-6, please provide the following if bidding an "or equal" product: A) Manufacturer's name B) Manufacturer's part number C) Description to include salient physical, functional, and or performance characteristics The following provisions apply to this acquisition: FAR 52-212-1 Instructions to Offerors - Commercial Items (Apr 2014) FAR 52.212-2 Evaluation - Commercial Items (Oct 2014) This provision is incorporated by reference, and paragraph (a) is modified to read as follows: (a) This is a competitive source selection in which the Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price, and other factors considered. The Government intends to make award to the lowest priced, technically acceptable offeror. The Government intends to award without discussions with respective offerors. The Government, however, reserves the right to conduct discussions if deemed in its best interest. The following listed are evaluation factors that shall be used in the evaluation process: 1. Price 2. Technical Capability: Technical Acceptability is achieved when the offeror provides proof that the products meet the minimum standards of the Items Description, the stated Delivery Date, and Quality). *All offerors shall submit technical description of the products being offered in sufficient detail in addition to the price proposal, to evaluate compliance with the requirements in this solicitation. (b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. The following Provisions & Clauses applies to this acquisition: FAR 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998): This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es): FAR: http://farsite.hill.af.mil/vffara.htm NOTE: After selecting the appropriate regulation above, at the TABLE OF CONTENTS page, conduct a search for the desired regulation reference, using your browser's FIND function. When located, click on the hyperlinked regulation reference to access the clause. FAR 52.252-2 Clauses Incorporated by Reference (Feb 1998): This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): FAR: http://farsite.hill.af.mil/vffara.htm NOTE: After selecting the appropriate regulation above, at the TABLE OF CONTENTS page, conduct a search for the desired regulation reference, using your browser's FIND function. When located, click on the hyperlinked regulation reference to access the clause. VAAR 852.252-70 Solicitation Provisions or Clauses Incorporated by Reference (Jan 2008): This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): VAAR: http://farsite.hill.af.mil/vfvara.HTM The following FAR Provisions and Clauses apply to this solicitation and are incorporated by reference: FAR 52.204-7 System for Award Management (Jul 2013), FAR 52.209-2 Prohibition on Contracting With Inverted Domestic Corporations--Representation (May 2011), FAR 52.211-6 Brand Name or Equal (Aug 1999), FAR 52.212-3 Offeror Representations and Certifications - Commercial Items (Nov 2013), FAR 52.212-4 Contract Terms and Conditions- Commercial Items (Dec 2014) FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items Only the following FAR clauses in paragraph (b) of FAR 52.212-5 are applicable: FAR 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards, FAR 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment, FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations, FAR 52.222-3 Convict Labor, FAR 52.222-19 Child Labor Cooperation with Authorities and Remedies, FAR 52.222-21 Prohibition of Segregated Facilities, FAR 52.222-26, Equal Opportunity, FAR 52.222-35 Equal Opportunity for Veterans, FAR 52.222-36, Equal Opportunity for Workers with Disabilities, FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving, FAR 52.225-13 Restrictions on Certain Foreign Purchases, FAR 52.232-33 Payment By Electronic Funds Transfer-System for Award Management FAR 52.222-22 Previous Contracts and Compliance Reports (Feb 1999), FAR 52.222-25 Affirmative Action Compliance (Apr 1984), FAR 52.225-18 Place of Manufacture (Sep 2006), FAR 52.225-25 Prohibition on Contracting with Entities Engaging in Sanctioned Activities Relating to Iran-Representation and Certification (Dec 2012), FAR 52.233-1 Disputes (July 2002), FAR 52.233-3 Protest after Award (Aug 1996), FAR 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004), FAR 52.243-1 Changes -- Fixed Price (Aug 1987), FAR 52.246-2 Inspection of Supplies -- Fixed-Price (Aug 1996) FAR 52.246-16 Responsibility for Supplies (Apr 1984), FAR 52.247-34 F.O.B. Destination (Nov 1991), FAR 52.253-1 Computer Generated Forms (Jan 1991) The following VAAR Provisions & Clauses cited are applicable to this solicitation & incorporated by reference: VAAR 852.203-70 Commercial Advertising (JAN 2008) - Full Text, VAAR 852.211-70 Service Data Manual (NOV 1984) - Full Text, VAAR 852.211-73 Brand Name or Equal (Jan 2008), VAAR 852.232-72 Electronic Submission of Payment (NOV 2012) - Full Text, VAAR 852.246-70 Guarantee (JAN 2008) - Full Text, VAAR 852.246-71 Inspection (JAN 2008) - Full Text, VAAR 852.273-70 Late Offers (Jan 2003) In order to comply with the debt collection improvement act of 1966, all contractors must be registered and have an active registration in the System for Award Management (SAM) to be considered for an award of a federal contract. This system combines data that was formerly contained in the Central Contractors Registration (CCR) and Online Representation and Certifications (ORCA). For information, review the SAM website at https://www.sam.gov. All responsible sources may submit a quotation which shall be considered by the agency. Quotes must be signed, dated and submitted by May 8, 2015, 7:00 am, Mountain Standard Time. Quotes must be electronically submitted via email to the following points of contact. Primary: Benjamin Bray-Benjamin.Bray@va.gov

Q--DENTAL LAB SERVICES-CHYENNE

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published September 8, 2015
cpvs

SYNOPSIS DESCRIPTION: The Department of Veterans Affairs, Network Contracting Office (NCO) 19 Rocky Mountain Acquisition Center, 4100 East Mississippi Avenue, Suite 900, Glendale, CO 80246 intends to solicit sources to enter into one or more firm-fixed price indefinite delivery, indefinite quantity contracts to provide Dental Laboratory Services for the VA Cheyenne Medical Center. The contractor shall provide The Contractor shall provide services for the following broad categories of dental services: Complete dentures - custom impression trays, bite rims, setup, and process; Partial dentures - custom impression trays, frameworks, setup, and process; Partial denture repair - acrylic resin, denture teeth; Partial denture repair - laser welding; Traditional occlusal guard; Complete Denture reline/rebase; Partial Denture reline/rebase; Precision attachments; and Fixed Prosthetics to include multi- unit bridges, single units, all porcelain, LAVA, Procera, Emax and all metal restorations. Services shall be for a one-year base period with four one-year pre-priced option periods for renewal. The solicitation package will be available for download on or about September 10, 2015, and proposals shall be 21 days after the issuance of the solicitation, and no later than 4:30 p.m. mountain time. The applicable NAICS code is 339116 with a small business size standard of 500 employees. This solicitation is a 100% Small Business Set Aside. The solicitation reference is VA-259-15-R-0532- Dental Laboratory Services -VA Cheyenne Medical Center and should be referenced in all correspondence/inquiries. The locations for service to be provided are as follows: VA Cheyenne Medical Center, 2360 E. Pershing Blvd, Cheyenne, WY. 82001. All information for this solicitation will be posted on the Federal Business Opportunities (FBO) website at www.fbo.gov. No hard copies of the solicitation will be provided. Any amendments to this solicitation will be available at this website and offerors are advised that they are responsible for obtaining amendments to this solicitation at this website prior to the time of responding to the solicitation.

Z--Relocate Greenhouse at Cheyenne VAMC

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published August 29, 2016  -  Deadline September 13, 2016
cpvs

The Cheyenne VA Medical Center in Cheyenne, WY intends to release Solicitation VA259-16-R-0496 for the relocation of the Greenhouse at Cheyenne VAMC . The Cheyenne VAMC requires construction services from a firm to provide all labor materials to disassemble and relocate an existing assembled greenhouse with all equipment from one location on the VA Hospital campus to another approximately 400 feet away, in accordance with statement of work and all applicable specifications and drawings. Project will be performed in accordance with all the contract terms, conditions, provisions and requirements. The full solicitation will be posted on FEDBIZOPPS www.fbo.gov on or shortly after August 29, 2016. The purpose of this requirement is to relocate the Greenhouse at Cheyenne VAMC, to include providing electrical service, natural gas and potable water service to the new site, placement of concrete pad for greenhouse structure reinstallation of existing swamp cooler and existing heater and ADA/ABA accessible sidewalk from greenhouse to parking area and installation of opposite ramp on median in parking area. This full solicitation will be 100% Service Disabled Veteran Owned Small Business set-aside competition. The North American Industry Classification System (NAICS) for this procurement is 236220, Commercial and Institutional Building construction, size standard $36,500,000.00. This requirement is for the Cheyenne VA Medical Center in Cheyenne, WY. Costs are firm fixed priced and scheduling has enough notification time to allow for the contractor to provide the service. All offerors must be registered in SAMS data base, see https://www.sam.gov and complete online Reps and Certs at http://www.sam.gov. Additionally, successful offeror must be a registered SDVOSB in VetBiz at http://www.vetbiz.gov . Amendments to the solicitation will be posted at this website only. All offerors must obtain amendments at this website; hard copies will not be mailed. All questions must be submitted in writing by email- robyn.young2@va.gov (preferred).

88--Goats for vegetation and fire mitigation

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published September 14, 2015  -  Deadline September 22, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is: VA259-15-Q-0645 and it is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-81 dated April 10, 2015 This solicitation is set-aside for Small Business. NAICS: 112420 and the Classification code is 88. The Department of Veterans Affairs Medical Center, VISN 19 Network Contracting Office (NCO 19), on behalf of the below location, plans to contract by means of small business set-aside, for the requirement of vegetation mitigation/management by way of goat grazing. This requirement is for the Cheyenne VA Medical Center and the government anticipates awarding a firm-fixed price, Base plus 4 year options contract. This RFQ closes on September 22, 2015 at 4:00 PM EST. Proposals must be received on or before the closing date and time of this RFQ. All responding vendors must be registered in WWW.SAM.GOV in order to receive an award. Questions regarding this RFQ shall be directed to: salim.williams@va.gov. The provision at 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The provision at 52.212-2, Evaluation - Commercial Items, applies to this acquisition. Offerors are advised to include a completed copy of the provision at 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL ITEMS (OCT 2014), with the offer. Description: Cheyenne VA Medical Center, 2360 E. Pershing Blvd, Cheyenne, WY 82001-5356 The Cheyenne VAMC has a requirement for vegetation mitigation/management with the utilization of goats. (SEE ATTACHED SOW). Additional description is listed below. The requested items consist of: 1. Grazing goats for weed and vegetation management and fire mitigation. Delivery Schedule: Delivery is to be "Upon Request" VISN 19 Locations: (442) Cheyenne VA Medical Center, 2360 E. Pershing Blvd, Cheyenne, WY 82001-5356 Request for Quote (RFQ), prospective contractor quotes, and product brochures, and all other required documentation shall be submitted by the closing date and time stated. All information is to be submitted at no cost or obligation to the Government. The information submitted will be reviewed by the Government technical representatives for considering future requirements. Responses to this notice should include the following: name and address of company, Dun & Bradstreet number, business size, and any other pertinent information that demonstrates the firm's ability to meet the above requirement. Submit capability packages no later than September 22, 2015, 4:00 PM, EST by email to: salim.williams@va.gov The following clauses & provisions apply to this acquisition: ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (DEC 2014) 52.217-9, OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) 52.232-19, AVAILABILITY OF FUNDS FOR THE NEXT FISCAL YEAR (APR 1984). 52.237-2, PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION (APR 1984). 852.203-70 Commercial Advertising (JAN 2008) 852.215-70, SERVICE-DISABLED VETERAN-OWNED AND VETERAN-OWNED SMALL BUSINESS EVALUATION FACTORS (DEC 2009) 852.215-71, EVALUATION FACTOR COMMITMENTS (DEC 2009) 852.232-72, ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV 2012) 852.237-70, CONTRACTOR RESPONSIBILITIES (APR 1984) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/ 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999) 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (DEC 2013) 52.233-1 DISPUTES (MAY 2014) 52.237-3 CONTINUITY OF SERVICES (JAN 1991) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (OCT 2014) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010)(41 U.S.C. 3509). 52.204-10, Reporting Executive Compensation & First-Tier Subcontract Awards; 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (AUG 2013) (31 U.S.C. 6101 note). 52.219-6, Notice of Total Small Business Set-Aside (JUNE 2003) (15 U.S.C. 644). 52.219-28, Post Award Small Business Program Representation (JUL 2013) (15U.S.C. 632(a)(2)). 52.222-3, Convict Labor (JUNE 2003); 52.222-21, Prohibition of Segregated Facilities (FEB 1999); 52.222-26, Equal Opportunity (MAR 2007); 52.222-36, Affirmative Action for Workers with Disabilities (JUL 2014); 52.222-50, Combating Trafficking in Persons (MAR 2015) (22U.S.C. chapter 78 and E.O. 13627). 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011); 52.225-13, Restrictions on Certain Foreign Purchases (JUNE 2008); 52.232-34, Payment by Electronic Funds Transfer - Other than System for Award Management (JUL 2013) (31 U.S.C. 3332). 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67). 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2014) (Executive Order 13658). (End of clause 52.212-5)

65--Cheyenne Hill-Rom AccuMax Surfaces

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published November 9, 2015  -  Deadline November 13, 2015
cpvs

This is a Combined Solicitation. RFQ VA259-16-Q-0071 is issued for a Hill-Rom ACCUMAX SURFACE Mattress Part #: PAH005010180-1for the Veterans Affairs in Cheyenne, Wyoming, which is located within VA Health Care Network (VISN 19). Contract solicitation period is 11/09/14 and closes 11/13/2014 at 1400hr EST. This is a service disabled small business set-aside acquisition and the solicitation is be issued using the Request for Quotation (RFQ) process. The proposals shall be emailed to david.rupert@va.gov with the subject line: VA259-16-Q-0071. No calls will be accepted. The NAICS code for this requirement is 339112, Surgical and Medical Instrument Manufacturing, and the Small Business Size Standard is 500 employees. Registration at http://www.SAM.gov (SAM) is required in order to be eligible for award of Government contracts. Email to david.rupert@va.gov with the subject line: VA259-16-Q-0071 by 11/13/2014, 1400 hrs. EST. Description: The following Hospital Bed Mattresses Upgrade. Brand Name or Equal. These items are all manufactured by Hill-Rom Company, Inc. Quantity is 40 Each. ACCUMAX SURFACE Mattress Part #: PAH001010080-1 AccuMax VPC AD (Careassist) Topper - Dual IFD Foam Box -0 Top Cover - Dartex Bottom Cover - Dresden Blue Fire Code Option - Flametex 1 Label - Standard Silkscreen Finish - No Handles/No Linen Locks Dimensions - 35" x 80" No Airport Dartex Ticking No Control Unit

63--Public Address Mass Notification System (PAMNS)

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published November 14, 2014  -  Deadline December 15, 2014
cpvs

This is a Pre-Solicitation Notice-Request for Quotations will be posted on or about November 13, 2014 Public Address Mass Notification System (PAMNS), projected at the Cheyenne Veterans Affairs Medical Center (VAMC) 2360 East Pershing Blvd., Cheyenne, Wyoming 82001. This will be a Service Disabled Veteran Owned Business (SDVOSB) Set-aside. A Cheyenne Veterans Affairs Medical Center (VAMC) is seeking a firm to provide the manpower, labor skills and supervision to provide for the purchasing of equipment and supplies and then installing and testing that equipment to replace and expand the Public Address Mass Notification System (PAMNS), to include Nurse Call, Code Blue voice and predefined frequently used messaging at the Cheyenne Veterans Affairs Medical Center (VAMC). This is a functioning hospital and the current PAMNS and pager systems must stay in place and functioning while the upgrading installation of the new system is being performed. The NIACS code for this project is 811213, with a small business size standard of $11M. This project will be 100% set-aside for Veteran-Owned Small Businesses as stated below. The POC for this project will be Donna Davis. She can be contacted at 303-372-7017 or email at Donna.davis11@va.gov. Important Notice: Apparent successful offerors must apply for and receive verification from the Department of Veteran Affairs Center for Verification and Evaluation (CVE) in accordance with 38 CFR Part 74 and VAAR 819.70 by submission of documentation of Veteran status, ownership and control sufficient to establish appropriate status, offerors must be both VISIBLE and VERIFIED by the Department of Veteran Affairs Center for Verification and Evaluation(CVE) at the time of submission of proposal. Failure to be both VERIFIED by CVE and VISIBLE on VetBiz at the time of proposal submission will result in the offeror's proposal being deemed non-responsive. All offerors are urged to contact the CVE and submit the aforementioned required documents to obtain CVE verification of their SDVOSB status if they have not already done so. VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009) (a) Definition. For the Department of Veterans Affairs, "Service-disabled veteran-owned small business concern": (1) Means a small business concern: (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans (or eligible surviving spouses); (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans (or eligible surviving spouses) or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and (iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov). (2) "Service-disabled veteran" means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (b) General. (1) Offers are solicited only from service-disabled veteran-owned small business concerns. Offers received from concerns that are not service-disabled veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a service-disabled veteran-owned small business concern. (c) Agreement. A service-disabled veteran owned small business concern agrees that in the performance of the contract, in the case of a contract for: (1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible service-disabled veteran-owned small business concerns; (2) Supplies (other than acquisition from a non-manufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible service-disabled veteran-owned small business concerns; (3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns; or (4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns. (d) A joint venture may be considered a service-disabled veteran owned small business concern if- (1) At least one member of the joint venture is a service-disabled veteran-owned small business concern, and makes the following representations: That it is a service-disabled veteran-owned small business concern, and that it is a small business concern under the North American Industry Classification Systems (NAICS) code assigned to the procurement; (2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement; and (3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation. (4) The joint venture meets the requirements of 13 CFR 125.15(b). (e) Any service-disabled veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program.

46--Cheyenne VA Reverse Osmosis System

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published September 6, 2016  -  Deadline September 14, 2016
cpvs

This is a COMBINED SYNOPSIS/SOLICITATION in support of the CHEYENNE VA MEDICAL CENTER in CHEYENNE, WYOMING, for the items and services described below. All responses due by SEPTEMBER 14, 2016, at 1400 est. This is a Small Business Set-Aside on the North American Industry Classification System (NAICS) code is 333318 - Other Commercial and Service Industry Machinery Manufacturing. The largest a firm can be and still qualify as a small business for Federal Government programs is no larger than 1000 employees. DESCRIPTION OF THE REQUIREMENT: AmeriWater R03 with 185 gallon tank AmeriWater's complete water treatment systems for central sterile processing provide high quality low conductivity water for washers, Water Treatment System for Central Sterile Processing disinfectors, glassware washers, steam boilers and final rinses used in hospitals. They are designed to use a minimum of valuable floor space while providing high quality water. Field proven in medical facilities across North America, AmeriWater's water treatment systems are designed to minimize maintenance and deliver greater energy efficiency while providing cleaner water for cleaning, disinfecting, and sterilization. oPrefiltration for sediment removal oReverse osmosis unit purifies your water oAnti-scalant feed reduces hard water scale on RO oController with conductivity feed and product water oSimple disinfection cycle oStorage tank with sealed lid and distribution pump ensures continuous pure water for your systems oOptional deionizer polisher includes a 200,000 ohm-cm monitor and alarm oLow feed pressure system shutdown / alarm oHigh conductivity alarm oStorage tank empty pump shutdown One each (EA) of the below, see solicitation. Part Number Description AW00HCS2055 AmeriWater R03 with 185 gallon tank [Adding the blend valve (partAW00HCS5001) increases RO product output] Reverse Osmosis System and deionizer polisher with all pretreatment on board in an ABS cabinet and a 185 gallon storage tank with demand pump package that provides up to 30 GPM, and up to 4200 GPD. Deionizer polisher utilizes exchange mixed bed resin packs. Features: pre-carbon block filter, anti-scalant feed to prevent hard water scale on reverse osmosis, controller with conductivity of feed and product water, simple disinfection cycle, low feed pressure shut down, storage tank with sealed, vented lid and pump package, deionizer polisher with a 200,000 ohm-cm monitor with alarm. Ships with four cartridges, four resin packs, four gallons of anti-scalant and one bypass hose kit. o SPD Accessories o AmeriWater AW00HCS5001 Water blend valve for AmeriWater Systems Requires plumbing installation prior to unit arriving This water blend valve is used in conjunction with the AmweriWater Reverse Osmosis systems to maintain the incoming water temperate at 77F, which increases the RO product output. o SPD Accessories o AmeriWater SE600492 Installation of Treated Water System. installation includes all necessary labor and materials required to uncrate, set-in-place and assemble equipment. Price is for normal working hours, Monday - Friday 8 am -5 pm unless otherwise noted. Includes with its Installation Services an operational check-out test, any necessary adjustments and a demonstration of the equipment for appropriate facility personnel.

65--SYS 7 HIGH SPEED PRECISION SAW

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published September 9, 2016  -  Deadline September 15, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-89 issued and effective July 14, 2016. This solicitation VA259-16-Q-0382 is issued as a request for quote (RFQ). The North American Industry Classification System Code (NAICS) for this procurement is 339112 (Surgical & Medical Instrument Manufacturing). This RFQ is being issued as a Service Disabled Veteran Owned Small Business set-aside under NAICS Code 339112, SBA Small Business Size Standard of 1,000 employees. Any Award Made as a Result of this Solicitation will be made on an All or Nothing Basis. All Items being Solicited (Products and/or Receivables as appropriate) must be of New Manufacture; No Remanufactured or "Grey Market" items allowed. FAR 52.212-4 applies to all Solicitations and Awards. Department of Veterans Affairs, VISN 19, VA Medical Center, 2360 East Pershing Blvd., Cheyenne, WY 82001-5356, is seeking a quote for the items listed below or an equal product, in accordance with the Stryker System 7 High Speed Precision Saw Requirements. Solicitation and evaluation of offers are to be in accordance with (IAW) VAAR 852.211-73 and Far 52.211-6, Brand Name or Equal. Please note there needs to be reference to a trade-in and installation/training. Item No. Part No. Description U/M Qty Unit Price Total 1 7209-009-000 Sys 7 High Speed Precision Saw EA 2 2 7205-000-000 System 7 Dual Trigger Rotary EA 2 3 7208-000-000 System 7 Sag Saw EA 2 4 7206-000-000 System 7 Recip Saw EA 2 5 6203-113-000 Hudson Attachment EA 2 6 6203-135-000 Hudson/Modified Trinkle Attach EA 2 7 6203-131-000 ¼" Chuck w/key EA 2 8 6203-110-000 AO Small Attachment EA 2 9 7203-126-000 PIN Collet EA 2 10 7203-026-000 Wire Collet EA 2 11 7102-550-000 S7 4HP Insert Tray/Container EA 2 12 7215-000-000 Smartlife Large Battery EA 2 TOTAL Commercial Items Terms and Conditions: The selected offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; 52.212-2, Evaluation Commercial Items, FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.204-7, 52.204-10, FOB Destination is in accordance with FAR 52.247-49. 52.204-13, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.223-18, 52.225-13, 52.232-34 and 52.247-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The following VAAR clauses are to be incorporated by reference: 852.203-70, Commercial Advertising; 852.232-72, Electronic Submission of Payment Requests; 852.246-71, Inspection; The full text of the referenced VAAR clauses may be accessed electronically at http://www.va.gov/oal/library/vaar/. SAM Requirement: This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Additionally, all Service Disabled Veteran Owned Businesses or Veteran Owned Businesses who respond to a solicitation on this project must be registered with the Department of Veterans Affairs Center for Veterans Enterprise VetBiz Registry located at http://vip.vetbiz.gov. In addition, the following information is required for your quote to be considered: -Estimated delivery time (ARO): -Complete company name and address: -Company Point of Contact: -Email -Phone Number: -DUNS Number: Submit quotation and all supporting documentation to loretta.schmidt@va.gov. Offers are to be provided no later than 4:00 pm (MST) 15 September 2016. Please feel free to contact me, if you have any questions, at loretta.schmidt@va.gov.

58--442 - MOTOROLA HAND HELD RADIOS

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published June 22, 2016  -  Deadline June 27, 2016
cpvs

Department of Veterans Affairs, VISN 19, VA Medical Center Cheyenne is seeking to procure Motorola Digital Portable radios and accessories. This solicitation VA259-16-Q-0336 is issued as a request for quote (RFQ). The North American Industry Classification System Code (NAICS) for this procurement is 334220 (Mobile communications equipment manufacturing) using a SBA designated Small Business Size Standard of 1250 employees. This RFQ is being issued as a small business set-aside under NAICS Code 334220. Respondents to this solicitation must fully demonstrate their capability by supplying detailed quote information for the below requirements. Solicitation and evaluation of offers are to be IAW FAR 52.211-6: Brand Name only. Minimum desired specifications of the requested item(s) are to be equal to or better. Department of Veterans Affairs, VISN 19, VA Medical Center Cheyenne is seeking a quote for the item listed below: ITEM NO. DESCRIPTION QUANTITY UNIT XPR3500 CAP+ 1 Motorola XPR3500 Digital Trunking Capable 84 EA 136-174M,128CH, Display, LKP Basic CAP+ Upgrade 2 Capacity Plus Upgrade for XPR8400 2 EA 136-174, 25W, GPS ND Analog P25 Connect 3 P25 Connect Bridge 1 EA XPR4350 VHF 4 Motorola XPR 4350 25W Mobile Radio 1 EA XPR3000 Battery 5 Motorola XPR3000 Series Battery,Spare 58 EA Impress Slim Li-ion (1500mAh) XPR MUC 6 XPR Series Multi Unit Charger 6 EA IMPRES Multi Unit Charger (No Display) LABOR 7 Installation, Programming, Testing 1 LT and Alignment(1) (1)Programming must include a price for Wyolink, a statewide digital trunked VHF P-25 compliant public safety communications system designed to coordinate and integrate communications between state, local, and federal public safety agencies. See link http://wyolink.state.wy.us/ This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-88 issued and effective 6/15/2016. Commercial Items Terms and Conditions: The selected offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; 52.212-2, Evaluation Commercial Items, FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.204-7, 52.204-10, 52.204-13, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.223-18, 52.225-13, 52.232-34 and 52.247-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The following VAAR clauses are to be incorporated by reference: 852.203-70, Commercial Advertising; 852.232-72, Electronic Submission of Payment Requests; 852.246-71, Inspection; The full text of the referenced VAAR clauses may be accessed electronically at http://www.va.gov/oal/library/vaar/. SAM Requirement: This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Additionally, all Service Disabled Veteran Owned Businesses or Veteran Owned Businesses who respond to a solicitation on this project must be registered with the Department of Veterans Affairs Center for Veterans Enterprise VetBiz Registry located at http://vip.vetbiz.gov. Equipment Condition: Any Award Made as a Result of this Solicitation will be made on an All or Nothing Basis. All Items being solicited (Products and/or Receivables as appropriate) must be of New Manufacture; New Equipment ONLY. NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Salient Characteristics: " Busy channel lockout " Call tones " Channel scan " Channel spacing 6.25, 12.5, 25 " Missed call alerts " Group call " Scan types Normal, Priority, Dual priority, Nuisance channel delete, Talk group, All group, System, Home revert " Time out timer " Programmable buttons " Signaling MDC (Encode/Decode), Quick-Call II (Encode/Decode) " Lone worker " Private line " Transmit interrupt " Call forward " Caller ID " Number of channels XPR 3500 - 128 " One to one calling " Phone book " Talk-around " Voice operated transmit (VOX) " Intelligent audio " Voice announcement " Monitor Permanent (Sticky) Monitor " Digital private line " CPS (Customer Programming Software) " WyoLink Programming Responding companies shall include any relevant information (specifications, cut sheets, brochures, capability statement, etc.) confirming their ability to supply the salient characteristics outlined in this request. In addition to providing all documents necessary to validate the above requirements can be met (or exceeded), interested vendors shall include with their response: " Complete company name and address: " DUNS Number: " CAGE Code: " Applicable NAICS Code: " Company Point of Contact (PCO) o Name: o Email Address: o Phone Number: " Delivery lead-time: " Place of Manufacture: Please contact me at david.rohrig@va.gov if you have any questions.

Z--Automate Boiler Plant Chemical Feed

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published October 29, 2015  -  Deadline December 16, 2015
cpvs

THIS IS A PRESOLICIATION NOTICE - A REQUEST FOR PROPOSAL WILL BE POSTED ON OR ABOUT NOVEMBER 16, 2015 Automate Boiler Plant Chemical Feed, Cheyenne, Wyoming VA259-16-R-0031 The Cheyenne Veterans Affairs Medical Center (VAMC) in Cheyenne, Wyoming has a requirement to automate the boiler plant chemical feed. Contractor shall purchase and install an Automated Chemical Treatment System for the boiler feed water. This equipment shall both monitor and control the chemical feeds to the boiler feed water as well as monitor and control the dissolved solids (by opening blowdown valves provided and installed by the contractor). The boiler plant currently has three (3) Cleaver-Brooks Boilers and one de-aerator. Two (2) of the boilers are 250 Hp and one is 100 Hp. All work will be accomplished on the Cheyenne VA Medical Center campus as indicated in the specifications, drawings and statement of work under project number 442-16-04S. The NAICS code for this procurement is 238220 with a small business size standard of $15M. The magnitude of this project is between $100,000 and $250,000. This project will be 100% set-aside for Service-Disabled Veteran-Owned Small Businesses, as stated below. The POC for this project will be Jason Thomas, Contracting Officer. He can be contacted at 303-372-7088 or email at jason.thomas@va.gov. Important Notice: Apparent successful offerors must apply for and receive verification from the Department of Veterans Affairs Center for Verification and Evaluation (CVE) in accordance with 38 CFR Part 74 and VAAR 819.70 by submission of documentation of Veteran status, ownership and control sufficient to establish appropriate status, offerors must be both VISIBLE and VERIFIED by the Department of Veterans Affairs CVE prior to contract award. Failure to be both VERIFIED by CVE and VISIBLE on VetBiz prior to contract award will result in the offeror's proposal being deemed non-responsive. All offerors are urged to contact the CVE and submit the aforementioned required documents to obtain CVE verification of their SDVOSB status if they have not already done so. 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009) (a) Definition. For the Department of Veterans Affairs, "Service-disabled veteran-owned small business concern": (1) Means a small business concern: (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans (or eligible surviving spouses); (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans (or eligible surviving spouses) or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and (iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov). (2) "Service-disabled veteran" means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (b) General. (1) Offers are solicited only from service-disabled veteran-owned small business concerns. Offers received from concerns that are not service-disabled veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a service-disabled veteran-owned small business concern. (c) Agreement. A service-disabled veteran owned small business concern agrees that in the performance of the contract, in the case of a contract for: (1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible service-disabled veteran-owned small business concerns; (2) Supplies (other than acquisition from a non-manufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible service-disabled veteran-owned small business concerns; (3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns; or (4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns. (d) A joint venture may be considered a service-disabled veteran owned small business concern if- (1) At least one member of the joint venture is a service-disabled veteran-owned small business concern, and makes the following representations: That it is a service-disabled veteran-owned small business concern, and that it is a small business concern under the North American Industry Classification Systems (NAICS) code assigned to the procurement; (2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement; and (3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation. (4) The joint venture meets the requirements of 13 CFR 125.15(b). (e) Any service-disabled veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program.

Z--Energy Audit Corrections - Air Handling Units

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published August 10, 2015  -  Deadline September 24, 2015
cpvs

THIS IS A PRESOLICIATION NOTICE - A REQUEST FOR PROPOSAL WILL BE POSTED ON OR ABOUT AUGUST 25, 2015 Energy Audit Corrections - Air Handling Units VA259-15-R-0565 The Cheyenne Veteran Affairs Medical Center (VAMC) in Cheyenne, Wyoming has a requirement to thoroughly inspect, clean and provide minor repairs to twelve (12) Air Handling Units (AHUs). The work will include, but is not limited to, repair partial or full upgrade of pneumatic controls to Direct Digital Controls (DDC); electric drive motor replacement; full air and water Test And Balance (TAB) of the AHUs; repair or replace door seals, temperature sensors, control valves, actuators and other devices; remove AHU internal insulation and replace with external insulation; and clean all interior surfaces, dampers and coils of AHUs. All work will be accomplished on the Cheyenne VA Medical Center campus as indicated in the plans, specifications, and drawings under project number 442-15-310. The NAICS code for this procurement is 238220 with a small business size standard of $15M. The magnitude of this project is between $500,000 and $1,000,000. This project will be 100% set-aside for Service-Disabled Veteran-Owned Small Businesses, as stated below. The POC for this project will be Jason Thomas. He can be contacted at 303-372-7088 or email at jason.thomas@va.gov. Important Notice: Apparent successful offerors must apply for and receive verification from the Department of Veterans Affairs Center for Verification and Evaluation (CVE) in accordance with 38 CFR Part 74 and VAAR 819.70 by submission of documentation of Veteran status, ownership and control sufficient to establish appropriate status, offerors must be both VISIBLE and VERIFIED by the Department of Veteran Affairs Center for Veterans Enterprises prior to contract award. Failure to be both VERIFIED by CVE and VISIBLE on VetBiz prior to contract award will result in the offeror's proposal being deemed non-responsive. All offerors are urged to contact the CVE and submit the aforementioned required documents to obtain CVE verification of their SDVOSB status if they have not already done so. 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009) (a) Definition. For the Department of Veterans Affairs, "Service-disabled veteran-owned small business concern": (1) Means a small business concern: (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans (or eligible surviving spouses); (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans (or eligible surviving spouses) or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and (iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov). (2) "Service-disabled veteran" means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (b) General. (1) Offers are solicited only from service-disabled veteran-owned small business concerns. Offers received from concerns that are not service-disabled veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a service-disabled veteran-owned small business concern. (c) Agreement. A service-disabled veteran owned small business concern agrees that in the performance of the contract, in the case of a contract for: (1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible service-disabled veteran-owned small business concerns; (2) Supplies (other than acquisition from a non-manufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible service-disabled veteran-owned small business concerns; (3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns; or (4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns. (d) A joint venture may be considered a service-disabled veteran owned small business concern if- (1) At least one member of the joint venture is a service-disabled veteran-owned small business concern, and makes the following representations: That it is a service-disabled veteran-owned small business concern, and that it is a small business concern under the North American Industry Classification Systems (NAICS) code assigned to the procurement; (2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement; and (3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation. (4) The joint venture meets the requirements of 13 CFR 125.15(b). (e) Any service-disabled veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program.

C--Potable Water Improvements

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published December 1, 2015  -  Deadline December 22, 2015
cpvs

DESCRIPTION: This is a Pre-Solicitation Notice for the establishment of an Architect-Engineering (A-E) contract with services to be performed at the VA Medical Center Cheyenne VAMC 2360 East Pershing Blvd, WY 82001. This requirement is being set-aside to Small Disabled Veteran Owned Small Business (SDVOSB) firms. THIS ANNOUNCEMENT IS NOT A REQUEST FOR PROPOSAL; NO SOLICITATION PACKAGE WILL BE ISSUED UNTIL AFTER AN EVALUATION HAS BEEN MADE ON THE PROVIDED SF-330s. The SF-330 can be downloaded through the GSA Forms Library at: http://www.gsa.gov/portal/forms/type/TOP, scroll down to locate and click on the SF-330 hyperlink entitled, "Architect-Engineer Qualifications." Written questions pertaining to this requirement should be submitted no later than 12:00 PM. Mountain Standard Time (MST), December 08, 2015. Interested firms should submit their current SF-330, Parts I and II, to Josiah.Benton@va.gov. The SF-330s are due no later than 12:00 PM, MST, December 22, 2015. SCOPE OF WORK: This contract will provide for a design for correcting deficiencies to ensure patient safety and to comply with to VA Directives at the Sheridan VA Medical Center. The contractor shall design the following 1. Replace existing waterlines from connection to City of Cheyenne water main. Includes replacement of all water mains and service lines to all buildings located on the Cheyenne VA Medical Center Campus. This includes ensuring all waterlines are identified on plans.. a. This includes ensuring all waterlines are identified on plans. Existing water lines must be maintained during construction to the extent possible to keep the medical center fully function during the construction period. The design will include phasing plans to minimize water disruptions during the work week and to utilize evenings and weekends for water service disruption. b. Remove abandoned water mains upon installation of new water mains. c. Control Valves shall be designed into the project per industry standards and as necessary to provide runs of no more than 200 Lin. Ft. with all safety items such as backflow preventers, etc., and potential hose connections at same locations within vaults. All aspects of the design must adhere to the NEC Design manuals posted on the VA technical information library at the following sites: http://www.cfm.va.gov/til/dManual/dmMEhosp.pdf and http://www.cfm.va.gov/til/dManual/dmPlbg.pdf 2. Work includes, but is not limited to, Architectural, Mechanical and Electrical design services for the Replace Waterlines Project 3. The design must, as a minimum, be in accordance with all applicable codes indicated in the Department of Veterans Affairs (VA), Design Manuals and VA PUBLICATIONS (Master Construction Specifications, Construction Standards, etc.) and any other applicable codes. This project design is to adhere to all building codes and standards including Joint Commission Accreditation Standards, National Fire Protection Association (NFPA) Codes, VA Specifications and Standards, and American Institute of Architects (AIA) Standards unless otherwise approved in writing by VA. Design is to follow all information outlined in VA Technical Information Library located at http://www.cfm.va.gov/til/dGuide.asp unless otherwise approved in writing by VA. Please note: The VA is its own Authority Having Jurisdiction (AHJ) and is, therefore, not necessarily required to comply with the requirements of other AHJs with which the A/E firm may have worked, and VA Information Security Handbook 6500.6, etc.). DESIGN CRITERIA: As part of the design the following list needs to be considered: 1. All electrical work will be terminated by the contractor. The design must be clear who and what is supplied for the termination equipment. 2. Any penetrations through any fire barriers whether a floor or wall it will be done in this contract to meet VA standards and National Fire Protection Association (NFPA). 3. The installed system and its components shall be tested and commissioned. This will be included in the design and construction documents. 4. Implement new technologies in electrical systems to improve facilitate energy usage reductions. The system will be compatible with the existing control systems on station. 5. All finishes will be designed and called out in a finish schedule. 6. All testing and balancing parameters will be provided by the A-E. 7. Design documents that show the red lines will be submitted by the contractor to the A-E, put into the AutoCAD drawings and submitted within 30 days of the completion of the construction project. 8. All existing utilities which are designed to be relocated or modified shall have direction to the contractor on the new location and modifications. INVESTIGATIVE SERVICES: 1. A report on 8 1/2"x11" paper (bound) and an electric Portable Document Format (PDF) version will be submitted. It will provide pro and cons of the project. It shall include a preliminary cost estimate and any results from preliminary testing and investigations. The results and sketches from this report should be used to develop the design. 2. Interview and work with medical center staff to determine how the current system is working and what needs there are from the Facilities Management staff. 3. In person inspections are required before the start of design due to the need for phased designed in the specified areas. The A-E will need to understand the workings of the area to facilitate a smoother design. OFFERORS WILL BE EVALUATED ON THE FOLLOWING CRITERIA: The submitted SF-330s will be evaluated on the following criteria: This acquisition will be in accordance with FAR Part 36.602-1 and VAAR Part 836.601-1. The following evaluation criteria will be used to evaluate SF-330 technical proposals: The A/E must demonstrate its qualifications with respect to the published evaluation criteria for all services. Evaluation Criteria (1) through (4) are considered most important and equal among themselves; Criteria (5) and (6) are of slightly less importance than (1) through (4), but are equal value among themselves; Criteria (7) and (8) are the least important and listed in descending order of importance. Specific evaluation criteria include: 1. Specialized experience and technical competence in the type of work required, including, where appropriate, experience in energy conservation, pollution prevention, waste reduction, and the use of recovered materials. 2. Professional Qualifications necessary for satisfactory performance of required services. 3. Capacity to accomplish the work in the required time. 4. Past Performance on contracts with Government agencies and private industry in terms of cost control, quality of work and compliance with performance schedules. 5. Specific experience and qualifications of personnel proposed for assignment to the project and their record of working together as a team. 6. Location in the general geographical area of the project and knowledge of the locality of the project; provided, that application of this criterion leaves an appropriate number of qualified firms, given the nature and size of the project. 7. Reputation and standing of the firm and its principal officials with respect to professional performance, general management, and cooperativeness. 8. Record of significant claims against the firm because of improper or incomplete architectural and engineering services. Criterion 1 - Specialized experience and technical competence in the type of work required, including, where appropriate, experience in energy conservation, pollution prevention, waste reduction, and the use of recovered materials. Offerors will be evaluated on specialized experience and technical competence in the performance of services similar to those anticipated under this contract with regard to: ? Experience with multi-phased hospital design and construction programs; ? Experience with construction and renovation phasing in hospitals and other VA facilities; ? Experience in providing post construction award services (shop drawing review, as-built drawing and Quality Assurance Plan (QAP) preparation, construction inspection services, and Operating and Maintenance Manuals). Submission requirements: Provide up to five (5) projects completed or substantially completed within the past five (5) years that best illustrate specialized experience of the proposed team in the areas outlined above. Example projects shall note project's square footage. All projects provided in the SF-330 must be completed by the office/branch/regional office/individual team member actually proposed to manage and/or perform work under this contract. To enable verification, firms should include the DUNS number along with each firm name in the SF-330 Part 1, Section F Item 25 "Firms from Section C Involved in this Project," block (1). Include a contract number or project identification number in block 21. Include an e-mail address, and phone number for the point of contact in block 23(c). Include in the project description the contract period of performance, award contract value, current contract value, a summary of the work performed that demonstrates relevance to specialized experience as outlined above. If the contractor served as a subcontractor on a project, indicate the value of the work they provided towards the performance of the overall project. If a project was performed by a joint venture, and not all joint venture partners are on the team proposed for this contract, the offeror/team should specifically address the work performed by the joint venture partner offering/teaming on this contract. Likewise, if the offeror/team member worked as a subcontractor on a project, the description should clearly describe the work actually performed by the offeror/team member and the roles and responsibilities of each on the project, rather than the work performed on the project as a whole. If the project description does not clearly delineate the work performed by the entity/entities offering/teaming on this contract, the project could be eliminated from consideration. NOTE: If the Offeror is a joint venture, information should be submitted as a joint venture; however, if there is no information for the joint venture, information should be submitted for either joint venture partner, not to exceed a total of five (5) projects for this criterion. Projects shall be submitted on the SF-330. For submittal purposes, a task order on an IDIQ contract is considered a project, as is a stand-alone contract award. Do not list an IDIQ contract as an example of a completed project. Instead, list relevant completed task orders or stand-alone contract awards that fit within the definition above. Examples of project work submitted that do not conform to this requirement will not be evaluated. Failure to provide requested data, accessible points of contact, or valid phone numbers could result in a firm being rated lower. All information for Criterion 1 should be submitted in Part 1, Section F of the SF-330. The Government WILL NOT consider information submitted in addition to Part 1, Section F in evaluating Criterion 1. Criterion 2 - Professional Qualifications necessary for satisfactory performance of required services. Offerors will be evaluated in terms of the qualifications, competence and experience of the key personnel and technical team proposed to accomplish this work. Key personnel are individuals who will have major contract or project management responsibilities and/or will provide unusual or unique expertise. Provide a balanced licensed and or certified workforce in the following disciplines - Architecture, Interior Design, Civil, Structural, Mechanical, Electrical, Fire Protection Engineering and LEED/Green Globes. The A-E must include a registered engineer from the state of Wyoming. The government shall allow for an offeror demonstrating reciprocity through the National Council of Examiners for Engineering and Surveying (NCEES). Submission requirements: Provide resumes for all proposed key personnel. Resumes are limited to one page each and should cite project specific experience and indicate proposed role in this contract. Provide professional registration, certification, licensure and/or accreditation. Indicate participation of key personnel in example projects in the SF-330 Part 1 Section G. Criterion 3 - Capacity to accomplish the work in the required time. Firms/teams will be evaluated in terms of their ability to plan for and manage work under the contract and capacity to accomplish the work in the required time. Submission requirements: Describe the firm's ability to concurrently perform and manage multiple projects in different locations to meet aggressive schedules, multiple disciplines, and control costs and the firm's capacity to accomplish multiple projects simultaneously. Criterion 4 - Past Performance - Offerors will be evaluated on past performance with Government agencies and private industry in terms of work quality, compliance with schedules, cost control, and stakeholder/customer satisfaction. Evaluating past performance and experience will include information provided in Past Performance Questionnaires (PPQs) or CPARS/ACASS for Criterion 1 projects and may include other information provided by the firm, customer inquiries, Government databases, and other information available to the Government including contacts with points of contact in other criteria. Failure to provide requested data, accessible points of contact, or valid phone numbers could result in a firm being rated lower. NOTE: Past performance information for projects listed under Criterion 1. Submission requirements: SUBMIT A COMPLETED CPARS/ACASS EVALUATION FOR EACH PROJECT UNDER CRITERION 1. IF THERE IS NOT A COMPLETED CPARS/ACASS EVALUATION, the Past Performance Questionnaire (PPQ) (Attachment (A)) included in this notice is provided for the offeror or its team members to submit to the client for each project the offeror includes under Criterion 1. AN OFFEROR SHALL NOT SUBMIT A PPQ WHEN A COMPLETED CPARS/ACASS IS AVAILABLE. IF A CPARS/ACASS EVALUATION IS NOT AVAILABLE, ensure correct phone numbers and email addresses are provided for the client point of contact. Completed PPQs should be submitted with your SF-330. If the offeror is unable to obtain a completed PPQ from a client for a project(s) before the response date set forth in this notice, offerors should complete and submit with their responses the first page of the PPQ (Attachment), which will provide contract and client information for the respective project(s). Offerors may submit a PPQ previously submitted under a different Notice/RFP (legible copies are acceptable) as long as it is on the same form as posted with this Synopsis. Offerors should follow up with clients/references to ensure timely submittal of questionnaires. If requested by the client, questionnaires may be submitted directly to the Government's point of contact, Network Contracting Office 19, Attn: Josiah Benton via email at Josiah.Benton@va.gov prior to the response date. Offerors shall not incorporate by reference into their response PPQs or CPARS previously submitted in response to other A/E services procurements. However, this does not preclude the Government from utilizing previously submitted PPQ information in the past performance evaluation. Criterion 5 - Specific experience and qualifications of personnel proposed for assignment to the project and their record of working together as a team. Submission requirements: Offerors shall submit evidence of individuals experience and qualifications in their respective fields. Additionally, documentation must be provided to show these individuals have worked together as a team on previous projects and their role. (Completing Sections E, F, and G, on the SF-330 meets the documentation requirement). Furthermore, offerors shall describe the ability of the firm to manage, coordinate and work effectively with team members, both internal staff and consultants. Discuss the history of working relationships with team members, including joint venture partners where applicable. Criterion 6 - Location in the general geographical area (Sheridan, WY) and knowledge of the (Sheridan, WY); provided, that application of this criterion leaves an appropriate number of qualified firms, given the nature and size of the project. Provided that the application of this criterion leaves an appropriate number of qualified firms, given the nature and size of the contract, firms/teams will be evaluated on the locations of their office or offices that will be performing the work under this contract. Submission requirements: Indicate firms/teams location, including main offices, branch offices and any subconsultants' offices and demonstrate how this will be advantageous to the Government. Criterion 7 - Reputation and standing of the firm and its principal officials with respect to professional performance, general management, and cooperativeness. Submission requirements: Offerors shall provide documentation (awards, certificates, publications, commendations from within the community) as evidence of reputation and standing of its firm. Criterion 8 - Record of significant claims against the firm because of improper or incomplete architectural and engineering services. Offerors with substantiated claims against the firm as a result of improper architectural and engineering services provided in the last three (3) years. Submission requirements: Records and any other documentation of substantiated claims highlighting improper or incomplete architectural engineering services against the firm within the last three (3) years. The SF-330 shall contain a signed and dated statement by the president of the firm affirming that there are no records of significant claims because of improper or incomplete architectural and engineering services. SELECTION INTERVIEW: Interviews shall be scheduled with firms slated as the most highly qualified. Firms slated for interviews may be asked to explain or expand on information contained in the SF-330 submittal. Elaborate presentations are not desired. GENERAL INFORMATION: All design and work will conform to the current edition of the VA Master Specifications and VA Design Standards as published at the following site: www.cfm.va.gov; ASME, OSHA, IBC 2009, NFPA and NEC building codes and standards. Coordinate all work through the COR of Facilities Management Service. Contractor is responsible for all cleanups and refuse disposal throughout the construction period. The A-E firm will prepare drawings and specifications in sufficient detail such that qualified outside General Contracting companies can prepare accurate and timely proposals for the desired construction work. Microsoft Project scheduling and management software will be used by both the A-E and Contractors to allow for regular tracking of schedules and work by the VA Medical Center. Schedules with MS Project will be regularly sent to the COR upon project initiation and whenever significant changes occur in the schedule. The estimated construction range is between $500,000 and $1,000,000. The A-E will provide an initial estimate of cost to perform the above work and will design only those items that can be provided within the cost limitation. The Medical Center must remain operational throughout the construction period and a detailed sequence of work will be provided by the A-E to minimize impact of the construction. The A-E will provide documents at each submission as indicated in the statement of work. The NAICS code for this procurement will be 541310, Architectural Services. The current small business size standard for 541310 is $7.5 million. Requirement for Electronic Submission Unless paper offers are specifically authorized, all responses to this pre-solicitation notice must be submitted electronically as described below. The only acceptable paper form for this requirement is the receipt of past performance questionnaires. Failure to comply with this requirement may jeopardize the possibility of receiving an award for the contract due to non-compliance with the terms of the solicitation. You must submit your electronic offer, and any supplemental information (such as spreadsheets, backup data, technical information), using any of the electronic formats and media described below. In addition, contractors are notified of the award via an electronic Notice of Award e-mail. The award document will be attached to the Notice of Award e-mail. Acceptable Electronic Formats (Software) for Submission of Offers 1. Files readable using the current Microsoft* Office version Products: Word, Excel, PowerPoint, or Access. Spreadsheet documents must be sent in a format that includes all formulas, macro, and format information. Print or scan images of spreadsheets are not acceptable. Please see security note below for caution regarding use of macros. When submitting construction drawings contractors are required to submit one set in AutoCAD and one set in Adobe PDF. (Purpose: contracting can open the PDF version and engineering can open AutoCAD files) 2. Files in Adobe* PDF (Portable Document Format) Files: When scanning documents scanner resolution should be set to 200 dots per inch, or greater. 3. Other electronic format. If you wish to submit an offer using another format than those described in these instructions, e-mail the Contracting Officer who issued the solicitation. Please submit your request at least ten (10) calendar days before the scheduled closing date of the solicitation. Request a decision as to the format acceptability and make sure you receive approval of the alternate format before using it to send your offer. 1. Please note that we can no longer accept .zip files due to increasing security concerns. E-mail Submission Procedures: For simplicity in this guidance, all submissions in response to a solicitation will be referred to as offers. a. Subject Line: Include the solicitation number, name of company, and closing date of solicitation. Use only one of the terms Quotation, Offer, or Bid depending on the solicitation type. b. Size: Maximum size of the e-mail message shall not exceed five (5) megabytes. The SF330, in its entirety, shall not exceed one email of 5MB. The SF330 (not including past performance questionnaires) are limited to 30 pages. Only one email is permitted unless otherwise stated in this paragraph or in writing by the Contract Officer submitting the solicitation. The offer will be date and time stamped by the Microsoft Email system and will be the official record of receipt for the submission. Security Issues, Late Bids, Unreadable Offers 1. Late submission of offers are outlined at FAR Parts 52.212-1(f), 52.214-7, and 52.215-1(c)(3). Particular attention is warranted to the portion of the provision that relates to the timing of submission. 2. Please see FAR 15.207(c) for a description of the steps the Government shall take with regard to unreadable offers. 3. To avoid rejection of an offer, vendors must make every effort to ensure their electronic submission is virus-free. Submissions or portions thereof submitted and which the automatic system detects the presence of a virus or which are otherwise unreadable will be treated as "unreadable" pursuant to FAR Parts 14.406 and FAR 15.207(c ). 4. The virus scanning software used by our e-mail systems cannot always distinguish a macro from a virus. Therefore, sending a macro embedded in an e-mail message or an e-mail attachment may cause the e-mail offer to be quarantined. You may send both the spreadsheet and the spreadsheet saved in PDF format to ensure that your proposal is readable. 5. Password protecting your offer is not permitted. The Contracting Officer will file the offer electronically which will allow access only by designated individuals. Important Notice: Apparent successful offerors must apply for and receive verification from the Department of Veterans Affairs Center for Veterans Enterprise (CVE) in accordance with 38 CFR Part 74 and VAAR 819.70 by submission of documentation of Veteran status, ownership and control sufficient to establish appropriate status, offerors must be both VISIBLE and VERIFIED by the Department of Veteran Affairs Center for Veterans Enterprises at the time of submission of proposal. Failure to be both VERIFIED by CVE and VISIBLE on VetBiz at the time of proposal submission will result in the offeror's proposal being deemed non-compliant. All offerors are urged to contact the CVE and submit the aforementioned required documents to obtain CVE verification of their SDVOSB status if they have not already done so. 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009) (a) Definition. For the Department of Veterans Affairs, "Service-disabled veteran-owned small business concern": (1) Means a small business concern: (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans (or eligible surviving spouses); (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans (or eligible surviving spouses) or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and (iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov). (2) "Service-disabled veteran" means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (b) General. (1) Offers are solicited only from service-disabled veteran-owned small business concerns. Offers received from concerns that are not service-disabled veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a service-disabled veteran-owned small business concern. (c) Agreement. A service-disabled veteran owned small business concern agrees that in the performance of the contract, in the case of a contract for: (1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible service-disabled veteran-owned small business concerns; (2) Supplies (other than acquisition from a non-manufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible service-disabled veteran-owned small business concerns; (3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns; or (4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns. (d) A joint venture may be considered a service-disabled veteran owned small business concern if- (1) At least one member of the joint venture is a service-disabled veteran-owned small business concern, and makes the following representations: That it is a service-disabled veteran-owned small business concern, and that it is a small business concern under the North American Industry Classification Systems (NAICS) code assigned to the procurement; (2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement; and (3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation. (4) The joint venture meets the requirements of 13 CFR 125.15(b). (e) Any service-disabled veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program.

Z--Penthouse Switchgear Replacement

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published March 29, 2016  -  Deadline March 30, 2016
cpvs

THIS IS A PRESOLICIATION NOTICE - A REQUEST FOR PROPOSAL WILL BE POSTED ON OR ABOUT Apr 13, 2016 Penthouse Switchgear Replacement, Cheyenne, WY VA259-16-R-0199 The Cheyenne Veteran Affairs Medical Center (VAMC) in Wyoming has a requirement to for Removal of the motor control center NHP-1 and EHP-1 located in the penthouse of the clinical addition. Replacement of motor control centers with switchboards and motor starters or VFD's at each piece of equipment served by the switchboards. Work to include re-work of existing controls and fire alarm connections to existing equipment to maintain existing functionality. All work to be performed as required by drawings and specifications. The NAICS code for this procurement is 238210 with a small business size standard of $15M. The magnitude of this project is between $500,000 and $1,000,000. This project will be 100% set-aside for Service-Disabled Veteran-Owned Small Businesses, as stated below. The POC for this project will be Joseph Wingfield. He can be contacted at 303-372-7019 or email at joseph.wingfield@va.gov. Important Notice: Apparent successful offerors must apply for and receive verification from the Department of Veterans Affairs Center for Verification and Evaluation (CVE) in accordance with 38 CFR Part 74 and VAAR 819.70 by submission of documentation of Veteran status, ownership and control sufficient to establish appropriate status, offerors must be both VISIBLE and VERIFIED by the Department of Veteran Affairs Center for Veterans Enterprises prior to contract award. Failure to be both VERIFIED by CVE and VISIBLE on VetBiz prior to contract award will result in the offeror's proposal being deemed non-responsive. All offerors are urged to contact the CVE and submit the aforementioned required documents to obtain CVE verification of their SDVOSB status if they have not already done so. 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009) (a) Definition. For the Department of Veterans Affairs, "Service-disabled veteran-owned small business concern": (1) Means a small business concern: (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans (or eligible surviving spouses); (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans (or eligible surviving spouses) or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and (iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov). (2) "Service-disabled veteran" means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (b) General. (1) Offers are solicited only from service-disabled veteran-owned small business concerns. Offers received from concerns that are not service-disabled veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a service-disabled veteran-owned small business concern. (c) Agreement. A service-disabled veteran owned small business concern agrees that in the performance of the contract, in the case of a contract for: (1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible service-disabled veteran-owned small business concerns; (2) Supplies (other than acquisition from a non-manufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible service-disabled veteran-owned small business concerns; (3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns; or (4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns. (d) A joint venture may be considered a service-disabled veteran owned small business concern if- (1) At least one member of the joint venture is a service-disabled veteran-owned small business concern, and makes the following representations: That it is a service-disabled veteran-owned small business concern, and that it is a small business concern under the North American Industry Classification Systems (NAICS) code assigned to the procurement; (2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement; and (3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation. (4) The joint venture meets the requirements of 13 CFR 125.15(b). (e) Any service-disabled veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program.

Y--MRI Building

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published July 15, 2015  -  Deadline August 31, 2015
cpvs

THIS IS A PRESOLICIATION NOTICE - A REQUEST FOR PROPOSAL WILL BE POSTED ON OR ABOUT July 30, 2015. MRI Site Prep VA259-15-R-0379 The Cheyenne Veteran Affairs Medical Center (VAMC) in Cheyenne, Wyoming has a requirement to construct a new 3,346 square foot MRI Building in accordance with all drawings, specifications, and scope of work, which will be posted with the request for proposal. The NAICS code for this procurement is 236220 with a small business size standard of $36.5 M. The magnitude of this project is between $1,000,000 and $2,000,000. This project will be 100% set-aside for Service-Disabled Veteran-Owned Small Businesses, as stated below. The POC for this project will be Andrew Stigen. He can be contacted at 307-433-3739 or email at Andrew.stigen@va.gov. Important Notice: Apparent successful offerors must apply for and receive verification from the Department of Veteran Affairs Center for Veterans Enterprise (CVE) in accordance with 38 CFR Part 74 and VAAR 819.70 by submission of documentation of Veteran status, ownership and control sufficient to establish appropriate status, offerors must be both VISIBLE and VERIFIED by the Department of Veteran Affairs Center for Veterans Enterprises at the time of of contract award. Failure to be both VERIRIED by CVE and VISIBLE on VetBiz at the time of contract award will result in the offeror's proposal being deemed non-responsive. All offerors are urged to contact the CVE and submit the aforementioned required documents to obtain CVE verification of their SDVOSB status if they have not already done so. VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009) (a) Definition. For the Department of Veterans Affairs, "Service-disabled veteran-owned small business concern": (1) Means a small business concern: (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans (or eligible surviving spouses); (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans (or eligible surviving spouses) or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and (iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov). (2) "Service-disabled veteran" means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (b) General. (1) Offers are solicited only from service-disabled veteran-owned small business concerns. Offers received from concerns that are not service-disabled veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a service-disabled veteran-owned small business concern. (c) Agreement. A service-disabled veteran owned small business concern agrees that in the performance of the contract, in the case of a contract for: (1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible service-disabled veteran-owned small business concerns; (2) Supplies (other than acquisition from a non-manufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible service-disabled veteran-owned small business concerns; (3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns; or (4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns. (d) A joint venture may be considered a service-disabled veteran owned small business concern if- (1) At least one member of the joint venture is a service-disabled veteran-owned small business concern, and makes the following representations: That it is a service-disabled veteran-owned small business concern, and that it is a small business concern under the North American Industry Classification Systems (NAICS) code assigned to the procurement; (2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement; and (3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation. (4) The joint venture meets the requirements of 13 CFR 125.15(b). (e) Any service-disabled veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program.

65--(C)(442)Small Frag Clavicle Tray, Distal Tray, and related parts and equipments.

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published June 22, 2015  -  Deadline July 3, 2015
cpvs

The Department of Veterans Affairs Medical Center, VISN 19 Network Contracting Office (NCO 19), on behalf of the below location, plans to contract by means of other than full and open competition for the various assortments of Smith & Nephew, Inc. medical equipment and instruments. The Government intends to award a sole source contract for this requirement. The NAICS code is 339112 and the Classification code is 6515. The suggested vendor is Smith & Nephew, Inc. , 7135 Goodleft Farm Parkway, Cordova, TN 38016. Requested items consist of the following listed below: STOCK # DESCRIPTION of SUPPLIES/SERVICES QUANTITY UNIT 71170097 PERIOSTEAL ELEVATOR-6MM CURVED 1 EA 71173592 T20 SELFRET SCREWDRIVER W/QC 120MM 2 EA 71173593 T20 SELF-RET SCREWDRIVER SHAFT - 178MM 2 EA 71177188 1.3MM CANN COUNTERSINK W/QC 1 EA 71811800 PERI-LOC 4.0MM P-T CANN SCREW SET-PLUG 1 EA 71810417 PERI-LOC SM FRAG PNS WIRS SET-PLUG 1 EA 71810419 PER-LOC SM FRAG PLATE SET-PLUG 1 EA 71810420 PERI-LOC SM FRG SCREW SET PLUG 1 EA 71803411 SUP MED CLAV LK PL 6H L 73MM 1 EA 71803412 SUP MED CLAV LK PL 7H L 85MM 1 EA 71823401 SUP MED CLAV LK PL 8H K 97MM 1 EA 71823402 SUP MED CLAV LK PL 10H L 121MM 1 EA 71173611 12 T7 SCREWDRIVER W/QC 62 MM 2 EA 71803413 SUP MED CLAV LK PL 6H R 73MM 1 EA 71803414 SUP MED CLAV LK PL 7H R 85MM 1 EA 71823409 SUP MED CLAV LK PL 8H R 97MM 1 EA 71823410 SUP MED CLAV LK PL 10H R 121MM 1 EA 71803415 SUP DIST CLAV LK PL (SHORT) L84MM 1 EA 71823403 SUP DIST CLAV LK PL L 109MM 1 EA 71803416 SUP DIST CLAV LK PL (SHORT) R 84MM 1 EA 71823404 SUP DIST CLAV LK PL R 109MM 1 EA 71803417 INF MED CLAV LK PL 6H 73MM 1 EA 71803418 INF MED CLAV LK PL 7H 85MM 1 EA 71173318 3.5 MM TAP QC 1 EA 71823405 INF MED CLAV LK PL 8H 96MM 1 EA 71823406 INF MED CLAV LK PL 10H 117MM 1 EA 71823407 INF DIST CLAV LK PL 81MM 1 EA 71170398 PERI-LOC CLAVICLE PLATE CADDY 1 EA 71161016 PERI-LOCK K-WIRE 1.6MM 1 BX 71823110 V-D-R KJ OK STD HE 3H L 62MM 1 EA 71823112 V-D-R-LCK PL STD HE 5H L 86MM 1 EA 71823114 V-D-R LCK PL STD HD 5H L 86MM 1 EA 71823116 V-D-R- KJ OK STD HD 5H R 86MM 1 EA 71823118 V-D-R LK PL WDE HD 3H L 62MM 1 EA 71823120 V-D-R LK PL WDE HD 3H L 86MM 1 EA 71170391 PER-LOC VOL DIST RAD TRY 1 EA 71823122 V-D-R LCK PL WDE HD 3H R 62 MM 1 EA 71823124 V-D-R LK PL WDE HD 5H R 86MM 1 EA 73802410 PERI-LOC 2.5 MM T7 LOCK SCREW 10MM S-T 6 EA 73802412 PERI-LOC 2.5MM T7 LOCK SCREW 12MM S-T 6 EA 73802414 PERO-LOC 2.5MM T7 LOCK SCREW 14MM S-T 6 EA 73802416 PERI-LOC 2.5MM T7 LOCK SCREW 16MM S-T 6 EA 73802418 PERI-LOC 2.5MM T7 LOCK SCREW 18MM S-T 6 EA 73802420 PERI-LOC 2.5MM T7 LOCK SCREW 20MM S-T 6 EA 73802422 PERI-LOC 2.5MM T7 LOCK SCREW 22MM S-T 6 EA 73802424 PERI-LOC 2.5MM T7 LOCK SCREW 24MM S-T 6 EA 71170709 PERI-LOC VDR CREW CADDY T7/T20 1 EA 73802426 PERI-LOC 2.5MM T7 LOCK SCREW 26MM S-T 6 EA 73802428 PERI-LOC 2.5MM T7 LOCK SCREW 26MM S-T 6 EA 73802510 PERI-LOC 2.5MM T7 CRTX SCREW 10MM S-T 6 EA 73802512 PERI-LOC 2.5MM T7 CRTX SCREW 12MM S-T 6 EA 73802514 PERI-LOC 2.5MM T7 CRTX SCREW 14MM S-T 6 EA 73802516 PERI-LOC 2.5MM T7 CRTX SCREW 16MM S-T 6 EA 73802518 PERI-LOC 2.5MM T7 CRTX SCREW 18MM S-T 6 EA 73802520 PERI-LOC 2.MM T7 CRTX SCREW 20MM S-T 6 EA 73802522 PERI-LOC 2.5MM T7 CRTX SCREW 22MM S-T 6 EA 73802524 PERI-LOC 2.5MM T7 CRTX SCREW 24MM S-T 6 EA 71173457 WDE DRKK GD BKCJ W.SET SCRWL 1 EA 73802526 PERI-LOC 2.5MM T7 CRTX SCREW 26MM S-T 6 EA 73802528 PERI-LOC 2.5MM T7 CRTX SCREW 28MM S-T 6 EA 73804010 PERI-LOC 3.5MM T20 CRTX SCREW 10MM S-T 6 EA 73804012 PERI-LOC 3.5MM T20 CRTX SCREW 12MM S-T 6 EA 73804014 PERI-LOC 3.5MM T20 CRTX SCREW 14MM S-T 6 EA 73804016 PERI-LOC 3.5MM T20 CRTZ SCREW 16MM S-T 6 EA 73804018 PERI-LOC 3.5MM T20 CRTX SCREW 18MM S-T 6 EA 73804020 PERI-LOC 3.5MM T20 CRTX SCREW 20MM S-T 6 EA 73805010 PERI-LOC 3.5MM T20 LOCK SCREW 10MM S-T 6 EA 73805012 PERI-LOC 3.5MM T20 LOCK SCREW 12MM S-T 6 EA 71173458 WDE DRLL GD BLCK W/SET SCRWR 1 EA 73805014 PERI-LOC 3.5MM T20 LOCK SCREW 14MM S-T 6 EA 73805016 PERI-LOC 3.5MM T20 LOCK SCREW 16MM S-T 6 EA 73805018 PERI-LOC 3.5 MM T20 LOCK SCREW 18MM S-T 6 EA 73805020 PERI-LOC 3.5MM T20 LOCK SCREW 20MM S-T 6 EA 7173362 2.7MM SHORT DRILL BIT W/QC 2 EA 71173555 2.0MM SHRT DRILL BIT W/QC 2 EA 71173489 STD DRLL GD BLCK W/SET SCRW 1 EA 71170045 SCRE FORCEPS 1 EA 71170063 WIRE BENDING PLIERS 1 EA 71173344 SMALL FRAG COUNTERSINK 1 EA 711773459 2.0 MM SHRT LCK DRILL GD-1OC 1 EA 71173528 CANN AO TO TRINKLE ADAPTOR 1 EA 71173529 2.7MM LCK DRILL GUIDE INSRT 1 EA 71173538 2.5MM LOCKING SCREW GUIDE 1 EA 7117354 REVERSE VERBRUGGE 190MM 1 EA 71173547 LARGE SCREWDRIVER HANDLE 1 EA 71170650 PERI-LOC SM FRAGE BASIC INST TRAY 1 EA 71170654 PERI-LOC SM FRAG SCREW CADDY 1 EA 71170655 PERILOC SM FRAG SCREW CADDY LID 1 EA 71170657 PERI-LOC SM FRAG PLATE CADDY 1 EA 71170659 PERI-LOC SM FRAG INST & IMPLANT SET 1 EA 71173490 ST DRKK GD BLCK W/SET SCRW R 1 EA 71170660 PERI-LOC SM FRAG INST & IMPLANT SET LID 1 EA 71173448 2.0MM LOCKING DRILL GUIDE 1 EA 71173449 2.0MM LCK DRILL GIDE INSERT 1 EA 71173450 2.7MM LOCKING DRILL GUIDE 1 EA 71173452 2.7MM LOCKING SCREW GUIDE 1 EA 71173491 2.0MM K-WIRE LCK GD-1 PC 1 EA 71173570 2.7MM NEUTRAL=/2.7MM COMP DRILL GUIDE 1 EA 71173594 2.7MM NEUT SLOT DRILL GUIDE 1 EA 71173571 2.0MM X 2,7MM DRILL GUIDE 1 EA 71173572 2.7MM X 3.5MM DRILL GUIDE 1 EA 71173523 SHORT 3.5 MM SCR DPTH GAUGE 1 EA 71173589 2.0MM DRILL GUIDE INSERT 1 EA 71173622 2.0NM TORQUE LIMITER 1 EA 71173614 T15 SELF-RET SCREWDRIVER W/QC 120MM 2 EA 71173592 T20 SELF-RET SCREWDRIER W/QC 120MM 2 EA 71173612 T20 REM SCREWDRIVER W/QC 178MM 1 EA 71173613 T15 REM SCREWDRIVER W/QC 178MM 1 EA 71173535 3.5MM HEXDRIVER SHAFT AO QC 1 EA 71173535 2.5MM HEXDRIVER SHAFT AO QC 1 EA 71173543 TEAR DROP SCREWDRIVER HANDLE 1 EA 71173590 PERI-LOC 2.7MM DRILL GIDE INSERT 1 EA 71173543 TEAR DROP SCREW DRIVER HANDLE 1 EA 71170057 HOHMANN RETRACTOR {} 8MM 2 EA 71173523 SHORT 3.5MM SCR DPTH GAUGE 1 EA 71173534 3.5MM SCREW DEPTH GAUGE 1 EA 71173637 T20 SELF-RET SCREWDRIVER 1 EA 71173579 4.7MM CANN DEXDRIVER SHAFT-127MM 1 EA 71117083 DIRECT MEASURE 4.0MM 1 EA 71173580 2.5MM CANN HEXDRIVER SHAFT - 120MM 1 EA 71173576 1.3MM X 2.7MM DRILL GUIDE 1 EA 71170031 HOLDING SLEEVE 1 EA 71173585 T15 SELF-RET SCREWDRIVER SHAFT - 178MM 2 EA Delivery Schedule: Delivery is to be "Upon Request" VISN 19 Locations: (442) Cheyenne VAMC, 2360 E Pershing Blvd., Cheyenne, WY 82001 All information is to be submitted at no cost or obligation to the Government. This is not a request for proposal. However, companies that can provide an equal product must submit their technical capabilities to include the technical specification of their product, past performance information, price and delivery time. The information submitted will be reviewed by the Government technical representatives for considering future requirements. Responses to this notice should include the following: name and address of company, Dun & Bradstreet number, business size, and any other pertinent information that demonstrates firm's ability to meet the above requirement. Submit capability packages no later than July 3, 2015, 12:01 PM, MST by email to: salim.williams@va.gov

65--(C)(442)Small Frag Clavicle Tray/Votal Distal Tray and related parts and equipment

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published July 2, 2015  -  Deadline July 9, 2015
cpvs

The Department of Veterans Affairs Medical Center, VISN 19 Network Contracting Office (NCO 19), on behalf of the below location, plans to contract by means of other than full and open competition for the various assortments of Smith & Nephew, Inc. medical equipment and instruments. The Government intends to award a sole source contract for this requirement. The NAICS code is 339112 and the Classification code is 6515. The suggested vendor is Smith & Nephew, Inc., 7135 Goodleft Farm Parkway, Cordova, TN 38016. Requested items consist of the following listed below: STOCK # DESCRIPTION of SUPPLIES/SERVICES QUANTITY UNIT 71170097 PERIOSTEAL ELEVATOR-6MM CURVED 1 EA 71173592 T20 SELFRET SCREWDRIVER W/QC 120MM 2 EA 71173593 T20 SELF-RET SCREWDRIVER SHAFT - 178MM 2 EA 71177188 1.3MM CANN COUNTERSINK W/QC 1 EA 71811800 PERI-LOC 4.0MM P-T CANN SCREW SET-PLUG 1 EA 71810417 PERI-LOC SM FRAG PNS WIRS SET-PLUG 1 EA 71810419 PER-LOC SM FRAG PLATE SET-PLUG 1 EA 71810420 PERI-LOC SM FRG SCREW SET PLUG 1 EA 71803411 SUP MED CLAV LK PL 6H L 73MM 1 EA 71803412 SUP MED CLAV LK PL 7H L 85MM 1 EA 71823401 SUP MED CLAV LK PL 8H K 97MM 1 EA 71823402 SUP MED CLAV LK PL 10H L 121MM 1 EA 71173611 12 T7 SCREWDRIVER W/QC 62 MM 2 EA 71803413 SUP MED CLAV LK PL 6H R 73MM 1 EA 71803414 SUP MED CLAV LK PL 7H R 85MM 1 EA 71823409 SUP MED CLAV LK PL 8H R 97MM 1 EA 71823410 SUP MED CLAV LK PL 10H R 121MM 1 EA 71803415 SUP DIST CLAV LK PL (SHORT) L84MM 1 EA 71823403 SUP DIST CLAV LK PL L 109MM 1 EA 71803416 SUP DIST CLAV LK PL (SHORT) R 84MM 1 EA 71823404 SUP DIST CLAV LK PL R 109MM 1 EA 71803417 INF MED CLAV LK PL 6H 73MM 1 EA 71803418 INF MED CLAV LK PL 7H 85MM 1 EA 71173318 3.5 MM TAP QC 1 EA 71823405 INF MED CLAV LK PL 8H 96MM 1 EA 71823406 INF MED CLAV LK PL 10H 117MM 1 EA 71823407 INF DIST CLAV LK PL 81MM 1 EA 71170398 PERI-LOC CLAVICLE PLATE CADDY 1 EA 71161016 PERI-LOCK K-WIRE 1.6MM 1 BX 71823110 V-D-R KJ OK STD HE 3H L 62MM 1 EA 71823112 V-D-R-LCK PL STD HE 5H L 86MM 1 EA 71823114 V-D-R LCK PL STD HD 5H L 86MM 1 EA 71823116 V-D-R- KJ OK STD HD 5H R 86MM 1 EA 71823118 V-D-R LK PL WDE HD 3H L 62MM 1 EA 71823120 V-D-R LK PL WDE HD 3H L 86MM 1 EA 71170391 PER-LOC VOL DIST RAD TRY 1 EA 71823122 V-D-R LCK PL WDE HD 3H R 62 MM 1 EA 71823124 V-D-R LK PL WDE HD 5H R 86MM 1 EA 73802410 PERI-LOC 2.5 MM T7 LOCK SCREW 10MM S-T 6 EA 73802412 PERI-LOC 2.5MM T7 LOCK SCREW 12MM S-T 6 EA 73802414 PERO-LOC 2.5MM T7 LOCK SCREW 14MM S-T 6 EA 73802416 PERI-LOC 2.5MM T7 LOCK SCREW 16MM S-T 6 EA 73802418 PERI-LOC 2.5MM T7 LOCK SCREW 18MM S-T 6 EA 73802420 PERI-LOC 2.5MM T7 LOCK SCREW 20MM S-T 6 EA 73802422 PERI-LOC 2.5MM T7 LOCK SCREW 22MM S-T 6 EA 73802424 PERI-LOC 2.5MM T7 LOCK SCREW 24MM S-T 6 EA 71170709 PERI-LOC VDR CREW CADDY T7/T20 1 EA 73802426 PERI-LOC 2.5MM T7 LOCK SCREW 26MM S-T 6 EA 73802428 PERI-LOC 2.5MM T7 LOCK SCREW 26MM S-T 6 EA 73802510 PERI-LOC 2.5MM T7 CRTX SCREW 10MM S-T 6 EA 73802512 PERI-LOC 2.5MM T7 CRTX SCREW 12MM S-T 6 EA 73802514 PERI-LOC 2.5MM T7 CRTX SCREW 14MM S-T 6 EA 73802516 PERI-LOC 2.5MM T7 CRTX SCREW 16MM S-T 6 EA 73802518 PERI-LOC 2.5MM T7 CRTX SCREW 18MM S-T 6 EA 73802520 PERI-LOC 2.MM T7 CRTX SCREW 20MM S-T 6 EA 73802522 PERI-LOC 2.5MM T7 CRTX SCREW 22MM S-T 6 EA 73802524 PERI-LOC 2.5MM T7 CRTX SCREW 24MM S-T 6 EA 71173457 WDE DRKK GD BKCJ W.SET SCRWL 1 EA 73802526 PERI-LOC 2.5MM T7 CRTX SCREW 26MM S-T 6 EA 73802528 PERI-LOC 2.5MM T7 CRTX SCREW 28MM S-T 6 EA 73804010 PERI-LOC 3.5MM T20 CRTX SCREW 10MM S-T 6 EA 73804012 PERI-LOC 3.5MM T20 CRTX SCREW 12MM S-T 6 EA 73804014 PERI-LOC 3.5MM T20 CRTX SCREW 14MM S-T 6 EA 73804016 PERI-LOC 3.5MM T20 CRTZ SCREW 16MM S-T 6 EA 73804018 PERI-LOC 3.5MM T20 CRTX SCREW 18MM S-T 6 EA 73804020 PERI-LOC 3.5MM T20 CRTX SCREW 20MM S-T 6 EA 73805010 PERI-LOC 3.5MM T20 LOCK SCREW 10MM S-T 6 EA 73805012 PERI-LOC 3.5MM T20 LOCK SCREW 12MM S-T 6 EA 71173458 WDE DRLL GD BLCK W/SET SCRWR 1 EA 73805014 PERI-LOC 3.5MM T20 LOCK SCREW 14MM S-T 6 EA 73805016 PERI-LOC 3.5MM T20 LOCK SCREW 16MM S-T 6 EA 73805018 PERI-LOC 3.5 MM T20 LOCK SCREW 18MM S-T 6 EA 73805020 PERI-LOC 3.5MM T20 LOCK SCREW 20MM S-T 6 EA 7173362 2.7MM SHORT DRILL BIT W/QC 2 EA 71173555 2.0MM SHRT DRILL BIT W/QC 2 EA 71173489 STD DRLL GD BLCK W/SET SCRW 1 EA 71170045 SCRE FORCEPS 1 EA 71170063 WIRE BENDING PLIERS 1 EA 71173344 SMALL FRAG COUNTERSINK 1 EA 711773459 2.0 MM SHRT LCK DRILL GD-1OC 1 EA 71173528 CANN AO TO TRINKLE ADAPTOR 1 EA 71173529 2.7MM LCK DRILL GUIDE INSRT 1 EA 71173538 2.5MM LOCKING SCREW GUIDE 1 EA 7117354 REVERSE VERBRUGGE 190MM 1 EA 71173547 LARGE SCREWDRIVER HANDLE 1 EA 71170650 PERI-LOC SM FRAGE BASIC INST TRAY 1 EA 71170654 PERI-LOC SM FRAG SCREW CADDY 1 EA 71170655 PERILOC SM FRAG SCREW CADDY LID 1 EA 71170657 PERI-LOC SM FRAG PLATE CADDY 1 EA 71170659 PERI-LOC SM FRAG INST & IMPLANT SET 1 EA 71173490 ST DRKK GD BLCK W/SET SCRW R 1 EA 71170660 PERI-LOC SM FRAG INST & IMPLANT SET LID 1 EA 71173448 2.0MM LOCKING DRILL GUIDE 1 EA 71173449 2.0MM LCK DRILL GIDE INSERT 1 EA 71173450 2.7MM LOCKING DRILL GUIDE 1 EA 71173452 2.7MM LOCKING SCREW GUIDE 1 EA 71173491 2.0MM K-WIRE LCK GD-1 PC 1 EA 71173570 2.7MM NEUTRAL=/2.7MM COMP DRILL GUIDE 1 EA 71173594 2.7MM NEUT SLOT DRILL GUIDE 1 EA 71173571 2.0MM X 2,7MM DRILL GUIDE 1 EA 71173572 2.7MM X 3.5MM DRILL GUIDE 1 EA 71173523 SHORT 3.5 MM SCR DPTH GAUGE 1 EA 71173589 2.0MM DRILL GUIDE INSERT 1 EA 71173622 2.0NM TORQUE LIMITER 1 EA 71173614 T15 SELF-RET SCREWDRIVER W/QC 120MM 2 EA 71173592 T20 SELF-RET SCREWDRIER W/QC 120MM 2 EA 71173612 T20 REM SCREWDRIVER W/QC 178MM 1 EA 71173613 T15 REM SCREWDRIVER W/QC 178MM 1 EA 71173535 3.5MM HEXDRIVER SHAFT AO QC 1 EA 71173535 2.5MM HEXDRIVER SHAFT AO QC 1 EA 71173543 TEAR DROP SCREWDRIVER HANDLE 1 EA 71173590 PERI-LOC 2.7MM DRILL GIDE INSERT 1 EA 71173543 TEAR DROP SCREW DRIVER HANDLE 1 EA 71170057 HOHMANN RETRACTOR {} 8MM 2 EA 71173523 SHORT 3.5MM SCR DPTH GAUGE 1 EA 71173534 3.5MM SCREW DEPTH GAUGE 1 EA 71173637 T20 SELF-RET SCREWDRIVER 1 EA 71173579 4.7MM CANN DEXDRIVER SHAFT-127MM 1 EA 71117083 DIRECT MEASURE 4.0MM 1 EA 71173580 2.5MM CANN HEXDRIVER SHAFT - 120MM 1 EA 71173576 1.3MM X 2.7MM DRILL GUIDE 1 EA 71170031 HOLDING SLEEVE 1 EA 71173585 T15 SELF-RET SCREWDRIVER SHAFT - 178MM 2 EA Delivery Schedule: Delivery is to be "Upon Request" VISN 19 Locations: (442) Cheyenne VAMC, 2360 E Pershing Blvd., Cheyenne, WY 82001 All information is to be submitted at no cost or obligation to the Government. This is not a request for proposal. However, companies that can provide an equal product must submit their technical capabilities to include the technical specification of their product, past performance information, price and delivery time. The information submitted will be reviewed by the Government technical representatives for considering future requirements. Responses to this notice should include the following: name and address of company, Dun & Bradstreet number, business size, and any other pertinent information that demonstrates firm's ability to meet the above requirement. Submit capability packages no later than July 9, 2015, 12:01 PM, MST by email to: salim.williams@va.gov

65--(C)(442) Orthopedic Trays

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published September 22, 2015  -  Deadline September 25, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is: VA259-15-Q-0668, and it is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-76 dated July 25, 2014 This solicitation is set-aside for Small Business. NAICS: 339112 and the small business size standard is 500 employees. The government anticipates awarding a firm-fixed price purchase order. This RFQ closes on September 25, 2015 at 3:00PM EST. Proposal must be received on or before the closing date and time of this RFQ. All responding vendors must be registered in SAM.GOV & be SDVOSB VERIFIED through VETBIZ.GOV, if applicable, in order to receive an award. Questions regarding this RFQ shall be directed to: salim.williams@va.gov Description: The Cheyenne VA Medical Center, 2360 E. Pershing BLVD, Cheyenne, WY 82001 has a requirement for a BRAND NAME ONLY requirement for medical instruments and components. These instruments and components are required to replace and/or augment currently used medical instrument sets at the Cheyenne VA Medical Center. (SEE COMPLETE LISTING BELOW) BRAND NAME ONLY. Manufacturer: SMITH & NEPHEW. Salient characteristics: sets must include all the sizes being requested and be manufactured by SMITH & NEPHEW. No equal or equivalent items, components, or pieces will be accepted. Request for Quote (RFQ), prospective contractor quotes shall be submitted NLT than the RFQ due date to: salim.williams@va.gov. Required Line Items: 1 EA 71170097 PERIOSTEAL ELEVATOR-6MM CURVED 2 EA 71173592 T20 SELF-RET SCREWDRIVER W/QC 120MM 2 EA 71173593 T20 SELF-RET SCREWDRIVER SHAFT - 178MM 1 EA 71177188 1.3MM CANN COUNTERSINK W/QC 1 EA 71811800 PERI-LOC 4.0MM P-T CANN SCREW SET - PLUG SYSTEM 2 EA 121810 CANNULATED SCREW 10MM 4.0 2 EA 121812 CANNULATED SCREW 12MM 4.0 2 EA 121814 CANNULATED SCREW 14MM 4.0 2 EA 121816 CANNULATED SCREW 16MM 4.0 2 EA 121818 CANNULATED SCREW 18MM 4.0 2 EA 121820 CANNULATED SCREW 20MM 4.0 2 EA 121822 CANNULATED SCREW 22MM 4.0 2 EA 121824 CANNULATED SCREW 24MM 4.0 2 EA 121826 CANNULATED SCREW 26MM 4.0 2 EA 121828 CANNULATED SCREW 28MM 4.0 2 EA 121830 CANNULATED SCREW 30MM 4.0 2 EA 121832 CANNULATED SCREW 32MM 4.0 2 EA 121834 CANNULATED SCREW 34MM 4.0 2 EA 121836 CANNULATED SCREW 36MM 4.0 2 EA 121838 CANNULATED SCREW 38MM 4.0 2 EA 121840 CANNULATED SCREW 40MM 4.0 2 EA 121844 CANNULATED SCREW 44MM 4.0 2 EA 121846 CANNULATED SCREW 46MM 4.0 2 EA 121848 CANNULATED SCREW 48MM 4.0 2 EA 121850 CANNULATED SCREW 50MM 4.0 2 EA 121852 CANNULATED SCREW 52MM 4.0 2 EA 121854 CANNULATED SCREW 54MM 4.0 2 EA 121856 CANNULATED SCREW 56MM 4.0 2 EA 121858 CANNULATED SCREW 58MM 4.0 2 EA 121860 CANNULATED SCREW 60MM 4.0 1 EA 71170686 PERI-LOC 4.0MM P-T CANN SCR CDDY - PLUG 1 EA 71170687 PERI-LOC 4.0MM P-T CANN SCR CD LD - PLUG 2 EA 121842 CANNULATED SCREW 42MM 4.0 1 EA 71810417 PERI-LOC SM FRAG PNS WIRS SET - PLUG SYSTEM 6 EA 71161012 PERI-LOC K-WIRE 1.25MM 6 EA 71161016 PERI-LOC K-WIRE 1.6MM 6 EA 71161020 PERI-LOC K-WIRE 2.0MM 1 EA 71173318 3.5MM TAP QC 1 EA 71173366 2.7MM TAP W/QC 1 EA 71173386 4.0MM CANCELLOUS TAP QC 1 EA 71173501 2.0MM DRILL W/QC 2 EA 71173502 2.7MM SHORT DRILL {} BIT W/QC 2 EA 71173503 2.7MM DRILL {} BIT W/QC 1 EA 71173504 3.5MM SHORT DRILL {} BIT W/QC 2 EA 71173582 PERI-LOC 2.7MM DRILL GUIDE PF PIN 14MM 2 EA 71173583 PERI-LOC 2.7MM DRILL GUIDE PF PIN 25MM 2 EA 71170812 2.7MM DRILL GUIDE PF PIN 40MM 6 EA 128047 GUIDE PIN TRO PT 1.3 X140 1 EA 71173584 4.0MM CANNULATED TAP W/ QC 1 EA 71173581 2.7MM CANNULATED DRILL BIT - 155MM 1 EA 71810419 PERI-LOC SM FRG PLATE SET - PLUG SYSTEM 1 EA 71829004 3.5MM LCK TUBULAR PL 4 H 57MM 1 EA 71829006 3.5MM LCK TUBULAR PL 6H 82MM 1 EA 71829008 3.5MM LCK TUBULAR PL 8H 107MM 1 EA 71829010 3.5MM LCK TUBULAR PL 10H 133MM 1 EA 71829704 3.5MM LCK COMP PL 4H 67MM 1 EA 71829706 3.5MM LCK COMP PL 6H 96MM 1 EA 71829708 3.5MM LCK COMP PL 8H 125MM 1 EA 71829710 3.5MM LCK COMP PL 10H 154MM 1 EA 71829712 3.5MM LCK COMP PL 12H 183MM 1 EA 71829403 3.5MM COMP PL 3HL 54MM 1 EA 71829404 3.5MM COMP PL 4HL 67MM 1 EA 71829405 3.5MM COMP PL 5HL 80MM 1 EA 71829406 3.5MM COMP PL 6HL 93MM 1 EA 71829407 3.5MM COMP PL 7HL 106MM 1 EA 71829408 3.5MM COMP PL 8HL 119MM 1 EA 71829409 3.5MM COMP PL 9HL 132MM 1 EA 71829410 3.5MM COMP PL 10HL 145MM 1 EA 71822604 3.5MM LK RECON PL 4H 46MM 1 EA 71822606 3.5MM LK RECON PL 6H 70MM 1 EA 71822608 3.5MM LK RECON PL 8H 94MM 1 EA 71822610 3.5MM LK RECON PL 10H 118MM 1 EA 71822612 3.5MM LK RECON PL 12H 142MM 1 EA 71821303 3.5MM PRXHUM LK PL 3H R 89MM 1 EA 71821305 3.5MM PRXHUM LK PL 5H R 115MM 1 EA 71821403 3.5MM PRXHUM LK PL 3H L 89MM 1 EA 71821405 3.5MM PRXHUM LK PL 5H L 115MM 1 EA 71829007 3.5MM LCK TUBULAR PL 7H 95MM 1 EA 71829707 3.5MM LCK COMP PL 7H 111MM 1 EA 71810420 PERI-LOC SM FRG SCREW SET - PLUG SYSTEM 6 EA 71143107 7.0MM O.D. WASHER 6 EA 73822310 PERI-LOC 2.7MM T15 LOCK SCREW 10MM S-T 6 EA 73822312 PERI-LOC 2.7MM T15 LOCK SCREW 12MM S-T 6 EA 73822314 PERI-LOC 2.7MM T15 LOCK SCREW 14MM S-T 6 EA 73822316 PERI-LOC 2.7MM T15 LOCK SCREW 16MM S-T 6 EA 73822318 PERI-LOC 2.7MM T15 LOCK SCREW 18MM S-T 6 EA 73822320 PERI-LOC 2.7MM T15 LOCK SCREW 20MM S-T 3 EA 73822322 PERI-LOC 2.7MM T15 LOCK SCREW 22MM S-T 3 EA 73822324 PERI-LOC 2.7MM T15 LOCK SCREW 24MM S-T 3 EA 73822326 PERI-LOC 2.7MM T15 LOCK SCREW 26MM S-T 3 EA 73822328 PERI-LOC 2.7MM T15 LOCK SCREW 28MM S-T 3 EA 73822330 PERI-LOC 2.7MM T15 LOCK SCREW 30MM S-T 3 EA 73822332 PERI-LOC 2.7MM T15 LOCK SCREW 32MM S-T 3 EA 73822334 PERI-LOC 2.7MM T15 LOCK SCREW 34MM S-T 3 EA 73822336 PERI-LOC 2.7MM T15 LOCK SCREW 36MM S-T 3 EA 73822338 PERI-LOC 2.7MM T15 LOCK SCREW 38MM S-T 6 EA 73822340 PERI-LOC 2.7MM T15 LOCK SCREW 40MM S-T 6 EA 73822350 PERI-LOC 2.7MM T15 LOCK SCREW 50MM S-T 6 EA 73822355 PERI-LOC 2.7MM T15 LOCK SCREW 55MM S-T 3 EA 73822360 PERI-LOC 2.7MM T15 LOCK SCREW 60MM S-T 4 EA 73823010 PERI-LOC 2.7MM T15 CRTX SCREW 10MM S-T 4 EA 73823012 PERI-LOC 2.7MM T15 CRTX SCREW 12MM S-T 4 EA 73823014 PERI-LOC 2.7MM T15 CRTX SCREW 14MM S-T 4 EA 73823016 PERI-LOC 2.7MM T15 CRTX SCREW 16MM S-T 2 EA 73823018 PERI-LOC 2.7MM T15 CRTX SCREW 18MM S-T 2 EA 73823020 PERI-LOC 2.7MM T15 CRTX SCREW 20MM S-T 2 EA 73823022 PERI-LOC 2.7MM T15 CRTX SCREW 22MM S-T 2 EA 73823024 PERI-LOC 2.7MM T15 CRTX SCREW 24MM S-T 2 EA 73823026 PERI-LOC 2.7MM T15 CRTX SCREW 26MM S-T 2 EA 73823028 PERI-LOC 2.7MM T15 CRTX SCREW 28MM S-T 2 EA 73823030 PERI-LOC 2.7MM T15 CRTX SCREW 30MM S-T 2 EA 73823032 PERI-LOC 2.7MM T15 CRTX SCREW 32MM S-T 2 EA 73823034 PERI-LOC 2.7MM T15 CRTX SCREW 34MM S-T 2 EA 73823036 PERI-LOC 2.7MM T15 CRTX SCREW 36MM S-T 2 EA 73823038 PERI-LOC 2.7MM T15 CRTX SCREW 38MM S-T 4 EA 73823040 PERI-LOC 2.7MM T15 CRTX SCREW 40MM S-T 4 EA 73823050 PERI-LOC 2.7MM T15 CRTX SCREW 50MM S-T 4 EA 73823055 PERI-LOC 2.7MM T15 CRTX SCREW 55MM S-T 2 EA 73823060 PERI-LOC 2.7MM T15 CRTX SCREW 60MM S-T 8 EA 73824010 PERI-LOC 3.5MM T20 CRTX SCREW 10MM S-T 8 EA 73824012 PERI-LOC 3.5MM T20 CRTX SCREW 12MM S-T 8 EA 73824014 PERI-LOC 3.5MM T20 CRTX SCREW 14MM S-T 8 EA 73824016 PERI-LOC 3.5MM T20 CRTX SCREW 16MM S-T 8 EA 73824018 PERI-LOC 3.5MM T20 CRTX SCREW 18MM S-T 4 EA 73824020 PERI-LOC 3.5MM T20 CRTX SCREW 20MM S-T 4 EA 73824022 PERI-LOC 3.5MM T20 CRTX SCREW 22MM S-T 4 EA 73824024 PERI-LOC 3.5MM T20 CRTX SCREW 24MM S-T 4 EA 73824026 PERI-LOC 3.5MM T20 CRTX SCREW 26MM S-T 4 EA 73824028 PERI-LOC 3.5MM T20 CRTX SCREW 28MM S-T 4 EA 73824030 PERI-LOC 3.5MM T20 CRTX SCREW 30MM S-T 4 EA 73824032 PERI-LOC 3.5MM T20 CRTX SCREW 32MM S-T 4 EA 73824034 PERI-LOC 3.5MM T20 CRTX SCREW 34MM S-T 4 EA 73824036 PERI-LOC 3.5MM T20 CRTX SCREW 36MM S-T 4 EA 73824038 PERI-LOC 3.5MM T20 CRTX SCREW 38MM S-T 4 EA 73824040 PERI-LOC 3.5MM T20 CRTX SCREW 40MM S-T 4 EA 73824050 PERI-LOC 3.5MM T20 CRTX SCREW 50MM S-T 4 EA 73824055 PERI-LOC 3.5MM T20 CRTX SCREW 55MM S-T 4 EA 73824060 PERI-LOC 3.5MM T20 CRTX SCREW 60MM S-T 8 EA 73825010 PERI-LOC 3.5MM T20 LOCK SCREW 10MM S-T 8 EA 73825012 PERI-LOC 3.5MM T20 LOCK SCREW 12MM S-T 8 EA 73825014 PERI-LOC 3.5MM T20 LOCK SCREW 14MM S-T 8 EA 73825016 PERI-LOC 3.5MM T20 LOCK SCREW 16MM S-T 8 EA 73825018 PERI-LOC 3.5MM T20 LOCK SCREW 18MM S-T 4 EA 73825020 PERI-LOC 3.5MM T20 LOCK SCREW 20MM S-T 4 EA 73825022 PERI-LOC 3.5MM T20 LOCK SCREW 22MM S-T 4 EA 73825024 PERI-LOC 3.5MM T20 LOCK SCREW 24MM S-T 4 EA 73825026 PERI-LOC 3.5MM T20 LOCK SCREW 26MM S-T 4 EA 73825028 PERI-LOC 3.5MM T20 LOCK SCREW 28MM S-T 4 EA 73825030 PERI-LOC 3.5MM T20 LOCK SCREW 30MM S-T 4 EA 73825032 PERI-LOC 3.5MM T20 LOCK SCREW 32MM S-T 4 EA 73825034 PERI-LOC 3.5MM T20 LOCK SCREW 34MM S-T 4 EA 73825036 PERI-LOC 3.5MM T20 LOCK SCREW 36MM S-T 4 EA 73825038 PERI-LOC 3.5MM T20 LOCK SCREW 38MM S-T 4 EA 73825040 PERI-LOC 3.5MM T20 LOCK SCREW 40MM S-T 4 EA 73825050 PERI-LOC 3.5MM T20 LOCK SCREW 50MM S-T 4 EA 73825055 PERI-LOC 3.5MM T20 LOCK SCREW 55MM S-T 4 EA 73825060 PERI-LOC 3.5MM T20 LOCK SCREW 60MM S-T 4 EA 73824042 PERI-LOC 3.5MM T20 CRTX SCREW 42MM S-T 4 EA 73824044 PERI-LOC 3.5MM T20 CRTX SCREW 44MM S-T 4 EA 73824046 PERI-LOC 3.5MM T20 CRTX SCREW 46MM S-T 4 EA 73824048 PERI-LOC 3.5MM T20 CRTX SCREW 48MM S-T 4 EA 73825042 PERI-LOC 3.5MM T20 LOCK SCREW 42MM S-T 4 EA 73825044 PERI-LOC 3.5MM T20 LOCK SCREW 44MM S-T 4 EA 73825046 PERI-LOC 3.5MM T20 LOCK SCREW 46MM S-T 4 EA 73825048 PERI-LOC 3.5MM T20 LOCK SCREW 48MM S-T 6 EA 73822342 PERI-LOC 2.7MM T15 LOCK SCREW 42MM S-T 6 EA 73822344 PERI-LOC 2.7MM T15 LOCK SCREW 44MM S-T 6 EA 73822346 PERI-LOC 2.7MM T15 LOCK SCREW 46MM S-T 6 EA 73822348 PERI-LOC 2.7MM T15 LOCK SCREW 48MM S-T 4 EA 73823042 PERI-LOC 2.7MM T15 CRTX SCREW 42MM S-T 4 EA 73823044 PERI-LOC 2.7MM T15 CRTX SCREW 44MM S-T 4 EA 73823046 PERI-LOC 2.7MM T15 CRTX SCREW 46MM S-T 4 EA 73823048 PERI-LOC 2.7MM T15 CRTX SCREW 48MM S-T 1 EA 71803411 SUP MED CLAV LK PL 6H L 73MM 1 EA 71803412 SUP MED CLAV LK PL 7H L 85MM 1 EA 71823401 SUP MED CLAV LK PL 8H L 97MM 1 EA 71823402 SUP MED CLAV LK PL 10H L 121MM 2 EA 71173611 T7 SCREWDRIVER W/QC 62MM 1 EA 71803413 SUP MED CLAV LK PL 6H R 73MM 1 EA 71803414 SUP MED CLAV LK PL 7H R 85MM 1 EA 71823409 SUP MED CLAV LK PL 8H R 97MM 1 EA 71823410 SUP MED CLAV LK PL 10H R 121MM 1 EA 71803415 SUP DIST CLAV LK PL (SHORT) L 84MM 1 EA 71823403 SUP DIST CLAV LK PL L 109MM 1 EA 71803416 SUP DIST CLAV LK PL (SHORT) R 84MM 1 EA 71823404 SUP DIST CLAV LK PL R 109MM 1 EA 71803417 INF MED CLAV LK PL 6H 73MM 1 EA 71803418 INF MED CLAV LK PL 7H 85MM 1 EA 71173318 3.5MM TAP QC 1 EA 71823405 INF MED CLAV LK PL 8H 96MM 1 EA 71823406 INF MED CLAV LK PL 10H 117MM 1 EA 71823407 INF DIST CLAV LK PL 81MM 1 EA 71170398 PERI-LOC CLAVICLE PLATE CADDY 1 BX 71161016 PERI-LOC K-WIRE 1.6MM 1 EA 71823110 V-D-R LK PL STD HD 3H L 62MM 1 EA 71823112 V-D-R LCK PL STD HD 5H L 86MM 1 EA 71823114 V-D-R LK PL STD HD 3H R 62MM 1 EA 71823116 V-D-R LK PL STD HD 5H R 86MM 1 EA 71823118 V-D-R LK PL WDE HD 3H L 62MM 1 EA 71823120 V-D-R LCK PL WDE HD 5H L 86MM 1 EA 71170391 PERI-LOC VOL DIST RAD TRY 1 EA 71823122 V-D-R LK PL WDE HD 3H R 62MM 1 EA 71823124 V-D-R LK PL WDE HD 5H R 86MM 6 EA 73802410 PERI-LOC 2.5MM T7 LOCK SCREW 10MM S-T 6 EA 73802412 PERI-LOC 2.5MM T7 LOCK SCREW 12MM S-T 6 EA 73802414 PERI-LOC 2.5MM T7 LOCK SCREW 14MM S-T 6 EA 73802416 PERI-LOC 2.5MM T7 LOCK SCREW 16MM S-T 6 EA 73802418 PERI-LOC 2.5MM T7 LOCK SCREW 18MM S-T 6 EA 73802420 PERI-LOC 2.5MM T7 LOCK SCREW 20MM S-T 6 EA 73802422 PERI-LOC 2.5MM T7 LOCK SCREW 22MM S-T 6 EA 73802424 PERI-LOC 2.5MM T7 LOCK SCREW 24MM S-T 1 EA 71170709 PERI-LOC VDR SCREW CADDY T7/T20 6 EA 73802426 PERI-LOC 2.5MM T7 LOCK SCREW 26MM S-T 6 EA 73802428 PERI-LOC 2.5MM T7 LOCK SCREW 28MM S-T 6 EA 73802510 PERI-LOC 2.5MM T7 CRTX SCREW 10MM S-T 6 EA 73802512 PERI-LOC 2.5MM T7 CRTX SCREW 12MM S-T 6 EA 73802514 PERI-LOC 2.5MM T7 CRTX SCREW 14MM S-T 6 EA 73802516 PERI-LOC 2.5MM T7 CRTX SCREW 16MM S-T 6 EA 73802518 PERI-LOC 2.5MM T7 CRTX SCREW 18MM S-T 6 EA 73802520 PERI-LOC 2.5MM T7 CRTX SCREW 20MM S-T 6 EA 73802522 PERI-LOC 2.5MM T7 CRTX SCREW 22MM S-T 6 EA 73802524 PERI-LOC 2.5MM T7 CRTX SCREW 24MM S-T 1 EA 71173457 WDE DRLL GD BLCK W/ SET SCRW L 6 EA 73802526 PERI-LOC 2.5MM T7 CRTX SCREW 26MM S-T 6 EA 73802528 PERI-LOC 2.5MM T7 CRTX SCREW 28MM S-T 6 EA 73804010 PERI-LOC 3.5MM T20 CRTX SCREW 10MM S-T 6 EA 73804010 PERI-LOC 3.5MM T20 CRTX SCREW 10MM S-T 6 EA 73804012 PERI-LOC 3.5MM T20 CRTX SCREW 12MM S-T 6 EA 73804014 PERI-LOC 3.5MM T20 CRTX SCREW 14MM S-T 6 EA 73804016 PERI-LOC 3.5MM T20 CRTX SCREW 16MM S-T 6 EA 73804018 PERI-LOC 3.5MM T20 CRTX SCREW 18MM S-T 6 EA 73804020 PERI-LOC 3.5MM T20 CRTX SCREW 20MM S-T 6 EA 73805010 PERI-LOC 3.5MM T20 LOCK SCREW 10MM S-T 6 EA 73805012 PERI-LOC 3.5MM T20 LOCK SCREW 12MM S-T 1 EA 71173458 WDE DRLL GD BLCK W/ SET SCRW R 6 EA 73805014 PERI-LOC 3.5MM T20 LOCK SCREW 14MM S-T 6 EA 73805016 PERI-LOC 3.5MM T20 LOCK SCREW 16MM S-T 6 EA 73805018 PERI-LOC 3.5MM T20 LOCK SCREW 18MM S-T 6 EA 73805020 PERI-LOC 3.5MM T20 LOCK SCREW 20MM S-T 2 EA 71173362 2.7MM SHORT DRILL BIT W/QC 2 EA 71173555 2.0MM SHRT DRLL BIT W/QC 1 EA 71173489 STD DRLL GD BLCK W/ SET SCRW L 1 EA 71170045 SCREW FORCEPS 1 EA 71170063 WIRE BENDING PLIERS 1 EA 71173344 SMALL FRAG COUNTERSINK 1 EA 71173459 2.0MM SHRT LCK DRILL GD - 1 PC 1 EA 71173528 CANN AO TO TRINKLE ADAPTOR 1 EA 71173529 2.7MM LCK DRILL GUIDE INSRT 1 EA 71173538 3.5MM LOCKING SCREW GUIDE 1 EA 71173547 LARGE SCREWDRIVER HANDLE 1 EA 71170650 PERI-LOC SM FRAG BASIC INST TRAY 1 EA 71170654 PERI-LOC SM FRAG SCREW CADDY 1 EA 71170655 PERI-LOC SM FRAG SCREW CADDY LID 1 EA 71170657 PERI-LOC SM FRAG PLATE CADDY 1 EA 71170659 PERI-LOC SM FRAG INST & IMPLANT SET 1 EA 71173490 STD DRLL GD BLCK W/ SET SCRW R 1 EA 71170660 PERI-LOC SM FRAG INST & IMPLANT SET LID 1 EA 71173448 2.0MM LOCKING DRILL GUIDE 1 EA 71173449 2.0MM LCK DRILL GUIDE INSERT 1 EA 71173450 2.7MM LOCKING DRILL GUIDE 1 EA 71173452 2.7MM LOCKING SCREW GUIDE 1 EA 71173491 2.0MM K-WIRE LCK GD - 1 PC 1 EA 71173570 2.7MM NEUTRAL/2.7MM COMP DRILL GUIDE 1 EA 71173594 2.7MM NEUT SLOT DRILL GUIDE 1 EA 71173571 2.0MM X 2.7MM DRILL GUIDE 1 EA 71173572 2.7MM X 3.5MM DRILL GUIDE 1 EA 71173523 SHORT 3.5MM SCR DPTH GAUGE 1 EA 71173589 PERI-LOC 2.0MM DRILL GUIDE INSERT 1 EA 71173622 2.0NM TORQUE LIMITER 2 EA 71173614 T15 SELF-RET SCREWDRIVER W/QC 120MM 2 EA 71173592 T20 SELF-RET SCREWDRIVER W/QC 120MM 1 EA 71173612 T20 REM SCREWDRIVER W/QC 178MM 1 EA 71173613 T15 REM SCREWDRIVER W/QC 178MM 1 EA 71173535 2.5MM HEXDRIVER SHAFT AO QC 1 EA 71173535 2.5MM HEXDRIVER SHAFT AO QC 1 EA 71173543 TEAR DROP SCREWDRIVER HANDLE 1 EA 71173590 PERI-LOC 2.7MM DRILL GUIDE INSERT 1 EA 71173543 TEAR DROP SCREWDRIVER HANDLE 2 EA 71170057 HOHMANN RETRACTOR {} 8MM 1 EA 71173523 SHORT 3.5MM SCR DPTH GAUGE 1 EA 71173534 3.5 MM SCREW DEPTH GAUGE 1 EA 71173637 T20 SELF-RET SCREWDRIVER 1 EA 71173579 4.7MM CANN HEXDRIVER SHAFT - 127MM 1 EA 71117083 DIRECT MEASURE 4.0MM 1 EA 71173580 2.5MM CANN HEXDRIVER SHAFT - 120MM 1 EA 71173576 1.3MM X 2.7MM DRILL GUIDE 1 EA 71170031 HOLDING SLEEVE 2 EA 71173585 T15 SELF-RET SCREWDRIVER SHAFT 178MM 1 EA 71173544 REVERSE VERBRUGGE 190MM The following clauses & provisions apply to this acquisition: 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (MAY 2014) ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The following clauses are incorporated into 52.212-4 as an addendum to this contract: 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (OCT 2014) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.204-10, Reporting Executive Compensation & First-Tier Subcontract Awards; 52.222-3, Convict Labor (JUNE 2003); 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JAN 2014); 52.222-21, Prohibition of Segregated Facilities (FEB 1999); 52.222-26, Equal Opportunity (MAR 2007); 52.222-36, Affirmative Action for Workers with Disabilities (JUL 2014); 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011); 52.225-3, Buy American Act--Free Trade Agreements--Israeli Trade Act (ii) Alternate I (MAY 2014) of 52.225-3; 52.225-13, Restrictions on Certain Foreign Purchases (JUNE 2008); (End of clause 52.212-5) (End of Clause) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/ 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (DEC 2013) 52.233-1 DISPUTES (MAY 2014) 852.203-70 COMMERCIAL ADVERTISING (JAN 2008) VAAR Clauses 852.203-70 Commercial Advertising (JAN 2008) 852.211-73 Brand Name or Equal (JAN 2008) 852.219-10 VA Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (DEC 2009); 852.246-70 Guarantee (JAN 2008); 852.246-71 Inspection (JAN 2008); 852.273-76 Electronic Invoice Submission (End of Addendum to 52.212-4) FAR Provisions The provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition. Addendum to FAR 52.212-1 -52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998): http://www.acquisition.gov/far/index.html (FAR) and http://www.va.gov/oal/library/vaar/ 52.211-6 Brand Name or Equal (AUG 1999) VAAR Provisions 852.273-74 Award Without Exchanges (JAN 2003) (End of Addendum to 52.212-1) 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL ITEMS (OCT 2014) (End of Provision)

Y--Relocate Specialty & Eye Clinic

Department of Veterans Affairs, VA Rocky Mountain Consolidated Contracting Center | Published October 8, 2015  -  Deadline November 23, 2015
cpvs

THIS IS A PRESOLICIATION NOTICE - A REQUEST FOR PROPOSAL WILL BE POSTED ON OR ABOUT October 23, 2015 Relocate Specialty & Eye Clinic, Cheyenne, WY VA259-16-R-0003 The Cheyenne Veteran Affairs Medical Center (VAMC) in Cheyenne, WY has a requirement to Relocate Specialty & Eye Clinic: Work includes general construction, alterations, mechanical and electrical work, interior finishes, necessary removal of existing structures and construction and certain other items. Work shall occur in three phases: Phase 1: Removal of carpet and replacement with resilient flooring material, and repainting of walls in 7 offices & reinstallation of lavatories in 2 offices to allow relocation of optometry workspace: 1,049 sf., Phase 2: Renovation of walls, floors and ceiling, power, data, HVAC for ophthalmology screening rooms: 174 sf. and Phase 3: Removal of carpet and replacement with resilient flooring materials, and repainting of walls in 7 offices, & reinstallation of lavatories in 7 offices, installation of 68 lin. ft. of plastic laminate & solid surfacing casework in 10 exam rooms, replacement of 15 window treatments, and modification of 3 full bathrooms (toilet, lav. & tub) into ADA-compliant restrooms with all ceramic tile walls and floors replaced with finishes. The NAICS code for this procurement is 236220 with a small business size standard of $36.5M. The magnitude of this project is between $250,000 and $500,000. This project will be 100% set-aside for Service-Disabled Veteran-Owned Small Businesses, as stated below. The POC for this project will be Joseph Wingfield. He can be contacted at 303-372-7019 or email at joseph.wingfield@va.gov. Important Notice: Apparent successful offerors must apply for and receive verification from the Department of Veteran Affairs Center for Veterans Enterprise (CVE) in accordance with 38 CFR Part 74 and VAAR 819.70 by submission of documentation of Veteran status, ownership and control sufficient to establish appropriate status, offerors must be both VISIBLE and VERIFIED by the Department of Veteran Affairs Center for Veterans Enterprises prior to contract award. Failure to be both VERIFIED by CVE and VISIBLE on VetBiz prior to contract award will result in the offeror's proposal being deemed non-responsive. All offerors are urged to contact the CVE and submit the aforementioned required documents to obtain CVE verification of their SDVOSB status if they have not already done so. 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009) (a) Definition. For the Department of Veterans Affairs, "Service-disabled veteran-owned small business concern": (1) Means a small business concern: (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans (or eligible surviving spouses); (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans (or eligible surviving spouses) or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and (iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov). (2) "Service-disabled veteran" means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (b) General. (1) Offers are solicited only from service-disabled veteran-owned small business concerns. Offers received from concerns that are not service-disabled veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a service-disabled veteran-owned small business concern. (c) Agreement. A service-disabled veteran owned small business concern agrees that in the performance of the contract, in the case of a contract for: (1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible service-disabled veteran-owned small business concerns; (2) Supplies (other than acquisition from a non-manufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible service-disabled veteran-owned small business concerns; (3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns; or (4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern's employees or the employees of other eligible service-disabled veteran-owned small business concerns. (d) A joint venture may be considered a service-disabled veteran owned small business concern if- (1) At least one member of the joint venture is a service-disabled veteran-owned small business concern, and makes the following representations: That it is a service-disabled veteran-owned small business concern, and that it is a small business concern under the North American Industry Classification Systems (NAICS) code assigned to the procurement; (2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement; and (3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation. (4) The joint venture meets the requirements of 13 CFR 125.15(b). (e) Any service-disabled veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program.