Public tenders for industrial in United States

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!
IndustrialUnited States

23 -- MOTORCYCLES

Department of Homeland Security, United States Secret Service (USSS) | Published May 22, 2007  -  Deadline May 30, 2007
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number 117474 is issued as a Request for Quotation (RFQ) through Federal Acquisition Circular 05-06. The NAICS code is 441221 - MOTORCYCLE DEALERS. Overview of Requirement The United States Secret Service (USSS) has a requirement to purchase motorcycle parts and possible accessories shown below (Attachment 1). Motorcycle requirements: Shown Below (Attachment 2). Format for Quote Pricing: the offeror shall provide a total price for the motorcycle and the parts. Contact information: The offeror shall provide the name, title, telephone number, fax number, and email address of the point of contact. The offeror shall provide the nine-digit DUNS and the nine-digit TIN. DUNS is used to verify that the vendor is in CCR and a small business for the NAICS 441221. The Taxpayer Identification Number is necessary for electronic payment. Evaluation Factors The Government intends to award a fixed price contract to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, capability, price and other factors considered. An award may be made to other than the lowest-price proposal received. The proposal will be evaluated on their ability to meet the requirements listed above and Price. It is anticipated that this requirement will be a fixed price contract. All responsible small business sources may submit a quotation which will be considered by the USSS. The following FAR provisions and clauses apply to this acquisition: FAR 25.001 Buy American Act FAR 52.212-1 Instructions to Offerors--Commercial Items FAR 52.212-2 Evaluation--Commercial Items. Award will be based on: 1) price; and 2) the capability of the services offered to meet the above stated salient characteristics FAR 52.212-3 Offerors Representations and Certifications--Commercial Items FAR 52-212-4 Contract Terms and Conditions--Commercial Items FAR 52-212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items **By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the CCR database prior to award, during performance, and through final payment from any award resulting from this solicitation. **These DHS and FAR Provisions and Clauses may be accessed via: http://www.arnet.gov/far/, www.dhs.gov. Requests for copies of FAR Provisions and/or Clauses will not be accepted. Quotations are due by 12:00pm pm EST on Wednesday May 30, 2007.Quotations must include all materials referenced here, and should be sent via email to charles.james@usss.dhs.gov or via fax to 202-406-6801. For additional information or questions regarding this solicitation, contact Charles James at (202) 406-6791. The Government will not be responsible for any costs accrued or incurred by the vendor in response to this solicitation. **Attachment 1 ITEM# 1) Purchase HARLEY DAVIDSON MOTORCYCLE MODEL # FLHTPI (NON ABS). YEAR-2007 POLICE EDITION MOTORCYCLE INCLUDES DELIVERY AND SET-UP Each 3 ITEM# 2) 2007 HARLEY DAVIDSON SIDE-CAR MODEL # TLE. DELIVERED AS ROLLING STOCK Each 3 ITEM# 3)AIR DEFLECTOR KIT MODEL #58120-96A Each 3 ITEM# 4) CHROME WINDSHIELD MOLDING MODEL # 59213-96 Each 3 ITEM# 5) H-D GRIPS MODEL # 56285-98 Each 3 ITEM# 6) FRONT AXLE NUT COVER MODEL # 43063-04 Each 3 ITEM# 7) MIC HANGER BRACKET MODEL # 76272-87A Each 6 ITEM# 8) SPACER MODEL # 5884 Each 12 ITEM# 9) SCREW MODEL # 913 Each 12 ITEM# 10) RUN,BRAKE,TURN SIGNAL CONVERTER MODEL # KA-4861 Each 3 ITEM# 11) POLICE EMERGENCY RES MODEL #91453-00 Each 3 ITEM# 12) EMERGENCY HEADLIGHT MODEL # 90050-02 Each 3 ITEM# 13) PAR 36 LED STROBE LIGHT MODEL # 69250-04 Each 3 ITEM# 14) PAR 36 RED LED MODEL # 668547-04 Each 3 ITEM# 15) PAR 36 BLUE LED MODEL # 68557-04 Each 3 ITEM# 16) PASSING LAMP, DOM MODEL # 68671-69D Each 6 ITEM# 17) 3 PIECE CLAMP, 1-1/4" MODEL # 50903-85T Each 6 ITEM# 18) RED, BLUE, R/B LED MODEL # 67650-04 Each 3 ITEM# 19) POLICE TOURPACK, BLACK MODEL # 53631-04 Each 3 ITEM# 20) BATTERY-MF HD OEM 19AH MODEL # 65989-97A Each 3 ITEM# 21) HARNESS, TWO INTO ONE ADAPTER MODEL # 70264-94A Each 3 **Attachment 2 Justification/Specifications Motorcycles for the Uniformed Division These specifications are intended to describe the mechanical, safety and comfort requirements for solo, certified traffic enforcement motorcycles which will be used by the U.S. Secret Service, Presidential Protective Division, Special Programs Branch to provide motorcade escorts during all types of weather to include rain and snow. With this in mind, a sidecar (factory equipped) will provide the necessary stability/safety needed. A. Motorcycle Specifications: 1. Engine - Shall be not less than two (2) cylinders with a minimum piston displacement of not less than 103cubic inches . Engine shall be designed to ensure that any vibration frequencies and magnitudes shall be minimal. Engine and transmission isolated from motorcycle frame through a rubber mounting system. Shall be overhead valve, equipped with hydraulic lifters and fuel injected. 2. Electrical System ? The electrical system shall be nominal twelve (12) volt complying with the following: a. Battery ? Sealed, heavy duty maintenance free, center mounted battery required. Twelve (12) volts, minimum rated capacity ? 28 ampere hours per Battery Council International (BCI) rating, cold cranking amps. b. Ignition ? Non-waste spark, alpha control c. Charging System ? forty-five (45) amp high output alternator and voltage regulator. d. Connections ? Industrial grade throughout; an electrical accessory connection shall be provided. e. Hand Controls ? Water resistant switches shall be provided. f. Starting System ? Twelve (12) volt starter with solenoid operated engagement and relay required. g. Horn ? Horn that will emit a sound level adequate to be heard above motorcycle and traffic generated noise level required. h. Lighting ? Each motorcycle shall be provided with the following lighting equipment: 1. Quartz Halogen Headlight. 2. Pursuit lamps front mounted PAR-36 lamps one red, one blue (incandescent). Front Engine Guard Lights need to both be Blue. 3. Taillight. 4. Turn Signals (self canceling) 5. Flashers, four way, integrated into turn signal switches I. Cooling Fan- Engine shall be equipped with a thermostatically activated fan Mounted on the left side of the engine next to the cylinders that Provides a constant air flow providing adequate cooling when the Motorcycle is running and not in motion. 3. Clutch ? Left hand operated, multiple disc, wet plate clutch capable of offering slip control when motorcycle is operating at low speeds for prolonged periods. Requires clutch disengaged for starter motor operation; low effort hand levers. 4. Transmission ? Shall be six (6) forward speeds of the constant mesh design with the shift lever mounted on the left side of the engine and extending upward to be easily accessible to the operators left foot. Greaseless shifter shaft with ?antivibration? rubber spacers. 5. Brakes ? Disc brakes shall be provided for both front and rear wheels. Front brakes shall have dual 11.5-inch diameter drilled discs; rear brake shall be single disc. Brakes shall be relatively free from heat fade, have four (4) piston calipers and uniform expanded rotors. Rear brake must have the capability of attaching to the hydraulic brake incorporated in the sidecar. 6. Frame ? Shall be reinforced double loop, trussed and welded, engineered for sidecar use, (unitized body not accepted). Minimum wheelbase of sixty-three (63) inches. 7. Suspension ? Shall be ?heavy duty? (front and rear); with the ability to adjust rear ride height to compensate for imposed loads. The rear suspension shall have swing arms having bearings that require no lubrication for life of the motorcycle. This shall be engineered for sidecar usage. 8. Drive Assembly ? Engine to transmission by automatically lubricated ?? pitch double row chain. Transmission to rear wheel (final drive) shall be belt drive. 9. Visual Displays ? Shall have a speedometer certified analog to indicate 0-120 mph, odometer, tachometer, fuel level gauge, pursuit lamp indicator, sight glass on brake master cylinder and a low fuel indicator lamp. 10. Oil and Fuel Capacity ? Gas tank capacity shall be a minimum of five (5) gallons and must include a reserve feature. Oil reservoir shall hold a minimum of four (4) quarts. 11. Wheels/Tires - Shall have cast wheels with a rim material impermeable to compressed air. Sealed automotive style wheel bearings requiring no end play adjustment and service interval of 100,000 miles. Tubeless type tires to have a non skid tread, designed to operate on paved highways and shall have a full four-ply fabric reinforcement, size MT90X16?, front and rear with a bead retention design to remain on wheel during sudden loss of air pressure. 12. Sidecar Connection - Shall be equipped with sidecar attaching brackets to accommodate sidecar. 13. Feature Requirements - a. Seat ? Leather or equal durable material, foam rubber padded, single saddle type with adjustable air bladder. b. Jiffy Stand ? Shall be designed that if holdback spring is lost or broken, contact with the roadway will tend spring it aside and not serve as a lever for throwing the operator. c. Foot boards ? Adjustable and provided with non-skid rubber pads on upper surfaces. d. Engine Guards - Front engine guard, sturdy rear saddlebag guards. e. Saddlebags ? Factory installed, law enforcement type fiberglass saddlebag. Bags shall be nominally waterproof, utilizes police style speed latches. f. Fairing and Windshield ? Fork mounted fairing with windshield; windshield shall be of latest design, utilizing Lexan or clear polycarbonate. g. Mirrors ? Two (2) true image mirrors shall be provided for each motorcycle. h. Key(s) ? One key fits all locks. i. Warranty ? Twenty-four (24) months, unlimited mileage. j. Quart Clock-Needs to be installed on the left side of Fairing underneath Fuel Guage k. P.A PLUG-IN-Needs to be installed on Right Side of Fairing underneath Volt Guage. B. Sidecar Specifications 1. Body ? Molded fiberglass, smooth gel coat finish 2. Frame ? Tube Steel with attachment hardware for mounting to motorcycle as listed in section A, above. 3. Suspension ? Leaf Spring 4. Brakes ? Hydraulic Disc. 5. Wheels/Tires ? Shall be size MT90X16?, wheel to match motorcycle as listed in section A, above. 6. Electrical ? Twelve (12) volt signal light, tail/stop light and fender tip light 7. Bumper ? Poly-Fab, capable of protecting the rear portion of sidecar and displaying 5? high reflective letters ?POLICE?. C. Radio/LED Light Specifications- - Blue Lights only on Engine Guards Red Light Right Rear Radio Box Blue Light Left Rear Radio Box

99 -- Information Technology Industry Council

Other Defense Agencies, National Geospatial-Intelligence Agency | Published May 22, 2007  -  Deadline June 6, 2007
cpvs

The National Geospatial-Intelligence Agency (NGA) intends to negotiate and award on a sole source basis in accordance with FAR 6.302-1 to Information Technology Industry Council (ITIC), 1250 Eye Street, NW, Washington, DC. ITI will provide limited use standards licenses. ITI will provide 50 standards identified by NGA within the licensing activity. These standards specify, for geographic information, methods, tools and services for data management (including definition and description), acquiring, processing, analyzing, accessing, presenting and transferring such data in digital/electronic form between different users, systems and locations. The standards increase the understanding and usage of geographic information; increase the availability, access, integration, and sharing of geographic information; and promote the efficient, effective, and economic use of digital geographic information and associated hardware and software systems. The InterNational Committee for Information Technology Standards (INCITS), being accredited by ANSI, is the sole source for United States adopted Geospatial ISO Standards. Interested parties have fifteen (15) days from the date of publication of this Synopsis to submit in writing to the identified point of contact (POC) clear and convincing evidence of their qualifications and/or capabilities. Such qualifications and/or capabilities will be used solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. Responses received after fifteen (15) days or without required information will be considered non-responsive to this Synopsis and will not be considered. A determination by the Government to either conduct or not conduct this effort as a full and open competitive procurement, based upon responses to this notice, is solely within the discretion of the Government. All inquiries will only be accepted by email. Email Christina.C.Griffin@nga.mil or contact Christina Griffin at 703-814-4569 for additional information.

Z -- Penthouse AHU Replacement-Federal Building/US Courthouse, Peoria, IL

General Services Administration, Public Buildings Service (PBS) | Published May 24, 2007  -  Deadline July 24, 2007
cpvs

The following work will be performed at the Federal Building/US Courthouse, 100 N.E. Monroe, Peoria, Illinois. The scope of work consists of but is not strictly limited to, furnishing all labor; material and equipment necessary to replace the existing three penthouse air handling units with new energy efficient air handling units. Upgrade the existing EMS System as required to tie the entire system together with a single point of entry controller. Replace existing high velocity ductwork and induction units with a new supply and return air ductwork system to ensure 100% outside air to all interior 2nd and 3rd floor spaces. Install new fire and smoke dampers where required by code. Work will be accomplished in phases. The estimated cost range for all work is between $1.5 million and $2 million. This procurement is being procured on an unrestricted basis in accordance with the Small Business Competitiveness Demonstration Program. The North American Industrial Classification Code(NAICS) is 238220 with a size standard of $13million. This is a negotiated procurement; there will NOT be a public bid opening. The solicitation will be available on or about June 8, 2007. The solicitation cited above can only be obtained by accessing a secure website known as the Federal Technical Data Solution (FedTeDS). FedTeDS is a secure website designed to safeguard sensitive but unclassified (SBU) acquisition information. In order to obtain information from FedTeDS, you will first be required to register with CCR(Central Contractor?s Registration) database. You may access CCR at the following URL, www.bpn.gov. Once you register with CCR you will be required to register with FedTeDS. No federal materials can be downloaded until you have registered under both sites. You may access FedTeDS via the following URL, www.FedTeDS.gov. Also, beginning January 1, 2005, as required by the Federal Acquisition Regulations (FAR) all vendors will be required to use the Online Representations and Certifications Application (ORCA) in federal solicitations as a part of the proposal submission. You may access ORCA via the following URL, www.orca.bpn.gov. Potential offerors should refer to the solicitation package regarding instructions involving the use of ORCA. Potential offerors will be responsible for downloading the solicitation and monitoring the website for amendment(s), if any to the solicitation. Offer due date and time for receipt of proposals will be on or about July 24, 2007 at 3:00pm(CST) All offers are to be submitted to General Services Administration, Attn: Debbie Ethell, 520 South 8th Street, Springfield, Illinois 62703. Any questions regarding this notification should be directed to the Contracting Officer whose name appears herein.

28--ENGINES, TURBINES, AND COMPONENTS. FACILITY MANAGEMENT.

Department of the Army, U. S. Army Materiel Command | Published May 25, 2007  -  Deadline July 20, 2007
cpvs

THIS SOLICITATION IS TO PROVIDE A FIVE (5) YEAR FACILITY CONTRACT FOR INDUSTRIAL PLANT EQUIPMENT (IPE) AND OTHER PLANT EQUIPMENT (OPE) LOCATED AT ANNISTON ARMY DEPOT (ANAD), BUILDING 134, ANNISTON, AL. BUILDING 134 IS A GOVERNMENT-OWNED CONTRACTOR-OPERATED (GOCO) FACILITY, WHICH MANUFACTURES RECUPERATOR COMPONENTS FOR THE AGT 1500 ENGINE FOR THE M1 TANK. UNDER THIS PROPOSED CONTRACT, THE CONTRACTOR WILL BE RESPONSIBLE FOR THE GOVERNMENT FURNISHED OPE AND IPE INSIDE A GOCO PROVIDED FACILITY. THE SERVICES TO BE PROVIDED BY CONTRACTOR MAY INCLUDE, BUT ARE NOT LIMITED TO THE ACQUISITION, INSTALLATION, MAINTENANCE, REPAIR, REPLACEMENT, REHABILITATION, PRESERVATION PROTECTION, SURVEILLANCE, ACCOUNTABILITY AND DISPOSITION OF GOVERNMENT-OWNED FACILITIES AND EQUIPMENT. THIS PROPOSED CONTRACT WILL BE ENTERED INTO FOR A PERIOD OF FIVE (5) YEARS AT AN ESTIMATED TOTAL AMOUNT OF $6.5 MILLION DOLLARS. THIS IS A SOLE-SOURCE PROCUREMENT WITH HONEYWELL INTERNATIONAL INC. THIS SOLICI! TATION IS RESTRICTED HONEYWELL INTERNATIONAL INC. SOLICITATION RESPONSE DATE IS ON OR AROUND 20 JULY 2007, CHECK THE SOLICITATION FOR ACTUAL CLOSING DATE.

D -- Electronic Payment

Department of the Treasury, Internal Revenue Service (IRS) | Published May 29, 2007
cpvs

The Department of the Treasury, Internal Revenue Service (IRS) has a requirement fora contractor(s) to provide an electronic payment product that allows taxpayers to make federal tax payments through convenient, safe and secure means and to collect the appropriate services fees from the taxpayer to cover all costs incurred to deliver the services requested by the U.S. Government. The IRS anticipates the award of multiple $0.00 dollar contracts to commence November 11, 2007 or filing season 2008 electronic payment services. This acquisition will be conducted as a full and open competition, 8(a) Set Aside and Small Business Set-Aside. The North American Industrial Classification System (NA ICS) Code for this acquisition is 522320. The small business size standard pertaining to the NAIC Code is $6.5 million. Contract(s) will consist of one base year with four one-year optional renewal periods of performance. All responsible vendors may submit a proposal, which will be considered by the agency. The required services have been determined to meet the definition of commercial items in accordance with Part 2.101 of the Federal Acquisition Regulation (FAR). Resultant contracts are expected to have a contract term of not more than five years, to encompass a one year base period, and four (4) one year option periods. Pursuant to the Taxpayer Relief Act of 1997 (IRC 6311(d) (2), the Secretary of the Treasury is authorized to enter into contracts to obtain services related to receiving payment by other means where cost beneficial to the Government. The Secretary may not provide any fee or provide any other consideration under such contracts. No U.S. Government appropriated or non-appropriated funds will be made available or utilized in performance of the resultant contracts. The taxpayer will be responsible for paying the Contractor directly for the services rendered. The solicitation document will be posted on the Internet at http://www.procurement.irs.treas.gov approximately fifteen days after the publication date of this synopsis. Please reference Solicitation Number TIRNO-07-R-00004. Copies of the solicitation can only be obtained from the Internet address listed above. All relevant information regarding proposal preparation and submission will be included in the solicitation document. No telephonic inquiries will be accepted.

70--Data Storage and Analysis Product

Department of the Army, Army Contracting Agency, South Region | Published May 29, 2007  -  Deadline June 18, 2007
cpvs

Solicitation Number: W9124R-07-T-1074 Technical Questions/Comments: 05 June 2007, 12:00 PM MST Response Date: 18 June 2007, 12:00 PM MST This a combined synopsis/solicitation for commercial services prepared in accordance with the format in the Federal Acquisition Regulation (FAR) PART 12 Acquisition of Commercial Items and Part 13 Simplified Acquisition Procedures, as supplemented with add itional information included in this notice. The incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-16, Effective 22 Mar 2007 Class Deviation 2005-o0001 and Defense Federal Acquisition Regulation Supple ment (DFARs) current to DCN 20070426 edition. This announcement constitutes the only solicitation, quotes are being requested and a written solicitation will not be issued. This acquisition is a 100% small business set-aside. The North American Industrial Classification Code (NAICS) applicable to this acquisition is 511210 with a size standard of $23M. All prospective offerors must be actively registered in the Central Contractor Registration. Offerors may register online at https://www.ccr.dlis.dla.mil/cc r/scripts/index.html Quotes are being solicited for the following item: Contract Line Item Number (CLIN) 0001, Quantity: 1, Unit of Issue: Each, Description: Data Storage and Analysis Product The resultant contract will be firm fixed price. See website http://www.yuma.army.mil/contracting/index.html for specifications and evaluation criteria. Offerors are required to submit adequate information to demonstrate that the product offered meets or e xceeds all requirements of the specifications. All quotes shall include shipping costs to U.S. Army Yuma Proving Ground, Yuma, AZ 85365. All quotes shall be clearly marked with solicitation #W9124R-07-T-1074 and emailed to the point of contact listed below or sent by facsimile to (928) 328-6849 no later than 18 June 2007, 12:00 PM MST. The Government intends to award a contract to the responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government based on tech nical capability, past performance and price. Award will be made on a best value basis and the Government reserves the right to award to other than the low offeror. FAR 52.212-2 is completed as follows: i) Technical Capability, ii) Past Performance, and ii i) Price. Technical Capability and Past Performance are significantly more important than price. Proposals with unreasonable prices will not be considered for technical evaluations. Price will then be evaluated for offerors whose technical proposals have been determined acceptable. Unreasonable prices or a history of poor performance can make the most meritorious technical proposal not the best value. Offerors shall include in their proposal, past performance information on at least three other contracts i n which they provided same or similar services. Past performance information shall include the following: 1) Contract Number, 2) Company/Agency Name and Address, 3) Point of Contact (Name) with Phone Number and Email Address and 4) Brief Synopsis of projec t to include price. Offers that fail to furnish required representations or technical information as required by FAR Clause 52.212-1 cited below or reject the terms and conditions of this solicitation may be excluded from consideration. The following FAR Clauses and Provisio ns are incorporated by reference and apply to this acquisition. FAR provision 52.212-1 Instructions to Offerors Commercial Items (Sep 2006). An offeror shall complete only paragraph (k) of FAR 52.212-3 if the offeror has completed the annual representation s and certifications electronically at the Online Representations and Certifications Application (ORCA) web site at http://orca.bpn.gov NOTE: in order to complete the Representation and Certifications for the following referenced provisions you must go to the Air Force Web Site at http://farsite.hill.af .mil/Vffar1.htm, locate the reference clause, copy and paste it to a Word document and complete FAR provision 52.212-3 Offeror Representations and Certifications Commercial Items (Nov 2006) Alternate I (Apr 2002) and DFARS 252.212-7000 Offeror Representati ons and Certifications Commercial Items (Jun 2005) apply to this acquisition. FAR 52.212-4 Contract Terms and Conditions Commercial Items (Feb 2007) and specifically addendum of 52.247-34 FOB Destination (Nov 1991). FAR 52.212-5 Contract Terms and Conditio ns required to Implement Statues or Executive Order Commercial Items (Mar 2007) apply to this acquisition. Specific clauses cited in FAR 52.212-5 that are applicable to this acquisition are 52.203-6 Restrictions on Subcontractor Sales to the Government (Se p 2006), 52.219-6 Notice of Total Small Business Set-Aside (June 2003), 52.219-8 Utilization of Small Business Concerns (May 2004), 52.219-14 Limitations on Subcontracting (Dec 1996), 52.222-3 Convict Labor (Jun 2003), 52.222-19 Child Labor Cooperation wit h Authorities and Remedies (Jan 2006), 52.222-21 Prohibition of Segregated Facilities (Feb 1999), 52.222-26 Equal Opportunity (Mar 2007), 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (S ep 2006) 52.222-36 Affirmative Action for Workers with Disabilities (June 1998), 52.222-37 Employments Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sep 2006) 52.232-33 Payment by Electronic Funds Transfer Central Contractor Registration (Oct 2003), FAR 52.203.3 Gratuities (Apr 1984), DFARS Clause 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items (Apr 2007) ap plies to this Acquisition, and specifically 252.205-7000, Provisions of Information to Cooperative Agreement Holders (Dec 1991), 252.225-7001 Buy American Act Trade Agreements Balance of Payments Program (Jun 2005), 252.225-7012 Preference for Certain Dom estic Commodities (Jan 2007), and 252.232-7003 Electronic Submission of Payment Requests (Mar 2007). If you plan on participating in this acquisition you are required to provide your name, address, phone number, and email address to the point of contact l isted below or facsimile (928) 328-6849 for notification of amendments.

16--The Government has a requirement for a commercial-off-the-shelf or modified commercial hardware solution to the requirements of GPS Message Router performance specification. Solicitation Number W58RGZ07R0476 is cancelled due to computer error.

Department of the Army, U. S. Army Materiel Command | Published May 30, 2007  -  Deadline June 8, 2007
cpvs

The GMR will have internal GPS capability, si x (6) Ethernet IEEE 802.3 10/100 base T interface ports, three high speed, multi-protocol serial interface ports serial ports (EIA-232 or EIA-422 synchronous or asynchronous serial communication), at leas t one 480 Mbps USB (USB 2.0) port and will meet mili tary environmental requirements. The GMR will provide the interface between the Air Warrior computer (EDM) and the Aircraft mounted GPS antenna and the Blue Force Tracking (BFT) transceiver. This effort will be accomplished in two phases. In the first phase, based upon full and open competition, firm-fixed price contract(s) not to exceed $300,000 will be awarded to a maximum of two offerors for the delivery of four (4) production rep resentat ive hardware samples and functional demonstration software. The intent of Phase I is to promote competition through the delivery and initial Government evaluation of actual product samples. Competition for this effort will be limited to contra ctors who sa tisfy the following three requirements: -- Contractor must be Free from Foreign Ownership, Control and Influence (FOCI). --Contractor must have a facility clearance of SECRET or higher in accordance with DoD 5220.22-M, National Industrial Secu rity Program Operating Manual (NISPOM). --Contractor is required to have a COMSEC account established by the US Government. This requirement is specified in DoD 5220.22A, Communications (COMSEC) Security Annex. The Phase II procurement is for a 5-yea r IDIQ production contract that will be limited to the offeror(s) selected for the Phase I effort. The estimated total lifetime hardware purchases from the Phase II contract is 6,000 units. The Government will relea se a Phase II RFP with a product ion statement of work to the selected offeror(s) approximately 45-60 day prior to the specified delivery date for the Phase I hardware samples. Offeror(s) shall submit their Phase II proposal concurrently with the delivery of their four GMR hardware sa mples required as deliverables for Phase I. The Phase II RFP will require the offeror to provide pricing data to perform the production statement of work and provide GMR unit price data. The contractor with the lowest price a nd technically accepta ble hardware, as determined through the performance of limited Government acceptance testing, will be awarded the Phase II production contract. The release of the Phase I RFP is anticipated on or about 15 May 07.

75--ESTABLISH BLANKET PURCHASE AGREEMENTS TO SUPPLY THE NIST STOREROOM

Department of Commerce, National Institute of Standards and Technology (NIST) | Published May 31, 2007  -  Deadline June 20, 2007
cpvs

The National Institute of Standards and Technology (NIST), Storeroom and Warehouse, located on the NIST Campus in Gaithersburg, MD, has a requirement to establish Blanket Purchase Agreements (BPAs) to supply the Storeroom with office supplies on an as-needed basis. The NIST Storeroom and Warehouse is an 11,500 square foot facility, with a 2,700 square foot sales floor, located in Building 301 on the NIST Campus in Gaithersburg, MD. The Storeroom is a part of the NIST Administrative Services Division, Logistics Storeroom Section. Their mission is to service customers better than anyone else could serve them and provide customers the highest quality, variety and convenience. The Storeroom also maintains an on-line catalog to provide NIST personnel with current information on items available. The commodity being procured is Office Supplies. This acquisition will create a maximum of two(2) Blanket Purchase Agreements (BPAs). The period of performance shall be five (5) years from the date of award. Delivery terms shall be FOB DESTINATION. Office supplies, which are classified as commercial items in accordance with FAR Part 12, shall be procured using simplified acquisition procedures under the authority of FAR Part 13.5 Test Program for Certain Commercial Items. The associated North American Industrial Classification System (NAICS) code for this procurement is 424120 Stationery and Office Supply Merchant Wholesalers, with a small business size standard of 100 employees. This acquisition is 100% set-aside for Service-Disabled Veteran-Owned (SDVO) Businesses. All responsible SDVO businesses may submit a quotation. The competitive Request for Quotation (RFQ), RFQ amendments, and all questions and answers related to this procurement will be made available via the Internet at http://www.fedbizopps.gov/ under RFQ number SB1341-07-RQ-0241. THE RFQ IS ANTICIPATED FOR RELEASE TO THE VENDOR COMMUNITY ON OR ABOUT JUNE 13, 2007, AND WILL ONLY BE AVAILABLE VIA THE INTERNET AT THE ABOVE WEB SITE. A SITE VISIT WILL BE CONDUCTED FOR THIS REQUIREMENT. SITE VISIT DETAILS SHALL BE PROVIDED IN THE SOLICITATION. POTENTIAL OFFERORS ARE RESPONSIBLE FOR ACCESSING THE WEB SITE. Interested parties must respond to the RFQ in order to be considered for award of any resultant BPA. THERE IS NO WRITTEN SOLICITATION DOCUMENT AVAILABLE, TELEPHONE REQUESTS WILL NOT BE HONORED, AND NO BIDDERS LIST WILL BE MAINTAINED. Potential offerors are requested to direct all questions via email to Carol.Wood@NIST.GOV.

S -- Galley/ Food Services for NAS JRB Ft. Worth

Department of the Navy, Naval Supply Systems Command | Published May 31, 2007  -  Deadline June 10, 2007
cpvs

The Fleet and Industrial Supply Center, Jacksonville, FL intends to procure on a firm-fixed price full food services/ galley operation services for the Naval Air Station Joint Reserve Base Ft. Worth, TX. The period of performance begins 1 October 2007 through 30 September 2008, with four one-year option periods. The NAICS code is 722310. This is a 100% HubZone set aside procurement. A solicitation will be posted to FedBizOpps on or about 10 June 2007. The deadline for the receipt of responses will be identified on the actual solicitation. The procurement is being conducted under FAR 13.5 Commercial Item Test Program. Numbered note #27 applies. Please address all questions to Laura Maxwell by e-mail at laura.maxwell@navy.mil.

T -- Geographic Information System Services

Department of the Navy, Naval Supply Systems Command | Published June 1, 2007  -  Deadline July 2, 2007
cpvs

In support of NAVFAC Northwest, the Fleet & Industrial Supply Center, Puget Sound (FISCPS) is soliciting for the following services: Geographic Information System (GIS) base mapping services. This acquisition is set-aside 100% for small businesses under NAICS 541370. The procedures of FAR Part 15 contracting by negotiation will be utilized. The period of performance is approximately from 10 Sept 2007 through 09 Sept 2008 for a base year and four option years. FOB Destination. This notice of intent is not a request for competitive proposals. This solicitation will be issued on or about 15 Jun 2007. All responsible sources may submit a bid, proposal or quotation which shall be considered by FISCPS. This solicitation and any subsequent amendments will be posted to the NECO website: http://www.neco.navy.mil. Prospective offerors are responsible for downloading their own copy of the solicitation from this website and for frequently monitoring that site for any amendments. The Government is not responsible for any inability of the offeror to access the posted documents. No telephone or FAX requests will be accepted, and no hard-copy solicitation/amendment will be mailed or FAXed. Electronic submission of proposals/quotes is acceptable.

43 -- Oil Free Reciprocating Air Compressor

Department of the Navy, Naval Air Systems Command | Published June 5, 2007  -  Deadline June 21, 2007
cpvs

The Naval Warfare Center Aircraft Division Lakehurst intends to solicit and negotiate a Firm Fixed Price contract with Rix Industries for the purchase of 3 each Oil Free Reciprocating Air Compressors. This compressor is capable of maintaining a cyclincal air flow of 3.7 lbs/min minimum and 10 lbs/min maximum at a pressure range of 55 to 90 psig. The compressor must be an oil-free reciprocating air compressor, capable of operating in temperature extremes from -25 degrees F to 120 degrees F, and sustainable stowage temperature from -40 degrees F to 140 degrees F. The item has been modified for use with the RR04 Mobile Maintenance Facility, and has been tested, verified, and validated for use with the aircraft in the fleet environment, and compatibility with other Peculiar Support Equipment (PSE). The Government intends to procure this equipment on a sole source basis from Rix Industries under the authority of 10 USC 2304(c)(1) as implemented by the Federal Acquisition Regulation (FAR) Section 6.302-1. However, the Government will consider all responses received within 15 days after the publication of this synopsis. A determination by the Government not to open this requirement to competition based upon responses to this notice is solely within the discretion of the Government. Information received as a result of this notice of intent will be considered solely for the purpose of determining whether to conduct a competitive procurement. Rix Industrial owns the technical drawings, specifications, and data rights for the compressor.

84 -- Parka, ECWCS, Generation II

Defense Logistics Agency, Acquisition Management | Published June 5, 2007  -  Deadline July 5, 2007
cpvs

This requirement is for the following: - Parkas ECWCS Generation II, Universal Camouflage, NSN 8415-01-526-9168(s). The base year is for a Minimum of 75,000; AEQ 400,000 and a Maximum of 500,000. There will be two (2) one-year term options included in this requirement with the same minimums and maximums. The Parkas will be FOB Destination to New Cumberland and Tracy, CA. Inspection and Acceptance will be at Origin. Applicable specifications for the Parka, Generation II is MIL-DTL-32184. Production lead time is 120 days after award. Solicitation Numbers: SPM1C1-07-R-0149, SPM1C1-07-R-0150, and SPM1C1-07-R-0151 are set-aside exclusively for Small Business concerns. Three separate solicitations will be issued and separate best value determinations will be made for each solicitation. This requirement will be split into three solicitations as follows: -Solicitation SPM1C1-07-R-0149 will be a total small business set aside and will represent 50% of the total requirement. -Solicitation SPM1C1-07-R-0050 will be a total small business set aside and will represent 25% of the total requirement. -Solicitation SPM1C1-07-R-0051 will be a total small business set aside and will represent the last 25% of the total requirement. Small businesses are allowed to offer on all solicitations. However, in order to maintain alternative sources in accordance with FAR 6.202, the same successful small business cannot receive more than one award. Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. This solicitation will be issued on or after 07/05/07. Numbered notes 2, 9, 13 and 26 apply. Technical factors to be used will be as follows (in descending order of importance): 1. Product Demonstration Model 2. Experience/ Past Performance 3. Industrial Mobilization (Surge Capacity) 4. DLA Mentoring Business Agreement * Technical merit is more important than price Solicitations will be posted on https://www.dibbs.bsm.dla.mil/ Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include: 1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the Central Contractor Registration (CCR) system. 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their CCR registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as ?The Berry Amendment?) impose restrictions on the DoD?s acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and ?specialty metals? (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. DSCP has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for DSCP Clothing and Textiles (DSCP C&T) solicitations, use the following link to the DSCP C&T Technical Data Repository area at https://ctportal.dscp.dla.mil/pls/portal/CUSTOM_DSCP_APP.CTSREQ_DYN_PATTERN.show or https://warfighter.dla.milnewmenu/Index.jsp Any problems with this web site contact via email: warfighter@dla.mil All other related military specifications/documents are available through the following site: http://assist.daps.dla.mil/quicksearch ______________________________________________________________________________________________________________________________________________________________________________________________________ Arnetta L. Hobbs is the Contracting Officer and secondary point of contact. You may reach her at 215-737-2044.

M--Management and Operation of the National Renewable Energy Laboratory

Department of Energy, Federal Locations | Published June 6, 2007
cpvs

Department of Energy to Compete Management & Operating Contract for its National Renewable Energy Laboratory (Note: This is for informational purposes only and is not the formal RFP. This site will be updated when the RFP is relesed.) WASHINGTON, DC – The U.S. Department of Energy (DOE) today announced that it will compete the management and operating (M&O) contract for its National Renewable Energy Laboratory (NREL) in Golden, Colorado, the nation’s primary laboratory for clean energy research. The competition reflects DOE’s commitment to regularly compete its M&O contracts for DOE national laboratories to ensure the greatest possible benefit to DOE, its mission and this Nation. The current contract, which expires on November 8, 2008, was last competed in 1998. “NREL’s work, including research and development supporting President Bush’s Advanced Energy Initiative, is vitally important to increasing our nation’s energy security,” DOE Assistant Secretary for Energy Efficiency and Renewable Energy Alexander A. Karsner said “Holding competitions for the management and operation of our world class national labs ensures that we have the best team managing the work and provides the best value for taxpayer dollars.” NREL conducts research, development, and deployment (RD&D) in alternative energy areas such as converting sunlight to electricity, generating electricity from wind, producing fuels and high-value industrial products from biomass, and producing and storing hydrogen fuel generated from renewable feedstocks. In addition to its RD&D activities, NREL, a Federally Funded Research and Development Center, provides DOE expert counsel on the scope and direction of DOE’s alternative energy and energy efficiency programs. Established in 1977 as the Solar Energy Research Institute, NREL was renamed in 1991 to reflect its expanded mission and importance. NREL has a staff of more than 1,000 and an annual budget of approximately $220 million. NREL is currently managed by the Midwest Research Institute (MRI), a not-for-profit research institution headquartered in Kansas City, Missouri. More information about this competition will be posted, when appropriate, on Federal Business Opportunities website and on the DOE Industry Interactive Procurement System website.

Z--Range and Base Operations Support Services for Pacific Missile Range Facility (PMRF), Barking Sands, Kauai, Hawaii

Department of the Navy, Naval Supply Systems Command | Published June 8, 2007  -  Deadline June 29, 2007
cpvs

Fleet and Industrial Supply Center, Pearl Harbor, Regional Contracting Department is soliciting comments on the DRAFT performance work statement (PWS) to assist in enhancing competition for the forthcoming solicitation. The DRAFT PWS is not complete and additional information will be incorporated into the final PWS at the time of Request for Proposal. The Government seeks industry comments to improve the technical specifications. This announcement is not a solicitation and should not be construed as a commitment by the Government. Please DO NOT submit your proposal or proprietary information. At this time, FISC Pearl Harbor requests that potential proposers review the DRAFT PWS and provide comments and suggestions. Those deemed acceptable will be incorporated into the final PWS. The overall requirement of this contract is to provide full range and base operations and maintenance and support services for the Pacific Missile Range Facility (PMRF), Barking Sands, K! auai, Hawaii. Facilities operating under the PMRF are located at the following sites: Barking Sands, Makaha Ridge, Kokee Park, Port Allen, Kamokala Ridge, Niihau and Kaula Island. PMRF also supports limited activities on Oahu at Mauna Kapu, Mt. Kaala, and Kalaeloa (Barber�s Point). PMRF also supports Fleet activities occurring in waters surrounding Maui and the Pohakuloa Training Area on the Big Island. PMRF also provides operation and maintenance services to a number of tenant activities. This is a follow-on effort to Contract N00604-98-C-0031. Range Operations Services to be performed may include and are not limited to: (1) Range programs management and operations; (2) IT/Communications support; (3) Operation and maintenance of Launch/Ordnance facilities and systems, measurement systems, tracking radar, surveillance radar, telemetry systems, underwater tracking systems, and aerial targets; (4) Electronic warfare systems support; and (5) Calibration of measuring and ! test equipment. Base operations services to be performed may include and are not limited to: (1) Billeting; (2) Food services support; (3) Crash/fire; (4) Emergency medical; (5) Security services; (6)Grounds maintenance; (7) Solid waste collection; (8) Transportation operation and maintenance; (9) Maintenance/repair of buildings and structures; (10) Pest control; (11) Fuel storage distribution and aircraft refueling; (12) Supply and logistics support; and (13) Airfield services. Facility clearance up to Top Secret is required. A combination Fixed Priced Award Fee (FPAF) with Indefinite-Delivery Indefinite-Quantity (IDIQ) provisions, and Cost-plus Award Fee (CPAF) with IDIQ provisions contract is anticipated. The period of performance is expected to include a 12-month base year (which includes a 3-month transition period) and 9 one-year option periods. The contract will contain FAR Clause 52.237-3, Continuity of Services to allow for continuation of services for up to 90 days after expiration of the contract. The North American Industry C! lassification System (NAICS) Code is 561210 for Facilities Support Services that has an applicable size standard of $32.5 million. Due to present market information, this requirement will be offered to the Small Business Administration as a competitive 8(a) set-aside. A pre-proposal conference and site visit will be held at the Pacific Missile Range Facility on Kauai, Hawaii a few weeks after the release of the solicitation. The pre-proposal conference and site visit is expected to span three days. Details will be provided in the solicitation. A separate notice announcing the solicitation will be issued. The solicitation is expected to be issued in July 2007. Proposals will be due approximately three months later. Please use the attached form to submit your comments and suggestions. You may submit your form to: FISC_PRLH_DistributionClerk@navy.mil. Comments are due by 2:00 pm (HST) on 29 June 2007. *** NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS ANNOUNCEMENT AND ANY FOLLOW-UP INFORMATION REQUESTS.*** Submittals furnished will not be returned to the sender.

59--Electrical Supplies

Department of Commerce, National Institute of Standards and Technology (NIST) | Published June 12, 2007  -  Deadline June 22, 2007
cpvs

The National Institute of Standards and Technology (NIST), Storeroom and Warehouse, located on the NIST Campus in Gaithersburg, MD, has a requirement to establish Blanket Purchase Agreements (BPAs) to supply the Storeroom with electrical supplies on an as-needed basis. The NIST Storeroom and Warehouse is an 11,500 square foot facility, with a 2,700 square foot sales floor, located in Building 301 on the NIST Campus in Gaithersburg, MD. The Storeroom is a part of the NIST Administrative Services Division, Logistics Storeroom Section. Their mission is to service customers better than anyone else could serve them and provide customers the highest quality, variety and convenience. The Storeroom also maintains an on-line catalog to provide NIST personnel with current information on items available. The commodity being procured is electrical supplies. This acquisition will create a maximum of two (2) Blanket Purchase Agreements (BPAs). The period of performance shall be five (5) years from the date of award. Delivery terms shall be FOB DESTINATION. Electrical supplies, which are classified as commercial items in accordance with FAR Part 12, shall be procured using simplified acquisition procedures under the authority of FAR Part 13.5 Test Program for Certain Commercial Items. The associated North American Industrial Classification System (NAICS) code for this procurement is 423610 Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers, with a small business size standard of 100 employees. This acquisition is being procured using full and open competition due to the requirements of the Non-manufacturer Rule. Reference FAR Part 19. The competitive Request for Quotation (RFQ), RFQ amendments, and all questions and answers related to this procurement will be made available via the Internet at http://www.fedbizopps.gov/ under RFP number SB1341-07-RQ-0257. THE RFQ IS ANTICIPATED FOR RELEASE TO THE VENDOR COMMUNITY ON OR ABOUT JUNE 15, 2007, AND WILL ONLY BE AVAILABLE VIA THE INTERNET AT THE ABOVE WEB SITE. A SITE VISIT WILL BE CONDUCTED FOR THIS REQUIREMENT. SITE VISIT DETAILS SHALL BE PROVIDED IN THE SOLICITATION. POTENTIAL OFFERORS ARE RESPONSIBLE FOR ACCESSING THE WEB SITE. Interested parties must respond to the RFQ in order to be considered for award of any resultant BPA. THERE IS NO WRITTEN SOLICITATION DOCUMENT AVAILABLE, TELEPHONE REQUESTS WILL NOT BE HONORED, AND NO BIDDERS LIST WILL BE MAINTAINED. Potential offerors are requested to direct all questions via email to Carol.Wood@NIST.GOV.

R -- Synopsis

Department of the Air Force, Air Mobility Command | Published June 12, 2007  -  Deadline July 25, 2007
cpvs

CLASSIFICATION CODE: R ? PROFESSIONAL, ADMINISTRATIVE, AND MANAGEMENT SUPPORT SERVICES The contractor shall perform Aircraft Deicing Fluid Recovery Services at McGuire AFB, N.J. The contractor shall provide all qualified personnel, equipment, transportation, tools, materials, supervision, supplies, and other items necessary to perform contracted services, unless specified as provided by the Government. Contractor tasks include: Provide aircraft deicing fluid recovery services 7 days a week, 24 hours a day (including weekends and holidays). This is a commercial acquisition. This solicitation is a request for quote and is issued as a 100% small business set aside under Standard Industrial Classification (SIC) code 4581, NAICS code is 488119 and the related Small Business Size standard is $6.5M. The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-16. The proposed performance period is a Base Period from 1 October 2007? 31 March 2008 and four one year options. All potential sources must obtain a DUNS number and register in the Central Contractor Register (CCR) in order to transact business with the government. Failure to obtain a DUNS number and register in the CCR may result in the delay of award of a contract or possible award to the next otherwise successful offeror who is registered in the CCR at the time of award. Solicitation will be issued on or about 26 Jun 07. Due date will be stated in the solicitation. The entire solicitation will be made available only on the Electronic Posting System (EPS) Website at http://www.fedbizopps.gov. The solicitation can be accessed by following the links on the EPS website to: USAF Offices, Air Mobility Command, 305 CONS. Paper copies will not be available. Once the solicitation is posted, it is incumbent upon the interested parties to review this site frequently for any updates/amendments to this solicitation. All responsible sources may submit a proposal which, if timely received, will be considered by the agency. All prospective offerors interested in submitting a proposal on this solicitation must have a Commercial and Government Entity code (CAGE code). IAW AFFARS 5352.201-9101: OMBUDSMAN (AUG 2005) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the Center/MAJCOM ombudsmen, Michael Jackson, HQ AMC/A&K, 507 Symington Drive, Scott AFB, IL 62225-5022, Phone: 618-229-0267, fax: 618-256-6668; email: michael.jackson@scott.af.mil. at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer, Roseclair Thompson at roseclair.thompson@mcguire.af.mil. Questions about this acquisition should be emailed to Karin Quagliato at karin.quagliato@mcguire.af.mil or Mrs. Roseclair Thompson at roseclair.thompson@mcguire.af.mil.

R -- An Analysis of Small Business Patents by Industry and Firm Size

Small Business Administration, Office of Administration | Published June 13, 2007  -  Deadline June 22, 2007
cpvs

An Analysis of Small Business Patents by Industry and Firm Size

R -- File Repository Maintenance Support Services

Department of Commerce, Patent and Trademark Office (PTO) | Published June 14, 2007  -  Deadline July 23, 2007
cpvs

The U.S. Patent and Trademark Office (USPTO) plans to acquire File Repository Maintenance Support Services. These services include, but are not limited to, filing and retrieval of all patent and trademark related files and miscellaneous documents, delivery service, and repository records maintenance. The USPTO anticipates the period of performance of this acquisition to be for a base period and four, one-year option periods. The acquisition will be available for competition among qualified small business concerns only. The small business competitive acquisition will be classified under the North American Industrial Classification System (NAICS) Code 493110. This acquisition will be conducted as a Commercial Item acquisition using procedures in FAR Part 12. Further instructions will follow in the solicitation. The solicitation will not be posted before July 23, 2007. The solicitation will be made available on the USPTO?s business opportunity Internet site at http://www.uspto.gov/web/offices/ac/comp/proc/currproj.htm.

Y--Physical Fitness Center, Fort Bliss, Texas

Department of the Army, U.S. Army Corps of Engineers | Published June 15, 2007  -  Deadline August 10, 2007
cpvs

This solicitation will be a unrestricted, Single Award Contract for the U.S. Army Corps of Engineers (Southwest Division) for Design-Build Construction Services, to include (but not limited to) planning, design, and the construction of a Physical Fit ness Center within the boundaries of Fort Bliss, Texas. SCOPE OF WORK: Physical Fitness Center. This contract will include all management, supervision, labor, materials, and equipment necessary to provide a complete and functional Physical Fitness Center and supporting facilities. The contractor must coordinate with the Land Development Engineer, local utility providers, and local/state roadway agencies as applicable during design and construction of the Physical Fitness Center. The Physical Fitness Facility the approximate size 120,125 SF consisting of design and construction to include: gymnasium, fitness assessment room, weight rooms, cardio rooms, aerobic rooms, climbing wall, combative areas, boxing room, indoor running trac k, concessions/pro-shop, multi-use rooms, concrete walled racquetball courts, locker rooms (sized and located to eventually add an aquatic center , Project Number 57434), saunas (separate men's and women's), public toilets, information systems, offices, an d meeting area with smart classroom capabilities (for large briefings and sports/fitness meetings/lectures). Supporting facilities include utilities, air conditioning, electric service, fire protection and alarm systems, paving, walks, curbs and gutters, s torm drainage, landscaping and site improvements. Access for individuals with disabilities will be provided. Comprehensive building and furnishings related interior design services are required. Typical work for the project may include, but is not limited to 1) planning, design, estimating, and construction 2) site verification and design 3) site engineering to include subsurface investigations, laboratory analysis, and final geotechnical report 4 ) foundation design 5) coordination with utility providers and Land Development Engineer, and other product line contractors 6) acquiring all local, state and federal permits 7) architecture and interior design to include building exterior and interior, an d signage 8) design of telecommunications systems and service 9) heating, ventilation, and air conditioning to include building automation systems, testing, adjusting and balancing, and commissioning 10) energy conservation 11) fire protection 12) site ele ctrical systems 13) meetings and design review conferences 14) quality control systems 15) safety plans 16) environmental protection through the following products: environmental protection plans, incorporating protection features, environmental assessment of contract deviations, land resources plans, monitoring water resources, air resource monitoring and control, chemical materials management and waste disposal, recycling and waste minimization, preservation of historical, archaeological, and cultural res ources, protect biological resources, integrated pest management, post construction clean-up 17) scheduling and phasing 18) preparation of design drawings on AutoCadd 19) and development of as-built drawings. CONTRACT INFORMATION: This solicita tion will be evaluated under the Two Phase Design Build Process. The first phase consists of a process known in the commercial design- build industry as the Request for Qualifications or the acronym: RFQ. (This solicitation refers to it as Phase 1) . In Phase 1, interested firms or joint venture entities (referred to as Offerors) may submit certain specified performance capability proposals, demonstrating their capability to successfully execute the design-build construction contract resulting fr om this solicitation. The Government will evaluate the performance capability proposals in accordance with the criteria described in the solicitation and will short-list no more than four of the Phase 1 Offerors to compete for the de sign-build contract in Phase 2 of the process. In Phase 2, the selected Offerors will submit preliminary technical design proposals, the remainder of the performance capability proposals, a preliminary schedule and a price proposal. The Government wil l evaluate the Phase 2 proposals, in accordance with the criteria described for Phase 2 in the solicitation, and award the contract to the responsible Offeror, whose proposal conforms with all the terms and conditions of the solicitation and whose proposal is determined to represent the overall best value to the Government, considering technical-design quality, performance capability, and cost. The following evaluation criteria listed for Phase I and Phase II are proposed as follows: Phase I -Volume I (Performance Capability) - Organizational Structure and Business Management Plan; Team/Corporate Experience; Specialized Experience; Past Performance Information; Key Project Personnel Capabilities and Experience; and Financial Capability. Phase II Volum e I (Remaining Performance Capability Proposal): Key Subcontractors; Preliminary Schedule; Subcontracting Plan - Large Business Offerors; Past Performance on Utilization of Small Business Concerns. Volume II (Design-Technical Information): Building F unctional Arrangement; Building Aesthetics; Minimum Space and Facility Size; Building Systems and Material Quality; Site Design; Sustainable Design Requirements; and Oral Presentation. Volume III (Price and Pro Forma): Price; and Self Performed Work R equirement. The North American Industrial Classification System (NAICS) code applicable to this project is 236220 (Commercial and Institutional Building Construction), which corresponds to SIC 1542. The Small Business Size Standard is $28.5 Million. The magnitude of the projects is between $25 million and $50 million. Estimated solicitation issue date is on or about July 11, 2007 under solicitation number W9127S-07-R-6010. Phase 1 Proposals are anticipated to be due on or about August 15, 2007. If the Government elects to conduct a Pre-Proposal Conference, details regarding the Conference will be provided in the solicitation. The solicitation will be a negotiated acquisition. There will be no public bid opening. Plans and specifications w ill not be provided in a hard paper copy. This solicitation will be issued via Internet only. Notification of amendments shall be made via Internet only, as well. It is therefore the contractors responsibility to check the following address dai ly for any posted changes to this solicitation. For security reasons, all technical and engineering data related to this solicitation will be distributed using the Federal Technical Data Solutions (FedTeDS) system. FedTeDS is a web-based disseminat ion tool designed to safeguard acquisition-related information for all Federal agencies. Interested bidders must register with FedTeDS before accessing the system. Registration instructions can be found on the FedTeDS website (https://www.fedteds.g ov) by clicking on the Register with FedTeDS hyperlink . Contractors registered with the Federal Technical Data Solutions (FedTeDS) may view and/or download this solicitation and all amendments from the Internet after solicitation issuance at the follo wing Internet address: https://www.fedteds.gov/fedteds/start.nsf/frm.vendorlogin?openform&SolicitationNumber=W9127S-07-R-6010 All offerors are encouraged to visit the Armys Single Face to Industry Website at https://acquisition.army.mil/asfi to view ot her business opportunities. Offerors must be registered with the Central Contractor Registration (CCR), in order to receive a Government contract award. To register, the CCR Internet address is: http://www.ccr.gov. You are advised that FedTeDS currently does not have a Plan Holders List capability. Therefore, offerors are encouraged to register as a Interested Vendor on the www.FedBizOps.gov website. You will not be able to download plans from this site; however it will provide a line to the file on FedTeds (you must be registered with FedTeds to download files). The contract specialist for this solicitation will be Dudley.A.Smith, 501-324-5720; or by e-mai l at Dudley.A.Smith@us.army.mil.

J -- Inspect & Maintain Roll-Up, Sectional and Overhead Doors

Department of the Air Force, Air Force Reserve Command | Published June 15, 2007  -  Deadline August 17, 2007
cpvs

The 482d MSG Operational Contracting Office at Homestead Air Reserve Base, Miami-Dade County, FL is issuing a solicitation for commercial services prepared in accordance with Federal Acquisition Regulation 12 to inspect and maintain Roll-Up, Sectional and Overhead Doors. Contractor is to provide all labor, tools, parts, transportation, material, equipment and supervision necessary to perform operational inspection, tests and maintenance as necessary of Roll-Up, Sectional and Overhead Doors at various locations on Homestead ARB in accordance with all applicable laws, regulations, standards, instructions and commercial practices as described in the Statement of Work (SOW). Contract period is 01 October 2007 through 30 September 2008 with four additional one-year option periods, renewable each year. The standard industrial classification code is 332321 with a small business size standard of 500 employees. A Firm Fixed-Price contract will be awarded contingent upon release of reserved funds. The projected date for availability of the solicitation package is on or about 10 July 2007. Defense Federal Acquisition Regulation (DFARS) 252.204-7004, required Central Contractor Registration will be incorporated in this acquisition. Offeror must be currently registered in the Central Contractor Registration (CCR) database at the time of quote/bid submittal. The offeror shall provide its DUNS or if applicable, DUNS + 4 number with its offer, which will be used by the Contracting Officer to verify that an offeror is registered in the Central Contractor Registration (CCR) database. Lack of registration in the CCR database will render an offeror ineligible for award. Contractors are recommended to initiate CCR registration and/or complete your annual confirmation requirements via the internet at: http://www.ccr.gov or by calling 1-800-227-2423. Additionally, the successful offeror will be required to submit invoices using Wide Area WorkFlow-Receipt and Acceptance (WAWF-RA). Information regarding WAWF-RA is available on the internet at: https://wawf.eb.mil. This will be a Request for Quote. All responsible sources may request a solicitation package in writing to 482d MSG/CONF/LGC, 29050 Coral Sea Blvd, Homestead ARB, FL 33039-1299 or by e-mail to samuel.kuntz@homestead.af.mil. NO TELEPHONE REQUESTS FOR SOLICITATION PACKAGES WILL BE ACCEPTED. All requests should include solicitation number, company name, address, phone and fax number, e-mail address and point/person of contact.
Categories
  United States - Show all countries
Multiple shipping information. (4447)Gaithersburg, md (1483)See statement of work. (1456)Washington, dc (1076)Travis afb, ca (830)Fort worth, tx (744)Fort drum, ny 13602 (737)Norfolk, va (661)Special shipping instructions. (626)See place of performance. (620)Philadelphia, pa (569)W street bremerton, wa (536)Tobyhanna, pa 18466 (474)Fort irwin, ca 92310 (461)Fort hood, tx 76544 (445)Virginia beach, va (429)San diego, ca (413)West point, ny 10996 (401), null null (380)Usaf academy, co (352)Fort benning, ga 31905 (344)Marine corps base camp lejeune - rco marine corps base camp lejeune, nc (344)Grand coulee, wa 99133 (343)Bethesda, md (313)Sterling, va 20166 (312)North harbor drive san diego, ca (296)Portsmouth, va (277)Quantico, va (270)Valdez circle dugway, ut (265)Sheppard afb, tx (260)Fort riley, ks 66442 (259)Fort stewart, ga 31314 (254)Seal beach, ca (254)Quantico, va 22135 (243)Rockville, md (242)Fort bragg, nc 28310 (233)Washington, dc 20520 (232)Columbus, oh (219)Springfield, va 22153 (218)Mountain home afb, id (216)Fort stewart, ga 31314 (212)Aberdeen proving ground, md 21005 (209)Industrial way west eatontown, nj (201)Norfolk, va (201)Arlington, va (191)Floor fort carson, co (184)Tampa, fl (182)Kings bay, ga 31547 (181)Fort carson, co 80913 (179)Gulfport, ms 39501 (179)San antonio, tx (177)Camp lejeune, nc (176)Tbd (176)Linden, nj 07036 (175)Pearl harbor, hi (172)Boulder, co (171)Baltimore, md (169)Fort sam houston, tx 78234 (165)Vandenberg afb, ca (164)White sands missile range, nm 88002 (162)Fort irwin, ca 92310 (156)Fort lewis, wa 98433 (156)Tobyhanna, pa 18466 (156)Fort hood , tx 76544 (152)Grand coulee, wa 99133 (150)Joint base lewis-mcchord, wa 98433 (150)Natick, ma 01760 (149)Atlanta, ga (148)Fort gordon, ga 30905 (147)Springfield, va 22153 (142)Christopher way eatontown, nj (140)Chamblee, ga 30341 (138)Fort rucker, al 36362 (138)Fort jackson, sc 29207 (135)Denver, co 80225 (132)Golden gate avenue san francisco, ca (131)Mcalester, ok 74501 (131)Little rock, ar (130)Port hueneme, ca (130)Chicago, il (127)Fort gordon, ga (127)Fort eustis, va 23604 (124)Tucson, az (123)Fort benning, ga 31905 (121)Fort bliss, tx 79916 (121)Jblm, wa 98433 (120)Fws, division of contracting and ge (119)Hurlburt field, fl (118)Norfolk, va 23511 (118)Panama city, fl 32407 (118)Roger brooke drive fort sam houston, tx (118)Aurora, co (116)Fort bragg, nc 28310 (116)Fort knox, ky 40121 (116)Philadelphia, pa 19112 (116)Richmond, ky 40475 (113)Fort campbell, ky 42223 (111)Herlong, ca (111)Lincoln street tacoma, wa (111)