Public tenders for industrial in South-burlington United States

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!
IndustrialUnited Statessouth-burlington

Maintain/Repair/Add HH60 Maintenance Hangar, B751, Patrick AFB, Florida

Department of the Army, U.S. Army Corps of Engineers | Published November 22, 2017  -  Deadline December 7, 2017
cpvs

The U.S. Army Corps of Engineers (USACE) Louisville District intends to issue a Design/Build Request for Proposal (RFP) for the design and renovation of a 47,000 square foot facility (Bldg. 751) at Patrick AFB, FL. Hangar 751 is a 1940s era maintenance hangar that houses the 920 Maintenance Group, 920 Aircraft Squadron, and 920 Maintenance Squadron. The building systems, to include electrical, mechanical, and fire protection all need to be upgraded in order to meet mission necessities, health, life and safety requirements as they have exceeded their life expectancy. The project includes the resurfacing of the hangar concrete floor surface, the repair of hangar doors and their components. This project includes elements of minor construction to provide central HVAC to the office area, install approximately 25,000 square feet of bird netting in the hangar bay just below the structural steel roof truss system and provide site preparation and utilities for temporary facilities. TYPE OF CONTRACT AND NAICS: This RFP will be for one (1) Firm-Fixed-Price (FFP) contract. The North American Industrial Classification System Code (NAICS) for this effort is 236220 - Commercial and Institutional Building Construction. TYPE OF SET-ASIDE: This acquisition will be an Unrestricted (Full and Open) competitive procurement. SELECTION PROCESS: The proposals will be evaluated using a Best Value Trade-Off source selection process. This will be a two-phase Design/Build procurement process. Potential offerors are invited to submit their Prime Contractor and Designer of Record Past Performance, technical approach, and capability information as will be described in Section 00116 of the Solicitation, for review and consideration by the Government. The selection process for Phase I will evaluate such factors (not necessarily in order): Past Performance and Technical Approach. Pro Forma Information such as bonding and financial capability will also be required to meet the minimum requirements of the solicitation. Following completion of the evaluation of Phase I, up to a maximum of five (5) most highly qualified offerors will be invited to participate in Phase II. The selected offerors for Phase II will be invited to submit additional information as will be described in Section 00118 of the Solicitation, for review and evaluation by the Government. The selection process for Phase II will evaluate such factors (not necessarily in order): Design/Technical (Design Drawings and Design Narrative), Management Plan, Schedule, Small Business Participation Plan, and Price. DISCUSSIONS: The Government intends to award without discussions, but reserves the right to conduct discussions should it be deemed in the Government's best interest. CONSTRUCTION MAGNITUDE: The magnitude of this construction project is anticipated to be between $10,000,000 and $25,000,000 in accordance with DFARS 236.204. ANTICIPATED SOLICITATION RELEASE DATE: The Government anticipates releasing the solicitation on or about 12 December 2017 with an approximate closing date for Phase I proposals will be on or about 16 January 2018. Actual dates and times will be identified in the solicitation. Responses to this synopsis are not required. Additional details may be found in the solicitation when it is posted. SOLICITATION WEBSITE: The official solicitation, when posted, will be available free of charge by electronic posting only and may be found at the Federal Business Opportunities website, http://www.fbo.gov. Paper copies of the solicitation will not be issued. Telephone and Fax requests for this solicitation will not be honored. Project files are Portable Document Format (PDF) files and can be viewed, navigated, or printed using Adobe Acrobat Reader. To download the solicitation for this project, contractors are required to register at the Federal Business Opportunities website at http://www.fbo.gov. Amendments, if/when issued, will be posted to the above referenced website for electronic downloading. This will be the only method of distributing amendments prior to closing; therefore, it is the Offerors responsibility to check the website periodically for any amendments to the solicitation. REGISTRATIONS: Offerors shall have and shall maintain an active registration in the SAM database at http://www.sam.gov to be eligible for a Government contract award. If at the time of award an Offeror is not actively and successfully registered in the SAM database, the Government reserves the right to award to the next prospective Offeror. POINT-OF-CONTACT: The point-of-contact for this procurement is Contract Specialist, Pat Duggins at Patrick.J.Duggins@usace.army.mil.

42--VEST SIMMUNITION(LIKE OR SIMILAR TO FX 9000)

Department of the Army, FedBid | Published November 30, 2017  -  Deadline December 4, 2017
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is POLKBC0001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-96. The associated North American Industrial Classification System (NAICS) code for this procurement is 448190 with a small business size standard of $20.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-12-04 15:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FT POLK, LA 70634The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Providing outstanding torso protection, the FX®9000 vest is produced from high-strength textile. Resistant to wear and tear. Two models: male and female (extra chest padding). Available in black. the user’s duty belt. Available in S (30"-34"), M (36"-38"), L (40"-42"), Simunition® - Division SNC Tec, 500, EA;Solicitation and Buy Attachments***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing” basis.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

42--MASK SIMUNITIONS (like or similar to the FX 9003)

Department of the Army, FedBid | Published November 30, 2017  -  Deadline December 4, 2017
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is POLKBC0002 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-96. The associated North American Industrial Classification System (NAICS) code for this procurement is 448190 with a small business size standard of $20.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-12-04 12:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FT POLK, LA 70634The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: MASK SIMMUNITION-LIKE OR SIMILAR TO THE FX 9003 HEAD PROTECTION PERFORMANCE HIGHLIGHTS: • Provides proper cheek weld for improved target acquisition; • Increased breathability and lens airflow; • Increased hearing and voice transmission capability; • Can be fitted with most types of service helmet; • Compatible with most personal prescription corrective eye wear and can accommodate ESS and Revision RX corrective vision inserts; • Comes with a modular protective hard top for users without service helmets; • Available in Black (PN8971960) and Desert Tan (PN8971962), 500, EA;Solicitation and Buy Attachments***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing” basis.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

37--CYCLONE 48" ROTARY BRUSH CUTTER

Department of the Army, FedBid | Published November 13, 2017  -  Deadline November 16, 2017
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is POLKDPWYRB0001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-96. The associated North American Industrial Classification System (NAICS) code for this procurement is 444210 with a small business size standard of $7.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-11-16 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Polk, LA 71459The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: CYCLONE 48" ROTARY BRUSH CUTTER - NEEDS TO MOUNT TO KX057 KUBOTA EXCAVATOR, 1, EA;Solicitation and Buy Attachments***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing” basis.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

Projector and Lite Data Acquisition System

Department of Health and Human Services, National Institutes of Health | Published September 7, 2016  -  Deadline September 17, 2016
cpvs

INTRODUCTIONTHIS IS A PRE-SOLICITATION NON-COMPETITIVE (NOTICE OF INTENT) SYNOPSIS TO AWARD A CONTRACT WITHOUT PROVIDING FOR FULL OR OPEN COMPETITION (INCLUDING BRAND-NAME). The National Institute on Drug Abuse (NIDA), Station Support and Simplified Acquisitions (SSSA) Branch intends to solicit by a request for quotation from VPixx Technologies, Inc. for award on or around September 23, 2016. The purpose of this purchase order will be to provide the National Institute of Mental Health (NIMH) with a projector and data acquisition system for use by researchers to perform research in the fundamental brain mechanisms that allow sensory-motor coordination, specifically the visual/oculomotor system. NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE and SET ASIDE STATUSThe intended procurement is classified under NAICS code 334419 with a Size Standard of 500 Employees. This acquisition is NOT set aside for small businesses.REGULATORY AUTHORITY This acquisition is conducted under the authority of the Federal Acquisition Regulation (FAR) Part 13-Simplified Acquisition Procedures. Contracts awarded using FAR Part 13-Simplified Acquisition Procedures are exempt from the requirements of FAR Part 6-Competition Requirements. FAR Subpart 13.106-1 (b) Soliciting from a single source provides that: For purchases not exceeding the simplified acquisition threshold, Contracting officers may solicit from one source IF the contracting officer determines that the circumstances of the contract action deem only one source reasonably available (e.g., urgency, exclusive licensing agreements, brand-name OR industrial mobilization). The resultant contract will include all applicable provisions and clauses in effect through the Federal Acquisition Circular (FAC) 2005-85 dated August 15, 2016. DESCRIPTION OF REQUIREMENTPURPOSE AND OBJECTIVES:The National Institute of Mental Health Neurophysiology Imaging Facility requires a projector and data acquisition system for use by researchers to perform research in the fundamental brain mechanisms that allow sensory-motor coordination, specifically the visual/oculomotor system. During experiments a computer-driven monitor system displays images that are designed to test perception in an awake behaving monkey. The monkey will be monitored for both brain activity, eye direction, and in some cases asked to perform a simple task. This projector will be installed in the soon-to-be-built 3T magnet facility in late 2016/early 2017. ACQUISITION DESCRIPTION:NIMH requires a POPixx Lite: Projector and lite data acquisition system inclusive of the following part numbers and quantities: VPX‐PRO‐5000A PROPixx Lite: Projector and lite data acquisition system QTY: 1 VPX‐ACC‐6508 Super long‐throw lens, throw ratio of 3.3 ‐ 5.94 : 1, focus range 4.0 ‐ 40.0 ftQTY: 1 VPX‐ACC‐7000 Dual‐link DVI cable + booster and active USB cable, length 35 feet/10 metersQTY: 1 The PROPixx is a unique DLP LED projector which has been designed to be the most flexible display possible for vision research. The PROPixx features a native resolution of 1920 x 1080 and can be driven with refresh rates up to 1440 Hz with deterministic timing. The PROPixx uses high brightness LEDs as a light source, giving a larger color gamut and much longer lifetime than halogen light sources (60,000 hrs vs 2,000 hrs). NIMH's LEDs also support high bit depth and high frequency full color stimulation, which would not be possible with a color-wheel/halogen architecture. For stereo vision applications, our high speed circular polarizer can project stereoscopic stimuli for passive polarizing glasses at up to 400 Hz. CONTRACTING WITHOUT PROVIDING FOR FULL OR OPEN COMPETITION (INCLUDING BRAND-NAME) DETERMINATIONThe determination by the Government to award a contract without providing for full and open competition is based upon the market research conducted. Specifically, VPixx Technologies, Inc. is the only vendor in the marketplace that can provide the equipment required by NIMH. In accordance with FAR part 10, extensive market research was conducted to reach this determination. Specifically, a sources sought notice was posted to FedBizOpps referencing the above detailed requirements and no responses were received from other vendors. Additionally, contacts with knowledgeable individuals both in industry and Government, as well as reviews of available product literature, revealed no other sources. Finally, a review of the GSA Advantage, and Dynamic Small Business Search returned no results that meet all of the requirements. Therefore, only VPixx Technologies, Inc. is capable of meeting the needs of this requirement. The Intended Source Is:VPixx Technologies, Inc. CLOSING STATEMENTTHIS SYNOPSIS IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, interested parties may identify their interest and capability to respond to this notice. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. The information received will normally be considered solely for the purposes of determining whether to proceed on a non-competitive basis or to conduct a competitive procurement. Responses to this notice shall contain sufficient information to establish the interested parties' bona-fide capabilities for fulfilling the requirement and include: unit price, list price, shipping and handling costs, the delivery period after contract award, the prompt payment discount terms, the F.O.B. Point (Destination or Origin), the Dun & Bradstreet Number (DUNS), the Taxpayer Identification Number (TIN), and the certification of business size. All offerors must have an active registration in the System for Award Management (SAM) www.sam.gov. All responses must be received by the closing date and time of this announcement and must reference the solicitation number, HHS-NIH-NIDA-SSSA-NOI-16-699. Responses must be submitted electronically to Keshia McDonald, Contract Specialist, at keshia.mcdonald@nih.gov. U.S. Mail and Fax responses will not be accepted.

F--Aerial Burn

Department of the Army, FedBid | Published August 30, 2016  -  Deadline September 7, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is PR0010825060 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-90. The associated North American Industrial Classification System (NAICS) code for this procurement is 115310 with a small business size standard of $7.50M.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-09-07 15:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Polk, LA 71459 The MICC Fort Polk requires the following items, Meet or Exceed, to the following: LI 001: Aerial Burn Support Services (See PWS), 29562, Acre; LI 002: Contract Manpower Reporting Contractor is required to provide data on Contractor labor hours (including subcontractor labor hours) for performance of this contract IAW the PWS. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter ?No Cost?. Instructions, including the Contractor and Department of the Army CMRA (Contractor Manpower Reporting Application) website at: https://www.ecmra.mil., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Polk intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Polk is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Bid MUST be good for 30 calendar days after submission

23--Dump Truck

Department of the Army, FedBid | Published August 24, 2016  -  Deadline August 30, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010868399 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89. The associated North American Industrial Classification System (NAICS) code for this procurement is 336212 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-08-30 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Polk, LA 71459 The MICC Fort Polk requires the following items, Brand Name or Equal, to the following: LI 001: Ledwell 5/6 Yard Dump Truck, Brand name or equal: See Salient Characteristics Document., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Polk intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Polk is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Will be based on lowest price technically acceptable. The sum of all priced items and the quantity stated in this solicitation will be considered as a total price. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions Seller must be registered with the System for Award Management (SAM) prior to receipt of order. Information can be found at https://www.sam.gov or thier Service Desk URL: http://www.FSD.gov (8am - 8pm Eastern Time) US Calls: 866-606-8220 International Calls: 334-206-7828 New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 30 calendar days after submission Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments unless otherwise specified at time of order In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL As prescribed in 52.107(a), insert the following provision: SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of provision) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of clause) 52.212-1 Instructions to Offerors?Commercial Items. (FEB 2012) 52.212-3 Offeror Representations and Certifications?Commercial Items (Apr 2012) 52.223-18 Encouraging Contractor Policies To Ban Text Messaging While Driving AUG 2011 52.202-1 Definitions JAN 2012 52.204-7 Central Contractor Registration FEB 2012 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 252.201-7000 Contracting Officer's Representative DEC 1991 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports MAR 2008 252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 (a) Pursuant to Department of Defense Instruction Number 2000.16, ?DoD Antiterrorism (AT) Standards,? dated October 2, 2006, each contractor employee requiring access to a Federally-controlled installation, facility and/or Federally-controlled information system(s) shall complete Level I AT Awareness Training on an annual basis and receive a certificate of completion. The training is accessible from any computer and is available at https://atlevel1.dtic.mil/at/. The contractor is responsible for ensuring that all applicable employees have completed antiterrorism awareness training and shall certify that their workforce has completed the training through the submission of completion certificate(s) to the Contracting Officer and the Contracting Officer?s Representative (if appointed) within five working days after contract award or prior to access to a Federally-controlled installation or information system. (b) In the event that the automated system at https://atlevel1.dtic.mil/at/ is not available (e.g., server problems), Level I AT Awareness Training can be provided by a qualified instructor. However, if the training is not completed online, the Level I AT Awareness Instructor qualification must be coordinated with the Installation Antiterrorism Officer (or Installation Security equivalent) and the resultant name(s) of approved instructors shall be provided the contracting officer or designee along with all associated cost or schedule impacts to the contract. (c) Antiterrorism performance (Level I AT Awareness Training attendance and compliance) may be documented as a performance metric under the resultant contract, and be part of past performance information in support of future source selections. (End of clause) 5152.233-4000, AMC-Level Protest Program (FEB 2014) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer. However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: http://www.amc.army.mil/amc/commandcounsel.html. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. (End of Clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (JUN 2012) (a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, if checked, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components. __XX__ 52.203-3, Gratuities (APR 1984) (10 U.S.C. 2207). (b) The Contractor agrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components. (ii) XX Alternate I (OCT 2011) of 252.225-7001. (23) XX 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) (10 U.S.C. 2227). c) In addition to the clauses listed in paragraph (e) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5), the Contractor shall include the terms of the following clauses, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: (1) 252.225-7039, Contractors Performing Private Security Functions (JUN 2012) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383). 2) 252.227-7013, Rights in Technical Data--Noncommercial Items (FEB 2012), if applicable (see 227.7103-6(a)). (3) 252.227-7015, Technical Data--Commercial Items (DEC 2011), if applicable (see 227.7102-4(a)). (4) 252.227-7037, Validation of Restrictive Markings on Technical Data (JUN 2012), if applicable (see 227.7102-4(c)). (5) 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84). (6) 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). (7) 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417). (8) 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631). (9) 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631). (End of clause) The seller agrees that the attachment entitled "Terms and Conditions" are additional terms and conditions of this buy.

23--Truck Tractor

Department of the Army, FedBid | Published August 24, 2016  -  Deadline August 30, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010868126 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89. The associated North American Industrial Classification System (NAICS) code for this procurement is 333924 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-08-30 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Polk, LA 71459 The MICC Fort Polk requires the following items, Brand Name or Equal, to the following: LI 001: 2016 CAT CT680 DAY CAB TRACTOR, Brand name or equal: See Salient Characteristics Document., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Polk intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Polk is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Will be based on lowest price technically acceptable. The sum of all priced items and the quantity stated in this solicitation will be considered as a total price. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions Seller must be registered with the System for Award Management (SAM) prior to receipt of order. Information can be found at https://www.sam.gov or thier Service Desk URL: http://www.FSD.gov (8am - 8pm Eastern Time) US Calls: 866-606-8220 International Calls: 334-206-7828 New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 30 calendar days after submission Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments unless otherwise specified at time of order In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL As prescribed in 52.107(a), insert the following provision: SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of provision) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of clause) 52.212-1 Instructions to Offerors?Commercial Items. (FEB 2012) 52.212-3 Offeror Representations and Certifications?Commercial Items (Apr 2012) 52.223-18 Encouraging Contractor Policies To Ban Text Messaging While Driving AUG 2011 52.202-1 Definitions JAN 2012 52.204-7 Central Contractor Registration FEB 2012 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 252.201-7000 Contracting Officer's Representative DEC 1991 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports MAR 2008 252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 (a) Pursuant to Department of Defense Instruction Number 2000.16, ?DoD Antiterrorism (AT) Standards,? dated October 2, 2006, each contractor employee requiring access to a Federally-controlled installation, facility and/or Federally-controlled information system(s) shall complete Level I AT Awareness Training on an annual basis and receive a certificate of completion. The training is accessible from any computer and is available at https://atlevel1.dtic.mil/at/. The contractor is responsible for ensuring that all applicable employees have completed antiterrorism awareness training and shall certify that their workforce has completed the training through the submission of completion certificate(s) to the Contracting Officer and the Contracting Officer?s Representative (if appointed) within five working days after contract award or prior to access to a Federally-controlled installation or information system. (b) In the event that the automated system at https://atlevel1.dtic.mil/at/ is not available (e.g., server problems), Level I AT Awareness Training can be provided by a qualified instructor. However, if the training is not completed online, the Level I AT Awareness Instructor qualification must be coordinated with the Installation Antiterrorism Officer (or Installation Security equivalent) and the resultant name(s) of approved instructors shall be provided the contracting officer or designee along with all associated cost or schedule impacts to the contract. (c) Antiterrorism performance (Level I AT Awareness Training attendance and compliance) may be documented as a performance metric under the resultant contract, and be part of past performance information in support of future source selections. (End of clause) 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (NOV 2008) (LOCAL CLAUSE) If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Protest to HQAMC shall be filed at: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. (End of Clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (JUN 2012) (a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, if checked, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components. __XX__ 52.203-3, Gratuities (APR 1984) (10 U.S.C. 2207). (b) The Contractor agrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components. (ii) XX Alternate I (OCT 2011) of 252.225-7001. (23) XX 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) (10 U.S.C. 2227). c) In addition to the clauses listed in paragraph (e) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5), the Contractor shall include the terms of the following clauses, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: (1) 252.225-7039, Contractors Performing Private Security Functions (JUN 2012) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383). 2) 252.227-7013, Rights in Technical Data--Noncommercial Items (FEB 2012), if applicable (see 227.7103-6(a)). (3) 252.227-7015, Technical Data--Commercial Items (DEC 2011), if applicable (see 227.7102-4(a)). (4) 252.227-7037, Validation of Restrictive Markings on Technical Data (JUN 2012), if applicable (see 227.7102-4(c)). (5) 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84). (6) 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). (7) 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417). (8) 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631). (9) 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631). (End of clause) The seller agrees that the attachment entitled "Terms and Conditions" are additional terms and conditions of this buy.

65--BJACH Workwear

Department of the Army, FedBid | Published August 8, 2016  -  Deadline August 12, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010882502 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89. The associated North American Industrial Classification System (NAICS) code for this procurement is 315990 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-08-12 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Polk, LA 71459 The MICC Fort Polk requires the following items, Brand Name or Equal, to the following: LI 001: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex 3 pkt Tunic Small, 60, EA; LI 002: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex 3 pkt Tunic Medium, 100, EA; LI 003: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex 3 pkt Tunic Large, 100, EA; LI 004: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex 3 pkt Tunic Extra Large, 60, EA; LI 005: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex 3 pkt Tunic 2 Extra Large, 30, EA; LI 006: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex 3 pkt Tunic 3 Extra Large, 30, EA; LI 007: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex Drawstring Pants Small, 60, EA; LI 008: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex Drawstring Pants Medium, 100, EA; LI 009: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex Drawstring Pants Large, 100, EA; LI 010: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex Drawstring Pants Extra Large, 60, EA; LI 011: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex Drawstring Pants 2 Extra Large, 40, EA; LI 012: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex Drawstring Pants 3 Extra Large, 20, EA; LI 013: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex Drawstring Pants Medium Tall WW, 40, EA; LI 014: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex Drawstring Pants Large Tall WW, 30, EA; LI 015: Brand Name or Equal - Cherokee Workwear Galaxy Blue Jewel Neck Warm Up Jacket Medium, 75, EA; LI 016: Brand Name or Equal - Cherokee Workwear Galaxy Blue Jewel Neck Warm Up Jacket Large, 75, EA; LI 017: Brand Name or Equal - Cherokee Workwear Galaxy Blue Jewel Neck Warm Up Jacket Extra Large, 75, EA; LI 018: Brand Name or Equal - Cherokee Workwear Galaxy Blue Jewel Neck Warm Up Jacket 2 Extra Large, 20, EA; LI 019: Brand Name or Equal - Cherokee Workwear Galaxy Blue Jewel Neck Warm Up Jacket 3 Extra Large, 20, EA; LI 020: Brand Name or Equal - Cherokee Workwear Galaxy Blue Unisex Drawstring Pants Extra Large Tall WW, 30, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Polk intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Polk is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Will be based on lowest price technically acceptable. The sum of all priced items and the quantity stated in this solicitation will be considered as a total price. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions Seller must be registered with the System for Award Management (SAM) prior to award. Information can be found at https://www.sam.gov or thier Service Desk URL: http://www.FSD.gov (8am - 8pm Eastern Time) US Calls: 866-606-8220 International Calls: 334-206-7828 New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 30 calendar days after submission Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments unless otherwise specified at time of order In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL As prescribed in 52.107(a), insert the following provision: SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of provision) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of clause) 52.212-1 Instructions to Offerors?Commercial Items. (FEB 2012) 52.212-3 Offeror Representations and Certifications?Commercial Items (Apr 2012) 52.223-18 Encouraging Contractor Policies To Ban Text Messaging While Driving AUG 2011 52.202-1 Definitions JAN 2012 52.204-7 Central Contractor Registration FEB 2012 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 252.201-7000 Contracting Officer's Representative DEC 1991 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports MAR 2008 252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 Provision at FAR 52.212-1, Instruction to Offerors ? Commercial Items, applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation is the most advantageous to the Government, price and other factors considered. Addendum to 52.212-1 Instructions to Offerors--Commercial Items JUN 2008: The submission content is as follows and must be submitted and arranged in the sequential order listed below: 1. Acknowledgment of Solicitation Amendments. The offeror must submit a statement to acknowledge solicitation amendments, if applicable. 2. Schedule of Pricing. The quoter must submit a quoted price for Contract Line Item Numbers (CLIN) 0001, 0002, 0003, 0004, 0005, 0006 and 0007. (See Schedule B Attached) 3. Representations and Certifications, FAR clause 52.212-3 Alt I and DFARS clause 252.212-7000. The offeror must complete and submit the required representations and certifications. 4. The apparent low quoter must submit performance and banking information at the request of the Contracting Officer. This information will be used to determine that the contractor can meet the minimum standards for responsible contractors as defined in Federal Acquisition Regulation (FAR) 9.104-1. a. Past Performance. At the request of the Contracting Officer, the apparent low quoter must submit at least three (3) but no more than five (5) past performance references for recent and relevant contracts performed within the past three (3) years for the same or similar items required under the solicitation. Contracts may include those with federal, state and local Government as well as private companies. References must be of comparable magnitude and similar in nature to the work required under this solicitation. Each reference must include the following information: - Contract Number and contract dollar value, - The contract period of performance, - A brief description of the contract requirements, - The contract point of contact, telephone number, and facsimile number. b. Banking Information. At the request of the Contracting Officer, the apparent low quoter must submit the name and address of the quoter?s bank or financial institution, and the name, title, and telephone number of the quoter?s point of contact. The banking information may be used, in part, to determine responsibility. The Government may request information from the quoter?s financial institution to determine that the quoter has adequate financial resources, or the ability to obtain the resources, to perform the contract requirements. The apparent low quoter should submit a statement authorizing the financial institution to release applicable information. (a) The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Price, Technical Capability, and Responsibility: As Authorized under FAR Subpart 13.5, Test Procedures for Certain commercial Items, simplified procedures will be used to evaluate offer and award this requirement. Proposed price will be evaluated for reasonableness using the price analysis techniques provided under FAR Part 13. The Government will review the contractor?s technical certifications to ensure that it reflects a sound approach and understanding of this requirement and that the contractor has the technical ability to successfully perform the requirement. The Government intends to award this procurement based on a determination of a fair and reasonable price. (viii) Provision at FAR 52.212-3, Offeror Representations and Certifications Commercial Items, applies to this acquisition (offfers are to include a completed copy). The contractor shall be registered in the Online Representations and Certifications Application ORCA at http://orca.bpn.gov/. (ix) Clause at FAR 52.212-4 Contract Terms and Conditions Commercial Items, applies to this acquisition. (a) Pursuant to Department of Defense Instruction Number 2000.16, ?DoD Antiterrorism (AT) Standards,? dated October 2, 2006, each contractor employee requiring access to a Federally-controlled installation, facility and/or Federally-controlled information system(s) shall complete Level I AT Awareness Training on an annual basis and receive a certificate of completion. The training is accessible from any computer and is available at https://atlevel1.dtic.mil/at/. The contractor is responsible for ensuring that all applicable employees have completed antiterrorism awareness training and shall certify that their workforce has completed the training through the submission of completion certificate(s) to the Contracting Officer and the Contracting Officer?s Representative (if appointed) within five working days after contract award or prior to access to a Federally-controlled installation or information system. (b) In the event that the automated system at https://atlevel1.dtic.mil/at/ is not available (e.g., server problems), Level I AT Awareness Training can be provided by a qualified instructor. However, if the training is not completed online, the Level I AT Awareness Instructor qualification must be coordinated with the Installation Antiterrorism Officer (or Installation Security equivalent) and the resultant name(s) of approved instructors shall be provided the contracting officer or designee along with all associated cost or schedule impacts to the contract. (c) Antiterrorism performance (Level I AT Awareness Training attendance and compliance) may be documented as a performance metric under the resultant contract, and be part of past performance information in support of future source selections. (End of clause) 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (NOV 2008) (LOCAL CLAUSE) If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Protest to HQAMC shall be filed at: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. (End of Clause) 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAY 2012) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) _XX___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) XX (12)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). __XX__ (14) 52.219-8, Utilization of Small Business Concerns (Jan 2011) (15 U.S.C. 637(d)(2) and (3)). __XX__ (23) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2012) (15 U.S.C. 632(a)(2)). XX (26) 52.222-3, Convict Labor (June 2003) (E.O. 11755). XX (27) 52.222-19, Child Labor?Cooperation with Authorities and Remedies (MAR 2012) (E.O. 3126). XX (28) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). XX (29) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). XX (30) 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212). XX (39) 52.225-1, Buy American Act?Supplies (Feb 2009) (41 U.S.C. 10a-10d). XX (47) 52.232-33, Payment by Electronic Funds Transfer?Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause? (i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note). (ii) 52.219-8, Utilization of Small Business Concerns (DEC 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) Reserved. (iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 1998) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JAN 2009). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (JUN 2012) (a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, if checked, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components. __XX__ 52.203-3, Gratuities (APR 1984) (10 U.S.C. 2207). (b) The Contractor agrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components. (ii) XX Alternate I (OCT 2011) of 252.225-7001. (23) XX 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) (10 U.S.C. 2227). c) In addition to the clauses listed in paragraph (e) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5), the Contractor shall include the terms of the following clauses, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: (1) 252.225-7039, Contractors Performing Private Security Functions (JUN 2012) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383). 2) 252.227-7013, Rights in Technical Data--Noncommercial Items (FEB 2012), if applicable (see 227.7103-6(a)). (3) 252.227-7015, Technical Data--Commercial Items (DEC 2011), if applicable (see 227.7102-4(a)). (4) 252.227-7037, Validation of Restrictive Markings on Technical Data (JUN 2012), if applicable (see 227.7102-4(c)). (5) 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84). (6) 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). (7) 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417). (8) 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631). (9) 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631). (End of clause)

Y--Automatic Gate Installation - USFWS Albuquerque, NM

Department of the Interior, Fish and Wildlife Service | Published July 20, 2016  -  Deadline July 22, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 40283124 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89. The associated North American Industrial Classification System (NAICS) code for this procurement is 237210 with a small business size standard of $27.50M.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-07-22 16:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Albuquerque, NM 87105 The DOI Fish & Wildlife Service requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: Install new automatic electric gate to include removal of old chain gate per attached statement of work, 1, LS; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOI Fish & Wildlife Service intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOI Fish & Wildlife Service is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO re-manufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The offeror must provide within its offer the number of days required to make delivery after it receives a purchase order from the buyer. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: ________________________________________________ ________________________________________________ ________________________________________________ [Contracting Officer shall insert the significant evaluation factors, such as (i) technical capability of the item offered to meet the Government requirement; (ii) price; (iii) past performance (see FAR 15.304); (iv) small disadvantaged business participation; and include them in the relative order of importance of the evaluation factors, such as in descending order of importance.] Technical and past performance, when combined, are __________ [Contracting Officer state, in accordance with FAR 15.304, the relative importance of all other evaluation factors, when combined, when compared to price.] (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer?s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically via http://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at the System for Award Management (SAM) website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision- Economically disadvantaged women -owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. Forced or indentured child labor means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. Inverted domestic corporation, as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code at 26 U.S.C. 7874. Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- 1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). Service-disabled veteran-owned small business concern- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation. Subsidiary means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. Veteran-owned small business concern means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. Women-owned small business concern means a small business concern- (1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b)(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs _____. (Offeror to identify the applicable paragraphs at (c) through (o) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.) (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it ___ is, ___ is not a small business concern. (2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ___ is, ___ is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ___ is, ___ is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, for general statistical purposes, that it ___ is, ___ is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ___ is, ___ is not a women-owned small business concern. (6) WOSB concern eligible under the WOSB Program. (Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.) The offeror represents that- (i) It [ ] is, [ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. (The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _____________________________________.) Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. (Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.) The offeror represents that- (i) It [ ] is, [ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. (The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________________.) Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. Note to paragraphs (c)(8) and (9): Complete paragraphs (c)(8) and (9) only if this solicitation is expected to exceed the simplified acquisition threshold. (8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ___ is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ____________________. (10) (Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns, or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.) (i) General. The offeror represents that either- (A) It ___ is, ___ is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the SAM Dynamic Small Business Search database maintained by the Small Business Administration, and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It ___ has, ___ has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(10)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. (The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: _______________.) (11) HUBZone small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, as part of its offer, that- (i) It ____ is, ____ is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and (ii) It ____ is, ____ is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(11)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246- (1) Previous contracts and compliance. The offeror represents that- (i) It ___ has, ___ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It ___ has, ___ has not filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that- (i) It ___ has developed and has on file, ___ has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or (ii) It ___ has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products: Line Item No. _____________________________________________ Country of Origin:_________________________________________ (List as necessary) (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g)(1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin _________________ _________________ __________________ __________________ __________________ __________________ (List as necessary) (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products Line Item No. ______________________________ Country of Origin:__________________________ (List as necessary) (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No.____________________________ _________________________________________ _________________________________________ (List as necessary) (3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian or Israeli End Products: Line Item No. _________________ _________________ _________________ Country of Origin _________________ _________________ _________________ (List as necessary) (g)(4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin _________________ _________________ _________________ _________________ _________________ _________________ (List as necessary) (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements". (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products: Line item No.: _________________________________ Country of origin: _____________________________ (List as necessary) (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals- (1) ___ Are, ___ are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) ___ Have, ___ have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: Commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or Commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property, (3) ___ Are, ___ are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). (The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).) (1) Listed end products. Listed End Product: _______________ Listed Countries of Origin: _______________ (2) Certification. (If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.) __ (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. __ (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (4) ___ Have, ___ have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. ? 6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. ? 6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. ? 6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. 362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). (The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).) (1) Listed end products. Listed End Product [ ] [ ] Listed Countries of Origin [ ] [ ] (2) Certification. (If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.) ___ (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. ___ (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) ___ In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) ___ Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Labor Standards. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) (The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.) (1) [ ] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror ___ does ___ does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. (2) [ ] Certain services as described in FAR 22.1003-4(d)(1). The offeror ___ does ___ does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). [ ] TIN: ___________________. [ ] TIN has been applied for. [ ] TIN is not required because: [ ] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; [ ] Offeror is an agency or instrumentality of a foreign government; [ ] Offeror is an agency or instrumentality of the Federal Government. (4) Type of organization. [ ] Sole proprietorship; [ ] Partnership; [ ] Corporate entity (not tax-exempt); [ ] Corporate entity (tax-exempt); [ ] Government entity (Federal, State, or local); [ ] Foreign government; [ ] International organization per 26 CFR 1.6049-4; [ ] Other ___________. (5) Common parent. [ ] Offeror is not owned or controlled by a common parent; [ ] Name and TIN of common parent: Name ____________________. TIN _____________________. (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations- (1) Relation to Internal Revenue Code. An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code 25 U.S.C. 7874. 2) Representation. By submission of its offer, the offeror represents that- (i) It is not an inverted domestic corporation; and (ii) It is not a subsidiary of an inverted domestic corporation. (o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran. (1) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (2) Representation and certifications. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror- (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and (iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,000 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf). (3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its postacceptance rights (1) Within a reasonable time after the defect was discovered or should have been discovered; and (2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item. (b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract. (c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties. (d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. (e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. reference. (f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence. (g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include- (i) Name and address of the Contractor; (ii) Invoice date and number; (iii) Contract number, contract line item number and, if applicable, the order number; (iv) Description, quantity, unit of measure, unit price and extended price of the items delivered; (v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading; (vi) Terms of any discount for prompt payment offered; (vii) Name and address of official to whom payment is to be sent; (viii) Name, title, and phone number of person to notify in event of defective invoice; and (ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract. (x) Electronic funds transfer (EFT) banking information. (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract. (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer-System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management), or applicable agency procedures. (C) EFT banking information is not required if the Government waived the requirement to pay by EFT. (2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315. (h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

Z--Repair Sinkhole At Decon Shed

Department of Veterans Affairs, Network Contracting Office 4 | Published June 28, 2016  -  Deadline July 8, 2016
cpvs

The Department of Veterans Affairs Medical Center, Lebanon, PA requires the renovation of existing space to "Repair Sinkhole at Decon Shed" on the exterior campus of the Lebanon VA Medical Facility. The contractor shall perform the work in accordance with the plans and specifications. Project Number 595-16-502. The contractor shall provide all necessary labor, material, tools, supervision, equipment, permits, testing and reports in accordance with all federal, state and local codes and regulations. The magnitude of this VA construction project is estimated to be between $100,000 and $250,000. Period of Performance will be approximately 60 calendar days after issuance of Notice to Proceed. All work on this project must be accomplished between 8 AM and 4:30 PM Monday through Friday. Set-Aside Information: This solicitation is to be issued as a 100% service-disabled veteran small business set aside (SDVOSB). The firm must be small business under relevant North American Industrial Classification Standard (NAICS) code and the must be registered and current in the following websites: www.ccr.gov and www.vetbiz.gov . Offerors must ensure registrations in these websites are not expired and are correct, current and valid. The NAICS code for this project is 238910 - Site Preparation Contractors, and the small business size standard is $15.0 Million. A pre-proposal conference and site visit will not be held due to suspense. The solicitation documents will be posted at the Federal Business Opportunities website (http://www.fbo.gov) on or about July 1, 2016. Questions should be addressed to Phil Helmer, Contracting Officer, Veterans Affairs Medical Center, 1111 East End Blvd., Wilkes Barre, PA 18711, Phillip.Helmer@va.gov and reference the solicitation & project number in the subject line. This procurement is subject to the availability of funds. ** NOTE: ALL PROSPECTIVE OFFERORS MUST BE REGISTERED AND CERTIFIED IN VETBIZ AS A CERTIFIED SDVOSB IN ORDER TO BE CONSIDERED FOR AWARD (CLASS DEVIATION VAAR 804.1102 VIP DATABASE).

Z--Facade Corrections Project # 595-12-104

Department of Veterans Affairs, Network Contracting Office 4 | Published April 13, 2016  -  Deadline May 26, 2016
cpvs

The Department of Veterans Affairs Medical Center, Lebanon, PA requires "Façade Corrections" for designated areas of Buildings 1 and 17 at the Lebanon VA Medical Facility. The contractor shall perform the work to repair and replace brick, limestone, coping stone, louvers, lintels and windows in accordance with the plans and specifications. Project Number 595-12-104 includes de-construction, demolition, masonry cleaning, louvers and windows, sealant, brick point, scaffolding erection, and associated structural components. The contractor shall provide all necessary labor, material, tools, supervision, equipment, permits, testing and reports in accordance with all federal, state and local codes and regulations. The magnitude of this VA construction project is estimated to be between $1,000,000 and $2,000,000. Period of Performance will be approximately 365 calendar days after issuance of Notice to Proceed. All work on this project must be accomplished between 8 AM and 4:30 PM Monday through Friday. Set-Aside Information: This solicitation is to be issued as a 100% service-disabled veteran small business set aside (SDVOSB). The firm must be small business under relevant North American Industrial Classification Standard (NAICS) code and the must be registered and current in the following websites: www.sam.gov and www.vetbiz.gov . Offerors shall ensure registrations in these websites are not expired and are correct, current and valid. The NAICS code for this project is 236220 - Commercial and Institutional Building Construction, and the small business size standard is $36.5 Million. A pre-proposal conference and site visit will be held within two weeks after issuance of the solicitation. The exact date/time/location of the conference will be specified in the solicitation. The solicitation documents will be posted at the Federal Business Opportunities website (http://www.fbo.gov) on or about 28 Apr 2016. Questions should be addressed to Phil Helmer, Contracting Officer, Veterans Affairs Medical Center, 1111 East End Blvd., Wilkes Barre, PA 18711, Phillip.Helmer@va.gov and reference the solicitation & project number in the subject line. This procurement is subject to the availability of funds.

65--THOMPSON RETRACTOR TOOLS

Department of Veterans Affairs, Network Contracting Office 4 | Published May 23, 2016  -  Deadline May 26, 2016
cpvs

The Lebanon VAMC has a requirement for Thompson Retractor Tools. The solicitation number is VA-244-16-Q-1104 and it is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-82. The associated North American Industrial Classification System (NAICS) code for this procurement is 339112 with a small business size standard of 500.00 employees. Successful offer will be the one that provides the Lowest Price Technically Accepted (LPTA). Please read the entire solicitation. Offerors are responsible for all terms, clauses, and conditions contained therein. This solicitation is set aside for Service Disabled Veteran Owned Small Businesses (SDVOSB) and requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Offer MUST be good for 30 calendar days after submission Quotes shall be submitted by email to Ronald Kline (Ronald.Kline@VA.Gov). Quotes are due by 3:00 PM, Eastern Time, on Thursday, 05-26-2016. FOB Destination CONUS (Continental U.S.) Shipping charges shall be included in the purchase cost of the products. Sellers shall deliver the products on the own conveyance to the location listed on the purchase order. No partial shipments unless otherwise specified at time of order. Please see attachment for details.

Z--Repair Building 17 Door #595-16-501

Department of Veterans Affairs, Network Contracting Office 4 | Published May 11, 2016  -  Deadline May 25, 2016
cpvs

The Department of Veterans Affairs Medical Center, Lebanon, PA requires the renovation of existing space to "Repair Building 17 Door" of Building 17 of the Lebanon VA Medical Facility. The contractor shall perform the work in accordance with the plans and specifications. Project Number 595-16-501. The contractor shall provide all necessary labor, material, tools, supervision, equipment, permits, testing and reports in accordance with all federal, state and local codes and regulations. The magnitude of this VA construction project is estimated to be between $25,000 and $100,000. Period of Performance will be approximately 75 calendar days after issuance of Notice to Proceed. All work on this project must be accomplished after VA working hours. Set-Aside Information: This solicitation is to be issued as a 100% service-disabled veteran small business set aside (SDVOSB). The firm must be small business under relevant North American Industrial Classification Standard (NAICS) code and the must be registered and current in the following websites: www.ccr.gov and www.vetbiz.gov . Offerors must ensure registrations in these websites are not expired and are correct, current and valid. The NAICS code for this project is 236220 - Commercial and Institutional Building Construction, and the small business size standard is $36.5 Million. A pre-proposal conference and site visit will not be held. The solicitation documents will be posted at the Federal Business Opportunities website (http://www.fbo.gov) on or about May 18, 2016. Questions should be addressed to Phil Helmer, Contracting Officer, Veterans Affairs Medical Center, 1111 East End Blvd., Wilkes Barre, PA 18711, Everett.Shaver@va.gov. and reference the solicitation & project number in the subject line. This procurement is subject to the availability of funds. ** NOTE: ALL PROSPECTIVE OFFERORS MUST BE REGISTERED AND CERTIFIED IN VETBIZ AS A CERTIFIED SDVOSB IN ORDER TO BE CONSIDERED FOR AWARD (CLASS DEVIATION VAAR 804.1102 VIP DATABASE).

C--Renovate Bldg 22 #595-15-201

Department of Veterans Affairs, Network Contracting Office 4 | Published April 12, 2016  -  Deadline May 12, 2016
cpvs

1. CONTRACT INFORMATION: General. This A-E Services contract is being procured in accordance with FAR 36 Construction and Architect Contracts. All submissions will be evaluated in accordance with the evaluation criteria. A "short list" of three or more firms deemed most highly rated after initial source selection will be chosen for interviews. The Government will not pay, nor reimburse, any costs associated with responding to this request. The Government is under no obligation to award a contract as a result of this announcement. Firms will be selected based on demonstrated competence and qualifications for the required work. The magnitude for construction of this project is between $2m and $5m. Before a service disabled veteran owned small business (SDVOSB) is proposed as a potential contractor, they must be certified by VETbiz and registered in the System for Award Management (SAM) database. Register via the SAM internet site at www.sam.gov Failure of a proposed SDVOSB to be certified by the CVE at the time the SF 330 is submitted shall result in elimination from consideration for award. The proposed services will be obtained by a Negotiated Firm-Fixed Price Contract. 2. PROJECT INFORMATION: Provide a full set of construction documents for a project that will renovate an area of Building 22 for a state of the art education center and associated support spaces. A maximum of 13,000 Gross Square Feet will be addressed by this design. The construction will be planned for 2 phases, allowing for operations to continue in the building. An elevator will be added to the Building. All designs will be compliant with space criteria referenced in VA space planning criteria. http://www.cfm.va.gov/til/space.asp. A/E is responsible for providing certified industrial hygiene services to perform asbestos survey investigations, bulk sampling, development of specifications and drawings, and construction period services. The VA can provide the most recent Asbestos inspection conducted. All designs shall be accomplished in accordance with VA guidelines and specifications, and program guides PG-18-1 thru PG-18-17, which are available on the Internet at http://www.cfm.va.gov/til/ .A/E shall pay particular attention to USAF, NFPA, BOCA, VA space criteria - http://www.cfm.va.gov/til/space.asp. All designs will be compliant with VA's design criteria as well as ASHRAE design guide http://www.cfm.va.gov/til/. If shutdowns are required during construction, a full shutdown plan must be included in the design. Shutdowns plan needs to include what particular energy source to shut off (breaker, valve, etc.) and what area, outlets, utilities and/or equipment the shutdown affects. The specific name of the shut off of the energy source must be identified, for example: "panel H1L1, breaker 2" for electric or "Valve 3-f" for a water source, etc. Drawings and a written narrative will be required. A LEED Silver Rating is desired with the construction. A rating will not be sought, but practices will reflect LEED Silver requirements. Proof of possible LEED credits must be provided. Bid Alternates/Deducts will be designed into the project to decrease the price of the project 20%. 3. SELECTION CRITERIA: Selection criteria for this acquisition are listed below in descending order of importance. (1) Team proposed for this project; a. Background of the personnel b. Project Manager c. Other Key Personnel (Certified Industrial hygienist) d. Consultants (2) Proposed Management Plan a. Team organization b. Design Phase c. Construction Phase (3) Previous Project Experience of Proposed Team Project Experience (4) Response Time. a. Prime Firm b. Consultants (5) Specialized Experience and Technical Competence a. Architectural, structural, environmental, electrical, plumbing and mechanical design b. Interior design. (6) Project Control; a. Techniques planned to control the schedule and costs b. Personnel responsible for schedule and cost control (7) Miscellaneous Experience and Capabilities: a. Experience in healthcare clinical design b. Experience with VA patient-centered care or Planetree philosophy c. Experience using evidence based design for interior features to promote healing environments d. Experience in ADA e. Experience in NFPA 101 Life Safety code f. LEED certification g. Energy conservation h. Industrial Hygienist ? 4. SUBMITTAL REQUIREMENT: This project is set aside under VAAR 852.219-10, VA Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (Dec 2009), and all original SF330 packages shall be submitted to: Lebanon VA Medical Center ATTN: Michael Shull Contracting Bldg. 19, RM110 1700 South Lincoln Ave Lebanon PA, 17042 All SF330 submissions shall be clearly marked with the subject line displaying the solicitation number. (a) Interested firms having the capabilities to perform this work must submit one hardcopy of SF 330 (3/2013 Edition) including Parts I and II as described herein and one CD-ROM of the SF 330 submittal as a single pdf file, to the above address not later than 3:00 p.m. local on the response date as above. Late proposal rules found in FAR 15.208 will be followed for late submittals. Responding firms must submit a copy of the originally signed, or current (signed within the past 12 months), and accurate SF 330, Part II for the specific prime, other offices of the prime, and subcontractor offices proposed to perform the work even if an SF 330, Part II is already on file. SF 330, Part II shall be provided for the specific prime, other offices of the prime, and subcontractor offices proposed to perform the work. All Part IIs shall be signed with original signature or facsimile of the original signature (signed within the past 3 years is required) and dated. A copy of a signed/dated Part II is acceptable. Although firms are encouraged to update their SF 330 Part II at least annually, older ones (up to 3 years old in accordance with FAR 36.603(d)(5) will still be considered by the board. However, a firm may be recommended as not qualified or ranked low if missing, confusing, conflicting, obsolete or obscure information prevents a board from reasonably determining that a firm demonstrates certain required qualifications. Indicate in Block 5b of each Part II if the firm is a Large Business, Small Business, HubZone, Service Disabled Veteran-Owned Small Business, Veteran-Owned Small Business, or Woman-Owned Small Business. Submit only one SF 330, Part I from the Prime for the design team, completed in accordance with the SF 330 instructions and additional instructions herein. It must contain information in sufficient detail to identify the team (prime, other offices of the prime, and consultants) proposed for the contract. (b) The A-E shall not include company literature with the SF 330. (c) In block No. 4 Part II provide the Data Universal Numbering System (DUNS) number issued by Dun and Bradstreet Information System (1/866-705-5711) for the prime A-E or Joint Venture. The DUNS number must be for the firm or joint venture performing the work (i.e. not the parent DUNS number, but a DUNS number specifically for the office performing the work). (d) In Section C of the SF 330, Part I, identify the discipline/service to be supplied by the Prime, Prime Branch offices as applicable, and each consultant. Provide brief resumes in Section E of the on-staff or consultant employees anticipated to perform the work. Resumes shall be submitted for each employee required to meet the minimums stated above in paragraph 3b. Resumes shall not exceed one page. (e) In Section F, a maximum of 10 projects for the total proposed Team (including the prime and consultants) shall be provided. Use no more than one project per page. (f) In Section G, block 26, include the name and their associated firm and office location. The names of all individuals included in the resumes in Section E shall be listed in Block G-26 along with their firm location and their roles even if example project experience in Block G-28 is not applicable. Also include Team Project Organization Chart in Part I, Section D indicating how each firm on the proposed team (prime, applicable prime branch offices, and each subcontractor as identified in Part I, Section C) integrates into the composite team. (g) In Section H, of the SF 330, Part I, provide a narrative to address each of the requirements, including subparagraphs, of items listed in Section 3, Selection Criteria, of this announcement. (h) In Section H, Part I, SF 330, firms must show their last 12 months of Medical facility contract awards stated in dollars (see 3I above), provide an itemized summary of awards to include Agency Contract Number/Task Order No. awards shall be shown in an itemized summary including Agency, Contract Number/Task Order No., Project Title, and Award Amount dollars. Include a total of all listed awards. Note that award of Indefinite Delivery Contracts should not be counted as award amounts; only actual Task Orders and any modifications thereto should be included in the amounts. When addressing Team capabilities, clarify planned capability, existing capability, and prior experiences, if any. Include any other relevant information including a short discussion of why the firm is especially qualified based upon the specific selection criteria listed in Section 3. (i) In Section H, Part I, SF 330 Generally, describe the firm's Design Quality Management Plan (DQMP). A project-specific detailed DQMP must be prepared and approved by the Government as a condition of contract award, but is not required with this submission. Indicate the estimated percentage involvement of each firm on the proposed team. Do not exceed ten pages for Section H. Front and back side use of a single page will count as 2 pages, and use no smaller than 11 font type using Times New Roman. Pages in excess of the maximums list will be discarded and not used in evaluation of the selection criteria. Foldouts are not allowed and shall not be considered. (j) Personal visits and phone calls to the facility to discuss this announcement will not be allowed. 5. THIS IS NOT A REQUEST FOR PROPOSAL. This is a request for SF 330's Architect/Engineer Qualifications packages only. Any requests for a solicitation will not receive a response. No material will be issued and no solicitation package or bidder/plan holder list will be issued. A solicitation will only be issued to the most highly qualified vendor. Point of Contact: Contracting - Michael Shull, 717-272-6621 x3896, E-mail questions to: Michael.Shull@va.gov End of Document

Replacement of floor finish in Culinary

Department of Labor, Employment Training Administration | Published March 17, 2016  -  Deadline April 1, 2016
cpvs

  This is a Procurement Opportunity with Adams and Associates at the Kittrell Job Corps Center and not with the Federal Government.    Install new floor finish in main kitchen per manufacturer's requirements, local codes, IBC, and OSHA.  Contractor shall provide a one year materials and labor guarantee along with a manufacturer's warranty.  The warranty shall be submitted to the operator prior to contractor receiving final payment.  Contractor shall provide dumpster, placement of dumpster shall be determined at the preconstruction meeting.  Contractor shall keep premises clean of debris at all times.  The contractor shall verify all conditions prior to starting project.   Remove all equipment from kitchen so floor can be installed.   Remove old flooring system in kitchen, servicing line and dish wash room.   Contractor shall abrasive clean floor to ensure that the surface is free of all oil, grease, moisture, dirt, and other contaminants.   Treat cracks and joints prior to installing new flooring system.   Install a new high performance, chemical resistant, aliphatic polyester urethane blended ¼" epoxy system, with a low VOC of 250 grams per liter to comply with industrial maintenance coating guidelines.   Floor will be turned up wall by at least 4".   Reinstall equipment when floor is dry and ready.

INDEFINITE DELIVERY (IDIQ) TYPE ARCHITECT ENGINEER (A-E) CONTRACT FOR THE VERMONT NATIONAL GUARD IN SUPPORT OF THE AIR AND ARMY NATIONAL GUARD PROGRAMS THROUGHOUT THE STATE OF VERMONT

Department of the Army, National Guard Bureau | Published March 1, 2016  -  Deadline April 1, 2016
cpvs

CONTRACT INFORMATION: The Vermont National Guard is soliciting for Non-Personal Architect-Engineer (A-E) Services in accordance with Public Law 92-582 (Brooks Act) and Federal Acquisition Regulation (FAR) Part 36. This announcement is Unrestricted and open to all businesses regardless of size pursuant to DFAR 219.502-1. The North American Industry Classification System (NAICS) code for this action is 541310. The Small Business size standard is $7.5 M. Small businesses are encouraged to team with other businesses. The A-E firm must be capable of responding to and working on multiple task orders concurrently. As a result of this announcement, the Vermont National Guard intends to award a single Indefinite Delivery Indefinite Quantity (IDIQ) contract to provide A-E services in support of Air National Guard (ANG) and Army National Guard (ARNG) mission requirements. These are not requirements contracts. These contracts will consist of a Base Award Period of two (2) years, and three (3) one-year option periods. Total contract period, to include options, shall not exceed five (5) years. The total of individual task orders placed against each contract, base period and all exercised options, shall not exceed $10,000,000.00 to anyone A-E contract. The minimum total fee guaranteed to each contract awardee is $2,000.00, within the base period of two (2) years. There is no guaranteed minimum for the option years. Work will be issued by negotiated firm-fixed price task orders. Task orders will be primarily for projects with a construction value that typically result in a A/E task order less than $500K; however, as required, larger task orders may be executed under this contract up to $750K. Projects to be designed are not yet determined and funds are not presently available. Selection of A-E firms is not based upon competitive bidding procedures, but rather upon the professional qualifications necessary for the performance of the required services. All A-E firms are cautioned to review the restrictions of FAR 9.5 Organizational and Consultant Conflicts of Interest and 36.209 Construction Contracts with Architect-Engineer Firms. Any A-E firm that prepares a Design-Build Request for Proposal for a particular project will be restricted from participating in any contract or task order for the Design-Build of that particular project. All interested Architect-Engineers are reminded that, in accordance with the provisions of PL 95-507, they will be expected to place subcontracts to the maximum practicable extent consistent with the efficient performance of the contract with small and small disadvantaged firms. Large business firms that intend to pursue an IDIQ contract must convey their intent to meet the minimum small business goals on the SF 330, Section C. by identifying subcontracting opportunities with small businesses. If selected, the large business offeror will be required to submit a Small Business Subcontracting Plan in accordance with FAR 52.219-9 and DFARS 219.704/705 as a part of the Request for Proposal Package. The National Guard subcontracting goals are as follows: a minimum of 14% of the contractor's intended subcontract amount be placed with small businesses (SB), 3.0% be placed with small disadvantaged businesses (SDB), 5% be placed with women-owned small businesses (WOSB), 1.0% be placed with HUB Zone small business, 3% be placed with Veteran-Owned Small Business, and 6.5% be placed with Service-Disabled Veteran-Owned Small Business. The subcontracting plan is NOT required with this submittal. The wages and benefits of service employees (FAR 22.10) performing under this contract must be at least equal to those determined by the Department of Labor under the Service Contract Act. PROJECT INFORMATION: A-E services shall include, but not be limited to performance of planning, master planning, and program support; A-E investigative and design services including development of construction documents; construction support; engineering and environmental studies, National Environmental Policy Act (NEPA) documentation; investigations and surveys in support of the Air and Army National Guard Programs. Typical work may include, but is not specifically limited to: A: the preparation of plans, specifications, calculations, and cost estimates; B: the development of cost management, quality control and quality assurance plans; C: construction inspection, testing and management services; D: development of engineering standards; E: preparations for national design submissions; F: technical, economic, planning, environmental, value engineering and other studies, analyses, surveys, investigations, and reports; G: development of performance criteria for bridging documents for design build projects; H: development of documents to support various government construction programs; I: providing technical support for source selection procurement processes; J: commissioning services; K: comprehensive interior design; and L: provision of program management services. Services may include, but are not limited to, a wide variety of professional services in support of projects for administrative, industrial, and support facilities to meet the needs of the National Guard. Various projects may include services associated with National Guard installations/facilities, such as aircraft hangars, aircraft maintenance facilities, vehicle maintenance facilities, support equipment maintenance facilities, administrative offices, supply facilities, civil engineering facilities, dormitory buildings, training site facilities, readiness centers (armory), fire stations, security forces facilities, munitions maintenance and storage facilities, communications and electronic maintenance, mobility and aerial port facilities, dining facilities, medical training facilities, roadways, military airfield pavements, site utilities, infrastructure, aircraft fuel storage and distribution systems, and other support facilities. Additionally, task orders may be issued for support services which require A-E Services as defined in FAR 2.101 SELECTION CRITERIA: The selection criteria are listed below in descending order of importance (first by major criterion and then by each sub-criterion). (A) Professional Qualifications necessary for satisfactory performance of required services; the selected firm must have, either in-house or through consultants, the following disciplines, with registration required where applicable: (1) Architect; (2) Civil Engineer including Sanitary Engineer; (3) Mechanical Engineer; (4) Electrical Engineer; (5) Structural Engineer; (6) Fire Protection Engineer (BS or MS in fire protection engineering from accredited institution, PE registration in related relevant field, NCEE or other qualifications as allowed by DoD Unified Facilities Criteria (UFC 3-600-01 Change 3, 01 March 2013, Chapter 1-5); (7) Communications Specialist; (8) Geotechnical Engineer; (9) Environmental Engineer; (10) Surveyor; (11) Cost Estimator; (cost engineering specialist(s) must be certified by a professional organization, such as AACE, ICEC, and PCEA. The firm's and/or consultant's Cost engineering or estimating specialist(s), must be specifically identified and his (their) competence indicated by resume(s). If an individual will serve in more than one discipline then those disciplines shall be clearly indicated in Block 13, PART I, Section E.) Resumes (Block E of the SF 330) must be provided for all disciplines, including consultants. In the resumes under Project Assignments, use the same discipline nomenclature as is used in this announcement. The evaluation will consider education, training, registration, relevant experience in the type work required, and longevity with the firm. (B) Specialized Experience and Technical Competence in the type of work required, including, as appropriate, experience in sustainable design, energy conservation, pollution prevention, waste reduction, and the use of recovered materials; (1) Experience in design of military projects, including production of programming documents, plans and specifications. (2) Design of government and commercial facilities. (3) Experience using automated cost estimating systems (Such as PACES). (4) Sustainable design experience utilizing the Leadership in Energy and Environmental Design (LEED) rating tools. (Those firms that have LEED certified projects, LEED registered projects, LEED accredited professionals, and show experience in the LEED design/certification process will be rated more favorably. It is strongly encouraged that all disciplines have at least one LEED Accredited Professional on the design team). (5) Technical Competence & Experience using DOD UFC and associated UFGS; (6) Technical competence and experience using the International Building Code (IBC); (7) Design and construction experience conforming to Department of Defense Antiterrorism/Force Protection Construction Standards and DOD Unified Facilities Criteria (UFC 4-010-01); (8) Engineering experience in preparing permit applications relating to construction projects with the various permitting agencies; (9) Performance of surveying and mapping in accordance with A/E/C CADD Standards and nondestructive techniques for locating underground utilities; (10) Experience with automated design tools such as CADD, design; (11) Demonstrate experience using project and program management tools such as Primavera, Expedition, SharePoint or similar systems; (12) Demonstrate experience in evaluating contractor's submittals and performing construction surveillance; (13) Demonstrate the ability to prepare supporting comprehensive master planning maps and plans using the latest versions of ESRI and ArcGIS; (14) Demonstrate experience with preparing the technical portions of a Design Build Request for Proposal package for performance based design build; (15) Demonstrate experience in design and survey for abatement of asbestos, lead-based paint, and the handling/disposal of other toxic and regulated substances; (16) Demonstrate experience with NEPA, it's process and requirements as well as preparation of required documentation; (17) In Block H of the SF 330 describe the firm's quality management plan, including quality assurance process, project design-to-cost control, coordination of the in-house work with consultants, and prior experience of the prime firm and any significant consultant. To be considered relevant, all experience demonstrated shall be within five years of the date of this solicitation. (C) Capacity to accomplish multiple task orders in the required time; the capacity to accomplish at least four individual task orders, for task orders valued at less than $500K, simultaneously (or greater) will receive additional consideration. (D) Past Performance on contracts with government agencies and private industry in terms of cost control, quality of work, compliance with performance schedules and customer satisfaction; evaluations will be based on established ACASS ratings, personal knowledge of Agency members and other credible documentation included in the SF 330. (E) Location. Firms should have knowledge of the general geographical area of Chittenden County which encompasses the three predominant project locations of Camp Johnson in Colchester, Camp Ethan Allen Training Site in Jericho and Vermont Air National Guard Base in South Burlington, as well as other areas throughout the State of Vermont along with recent experience with state laws. (F) Volume of DoD Work will be considered. (G) Small Business Participation: Extent of planned participation of with small businesses (SB), small disadvantaged businesses (SDB), women-owned small businesses (WOSB), HUB Zone small business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business in the proposed contract team, measured as a percentage of the total estimated subcontracted effort. SUBMISSION REQUIREMENTS: Interested Architect-Engineer firms having the capabilities to perform this work are invited to submit two (2) completed and bound paper copies, and one (1) electronic Copy (CD) of their SF 330 (Architect-Engineer Qualifications) to: Contracting Officer, USPFO-VT Purchasing & Contracting, Bldg #3 Camp Johnson, 789 Vermont National Guard Road, Colchester, VT 05446-3099. SF 330, 6/2004 edition, must be used, and may be obtained from the Government Printing Office or from the following web site: http://www.gsa.gov/portal/forms/download/116486. Include DUNS number in Block 5 of the SF 330 PART I, Section B. Firms located within the United States may obtain a DUNS number by calling Dun and Bradstreet at 1-888-253-1546 or via the Internet at http://www.dnb.com/. If the firm is located outside the United States, the local Dun and Bradstreet office should be contacted. All fonts shall be at least 10 pitch or larger. Pages shall be 8-1/2 inches by 11 inches. PART I OF THE SF 330 SHALL NOT EXCEED 75 PAGES. The Organization Chart required in Section D and the Matrix required as Section G, PART I of the SF 330 may be presented on a sheet up to 11 inches by 17 inches. If an 11 inch by 17 inch sheet is used it shall be neatly folded to 8-1/2 inches by 11 inches, bound in the SF 330 at the proper location, and counted as one page. Blank sheets/Tabs separating the sections within the SF 330 will not count in the page-count maximum for PART I. A maximum of ten (10) projects including the prime and consultants will be reviewed in PART I, Section F. Resumes in Section E and example projects in Section F shall not exceed one page each. Indicate in Section C.11 if the prime has worked with the team members in the past five years. When listing projects in PART I, Section F an Indefinite Delivery Contract (IDC) or IDIQ contract with multiple Task Orders as an example, is not considered a project. A task order executed under an IDC/IDIQ contract is a project. In Block G-26, along with the name, include the firm with which the person is associated. A Part II is required for each branch office of the Prime Firm and any Subcontractors that will have a key role in the proposed contract. This is not a request for proposal. NOTE: To avoid a conflict of interest, any contractor proposing as a prime may not have a subcontractor who is also proposing as a prime.Solicitation packages shall not be provided. Submittals must be received no later than 3:00 P.M. Eastern Time on 1 April 2016. Regulation requires that the Selection Board not consider any submittals received after this time and date. Late proposal rules in FAR 15.208 will be followed for submittals received after 3:00 P.M. Eastern Time on the closing date specified in this announcement. As required by acquisition regulations, interviews for the purpose of discussing prospective contractors' qualifications for the contracts will be conducted only for those firms considered most highly qualified after submittal review by the selection board. Interviews will be in person and will be scheduled approximately 90 days after receipt of submittal packages. All questions shall be in writing as outlined below. Phone calls and personal visits for the purpose of discussing this solicitation with ANG or ARNG contracting/project management and or engineering personnel are not allowed. To verify your proposal has been delivered, you may e-mail james.a.belaski.civ@mail.mil. To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instructions on registering with SAM, please see the SAM website at https://www.sam.gov/portal/public/SAM. Hand delivered proposals will be accepted, however, coordinate with Mr. James A. Belaski at 802-338-3186 or james.a.belaski.civ@mail.mil to coordinate access onto Camp Johnson. SUBMIT QUESTIONS ONLY TO: james.a.belaski.civ@mail.mil and joyce.l.merrill.mil@mail.mil . No phone questions will be honored. Questions will be answered in writing and posted to a Questions and Answer document and posted to http://www.fbo.gov starting 7 March 2016. Contractors are encouraged to view the Q&A document BEFORE sending in question as it may already be answered.

Replacement of floor finish-Main Kitchen

Department of Labor, Employment Training Administration | Published March 17, 2016  -  Deadline March 31, 2016
cpvs

This is a Procurement Opportunity with Adams and Associates at the Kittrell Job Corps Center and not with the Federal Government.  Install new floor finish in main kitchen per manufacturer's requirements, local codes, IBC, and OSHA.  Contractor shall provide a one year materials and labor guarantee along with a manufacturer's warranty.  The warranty shall be submitted to the operator prior to contractor receiving final payment.  Contractor shall provide dumpster, placement of dumpster shall be determined at the preconstruction meeting.  Contractor shall keep premises clean of debris at all times.  The contractor shall verify all conditions prior to starting project.   Remove all equipment from kitchen so floor can be installed.   Remove old flooring system in kitchen, servicing line and dish wash room.   Contractor shall abrasive clean floor to ensure that the surface is free of all oil, grease, moisture, dirt, and other contaminants.   Treat cracks and joints prior to installing new flooring system.   Install a new high performance, chemical resistant, aliphatic polyester urethane blended ¼" epoxy system, with a low VOC of 250 grams per liter to comply with industrial maintenance coating guidelines.   Floor will be turned up wall by at least 4".   Reinstall equipment when floor is dry and ready.

Park Cleaning John Redmond Reservoir

Department of the Army, U.S. Army Corps of Engineers | Published March 14, 2016  -  Deadline March 28, 2016
cpvs

Pre-solicitation NoticePark Cleaning John Redmond Reservoir W912BV-16-R-01061. This is a Combined Synopsis solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and additional notice will not be issued. This Acquisition shall be set aside for Small Business. 2. SolicitationW912BV-16-R-0106 is being issued as a Request for Proposal (RFP) for a Firm-Fixed-Price contract for park cleaning services at John Redmond Reservoir, KS. 3. This notice and the incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2005-76. 4. This is a 100% Small Business Set Aside. The North American Industrial Classification System (NAICS) Code is 561720 and the applicable Small Business Size Standard, as established by the U.S. Small Business Administration, is $18,000,000. 5. Bid Schedule - See attachment 6. Description of services: The required services provides for park cleaning at John Redmond Reservoir, KS 7. The contract will consist of a base and four option periods. The period of performance will be as follows: Contract period Start date End DateBase period 1 April 2016 31 March 2017Option year 1 1 April 2017 31 March 2018Option year 2 1 April 2018 31 March 2019Option year 3 1 April 2019 31 March 2020Option year 4 1 April 2020 31 March 2021 8. FAR Clauses 52.212-1, 52.212-3 and 52.212-4 apply to this procurement. For the exact text and wording of clauses and provisions please see http://farsite.hill.af.mil. The following addenda apply to these clauses: 52.212-1 - the NAICS code is listed in paragraph # 4 above as an SF 1449 will not be issued for this requirement. 9. FAR Clause 52.212-5 applies to this procurement. A completed copy is attached showing the applicable clauses. 10. Offers are due on 28 March 2016 no later than 4:00 PM CST. 11. Site visit: will be held on Friday, 18 March 2016 at 1:00 PM. CST, at the John Redmond Lake Project Office located at 1565 Embankment Road SW, Burlington, KS 66839. 12. Bidders Inquiry: Contractual and Technical inquiries and questions relating to proposal procedures are to be submitted via Bidder Inquiry in ProjNet at https://www.projnet.org/projnet. Please see attachment for additional Information. 13. Scope of Work. Please see attached instruction to Offerors for the Scope of work. 14. Price Schedule: Please see attached instruction to Offerors for the Price Schedule. 15. The solicitation is issued via Internet only on Feb Biz Opps Website at http://www.fbo.gov. It is the contractors' responsibility to check the above-listed internet address daily for any posted changes to the solicitation. Any amendments issued to the solicitation must be acknowledged by potential offerors. No corrections and/or changes to proposals will be allowed after the proposal submittal due time and date. 16. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer is conforming to the requirements of the solicitation and is the most advantages to the Government considering price. 17. Location: John Redmond Reservoir, Burlington, KS 18. Previous contract information: W912BV-11-P-0041 awarded to RCC Cleaning for a total award amount of $162,394.21 for the base and four options.

Visiting Judge's Chamber Renovation - South Bend, Indiana

General Services Administration, Public Buildings Service (PBS) | Published January 11, 2016  -  Deadline March 3, 2016
cpvs

The General Services Administration announces the solicitation for interior space alterations at the Robert A. Grant Federal Building and U.S. Courthouse, 204 S. Main Street, South Bend, Indiana. The scope of work consists of, but is not strictly limited to the following: providing offices, breakroom and toilet room to include removal of carpet, modification of existing wall base, installation of partial height partition, various new light fixture and other work as described within the scope of work. This procurement is set-aside for small business concerns. Funds are currently available. The North American Industrial Classification Code(NAICS) is 236220 with a size standard of $33 million. The estimated cost range for all work is between $ 80,000.00 and $125,000.00 dollars. This is a negotiated procurement; there will NOT be a public bid opening. The solicitation will be available on or about February 2, 2016. The solicitation cited above can only be obtained by accessing a secure website known as FedBizOpps(FBO). FedBizOpps is a secure website designed to safeguard sensitive but unclassified (SBU) acquisition information. In order to obtain information from FedBizOpps, you will first be required to register with SAM (System for Award Management) database. You may access SAM at the following URL, www.sam.gov. At time of registration, contractors will supply company Core Data, Assertions, Representations and Certifications, and Point of Contact. Once you register with SAM you will be required to register with FedBizOpps. No Federal materials can be downloaded until you have registered under both sites. Potential offerors will be responsible for downloading the solicitation and monitoring the website for amendment(s), if any to the solicitation. Offer due date and time for receipt of proposals will be on, or about March 3, 2016 by 3:00pm(CST). All offers are to be submitted to the General Services Administration, Attn: Debbie Ethell, 520 South 8th Street, Springfield, Illinois 62703. Any questions regarding this notification should be directed to the Contracting Officer whose name appears herein.