Public tenders for industrial in Portsmouth-heights United States

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!
IndustrialUnited Statesportsmouth-heights

Z--EDWOSD IDIQ Industrial Waterfront Alterations and Repairs Contract

Department of the Navy, Naval Facilities Engineering Command | Published July 11, 2014  -  Deadline August 29, 2014
cpvs

It is the Government’s intent to obtain Industrial Waterfront Alterations and Repairs Construction Services under the Public Works Department Maine area of responsibility (AOR) including, but not limited to Federal Installations Located in Maine, New Hampshire, Vermont, Massachusetts, Connecticut, Rhode Island, and New York, by means of an indefinite quantity indefinite delivery contract. Period of performance would include a base period of one year and four one-year options to be exercised at the discretion of the Contracting Officer. Work will be ordered by individual task order, DD 1155. The total value of the task orders awarded under this contract shall not exceed $6,000,000.00. The guaranteed minimum is ten thousand dollars ($10,000.00) for the life of the contract including any options exercised.

91--Diesel S15 NRLM No. 2-D, Red (Temple VA & Waco VA)

Department of Veterans Affairs, VA South Texas Health Care System | Published October 10, 2014  -  Deadline October 17, 2014
cpvs

This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and a written solicitation will not be issued. The solicitation number is VA257-15-Q-0059. This acquisition is issued as a Request for Quote (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-75, effective June 24, 2014. The associated North American Industrial Classification System Code (NAICS) for this procurement is 324199 with a small business standard of 500 employees. This acquisition is solicited as a set-aside for small business. Network Contracting Office 17 requests responses from qualified sources capable of providing the following item(s): B.2 Price/Cost Schedule Item Information ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 1 #2 Ultra Low Sulfur Diesel (Red Dye) to the Temple VA See SOW for Delivery Instructions Tank 1 - Approx 3,000 GL Tank 2 - Approx 3,000 GL Tank 3 - Approx 3,000 GL Tank 4 - Approx 3,000 GL 12,000.00 GL __________________ __________________ 2 #2 Ultra Low Sulfur Diesel (Red Dye) to the Waco VA See SOW for Delivery Instructions Tank 6 - Approx 3,000 GL Tank 7 - Approx 3,000 GL Tank 8 - Approx 3,000 GL Tank 9 - Approx 3,000 GL 12,000.00 GL __________________ __________________ GRAND TOTAL __________________ B.3 Delivery Schedule ITEM NUMBER QUANTITY DELIVERY DATE 1 SHIP TO: Central Texas Veterans HCS Olin E. Teague Veterans' Medical Center 1901 Veterans Memorial Drive Temple ,TX 76504 7451 12,000.00 MARK FOR: Chris Sebek Christopher.Sebek@va.gov 254-534-0261 2 SHIP TO: Waco VA Medical Center 4800 Memorial Drive Waco ,TX 76711 1329 12,000.00 MARK FOR: Joseph Clark Joseph.Clark2@va.gov (254) 379-8139 ? STATEMENT OF WORK 1. REQUIRMENT: The fuel to be provided shall be Fuel Oil, Combustible Liquid III Diesel S15 NRLM No. 2-D, Red 2. DELIVERY LOCATIONS: Temple VA Medical Center 1901 Veterans Memorial Drive Temple TX 76504 Building 58, Temple Department of Veterans Affairs Facility Above ground tanks Minimum of 100 feet of hose required 4 inch connection Note: A bobtail load is preferred for the Temple location due to space restraints around a few tanks. Waco VA Medical Center 4800 Memorial Drive Waco TX 76711 Building 14, Waco Department of Veterans Affairs (VA) Facility Below Ground Tanks Minimum of 100 feet of hose required 4 inch connection 3. FUEL DELIVERY COORDINATION EFFORT: Delivery may be made between the hours of 0800 to 1600 hours from Monday through Friday, not on United States Govt. Federal Holidays. The point of contact and Contract Office Representative (COR) will be Nelson Gonzalez at telephone number 254-743-1529 and Thomas G. Izbrand at telephone number 254-534-1061 or 254-743-1559. Deliveries to be made on an on-call basis by the COR who will monitor the not to exceed funding. 4. REQUIRED DELIVERY DOCUMENTS: Contractor must supply two copies of the delivery ticket of the bill of landing to the contract COR or designee. The delivery quantity shall be verified against the metered readings of the pump truck. In the event the requested delivered quantity by the COR does not match the reading of the metered pump truck, corrections will be made in writing by the COR or designee and signed by the delivery truck driver. All prices offered for fuel shall be based on the Oil Price Information Survey (O.P.I.S). It is the contractor's burden to provide the Oil Price Information Survey for the day (12 o'clock noon Central Standard Time of day of delivery Per Attachment A. The delivery ticket shall provide the contractors name, address, type of fuel and actual delivered quantity, and purchase order number (674-AXXXX) subject to verification by the COR or designee. The VA Medical center shall only authorize payment for the actual (net) quantity delivered. In the event of a Central Texas VA Medical Center emergency the contractor must have the capability to deliver fuel within 48 hrs. 5. ESTIMATED QUANTITES: The usage quantities contained on "Attachment A" pricing are estimates only. No commitment of any kind is made concerning actual quantities acquired during the contract term. A not to exceed cost will be established upon award. All prices offered for fuel shall be based on the Oil Price Information Survey (O.P.I.S.). All prices offered shall indicate plus or minus (+ or -) O.P.I.S. All prices offered shall include cost for the delivery to designated facility storage tank locations. The Veterans Affairs shall not request a delivery less than 6,000 Gallons to any one location. 6. TECHNICAL REQUIREMENTS: Contractor shall follow all current Federal, State and local/city regulations governing the operation, transport, and delivery of fuel. For a reference of laws reference the following links: http://www.tceq.state.tx.us/implementation/air/sip/cleandiesel.html http://deldot.gov/mfta/pdf/fed_dyed_fuel_law.pdf http://nlquery.epa.gov/epasearch/epasearch?typeofsearch=area&querytext=fuel+delivery&fld=swerust1&areaname=Underground+Storage+Tanks&areacontacts=http%3A%2F%2Fwww.epa.gov%2Foust%2Foustcont.htm&areasearchurl=&result_template=epafiles_default.xsl&filter=samplefilt.hts http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&rgn=div5&view=text&node=16:1.0.1.3.30&idno=16 Delivering truck must have a method of controlling vapors while unloading into aboveground tanks. 7. FACULITY RULES: The safety of our Veterans is a key proponent to any operation taking place. Any contractor personnel involved with the delivery of the fuel shall bring NO FIREARMS onto on Veterans Affairs / Federal Property. The visible wearing of a company identification badge with name and company on it while on Veterans Affairs / Federal Property is REQUIRED. All delivery's shall be made through a specific Gate for patient and driver safety, this Gate will be defined when order is called in. 8. SPILLAGE AND CLEAN UP: The Contractor shall be responsible for cleanup of all spillage during the delivery and/or pumping process and shall take immediate action to properly contain and "clean-up" the spillage in accordance with applicable laws regulations, etc. The Contractor shall also advise our Fuel Coordinator (254-534-1061 or 254-899-6006). Clean up the spillage will be priority of work. ? ATTACHMENT A Fuel Oil, Combustible Liquid III Diesel S15 NRLM No. 2-D, Red Delivery Price will be determined using Oil Price Information Service (OPIS) - Waco, Texas + % of profit at 12 o'clock noon, Central Standard Time of day of delivery. The website is www.opisnet.com/. OPIS provides pricing for Red Dye, of Ultra low-sulfur diesel fuels. All of the OPIS Ultra Low-Sulfur diesel products are understood to include lubricity. It is understood by the Veterans Affairs that Red-dyed prices typically are 0.25 to 0.35cts higher than clear prices to recoup the charge for the dye and dying process. Total Price shall be rounded up to the second decimal point. When the fifth decimal is 1 to 4, the figure shall be rounded down, 5 to 9, rounded up. Within 48 hours contractor utilizes OPIS identifying a rack price for the OPIS Whole Sale Gross Daily Contract Rack Average for Waco Texas, published at 10:00 a.m. Eastern Standard Time. It shall be the contractors' burden to provide the Oil Price Information Survey for the day. FUEL SITES TANK CAPACITY ESTIMATED YEARLY USAGE TEMPLE TANK 1 2-30,000 Gallons 3,000 Gallons TANK 2 2-30,000 Gallons 3,000 Gallons TANK 3 2-30,000 Gallons 3,000 Gallons TANK 4 2-30,000 Gallons 3,000 Gallons WACO TANK 6 2-30,000 Gallons 3,000 Gallons TANK 7 2-30,000 Gallons 3,000 Gallons TANK 8 2-30,000 Gallons 3,000 Gallons TANK 9 2-30,000 Gallons 3,000 Gallons Delivery: 30 Days after award Delivery to the VA Central Texas Healthcare System, 1901 Veterans Memorial Drive, Temple, TX 76504. The following FAR and VAAR Clauses and provisions in their latest editions apply to this solicitation. 52.212-1, Instructions to Offerors-Commercial Items. 52.212-2, Evaluation Commercial Items. Technical acceptability to meet the Governments requirement, Past performance, delivery and price. Technical and past performance, when combined are less important than price. 52.212-3 Offeror Representations and Certifications - Commercial Items. Offerors must include a completed copy of Representations and Certifications with their offer. 52.212-4 Contract Terms and Conditions - Commercial Items. 52.204-7 Central Contractor Registration 52.219-6, Notice of Total Small Business Set-Aside 52.219-13, Notice of Set-Aside Orders 52.222-50 Combatting Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.233-3 Protest After Award 52.233-4 Applicable Law for Breach of Contract Claim The following clauses will be incorporated in full text. 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items The following clauses shall be considered marked within 52.212-5 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-6 Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. 52.222-3, Convict Labor 52.222-19, Child Labor - Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-22 Previous Contracts Compliance Report 52.222-25 Affirmative Action Compliance 52.222-26 Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration 52.219-28, Post Award Small Business Program Representation 52.252-1, Solicitation Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 52.252-2, Clauses Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 852.203-70, Commercial Advertising 852.211-70 Service Data Manuals 852.237-70 Contractor Responsibilities "Texas" shall be inserted into the fill in 852.246-70 Guarantee 852.273-74, Awards Without Exchanges The Government intends to award a firm fixed price contract resulting from this combined synopsis/solicitation. All offerors must be registered in the System for Award Management (SAM) prior to award (www.sam.gov). Quotes are being requested and a written solicitation will not be issued. Paper copies of this solicitation will not be issued and telephone requests or fax requests for the solicitation will not be accepted. Quotes must include company name, company DUNS number, and point of contact information. All responsible sources should submit quotes to Kevin Johnson via e-mail: kevin.johnson2@va.gov by Friday, October 17, 2014, 10:00 a.m. CST.

G--Religious Support

Department of the Army, FedBid | Published October 23, 2014  -  Deadline October 30, 2014
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010568363 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-77. The associated North American Industrial Classification System (NAICS) code for this procurement is 813110 with a small business size standard of $7.50M.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-10-30 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yakima, WA 98901 The MICC Joint Base Lewis McChord requires the following items, Meet or Exceed, to the following: LI 001: Religious Support Coordinator Services at YTC, POP 1 Nov 2014 - 31 Oct 2015. SEE PWS for required qualifications., 1, EA; LI 002: Contract Manpower Report IAW PWS. Reporting requirements take approximately two hours of time for one employee to complete and are generally calculated using an accepted hourly wage for an administrative assistant., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Joint Base Lewis McChord intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Joint Base Lewis McChord is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The Contracting Officer (KO) at Mission and Installation contracting Office, Joint Base Lewis-McChord is the only person authorized to approve changes or modify any of the requirements under this contract, and notwithstanding anything contained elsewhere in this contract, the said authority remains solely with the KO. In the event the Contractor or contract employee effects any such change at the direction of any person other than the KO, the change will be considered to have been without authority, and no adjustment will be made in the contract price under the Changes clause or any other clause to cover any increase in costs incurred as a result thereof. A protest to a U.S. Army Materiel Command forum is considered a ?protest to the agency?, as described in FAR 33.103. The HQAMC Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an alternative dispute resolution forum, rather than filing a protest with the Government Accountability Office or another external forum. The proper address for AMC level protests is: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or e-mail: usarmy.redstone.usamc.mbx.protests@mail.mil If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number (703) 806-8866 or 8875 Packages sent by FedEx or UPS should be addressed to: HQ Army Material Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. As prescribed in 22.1705(a), insert the following clause: COMBATING TRAFFICKING IN PERSONS (FEB 2009) (a) Definitions. As used in this clause-- Coercion means-- (1) Threats of serious harm to or physical restraint against any person; (2) Any scheme, plan, or pattern intended to cause a person to believe that failure to perform an act would result in serious harm to or physical restraint against any person; or (3) The abuse or threatened abuse of the legal process. Commercial sex act means any sex act on account of which anything of value is given to or received by any person. Debt bondage means the status or condition of a debtor arising from a pledge by the debtor of his or her personal services or of those of a person under his or her control as a security for debt, if the value of those services as reasonably assessed is not applied toward the liquidation of the debt or the length and nature of those services are not respectively limited and defined. Employee means an employee of the Contractor directly engaged in the performance of work under the contract who has other than a minimal impact or involvement in contract performance. Forced Labor means knowingly providing or obtaining the labor or services of a person-- (1) By threats of serious harm to, or physical restraint against, that person or another person; (2) By means of any scheme, plan, or pattern intended to cause the person to believe that, if the person did not perform such labor or services, that person or another person would suffer serious harm or physical restraint; or (3) By means of the abuse or threatened abuse of law or the legal process. Involuntary servitude includes a condition of servitude induced by means of-- (1) Any scheme, plan, or pattern intended to cause a person to believe that, if the person did not enter into or continue in such conditions, that person or another person would suffer serious harm or physical restraint; or (2) The abuse or threatened abuse of the legal process. Severe forms of trafficking in persons means-- (1) Sex trafficking in which a commercial sex act is induced by force, fraud, or coercion, or in which the person induced to perform such act has not attained 18 years of age; or (2) The recruitment, harboring, transportation, provision, or obtaining of a person for labor or services, through the use of force, fraud, or coercion for the purpose of subjection to involuntary servitude, peonage, debt bondage, or slavery. Sex trafficking means the recruitment, harboring, transportation, provision, or obtaining of a person for the purpose of a commercial sex act. (b) Policy. The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not-- (1) Engage in severe forms of trafficking in persons during the period of performance of the contract; (2) Procure commercial sex acts during the period of performance of the contract; or (3) Use forced labor in the performance of the contract. (c) Contractor requirements. The Contractor shall-- (1) Notify its employees of-- (i) The United States Government's zero tolerance policy described in paragraph (b) of this clause; and (ii) The actions that will be taken against employees for violations of this policy. Such actions may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment; and (2) Take appropriate action, up to and including termination, against employees or subcontractors that violate the policy in paragraph (b) of this clause. (d) Notification. The Contractor shall inform the Contracting Officer immediately of-- (1) Any information it receives from any source (including host country law enforcement) that alleges a Contractor employee, subcontractor, or subcontractor employee has engaged in conduct that violates this policy; and (2) Any actions taken against Contractor employees, subcontractors, or subcontractor employees pursuant to this clause. (e) Remedies. In addition to other remedies available to the Government, the Contractor's failure to comply with the requirements of paragraphs (c), (d), or (f) of this clause may result in-- (1) Requiring the Contractor to remove a Contractor employee or employees from the performance of the contract; (2) Requiring the Contractor to terminate a subcontract; (3) Suspension of contract payments; (4) Loss of award fee, consistent with the award fee plan, for the performance period in which the Government determined Contractor non-compliance; (5) Termination of the contract for default or cause, in accordance with the termination clause of this contract; or (6) Suspension or debarment. (f) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (f), in all subcontracts. (g) Mitigating Factor. The Contracting Officer may consider whether the Contractor had a Trafficking in Persons awareness program at the time of the violation as a mitigating factor when determining remedies. Additional information about Trafficking in Persons and examples of awareness programs can be found at the website for the Department of State's Office to Monitor and Combat Trafficking in Persons at http://www.state.gov/g/tip. Quote MUST be good for 30 days after Request for Quote closing date. Questions concerning this quote must be submitted at least 5 days prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered. The contractor shall not hire any individual to perform work on Joint Base Lewis-McChord or any other Government installation under this contract unless such individual is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. The contractor shall comply with 8 USC 1324a, 8 CFR Part 274a, and any other laws and regulations pertaining to the employment of aliens. The contractor shall, upon request by the Contracting Officer, present documentary evidence acceptable to the Contracting Officer that the employee(s) named or identified in the request is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. Such documentation shall be presented to the Contracting Officer within three (3) working days after the contractor's receipt of the request for documentation. If acceptable documentary evidence is not provided within the required time, the contractor shall not allow the affected employee(s) to perform work on Fort Joint Base Lewis-McChord or any other Government installation under this contract until after such acceptable documentary evidence is presented to the Contracting Officer. Removal of any employee(s) from performance of work pursuant to this provision shall not relieve the contractor of the responsibility to perform all work under this contract in a timely manner. Contact ClientServices @ FedBid.com or call 1-877-9FEDBID to address any questions for quotes utilizing FedBid. Contact the specialist listed in the solicitation to address any questions concerning any other request for quotes. This is a Request for Quotes under Federal Acquisition Regulation 12, Acquisition of Commercial Items using FAR 13 Simplified Acquisition Procedures. The following provisions and clauses apply: Clause Description FAR 52.212-1 Instructions to Offers I commercial Items. Incorporated by reference FAR.212-2 Evaluation-Commercial Items Incorporated by reference FAR 52.212-3 Offeror Representations and Certification- Commercial Items Incorporated in Full Text FAR 52.212-4 Contract Terms and Conditions-Commercial Items Incorporated by reference FAR 52.212-5 Contract Terms and conditions Required to Implement Statutes or Executive Incorporated in Full Text Orders-Commercial Items FAR 52.209-7 Information Regarding Responsibility Matters Incorporated by reference FAR 52.252-2: This award incorporates one or more clauses by reference, with the Clauses Incorporated same force and affect as if they were given in full text. Upon request the Contracting Officer will make their full text available. Also the full text of a clause may be accessed electronically at this address http://farsite.hill.af.mil/vffara.htm Wherever the words "offer", "proposal", "offerors", or similar terms are used in this solicitation, they shall be read to mean "quote", "quotation", "quoter", ?vendor? or similar corresponding term to reflect that this solicitation is a Request for Quotations, not a Request for Proposals or an Invitation for Bids. Quotes must be submitted per unit price. Multiple awards will not be made; therefore, quotes that cover less than all the items and quantities in this solicitation will be rejected as non-responsive. Quotes must be submitted per unit price and total price. Multiple awards will not be made; therefore, quotes that cover less than all the items and quantities in this quote will be rejected as non-responsive. The contract price includes all applicable Federal, state, and local taxes and duties. FOB Destination CONUS (Continental U.S.) Procedures for commercial vehicle access to military installations are varied. To enter the installation, the Contractor should thoroughly comply with the access procedures of a respective installation. The Contractor shall ensure that its drivers, including drivers of subcontractors at any tier, comply with the access procedures enforced by each military installation. The Contractor shall completely coordinate with the military installations and the delivery point of contacts. Procedures for commercial vehicle access to YTC are subject to change without prior notice. Current access information may be obtained by calling (509) 577-3236. As of 15 January 2002, the following requirements apply. Commercial vehicle access to YTC will be allowed only at the Main Gate (Exit 26 from I-82) on Monday through Friday. This gate will be open for inbound commercial vehicle access and inspection between 0700 hours and 1530 hours. The gate is closed on weekends (Saturdays and Sundays). All commercial vehicles will be searched. The Contractor should anticipate delays in getting commercial vehicles on YTC. If the commercial vehicle is carrying a load of cement concrete or hot asphalt concrete for delivery, the driver shall notify the gate guard as soon as possible and request that the vehicle be given priority for being searched; however, the Government does not guarantee that the vehicle will be given priority. Unless otherwise specified in this contract, the contractor shall obtain any necessary licenses and permits, give all notices, and comply with any applicable Federal, State, County, and municipal laws, codes, and regulations in connection with this award. The contractor shall not make news releases or otherwise provide information relative to the performance of this contract or information relative to any incident occurring on JBLM without prior approval of the Contracting Officer. (EFFECTIVE 1 JULY 2012) AT Level I Training. This provision/contract text is for contractor employees with an area of performance within an Army controlled installation, facility or area. All contractor employees, to include subcontractor employees, requiring access Army installations, facilities and controlled access areas shall complete AT Level I awareness training within XX calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer, if a COR is not assigned, within [insert number of calendar days] calendar days after completion of training by all employees and subcontractor personnel. AT level I awareness training is available at the following website: https://atlevel1.dtic.mil/at. (EFFECTIVE 1 JULY 2012) Access and General Protection/Security Policy and Procedures. This standard language text is for contractor employees with an area of performance within an Army controlled installation, facility or area. Contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes. (EFFECTIVE 1 JULY 2012) iWATCH Training. This standard language is for contractor employees with an area of performance within an Army controlled installation, facility or area. The contractor and all associated sub-contractors shall brief all employees on the local iWATCH program (training standards provided by the requiring activity ATO). This local developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 10 calendar days of contract award and within XX calendar days of new employees commencing performance with the results reported to the COR NLT XX calendar days after contract award. https://www.bliss.army.mil/iWATCH/ (EFFECTIVE 1 JULY 2012) Contractor Employees Who Require Access to Government Information Systems. All contractor employees with access to a government info system must be registered in the ATCTS (Army Training Certification Tracking System) at commencement of services, and must successfully complete the DOD Information Assurance Awareness prior to access to the IS and then annually thereafter. (EFFECTIVE 1 JULY 2012) For Information assurance (IA)/information technology (IT) training. All contractor employees and associated sub-contractor employees must complete the DoD IA awareness training before issuance of network access and annually thereafter. All contractor employees working IA/IT functions must comply with DoD and Army training requirements in DoDD 8570.01, DoD 8570.01-M and AR 25-2 within six months of employment. (EFFECTIVE 1 JLUY 2012) For information assurance (IA)/information technology (IT) cortication. Per DoD 8570.01-M , DFARS 252.239.7001 and AR 25-2, the contractor employees supporting IA/IT functions shall be appropriately certified upon contract award. The baseline certification as stipulated in DoD 8570.01-M must be completed upon contract award. In order to enhance the efficiency of the procurement process, the Government intends to evaluate only the lowest priced quote to determine if the quote is technically acceptable and whether the vendor has acceptable or neutral past performance. If the lowest priced quote is reasonably priced and technically acceptable and the vendor has acceptable or neutral past performance, the Government intends to make an award to that vendor and no other quote will be evaluated. If the lowest priced offer is not technically acceptable, the vendor does not have acceptable or neutral past performance, or both, then the Government will evaluate the second lowest priced quote for technical acceptability and acceptable or neutral past performance. This method will continue until the lowest priced, technically acceptable quote, by a vendor with acceptable or neutral past performance, is determined. Quotes will be evaluated based on price and technical acceptability. Quoter certifies that the product quoted meets or exceeds all minimum requirements as stated in the Request for Quotes.

Gantry Type Plasma Cutting System with Drilling/Trapping capabilitie In Accordance With Purchase Description VIBB 14-11-1038 dtd September 24, 2014

Defense Logistics Agency, DLA Acquisition Locations | Published November 4, 2014  -  Deadline November 19, 2014
cpvs

The DLA-Aviation-VICA, Industrial Plant Equipment Division, Richmond, VA, intends to procure a new and unused Plasma Cutting System, with Drilling and Tapping Capability in accordance with the Purchase Description VIBB-14-11-1038 dtd September 24, 2014. The purchase will include tooling, installation, Rigging, training, shipping and IUID Tags. Solicitation number SPM4A8-15-Q-0016 is issued as a request for quote (RFQ) and the solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular. Description: Plasma Cutter, tooling, installation, rigging, IUID tags and training in accordance with Purchase Description VIBB-14-11-1056 dated July 18, 2014. This requirement is a 100% Small Business Set-Aside, requiring the product(s) to be domestically manufactured by a small business. The award will be made as a firm fixed price contract. The award shall be based on Performance Price Tradeoff (PPT) source selection process. The required performance period is 270 calendar days after receipt of order. FOB at Destination and Inspection is origin with final inspection and acceptance at Destination. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Offers must be submitted to: Sandra.Birtwhistle@dla.mil no later than the close of business E.S.T. listed as the closing response date. All proposal's received after the closing date listed will be considered "late" and will not be considered for award.

CNC Bridge Mill in accordance with Purchase Description VIBB 14-11-1041

Defense Logistics Agency, DLA Acquisition Locations | Published November 5, 2014  -  Deadline November 24, 2014
cpvs

Action Code: Pre-solicitation Notice Date: November 5, 2014 Classification Code: 3417 NAICS Code: 333517 Contracting Office Address: DLA - Aviation / Defense Supply Center Richmond Industrial Plant Equipment Services Division ATTN: DLA-A-VICA 8000 Jefferson Davis Highway Richmond, Virginia 23297 Subject: CNC Bridge Mill in accordance with Purchase Description VIBB 14-11-1041 Solicitation Number: SPM4A8-15-Q-0018 Closing Response Date: November 24, 2014 2:00 P.M. E.S.T. Point of Contact: L. Ashli Butrico Email: Lauren.Butrico@dla.mil THIS IS A PRE-SOLICITATION NOTICE ONLY. The solicitation will be available on the Federal Business Opportunities (FedBizOpps) website November 10, 2014. Solicitations are in portable document format (PDF). To download and view these documents you will need the latest version of the Adobe Acrobat reader. This software is available free at http://www.adobe.com. This is notice of the Government's intent to issue a firm-fixed price contract under the authority of 10 U.S.C. 2304(c)(1) as implemented by FAR 6.1, full and open competition and incorporates provisions and clauses in effect through Federal Acquisition Circular 48 CFR 12.603. The award shall be based on performance, price, tradeoff (PPT) evaluation criteria. Anticipated contract completion date is January 29, 2016. FOB to Destination at Norfolk Naval Shipyard, Portsmouth, VA 23709. Preliminary inspection at Origin with final inspection and acceptance at Destination. All responsible sources may submit a bid, proposal, or quotation sufficient to determine capability which shall be considered by the agency. Proposals shall be submitted to the point of contact listed above no later than the closing date and time listed as the closing response date listed above. All respondents shall be registered in the System for Award Management, ORCA, and have a valid DUNS number, Cage Code, and Tax Identification Number. All proposals received after the closing date listed may be considered "late" and may not be considered for award.

Allen Bolts, Hex Bolts, and O-Ring

Defense Logistics Agency, DLA Acquisition Locations | Published December 5, 2014  -  Deadline December 11, 2014
cpvs

The Defense Logistics Agency, DLA Maritime Norfolk Naval Shipyard Contracting Division intends to negotiate a firm-fixed-price contract, sole source to Karl Senner, LLC (CAGE 68225), whereby this equipment will be used at the Norfolk Naval Shipyard, Portsmouth, Virginia. The North American Industry Classification System Code is 333612: Speed Changer: Industrial High-Speed Drive, and Gear Manufacturing. This will be solicited as an unrestricted requirement. The contract line items (CLINs) are as follows: CLIN 0001 (8) EACH, CARRIER K30, PART # 558303 CLIN 0002 (16) EACH, ALLEN BOLT, 6 X 40, PART # 8796 CLIN 0003 (12) EACH, ALLEN BOLT 6 X 70, PART # 528331 CLIN 0004 (12) EACH, ALLEN BOLT, 6 X 95, PART # 8967 CLIN 0005 (24) EACH, ALLEN BOLT, 6 X 100, PART # 8880 CLIN 0006 (24) EACH, ALLEN BOLT, 6 X 110, PART # 8884 CLIN 0007 (96) EACH, ALLEN BOLT, 6 X 40, PART # 10979 CLIN 0008 (96) EACH, FLAT WASHER, M12, PART # 210285 CLIN 0009 (8) EACH, ALLEN BOLT, 20 X 90, PART # 9415 CLIN 0010 (8) EACH, ALLEN BOLT, 20 X 120, PART # 9431 CLIN 0011 (8) EACH, ALLEN BOLT, 20 X 110, PART # 9423 CLIN 0012 (32) EACH, ALLEN BOLT, 12 X 70, PART # 12572 CLIN 0013 (64) EACH, FLAT WASHER, M12, PART # 210285 CLIN 0014 (32) EACH, FLAT WASHER, M20, PART # 75140 CLIN 0015 (16) EACH, ALLEN BOLT, 12 X 35, PART # 9148 CLIN 0016 (32) EACH, ALLEN BOLT, 10 X 25, PART # 8982 CLIN 0017 (32) EACH, HEX BOLT, 2 X 30, PART # 10952 CLIN 0018 (48) EACH, HEX BOLT, 10 X 55, PART # 9741 CLIN 0019 (96) EACH, FLAT WASHER, 10MM, PART # 210277 CLIN 0020 (64) EACH, FLAT WASHER, M12, PART # 210285 CLIN 0021 (32) EACH, PIPE CLAMP, M38, PART # 506855 CLIN 0022 (64) EACH, ALLEN BOLT, 6 X 70, PART # 528331 CLIN 0023 (32) EACH, PIPE CLAMP, M18, PART # 14788 CLIN 0024 (64) EACH, ALLEN BOLT, 6 X 30, PART # 8788 CLIN 0025 (24) EACH, PIPE CLAMP, M6, PART # 14760 CLIN 0026 (48) EACH, ALLEN BOLT, 6 X 25, PART # 8770 CLIN 0027 (14) EACH, PIPE CLAMP, M6, PART # 14760 CLIN 0028 (72) EACH, ALLEN BOLT, 6 X 30, PART # 8788 CLIN 0029 (24) EACH, PIPE CLAMP, M10, PART # 14772 CLIN 0030 (1) EACH, O-RING, PART # 48690 These parts will be used on existing equipment at Norfolk Naval Shipyard. Important note: See "CLINs" for details. This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Part 13 Simplified Acquisition Procedures for Commercial Items. The solicitation number is SPMYM1-15-Q-0010 and it is expected to be posted on or about 5 December 2014 and posted in FedBizOpps, https://www.fbo.gov/. Quotes will be due by 12:00 PM EDT on 11 December 2014 and may be e-mailed to the attention of Elizabeth Crocker at elizabeth.crocker@dla.mil. Please make sure that the solicitation number (SPMYM1-15-Q-0010) is included in the subject line of any e-mail correspondence. E-mails without subject lines will not be read because of security issues. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://www.fbo.gov (Federal Business Opportunities). By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.

CABLE EXTENSION MOLD

Defense Logistics Agency, DLA Acquisition Locations | Published January 13, 2015  -  Deadline January 20, 2015
cpvs

The Defense Logistics Agency, Contracting Division, Norfolk Naval Shipyard Maritime Industrial Division intends to negotiate a firm fixed price contract to procure 100 EA Cable, Extension, Molded, 3M50/3F50 Male to Female Black Extension 55A Molded to 50' of 6/3 SO Cable W/O Cap, P/N M102202-006B-050-BLK, which will be required by the Norfolk Naval Shipyard, in Portsmouth, VA. A full list of references and associated ordering data shall be set forth within the written solicitation. These items will be acquired in accordance with Federal Acquisition Regulation (FAR) Part 12 - Acquisition of Commercial Items and FAR Part 13 - Simplified Acquisition Procedures. The procurement will be solicited on an unrestricted basis. The North American Industry Classification System code for this acquisition is 335929. Requests for quote will be available for download on or about 12 Jan 2015 at the following websites: http://www.fbo.gov under solicitation number SPMYM1-15-Q-0014 with a closing date of January 26, 2015. Potential vendors are hereby notified that the solicitation and subsequent amendments to the solicitation will ONLY be available by downloading the documents at the above web site. This office will no longer issue hard copy solicitations. By submitting a quote, the vendor will be self-certifying that neither the requestor nor the principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the quote. Through its submission, the vendor acknowledge the requirement that a prospective awardee must registered in the System For Award Management (SAM) database prior to award, during performance and through final payment of any contract resulting from this solicitation, except for award to foreign vendors for work to be performed outside the United States. Lack of registration in the CCR database will make a vendor ineligible for award. Vendor may obtain information on registration and annual confirmation by calling 1-866-606-8220 or via the internet at https://www.fsd.gov or sam.gov. The NECO website has a "Submit Bid" Button next to the solicitation number. DO NOT use the "Submit Bid" Button on NECO to submit your proposal. Telephone request is not authorized and shall not be accepted. Quotes will be due by 10:00 a.m. EST on 26 January 2015 and may be faxed to the attention of Carolyn F Burns at fax number (757) 396-8017 or emailed at carolyn.burns@dla.mil. Please make sure that the solicitation number (SPMYM1-15-Q-0014) is included in the subject line of any email correspondence. All quotes shall include price(s), FOB point, a point of contact (name and phone number), Tax I.D.#, DUNS#, Cage Code, GSA contract number (if applicable), business size, and payment terms. Each response must clearly indicate the vendor's capability to meet all specifications and requirements.

65--Equipment Co2 Monitor Mechanical Ventilators

Department of Veterans Affairs, VA South Texas Health Care System | Published January 13, 2015  -  Deadline January 16, 2015
cpvs

This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and a written solicitation will not be issued. The solicitation number is VA257-15-Q-0462. This acquisition is issued as a Request for Quote (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-72, effective December, 14 2014. The associated North American Industrial Classification System Code (NAICS) for this procurement is 339112 with a small business standard of 500 employees. This acquisition is solicited as a set-aside for small business. Network Contracting Office 17 requests responses from qualified sources capable of providing the following item(s): CLIN 0001: 8416200 CO2 Monitoring Upgrade Kits for new Draeger Mechanical Ventilators. 30 EA Delivery: ________Days after award Delivery at the Audie L Murphy VA Hospital 7400 Merton Minter Blvd San Antonio Texas 78229. The following FAR and VAAR Clauses and provisions in their latest editions apply to this solicitation. 52.212-1, Instructions to Offerors-Commercial Items. 52.212-2, Evaluation Commercial Items. Technical acceptability to meet the Governments requirement, past performance, delivery and price. Technical and past performance, when combined is less important than price. 52.212-3 Offeror Representations and Certifications - Commercial Items. Offerors must include a completed copy of Representations and Certifications with their offer. 52.212-4 Contract Terms and Conditions - Commercial Items. 52.204-7 Central Contractor Registration 52.219-6, Notice of Total Small Business Set-Aside 52.219-13, Notice of Set-Aside Orders 52.222-50 Combatting Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.233-3 Protest after Award 52.233-4 Applicable Law for Breach of Contract Claim The following clauses will be incorporated in full text. 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items The following clauses shall be considered marked within 52.212-5 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-6 Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. 52.222-3, Convict Labor 52.222-19, Child Labor - Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-22 Previous Contracts Compliance Report 52.222-25 Affirmative Action Compliance 52.222-26 Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration 52.219-28, Post Award Small Business Program Representation 52.252-1, Solicitation Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 52.252-2, Clauses Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 852.203-70, Commercial Advertising 852.211-70 Service Data Manuals 852.237-70 Contractor Responsibilities "Texas" shall be inserted into the fill in 852.246-70 Guarantee 852.273-74, Awards without Exchanges The Government intends to award a firm fixed price contract resulting from this combined synopsis/solicitation. All offerors must be registered in the System for Award Management (SAM) prior to award (www.sam.gov). Quotes are being requested and a written solicitation will not be issued. Paper copies of this solicitation will not be issued and telephone requests or fax requests for the solicitation will not be accepted. Quotes must include company name, company DUNS number, and point of contact information. All responsible sources should submit quotes to Bobby Thornton via e-mail: Bobby.Thornton@va.gov by Friday 16 January 2015, 12:00PM CST.

70--SolarWinds Licenses

Department of the Army, FedBid | Published January 28, 2015  -  Deadline February 4, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W912CN-15-T-0054 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-79. The associated North American Industrial Classification System (NAICS) code for this procurement is 511210 with a small business size standard of $38.50M.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-02-04 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Honolulu, HI 96859 The ECC PACIFIC RCO Hawaii requires the following items, Brand Name or Equal, to the following: LI 001: FSC 7030 ADP Software See Solicitation, 1, EA; LI 002: FSC 7030 ADP Software See Solicitation, 1, EA; LI 003: FSC 7030 ADP Software See Solicitation, 1, EA; LI 004: FSC 7030 ADP Software See Solicitation, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, ECC PACIFIC RCO Hawaii intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. ECC PACIFIC RCO Hawaii is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation Provisions Incorporated by Reference; FAR 52.204-8, Annual Representation and Certification; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal, DFARS 252.212-7000, Offeror Representations and Certifications-Commercial items. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions - Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor?Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: 252.204-7004 ALT A, Required Central Contractor Registration; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; DFARS clause 252.212-7001, Contract Terms and Conditions Required To Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, paragraph b apply: 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, ALT III, Transportation of Supplies by Sea. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. IAW FAR 52.204-8 Annual Representation and Certification, the offeror is required to input their Representations and Certifications into the online representation and certifications application (ORCA) database which is located at https://orca.bpn.gov/ Shipping must be Free On Board (FOB) Destination OCONUS (Outside Continental U.S.) New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Bids will be valid for 45 days after the auction closing. No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an ?all-or-nothing? basis. IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement is __________ with a small business size standard of ___ employees. The contractor must be an authorized dealer of the specified equipment to ensure warranty and maintenance support. 52.228-5000 -- REQUIRED INSURANCE - Use in solicitations and contracts if a fixed-price contract is contemplated, the contract amount is expected to exceed the simplified acquisition threshold, and the contract will require work on a Government installation, unless -- (1) Only a small amount of work is required on the Government installation (e.g., a few brief visits per month); or (2) All work on the Government installation is to be performed outside the United States and its outlying areas. (a) The Contractor shall procure and maintain during the entire period of his performance under this contract the following minimum insurance: AMOUNT TYPE PER PERSON PER ACCIDENT PROPERTY Comprehensive General Liability: $500,000 Comprehensive Automobile Liability $200,000 $500,000 $20,000 Workmen's Compensation and Liability Insurance: As prescribed or required by law, with minimum employer liability limit of $100,000 for accidental bodily injury or death, or for occupational disease.) (b) Prior to the commencement of work, the Contractor shall furnish to the Contracting Officer a certificate or written statement of the above required insurance. The policies evidencing required insurance shall contain an endorsement to the effect that cancellation or any material change in the policies adversely affecting the interests of the Government in such insurance shall not be effective for such period as may be prescribed by the laws of the State in which this contract is to be performed and in no event less than thirty (30) days after written notice thereof to the Contracting Officer. (c) The Contractor agrees to insert the substance of this clause, including this paragraph (c) in all subcontracts hereunder. (d) It is the contractor?s responsibility to insure the following changes are incorporated into their submitted Certificate of Insurance: 1. The Contract Number must appear in the body of the Certificate of Insurance. 2. The Certificate holder name shall read: Army Materiel Command Regional Contracting Office, Hawaii 413th CSB 3. The certificate shall be provided to the following address ____ Contracting Division Alpha Bldg 520, Basement, Pierce Street Fort Shafter, HI 96858-5025 FAX 808-438-6463 or 6544 ____ Contracting Division Omega Bldg 692, Basement, McCormack Road Schofield Barracks, HI 96857-5000 FAX 808-655-7350 (e) For all contractors using the ACORD form dated earlier than October 2009, the Certificate of Insurance cancellation statement shall be revised as follows: Delete the words ?endeavor to? and ?but failure to do so shall impose no obligation or liability of any kind upon the insurer, its agents or representatives.? The Certificate of Insurance cancellation statement shall then read: ?Should any of the above described policies be cancelled before the expiration date thereof, the issuing insurer will mail 30 days written notice to the certificate holder named to the left.? 52.232-5000 -- WAWF INVOICING INSTRUCTIONS AND PAYMENT FOR SUPPLIES/SERVICES/ CONSTRUCTION Use in all solicitations and contracts. (a) Invoices for services rendered under this Contract shall be submitted electronically through Wide Area Work Flow. The vendor shall self-register at the web site https://wawf.eb.mil/. Vendor training is available on the Internet at: http://wawftraining.com/ Army Help Desk -- Normal operating hours, 0630-1800 Eastern Standard time. Army WAWF Help Desk 1-877-2-DA-WAWF or 1-877-232-9293 (b) Under this contractual document, contractor is required to submit the following type of invoice utilizing WAWF. __ Select the Invoice only within WAWF as the invoice type ? Creates Stand Alone Invoice __ Select the 2-in-1 Invoice within WAWF as the invoice type. Creates two documents, an Invoice and a Receiving Report, within one data entry session. The 2-in-1 Invoice prepares the Material Inspection and Receiving Report, DD Form 250, and invoice in one document. Back up documentation (such as timesheets, etc.) can be included and attached to the invoice in WAWF. __ Select Combo --The Invoice and Receiving Report Combo enables a Vendor to create two documents from the same data entry session. The Vendor inputs contract and item data once. Two separate documents - an Invoice and a Receiving Report - are generated in the WAWF system. __ Construction ? Creates a Construction Payment Invoice from a contract for construction. Both an inspection and a contracting officer must review and accept. The following information is provided for completion of the invoice in WAWF: Issuing Office DODAAC: W912CN Admin DODAAC: W912CN Inspector/Acceptor DODAAC: (See Block 15, SF 1449) LPO DODAAC: NA (only applicable if you have Navy funding) Pay DODAAC: (See Block 18, SF 1449) Receiver/Acceptor: Contract Specialist: Contracting Officer: Contract Number: (See Block 2, SF 1449) (c ) The contractor shall submit invoices for payment per contract terms. The Government shall process invoices for payment per contract terms 52.233-5000 -- AMC-LEVEL PROTEST PROGRAM Use in all solicitations. (a) If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible Contracting Officer. However, you can also protest to Headquarters, AMC. (b) The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. (c) The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. Send protests (other than protests to the Contracting Officer) to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256)450-8840 (d) The AMC-level protest procedures are found at: http://www.amc.army.mil/amc/commandcounsel.html. If Internet access is not available, contact the Contracting Officer or HQ, AMC, to obtain the AMC-Level Protest Procedures. 52.239-5000 -- SECTION 508 OF THE REHABILITATION ACT COMPLIANCE. Use in all solicitations and contract for electronic and information technology. (a) All products provided under this contract vehicle must meet the applicable accessibility standards at 36 CFR Part 1194 as required by FAR Case 1999-607. (b) General information regarding the Section 508 Act can be found at the web site www.section508.gov. 52.245-5000 -- CONTRACTOR LIABILITY FOR PROPERTY Use in all solicitations and contract involving contractor property on a military installation. (a) Unless otherwise specified, the Government assumes no liability, and hereby disclaims liability for damages to or losses of, Contractor-owned or furnished property which, pursuant to the terms of his contract, is placed on a U.S. Government installation or other real property under the control of the United States Government, whether by lease, license, permit, or otherwise, except for loss or damage caused by the negligence or wrongful act or omission of a military person or civilian employee or the Department of Defense while acting within the scope of this employment under circumstances in which the United States if a private person, would be liable to the Contractor in accordance with the law of the place where the act or omission occurred. (b) Any claim of the Contractor falling within the purview of the exception, should be submitted, pursuant to the Federal Tort Claims Act, to the 413th Contracting Support Brigade, Regional Contacting Office- Hawaii, Fort Shafter, Hawaii 96858-5025. 252.209-7999 REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW (DEVIATION 2012-O0004) (JAN 2012) (a) In accordance with sections 8124 and 8125 of Division A of the Consolidated Appropriations Act, 2012,(Pub. L. 112-74) none of the funds made available by that Act may be used to enter into a contract with any corporation that ? (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that? (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

65--671-15-1-039-0073 Dual Energy CS

Department of Veterans Affairs, VA South Texas Health Care System | Published February 6, 2015  -  Deadline February 11, 2015
cpvs

This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and a written solicitation will not be issued. The solicitation number is VA257-15-Q-0567. This acquisition is issued as a Request for Quote (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-72, effective December, 14 2014. The associated North American Industrial Classification System Code (NAICS) for this procurement is 334516 with a small business standard of 500 employees. This acquisition is solicited as a set-aside for small business. Network Contracting Office 17 requests responses from qualified sources capable of providing the following item(s): CLIN 0001: NOT CAPITALIZED/ACCT/ADDL: 1 Discovery XR6501B Options Dual Energy Subtraction for Chest and Abdomen Dual Energy Subtraction Chest & Abdomen Dual Energy Subtraction is Avanced Clinical Application provides three diagnostic images standard, soft tissue only and bone only images. The technique is available for PA/AP chest and abdomen imaging 1 EA Delivery: ________Days after award Delivery at the Audie L Murphy VA Hospital 7400 Merton Minter Blvd San Antonio Texas 78229. The following FAR and VAAR Clauses and provisions in their latest editions apply to this solicitation. 52.212-1, Instructions to Offerors-Commercial Items. 52.212-2, Evaluation Commercial Items. Technical acceptability to meet the Governments requirement, past performance, delivery and price. Technical and past performance, when combined is less important than price. 52.212-3 Offeror Representations and Certifications - Commercial Items. Offerors must include a completed copy of Representations and Certifications with their offer. 52.212-4 Contract Terms and Conditions - Commercial Items. 52.204-7 Central Contractor Registration 52.219-6, Notice of Total Small Business Set-Aside 52.219-13, Notice of Set-Aside Orders 52.222-50 Combatting Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.233-3 Protest after Award 52.233-4 Applicable Law for Breach of Contract Claim The following clauses will be incorporated in full text. 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items The following clauses shall be considered marked within 52.212-5 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-6 Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. 52.222-3, Convict Labor 52.222-19, Child Labor - Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-22 Previous Contracts Compliance Report 52.222-25 Affirmative Action Compliance 52.222-26 Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration 52.219-28, Post Award Small Business Program Representation 52.252-1, Solicitation Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 52.252-2, Clauses Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 852.203-70, Commercial Advertising 852.211-70 Service Data Manuals 852.237-70 Contractor Responsibilities "Texas" shall be inserted into the fill in 852.246-70 Guarantee 852.273-74, Awards without Exchanges The Government intends to award a firm fixed price contract resulting from this combined synopsis/solicitation. All offerors must be registered in the System for Award Management (SAM) prior to award (www.sam.gov). Quotes are being requested and a written solicitation will not be issued. Paper copies of this solicitation will not be issued and telephone requests or fax requests for the solicitation will not be accepted. Quotes must include company name, company DUNS number, and point of contact information. All responsible sources should submit quotes to Bobby Thornton via e-mail: Bobby.Thornton@va.gov by Thursday 12 February 2015, 11:00PM CST.

BACK PACKS, COFFEE MUGS, DUFFELL BAG, MULTI-FUNCTION TOOL KIT

Defense Logistics Agency, DLA Acquisition Locations | Published February 11, 2015  -  Deadline February 26, 2015
cpvs

The Defense Logistics Agency, Contracting Division, Norfolk Naval Shipyard Maritime Industrial Division intends to negotiate a firm fixed price contract for promotional clothing items which will be required by the Norfolk Naval Shipyard, in Portsmouth, VA. A full list of references and associated ordering data shall be set forth within the written solicitation. The promotional clothing items will be acquired in accordance with Federal Acquisition Regulation (FAR) Part 12 - Acquisition of Commercial Items and FAR Part 13 - Simplified Acquisition Procedures. The procurement will be solicited on an unrestricted basis. The North American Industry Classification System code for this acquisition is 339999. Requests for quote will be available for download on or about 12 February 2015 at the following websites: www.fbo.gov under solicitation number SPMYM1-15-Q-0022 Potential vendors are hereby notified that the solicitation and subsequent amendments to the solicitation will ONLY be available by downloading the documents at the above web site. This office will no longer issue hard copy solicitations. By submitting a quote, the vendor will be self-certifying that neither the requestor nor the principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the quote. Through its submission, the vendor acknowledge the requirement that a prospective awardee must registered in the System For Award Management (SAM) database prior to award, during performance and through final payment of any contract resulting from this solicitation, except for award to foreign vendors for work to be performed outside the United States. Lack of registration in the CCR database will make a vendor ineligible for award. Vendor may obtain information on registration and annual confirmation by calling 866-606-8220 or via the internet at https://www.sam.gov. The NECO website has a "Submit Bid" Button next to the solicitation number. DO NOT use the "Submit Bid" Button on NECO to submit your proposal. Telephone request is not authorized and shall not be accepted. Quotes will be due by 4:00 p.m. EST on 26 February 2015 and may be faxed to the attention of Carolyn F Burns at fax number (757) 396-8017 or emailed at carolyn.f.burns@navy.mil. Please make sure that the solicitation number (SPMYM1-14-Q-0022) is included in the subject line of any email correspondence. All quotes shall include price(s), FOB point, a point of contact (name and phone number), Tax I.D. #, DUNS#, Cage Code, GSA contract number (if applicable), business size, and payment terms. Each response must clearly indicate the vendor's capability to meet all specifications and requirements.

Abrasive Wheels and Metal Cutting Wheels

Defense Logistics Agency, DLA Acquisition Locations | Published February 13, 2015  -  Deadline February 19, 2015
cpvs

This is a modification to the original synopsis posted 16-Jan-15. The Defense Logistics Agency, DLA Maritime Norfolk Naval Shipyard, Contracting Division intends to negotiate a firm-fixed-price, Requirements-type contract in accordance with FAR Subpart 16.503 that includes a base year and one-year option period. This equipment will be used at Norfolk Naval Shipyard, Portsmouth, Virginia. The North American Industry Classification System (NAICS) Code is 423840: Industrial Supplies Merchant Wholesalers. This procurement will be solicited as a total small business set-aside. The contract line items (CLINs) are as follows: CLIN 0001: QTY - 24,301 EA, ABRASIVE WHEEL ORDERING DATA: DISC, FEMALE SPEED LOC, 3.00'', 36 GRIT BRAND NAME OR EQUAL TO NORTON PART # 6626-1138664 ALL "OR EQUALS" SHALL BE APPROVED BY CODE 515.2 CLIN 0002: QTY - 24,301 EA, METAL CUTTING WHEEL ORDERING DATA: ABRASIVE CUT OFF (FLAT WHEEL) REINFORCED RESINOID BOND MUST BE CAPABLE OF 17,000 RPM MAX SAFE SPEED BRAND NAME OR EQUAL TO NORTON PART # A-36-TBNA OR FEDERAL MOGUL PART # A-36-TBNF ANY NEW BRAND MUST BE APPROVED BY CODE NMBB 3 ½'' X 1/16'' X ½'' ARBOR HOLE NOTE: NORTON PART # 66243528301 IS A SPECIAL-MADE CUTTING WHEEL FOR NNSY. AS OF 23-OCT-12, THIS PART # HAS BEEN DISCONTINUED AND REPLACED BY PART # 66243518531. These items will be used in Shop Stores at Norfolk Naval Shipyard. Important note: See "CLINs" and "ORDERING DATA" for details. ALL QUOTES SHALL INCLUDE PRICE(S), FOB POINT (ESTIMATED FREIGHT CHARGE TO ZIP 23709 IF NOT DESTINATION). TAX ID#, DUNS #, CAGE CODE, BUSINESS SIZE, PAYMENT TERMS AND DELIVERY TIME. This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 16.503 - Requirements Contracts and FAR Subpart 13.5 - Test Program for Certain Commercial Items. The solicitation number is SPMYM1-15-Q-0015 and it is expected to be posted on or about 13 February 2015 and posted in FedBizOpps, https://www.fbo.gov/. Quotes will be due by 3:30 PM EST on 19 February 2015 and may be e-mailed to the attention of Elizabeth Crocker at elizabeth.crocker@dla.mil. Please make sure that the solicitation number (SPMYM1-15-Q-0015) is included in the subject line of any e-mail correspondence. E-mails without subject lines will not be read because of security issues. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://www.fbo.gov (Federal Business Opportunities). By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.

Aluminum Blank Flanges

Defense Logistics Agency, DLA Acquisition Locations | Published February 13, 2015  -  Deadline February 19, 2015
cpvs

This is a modification to the synopsis posted 16-Jan-15. The Defense Logistics Agency, DLA Maritime Norfolk Naval Shipyard, Contracting Division intends to negotiate a firm-fixed-price, Requirements-type contract in accordance with FAR Subpart 16.503 that includes a base year and one-year option period. This equipment will be used at Norfolk Naval Shipyard, Portsmouth, Virginia. The North American Industry Classification System (NAICS) Code is 423840: Industrial Supplies Merchant Wholesalers. This procurement will be solicited as a total small business set-aside. The contract line items (CLINs) are as follows: CLIN 0001: QTY - 861 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 3.375'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0002: QTY - 1,031 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 3.500'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0003: QTY - 825 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 3.750'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0004: QTY - 993 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 4.500'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0005: QTY - 985 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 5.500'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0006: QTY - 1,025 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 6.500'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW ASTM-B209 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0007: QTY - 909 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 7.500'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMIMUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0008: QTY - 470 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 8.250'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0009: QTY - 623 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 9.00'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0010: QTY - 686 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 10.00'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0011: QTY - 270 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 10.375'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0012: QTY - 298 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 11.00'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0013: QTY - 117 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 11.750'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0014: QTY - 306 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 12.375'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0015: QTY - 131 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 13.00'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0016: QTY - 181 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 13.500'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0017: QTY - 211 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 14.750'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0018: QTY - 250 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 16.00'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0019: QTY - 75 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 16.500'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0020: QTY - 85 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 17.00'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0021: QTY - 290 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 17.625'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) CLIN 0022: QTY - 300 EA, BLANK FLANGE (CLEANLINESS BLANK) ORDERING DATA: 19.00'' OUTSIDE DIAMETER 0.050'' CROSS SECTIONAL THICKNESS MATERIAL TO BE ALUMINUM IAW QQ-A-250/8 OR EQUAL ALL SURFACES TO BE FREE OF BURRS, SHAVINGS, ETC. (DEBURRED) These items will be used in Shop Stores at Norfolk Naval Shipyard. Important note: See "CLINs" and "ORDERING DATA" for details. ALL QUOTES SHALL INCLUDE PRICE(S), FOB POINT (ESTIMATED FREIGHT CHARGE TO ZIP 23709 IF NOT DESTINATION). TAX ID#, DUNS #, CAGE CODE, BUSINESS SIZE, PAYMENT TERMS AND DELIVERY TIME. This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 16.503 - Requirements Contracts and FAR Subpart 13.5 - Test Program for Certain Commercial Items. The solicitation number is SPMYM1-15-Q-0016 and it is expected to be posted on or about 13 February 2015 and posted in FedBizOpps, https://www.fbo.gov/. Quotes will be due by 3:30 PM EST on 19 February 2015 and may be e-mailed to the attention of Elizabeth Crocker at elizabeth.crocker@dla.mil. Please make sure that the solicitation number (SPMYM1-15-Q-0016) is included in the subject line of any e-mail correspondence. E-mails without subject lines will not be read because of security issues. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://www.fbo.gov (Federal Business Opportunities). By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.

H--TESTING OF ELECTRICAL SAFETY EQUIPMENT

Department of the Navy, Naval Supply Systems Command | Published February 20, 2015  -  Deadline February 25, 2015
cpvs

The NAVSUP Fleet Logistics Center Norfolk, Contracting Department, Norfolk Naval Shipyard Maritime Industrial Division intends to negotiate a Firm Fixed-Price Contract, base with two-one year options to perform Electrical Safety Equipment Testing Service for Electrical Gloves, Sleeves, and Blanket to be picked-up and returned to Norfolk Naval Shipyard in Portsmouth, VA 23709-5000. Specifications shall be set forth within the written solicitation. The service will be acquired in accordance with Federal Acquisition Regulation (FAR) Part 12 - Acquisition of Commercial Items and FAR Part 13 - Simplified Acquisition Procedures. The procurement will be solicited as a 100% Small Business Set Aside. The North American Industry Classification System code for this acquisition is 541380 with a small business standard of $15.0 Million. Requests for quote will be available for download on or about 20 February 2015 with a closing on 25 February 2015 at the following websites: http://www.neco.navy.mil under solicitation number N00189-15-T-N025. Potential vendors are hereby notified that the solicitation and subsequent amendments to the solicitation will ONLY be available by downloading the documents at the above web site. This office will no longer issue hard copy solicitations. By submitting a quote, the vendor will be self-certifying that neither the requestor nor the principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. The Government is not responsible for any inability of the offerors to access the posted documents. Prospective offerors should register themselves on the NECO website. Prospective offerors should also register at FEDBIZOPPS on the interested vendor list. No telephone or FAX requests will be accepted, and no hard-copy solicitation/amendment will be mailed or Faxed. All responsible sources may submit a bid, proposal or quotation which shall be considered by Fleet Logistics Center Norfolk (FLCN.) Offerors must also be registered in the System for Award Management (SAM) in order to participate in this procurement at http://www.sam.gov. All questions regarding this solicitation shall be submitted in writing to the Contract Specialist, Anjune Ennis, Code 533.2A, fax: 757-396-9895, or email: anjune.ennis@navy.mil.

Tee Shirts, Polos, Jackets

Defense Logistics Agency, DLA Acquisition Locations | Published February 27, 2015  -  Deadline March 20, 2015
cpvs

The Defense Logistics Agency, Contracting Division, Norfolk Naval Shipyard Maritime Industrial Division intends to negotiate a firm fixed price contract for promotional clothing items which will be required by the Norfolk Naval Shipyard, in Portsmouth, VA. A full list of references and associated ordering data shall be set forth within the written solicitation. The promotional clothing items will be acquired in accordance with Federal Acquisition Regulation (FAR) Part 12 - Acquisition of Commercial Items and FAR Part 13 - Simplified Acquisition Procedures. The procurement will be solicited on an unrestricted basis. The North American Industry Classification System code for this acquisition is 339999. Requests for quote will be available for download on or about 01 March 2015 at the following websites: www.fbo.gov under solicitation number SPMYM1-15-Q-0018 Potential vendors are hereby notified that the solicitation and subsequent amendments to the solicitation will ONLY be available by downloading the documents at the above web site. This office will no longer issue hard copy solicitations. By submitting a quote, the vendor will be self-certifying that neither the requestor nor the principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the quote. Through its submission, the vendor acknowledge the requirement that a prospective awardee must registered in the System For Award Management (SAM) database prior to award, during performance and through final payment of any contract resulting from this solicitation, except for award to foreign vendors for work to be performed outside the United States. Lack of registration in the CCR database will make a vendor ineligible for award. Vendor may obtain information on registration and annual confirmation by calling 866-606-8220 or via the internet at https://www.sam.gov. The NECO website has a "Submit Bid" Button next to the solicitation number. DO NOT use the "Submit Bid" Button on NECO to submit your proposal. Telephone request is not authorized and shall not be accepted. Quotes will be due by 2:00 p.m. EST on 20 March 2015 and may be faxed to the attention of Carolyn F Burns at fax number (757) 396-8017 or emailed at carolyn.f.burns@navy.mil. Please make sure that the solicitation number (SPMYM1-14-Q-0018) is included in the subject line of any email correspondence. All quotes shall include price(s), FOB point, a point of contact (name and phone number), Tax I.D. #, DUNS#, Cage Code, GSA contract number (if applicable), business size, and payment terms. Each response must clearly indicate the vendor's capability to meet all specifications and requirements.

69--Thermal Targets

Department of the Army, FedBid | Published March 9, 2015  -  Deadline March 16, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is UNAWARD-15-Q-8072 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-80. The associated North American Industrial Classification System (NAICS) code for this procurement is 332999 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-03-16 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yakima, WA 98901 The MICC Joint Base Lewis McChord requires the following items, Meet or Exceed, to the following: LI 001: Frontal Target Civilian Truck Civilian Truck, Intergrated Thermal Frontal Target Specifications for targets: Targets must be 1/4 inch or thicker fiberglass material with an integrated/internal thermal signature which is embedded in the target. Thermal must be 110 volt powered. Target must be rigid enough to withstand and detect rounds from 5.56 to TOW missiles and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to function - no stick on thermal - no plywood to attach to the target, etc. Target must be able to withstand sustained 40mph wind without folding up or breaking. Must be able to withstand heat up to 120f degrees; must be able to withstand cold down to -7f degrees. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 65, EA; LI 002: Frontal Target T-72 T-72 Frontals, Intergrated Thermal Frontal Target Specifications for targets: Targets must be 1/4 inch or thicker fiberglass material with an integrated/internal thermal signature which is embedded in the target. Thermal must be 110 volt powered. Target must be rigid enough to withstand and detect rounds from 5.56 to TOW missiles and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to function - no stick on thermal - no plywood to attach to the target, etc. Target must be able to withstand sustained 40mph wind without folding up or breaking. Must be able to withstand heat up to 120f degrees; must be able to withstand cold down to -7f degrees. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 6, EA; LI 003: Front Flank Target BMP Flanks BMP Flanks (Front Half), Intergrated Thermal Front Flank Target Specifications for targets: Targets must be 1/4 inch or thicker fiberglass material with an integrated/internal thermal signature which is embedded in the target. Thermal must be 110 volt powered. Target must be rigid enough to withstand and detect rounds from 5.56 to TOW missiles and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to function - no stick on thermal - no plywood to attach to the target, etc. Target must be able to withstand sustained 40mph wind without folding up or breaking. Must be able to withstand heat up to 120f degrees; must be able to withstand cold down to -7f degrees. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow, 3, EA; LI 004: Rear Flank Target BMP Flanks BMP Flanks (Rear Half), Intergrated Thermal Rear Flank Target Specifications for targets: Targets must be 1/4 inch or thicker fiberglass material with an integrated/internal thermal signature which is embedded in the target. Thermal must be 110 volt powered. Target must be rigid enough to withstand and detect rounds from 5.56 to TOW missiles and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to function - no stick on thermal - no plywood to attach to the target, etc. Target must be able to withstand sustained 40mph wind without folding up or breaking. Must be able to withstand heat up to 120f degrees; must be able to withstand cold down to -7f degrees. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 3, EA; LI 005: Frontal Target BMP Frontals BMP Frontals, Intergrated Thermal Frontal Target Specifications for targets: Targets must be 1/4 inch or thicker fiberglass material with an integrated/internal thermal signature which is embedded in the target. Thermal must be 110 volt powered. Target must be rigid enough to withstand and detect rounds from 5.56 to TOW missiles and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to function - no stick on thermal - no plywood to attach to the target, etc. Target must be able to withstand sustained 40mph wind without folding up or breaking. Must be able to withstand heat up to 120f degrees; must be able to withstand cold down to -7f degrees. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 14, EA; LI 006: Front Flank Target Civilian Truck Civilian Truck (Rear Half), Intergrated Thermal Rear Flank Target Specifications for targets: Targets must be 1/4 inch or thicker fiberglass material with an integrated/internal thermal signature which is embedded in the target. Thermal must be 110 volt powered. Target must be rigid enough to withstand and detect rounds from 5.56 to TOW missiles and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to function - no stick on thermal - no plywood to attach to the target, etc. Target must be able to withstand sustained 40mph wind without folding up or breaking. Must be able to withstand heat up to 120f degrees; must be able to withstand cold down to -7f degrees. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 7, EA; LI 007: Rear Flank Target Civilian Truck Civilian Truck (Front Half), Intergrated Thermal Front Flank Target Specifications for targets: Targets must be 1/4 inch or thicker fiberglass material with an integrated/internal thermal signature which is embedded in the target. Thermal must be 110 volt powered. Target must be rigid enough to withstand and detect rounds from 5.56 to TOW missiles and large caliber (105mm & 120mm) tank rounds. Target must be able to be installed without additional items to function - no stick on thermal - no plywood to attach to the target, etc. Target must be able to withstand sustained 40mph wind without folding up or breaking. Must be able to withstand heat up to 120f degrees; must be able to withstand cold down to -7f degrees. Must be able to maintain thermal signature in the aforementioned and be able to maintain thermal in rain and snow., 7, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Joint Base Lewis McChord intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Joint Base Lewis McChord is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The Contracting Officer (KO) at Mission and Installation contracting Office, Joint Base Lewis-McChord is the only person authorized to approve changes or modify any of the requirements under this contract, and notwithstanding anything contained elsewhere in this contract, the said authority remains solely with the KO. In the event the Contractor or contract employee effects any such change at the direction of any person other than the KO, the change will be considered to have been without authority, and no adjustment will be made in the contract price under the Changes clause or any other clause to cover any increase in costs incurred as a result thereof. A protest to a U.S. Army Materiel Command forum is considered a ?protest to the agency?, as described in FAR 33.103. The HQAMC Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an alternative dispute resolution forum, rather than filing a protest with the Government Accountability Office or another external forum. The proper address for AMC level protests is: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or e-mail: usarmy.redstone.usamc.mbx.protests@mail.mil If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number (703) 806-8866 or 8875 Packages sent by FedEx or UPS should be addressed to: HQ Army Material Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. As prescribed in 22.1705(a), insert the following clause: COMBATING TRAFFICKING IN PERSONS (FEB 2009) (a) Definitions. As used in this clause-- Coercion means-- (1) Threats of serious harm to or physical restraint against any person; (2) Any scheme, plan, or pattern intended to cause a person to believe that failure to perform an act would result in serious harm to or physical restraint against any person; or (3) The abuse or threatened abuse of the legal process. Commercial sex act means any sex act on account of which anything of value is given to or received by any person. Debt bondage means the status or condition of a debtor arising from a pledge by the debtor of his or her personal services or of those of a person under his or her control as a security for debt, if the value of those services as reasonably assessed is not applied toward the liquidation of the debt or the length and nature of those services are not respectively limited and defined. Employee means an employee of the Contractor directly engaged in the performance of work under the contract who has other than a minimal impact or involvement in contract performance. Forced Labor means knowingly providing or obtaining the labor or services of a person-- (1) By threats of serious harm to, or physical restraint against, that person or another person; (2) By means of any scheme, plan, or pattern intended to cause the person to believe that, if the person did not perform such labor or services, that person or another person would suffer serious harm or physical restraint; or (3) By means of the abuse or threatened abuse of law or the legal process. Involuntary servitude includes a condition of servitude induced by means of-- (1) Any scheme, plan, or pattern intended to cause a person to believe that, if the person did not enter into or continue in such conditions, that person or another person would suffer serious harm or physical restraint; or (2) The abuse or threatened abuse of the legal process. Severe forms of trafficking in persons means-- (1) Sex trafficking in which a commercial sex act is induced by force, fraud, or coercion, or in which the person induced to perform such act has not attained 18 years of age; or (2) The recruitment, harboring, transportation, provision, or obtaining of a person for labor or services, through the use of force, fraud, or coercion for the purpose of subjection to involuntary servitude, peonage, debt bondage, or slavery. Sex trafficking means the recruitment, harboring, transportation, provision, or obtaining of a person for the purpose of a commercial sex act. (b) Policy. The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not-- (1) Engage in severe forms of trafficking in persons during the period of performance of the contract; (2) Procure commercial sex acts during the period of performance of the contract; or (3) Use forced labor in the performance of the contract. (c) Contractor requirements. The Contractor shall-- (1) Notify its employees of-- (i) The United States Government's zero tolerance policy described in paragraph (b) of this clause; and (ii) The actions that will be taken against employees for violations of this policy. Such actions may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment; and (2) Take appropriate action, up to and including termination, against employees or subcontractors that violate the policy in paragraph (b) of this clause. (d) Notification. The Contractor shall inform the Contracting Officer immediately of-- (1) Any information it receives from any source (including host country law enforcement) that alleges a Contractor employee, subcontractor, or subcontractor employee has engaged in conduct that violates this policy; and (2) Any actions taken against Contractor employees, subcontractors, or subcontractor employees pursuant to this clause. (e) Remedies. In addition to other remedies available to the Government, the Contractor's failure to comply with the requirements of paragraphs (c), (d), or (f) of this clause may result in-- (1) Requiring the Contractor to remove a Contractor employee or employees from the performance of the contract; (2) Requiring the Contractor to terminate a subcontract; (3) Suspension of contract payments; (4) Loss of award fee, consistent with the award fee plan, for the performance period in which the Government determined Contractor non-compliance; (5) Termination of the contract for default or cause, in accordance with the termination clause of this contract; or (6) Suspension or debarment. (f) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (f), in all subcontracts. (g) Mitigating Factor. The Contracting Officer may consider whether the Contractor had a Trafficking in Persons awareness program at the time of the violation as a mitigating factor when determining remedies. Additional information about Trafficking in Persons and examples of awareness programs can be found at the website for the Department of State's Office to Monitor and Combat Trafficking in Persons at http://www.state.gov/g/tip. Quote MUST be good for 30 days after Request for Quote closing date. Questions concerning this quote must be submitted at least 5 days prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered. The contractor shall not hire any individual to perform work on Joint Base Lewis-McChord or any other Government installation under this contract unless such individual is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. The contractor shall comply with 8 USC 1324a, 8 CFR Part 274a, and any other laws and regulations pertaining to the employment of aliens. The contractor shall, upon request by the Contracting Officer, present documentary evidence acceptable to the Contracting Officer that the employee(s) named or identified in the request is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. Such documentation shall be presented to the Contracting Officer within three (3) working days after the contractor's receipt of the request for documentation. If acceptable documentary evidence is not provided within the required time, the contractor shall not allow the affected employee(s) to perform work on Fort Joint Base Lewis-McChord or any other Government installation under this contract until after such acceptable documentary evidence is presented to the Contracting Officer. Removal of any employee(s) from performance of work pursuant to this provision shall not relieve the contractor of the responsibility to perform all work under this contract in a timely manner. Contact ClientServices @ FedBid.com or call 1-877-9FEDBID to address any questions for quotes utilizing FedBid. Contact the specialist listed in the solicitation to address any questions concerning any other request for quotes. This is a Request for Quotes under Federal Acquisition Regulation 12, Acquisition of Commercial Items using FAR 13 Simplified Acquisition Procedures. The following provisions and clauses apply: Clause Description FAR 52.212-1 Instructions to Offers I commercial Items. Incorporated by reference FAR.212-2 Evaluation-Commercial Items Incorporated by reference FAR 52.212-3 Offeror Representations and Certification- Commercial Items Incorporated in Full Text FAR 52.212-4 Contract Terms and Conditions-Commercial Items Incorporated by reference FAR 52.212-5 Contract Terms and conditions Required to Implement Statutes or Executive Incorporated in Full Text Orders-Commercial Items FAR 52.209-7 Information Regarding Responsibility Matters Incorporated by reference FAR 52.252-2: This award incorporates one or more clauses by reference, with the Clauses Incorporated same force and affect as if they were given in full text. Upon request the Contracting Officer will make their full text available. Also the full text of a clause may be accessed electronically at this address http://farsite.hill.af.mil/vffara.htm Wherever the words "offer", "proposal", "offerors", or similar terms are used in this solicitation, they shall be read to mean "quote", "quotation", "quoter", ?vendor? or similar corresponding term to reflect that this solicitation is a Request for Quotations, not a Request for Proposals or an Invitation for Bids. Quotes must be submitted per unit price. Multiple awards will not be made; therefore, quotes that cover less than all the items and quantities in this solicitation will be rejected as non-responsive. New equipment/parts only. No remanufactured products. In order to enhance the efficiency of the procurement process, the Government intends to evaluate only the lowest priced quote to determine if the quote is technically acceptable and whether the vendor has acceptable or neutral past performance. If the lowest priced quote is reasonably priced and technically acceptable and the vendor has acceptable or neutral past performance, the Government intends to make an award to that vendor and no other quote will be evaluated. If the lowest priced offer is not technically acceptable, the vendor does not have acceptable or neutral past performance, or both, then the Government will evaluate the second lowest priced quote for technical acceptability and acceptable or neutral past performance. This method will continue until the lowest priced, technically acceptable quote, by a vendor with acceptable or neutral past performance, is determined. Quotes will be evaluated based on price and technical acceptability. Quoter certifies that the product quoted meets or exceeds all minimum requirements as stated in the Request for Quotes. Quotes must be submitted per unit price and total price. Multiple awards will not be made; therefore, quotes that cover less than all the items and quantities in this quote will be rejected as non-responsive. The contract price includes all applicable Federal, state, and local taxes and duties. FOB Destination CONUS (Continental U.S.) The contractor shall stamp or mark the supplies delivered or otherwise furnish notice with the supplies of the existence of a warranty. Markings shall include (i) a brief statement that a warranty exists, (ii) the substance of the warranty, (iii) its duration, and (iv) who to notify if the supplies are found to be defective. Procedures for commercial vehicle access to YTC are subject to change without prior notice. Current access information may be obtained by calling (509) 577-3236. As of 15 January 2002, the following requirements apply. Commercial vehicle access to YTC will be allowed only at the Main Gate (Exit 26 from I-82) on Monday through Friday. This gate will be open for inbound commercial vehicle access and inspection between 0700 hours and 1530 hours. The gate is closed on weekends (Saturdays and Sundays). All commercial vehicles will be searched. The Contractor should anticipate delays in getting commercial vehicles on YTC. If the commercial vehicle is carrying a load of cement concrete or hot asphalt concrete for delivery, the driver shall notify the gate guard as soon as possible and request that the vehicle be given priority for being searched; however, the Government does not guarantee that the vehicle will be given priority. THE FOLLOWING INFORMATION IS PROVIDED TO ASSIST YOU, AND WILL HELP TO EXPEDITE PAPERWORK AND PAYMENT. a. Only one delivery will be accepted against each line item. Backorders will NOT be accepted on individual line items. b. Deliver on or before date specified. Deliveries will be accepted Monday through Friday (except Holidays) from 7:30 A.M. to 2:30 P.M. to Block 15 of the Purchase Order. Notify the individual in Block 16 of any delay encountered (due to strikes, factory backorders, etc.) and give revised delivery date if possible. c. Mark outside of all cartons. Put packing list inside cartons. Show the order number assigned, the PR number shown at the end of each item, and the quantity shipped. All items will be identified by the part number by attached tag and/or stamped identification. d. On direct shipments, have the supplier or manufacturer cite our order number on packages. This eliminates delay caused by trying to determine the firm awarded the original order. Unless otherwise specified in this contract, the contractor shall obtain any necessary licenses and permits, give all notices, and comply with any applicable Federal, State, County, and municipal laws, codes, and regulations in connection with this award. The contractor shall not make news releases or otherwise provide information relative to the performance of this contract or information relative to any incident occurring on JBLM without prior approval of the Contracting Officer. (EFFECTIVE 1 JULY 2012) Access and General Protection/Security Policy and Procedures. This standard language text is for contractor employees with an area of performance within an Army controlled installation, facility or area. Contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

65--HRIM MANOMETRY CATHETER WITH 32 PRESSURE CHANNELS AND 16 IMPEDANCE CHANNELS

Department of Veterans Affairs, VA South Texas Health Care System | Published March 9, 2015  -  Deadline March 13, 2015
cpvs

This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and a written solicitation will not be issued. The solicitation number is VA257-15-Q-0615. This acquisition is issued as a Request for Quote (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-75, effective June 24, 2014. The associated North American Industrial Classification System Code (NAICS) for this procurement is 339112. This acquisition is solicited as unrestricted. Network Contracting Office 17 requests responses from qualified sources capable of providing the following item(s): B.2 Price/Cost Schedule Item Information ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 1 UNI-ESO-WG1A1 HRIM CATHETER - High Resolution Impedance Manometry Catheter with 32 pressure channels and 16 Impedance channels. 2.00 EA __________________ __________________ GRAND TOTAL __________________ B.3 Delivery Schedule ITEM NUMBER QUANTITY DELIVERY DATE 1 SHIP TO: South Texas Veterans HCS Audie L. Murphy VA Hospital 7400 Merton Minter Blvd San Antonio ,TX 78229 4404 2.00 30 ARO MARK FOR: Rosemarie Velasquez rose.velasquez@va.gov 210-617-5300 X14165 Delivery: _30 Days after award Delivery to the VA South Texas Healthcare System, 7400 Merton Minter Blvd, San Antonio, TX 78229-4404. The following FAR and VAAR Clauses and provisions in their latest editions apply to this solicitation. 52.212-1, Instructions to Offerors-Commercial Items. 52.212-2, Evaluation Commercial Items. Technical acceptability to meet the Governments requirement, Past performance, delivery and price. Technical and past performance, when combined are less important than price. 52.212-3 Offeror Representations and Certifications - Commercial Items. Offerors must include a completed copy of Representations and Certifications with their offer. 52.212-4 Contract Terms and Conditions - Commercial Items. 52.204-7 Central Contractor Registration 52.219-6, Notice of Total Small Business Set-Aside 52.219-13, Notice of Set-Aside Orders 52.222-50 Combatting Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.233-3 Protest After Award 52.233-4 Applicable Law for Breach of Contract Claim The following clauses will be incorporated in full text. 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items The following clauses shall be considered marked within 52.212-5 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-6 Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. 52.222-3, Convict Labor 52.222-19, Child Labor - Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-22 Previous Contracts Compliance Report 52.222-25 Affirmative Action Compliance 52.222-26 Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration 52.219-28, Post Award Small Business Program Representation 52.252-1, Solicitation Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 52.252-2, Clauses Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 852.203-70, Commercial Advertising 852.211-70 Service Data Manuals 852.211-73 Brand name or equal 852.237-70 Contractor Responsibilities "Texas" shall be inserted into the fill in 852.246-70 Guarantee 852.273-74, Awards Without Exchanges The Government intends to award a firm fixed price contract resulting from this combined synopsis/solicitation. All offerors must be registered in the System for Award Management (SAM) prior to award (www.sam.gov). Quotes are being requested and a written solicitation will not be issued. Paper copies of this solicitation will not be issued and telephone requests or fax requests for the solicitation will not be accepted. Quotes must include company name, company DUNS number, and point of contact information. All responsible sources should submit quotes to Kevin Johnson via e-mail: kevin.johnson8@va.gov by Friday March 13, 2015, 10:00 AM CST.

Z--DUST CONTROL AT YAKIMA TRAINING CENTER

Department of the Army, FedBid | Published March 11, 2015  -  Deadline March 25, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is UNAWRD-15-Q-9779 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-80. The associated North American Industrial Classification System (NAICS) code for this procurement is 238990 with a small business size standard of $15.00M.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-03-25 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yakima, WA 98901 The MICC Joint Base Lewis McChord requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: Dust Control - Airfield Areas. See attached Performance Work Statement. Period of Performance: 1 May - 29 May 2015. Sellers are reminded that, in accordance with Supply and Small Services Branch Special Instruction 14, a complete bid response will include submission with bid documents of a copy of label, cut-sheet or other descriptive literature for the specific brand of dust control product offered which meets the requirements stated in the Performance Work Statement., 140992, SQUARE YARDS; LI 002: Dust Control - Tank Trail Areas. See attached Performance Work Statement. Period of Performance: 1 May - 29 May 2015., 176366, SQUARE YARDS; LI 003: Dust Control - Range Operations Areas. See attached Performance Work Statement. Period of Performance: 1 May - 29 May 2015., 10892, SQUARE YARDS; LI 004: Contract Manpower Reporting. See attached Performance Work Statement. Contractor shall prepare a contract manpower report covering the period from date of award through 30 September 2015, and submit the report no later than 31 October 2015., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Joint Base Lewis McChord intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Joint Base Lewis McChord is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The Contracting Officer (KO) at Mission and Installation contracting Office, Joint Base Lewis-McChord is the only person authorized to approve changes or modify any of the requirements under this contract, and notwithstanding anything contained elsewhere in this contract, the said authority remains solely with the KO. In the event the Contractor or contract employee effects any such change at the direction of any person other than the KO, the change will be considered to have been without authority, and no adjustment will be made in the contract price under the Changes clause or any other clause to cover any increase in costs incurred as a result thereof. A protest to a U.S. Army Materiel Command forum is considered a ?protest to the agency?, as described in FAR 33.103. The HQAMC Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an alternative dispute resolution forum, rather than filing a protest with the Government Accountability Office or another external forum. The proper address for AMC level protests is: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or e-mail: usarmy.redstone.usamc.mbx.protests@mail.mil If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number (703) 806-8866 or 8875 Packages sent by FedEx or UPS should be addressed to: HQ Army Material Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. As prescribed in 22.1705(a), insert the following clause: COMBATING TRAFFICKING IN PERSONS (FEB 2009) (a) Definitions. As used in this clause-- Coercion means-- (1) Threats of serious harm to or physical restraint against any person; (2) Any scheme, plan, or pattern intended to cause a person to believe that failure to perform an act would result in serious harm to or physical restraint against any person; or (3) The abuse or threatened abuse of the legal process. Commercial sex act means any sex act on account of which anything of value is given to or received by any person. Debt bondage means the status or condition of a debtor arising from a pledge by the debtor of his or her personal services or of those of a person under his or her control as a security for debt, if the value of those services as reasonably assessed is not applied toward the liquidation of the debt or the length and nature of those services are not respectively limited and defined. Employee means an employee of the Contractor directly engaged in the performance of work under the contract who has other than a minimal impact or involvement in contract performance. Forced Labor means knowingly providing or obtaining the labor or services of a person-- (1) By threats of serious harm to, or physical restraint against, that person or another person; (2) By means of any scheme, plan, or pattern intended to cause the person to believe that, if the person did not perform such labor or services, that person or another person would suffer serious harm or physical restraint; or (3) By means of the abuse or threatened abuse of law or the legal process. Involuntary servitude includes a condition of servitude induced by means of-- (1) Any scheme, plan, or pattern intended to cause a person to believe that, if the person did not enter into or continue in such conditions, that person or another person would suffer serious harm or physical restraint; or (2) The abuse or threatened abuse of the legal process. Severe forms of trafficking in persons means-- (1) Sex trafficking in which a commercial sex act is induced by force, fraud, or coercion, or in which the person induced to perform such act has not attained 18 years of age; or (2) The recruitment, harboring, transportation, provision, or obtaining of a person for labor or services, through the use of force, fraud, or coercion for the purpose of subjection to involuntary servitude, peonage, debt bondage, or slavery. Sex trafficking means the recruitment, harboring, transportation, provision, or obtaining of a person for the purpose of a commercial sex act. (b) Policy. The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not-- (1) Engage in severe forms of trafficking in persons during the period of performance of the contract; (2) Procure commercial sex acts during the period of performance of the contract; or (3) Use forced labor in the performance of the contract. (c) Contractor requirements. The Contractor shall-- (1) Notify its employees of-- (i) The United States Government's zero tolerance policy described in paragraph (b) of this clause; and (ii) The actions that will be taken against employees for violations of this policy. Such actions may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment; and (2) Take appropriate action, up to and including termination, against employees or subcontractors that violate the policy in paragraph (b) of this clause. (d) Notification. The Contractor shall inform the Contracting Officer immediately of-- (1) Any information it receives from any source (including host country law enforcement) that alleges a Contractor employee, subcontractor, or subcontractor employee has engaged in conduct that violates this policy; and (2) Any actions taken against Contractor employees, subcontractors, or subcontractor employees pursuant to this clause. (e) Remedies. In addition to other remedies available to the Government, the Contractor's failure to comply with the requirements of paragraphs (c), (d), or (f) of this clause may result in-- (1) Requiring the Contractor to remove a Contractor employee or employees from the performance of the contract; (2) Requiring the Contractor to terminate a subcontract; (3) Suspension of contract payments; (4) Loss of award fee, consistent with the award fee plan, for the performance period in which the Government determined Contractor non-compliance; (5) Termination of the contract for default or cause, in accordance with the termination clause of this contract; or (6) Suspension or debarment. (f) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (f), in all subcontracts. (g) Mitigating Factor. The Contracting Officer may consider whether the Contractor had a Trafficking in Persons awareness program at the time of the violation as a mitigating factor when determining remedies. Additional information about Trafficking in Persons and examples of awareness programs can be found at the website for the Department of State's Office to Monitor and Combat Trafficking in Persons at http://www.state.gov/g/tip. Quote MUST be good for 30 days after Request for Quote closing date. Questions concerning this quote must be submitted at least 5 days prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered. The contractor shall not hire any individual to perform work on Joint Base Lewis-McChord or any other Government installation under this contract unless such individual is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. The contractor shall comply with 8 USC 1324a, 8 CFR Part 274a, and any other laws and regulations pertaining to the employment of aliens. The contractor shall, upon request by the Contracting Officer, present documentary evidence acceptable to the Contracting Officer that the employee(s) named or identified in the request is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. Such documentation shall be presented to the Contracting Officer within three (3) working days after the contractor's receipt of the request for documentation. If acceptable documentary evidence is not provided within the required time, the contractor shall not allow the affected employee(s) to perform work on Fort Joint Base Lewis-McChord or any other Government installation under this contract until after such acceptable documentary evidence is presented to the Contracting Officer. Removal of any employee(s) from performance of work pursuant to this provision shall not relieve the contractor of the responsibility to perform all work under this contract in a timely manner. Contact ClientServices @ FedBid.com or call 1-877-9FEDBID to address any questions for quotes utilizing FedBid. Contact the specialist listed in the solicitation to address any questions concerning any other request for quotes. This is a Request for Quotes under Federal Acquisition Regulation 12, Acquisition of Commercial Items using FAR 13 Simplified Acquisition Procedures. The following provisions and clauses apply: Clause Description FAR 52.212-1 Instructions to Offerors - Commercial Items. FAR.212-2 Evaluation-Commercial Items FAR 52.212-3 Offeror Representations and Certification- Commercial Items FAR 52.212-4 Contract Terms and Conditions-Commercial Items FAR 52.212-5 Contract Terms and Conditions Required to Implement (Full text Statutes or Executive Orders-Commercial Items FAR 52.209-7 Information Regarding Responsibility Matters FAR 52.252-1 Solicitation Provisions Incorporated by Reference. This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://www.acquisiiton.gov/FAR http://Farsite.hill.af.mil FAR 52.252-2 Clauses Incorporated by Reference. This award incorporates one or more clauses by reference, with the Clauses Incorporated same force and affect as if they were given in full text. Upon request the Contracting Officer will make their full text available. Also the full text of a clause may be accessed electronically at this address http://farsite.hill.af.mil/vffara.htm FAR 52.222-41 Service Contract Labor Standards FAR 52.222-42 Statement of Equivalent Wage Rates for Federal Hires Employee Class Monetary Wage & Fringe Benefits ENVIRONMENTAL TECHNICIAN GS-7 $19.59 + $7,10 LABORER, WG-2 $12.57 + $4.56 TRUCKDRIVER, MEDIUM TRUCK WG-7 $20.37 + $7.38 FAR 52.222-55 Minimum Wages Under Executive Order 13658 Wherever the words "offer", "proposal", "offerors", or similar terms are used in this solicitation, they shall be read to mean "quote", "quotation", "quoter", ?vendor? or similar corresponding term to reflect that this solicitation is a Request for Quotations, not a Request for Proposals or an Invitation for Bids. Wherever the words "offer", "proposal", "offerors", or similar terms are used in this solicitation, they shall be read to mean "quote", "quotation", "quoter", ?vendor? or similar corresponding term to reflect that this solicitation is a Request for Quotations, not a Request for Proposals or an Invitation for Bids. Quotes must be submitted per unit price. Multiple awards will not be made; therefore, quotes that cover less than all the items and quantities in this solicitation will be rejected as non-responsive. In order to enhance the efficiency of the procurement process, the Government intends to evaluate only the lowest priced quote to determine if the quote is technically acceptable and whether the vendor has acceptable or neutral past performance. TECHNICAL ACCEPTABILITY WILL BE DETERMINED BASED UPON THE SELLER PROVIDING DESCRIPTIVE LITERATURE OF THE SPECIFIC BRAND OF PRODUCT OFFERED WHICH MEETS THE REQUIREMENTS STATED IN THE PERFORMANCE WORK STATEMENT. If the lowest priced quote is reasonably priced and technically acceptable and the vendor has acceptable or neutral past performance, the Government intends to make an award to that vendor and no other quote will be evaluated. If the lowest priced offer is not technically acceptable, the vendor does not have acceptable or neutral past performance, or both, then the Government will evaluate the second lowest priced quote for technical acceptability and acceptable or neutral past performance. This method will continue until the lowest priced, technically acceptable quote, by a vendor with acceptable or neutral past performance, is determined. Quotes will be evaluated based on price and technical acceptability. Quoter certifies that the product quoted meets or exceeds all minimum requirements as stated in the Request for Quotes. The contract price includes all applicable Federal, state, and local taxes and duties. Procedures for commercial vehicle access to YTC are subject to change without prior notice. Current access information may be obtained by calling (509) 577-3236. As of 15 January 2002, the following requirements apply. Commercial vehicle access to YTC will be allowed only at the Main Gate (Exit 26 from I-82) on Monday through Friday. This gate will be open for inbound commercial vehicle access and inspection between 0700 hours and 1530 hours. The gate is closed on weekends (Saturdays and Sundays). All commercial vehicles will be searched. The Contractor should anticipate delays in getting commercial vehicles on YTC. If the commercial vehicle is carrying a load of cement concrete or hot asphalt concrete for delivery, the driver shall notify the gate guard as soon as possible and request that the vehicle be given priority for being searched; however, the Government does not guarantee that the vehicle will be given priority. Unless otherwise specified in this contract, the contractor shall obtain any necessary licenses and permits, give all notices, and comply with any applicable Federal, State, County, and municipal laws, codes, and regulations in connection with this award. The contractor shall not make news releases or otherwise provide information relative to the performance of this contract or information relative to any incident occurring on JBLM without prior approval of the Contracting Officer. (a) The Contractor shall comply with agency personal identity verification procedures identified in the contract that implement Homeland Security Presidential Directive-12 (HSPD-12), Office of Management and Budget (OMB) guidance M-05-24, and Federal Information Processing Standards Publication (FIPS PUB) Number 201. (b) The Contractor shall account for all forms of Government-provided identification issued to the Contractor employees in connection with performance under this contract. The Contractor shall return such identification to the issuing agency at the earliest of any of the following, unless otherwise determined by the Government; (1) When no longer needed for contract performance. (2) Upon completion of the Contractor employee?s employment. (3) Upon contract completion or termination. (c) The Contracting Officer may delay final payment under a contract if the Contractor fails to comply with these requirements. (d) The Contractor shall insert the substance of clause, including this paragraph (d), in all subcontracts when the subcontractor?s employees are required to have routine physical access to a Federally-controlled facility and/or routine access to a Federally-controlled information system. It shall be the responsibility of the prime Contractor to return such identification to the issuing agency in accordance with the terms set forth in paragraph (b) of this section, unless otherwise approved in writing by the Contracting Officer. (End of Clause)

Installation of Concrete Foundation in accordance with attached Statement of Work

Defense Logistics Agency, DLA Acquisition Locations | Published March 12, 2015  -  Deadline March 13, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement establishes the solicitation. Proposals are being requested and a formal solicitation will not be issued. Solicitation number SPM4A8-15-Q-0101 is issued as a request for quote (RFQ). This is notice of the Government's intent to issue a firm-fixed price contract under the authority of 10 U.S.C. 2304(c)(1) as implemented by FAR 6.2, full and open competition after exclusion of sources and incorporates provisions and clauses in effect through Federal Acquisition Circular 48 CFR 12.603. This requirement is a 100% Small Business Set-Aside requiring the product(s) to be domestically manufactured by a small business. Performance period/completion date is 10 days after receipt of order. FOB Destination; Inspection and Acceptance at Destination. Destination is Portsmouth, VA 23709. Award will be made as a firm-fixed price contract. The award shall be based on technically acceptable, lowest offer. Description of requirements: Line Item 0001 (1 EA); Installation of Concrete Foundation in accordance with attached Statement of Work Provisions at 52.212-1, Instructions to Offers - Commercial, 52.212-2, Evaluation - Commercial Items, 52.212-3, Offeror Representations and Certifications - Commercial Items be submitted with offer, 52.212-4, Contract Terms and Conditions - Commercial Items, 52.212-5, Contract Terms and Conditions Required to Implement Statutes of Executive Orders - Commercial Items, 52.232-33, Payment by Electronic Funds Transfer - System for Award Management (JUL 2013); 52.246-9061, Warranty of Industrial Plant Equipment (IPE) (FSG 34) (SEPT 2009) DLAD applies to this acquisition. Defense Priorities and Allocations System (DPAS): DOB9 All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Offers must be submitted to: Lauren.Butrico@dla.mil no later than the close of business E.S.T. listed as the closing response date. All proposal's received after the closing date listed may be considered "late" and may not be considered for award.

58--In Car Video System

Department of the Army, FedBid | Published March 13, 2015  -  Deadline March 20, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010650382 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-80. The associated North American Industrial Classification System (NAICS) code for this procurement is 334220 with a small business size standard of 750.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-03-20 16:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yakima, WA 98901 The MICC Joint Base Lewis McChord requires the following items, Brand Name or Equal, to the following: LI 001: Watch Guard 4RE-200-GPS-ZOM In Car Camera System Includes GPS, High definition Zoom (720P) forward facing camera, Infrared color cabin camera, DVR, integrated 200GB automotive grade hard drive, 16GB USB removable thumb drive, cabin microphone, 900 MHz Hi Fidelity wireless microphone, hardware & cabling, 1 yr. warranty. Includes Evidence Library Express software. See attached technical specifications for evalution criteria for brand name or equal., 10, EA; LI 002: Watch Guard 4RE-WRL-KIT-05C In Car 802.11n 5 GHz Wireless See attached technical specifications for evalution criteria for brand name or equal., 10, EA; LI 003: Radar Interface Cable Compatible with: Stalker, Decatur Genesis I and II Select, Kustom Eagle or Raptor, MPH Bee 3 See attached technical specifications for evalution criteria for brand name or equal., 12, EA; LI 004: KEY-ELB-SRV-300 Evidence Library 3 Server Software See attached technical specifications for evalution criteria for brand name or equal., 1, EA; LI 005: WAP-BLD-05G-001 Wi?Fi Access Point, 802.11n, 5GHz, Sector Antenna See attached technical specifications for evalution criteria for brand name or equal., 1, EA; LI 006: SVC-4RE-RMT-410 System Setup and Onsite Training 4RE Remote System Setup, Configuration, Testing and Training (Must be approved by RSM. Quantity represents number of sites) See attached technical specifications for evalution criteria for brand name or equal., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Joint Base Lewis McChord intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Joint Base Lewis McChord is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The Contracting Officer (KO) at Mission and Installation contracting Office, Joint Base Lewis-McChord is the only person authorized to approve changes or modify any of the requirements under this contract, and notwithstanding anything contained elsewhere in this contract, the said authority remains solely with the KO. In the event the Contractor or contract employee effects any such change at the direction of any person other than the KO, the change will be considered to have been without authority, and no adjustment will be made in the contract price under the Changes clause or any other clause to cover any increase in costs incurred as a result thereof. A protest to a U.S. Army Materiel Command forum is considered a ?protest to the agency?, as described in FAR 33.103. The HQAMC Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an alternative dispute resolution forum, rather than filing a protest with the Government Accountability Office or another external forum. The proper address for AMC level protests is: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or e-mail: usarmy.redstone.usamc.mbx.protests@mail.mil If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number (703) 806-8866 or 8875 Packages sent by FedEx or UPS should be addressed to: HQ Army Material Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. As prescribed in 22.1705(a), insert the following clause: COMBATING TRAFFICKING IN PERSONS (FEB 2009) (a) Definitions. As used in this clause-- Coercion means-- (1) Threats of serious harm to or physical restraint against any person; (2) Any scheme, plan, or pattern intended to cause a person to believe that failure to perform an act would result in serious harm to or physical restraint against any person; or (3) The abuse or threatened abuse of the legal process. Commercial sex act means any sex act on account of which anything of value is given to or received by any person. Debt bondage means the status or condition of a debtor arising from a pledge by the debtor of his or her personal services or of those of a person under his or her control as a security for debt, if the value of those services as reasonably assessed is not applied toward the liquidation of the debt or the length and nature of those services are not respectively limited and defined. Employee means an employee of the Contractor directly engaged in the performance of work under the contract who has other than a minimal impact or involvement in contract performance. Forced Labor means knowingly providing or obtaining the labor or services of a person-- (1) By threats of serious harm to, or physical restraint against, that person or another person; (2) By means of any scheme, plan, or pattern intended to cause the person to believe that, if the person did not perform such labor or services, that person or another person would suffer serious harm or physical restraint; or (3) By means of the abuse or threatened abuse of law or the legal process. Involuntary servitude includes a condition of servitude induced by means of-- (1) Any scheme, plan, or pattern intended to cause a person to believe that, if the person did not enter into or continue in such conditions, that person or another person would suffer serious harm or physical restraint; or (2) The abuse or threatened abuse of the legal process. Severe forms of trafficking in persons means-- (1) Sex trafficking in which a commercial sex act is induced by force, fraud, or coercion, or in which the person induced to perform such act has not attained 18 years of age; or (2) The recruitment, harboring, transportation, provision, or obtaining of a person for labor or services, through the use of force, fraud, or coercion for the purpose of subjection to involuntary servitude, peonage, debt bondage, or slavery. Sex trafficking means the recruitment, harboring, transportation, provision, or obtaining of a person for the purpose of a commercial sex act. (b) Policy. The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not-- (1) Engage in severe forms of trafficking in persons during the period of performance of the contract; (2) Procure commercial sex acts during the period of performance of the contract; or (3) Use forced labor in the performance of the contract. (c) Contractor requirements. The Contractor shall-- (1) Notify its employees of-- (i) The United States Government's zero tolerance policy described in paragraph (b) of this clause; and (ii) The actions that will be taken against employees for violations of this policy. Such actions may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment; and (2) Take appropriate action, up to and including termination, against employees or subcontractors that violate the policy in paragraph (b) of this clause. (d) Notification. The Contractor shall inform the Contracting Officer immediately of-- (1) Any information it receives from any source (including host country law enforcement) that alleges a Contractor employee, subcontractor, or subcontractor employee has engaged in conduct that violates this policy; and (2) Any actions taken against Contractor employees, subcontractors, or subcontractor employees pursuant to this clause. (e) Remedies. In addition to other remedies available to the Government, the Contractor's failure to comply with the requirements of paragraphs (c), (d), or (f) of this clause may result in-- (1) Requiring the Contractor to remove a Contractor employee or employees from the performance of the contract; (2) Requiring the Contractor to terminate a subcontract; (3) Suspension of contract payments; (4) Loss of award fee, consistent with the award fee plan, for the performance period in which the Government determined Contractor non-compliance; (5) Termination of the contract for default or cause, in accordance with the termination clause of this contract; or (6) Suspension or debarment. (f) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (f), in all subcontracts. (g) Mitigating Factor. The Contracting Officer may consider whether the Contractor had a Trafficking in Persons awareness program at the time of the violation as a mitigating factor when determining remedies. Additional information about Trafficking in Persons and examples of awareness programs can be found at the website for the Department of State's Office to Monitor and Combat Trafficking in Persons at http://www.state.gov/g/tip. Quote MUST be good for 30 days after Request for Quote closing date. Questions concerning this quote must be submitted at least 5 days prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered. The contractor shall not hire any individual to perform work on Joint Base Lewis-McChord or any other Government installation under this contract unless such individual is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. The contractor shall comply with 8 USC 1324a, 8 CFR Part 274a, and any other laws and regulations pertaining to the employment of aliens. The contractor shall, upon request by the Contracting Officer, present documentary evidence acceptable to the Contracting Officer that the employee(s) named or identified in the request is a citizen of the United States or is lawfully admitted into the United States and authorized to work in the United States. Such documentation shall be presented to the Contracting Officer within three (3) working days after the contractor's receipt of the request for documentation. If acceptable documentary evidence is not provided within the required time, the contractor shall not allow the affected employee(s) to perform work on Fort Joint Base Lewis-McChord or any other Government installation under this contract until after such acceptable documentary evidence is presented to the Contracting Officer. Removal of any employee(s) from performance of work pursuant to this provision shall not relieve the contractor of the responsibility to perform all work under this contract in a timely manner. Contact ClientServices @ FedBid.com or call 1-877-9FEDBID to address any questions for quotes utilizing FedBid. Contact the specialist listed in the solicitation to address any questions concerning any other request for quotes. This is a Request for Quotes under Federal Acquisition Regulation 12, Acquisition of Commercial Items using FAR 13 Simplified Acquisition Procedures. The following provisions and clauses apply: Clause Description FAR 52.212-1 Instructions to Offers I commercial Items. Incorporated by reference FAR.212-2 Evaluation-Commercial Items Incorporated by reference FAR 52.212-3 Offeror Representations and Certification- Commercial Items Incorporated in Full Text FAR 52.212-4 Contract Terms and Conditions-Commercial Items Incorporated by reference FAR 52.212-5 Contract Terms and conditions Required to Implement Statutes or Executive Incorporated in Full Text Orders-Commercial Items FAR 52.209-7 Information Regarding Responsibility Matters Incorporated by reference FAR 52.252-2: This award incorporates one or more clauses by reference, with the Clauses Incorporated same force and affect as if they were given in full text. Upon request the Contracting Officer will make their full text available. Also the full text of a clause may be accessed electronically at this address http://farsite.hill.af.mil/vffara.htm Wherever the words "offer", "proposal", "offerors", or similar terms are used in this solicitation, they shall be read to mean "quote", "quotation", "quoter", ?vendor? or similar corresponding term to reflect that this solicitation is a Request for Quotations, not a Request for Proposals or an Invitation for Bids. Quotes must be submitted per unit price. Multiple awards will not be made; therefore, quotes that cover less than all the items and quantities in this solicitation will be rejected as non-responsive. New equipment/parts only. No remanufactured products. In order to enhance the efficiency of the procurement process, the Government intends to evaluate only the lowest priced quote to determine if the quote is technically acceptable and whether the vendor has acceptable or neutral past performance. If the lowest priced quote is reasonably priced and technically acceptable and the vendor has acceptable or neutral past performance, the Government intends to make an award to that vendor and no other quote will be evaluated. If the lowest priced offer is not technically acceptable, the vendor does not have acceptable or neutral past performance, or both, then the Government will evaluate the second lowest priced quote for technical acceptability and acceptable or neutral past performance. This method will continue until the lowest priced, technically acceptable quote, by a vendor with acceptable or neutral past performance, is determined. Quotes will be evaluated based on price and technical acceptability. Quoter certifies that the product quoted meets or exceeds all minimum requirements as stated in the Request for Quotes. FAR 52.211-6 -- Brand Name or Equal is incorporated into this solicitation and any subsequent awards. To meet the Brand Name or Equal provision the Quoter must: (a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must? (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation. Quotes must be submitted per unit price and total price. Multiple awards will not be made; therefore, quotes that cover less than all the items and quantities in this quote will be rejected as non-responsive. The contract price includes all applicable Federal, state, and local taxes and duties. FOB Destination CONUS (Continental U.S.) The contractor shall stamp or mark the supplies delivered or otherwise furnish notice with the supplies of the existence of a warranty. Markings shall include (i) a brief statement that a warranty exists, (ii) the substance of the warranty, (iii) its duration, and (iv) who to notify if the supplies are found to be defective. THE FOLLOWING INFORMATION IS PROVIDED TO ASSIST YOU, AND WILL HELP TO EXPEDITE PAPERWORK AND PAYMENT. a. Only one delivery will be accepted against each line item. Backorders will NOT be accepted on individual line items. b. Deliver on or before date specified. Deliveries will be accepted Monday through Friday (except Holidays) from 7:30 A.M. to 2:30 P.M. to Block 15 of the Purchase Order. Notify the individual in Block 16 of any delay encountered (due to strikes, factory backorders, etc.) and give revised delivery date if possible. c. Mark outside of all cartons. Put packing list inside cartons. Show the order number assigned, the PR number shown at the end of each item, and the quantity shipped. All items will be identified by the part number by attached tag and/or stamped identification. d. On direct shipments, have the supplier or manufacturer cite our order number on packages. This eliminates delay caused by trying to determine the firm awarded the original order. Unless otherwise specified in this contract, the contractor shall obtain any necessary licenses and permits, give all notices, and comply with any applicable Federal, State, County, and municipal laws, codes, and regulations in connection with this award. The contractor shall not make news releases or otherwise provide information relative to the performance of this contract or information relative to any incident occurring on JBLM without prior approval of the Contracting Officer.