Call +44 800 9755 164

Public tenders for industrial in Mobile United States

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!

Indefinite Delivery Contract for the Regional Acquisition Environmental Tools, South Atlantic Division, U. S. Army Corps of Engineers to Provide Environmental Support to Military, Civil and Federal Agencies

Department of the Army, U.S. Army Corps of Engineers | Published January 8, 2016
cpvs

Work for Pool C Hazardous Toxic Radioactive Waste (HTRW)/ Design may include environmental compliance and restoration; hazardous, toxic and radioactive material/waste site investigations/assessments; remedial investigations and feasibility studies; treatability studies; pilot studies; remedial designs; risk assessments; sampling and analyses; data validation; electronic data management; geotechnical investigations; monitoring well installation; groundwater modeling; groundwater and surface water quality assessments; water reuse initiatives; vapor intrusion monitoring, assessment and modeling; design and technical services relating to water treatment plant, both potable and industrial; wastewater treatment plants, domestic and industrial; pumping and piping systems, both pressure and gravity flows; hydraulic modeling.

S&G 8077 Combination Padlock

Department of State, European Posts | Published August 4, 2016  -  Deadline August 19, 2016
cpvs

This is a combined synopsis/solicitation for commercial items.This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.The US EMBASSY IN BRUSSELS, BELGIUM is issuing this combined synopsis/solicitation as a request for quote (RFQ) using FAR Part 12, Acquisition of Commercial Item, & FAR Part 13, Simplified Acquisition Procedures. The North American Industrial Classification Systems (NAICS) code for this procurement is 423710.Description of Items/Services:Supply 250 x  S&G 8077 Combination Padlock with 5/16 inch shackle NSNInclude the estimated shipping cost to Freight Forwarder (FOB) to NJReponses/quotes MUST be received no later than 19 August 2016, 12:00 pm Eastern Time. Forward responses by Email to HenristLM@state.govOfferors must ensure that their company is registered with System for Award Management (SAM) prior to award. For information, refer to https://www.sam.gov/portal/public/SAMApplicable FAR provisions and Clauses in effect thru Federal Acquisitions Circular (FAC) 2005-89 

Seals NATO HQ

Department of State, European Posts | Published August 4, 2016  -  Deadline August 19, 2016
cpvs

This is a combined synopsis/solicitation for commercial items.This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.The US EMBASSY IN BRUSSELS, BELGIUM is issuing this combined synopsis/solicitation as a request for quote (RFQ) using FAR Part 12, Acquisition of Commercial Item, & FAR Part 13, Simplified Acquisition Procedures. The North American Industrial Classification Systems (NAICS) code for this procurement is 339950.Description of Items/Services:Manufacture the following Embassy seals:- 1 x Fabricated 3D seal, 1200 mm diameter, mirror polished stainless accents per Berlin Seal Design concept.TEXT: U.S. MISSION TO THE NORTH ATLANTIC TREATY ORGANIZATION- 2 x Joint Chiefs of Staff Seal and U.S. MISSION TO THE NORTH ATLANTIC TREATY ORGANIZATION - Seal, cast aluminium, 758 mm diameter- 4 x Joint Chiefs of Staff Seal, cast aluminium, 610 mm diameter- 1 x U.S. MISSION TO THE NORTH ATLANTIC TREATY ORGANIZATIONSeal, cast bronze, 400 mm diameter- 1 Vendor Art for Joint Chiefs of Staff seal- Estimated shipping to Freight Forwarder (FOB) to NJReponses/quotes MUST be received no later than 19 August 2016, 12:00 pm Eastern Time. Forward responses by Email to HenristLM@state.govOfferors must ensure that their company is registered with System for Award Management (SAM) prior to award. For information, refer to https://www.sam.gov/portal/public/SAMApplicable FAR provisions and Clauses in effect thru Federal Acquisitions Circular (FAC) 2005-89 

C--Indefinite Delivery Contract (IDC) for Architect and Engineering (A-E) Services for the Mobile District, U.S. Army Corps Of Engineers to Provide Environmental Support to Military, Civil, and Federal Agencies.

Department of the Army, U.S. Army Corps of Engineers | Published June 12, 2014  -  Deadline July 30, 2014
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. ALL QUESTIONS SHALL BE SUBMITTED VIA THE BIDDER INQUIRY IN PROJNET AS DESCRIBED IN THE SUBMISSION REQUIREMENTS BELOW. Point of Contact for this announcement is Mrs. Mary Breland. This notice is posted in its entirety and hereby serves as the official solicitation for this project. CONTRACT INFORMATION: Architect -Engineer (A-E) services are required for an Indefinite Delivery Contract (IDC) to provide environmental support to military, civil, and federal agencies. The A-E will be required to perform services at federal/military projects throughout the world, including the Continental United States, its territories, South and Central America and other world nations. Multiple awards will be made from this solicitation to a combination of Small Businesses and to offerors on an unrestricted basis. The unrestricted basis is open to all interested parties regardless of business size. The small business size standard is a maximum of $14 million in average annual receipts for the preceding 3 fiscal years. All firms responding to this solicitation MUST identify the category(s) for which they wish to be considered. Firms should state the word UNRESTRICTED or SMALL BUSINESS after the solicitation number in PART I, A, Block 3 of form SF 330. A separate response (SF 330) MUST be submitted for each category in which the firm wants consideration. It is the intent to award three (3) contracts on an unrestricted basis and one (1) to Small Business. Only firms considered highly qualified will be awarded a contract. No firm will receive more than one award. The value for each contract awarded on the unrestricted basis will not exceed $3,000,000 over the life of the contract. The intent is to award $1,000,000 in IDIQ contract capacity to a Small-Business. In the event that a contract cannot be awarded to one or the other category, the total of $10,000,000 in IDIQ contract capacity will be awarded to one or more highly qualified firms in the remaining category. Contracts awarded will not exceed a term of five (5) years. Rates will be negotiated for each 12-month period of the contract. Work under this contract to be subject to satisfactory negotiation of individual task orders. Selection of A-E firms is not based upon competitive bidding procedures, but rather upon the professional qualifications necessary for the performance of the required services. All interested A-E firms are reminded that, in accordance with the provisions of PL 95-507, they will be expected to place subcontracts to the maximum practicable extent consistent with the efficient performance of the contract with small and small disadvantaged firms. Large businesses selected for this contract must comply with FAR 52.219-9 regarding the requirement for a subcontracting plan for that part of the work it intends to subcontract. Large business firms selected for this contract will be required to submit a detailed subcontracting plan during contract negotiation. A firm fixed price contract will be negotiated. The North American Industry Classification System (NAICS) code for this action is 541330. PROJECT INFORMATION: A-E services provided under this contract will comply with, but are not limited to, any or all of the following: (a) Resource Conservation and Recovery Act (RCRA); Clean Air Act (CAA); Safe Drinking Water Act (SDWA); Clean Water Act (CWA); Toxic Substances Control Act (TSCA); Comprehensive Environmental Response, Compensation and Liability Act (CERCLA); National Environmental Policy Act (NEPA); Energy Policy Act 2005; compliance; pollution prevention; restoration; Department of Defense Instruction; Executive Orders; policy, guidance, programmatic and operational program execution strategy; planning; permitting and technical support; environmental management systems; information technology tool refinement, customization, population and implementation; environmental training, outreach, strategy, and awareness; water compliance and reuse plans; vulnerability assessments; compliance assessments; multi media and single media facility audits; environmental baseline surveys; DoD Services; Medical Departments and health services support; audits and assessments; planning studies and evaluations; geographic information system support; compliance monitoring, recordkeeping and reporting. Additional projects may include range and training program support, solid waste, RCRA evaluations, and management plans; DoD awards development; sustainability program initiatives and planning; ozone depleting substance (ODS) evaluations and elimination plans; energy studies and audits; facility evaluations and audits; Leadership in Energy and Environmental Design (LEED) technical support and building commissioning; programmatic support of installation restoration and munitions response compliance cleanup programs; greenhouse gas initiatives; air quality monitoring, testing and permitting; air dispersion modeling; asbestos and lead-based paint sampling and report preparation; and real estate site assessments. (b) Operational Range Assessments for Department of Defense (DoD) installations; range environmental vulnerability assessments; Military Munitions Response Program; DoD Safety and Environmental Regulations and Guidance, other Department of Defense regulations and Executive Orders including but not limited to: DoD Directive 4715.11 -Environmental and Explosives Safety Management on Operational Ranges within the United States; DoD Directive 3200.15 - Sustainment of Ranges and Operating Areas; Sections 311-312 of the National Defense Authorization Act of FY02; DERP Management Guidance, September 2001. (c) Hazardous, toxic and radioactive material/waste site investigations/assessments; remedial investigations and feasibility studies; treatability studies; pilot studies; remedial designs; risk assessments; sampling and analyses; data validation; electronic data management; geotechnical investigations; monitoring well installation; groundwater modeling; groundwater and surface water quality assessments; water reuse initiatives; vapor intrusion monitoring, assessment and modeling. (d) Design and technical services relating to water treatment plant, both potable and industrial; wastewater treatment plants, domestic and industrial; pumping and piping systems, both pressure and gravity flows; hydraulic modeling. The majority of the work will be located in the United States; however, work may be located in Central or South America, Puerto Rico, the U.S. Virgin Islands, as well as locations throughout the world as may be assigned to the Mobile District. SELECTION CRITERIA: The selection criteria are listed below in descending order of importance (first by major criterion and then by each sub-criterion). Criteria A thru D are primary. Criterion E is secondary and will only be used as tie-breakers among technically equal firms. A. Professional Qualifications: The selected firm must have, either in-house or through consultants, the following disciplines: (1) Project Manager; (2) Environmental Engineer (registration required); (3) Chemist; (4) Geologist (registration required); (5) Biologist; (6) Certified Industrial Hygienist; (7) Chemical Engineer (registration required); (8) Certified Energy Manager (registration required); (9) Civil Engineer (registration required). In addition to the above disciplines the following specialist are also required. A specialist is defined as having a degree in engineering, geology, or science from an accredited university, has at least five (5) years recent and direct experience, and training in the area of specialization. These specialists are: (10) Air Quality Specialist; (11) Clean Water Act Specialist; (12) RCRA Specialist; and (13) GIS Specialist. Professional registration is required for the Geologist (Professional Geologist PG), all Engineering (Professional Engineer PE) disciplines, and the Certified Energy Manager (Associated Energy Engineers (AEE)). Resumes contained in Standard Form (SF) 330, PART I, Section E, shall be completed for each discipline. ROLE IN THIS CONTRACT, Block 13 under PART I, Section E must use the same discipline nomenclature as is listed in this announcement. If an individual will serve in more than one discipline, then those disciplines shall be clearly indicated in Block 13, PART I, Section E. The evaluation will consider the education, training, registration, overall experience, relevant experience, and longevity with the firm with respect to the proposed key disciplines. As well, the evaluation will consider the firm's recent (within 5 years of the solicitation issuance date) business history with proposed subcontractors. B. Specialized Experience and Technical Competence: (1) Demonstrated breadth, knowledge and recent (within 5 years of the solicitation issuance date) experience in the execution of complex environmental compliance, and pollution prevention to include strategy development, plans, data gathering, analysis, evaluations, studies, designs and permitting actions. (2) Demonstrated breadth, knowledge and recent (within 5 years of the solicitation issuance date) direct experience with analyzing and evaluating environmental regulations for implementing studies, designs, and program initiatives for the U.S. Army, U.S. Air Force, U.S. Marine Corps, U.S. Navy, DLA and other Department of Defense components, in compliance with DoD instruction, policy and guidance, as well as State, Federal and local criteria. (3) Demonstrated breadth, knowledge and recent (within 5 years of the solicitation issuance date) direct experience with installation sustainability and asset management, GIS and environmental database management in an enterprise environment; CAA, CWA, RCRA (C, D, and I) to include permitting, document updates, revisions, and regulatory coordination. (4) Demonstrated breadth, knowledge and recent (within 5 years of the solicitation issuance date) direct experience providing comprehensive programmatic support of policies, guidance and regulations, and implementation for various DoD services, Installation Management Agencies (IMA), Major Commands, sub-ordinate commands, ODEP, AEC, and/or other military and Federal agencies. C. Capacity to Accomplish the Work: Firms proposing under the unrestricted category shall demonstrate the capacity to accomplish at least four (4) $500,000 individual task orders simultaneously. Firms proposing under the small business category shall demonstrate the capacity to accomplish at least two (2) $500,000 individual task orders simultaneously. D. Past Performance: Past performance on Army and other DOD contracts with respect to cost control, quality of work and compliance with performance schedules. Evaluations will be based on established ACASS ratings and other credible documentation included in the SF 330. E. Small Business, Small Disadvantaged Business and Women-Owned Small Business Participation: Extent of participation of small businesses, small disadvantaged businesses, women-owned small businesses, historically black colleges and universities, and minority institutions in the proposed contract team, measured as a percentage of the total estimated effort. SUBMISSION REQUIREMENTS: Interested Architect-Engineer firms or joint ventures having the capabilities to perform this work as a prime contractor, may submit ONE (1) completed, bound paper copy of their SF 330 (Architect-Engineer Qualifications) for each category (i.e., Small Business, or Unrestricted) in which the firm wishes to be considered, to: U.S. Army Corps of Engineers, Mobile District, CESAM-EN-DW, ATTN: Mrs. Mary Breland, 109 St. Joseph Street, Mobile, AL 36602. SF 330 6/2004 edition must be used, and may be obtained from the Government Printing Office or from the following web site: http://www.gsa.gov/portal/forms/download/116486 All firms responding to this solicitation MUST identify the category they wish to be considered. Firms should state the word UNRESTRICTED or SMALL BUSINESS after the solicitation number in PART I, A. Block 3 of form SF 330. A separate response (SF 330) MUST be submitted for each category in which the firm wants consideration. All fonts shall be at least 12 or larger. Pages shall be 8-1/2 inches by 11 inches. PART I OF THE SF330 SHALL NOT EXCEED 50 PAGES FRONT SIDE ONLY. Blank sheets/tabs separating the sections within the SF 330 will not count against the maximum page count for PART I. Include DUNS number in SF330 PART I, Section B, Block 5. A firm located within the United States may obtain a DUNS number by calling Dun and Bradstreet at 1-866-705-5711 or via the Internet at http://www.dnb.com/us/. If the firm is located outside the United States, the local Dun and Bradstreet office should be contacted. The organization chart required in section D and the matrix required as Section G, Part I of the SF330 may be presented on a sheet up to 11 inches by 17 inches. If an 11 inch by 17 inch sheet is used it shall be neatly folded to 8-1/2 inches by 11 inches, bounded in the SF330 at the proper location, and counted as one page. A maximum of TEN (10) projects of the prime, the subcontractor(s), or both will be reviewed in PART I, Section F. Of these 10 a minimum of 6 projects from the prime must be completed. Use no more than one page per project. It shall be noted that a task order executed under an Indefinite Delivery Contract is considered a Project. The 10 projects shall specifically address the following areas of emphasis: 3 projects - Complex Environmental Compliance/Reporting/Permitting; 1 project - GIS/Data management; 2 projects - Clean Air Act; 2 projects - Clean Water Act; 1 project - Pollution Prevention; 1 project - Installation Sustainability/asset management. In Block G-26, along with the name, include the firm with whom the person is associated. A Part II is required for each branch office of the Prime Firm and any Subcontractors that will have a key role in the proposed contract. Submittals must be received no later than 3:00 P.M. Central Time on 31 July 2014. Regulation requires that the Selection Board not consider any submittals received after this time and date. Late proposal rules in FAR 15.412 will be followed for submittals received after 3:00 P.M. Central Time on the closing date specified in this announcement. This is not a request for proposal. Solicitation packages are not provided. The A-E Evaluation Board (Selection Board) is tentatively scheduled TO COMMENCE ON 04 August 2014. As required by acquisition regulations, interviews for the purpose of discussing prospective contractor qualifications for the contract will be conducted only for those firms considered most highly qualified after submittal review by the selection board. Interviews will be conducted by telephone and will most likely occur the same week that the Selection Board convenes. Phone calls and personal visits for the purpose of discussing this solicitation are not allowed. ALL QUESTIONS SHALL BE SUBMITTED VIA THE BIDDER INQUIRY PORTAL in ProjNet at http://www.projnet.org/projnet. Questions should be submitted no later than 18 JULY 2014 at 3:00 p.m. Central Time to allow time for a response. On this date and time the portal will be closed. For questions, no other means of communication, e-mail, fax, or telephone will be accepted. To submit and review inquiries, firms will need to be current registered users of the ProjNet system. To register, go to the link above, click the BID tab, select BIDDER INQUIRY, select agency USACE, enter the Bidder Inquiry Key for this solicitation listed below, and your e-mail address, and then click login. Complete all required information and then click CREATE USER. Verify that information on the next screen is correct and click CONTINUE. From this page you can view all bidder inquiries for this solicitation or add an inquiry. Offerors or Bidders will receive an acknowledgement of their question via e-mail, followed by a response to their question after it has been processed by our team. The Solicitation Number is: W91278-14-R-0062. The Bidder Inquiry Key is: 56RZ8X-HFYP6X. Specific Instructions for ProjNet Bid Inquiry Access: 1. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. 2. Identify the Agency. This should be marked as USACE. 3. Key. Enter the Bidder Inquiry Key listed above. 4. Email. Enter the email address you would like to use for communication. 5. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form. 6. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system. 7. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system. Specific Instructions for Future ProjNet Bid Inquiry Access: 1. For future access to ProjNet, you will not be emailed any type of password. You will utilize your Secret Question and Secret Answer to log in. 2. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. 3. Identify the Agency. This should be marked as USACE. 4. Key. Enter the Bidder Inquiry Key listed above. 5. Email. Enter the email address you used to register previously in ProjNet. 6. Click Continue. A page will then open asking you to enter the answer to your Secret Question. 7. Enter your Secret Answer and click Login. Once this is completed you are now logged into the system. A-E firms are requested to review the solicitation and amendments in their entirety, as well as to review the Bidder Inquiry Portal for previous questions and responses, prior to submission of a new inquiry on the Portal. CAUTION: ANY INQUIRY SUBMITTED AND ANSWERED WITHIN THIS SYSTEM, WILL BE ACCESSIBLE TO VIEW BY ALL INTERESTED OFFERORS OR BIDDERS ON THIS SOLICITATION. The call center for the ProjNet operates weekdays from 8 AM to 5 PM U.S. Central Time Zone. The telephone number is 1-800-428-HELP. To verify your submittal has been delivered, you may e mail Mrs. Mary Breland at: mary.f.breland@usace.army.mil. To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instructions on registering with the SAM, please see the SAM Web site at https://www.sam.gov/portal/public/SAM/.

C--Architect-Engineer (A-E) Services for an Indefinite Delivery Contract (IDC) with the U.S. Army Corps of Engineers, Mobile District, South Atlantic Division for Healthcare Facilities In Support of the U.S. Army Medical Command (MEDCOM)

Department of the Army, U.S. Army Corps of Engineers | Published August 17, 2015  -  Deadline September 17, 2015
cpvs

ALL QUESTIONS SHALL BE SUBMITTED VIA THE BIDDER INQUIRY PORTAL IN PROJNET AS DESCRIBED IN THE SUBMISSION REQUIREMENTS BELOW. Point Of Contact for this announcement is Ms. Allison Jones. This notice is posted in its entirety and hereby serves as the official solicitation for this project. CONTRACT INFORMATION: A-E services are required for an Indefinite Delivery Contract (IDC) with the U.S. Army Corps of Engineers, Mobile District, South Atlantic Division for Healthcare Facilities In Support of the U.S. Army (USA) Medical Command (MEDCOM). This announcement is open to all businesses regardless of size. This announcement will potentially result in up to five (5) contract awards in combination from the Small Business Set Aside and Unrestricted basis. All firms responding to this solicitation MUST identify which category they are submitting. Firms must state the words UNRESTRICTED or SMALL BUSINESS after the solicitation number in PART I, A. Block 3 of form SF 330. A separate proposal MUST be submitted for each category in which the firm wants consideration. If no category is indicated as required, the submittal will be entered as UNRESTRICTED. No one firm will receive more than one award as a result of this solicitation. Selection of A-E firms is not based upon competitive bidding procedures, but rather upon the professional qualifications necessary for the performance of the required services. Only firms considered most highly qualified will be awarded a contract. It is the intent of the Government to award up to three (3) $10,000,000 contracts from the Unrestricted, and up to two (2) $5,000,000 from the Small Business Set Aside. The total IDC contract value is not to exceed $40,000,000. Work under this contract will be subject to satisfactory negotiation of individual task orders with firm fixed prices. In the event that a contract cannot be awarded in the restricted category, the IDIQ contract capacity will be awarded to other highly qualified firms in the unrestricted category. The contracts will be awarded for a term not to exceed a total of five (5) years. Rates will be negotiated for each 12-month period of the contract. The small business size standard is a maximum of $15 million of average annual receipts for its preceding three (3) fiscal years. All interested Unrestricted A-E firms are reminded that, in accordance with the provisions of PL 95-507, they will be expected to place subcontracts to the maximum practicable extent consistent with the efficient performance of the contract with small and small disadvantaged firms. Large businesses selected for this contract must comply with FAR 52.219-9 regarding the requirement for a subcontracting plan for that part of the work it intends to subcontract. Large businesses selected for this contract will be required to submit a detailed subcontracting plan during contract negotiation. The North American Industry Classification System (NAICS) code for this action is 541330. PROJECT INFORMATION: A-E Services provided under this contract will support MEDCOM facilities mission for categories 500 (medical treatment) facilities, category 300 (medical research), and related facilities at various installations. The service provided will include but are not limited to programming, planning, assessment, and design of healthcare projects in the areas of master planning; healthcare planning; space evaluation and programming; military construction (MILCON) project planning; medical equipment planning; assessments and studies; code and joint commission deficiency tabulations; facility condition assessments; environmental assessments; economic analyses; design for new construction and expansions/renovations to existing medical facilities; interior design; and project support services (submittal review, transition and initial outfitting planning and support, commissioning, scope development, on site Quality Assurance inspections, etc). Other design services will include building renovations and additions, new construction, sub-area development planning, preparation of project definition and programming documents, charrettes, preparation of the technical portions of design-build solicitations, value engineering studies, environmental permit applications, and the development of construction plans and specifications for new vertical and horizontal construction projects. The vast majority of the work will be on military installations, however work may also include a variety of projects under the Interagency/International Services (IIS) program. The selected firm must have the capability thru In-House staff or consultants to perform surveying and mapping, geotechnical and subsurface utility investigations, and hazardous material testing and abatement/remediation planning. Design drawings shall be produced in the AutoCAD 2012, Autodesk Revit Building Information Modeling (BIM), or MicroStation 8xm format. The format will be specific to each project and will be specified in the AE scope of work for the specific project. If BIM is required for a specific project, all BIM models shall be delivered in their proprietary format along with exported IFC models, and 2D CAD drawings (construction documents). Technical specifications will be produced with SPECSINTACT software using Unified Facilities Guide Specifications. Responses to design review comments will be provided using the Government web-based Design Review and Checking System (ProjNet) located at www.projnet.org. The vast majority of the work will be located in the southeastern United States; however work may be located in any of the 50 states, Central or South America, Puerto Rico, the U.S. Virgin Islands, and other locations that may be assigned to the Mobile District and South Atlantic Division, U.S. Army Corps of Engineers. SELECTION CRITERIA: The selection criteria are listed below in descending order of importance (first by major criterion and then by each sub-criterion). Criteria A thru D are primary. Criterion E thru G are secondary and will only be used as a tie-breaker among technically equal firms. A. Professional Qualifications: The selected firm must have, either in-house or through consultants, the disciplines listed below, with registration required where applicable. Resumes (Block E of the SF 330) must be provided for these disciplines, including consultants. ROLE IN THIS CONTRACT, Block 13 under PART I, Section E must use the same discipline nomenclature as listed in this announcement. If an individual will serve in more than one discipline, then those disciplines shall be clearly indicated in Block 13, PART I, Section E. Evaluation of each discipline will consider education, registration, relevant experience, and longevity with the firm. Disciplines required are as follows: (1) Project / Task Order Manager; (2) Architect, registration required; (3) Civil Engineer, registration required, preferred in the States covered by the Mobile District's Area of Responsibility; (4) Mechanical Engineer, registration required; (5) Electrical Engineer, registration required; (6) Structural Engineer, registration required; (7) Fire Protection Engineer (four years experience with all current nationally recognized codes such as National Fire Protection Agency (NFPA), with special emphasis on NFPA 101 Life Safety with at least two years experience in the design of sprinkler fire protection systems); (8) Interior Design (registered architect with specialized experience in interior design, or registered interior designer or NCIDQ certified interior designer) with evidence of experience by both the firm and key personnel in comprehensive interior design, including space planning, pre-wired workstations, furniture specification, and knowledge of the acquisition process including applicable FAR and funding limitations; (9) Communications Specialist, Registered Communications Distribution Design (RCDD); (10) Geotechnical Engineer; (11) Environmental Engineer specializing in Lead Based Paint (LBP) and Asbestos Containing Material (ACM) Survey and Remediation (A resume for a Certified Industrial Hygienist or an OSHA Certified Technician with five years of experience may be submitted in lieu of a registered Environmental Engineer); (12) Corrosion Engineer (NACE Certified Corrosion Specialist, NACE Certified Cathodic Protection Specialist, or registered professional corrosion engineer) with a minimum of five years experience (type specific) in the design of cathodic protection systems; (13) Surveyor, registration required, preferred in the States covered by the Mobile District's Area of Responsibility; (14) Landscape Architect; (15) Master Planner, AICP or other equivalent Certification; (16) Cost Estimators. The firm's cost engineering specialist(s) must be certified by a professional organization, such as AACE, ICEC, and PCEA. Resumes for the firm's and/or consultant's cost engineering or estimating specialist(s) for the architectural, structural, civil, mechanical, and electrical disciplines must specifically identify his (their) competence and experience in these disciplines. One cost estimating specialist may demonstrate experience in one or more disciplines, however, if an individual will serve in more than one discipline then those disciplines shall be clearly indicated in Block 13, PART I, Section E. The selected firm shall demonstrate a maximum of ten (10) relevant projects of the prime, the subcontractor(s), or both, not to exceed the past five (5) years, will be reviewed in PART I, Section F. The prime must have completed or accomplished at a minimum six (6) of the projects (either as the prime or subcontractor) themselves. Use no more than one page single sided per project. A Project is defined as a project performed under a single, stand-alone contract and/or a task order issued under an existing Indefinite Delivery/Indefinite Quantity (ID/IQ) contract(s). It shall be noted that a task order executed under an ID/IQ is considered a single project, not the Indefinite Delivery Contract itself. Do not combine multiple task orders to create a single project example. Combining multiple task orders to create a single project will not be compliant with the solicitation criteria, and it will not be evaluated or considered. The Indefinite Delivery Contract number and individual task order number associated with the provided project in the title must be included for each project. If the project is not 100% complete, then note the current percentage and estimated date when project will be completed. Clearly indicate the firm's role and type of project, for example, Full Design, Design-Build Request For Proposal Development, or Contractor's Designer of Record. Use no more than one page single sided per project. B. Specialized Experience and Technical Competence: In PART I, Section H, provide a narrative describing the firm's experience in the following: (1) Design of CONUS military projects, both vertical and horizontal, including production of programming documents, and construction plans and specifications; (2) Design of government and/or commercial facilities; (3) Design of Industrial facilities; (4) Preparation of Cost Estimates and Value Engineering Studies; (5) Approach for Designing High Performance and Sustainable Buildings; (6) Application of Department of Defense Antiterrorism / Force Protection and Security Engineering Construction Standards; (7) Preparation of permit applications relating to construction projects; (8) Topographical and Hydrographical Surveys; (9) Geotechnical and Subsurface Utility Investigations; (10) Master Planning and Preparation of DD Form 1391s; (11) Hazardous Materials Surveys and Abatement/Remediation Planning; (12) Facility Condition Assessments. C. Past Performance: Past performance on government contracts with respect to cost control, quality of work and compliance with performance schedules. Evaluations will be based on established CPARS ratings of the Prime Contractor and other credible documentation included in the SF 330. D. Knowledge of Locality: Approach to Design in the Mobile District's CONUS Area of Responsibility. E. Small Business, Small Disadvantaged Business Participation: Extent of participation of small businesses, small disadvantaged businesses, women-owned small businesses, historically black colleges and universities, and minority institutions in the proposed contract team, measured as a percentage of the total estimated effort. F. Geographic Proximity: Firms shall provide office location from which task orders shall be implemented. G. Volume of DoD Contract Awards: Firms shall provide the volume of work awarded by DoD agencies during the previous 12 months. SUBMISSION REQUIREMENTS: Interested Architect-Engineer firms or joint ventures having the capabilities to perform this work are invited to submit one (1) completed and bound paper copy and one (1) complete pdf on CD of their SF 330 (Architect-Engineer Qualifications) proposal for each category (i.e., Small Business or Unrestricted) to: U.S. Army Corps of Engineers, Mobile District, CESAM-EN-TS, ATTN: Ms. Allison Jones, 109 St. Joseph Street, Mobile, AL 36602. SF 330, current edition, must be used, and may be obtained from the Government Printing Office or from the following web site: http://www.gsa.gov/portal/forms/download/116486. All firms responding to this solicitation MUST identify in which category they are submitting. All firms must state the words UNRESTRICTED or SMALL BUSINESS after the solicitation number in PART I, A. Block 3 of form SF 330. If no category is indicated as required, the submittal will be entered as UNRESTRICTED. A separate response (SF 330) MUST be submitted for each category in which the firm wants consideration. Include DUNS number in Block 5 of the SF330 PART I, Section B. All fonts shall be at least 11 or larger in Arial (not Arial Narrow) to include text, tables and figures. Pages shall be 8-1/2 inches by 11 inches. The Organization Chart required in Section D and the Matrix required as Section G, PART I of the SF330 may be presented on a sheet up to 11 inches by 17 inches folded neatly to 8-1/2 inches by 11 inches, bound in the SF330 at the proper location, and counted as one page. PART I OF THE SF330 SHALL NOT EXCEED 60 PAGES FRONT SIDE ONLY. Blank sheets/Tabs separating the sections within the SF 330 will not count in the page-count maximum for PART I. In Block G-26, along with the name, include the firm with which the person is associated. A Part II is required for each branch office of the Prime Firm and any Subcontractors that will have a key role in the proposed contract. This is not a request for proposal. Solicitation packages are not provided. Submittals must be received no later than 3:00 P.M. Central Time on 17 September 2015. The Government will not accept any submittals received after this date and time. The Selection Board will not consider any submittals received after this date and time. The A-E Evaluation Board (Selection Board) is tentatively scheduled COMMENCE ON OR ABOUT 05 October 2015. As required by acquisition regulations, interviews for the purpose of discussing the qualifications of prospective contractors for the contract will be conducted only for those firms considered most highly qualified after submittal review by the Selection Board. Interviews will be conducted by telephone and will most likely occur the same week that the Selection Board convenes. Interview scheduling is at the discretion of the Selection Board. Phone calls and personal visits for the purpose of discussing this solicitation are not allowed. ALL QUESTIONS ABOUT THIS SOLICITATION SHALL BE SUBMITTED VIA THE BIDDER INQUIRY PORTAL IN PROJNET at https://www.projnet.org. Questions shall be submitted no later than 03 September 2015 at 3:00 p.m. Central Time to allow time for a response, and amendment to the solicitation if necessary. On this date and time the portal will be closed. For questions, no other means of communication (e-mail, fax, or telephone) will be accepted. To submit and review inquiries, firms will need to be current registered users of the ProjNet system. To register, go to the link above, click the BID tab, select BIDDER INQUIRY, select agency USACE, enter the Bidder Inquiry Key for this solicitation listed below, and your e-mail address, and then click login. Complete all required information and then click CREATE USER. Verify that information on the next screen is correct and click CONTINUE. From this page you can view all bidder inquiries for this solicitation or add an inquiry. Offerors or Bidders will receive an acknowledgement of their question via e-mail, followed by a response to their question after it has been processed by our team. The Solicitation Number is: W91278-15-R-0036. The Bidder Inquiry Key is: YT8ISJ-BE7MU7. Firms are requested to review the Bidder Inquiry Portal for previous questions and responses, prior to submission of a new inquiry on the Portal. Caution: Any inquiry submitted and answered within this system, will be accessible to view by ALL interested FIRMS on this solicitation. The call center for the ProjNet operates weekdays from 8 AM to 5 PM U.S. Central Time Zone. The telephone number is 1-800-428-HELP. To verify your submittal has been delivered, you may e mail Ms. S. Allison Jones at: sally.a.jones@usace.army.mil. To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instructions on registering with the SAM, please see the SAM Web site at https://www.sam.gov/portal/public/SAM. Contracting Office Address: USACE District, Mobile, P. O. Box 2288, 109 Saint Joseph Street (zip 36602), Mobile, AL 36628-0001 Place of Performance: USACE District, Mobile P. O. Box 2288, 109 Saint Joseph Street (zip 36602) Mobile AL 36628-0001 US Point of Contact: Allison Jones, (251) 690-3442

HMRT A/C Repair and Removal

Department of Homeland Security, United States Coast Guard (USCG) | Published August 26, 2016  -  Deadline September 2, 2016
cpvs

STATEMENT OF WORKUNITED STATES COAST GUARD HAZARDOUS MATERIALS RESPONSE TRAILER AIR CONDITIONING UNITS REMOVAL AND REPLACEMENT 1.0 Purpose.The United States Coast Guard (USCG), Gulf Strike Team has a requirement for the removal and replacement of four (4) roof top mounted air conditioning units for one (1) each Hazardous Materials Response Trailer (HMRT). 2.0 Scope. 2.1 This Statement of Work (SOW) defines the removal and replacement of the air conditioning unit on one (1) HMRT, which consists of four (4) roof top mounted Condensers and the four (4) internally mounted Evaporators, to include the removal, preparation of the existing surfaces (inside and out) on the HMRT for installation, installation of the new units, and testing to insure proper operation of cooling and heating systems. 2.2 The existing air conditioning unit to be removed and replaced is Model Number 2KC30ABA, Voltage 208-230/1/60, F. L. AMPS C.13.4H, manufactured by Nordic Air, Inc. There will be a requirement to remove the existing R-22 refrigerant. The disposal of the R-22 must be in compliance with all State and Federal Environmental Protection Agency (EPA) Regulations. 2.3 The desired replacement unit is the HDT/Nordic Air Model #2KR28 heavy duty, self-contained air conditioning unit or an approved equivalent. The new unit must contain the R-407C refrigerant to be in compliance with all State and Federal EPA Regulations. 2.4 The contractor shall comply with all Occupational Safety and Health Administration (OSHA) Industrial Safety Practices concerning the removal and replacement of these air conditioning units. 2.5 The contractor shall be a licensed Heating, Venting and Cooling (HVAC) contractor and shall provide all parts, materials, labor, tooling, supervision, and containment equipment required, with the exception of Government Furnished Materials (GFM) detailed in section 4.0 of this SOW. 2.6 The HMRT is a mobile unit. The work to be performed will either be accomplished on-site at the USCG Gulf Strike Team or at the contractor's facility, if located with a reasonable distance. The reasonable distance will be determined by the Contracting Officer and/or the Government Point of Contac (POC) taking into account mileage, travel expenses, etc. 3.0 Major Tasks. 3.1 Removal and replacement of the old units. Removal and replacement of the four (4) Condensers and the four (4) Evaporators will be conducted either at the contractor's facility or on location at the USCG Gulf Strike Team, as approved by the Contracting Officer and/or Government POC. 3.2 Once the units have been removed and disposed of properly, the contractor is required to clean and prepare the existing surfaces of the HMRT (inside and outside), prior to installation of the new unit. 3.3 Installation of the new units. Contractor shall install the new units ensuring that the units have been correctly installed and wired. 4.0 Government Furnished Material (GFM).If the work is to be performed on-site at the USCG Gulf Strike Team location, the Government will provide 1) Electricity (if needed) and 2) Any necessary lifting capabilities to gain access to the HMRT. Any other items will require prior approval by the Contracting Officer or Government POC prior to commencement of work. 5.0 Quality Assurance. The USCG reserves the right to review the contractor's work anytime during the performance of this contract. The Government POC will complete a final inspection and acceptance of all work performed. 6.0 Tobacco Policy. 6.1 If the work to be performed on-site, the USCG prohibits the use of smoking tobacco and smokeless tobacco in the workplace in order to protect the health of all it workers. The workplace includes any area inside a building or facility over which the USCG has custody and control where work is performed by active duty personnel, civilian employees, or personnel under contract to the USCG. 6.2 Contractors may only use tobacco products in designated smoking areas and are accountable for appropriately discarding their smoking material and/or spit tobacco. Tobacco spit and residue shall be held in containers with sealing lids to prevent odor and accidental spills and disposed of in a sanitary manner which prevents public exposure. Contractor employees found abusing the Tobacco Policy shall be subject to removal. 7.0 Period of Performance. It is estimated that the work being performed will take three (3) business days to complete whether on-site or at the contractor's facilities. For the work being performed on-site, work period shall be from 7:00 a.m. to 4:00 p.m. EST, Monday through Friday. Work to be performed outside these hours must be requested in advance and approved by the Contracting Officer prior to commencement of work. All work will take place in designated work areas. 8.0 Mishap/Incident Notification/Reporting. 8.1 For work being performed on-site, the contractor shall comply with all applicable Federal, State, and Local Safety Laws. Emergency services are available by dialing 911 from a facility phone or cellular phone. The contractor shall notify the Government POC or the Safety and Environmental Health Office (SEHO) within one (1) hour of all mishaps or incidents. This will include all exposure data and all accidents resulting in death, traumatic injury, or occupational disease, damage to property, materials, supplies, and equipment incidental to work performed under this contract. Note: It is the sole responsibility of the contractor to report recordable injuries of its employees to OSHA. 8.2 A written report of the safety mishap/incident shall be sent within three (3) calendar days to the Government POC, who shall forward it to the Safety Office. For information not available at the time of initial written report, the contractor shall provide the remaining information no later than twenty (20) calendar days after the mishap, unless an extension is granted by the SEHO. Mishap notifications shall contain, at a minimum, the following information: • Contract, Contract Number, Name and Title of Person(s) reporting.• Date, Time and Exact Location of accident/incident. • Brief narrative of accident/incident (Events leading to accident/incident).• Cause of accident/incident, if known.• Nomenclature of equipment and personnel involved in accident/incident.• Estimated cost of accident/incident (material and labor to removal/replace corrective actions (taken or proposed).• Other pertinent information. 8.3 If requested by the Government POC, the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records, until released by the SEHO. 9.0 Environmental and Spills/Releases. 9.1 The contractor shall comply with all applicable Federal, State and Local Environmental Laws. If the contractor spills or releases any hazardous substance into the environment, the contractor or its agent shall immediately report the incident to the local Fire Department (See Section 12.0). The incident must also be immediately reported to the Government POC. If the amount released meets or exceeds the reportable quantity as listed in 40 CFR 302, the contractor or its agent shall immediately notify the National Response Center (1-800-424-8802). The liability for the spill or release of hazardous substances rests solely with the contractor and its agent. 9.2 If the work to be performed in on-site, the contractor shall provide the Contracting Officer and the Government POC proof of General Liability Insurance or Pollution Legal Liability Insurance for both the contractor and any sub-contractors prior to the commencement of services. The contractor shall also be liable for damages to Government property in the event such damages are found to be due to negligence on the part of the contractor and shall be a no cost to the Government. 10.0 Safety Requirements. 10.1 The contractor is solely responsible for compliance with all Federal, State, and Local laws, including, but not limited to, the OSHA Act (Public Law 91-596) and the resulting standards, and OSHA Standard 29 CFR 1910. The Government shall assume no liability of responsibility for the contractor's compliance or non-compliance with such requirements. In addition, the contractor is required to flow down the safety requirements/specifications to all sub-contracts/sub-contractors. Safety requirements listed herein that do not concern contractor's operations or services as mutually agreed by the Contracting Officer and the contractor shall be deleted by a modification to the contract. 10.2 The contractor shall be subject to safety inspections of its worksites by the Government. Contractor safety records shall be available up request by the Contracting Officer. The contractor shall be liable for, and shall indemnify and hold harmless, the USCG against all action or claims pertaining to the "personal" safety requirements of its employees. The USCG will NOT provide contractors with respiratory protection, safety shoes, prescription eyewear or any other Personal Protection Equipment (PPE). The contractor shall be responsible for determining and providing the correct PPE required, prior to any performance of work. 10.3 If the work to be performed is on-site, a hazardous material control program shall be in effect to inform employees of potential hazards if and when chemicals are used. The Safety Data Sheets (SDS) will be maintained on file IAW OSHA 29 CFR 1910-1200 and will be provided to contractor and sub-contractor employees for review of safety and health information. The SDS's for any hazardous materials that will be used in the performance of this contract shall be submitted to the Government POC prior to the contractor/sub-contract's arrival onboard the facility. Hazardous materials storage is the responsibility of the contractor and shall be in accordance with NFPA, as well as, Federal, State, and Local Environmental and Safety Regulations. 11.0 Liability Insurance. 11.1 The contractor shall procure and maintain insurance during the entire period of performance under this contract, IAW FAR 52.228-5, entitled "Insurance - Work on a Government Installation". The following minimum insurance is required: 11.1.1 Worker's Compensation and Employer's Liability. As required by applicable Federal and State, Worker's Compensation and Occupational Disease Statutes. 11.1.2 General Liability: Bodily injury liability insurance coverage written on the comprehensive form of policy of at least $200,000 per person and $500,000 per occurrence. 11.1.3 Automobile Liability Insurance: Written on a comprehensive form of policy of at least $200.000 per person for bodily injury and $500,000 per occurrence for property damage. 11.1.4 Pollution Legal Liability Insurance: Required for both the contractor and any sub-contractors prior to the commencement of services. The contractor shall also be liable for damages to Government property in the event such damages are found to be due to negligence on the part of the contractor and shall be at no cost to the Government. 11.2 Prior to commencement of work hereunder, the contractor shall furnish to the Contracting Officer, a certificate or written statement of the above required insurance. The policies evidencing required insurance shall contain an endorsement to the effect that cancellation or any material change in the policies adversely affecting the interests of the Government shall not be effective until thirty (30) days after written notice has been given and approved by the Contracting Officer. 12.0 Contractor Identification. All contractor and sub-contractor personnel will be required to wear and display badges provided by the contractor/sub-contractor identifying them as contractor/sub-contractor employee. 13.0 Contracting Officer's Authority. No oral or written statement by any person other than the Contracting Officer will, in any manner or degree, modify or otherwise affect the terms of this contract. The Contracting Officer is the only person authorized to approve changes in any of the requirements under this contract, and, notwithstanding any provisions contained elsewhere in this contract, said authority remains solely with the Contracting Officer. In the event the contractor effects such change at the direction of any person other than the Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase in cost incurred as a result thereof. 15.0 Government Point Of Contact's Information. The Government Point of Contact (POC) will be available to answer questions and coordinate the performance of work during regular business hours (Monday through Friday, excluding Government holidays, between the hours of 7:00 am to 4:00 pm). POC information will be provided at contract award. 16.0 Inspection and Acceptance.The Government reserves the right to inspect the contractor's work at any time during the installation of the systems. The project will not be considered complete until the Government POC has inspected and accepted the work accomplished by the contractor.

81--CONEX CONTAINERS FOR MOBILE, ALABAMA

Department of the Army, FedBid | Published September 2, 2015  -  Deadline September 8, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W912JA-15-T-0092 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83-2. The associated North American Industrial Classification System (NAICS) code for this procurement is 332439 with a small business size standard of 500.00 employees.This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-09-08 12:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Mobile, AL 36608 The National Guard - Alabama requires the following items, Meet or Exceed, to the following: LI 001: Used standard 20' CONEX for Mobile, Alabama The customer is looking for a standard 20' container. Paint color is a preference and not a deal breaker. Containers must be water tight and lockable. Equipment will be used for general storage purposes. Color preference is tan or green. No special paint and no special tie-downs requested. Customer does not have the ability to unload this equipment. Seller must contact delivery POC prior to delivery attempt to coordinate for someone to be at the drop location. Ship to address is: 9055 TANNER WILLIAMS ROAD MOBILE AL 36608-9757 POC information to be provided at time of award., 4, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Alabama intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Alabama is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

16--Aircraft Intercom System

Department of the Army, FedBid | Published August 14, 2015  -  Deadline August 19, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W912JA-15-R-0021 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83-2. The associated North American Industrial Classification System (NAICS) code for this procurement is 334290 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-08-19 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Mobile, AL 36608 The National Guard - Alabama requires the following items, Exact Match Only, to the following: LI 001: David Clark U3800 Master Station, 4, EA; LI 002: David Clark C38-20 Power Cord, 4, EA; LI 003: David Clark RRH10-66 ANG Modified H10-66 Headset, 4, EA; LI 004: David Clark U38-06 Dual Headset Intercom Station, 24, EA; LI 005: David Clark C35-08 Belt Station 8ft Coiled Cord, 52, EA; LI 006: David Clark H35-30 Dual Ear Over the Head Headset, 48, EA; LI 007: David Clark C38-12 Jumper Cord 12ft, 12, EA; LI 008: David Clark C38-08 Jumper Cord 8ft, 12, EA; LI 009: 1664 Pelican Case with Padded Dividers-Substitutes are welcome for this item only., 4, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Alabama intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Alabama is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

75--Fiber Laser Maker

Department of the Army, FedBid | Published April 28, 2016  -  Deadline April 29, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W912JA-16-T-0025 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87. The associated North American Industrial Classification System (NAICS) code for this procurement is 323111 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-04-29 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Mobile , AL 36608 The National Guard - Alabama requires the following items, Brand Name or Equal, to the following: LI 001: FIBER20FD: 20W Galvo Fiber Marking Laser FFP New (CATS) tool systems require marking per DA-PAM 385-90, PARA 2-8 d (3)(e). This is the most economical and efficient manner to mark this large number of tools and meet additional aircraft maintenance equipment marking requirements. These lasers do not require costly consumable supplies., 1, EA; LI 002: FIBER20: 20W Galvo Fiber Marking Laser FFP New (CATS) tool systems require marking per DA-PAM 385-90, PARA 2-8 d (3)(e). This is the most economical and efficient manner to mark this large number of tools and meet additional aircraft maintenance equipment marking requirements. These lasers do not require costly consumable supplies., 2, EA; LI 003: FIBGLASSES 1064NM Laser Safety Glasses FFP Fiber Laser Safety Glasses required- two sets per unit, 6, EA; LI 004: 5GFAN: 5th Gen H-Series Exhaust fan FFP Laser Exhaust Fans provided by suggested vendor at no cost for each laser marker purchased., 3, EA; LI 005: Shipping FFP, 3, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Alabama intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Alabama is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
  • 1