Public tenders for industrial in Fort-bragg-nc-28310 United States

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!
IndustrialUnited Statesfort-bragg-nc-28310

HD Security Cameras- 8th MCD

Department of the Navy, United States Marine Corps | Published March 28, 2016
cpvs

  This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation M00263-16-T-1014 is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provision and clauses are those in effect through the Federal Acquisition Circular (FAC) 2008-86 and DFAR public notice 20151230. The Regional Contracting Officer, Marine Corps Recruit Depot, Parris Island, SC, intends to solicit and award a Firm Fixed Price contract to obtain one HD Video Surveilance package defined inSection B and C. The North American Industrial Classification System (NAICS) code for this requirement is 561621 and the business size standard is $20.5 Million. All applicable Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) provisions and clauses are contained herein. Offerors responding to this announcement shall submit their quotes in accordance with FAR Part 12 and 13 and additional instructions, conditions, and notices to offerors provided in this RFQ.The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government. The following is the basis for award: Lowest Price Technically Acceptable (LPTA). The apparent successful Offeror shall have a satisfactory past performance (i.e., a rating of Acceptable). This procurement is being conducted under FAR Part 12 and 13 procedures. All offerors shall provide three (3) current and relevant references. Past Performance data shall be reviewed and the quality and usefulness determined as it applies to performance confidence. Failure to comply may result in not being considered for award. The past performance references and the potential sources ofperformance data is verified through Government sources such as the Past Performance Information Retrieval System (PPIRS). A current reference is an order within the past 36 months. A relevant reference is an order of approximately the same size and complexity. If an Offeror does not submit any or less than three (3) references, the Offeror shall affirmatively state it only has a certain number of references or state it has none at all. Such Offerors shall be assigned a past performance rating of "Acceptable," if the Offeror affirmatively states it has noreferences.  Technical Acceptability is defined as meeting all requirements listed in the solicitation. You must address each requirement. Offerors shall be ranked in order of lowest price to highest price. The lowest-priced offer shall be evaluated first. If the lowest-priced offer is technically acceptable, no other offers will be evaluated.OFFEROR SHALL PROVIDE A COMPLETED COPY OF FAR 52.212-3 OR ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION (ORCA) RECORD WITH THEIR QUOTE. Offerors are also required to be registered in the System for Award Management (SAM) and the Wide Area Work Flow (WAWF) database. SAM replaces CCR.FedReg, ORCA, and EPLS. If you have been using those systems or wish toregister, please visit the SAM website at http://SAM.gov. The provisions and clauses can be found at FAR website http://arnet.gov/far/ and DFARS website http://acq.osd.mil/dpap/dars/dfars/index.htm.The Offeror is required to provide their DUNS Number and Commercial and Government Entity (CAGE) code with their quote. The CAGE code entered must be for that name and address provided by the Vendor. For WAWF registration, please visit their website at http://wawf.eb.mil or for WAWF assistance, please contact 1-866-618-5988. Offerors must be registered in all systems prior to receiving an award for this solicitation, or for any future awards. Offerors responding to this announcement shall submit their quotations in accordance with FAR 52.212 -1. All responsible business sources may submit a response which, if timely received, will be considered by the agency. It is the intent of the Government to issue one award; however, the Government reserves the right to issue multipleawards. Any/all questions on this RFQ shall be received by this office by 31 March 2016 @ 1:00pm.

Farm Type Tractor Lease

Department of the Army, U.S. Army Corps of Engineers | Published May 4, 2016
cpvs

Pre-Solicitation Notice Tractor Lease Fort Gibson Lake, Oklahoma W912BV-16-T-0116 U.S. Army Corps of Engineers, Southwestern Division (SWD), Tulsa District (SWT) intends to issue a commercial solicitation, W912BV-16-T-0116 to perform a farm type tractor lease for Fort Gibson Lake, Oklahoma. Contractor is to provide one (1) John Deere 5085M Tractor or equivalent with an installed front end loader, materials bucket, and pallet fork. The solicitation will be issued as a small business set-aside. The North American Industrial Classification System (NAICS) Code is 333111, the FSC is W024, the SIC is 3523, and the applicable Small Business Size Standard, as established by the U.S. Small Business Administration, is 1,250 employees or smaller. . The resulting contract will be issued on a Firm Fixed Price basis for a base period and four (4) option periods to the responsible offeror whose offer is conforming to the requirements of the solicitation and will be most advantageous to the Government considering price. The solicitation will be issued via Internet only on Feb Biz Opps Website at http://www.fbo.gov. It is the contractors' responsibility to monitor the above-listed internet address for any posted changes. Issue date is on or about 5/5/2016. Quote is anticipated to be due on or about 5/25/2016. Contractors must be registered and current with System for Award Management (SAM) in order to receive a Government contract award. To register, the SAM Internet address is: http://www.sam.gov. Award is anticipated to be made to the lowest priced, responsible offeror who can deliver the tractor within 30 days of award. Award is anticipated to be completed within five days of close of solicitation.   Any questions and inquiries related to this solicitation shall be submitted through Bidder's Inquiry only. The Solicitation Number is: W912BV-16-T-0116 The Bidder Inquiry Key is: 96SQ25-8VW2M8 TULSA DISTRICT CORPS OF ENGINEERSDOUGLAS BUFFINGTON, CECT-SWT-E1645 S. 101ST EAST AVETULSA, OK 74128-4609918-669-7078FAX: (918) 669-7495  

Fort Bliss Hospital Replacement Staff Parking B West Lot, Texas

Department of the Army, U.S. Army Corps of Engineers | Published February 29, 2016
cpvs

This is not a solicitation. A solicitation will be issued at a later date. This construction contract will be procured through an RFP process; set-aside for Service-Disabled Veteran-Owned Small Business (SDVOSB) competition. The project includes providing materials, equipment, and labor required for the construction of Parking Package B.  This work includes grading (finish grade only in the parking lots and to subgrade in areas not paved); storm sewers and structures that serve parking lot; concrete curb and gutter; asphalt paving; concrete paving; parking lot light conduits and sleeving ; conduits and sleeving for emergency phones and security cameras; sleeving for irrigation systems; installation and maintenance of erosion control and SWPPP; adjustment of utility manholes, valves, and vaults as necessary; and incidental related work as shown in the plans. The magnitude of construction is estimated to be between $5,000,000 and $10,000,000. The RFP is anticipated to be issued on or about March 21, 2016. North American Industrial Classification System (NAICS) code applicable to this project is 237310. The Product Service Code is Y1LB. The Small Business Size Standard is $36.5 Million. After solicitation issuance, contractors may view and or download this solicitation, specifications and all amendments at the following internet address: www.fbo.gov it is the Offerors responsibility to monitor the Federal Business Opportunities website and or any other official government website for amendments to the solicitation. You must be registered with the System for Award Management (SAM), to receive a Government contract award. You may register on the SAM Website at http://www.sam.gov The Primary Point of Contract for this project is Mrs. Angelynn L. Gunn, Contract Specialist, email is Angelynn.L.Gunn@usace.army.mil. The Government reserves the right to use only the Internet as notification of any amendments to this solicitation. It is the offerors responsibility to view the website daily for amendments to the solicitation. Accordingly, prospective contractors may view and/or download the solicitation and all amendments from the Federal Business Opportunities Website address after solicitation issuance.

Standard Advanced Dewar Assembly II (239)

Department of the Army, Army Contracting Command | Published September 28, 2015
cpvs

This Delivery Order was awarded under an Exception to Fair Opportunity based the authority of FAR 16.505(b)(2)(i)(e). Justification for Other than Full and Open Competition Control Number:15-BELV-010 was approved by the CECOM Special Competition Advocate on 24 April 2015. The reason for the justification is that Public Law 113-76 appropriated funds for the purpose of maintaining the Armys Second generation Forward Looking Infrared Industrial Base for FYs 2015 and 2016 by running the DRS Network & Imaging Systems, LLC focal plane array reactor, exercising key processes and producing Standard Advanced Dewar Assemblies at least quarterly for eight (8) quarters after award.

Second Generation Forward Looking Infrared Support Services and Hardware for Industrial Mobilization

Department of the Army, Army Contracting Command | Published September 28, 2015
cpvs

This contract modification was awarded on an other than full and open competition basis, pursuant to the authority of Title 10 U.S.C. § 2304(c)(3) and FAR 6.302-3.

65--PELCO easiGlow Discharge System

Department of Veterans Affairs, Bronx VAMC (NAL) | Published July 29, 2015
cpvs

Document Type: Combined Solicitation Solicitation Number: VA243-15-Q-1190 ACTION TYPE: N/A Original Response Date: July 31, 2015 Classification Code: 65 NAICS CODE- 334516 Contracting Office Information: Department Of Veterans Affairs Network Contracting Office 3 130 W. Kingsbridge Road Rm. 9b-16 Bronx NY 10468 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is VA243-15-Q-1190 and is issued as a request for quotes (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-61. The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 with a small business size standard of 500. This requirement is [Unrestricted] and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on July 31, 2015 3:00Pm. Eastern Time. FOB Destination shall be Multiples shipping information. Delivery will be made within 60 days ARO to Northport VAMC 79 Middleville Road ATTN: Gina Perri Administrative Officer Research Service, Northport, NY 11768-2200. If there are any questions regarding this solicitation, please contact Samantha.Henderson@va.gov by email or 718-836-6600. This procurement is for the purchase and installation of wireless ventilator alarms for Northport VAMC, VISN 3 CLIN001 Pelco easiGlow Discharge System CLIN002 GD4 Vacuum System CLIN003 Oil Mist Filter for Rotary Pump CLIN004 PELCOrUltra 19 Rotary Pump Oil, 1 Liter CLIN005 PELCOr TEM Grid Holder Block for 25 TEM grids Bid MUST be good for 60 calendar days after close of Buy. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. .

70--BJACH STATDX LICENSE

Department of the Army, Army Contracting Command, MICC | Published June 2, 2015
cpvs

This contract action was accomplished using other than competitive procedures because there is only one responsible source due to patent or data rights requirements, and no other supplies or services will satisfy agency requirements (FAR 6.302-1). See posted J&A for further information. SOLE SOURCE JUSTIFICATION (Simplified Acquisition Procedures under FAR Part 13 Not Exceeding $150K) 1. Agency/Contracting Activity: MI CC-Ft Polk, LA 2. Description of Action: Nature: D New Requirement ~Follow-On Requirement D Mod to Existing Purchase Order/Contract Number Pricing: ~ Firm-Fixed Price D Time and Materials Funds: ~ OMA D Other Funds: ---- 3. Description of Supplies/Services: a. The total estimated dollar value of the proposed action is - b. Vendor will provide Bayne Jones Army Community Hospital with licensing that will enable the Radiologist and other physicians to use the STATdx Diagnostic clinical decision support tool at the point of care. STATdx supports the busy practicing radiologist by increasing speed, accuracy and diagnostic confidence in complex cases. STATdx streamlines workflow by reducing the time required to research and complete a difficult imaging analysis. STATdx is the largest and most comprehensive XML-based digital reference source exclusively designed for imaging in the world. Some of the features it provides are as follows: 1. Provides interactive evidence-based medicine reference for radiographic diagnosis 2. Provides immediate and concise anatomical and radiographic correlation of pathology 3. Complete differential diagnosis for various radiographic findings 4. Updated references of complicated and rare diseases 5. Online service that can be accessed from any computer The total cost of reflects two (2) seats. Each seat is priced at - 4. Authority: Action using Simplified Acquisition Procedures ~ FAR 13.106-l(b) (1): For purchases not exceeding the simplified acquisition threshold (SAT), contracting officers may solicit from one source if the contracting officer determines that MICC-FPLA-15-08 the circumstances of the contract action deem only one source reasonably available (e.g. urgency, exclusive licensing agreements, brand name, or industrial mobilization). 5. Reason for Authority Cited: This is a license renewal. Radiology at BJACH has utilized AMIRSYS STATdx for the past four years and is linked to the BJACH picture archives and internet system. The OIC, as well as the civilian radiologists who work there, are trained in STATdx. Potentially changing software would negatively impact mission accomplishment. It is our professional opinion that AMIRSYS STATdx is the best first imaging point-of-care, diagnostic clinical decision support system on the market. AMIRSYS STATdx is expert-based and statistically generated with the diagnoses that are ranked Common, Less Common, or Rare but important. The compare feature allows side-byside comparison of up to three diagnoses simultaneously. This streamlines workflow by reducing the time required to research and complete a difficult imaging analysis. 6. Actions to Increase Competition: An email was sent to 41 different vendors for market research purposes on 23 April 2015, asking if they are able to provide this license. Two responses were received; one from Elsevier Clinical Solutions (Amirsys) a large business and Unistar-Sparco Computers, Inc. a small business in the SBAs 8(a) program. 7. Market Research: Market research has shown that STATdx is proprietary software, developed and licensed by Elsevier Clinical Solutions (Amirsys), and that licensing of this software is only available through Elsevier Clinical Solutions (Amirsys). Unistar-Sparco Computers, Inc., an 8(a) firm, initially stated they could provide this requirement. On 07 May 2015, Unistar-Sparco Computers Inc, stated that they would not be able to compete for this requirement as they are not an authorized vendor for this particular software. 8. Procurement History: Previous Purchase Orders(s) or Contract(s): [g} Yes D No Purchase order or contract number:W9124E-14-P-0025 Was action competed? D Yes ~No If action was not competed, state the cited authority, summarize rationale: IA W FAR 13 .106-1 (b )( 1 ), the action was not competed due to the fact that only one source was available to provide this mission-essential software. MICC-FPLA-15-08 9. Interested Sources: No other vendors have expressed interest in this acquisition nor have any unsolicited quotes been received regarding this acquisition. 10. Technical/Requirements Certification: I certify that the supporting data under my cognizance which is included in the abbreviated J&A is accurate and complete to the best of my knowledge and belief. Submitted By: Position Title: OIC Email Address: Signature: 11. Fair and Reasonable Price Determination: As Contracting Officer, I hereby determine that the anticipated cost to the Government for this contract action will be fair and reasonable. Basis for the determination: comparative price analysis techniques. 12. Contracting Officer's Approval: I hereby certify that this Justification is accurate and complete to the best of my knowledge and belief. Based on the foregoing, I approve this sole source justification subject to availability of funds, and provided that the services and supplies herein described have otherwise been authorized for acquisition Magdaleno M. Guzman Contracting Officer US Army Mission and Installation Contracting Command, Ft Polk, LA

Chiller Replacement Project

General Services Administration, Public Buildings Service (PBS) | Published May 21, 2015
cpvs

The General Services Administration (GSA), Great Lakes Region 5, announces an opportunity to provide General Contractor (GC) Services for the Chiller Replacement Project at the E. Ross Adair Federal Building and U.S. Courthouse located at 1300 S. Harrison Street in Fort Wayne, Indiana. The goal of the project includes the replacement of the building's existing chillers, air cooled condensers and associated piping and electrical equipment with new. The building is an active courthouse; all work will be performed while the building is occupied. The scope of work for GC services includes but is not limited to: • Remove and dispose of the existing chillers, roof mounted condensers and associated equipment. • Provide a complete new rotary-screw type water chiller replacement system with roof mounted condensers. • The replacement roof mounted condensers will be located in an alternate roof location from their present location on the west elevation mezzanine roof. This will require a new structural steel platform and removal of the existing platform. • Necessary modification to the building's existing temperature control system. • Commissioning for the new replacement equipment, electrical, piping systems and control modifications. This procurement is a total small business set-aside. Funds are currently available. The North American Industrial Classification Code (NAICS) is 236220 with a size standard of $36.5 million. The total estimated construction cost for the project is between $1,000,000 and $2,000,000. GC Services are anticipated to commence upon award of the contract, with a performance period of 210 calendar days. This is a negotiated procurement; there will NOT be a public bid opening. The GC will be competitively chosen using Source Selection (FAR 15.3) procedures. The objective of the Source Selection Process is to select a proposal that represents the best value to the Government. Evaluation factors for award will consist of Experience, Past Performance and Price. The best value to the Government based on these factors will determine award. The solicitation will be available on or about June 10, 2015. The Government reserves the right to make award on initial offers, but discussions may be held if appropriate. The solicitation cited above can only be obtained by accessing the secure website, FedBizOpps (FBO). FedBizOpps is designed to safeguard sensitive but unclassified (SBU) acquisition information and is fully integrated with other electronic Government initiatives, including the System for Award Management (SAM) (www.sam.gov). Registration in both SAM and FedBizOpps is required in order to download solicitation documents and is used to validate vendor identity. Contractors not registering in these systems will be ineligible to download the solicitation and ineligible for an award. Potential offerors will be responsible for downloading the solicitation and monitoring the website for amendment(s), if any to the solicitation. Offer due date and time for receipt of proposals will be on, or about July 28, 2015 by 2:00 PM (EST). A pre-proposal conference and site-visit will be held on or about June 24, 2015 and notification to the Contracting Officer of proposed attendance will be required. We consider attendance at this conference vital to the preparation of a competitive and cost effective proposal and to understanding the total result desired by the Government. Failure to attend this meeting may not be used as an excuse for omissions and miscalculations in offers. An award is anticipated on or about August 27, 2015. Any questions regarding this notification should be directed to the Contracting Officer, Katie Musselman at katie.musselman@gsa.gov.

67--Contract Award and J & A Posting

Department of the Army, Army Contracting Command, MICC | Published May 28, 2015
cpvs

SOLE SOURCE JUSTIFICATION (Simplified Acquisition Procedures under FAR Part 13 Not Exceeding $150K) 1. Agency/Contracting Activity: Mission and Installation Contracting Command- Fort Polk, LA 2. Description of Action: Nature: New Requirement Follow-On Requirement Mod to Existing Purchase Order/Contract Number Pricing: Firm-Fixed Price Time and Materials Funds: OMA Other Funds:_________ 3. Description of Supplies/Services: a. The total estimated dollar value of the proposed action is b. WatchGuard Body Vista HD Cameras, model VIS-CAM-EXT-002, to be worn by the DES Police Officers of Fort Polk, LA 4. Authority: Action using Simplified Acquisition Procedures fAR 13.106-1(b) (1): For purchases not exceeding the simplified acquisition threshold (SAT), contracting officers may solicit from one source if the contracting officer determines that the circumstances of the contract action deem only one source reasonably available (e.g. urgency, exclusive licensing agreements, brand name, or industrial mobilization.) 5. Reason for Authority Cited: Currently, the systems mounted on the motorcycles and within the automobiles used by the Fort Polk DES Police Force are outfitted with WatchGuard audio and video systems as well as the evidence library software and various other interface systems and back-up hardware. To procure another brand of body camera would require spending over $471K to ensure compatibility existed throughout the entire fleet of DES vehicles. It would be cost prohibitive to the Government to procure another brand of body camera. These cameras are essential to the needs of the Government, especially in providing a clear chain of custody by obtaining audio and video recordings of police and public interactions and other events during normal police operations. 6. Actions to Increase Competition: A sources sought targeting small businesses was posted to FedBizOps on 23 March 2015 to gauge industry interest and capabilities in providing the WatchGuard brand of body cameras. Seven vendors responded to the sources sought. One vendor had a GSA schedule; the other six were capable of providing the brand-name product via open market. MICC-FPLA-15-07 7. Market Research: Other market research involved independent review of the mandatory sources required of FAR Part 8. None were found in the inventories of the requiring activity; no excess was available from other lateral agencies; the Federal Prison Industries, Inc. did not support these items; the items required were not on the Procurement List maintained by the Committee for Purchase From People Who Are Blind or Severely Disabled; were not available through wholesale supply sources in enough quantity to allow for adequate competition among the suppliers of this brand of body camera. Finally, an exhaustive internet search revealed only four potential vendors found. 8. Procurement History: Previous Purchase Orders(s) or Contract(s): Yes No Purchase order or contract number:_______________ Was action competed? Yes No If action was not competed, state the cited authority, summarize rationale:______________________________________________________________________ ______________________________________________________________________________ 9. Interested Sources: No other vendors have expressed interest in this acquisition nor have any unsolicited quotes been received regarding this acquisition. 10. Additional information to support the justification: N/A. 11. Technical/Requirements Certification: I certify that the supporting data under my cognizance which is included in the abbreviated J&A is accurate and complete to the best of my knowledge and belief. Submitted By: Position Title: LE Management Branch Email Address: Signature: 12. Fair and Reasonable Price Determination: As Contracting Officer, I hereby determine that the anticipated cost to the Government for this contract action will be fair and reasonable. Basis for the determination: comparative price analysis techniques. MICC-FPLA-15-07 13. Contracting Officer's Approval: I hereby certify that this Justification is accurate and complete to the best of my knowledge and belief. Based on the foregoing, I approve this sole source justification subject to availability of funds, and provided that the services and supplies herein described have otherwise been authorized for acquisition Magdaleno M. Guzman Contracting Officer US Army Mission and Installation Contracting Command, Ft Polk, LA

C--Indefinite Delivery Contracts for A-E Services, Nation-Wide Small Business

Department of the Army, U.S. Army Corps of Engineers | Published March 3, 2015
cpvs

1. CONTRACT INFORMATION: a. General. This nation-wide A-E Services contract is being procured in accordance with the Brooks Act (Public Law [P.L.] - 92-582) and implemented in the Federal Acquisition Regulation (FAR) Subpart 36. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. This announcement is set-aside for Small Business firms. The contract is anticipated to be awarded on or about April 2015. Solicitation period at minimum will be 30 calendar days from the posting date. It is anticipated that two contracts will be awarded from this announcement for an estimated $35,000,000 for each contract and will have a 1-year base period and four 1-year option periods. A Minimum Guarantee amount of $2,500 will apply to the Base Period only. The contract awarded under this announcement will be administered by the Fort Worth District and the Fort Worth District may elect to transfer capacity to other USACE Districts in support of the Department of Homeland Security, as well as military, civil works, and International and Interagency Support (IIS) Customers. North American Industrial Classification System code is 541330, which has standard size of $15Million. Projects are anticipated to be Nationwide, in support of the Department of Homeland Security and the Fort Worth District, Southwestern Division, U.S. Army Corps of Engineers. However, Task Orders under the resultant IDC may be awarded for projects anywhere in the U.S. or its territories or possessions. b. Contract Award Procedure: To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instruction on registering with the SAM, please see the SAM Web site at https://www.sam.gov/. NO STATE-LEVEL certifications shall be accepted. The Service Contract Act will apply to this acquisition. The proposed services will be obtained by a Negotiated Firm-Fixed Price Contract. c. Nature of Work: The services necessary for each requirement will be negotiated and awarded as individual Task Orders. The A-E shall furnish all services, materials, supplies, and supervision required to fully complete each Task Order. 2. PROJECT INFORMATION: A-E Services are expected for but not limited to facilities and infrastructure engineering, design and construction projects for the agencies under Department of Homeland Security (e.g. Border Patrol Stations, Highway Checkpoints, Detention facilities, administration facilities, Vehicle Maintenance Facilities, Drug Seizure Vault, Communication towers, Forward Operating Bases, roads and lighting, border fence and gates, hangers). A-E Services are expected for primarily engineering and design services to include but not be limited to any or all of the following related services: Program and Project Management; Development of Request for Proposal (RFP) packages; multi-disciplined design support and consultant services; scoping, design, drafting, and planning services for new construction and/or renovation, demolition and alterations of existing facilities; construction programming; construction cost estimating; topographic or boundary surveys; on site construction oversight; various engineering studies and site investigations; facility condition assessments using the BUILDER Sustainment Management System; ASHRAE Level I, II & III Energy Audits; value engineering services; subsurface geotechnical investigation and testing. Environmental studies/surveys and abatement design may also be required. Services also may include, but not be limited to any or all of the following: research analysis; pre-design site-assessment; feasibility and concept studies; interior design; space planning and programming; development of design concepts/standards; value engineering; life cycle cost analysis; and post award shop drawing review. Additional services include but not limited to: construction inspection; preparation of record drawings; soils engineering; preparation of operational maintenance manuals; environmental studies; National Historic Preservation Act analysis and documentation; historic and cultural resource studies - site identification surveys; design review; seismic analysis; design construction cost reconciliation; environmental testing; site evaluation; remediation design; state regulator or EPA compliance for hazardous materials such as petroleum products, automotive chemicals, asbestos, lead, and radon; design security and communications systems; designing fire protection and life safety systems; and other technical services related to project requirements as specified in individual contract Task Orders. Other Studies and Related Services: The A-E shall have knowledge and experience of spatial concepts and state-of-the art Geographic Information System (GIS) and the performance of complex spatial data management and analyses. A-E must be capable of the acquisition, storage, retrieval, analysis, manipulation, dissemination, display and management of geospatial data using a desktop based platform; developing, managing, and manipulating digital data bases; developing and executing customized software applications; developing and executing computer modeling/simulations depicting end-state conditions; preparing maps and graphics; CADD conversion; CADD/GIS interoperability; developing, implementing and maintaining enterprise GIS systems; designing, implementing, and maintaining web pages and portals meeting DoD regulations; Federal Geographic Data Committee (FGDC) metadata standards compliance; SDSFIE (Spatial Data Standard) and AEC (Architectural Engineering CADD Standard) compliance; and on-site geospatial management. Other services included such things as planning services, site selection services, relocation services, document processing, testing services, professional experts at hearings, and photographs. Design considerations may include landscaping, architectural hardware, architectural evaluations, electronic and communications systems, force protection, environmental or EPA regulatory considerations including storm water pollution prevention plans and Section 404 Permit considerations. NEPA compliance includes but not be limited to preparing Environmental Impact Statement (EIS). Project deliverables may include engineering studies, environmental surveys (wetlands/waters of the U.S., asbestos, lead based paint, soil, etc.),soil borings/samples for testing, boring logs, CADD produced plans specifications prepared utilizing Specsintact software (government furnished software) using Unified Facilities Guide Specifications, construction cost estimates prepared utilizing MII (government furnished software)(MII cost estimating software will be provided by the Government with data base information purchased by the A-E), and design analysis. All work must be done by or under the direct supervision of licensed professional engineers or registered architects. The selected small business A-E firms will need to demonstrate capability to perform at least 50 percent of the contract work listed below in accordance with EP 715-1, Chapter 3-8c which can be found at: http://www.publications.usace.army.mil/Portals/76/Publications/EngineerPamphlets/EP_715-1-7.pdf. In particular, in order to be awarded a small business contract the A-E firm will perform at least 50 percent of the cost of the contract incurred from personnel with its own employees. 3. SELECTION CRITERIA: Selection criteria for this acquisition are listed below in descending order of importance (first by major criterion and then by each sub-criterion), Criteria: (a)-(d) are primary criteria; item (e) is the secondary criteria and will only be used as tie-breakers among technically equal firms. (a) Specialized Experience and Technical Competence (Ensure that all special experience requirements are reflected on appropriate personnel resumes at Section E, Part I, SF 330). The contractor must demonstrate expertise in the following: (i) Recent experience (within the past 5 years) and performing work on a wide variety of sites located within the United States, its territories and possessions in a manner that complies with Federal, State, and Local laws and regulations. Demonstrate a minimum of three (3) examples within the past 5 years showing specialized experience and technical competence in the design of Government facilities with over One Million dollars ($1,000,000) construction costs. (ii) Demonstrate the capability to design projects incorporating the latest DoD Force Protection/Anti-Terrorism criteria (including any additional service requirements by the Department of Homeland Security), IBC and UFC codes, and LEED certification criteria. (iii) Demonstrate experience completing facility condition assessments using the BUILDER Sustainment Management System and ASHRAE Level I, II & III Energy Audits. (iv) Demonstrate specialized experience in the design of Department of Homeland Security and Border Patrol facilities or comparable non-government facilities. Specialized experience in the design of Government and DOD facilities will also be considered. (v) Firms must demonstrate experience in evaluating contractor's submittals and performing construction surveillance. (vi) Firms must demonstrate experience in design and survey for abatement of asbestos, lead-based paint, and the handling/disposal of other toxic and regulated substances. A HTRW survey team member must have demonstrated experience in use of a suitable X-ray fluorescence device during on-site surveys for lead-based paint and have access to same. (vii) Firms must demonstrate success in prescribing the use of recovered materials, achieving waste reduction, pollution prevention, energy efficiency and conservation in facility design. (viii) Firms must demonstrate the ability to prepare construction cost estimates using the program MII, latest version. (ix) Firms must demonstrate prior experience in use of Government-furnished Specsintact software in preparing project specifications. (x) Firms must demonstrate the ability to submit drawings in AutoCAD, Revit and Bently Microstation utilizing current versions. (xi) Firms must demonstrate the following expertise: a) using ArcGIS and/or Web services and associated extensions; b) building and maintaining multi-user geo-database in SQL and/or Oracle; c) executing ArcGIS Server Enterprise for Oracle and SQL server; d) developing and implementing geoprocessing scripts suing Python, Java, VB, Secure Socket Laser, VB.NET, C#(2005), Visual Basic, and AML; e) developing, implementing, and maintaining web-pages and web portals; f) CADD conversion and CADD/GIS interoperatability; g) operating map survey-grade GPS unit; h) the ability to provide on-site GIS support; i) Building information modeling (BIM). (b) Professional Qualifications: This Indefinite Delivery Contract will require the A-E Contractor to demonstrate that all expertise requirements are reflected on key personnel resumes in section E, Part I, SF330. None of the required personnel can be dual disciplined (except that the Life Safety Specialist can be one of the required registered Architects if qualified) and the Certified Energy Manager can be one of the Mechanical or Electrical Engineers, i.e. a separate employee must be on the Design Team except as noted for each stated requirement above to meet the personnel required. Ensure that resumes are provided for each of the required Architects, Engineers, and other personnel specifically required. Evaluation of each discipline will consider education, registration, relevant project experience within the last five years, and longevity with the firm. Resumes for the survey crew and testing lab are not required. Resumes for the asbestos/lead-based paint survey personnel are required. Repeat Resume Page as needed to provide all required resumes. Following is a list of the key personnel, minimum requirements and the minimum number required under the acquisition: (i) Two Project Managers; minimum of five years of experience on DoD projects and PMP Certification is highly desired; (ii) Three Registered Architects, one Registered Landscape Architect, one Registered Interior Designer, Three licensed Electrical Engineers, Three licensed Mechanical Engineers, One licensed Geotech Engineer, One Foundation Engineer, One AEE Certified Energy Manager, Three licensed Civil Engineers, Two Environmental Engineers, Two licensed Structural Engineers - with degree from an accredited university engineering program (ABET, NAAB), plus a minimum of 5 years work experience in their field of expertise for all positions listed in this paragraph; (iii) One GIS Analyst, One Geographic Data Processor, One Database Manager, One Web Programmer, One Web Administrator, One System Administrator, One Application Programmer - minimum of five years of experience in related field and certification is highly desired for all positions listed in this paragraph; (iv) One Qualified Fire Protection Engineer (A qualified fire protection engineer is defined as an individual meeting one of the following conditions: 1) An engineer having a Bachelor of Science or Master of Science Degree in Fire Protection Engineering from an accredited university engineering program, plus a minimum of 5 years work experience in fire protection engineering; 2) A licensed Professional Engineer (P.E.) who has passed the fire protection engineering written examination administered by the National Council of Examiners for Engineering and Surveys (NCEES); or 3) A registered professional P.E. in a related engineering discipline with a minimum of 5 years experience, dedicated to fire protection engineering that can be verified with documentation), (v) One Life Safety Specialist, Two certified environmental survey personnel (asbestos, lead-based paint, soil, etc.), Two environmental design personnel (asbestos, lead-based paint, soil, etc.) - minimum of five years of experience in the field of expertise for all positions listed in this paragraph; (vi) One certified Value Engineer, One experienced MII Cost Engineers, One Professional Land Surveyor and survey crew, a geologist or soils engineer; minimum of five years of experience in related field of expertise for all positions listed in this paragraph except the survey crew. (c) Past Performance: Past performance on DoD contracts with respect to compliance with contract and task order terms, quality of work, adherence to schedules, cost control, communication, and issue resolution as determined by ACASS and other sources. (d) Capacity: Firms must demonstrate adequate team capacity to perform three task orders concurrently, at three separate locations, not within the same state; firm's capacity is an important consideration because of the potential for unforeseen schedule changes. The following item (e) is the secondary criteria: (e)Volume of DoD contract awards: In Section H, Part I, SF 330, firms must show their past 12 months DoD contract awards stated in dollars (see details in a subsequent paragraph). Include awards to all branch offices. In your calculation, do not consider awards to overseas offices for projects outside the United States, its territories, and possessions. Do not consider awards to a subsidiary if the subsidiary is not normally subject to management decisions, bookkeeping, and policies of a holding or parent company. 4. SUBMITTAL REQUIREMENT: In an effort to reduce paperwork and cost, ALL SF 330s shall be submitted electronically via the AMRDEC SAFE website at: https://safe.amrdec.army.mil/safe/. At the AMRDEC SAFE website, select the link: For users without a CAC OR if your computer is not configured to read your CAC. Using this option will allow you to access the SAFE as a guest. When completing the information for transmittal at the AMRDEC SAFE website, notification should be submitted to Contract Specialist, Julianne Bowersock, e-mail address: Julianne.L.Bowersock@usace.army.mil. (a) Interested firms (single firms or joint ventures) having the capabilities to perform this work must submit an SF 330 (6/2004 Edition), to the site stated above not later than 2:00 P.M. (Central Time) on the response date indicated above. If the response date is a Saturday, Sunday or Federal Holiday, the deadline is 2:00 P.M. the next business day. Late proposal rules found in FAR 15.208 will be followed for late submittals. Submission by telephonic facsimile will not be accepted. Personal visits to discuss this announcement will not be allowed; (b) Submit a compiled SF 330, Part I from the Prime, completed in accordance with the SF 330 instructions and additional instructions herein. It must contain information in sufficient detail to identify the team (prime, other offices of the prime firm and sub-consultants) proposed for the contract. Do not include company literature with the SF 330; (c) Use no smaller than 10 font type using Standard English. Front and back side use of a single page will count as two (2) pages. Pages in excess of the maximums listed will not be used in evaluation of the selection criteria. SF330, Part I, ADDITIONAL INSTRUCTIONS: (a) In Section C, identify the discipline/service to be supplied by each consultant; (b) In Section D, include a Team Project Organization Chart to indicate how each firm on the proposed team (prime and each sub-contractor is identified in Section C) integrates into the composite team; (c) In Section E, provide brief resumes of the on-staff or sub-consultant employees you intend to use to perform the work. Resumes must be submitted for each employee required to meet the minimums stated above in paragraph 3(b); (d) In Section F, a maximum of 10 projects including the prime and sub-consultants will be reviewed. Use no more than one page per project; (e) In Section G, Block 26, include the firm and location the person is associated with. The names of all individuals included in the resumes in Section E shall be listed in Block G-26 along with their firm location and their roles even if example project experience in Block G-28 is not applicable; (f) In Section H, provide a narrative to address each of the requirements, including subparagraphs, of items listed in Section 3, Selection Criteria, of this synopsis. When addressing team capabilities, clarify planned capability, existing capability and prior experiences, if any. Include any other relevant information including a short discussion of why the firm is especially qualified based upon the specific selection criteria listed in Section 3 herein. Under paragraph 3(e) above, provide an itemized summary of DoD contract awards to include Agency, Contract Number/Task Order No., and Project Title and amount. (Note: award of Indefinite Delivery Contracts should not be counted as award amounts; only actual Task Orders.) Generally, provide a brief presentation of internal controls and procedures that demonstrate the firms overall Design Quality Management Plan (DQMP) which provides sufficient information about this plan that clearly explains the ability of the firm to control costs, schedule and quality of work to be submitted to the Government. (A project-specific detailed quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission). Indicate the estimated percentage involvement of each firm on the proposed team. Do not exceed 20 pages for Block H. SF330, PART II, ADDITIONAL INSTRUCTIONS (a) Responding firms must submit a copy of a current and accurate SF 330, Part II for the specific prime, other offices of the prime and subcontractor offices proposed to perform the work even if one is already on file. All Part IIs MUST be signed (signed within the past 12 months) and dated either by an original handwritten signature or a cut and pasted facsimile of an original signature. Indicate in Block 5b of each Part II if the firm is a Small Business, HUBZone, Service Disabled Veteran-Owned Small Business, or Woman-Owned Small Business. To be classified as a small business, a firm's average annual receipts or sales for the preceding three fiscal years must not exceed $14 million; (b) In Block No. 4, Part II, provide the Data Universal Numbering system (DUNS) number issued by Dun and Bradstreet Information System (1-866-705-5711) for the prime A-E or Joint Venture. The DUNS number must be for the firm or joint venture performing the work (i.e., not the parent company DUNS number, but a DUNS number specifically for the office performing the work. Each branch office and/or joint venture must have their own DUNS number); and (c) Solicitation packages are not provided for A-E contracts and no additional project information will be given to firms during the announcement period. Facsimile transmissions will not be accepted. Points of Contact: Contracting - Ms. Julianne Bowersock OFFERORS QUESTIONS AND COMMENTS (a) Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet. (b) To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into the system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency USACE, enter Key for this solicitation listed below, and your e-mail address, click login. Fill in all required information and click create user. Verify that information on next screen is correct and click to continue. (c) From this page you may view all bidder inquiries or add inquiry. Only one question will be allowed per inquiry. If multiple questions are included in a single inquiry, only the first question will be answered. All others will remain unanswered until entered in as single inquiries. (d) Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team. (e) The Solicitation Number is: W9126G-14-R-0071. (f) The Bidder Inquiry Key is: 64NPS3-655VSN. (g) The Bidder Inquiry System will be closed to new inquiries seven (7) calendar days prior to proposal submission in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. If the System is not closed in a timely manner, an inquiry posted within seven calendar days of the receipt of proposals will still be regarded as untimely and will not be afforded a substantive response. (h) Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. (i) The bidder call center operates weekdays from 8am to 5pm U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 1-800-428-HELP (1-800-428-4357). (j) Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals. This is not a request for proposal. Phone calls to discuss the solicitation are discouraged unless absolutely necessary. Personal visits for the purpose of discussing this solicitation are not allowed. To verify your proposal has been delivered you may e-mail Julianne.L.Bowersock@usace.army.mil.

R-- INDEFINITE DELIVERY ARCHITECT ENGINEER CONTRACT FOR SURVEYING, MAPPING AND RELATED GEOSPATIAL SERVICES, PRIMARILY WITHIN THE SOUTHWESTERN DIVISION (ARKANSAS, LOUISIANA, NEW MEXICO, OKLAHOMA AND TEXAS) AND ON A LIMITED NATIONWIDE BASIS

Department of the Army, U.S. Army Corps of Engineers | Published December 20, 2013  -  Deadline January 21, 2014
cpvs

The Fort Worth District, U.S. Army Corps of Engineers requires the services of Architect-Engineer (A-E) firms for three (3) Indefinite Delivery Contracts (IDCs) for Surveying, Mapping and Related Geospatial Services which are being procured in accordance with PL 92-582 (Brooks Act) and implemented in FAR Part 36. This announcement is a Small Business Set-Aside Only. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. The required services and products will occur primarily within the Southwestern Division area of responsibility including all or portions of Arkansas, Louisiana, New Mexico, Oklahoma, and Texas and on a Limited Nationwide Basis. The North American Industrial Classification System (NAICS) Code applicable to this project is 541370, Engineering Services, which has a size standard of $14,000,000 in average annual receipts. Anticipated award will be on or about July 2014. The IDCs will be administered by the Fort Worth District, U.S. Army Corps of Engineers. Each IDC will have a base period of twelve (12) months plus two (2) twelve (12) month option periods. The IDCs will be for a total period of up to three years for a total estimated amount of $9.9 million (each contract will be for an estimated $1.1 million for the base year and an estimated $1.1 million for each of the two one-year option periods). The Minimum Guarantee amount is $2,500.00 for the base year only. This requirement will be satisfied with three (3) Firm Fixed Price (FFP) small business set-aside IDCs.

59--The Government seeks to award a bridge contract that seamlessly implements the current AIE 2 system configuration known as AIE 2+.

Department of the Army, Army Contracting Command | Published June 12, 2014  -  Deadline July 11, 2014
cpvs

The system shall be flexible to allow future upgrades and integration with other authoritative sources. C.2.3. Information Security and Assurance The Contractor shall ensure the AIE system obtains Defense Information Assurance Certification and Accreditation Process (DIACAP) certification and Department of the Army Net Worthiness Certifications for connection to an Installation's Non-secure Internet Protocol Router Network (NIPRNET). The system shall protect Personally Identifiable Information (PII) IAW the Privacy Act of 1974, DOD Privacy Program, implemented by DoDD 5400.11, DOD 5400.11-R and applicable Federal laws regarding the protection of privacy information. The system shall comply with the DoD Personnel Identity Protection (PIP) Program as implemented by DoDD 1000.25. C.2.4. Testing The Contractor's testing program shall include planning, execution and assessment of system performance against the SCD. The Contractor shall develop and implement test plans and procedures that support verification and validation of system requirements. The Contractor's testing methodologies shall address how future upgrades are tested and validated. C.2.5. Total Package Fielding (TPF) The TPF employs a fielding strategy to support multiple, near-simultaneous deployments and ensures that when a system is transferred to a gaining Installation, the equipment is trainable, supportable and maintainable. The Contractor should refer to Army Regulation 700-142; Type Classification, Material Release, Fielding and Transfer for additional guidance. TPF shall be coordinated with the Installation to ensure fielding does not adversely impact normal activities. C.2.6. Contractor Logistics Support (CLS) The Contractor shall integrate and field a sustainable capability that provides for maintenance, logistics support, test equipment/equipment support, reduced manpower, training support, design interface, technical data, computer resource support, packaging, handling, storage and transportation capabilities. The Contractor shall execute one base year plus one optional year of CLS and Integrated Logistics Support (ILS) planning. C.2.7. Training The Contractor shall provide a strategy to address system training for both Tier 1 and Tier 2. Training includes: new equipment training and system operation instruction for administrators, registrars, operators and maintainers at each gaining Installation. Training curriculum will be presented at least 30 days before training and will be easily adaptable as the system matures. The Contractor shall conduct rehearsal training at the request of the Government. The system training plan will incorporate computer-based instruction to the greatest extent possible and support follow-on refresher and transition training. C.2.8. Quality The Contractor shall establish and maintain a program/quality management system that complies with the standards established by ANSI/ISO/ASQ-9001:2000, Capability Maturity Model Integration (CMMI) Level 3 or higher or other comparable quality management systems that provide equivalent process establishment and control. C.3 Technical Solution The Contractor shall provide an AIE 2+ System that meets all the requirements in the SCD. The system shall at a minimum provide the capabilities listed in Attachment 6. C.3.1. Systems Engineering (SE) C.3.1.1. The Contractor shall provide flexible, responsive and high quality systems engineering and technical support. The Contractor shall conduct systems engineering analysis to ensure the system meets requirements. The Contractor shall manage a repeatable SE process. In accordance with the AIE 2 System Engineering Management Plan, the process shall support at a minimum: design, fielding, logistics, maintenance, system requirements traceability and system upgrades. C.3.1.2. Information Assurance (IA) The Contractor shall provide system-level support in accordance with references cited in the SCD and provisions of DOD Instruction 8510.01, DOD Information Assurance Certification and Accreditation Process (DIACAP), 28 Nov 2007 and Army Regulation 25-1 and 25-2, Army Knowledge Management and Information Technology, 25 June 2013. The system shall provide Common Access Card (CAC) enabled server computers and all workstations except at the guard booth, gatehouse and remote monitoring location. The Contractor shall support the Government Security, Test and Evaluations (ST&Es) for yearly assessments. The Contractor shall provide documents, data, certification tests results and access as required for major changes and recertification. The Contractor shall continuously assess and monitor security policies and procedures to incorporate an Information Assurance Vulnerability Management (IAVM) program, as referenced under Enclosure (6) of DODI O-8530.2, Support to Computer Network Defense, 09 March 2001 and Chairman Joint Chiefs of Staff Instruction, CJCSI 6510.01F, 21 March 2012, IA and Computer Network Defense (CND), current as of 12 August 2008, into the AIE deployment and production environments. The Contractor shall comply with the requirement for Information Assurance Vulnerability Alerts. The Contractor shall continuously maintain, review and assess the status of the system as it relates to the certification and accreditation security posture. C.3.1.2.1. DIACAP Certification Testing and Support. The Contractor shall support the Government with DIACAP certification encompassing both Tier 1 and Tier 2 solutions. In order to support this effort the Government will conduct scans of the system using Army-approved IA product and vulnerability scanners (for example: Defense Information Systems Agency (DISA) Security Readiness Review (SRR) Scripts) prior to installation of the system at the first site. The Contractor should plan to support the following tasks for the stated durations: Certification Test and Evaluation (CT&E) - approximately 2 months ST&E - approximately 1 month DIACAP Package Preparation and Submission - approximately 1 month Authority To Operate (ATO) Decision - approximately 4 months The ATO decision will not require Contractor participation but is included to provide an estimate of the time required. ATO is required to use the system in an operational environment. C.3.1.2.1.1 The AIE System Lab shall be used to support DIACAP certification and accreditation, life-cycle IA measures, testing system modifications, software updates, helpdesk and troubleshooting. The Contractor shall provide an identical operational system, including all hardware, software and network equipment. This includes backup servers and equipment for one Access Control Point (ACP) and two lanes. The system shall be capable of being expanded with equipment for additional lanes and registration stations with minimal reconfiguration. The Contractor shall provide operations, administration and maintenance training to Joint Project Manager Information Systems Software Support Activity (JPM-IS/SSA) personnel. At the conclusion of testing, the hardware, software and network equipment will remain property of the Government. C.3.1.3. System Update and Enhancement The Government may request or the Contractor may propose system updates. As required, the Contractor shall propose a System Update and Implementation Plan (Contract Data Requirements List (CDRL) A001) and an Engineering Change Proposal (CDRL A002). The System Update and Implementation Plan will contain planned activities to ensure the continued viability of the system architecture and allow for the system to incorporate future growth. These areas of future growth may include implementing an expanded enterprise solution and integration with other authoritative sources, biometric systems and/or response systems. C.3.2. Site Survey and Site Design C.3.2.1. Site Survey The Contractor shall perform an initial site-survey of the Installation to include a physical survey of the ACP and entry lanes; collect information on the Installation's network; layout and configuration of the visitor control center and other information to support system design efforts. The Contractor shall deliver a Site Survey Report (CDRL A003) to document their findings. The Contractor shall collect sufficient information to support both Tier 1 and Tier 2 designs. C.3.2.2. Site Designs The Contractor shall provide a detailed Installation design to meet the operational requirements and site conditions as determined by the site survey. The design shall incorporate Installation-specific items; building and utility system diagrams; Installation maps; system integration diagrams and construction permitting requirements. The system design shall include the integration of the system with the Installation's network and any existing entry technologies and capabilities. The system shall use standard communication protocols and communication links of Continental United States (CONUS) Installations. Approximately 10 days after submission of the Installation Engineering Plan (CDRL A004), the Government requires an Initial Design Review (IDR) for each site. The review shall be approximately one day and shall take place at the receiving Installation. During the review the Contractor shall present proposed architectures and equipment models. In addition, the Contractor shall discuss technical issues. At the end of IDR, the government will provide feedback on the Contractor's presentation including suggestions identified by the government review team. A final design package shall be submitted for each Installation and consist of, but not limited to, an executive summary, site description, system description for that Installation, fielding schedule, light construction specifications, Bill of Materials (BOM) and engineering drawings. At the conclusion of the design phase, the Contractor shall document the Installation's design IAW CDRL A004. Additionally, as a part of CDRL A004, the Contractor shall be prepared to address the fielding of the system as either Tier 1 or Tier 2 and be able to break out the equipment required for fielding down to the entry lane level, ACP, registration system(s) and overall installation. Not later than 10 days following receipt of CDRL A004, the Government requires a Final Design Review (FDR). The FDR shall be approximately one day at the receiving Installation. During the FDR, the Contractor shall present its selected architecture and equipment models. Upon satisfactory completion of any outstanding FDR issues, the Government will concur with the final design. C.3.3. Fielding The Contractor shall provide a fully functioning system at each Installation as defined in the approved Installation Engineering Plan. The Contractor shall execute all aspects of installation to include: site preparation, installation of equipment and integration with existing infrastructure. Upon completion of the equipment and system install, the Contractor shall provide a Technical Data Package (TDP) (CDRL A005) to document the complete system. C.3.4. Test and Evaluation C.3.4.1. General The Contractor shall perform the tests described in the following paragraphs. The Contractor shall provide personnel, equipment, instrumentation and supplies necessary to perform or support all testing activities. C.3.4.2. Contractor System Performance Verification (SPV) C.3.4.2.1. The SPV shall include a Performance Verification Test (PVT) and 30 day Endurance Test (ET) conducted at all sites. SPV shall be conducted on a fully integrated system, either Tier 1 or Tier 2. The Contractor shall prepare an AIE 2+ System Test Plan (CDRL A006) and Test Procedures (CDRL A007) to verify all requirements defined in the AIE 2+ SCD. The test report shall be submitted IAW Test Inspection Report (CDRL A008). The Contractor shall conduct SPV IAW approved test plans and procedures to verify that system performance complies with the SCD. In the event of system failure, the Contractor shall conduct an analysis of the failure and prepare a Failure Analysis and Corrective Action Report (FACAR) (CDRL A009). The Contractor shall obtain Government approval prior to closing any FACAR. All FACARs generated during PVT requiring corrective action shall be implemented prior to starting ET. C.3.4.2.3. The Government may terminate testing at any time when the system fails to perform as specified in the contract. Upon termination of testing, the Contractor shall commence an assessment period to identify all failures, determine the causes of all failures, correct all failures and deliver to the Government a Test/Inspection Report (CDRL A008). C.3.4.3. Test Readiness Review (TRR) C.3.4.3.1. Prior to any test, the Government will conduct a TRR at all gaining Installations. The Contractor shall provide to the Government, in writing, an integrated system installation and checkout test report under CDRL A008 and a letter of test readiness that the installed system is ready for testing. C.3.4.3.2. The Contractor shall attend test meetings, prepare minutes, provide required documentation and assist in the resolution of issues or concerns. C.3.4.3.3. Discrepancies in the documentation, design or training shall be corrected prior to the conduct of all test events by the Contractor Site Manager and may involve re-test and re-training of personnel at Contractor's expense. C.3.4.4. Testing for Changes in System Configuration C.3.4.4.1. As the system configuration changes, in response to system growth or changes in capabilities, the Government may perform or direct the Contractor to perform additional testing. C.3.5. Supportability C.3.5.1. ILS Under each Installation Delivery Order (DO), the Contractor shall provide one-year CLS. Army Regulation 700-127 Integrated Logistics Support defines the elements which collectively comprise CLS. CLS includes all warranty, licenses, scheduled and unscheduled field level maintenance, sustainment level maintenance tasks, above basic operator maintenance tasks and supply support. Prior to warranty expiration, the Government will assess the viability of using either Government furnished centralized sustainment or CLS support. If the determination is made to acquire one additional year of CLS, the Government will bilaterally execute a one-year DO. The Contractor shall deliver Maintenance Service Reports (CDRL A010). C.3.5.1.1. Data Collection The Contractor shall collect system performance data and Reliability, Availability and Maintainability data throughout the Warranty and Maintenance period to verify system performance requirements. Data collection shall be IAW Logistics Management Information Data Products (CDRL A011). C.3.5.1.2. System configuration is managed by the Government. The Contractor shall maintain updates (including but not limited to software patches) of AIE 2+ hardware and software following acceptance of the system by the Government for each Installation under CLS. Configuration control shall include a list of all AIE 2+ components and software applications identified in the baseline configuration, as well as tracking of all parts. The Contractor shall deliver all software and firmware support tools, utilities and associated documentation necessary to maintain and upgrade the software as specified in System Description and Architecture (CDRL A012). C.3.5.2. Configuration Management (CM) The Government will manage and chair the AIE Configuration Control Board (CCB) throughout its lifecycle. The Contractor shall participate in and support the CCB and conduct configuration control activities. As part of the CM process, the Contractor shall provide field change documentation and ensure each Change Request (CR) is complete. The CR should include impact and independent analysis for submission to the CCB. The Contractor shall coordinate with the assigned Government Point of Contact (POC) who will monitor and track CRs to closure. C.3.5.2.1. CM Requirements The Contractor shall comply with the Government CM requirements for all equipment, hardware and system software. The Government is the Configuration Manager/Decision Authority. There is no specific Government CM system with which the Contractor needs to interface. The Contractor shall use their tools for CM. C.3.5.2.2 Physical Configuration Audit (PCA) The Contractor shall conduct a PCA witnessed by the Government. The PCA follows correction of all failures experienced during SPV. The PCA shall validate proper execution of CDRL A004 and confirm all items have been base-lined. A Configuration Audit Summary Report (CDRL A013) shall be provided to the Government IAW the previously provided Physical Configuration Audit Plan. C.3.5.3. Technical Manuals (TM) The TM shall be delivered IAW System TM (CDRL A014). C.3.5.3.1 TM Specifications. Page Based TM Requirements Matrix for CL-11-6625-135-13&P Operator and Field Maintenance Manual (Including Repair Parts and Special Tools List) for AIE 2+ Installations are included in CDRL A015. C.3.5.3.2 Requirements for TM. The Contractor shall develop the following TM: CL-11-6625-135-13&P Operator and Field Maintenance Manual (Including Repair Parts and Special Tools List) for Automated Installation Entry (AIE) Increment 2 Installations. Prior to the TM start-of-work meeting, the Government will obtain the TM number from the Communications-Electronics Life Cycle Management Command (C-E LCMC LRC), which will also be the TM publisher. C.3.5.3.3 Meetings. The TM start-of-work meeting shall take place at a predetermined location. The Contractor shall be prepared to discuss all TM requirements in CDRL A014 and this section. C.3.5.4. In-process reviews of TM development shall take place at the Contractor's facility when approximately 30 percent and 70 percent of the TM development is complete. C.3.5.3.4 Incorporation of Approved Changes and Comments. The Contractor shall incorporate all Government-approved equipment changes into the draft TM up to delivery of the final equipment under this contract. All publication comments received by the Contractor from the Government will be forwarded to the TM publisher for disposition. Approved comments shall be included in the final delivery of the TM. C.3.5.3.5 Validation and Verification (V&V). When 100 percent of the TM development is complete, a combined V&V will be conducted prior to Government acceptance of the first AIE 2+ site. The Government will witness the Contractor validation that all operation and maintenance procedures in the TM are correct. A 100 percent desk review of those portions of the TM not subject to hands-on performance will also be conducted. C.3.5.3.6 Delivery, Style and Format The Contractor shall deliver digital files for all TM versions prepared under this contract, including In-Process Reviews (IPR). All draft TM deliveries shall have the words quote mark DRAFT-NOT FOR IMPLEMENTATION quote mark printed across the top of every page. The TM shall be approximately formatted for a vertical (portrait) finished trim size of 8-1/2 inches by 11 inches. The TM font style, size and spacing shall be IAW best commercial practices for technical publications. All fonts in both the delivered Microsoft Word and Adobe Acrobat PDF files must be embedded. Line drawing illustrations shall be used to support operational and maintenance procedures. The Contractor shall prepare a separate figure for each breakdown of a repairable assembly. Existing Government owned or commercial illustrations may be used if they meet the requirements of MIL-PRF-32216. Up to three sheets may be used if appropriate for each multi-sheet figure. The Contractor shall provide to the receiving Installation two paper copies of the TM and one CD-ROM with Adobe Acrobat PDF files. C.3.5.4. Transition Plan The Contractor shall develop a Sustainment Transition Plan (CDRL A015) for transition from CLS to centralized sustainment for each Installation using the previously provided AIE 2 Sustainment Transition Instructions as a guide. The initial Transition Plan is due no later than 90 days prior to the scheduled transition date. The final Transition Plan is due 60 days prior to the scheduled transition date. C.3.6. Training A separate Training Conduct Support Document Package (CDRL A016) shall be prepared for administrator, registrar, operator and maintainer student groups for each new equipment, system operation, follow-on refresher and transition training event. The Contractor shall provide specific training on a per course basis. The ratio of student to trainer shall be 5 students to 1 trainer (5:1) for the Administrator, Maintenance and Registrar and up to 20:1 for the Operator course. C.3.7. Quality Requirements The approved Quality Control (QC) Management Plan is a measuring tool for work performed under this contract. C.3.8. Risk Management Plan The Contractor shall utilize the previously provided AIE 2 Risk Management Plan. Risk events shall be identified and mitigated at all organizational levels. Risk data shall be collected, evaluated and appropriate mitigation strategies identified. All risk items shall be reported to the Government upon identification. C.3.9. Program Management C.3.9.1. Program Management Plan. The Contractor shall develop and implement a (Contractor's) Management Plan (CDRL A017) for the overall management and execution of the contract. The Contractor shall provide a Program Management structure that identifies the level, type and experience of key personnel: Program Manager, Deputy Program Manager, Contract Manager, Fielding Manager, System Engineering Manager and Logistics Manager. The Contractor shall develop and maintain an Integrated Master Schedule (CDRL A018) and immediately report any schedule deviations to the Government. C.3.9.2. Monthly Status Report The Contractor shall provide a monthly status report to the Government. The report will be structured to provide the Government with an up-to-date status of the Contractor's technical, operational, financial and programmatic progress. This report shall be IAW the Contractor's Progress, Status and Management Status Report (CDRL A019). The Contractor shall provide a QC monthly report as part of CDRL A019. C.3.9.3. Data Repository The Contractor shall utilize the Government's SharePoint portal as directed by the Government. C.3.10. Meetings and Briefings The Contractor shall conduct meetings to manage all program aspects to include planning, programming, controlling, executing and managing risk. These meetings will include Start of Work, Technical Interchange Meetings, Integrated Process Teams, Monthly Program Management Reviews and other meetings as directed by the Government. The Contractor shall be responsible for recording, producing and distributing all meeting and briefing minutes, Conference Minutes (CDRL A020). The Contractor shall create, review and provide technical briefings, graphics support and/or other presentations. C.3.11. Notional Fielding Schedule The Notional Fielding Schedule provides a list of probable Installations, a description of Installation size and a notional schedule for fielding. Schedule variances may occur throughout the life of the contract. Each Installation has an associated number of ACPs and lanes that may be subject to change. Final number of ACPs and lanes information will be provided with the request for proposal for each Installation DO. Validation of these numbers will occur during Site Survey. C.3.12. Deliverables The Contractor shall prepare and deliver all deliverables as required. Any additional deliverables shall be further identified and delineated on individual DOs or contract modifications. C.3.13. Security C.3.13.1. Clearances The Contractor shall provide personnel with the appropriate clearance levels to fulfill requirements set forth in each individual DO without impact to schedule, cost or quality levels. It is anticipated that most of the effort on this contract will be UNCLASSIFIED/For Official Use Only (FOUO). All Contractor personnel shall be required to access, view, possess, process and/or use information designated as (FOUO). In addition, certain Contractor personnel must possess and maintain a SECRET security clearance and/or be eligible for immediate adjudication by the appropriate cognizant security authority upon award of the contract. Future requirements for SECRET-eligible personnel shall be established by individual DOs. The DOs requiring such access will be awarded or modified in accordance with a revised DD Form 254 allowing appropriate access and outlining the specific security requirements. The responsible Contracting Officer (KO) or written designee shall apprise the Contractor of any increased security requirements. The Contractor shall submit completed clearance packages within ten (10) calendar days of identification of any increased security requirements. C.3.13.2. DOD CAC Those Contractor personnel requiring recurring logical access may (at the discretion of the Government) be issued a CAC by the Government. The Contractor shall furnish all requested information required to facilitate CAC use and possession. The Contractor's Program Manager shall be responsible for ensuring that all identification badges issued to Contractor employees are returned immediately following the completion of the contract, relocation or termination of an employee and/or upon request of the KO or the Contracting Officer's Representative (COR). C.3.13.3. Access to SECRET Data The Contractor's access to SECRET data will be IAW the requirement set forth in the National Industrial Security Program Operating Manual (NISPOM) (DOD 5220.22M). The Contractor shall ensure that all classified material is handled in accordance with the NISPOM and the appropriate Security/Program Guides/Directives. The Contractor shall obtain appropriate security clearances for required personnel and provide security orientation briefings as directed by the Government. C.3.13.4. Outside Continental United States (OCONUS) In the event that OCONUS travel becomes necessary the Contractor shall ensure that any and all employees subsequently scheduled to support OCONUS shall have the prerequisite passports, visas, inoculations (if required) and clearances in adequate time prior to the trip with no impact to schedule. However, unique costs attributable solely to specific travel locations may be presented at the DO level for consideration. C.3.14. Contract Support Information C.3.14.1. Government-Furnished Equipment (GFE) The Contractor shall take receipt of all GFE and shall be responsible for fielding and maintaining all GFE as a part of the total design solution set, throughout the logistics support period. The Contractor shall closely coordinate their supply and delivery schedules with the Government to ensure all hardware and software are available to meet schedule requirements. The Contractor shall coordinate procurement of items identified as available from Government sources. First priority will be given to DOD mandatory sources, DOD required sources, and other Government available sources. Procurement of equipment on behalf of the Government will be in compliance with all applicable regulations and policies. C.3.14.2. Health and Safety The Contractor shall update and maintain the programmatic Environmental Compliance (EC), Health and Safety (HS) program compliance and 29 Code of Federal Regulations (CFR) 1926 Occupational Safety and Health Administration (OSHA) compliance. C.3.15. Contractor Proposal The Contractor's proposal represents the Contractor's best approach at the time of solicitation.

C--Indefinite Delivery Contract for A-E Services, Nation-Wide Small Business

Department of the Army, U.S. Army Corps of Engineers | Published February 12, 2015  -  Deadline July 23, 2014
cpvs

1. CONTRACT INFORMATION: a. General. This nation-wide A-E Services contract is being procured in accordance with the Brooks Act (Public Law [P.L.] - 92-582) and implemented in the Federal Acquisition Regulation (FAR) Subpart 36. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. This announcement is set-aside for Small Business firms. The contract is anticipated to be awarded on or about April 2015. Solicitation period at minimum will be 30 calendar days from the posting date. It is anticipated that two contracts will be awarded from this announcement for an estimated $35,000,000 for each contract and will have a 1-year base period and four 1-year option periods. A Minimum Guarantee amount of $2,500 will apply to the Base Period only. The contract awarded under this announcement will be administered by the Fort Worth District and the Fort Worth District may elect to transfer capacity to other USACE Districts in support of the Department of Homeland Security, as well as military, civil works, and International and Interagency Support (IIS) Customers. North American Industrial Classification System code is 541330, which has standard size of $15Million. Projects are anticipated to be Nationwide, in support of the Department of Homeland Security and the Fort Worth District, Southwestern Division, U.S. Army Corps of Engineers. However, Task Orders under the resultant IDC may be awarded for projects anywhere in the U.S. or its territories or possessions. b. Contract Award Procedure: To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instruction on registering with the SAM, please see the SAM Web site at https://www.sam.gov/. NO STATE-LEVEL certifications shall be accepted. The Service Contract Act will apply to this acquisition. The proposed services will be obtained by a Negotiated Firm-Fixed Price Contract. c. Nature of Work: The services necessary for each requirement will be negotiated and awarded as individual Task Orders. The A-E shall furnish all services, materials, supplies, and supervision required to fully complete each Task Order. 2. PROJECT INFORMATION: A-E Services are expected for but not limited to facilities and infrastructure engineering, design and construction projects for the agencies under Department of Homeland Security (e.g. Border Patrol Stations, Highway Checkpoints, Detention facilities, administration facilities, Vehicle Maintenance Facilities, Drug Seizure Vault, Communication towers, Forward Operating Bases, roads and lighting, border fence and gates, hangers). A-E Services are expected for primarily engineering and design services to include but not be limited to any or all of the following related services: Program and Project Management; Development of Request for Proposal (RFP) packages; multi-disciplined design support and consultant services; scoping, design, drafting, and planning services for new construction and/or renovation, demolition and alterations of existing facilities; construction programming; construction cost estimating; topographic or boundary surveys; on site construction oversight; various engineering studies and site investigations; facility condition assessments using the BUILDER Sustainment Management System; ASHRAE Level I, II & III Energy Audits; value engineering services; subsurface geotechnical investigation and testing. Environmental studies/surveys and abatement design may also be required. Services also may include, but not be limited to any or all of the following: research analysis; pre-design site-assessment; feasibility and concept studies; interior design; space planning and programming; development of design concepts/standards; value engineering; life cycle cost analysis; and post award shop drawing review. Additional services include but not limited to: construction inspection; preparation of record drawings; soils engineering; preparation of operational maintenance manuals; environmental studies; National Historic Preservation Act analysis and documentation; historic and cultural resource studies - site identification surveys; design review; seismic analysis; design construction cost reconciliation; environmental testing; site evaluation; remediation design; state regulator or EPA compliance for hazardous materials such as petroleum products, automotive chemicals, asbestos, lead, and radon; design security and communications systems; designing fire protection and life safety systems; and other technical services related to project requirements as specified in individual contract Task Orders. Other Studies and Related Services: The A-E shall have knowledge and experience of spatial concepts and state-of-the art Geographic Information System (GIS) and the performance of complex spatial data management and analyses. A-E must be capable of the acquisition, storage, retrieval, analysis, manipulation, dissemination, display and management of geospatial data using a desktop based platform; developing, managing, and manipulating digital data bases; developing and executing customized software applications; developing and executing computer modeling/simulations depicting end-state conditions; preparing maps and graphics; CADD conversion; CADD/GIS interoperability; developing, implementing and maintaining enterprise GIS systems; designing, implementing, and maintaining web pages and portals meeting DoD regulations; Federal Geographic Data Committee (FGDC) metadata standards compliance; SDSFIE (Spatial Data Standard) and AEC (Architectural Engineering CADD Standard) compliance; and on-site geospatial management. Other services included such things as planning services, site selection services, relocation services, document processing, testing services, professional experts at hearings, and photographs. Design considerations may include landscaping, architectural hardware, architectural evaluations, electronic and communications systems, force protection, environmental or EPA regulatory considerations including storm water pollution prevention plans and Section 404 Permit considerations. NEPA compliance includes but not be limited to preparing Environmental Impact Statement (EIS). Project deliverables may include engineering studies, environmental surveys (wetlands/waters of the U.S., asbestos, lead based paint, soil, etc.),soil borings/samples for testing, boring logs, CADD produced plans specifications prepared utilizing Specsintact software (government furnished software) using Unified Facilities Guide Specifications, construction cost estimates prepared utilizing MII (government furnished software)(MII cost estimating software will be provided by the Government with data base information purchased by the A-E), and design analysis. All work must be done by or under the direct supervision of licensed professional engineers or registered architects. The selected small business A-E firms will need to demonstrate capability to perform at least 50 percent of the contract work listed below in accordance with EP 715-1, Chapter 3-8c which can be found at: http://www.publications.usace.army.mil/Portals/76/Publications/EngineerPamphlets/EP_715-1-7.pdf. In particular, in order to be awarded a small business contract the A-E firm will perform at least 50 percent of the cost of the contract incurred from personnel with its own employees. 3. SELECTION CRITERIA: Selection criteria for this acquisition are listed below in descending order of importance (first by major criterion and then by each sub-criterion), Criteria: (a)-(d) are primary criteria; item (e) is the secondary criteria and will only be used as tie-breakers among technically equal firms. (a) Specialized Experience and Technical Competence (Ensure that all special experience requirements are reflected on appropriate personnel resumes at Section E, Part I, SF 330). The contractor must demonstrate expertise in the following: (i) Recent experience (within the past 5 years) and performing work on a wide variety of sites located within the United States, its territories and possessions in a manner that complies with Federal, State, and Local laws and regulations. Demonstrate a minimum of three (3) examples within the past 5 years showing specialized experience and technical competence in the design of Government facilities with over One Million dollars ($1,000,000) construction costs. (ii) Demonstrate the capability to design projects incorporating the latest DoD Force Protection/Anti-Terrorism criteria (including any additional service requirements by the Department of Homeland Security), IBC and UFC codes, and LEED certification criteria. (iii) Demonstrate experience completing facility condition assessments using the BUILDER Sustainment Management System and ASHRAE Level I, II & III Energy Audits. (iv) Demonstrate specialized experience in the design of Department of Homeland Security and Border Patrol facilities or comparable non-government facilities. Specialized experience in the design of Government and DOD facilities will also be considered. (v) Firms must demonstrate experience in evaluating contractor's submittals and performing construction surveillance. (vi) Firms must demonstrate experience in design and survey for abatement of asbestos, lead-based paint, and the handling/disposal of other toxic and regulated substances. A HTRW survey team member must have demonstrated experience in use of a suitable X-ray fluorescence device during on-site surveys for lead-based paint and have access to same. (vii) Firms must demonstrate success in prescribing the use of recovered materials, achieving waste reduction, pollution prevention, energy efficiency and conservation in facility design. (viii) Firms must demonstrate the ability to prepare construction cost estimates using the program MII, latest version. (ix) Firms must demonstrate prior experience in use of Government-furnished Specsintact software in preparing project specifications. (x) Firms must demonstrate the ability to submit drawings in AutoCAD, Revit and Bently Microstation utilizing current versions. (xi) Firms must demonstrate the following expertise: a) using ArcGIS and/or Web services and associated extensions; b) building and maintaining multi-user geo-database in SQL and/or Oracle; c) executing ArcGIS Server Enterprise for Oracle and SQL server; d) developing and implementing geoprocessing scripts suing Python, Java, VB, Secure Socket Laser, VB.NET, C#(2005), Visual Basic, and AML; e) developing, implementing, and maintaining web-pages and web portals; f) CADD conversion and CADD/GIS interoperatability; g) operating map survey-grade GPS unit; h) the ability to provide on-site GIS support; i) Building information modeling (BIM). (b) Professional Qualifications: This Indefinite Delivery Contract will require the A-E Contractor to demonstrate that all expertise requirements are reflected on key personnel resumes in section E, Part I, SF330. None of the required personnel can be dual disciplined (except that the Life Safety Specialist can be one of the required registered Architects if qualified) and the Certified Energy Manager can be one of the Mechanical or Electrical Engineers, i.e. a separate employee must be on the Design Team except as noted for each stated requirement above to meet the personnel required. Ensure that resumes are provided for each of the required Architects, Engineers, and other personnel specifically required. Evaluation of each discipline will consider education, registration, relevant project experience within the last five years, and longevity with the firm. Resumes for the survey crew and testing lab are not required. Resumes for the asbestos/lead-based paint survey personnel are required. Repeat Resume Page as needed to provide all required resumes. Following is a list of the key personnel, minimum requirements and the minimum number required under the acquisition: (i) Two Project Managers; minimum of five years of experience on DoD projects and PMP Certification is highly desired; (ii) Three Registered Architects, one Registered Landscape Architect, one Registered Interior Designer, Three licensed Electrical Engineers, Three licensed Mechanical Engineers, One licensed Geotech Engineer, One Foundation Engineer, One AEE Certified Energy Manager, Three licensed Civil Engineers, Two Environmental Engineers, Two licensed Structural Engineers - with degree from an accredited university engineering program (ABET, NAAB), plus a minimum of 5 years work experience in their field of expertise for all positions listed in this paragraph; (iii) One GIS Analyst, One Geographic Data Processor, One Database Manager, One Web Programmer, One Web Administrator, One System Administrator, One Application Programmer - minimum of five years of experience in related field and certification is highly desired for all positions listed in this paragraph; (iv) One Qualified Fire Protection Engineer (A qualified fire protection engineer is defined as an individual meeting one of the following conditions: 1) An engineer having a Bachelor of Science or Master of Science Degree in Fire Protection Engineering from an accredited university engineering program, plus a minimum of 5 years work experience in fire protection engineering; 2) A licensed Professional Engineer (P.E.) who has passed the fire protection engineering written examination administered by the National Council of Examiners for Engineering and Surveys (NCEES); or 3) A registered professional P.E. in a related engineering discipline with a minimum of 5 years experience, dedicated to fire protection engineering that can be verified with documentation), (v) One Life Safety Specialist, Two certified environmental survey personnel (asbestos, lead-based paint, soil, etc.), Two environmental design personnel (asbestos, lead-based paint, soil, etc.) - minimum of five years of experience in the field of expertise for all positions listed in this paragraph; (vi) One certified Value Engineer, One experienced MII Cost Engineers, One Professional Land Surveyor and survey crew, a geologist or soils engineer; minimum of five years of experience in related field of expertise for all positions listed in this paragraph except the survey crew. (c) Past Performance: Past performance on DoD contracts with respect to compliance with contract and task order terms, quality of work, adherence to schedules, cost control, communication, and issue resolution as determined by ACASS and other sources. (d) Capacity: Firms must demonstrate adequate team capacity to perform three task orders concurrently, at three separate locations, not within the same state; firm's capacity is an important consideration because of the potential for unforeseen schedule changes. The following item (e) is the secondary criteria: (e)Volume of DoD contract awards: In Section H, Part I, SF 330, firms must show their past 12 months DoD contract awards stated in dollars (see details in a subsequent paragraph). Include awards to all branch offices. In your calculation, do not consider awards to overseas offices for projects outside the United States, its territories, and possessions. Do not consider awards to a subsidiary if the subsidiary is not normally subject to management decisions, bookkeeping, and policies of a holding or parent company. 4. SUBMITTAL REQUIREMENT: In an effort to reduce paperwork and cost, ALL SF 330s shall be submitted electronically via the AMRDEC SAFE website at: https://safe.amrdec.army.mil/safe/. At the AMRDEC SAFE website, select the link: For users without a CAC OR if your computer is not configured to read your CAC. Using this option will allow you to access the SAFE as a guest. When completing the information for transmittal at the AMRDEC SAFE website, notification should be submitted to Contract Specialist, Julianne Bowersock, e-mail address: Julianne.L.Bowersock@usace.army.mil. (a) Interested firms (single firms or joint ventures) having the capabilities to perform this work must submit an SF 330 (6/2004 Edition), to the site stated above not later than 2:00 P.M. (Central Time) on the response date indicated above. If the response date is a Saturday, Sunday or Federal Holiday, the deadline is 2:00 P.M. the next business day. Late proposal rules found in FAR 15.208 will be followed for late submittals. Submission by telephonic facsimile will not be accepted. Personal visits to discuss this announcement will not be allowed; (b) Submit a compiled SF 330, Part I from the Prime, completed in accordance with the SF 330 instructions and additional instructions herein. It must contain information in sufficient detail to identify the team (prime, other offices of the prime firm and sub-consultants) proposed for the contract. Do not include company literature with the SF 330; (c) Use no smaller than 10 font type using Standard English. Front and back side use of a single page will count as two (2) pages. Pages in excess of the maximums listed will not be used in evaluation of the selection criteria. SF330, Part I, ADDITIONAL INSTRUCTIONS: (a) In Section C, identify the discipline/service to be supplied by each consultant; (b) In Section D, include a Team Project Organization Chart to indicate how each firm on the proposed team (prime and each sub-contractor is identified in Section C) integrates into the composite team; (c) In Section E, provide brief resumes of the on-staff or sub-consultant employees you intend to use to perform the work. Resumes must be submitted for each employee required to meet the minimums stated above in paragraph 3(b); (d) In Section F, a maximum of 10 projects including the prime and sub-consultants will be reviewed. Use no more than one page per project; (e) In Section G, Block 26, include the firm and location the person is associated with. The names of all individuals included in the resumes in Section E shall be listed in Block G-26 along with their firm location and their roles even if example project experience in Block G-28 is not applicable; (f) In Section H, provide a narrative to address each of the requirements, including subparagraphs, of items listed in Section 3, Selection Criteria, of this synopsis. When addressing team capabilities, clarify planned capability, existing capability and prior experiences, if any. Include any other relevant information including a short discussion of why the firm is especially qualified based upon the specific selection criteria listed in Section 3 herein. Under paragraph 3(e) above, provide an itemized summary of DoD contract awards to include Agency, Contract Number/Task Order No., and Project Title and amount. (Note: award of Indefinite Delivery Contracts should not be counted as award amounts; only actual Task Orders.) Generally, provide a brief presentation of internal controls and procedures that demonstrate the firms overall Design Quality Management Plan (DQMP) which provides sufficient information about this plan that clearly explains the ability of the firm to control costs, schedule and quality of work to be submitted to the Government. (A project-specific detailed quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission). Indicate the estimated percentage involvement of each firm on the proposed team. Do not exceed 20 pages for Block H. SF330, PART II, ADDITIONAL INSTRUCTIONS (a) Responding firms must submit a copy of a current and accurate SF 330, Part II for the specific prime, other offices of the prime and subcontractor offices proposed to perform the work even if one is already on file. All Part IIs MUST be signed (signed within the past 12 months) and dated either by an original handwritten signature or a cut and pasted facsimile of an original signature. Indicate in Block 5b of each Part II if the firm is a Small Business, HUBZone, Service Disabled Veteran-Owned Small Business, or Woman-Owned Small Business. To be classified as a small business, a firm's average annual receipts or sales for the preceding three fiscal years must not exceed $14 million; (b) In Block No. 4, Part II, provide the Data Universal Numbering system (DUNS) number issued by Dun and Bradstreet Information System (1-866-705-5711) for the prime A-E or Joint Venture. The DUNS number must be for the firm or joint venture performing the work (i.e., not the parent company DUNS number, but a DUNS number specifically for the office performing the work. Each branch office and/or joint venture must have their own DUNS number); and (c) Solicitation packages are not provided for A-E contracts and no additional project information will be given to firms during the announcement period. Facsimile transmissions will not be accepted. Points of Contact: Contracting - Ms. Julianne Bowersock OFFERORS QUESTIONS AND COMMENTS (a) Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet. (b) To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into the system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency USACE, enter Key for this solicitation listed below, and your e-mail address, click login. Fill in all required information and click create user. Verify that information on next screen is correct and click to continue. (c) From this page you may view all bidder inquiries or add inquiry. Only one question will be allowed per inquiry. If multiple questions are included in a single inquiry, only the first question will be answered. All others will remain unanswered until entered in as single inquiries. (d) Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team. (e) The Solicitation Number is: W9126G-14-R-0071. (f) The Bidder Inquiry Key is: 64NPS3-655VSN. (g) The Bidder Inquiry System will be closed to new inquiries seven (7) calendar days prior to proposal submission in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. If the System is not closed in a timely manner, an inquiry posted within seven calendar days of the receipt of proposals will still be regarded as untimely and will not be afforded a substantive response. (h) Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. (i) The bidder call center operates weekdays from 8am to 5pm U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 1-800-428-HELP (1-800-428-4357). (j) Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals. This is not a request for proposal. Phone calls to discuss the solicitation are discouraged unless absolutely necessary. Personal visits for the purpose of discussing this solicitation are not allowed. To verify your proposal has been delivered you may e-mail Julianne.L.Bowersock@usace.army.mil.

S--Post-Wide Custodial Services at Ft Myer, VA

Department of the Army, Army Contracting Command, MICC | Published June 24, 2014  -  Deadline July 24, 2014
cpvs

PROJECT TITLE: Post-Wide Custodial Services at Ft Myer, VA Solicitation Number: W91QV1-14-B-0004 - SEALED BID The Mission Installation and Contracting Command (MICC), 9410 Jackson Loop, Ft Belvoir, VA 22060, plans to issue a Solicitation for Post-Wide Custodial Services at Ft Myer, VA. REQUIREMENT SCOPE: The Contractor shall provide all personnel, equipment, tools, material, supervision, and other items and services necessary to perform post-wide custodial work on Ft Myer, VA. This includes, but it not limited to, sweeping, mopping, removal of trash, cleaning of restrooms, dusting, cleaning stairs and landings and any other areas as specified in the PWS. The applicable North American Industrial Classification Code (NAICS Code) is 561720. The Period of Performance (POP) will cover the Base Year Plus Three (3) One-Year Options. There will be a site visit scheduled at a later date. This action is a 100% competitive 8(a) set aside. Point of Contact is Nekia Williams (Contractor), 9410 Jackson Loop, Bldg 1425, Ft Belvoir, VA 22060 or nekia.l.williams.ctr@mail.mil Bid opening is set for on or about 25 August 2014 at 1400 hours local time. The solicitation notices and any/all amendments will be posted and available for viewing and downloading at Army Single Face to Industry (ASFI) Website https://acquisition .army.mil/asfi/ at no charge. No paper copies will be issued. When the solicitation is posted, it is incumbent upon the interested parties to review the aforementioned site regularly for any updates/amendments to this requirement. All prospective bidders must have a Commercial and Government Entity Code (CAGE CODE) and be registered in the System for Award Managment (SAM) at www.sam.gov. Tentative date for issuance of the Solicitation is on or about 24 July 2014. POC: Nekia Williams (Contractor) nekia.l.williams.ctr@mail.mil

S--Post-Wide Custodial Services at Ft Belvoir, VA

Department of the Army, Army Contracting Command, MICC | Published July 1, 2014  -  Deadline August 1, 2014
cpvs

PROJECT TITLE: Post-wide Custodial Services at Ft Belvoir, VA Solicitation Number: W91QV1-14-B-0006 - SEALED BID The Mission Installation and Contracting Command (MICC), 9410 Jackson Loop, Ft Belvoir, VA 22060, plans to issue a Solicitation for Post-Wide Custodial Services at Ft Belvoir, VA. REQUIREMENT SCOPE: The Contractor shall provide all personnel, equipment, tools, material, supervision, and other items and services necessary to perform post-wide custodial work on Ft Belvoir, VA. This includes, but it not limited to, sweeping, mopping, removal of trash, cleaning of restrooms, dusting, cleaning stairs and landings and any other areas as specified in the PWS. The applicable North American Industrial Classification Code (NAICS Code) is 561720. The Period of Performance (POP) will cover the Base Year Plus Four (4) One-Year Options. There will be a site visit scheduled at a later date. This action is a 100% competitive 8(a) set aside. Point of Contact is Nekia Williams (Contractor), 9410 Jackson Loop, Bldg 1425, Ft Belvoir, VA 22060 or nekia.l.williams.ctr@mail.mil Bid opening is set for on or about 2 September 2014 at 1400 hours local time. The solicitation notices and any/all amendments will be posted and available for viewing and downloading at Army Single Face to Industry (ASFI) Website https://acquisition .army.mil/asfi/ at no charge. No paper copies will be issued. When the solicitation is posted, it is incumbent upon the interested parties to review the aforementioned site regularly for any updates/amendments to this requirement. All prospective bidders must have a Commercial and Government Entity Code (CAGE CODE) and be registered in the System for Award Managment (SAM) at www.sam.gov. Tentative date for issuance of the Solicitation is on or about 1 August 2014. POC: Nekia Williams (Contractor) nekia.l.williams.ctr@mail.mil

C--Indefinite Delivery Contracts for A-E Services, Nation-Wide 8(a)

Department of the Army, U.S. Army Corps of Engineers | Published March 17, 2015  -  Deadline August 24, 2014
cpvs

1. CONTRACT INFORMATION: a. General. This nation-wide A-E Services contract is being procured in accordance with the Brooks Act (Public Law [P.L.] - 92-582) and implemented in the Federal Acquisition Regulation (FAR) Subpart 36. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. This announcement is set-aside for 8(a) firms. The contract is anticipated to be awarded on or about April 2015. Solicitation period at minimum will be 30 calendar days from the posting date. It is anticipated that one contract will be awarded from this announcement for an estimated total of $20,000,000 and will have a 1-year base period and four 1-year option periods. A Minimum Guarantee amount of $2,500 will apply to the Base Period only. The contract awarded under this announcement will be administered by the Fort Worth District and the Fort Worth District may elect to transfer capacity to other USACE Districts in support of the Department of Homeland Security, as well as military, civil works, and International and Interagency Support (IIS) Customers. North American Industrial Classification System code is 541330, which has standard size of $15 Million. Projects are anticipated to be Nationwide, in support of the Department of Homeland Security and the Fort Worth District, Southwestern Division, U.S. Army Corps of Engineers. However, Task Orders under the resultant IDC may be awarded for projects anywhere in the U.S. or its territories or possessions. b. Contract Award Procedure: To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instruction on registering with the SAM, please see the SAM Web site at https://www.sam.gov/. NO STATE-LEVEL certifications shall be accepted. The Service Contract Act will apply to this acquisition. The proposed services will be obtained by a Negotiated Firm-Fixed Price Contract. c. Nature of Work: The services necessary for each requirement will be negotiated and awarded as individual Task Orders. The A-E shall furnish all services, materials, supplies, and supervision required to fully complete each Task Order. 2. PROJECT INFORMATION: A-E Services are expected for but not limited to facilities and infrastructure engineering, design and construction projects for the agencies under Department of Homeland Security (e.g. Border Patrol Stations, Highway Checkpoints, Detention facilities, administration facilities, Vehicle Maintenance Facilities, Drug Seizure Vault, Communication towers, Forward Operating Bases, roads and lighting, border fence and gates, hangers). A-E Services are expected for primarily engineering and design services to include but not be limited to any or all of the following related services: Program and Project Management; Development of Request for Proposal (RFP) packages; multi-disciplined design support and consultant services; scoping, design, drafting, and planning services for new construction and/or renovation, demolition and alterations of existing facilities; construction programming; construction cost estimating; topographic or boundary surveys; on site construction oversight; various engineering studies and site investigations; facility condition assessments using the BUILDER Sustainment Management System; ASHRAE Level I, II & III Energy Audits; value engineering services; subsurface geotechnical investigation and testing. Environmental studies/surveys and abatement design may also be required. Services also may include, but not be limited to any or all of the following: research analysis; pre-design site-assessment; feasibility and concept studies; interior design; space planning and programming; development of design concepts/standards; value engineering; life cycle cost analysis; and post award shop drawing review. Additional services include but not limited to: construction inspection; preparation of record drawings; soils engineering; preparation of operational maintenance manuals; environmental studies; National Historic Preservation Act analysis and documentation; historic and cultural resource studies - site identification surveys; design review; seismic analysis; design construction cost reconciliation; environmental testing; site evaluation; remediation design; state regulator or EPA compliance for hazardous materials such as petroleum products, automotive chemicals, asbestos, lead, and radon; design security and communications systems; designing fire protection and life safety systems; and other technical services related to project requirements as specified in individual contract Task Orders. Other Studies and Related Services: The A-E shall have knowledge and experience of spatial concepts and state-of-the art Geographic Information System (GIS) and the performance of complex spatial data management and analyses. A-E must be capable of the acquisition, storage, retrieval, analysis, manipulation, dissemination, display and management of geospatial data using a desktop based platform; developing, managing, and manipulating digital data bases; developing and executing customized software applications; developing and executing computer modeling/simulations depicting end-state conditions; preparing maps and graphics; CADD conversion; CADD/GIS interoperability; developing, implementing and maintaining enterprise GIS systems; designing, implementing, and maintaining web pages and portals meeting DoD regulations; Federal Geographic Data Committee (FGDC) metadata standards compliance; SDSFIE (Spatial Data Standard) and AEC (Architectural Engineering CADD Standard) compliance; and on-site geospatial management. Other services included such things as planning services, site selection services, relocation services, document processing, testing services, professional experts at hearings, and photographs. Design considerations may include landscaping, architectural hardware, architectural evaluations, electronic and communications systems, force protection, environmental or EPA regulatory considerations including storm water pollution prevention plans and Section 404 Permit considerations. NEPA compliance includes but not be limited to preparing Environmental Impact Statement (EIS). Project deliverables may include engineering studies, environmental surveys (wetlands/waters of the U.S., asbestos, lead based paint, soil, etc.),soil borings/samples for testing, boring logs, CADD produced plans specifications prepared utilizing Specsintact software (government furnished software) using Unified Facilities Guide Specifications, construction cost estimates prepared utilizing MII (government furnished software)(MII cost estimating software will be provided by the Government with data base information purchased by the A-E), and design analysis. All work must be done by or under the direct supervision of licensed professional engineers or registered architects. The selected 8(a) A-E firms will need to demonstrate capability to perform at least 50 percent of the contract work listed below in accordance with EP 715-1, Chapter 3-8c which can be found at: http://www.publications.usace.army.mil/Portals/76/Publications/EngineerPamphlets/EP_715-1-7.pdf. In particular, in order to be awarded a small business contract the A-E firm will perform at least 50 percent of the cost of the contract incurred from personnel with its own employees. 3. SELECTION CRITERIA: Selection criteria for this acquisition are listed below in descending order of importance (first by major criterion and then by each sub-criterion), Criteria: (a)-(d) are primary criteria; item (e) is the secondary criteria and will only be used as tie-breakers among technically equal firms. (a) Specialized Experience and Technical Competence (Ensure that all special experience requirements are reflected on appropriate personnel resumes at Section E, Part I, SF 330). The contractor must demonstrate expertise in the following: (i) Recent experience (within the past 5 years) and performing work on a wide variety of sites located within the United States, its territories and possessions in a manner that complies with Federal, State, and Local laws and regulations. Demonstrate a minimum of three (3) examples within the past 5 years showing specialized experience and technical competence in the design of Government facilities with over One Million dollars ($1,000,000) construction costs. (ii) Demonstrate the capability to design projects incorporating the latest DoD Force Protection/Anti-Terrorism criteria (including any additional service requirements by the Department of Homeland Security), IBC and UFC codes, and LEED certification criteria. (iii) Demonstrate experience completing facility condition assessments using the BUILDER Sustainment Management System and ASHRAE Level I, II & III Energy Audits. (iv) Demonstrate specialized experience in the design of Department of Homeland Security and Border Patrol facilities or comparable non-government facilities. Specialized experience in the design of Government and DOD facilities will also be considered. (v) Firms must demonstrate experience in evaluating contractor's submittals and performing construction surveillance. (vi) Firms must demonstrate experience in design and survey for abatement of asbestos, lead-based paint, and the handling/disposal of other toxic and regulated substances. A HTRW survey team member must have demonstrated experience in use of a suitable X-ray fluorescence device during on-site surveys for lead-based paint and have access to same. (vii) Firms must demonstrate success in prescribing the use of recovered materials, achieving waste reduction, pollution prevention, energy efficiency and conservation in facility design. (viii) Firms must demonstrate the ability to prepare construction cost estimates using the program MII, latest version. (ix) Firms must demonstrate prior experience in use of Government-furnished Specsintact software in preparing project specifications. (x) Firms must demonstrate the ability to submit drawings in AutoCAD, Revit and Bently Microstation utilizing current versions. (xi) Firms must demonstrate the following expertise: a) using ArcGIS and/or Web services and associated extensions; b) building and maintaining multi-user geo-database in SQL and/or Oracle; c) executing ArcGIS Server Enterprise for Oracle and SQL server; d) developing and implementing geoprocessing scripts using Python, Java, VB, Secure Socket Layer, VB.NET, C#(2005), Visual Basic, and AML; e) developing, implementing, and maintaining web-pages and web portals; f) CADD conversion and CADD/GIS interoperatability; g) operating map survey-grade GPS unit; h) the ability to provide on-site GIS support; i) Building information modeling (BIM). (b) Professional Qualifications: This Indefinite Delivery Contract will require the A-E Contractor to demonstrate that all expertise requirements are reflected on key personnel resumes in section E, Part I, SF330. None of the required personnel can be dual disciplined (except that the Life Safety Specialist can be one of the required registered Architects if qualified) and the Certified Energy Manager can be one of the Mechanical or Electrical Engineers, i.e. a separate employee must be on the Design Team except as noted for each stated requirement above to meet the personnel required. Ensure that resumes are provided for each of the required Architects, Engineers, and other personnel specifically required. Evaluation of each discipline will consider education, registration, relevant project experience within the last five years, and longevity with the firm. Resumes for the survey crew and testing lab are not required. Resumes for the asbestos/lead-based paint survey personnel are required. Repeat Resume Page as needed to provide all required resumes. Following is a list of the key personnel, minimum requirements and the minimum number required under the acquisition: (i) Two Project Managers; minimum of five years of experience on DoD projects and PMP Certification is highly desired; (ii) Three Registered Architects, one Registered Landscape Architect, one Registered Interior Designer, Three licensed Electrical Engineers, Three licensed Mechanical Engineers, One licensed Geotech Engineer, One AEE Certified Energy Manager, Three licensed Civil Engineers, Two Environmental Engineers, Two licensed Structural Engineers - with degree from an accredited university engineering program (ABET, NAAB), plus a minimum of 5 years work experience in their field of expertise for all position listed in this paragraph; (iii) One GIS Analyst, One Geographic Data Processor, One Database Manager, One Web Programmer, One Web Administrator, One System Administrator, One Application Programmer - minimum of five years of experience in related field and certification is highly desired for all positions listed in this paragraph; (iv) One Qualified Fire Protection Engineer (A qualified fire protection engineer is defined as an individual meeting one of the following conditions: 1) An engineer having a Bachelor of Science or Master of Science Degree in Fire Protection Engineering from an accredited university engineering program, plus a minimum of 5 years work experience in fire protection engineering; 2) A licensed Professional Engineer (P.E.) who has passed the fire protection engineering written examination administered by the National Council of Examiners for Engineering and Surveys (NCEES); or 3) A registered professional P.E. in a related engineering discipline with a minimum of 5 years experience, dedicated to fire protection engineering that can be verified with documentation), (v) One Life Safety Specialist, Two certified environmental survey personnel (asbestos, lead-based paint, soil, etc.) - minimum of five years of experience in the field of expertise for all position listed in this paragraph; (vi) One certified Value Engineer, One experienced MII Cost Engineers, One Professional Land Surveyor and survey crew, a geologist or soils engineer; minimum of five years of experience in related field of expertise for all positions listed in this paragraph except the survey crew. (c) Past Performance: Past performance on DoD contracts with respect to compliance with contract and task order terms, quality of work, adherence to schedules, cost control, communication, and issue resolution as determined by ACASS and other sources. (d) Capacity: Firms must demonstrate adequate team capacity to perform three task orders concurrently, at three separate locations, not within the same state; firm's capacity is an important consideration because of the potential for unforeseen schedule changes. The following item (e) is the secondary criteria: (e)Volume of DoD contract awards: In Section H, Part I, SF 330, firms must show their past 12 months DoD contract awards stated in dollars (see details in a subsequent paragraph). Include awards to all branch offices. In your calculation, do not consider awards to overseas offices for projects outside the United States, its territories, and possessions. Do not consider awards to a subsidiary if the subsidiary is not normally subject to management decisions, bookkeeping, and policies of a holding or parent company. 4. SUBMITTAL REQUIREMENT: In an effort to reduce paperwork and cost, ALL SF 330s shall be submitted electronically via the AMRDEC SAFE website at: https://safe.amrdec.army.mil At the AMRDEC SAFE website, select the link: For users without a CAC OR if your computer is not configured to read your CAC. Using this option will allow you to access the SAFE as a guest. When completing the information for transmittal at the AMRDEC SAFE website, notification should be submitted to Contract Specialist, Julianne Bowersock, e-mail address: Julianne.L.Bowersock@usace.army.mil (a) Interested firms (single firms or joint ventures) having the capabilities to perform this work must submit an SF 330 (6/2004 Edition), to the site stated above not later than 2:00 P.M. (Central Time) on the response date indicated above. If the response date is a Saturday, Sunday or Federal Holiday, the deadline is 2:00 P.M. the next business day. Late proposal rules found in FAR 15.208 will be followed for late submittals. Submission by telephonic facsimile will not be accepted. Personal visits to discuss this announcement will not be allowed; (b) Submit a compiled SF 330, Part I from the Prime, completed in accordance with the SF 330 instructions and additional instructions herein. It must contain information in sufficient detail to identify the team (prime, other offices of the prime firm and sub-consultants) proposed for the contract. Do not include company literature with the SF 330; (c) Use no smaller than 10 font type using Standard English. Front and back side use of a single page will count as two (2) pages. Pages in excess of the maximums listed will not be used in evaluation of the selection criteria. Submit all pages of the submittal as a one complete file (multiple files will not be accepted). SF330, Part I, ADDITIONAL INSTRUCTIONS: (a) In Section C, identify the discipline/service to be supplied by each consultant; (b) In Section D, include a Team Project Organization Chart to indicate how each firm on the proposed team (prime and each sub-contractor is identified in Section C) integrates into the composite team; (c) In Section E, provide brief resumes of the on-staff or sub-consultant employees you intend to use to perform the work. Only include one role in block 13 except that the Life Safety Specialist may have a dual role. (See para. 3(b)). Resumes must be submitted for each employee required to meet the minimums stated above in paragraph 3(b); (d) In Section F, a maximum of 10 projects including the prime and sub-consultants will be reviewed. Use no more than one page per project; (e) In Section G, Block 26, include the firm and location the person is associated with. The names of all individuals included in the resumes in Section E shall be listed in Block G-26 along with their firm location and their roles even if example project experience in Block G-28 is not applicable; (f) In Section H, provide a narrative to address each of the requirements, including subparagraphs, of items listed in Section 3, Selection Criteria, of this synopsis. When addressing team capabilities; clarify planned capability, existing capability, and prior experiences, if any. Include any other relevant information including a short discussion of why the firm is especially qualified based upon the specific selection criteria listed in Section 3 herein. Under paragraph 3(e) above, provide an itemized summary of DoD contract awards to include Agency, Contract Number/Task Order No., and Project Title and amount. (Note: award of Indefinite Delivery Contracts should not be counted as award amounts; only actual Task Orders.) Generally, provide a brief presentation of internal controls and procedures that demonstrate the firms overall Design Quality Management Plan (DQMP) which provides sufficient information about this plan that clearly explains the ability of the firm to control costs, schedule and quality of work to be submitted to the Government. (A project-specific detailed quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission). Indicate the estimated percentage involvement of each firm on the proposed team. Do not exceed 20 pages for Block H. SF330, PART II, ADDITIONAL INSTRUCTIONS (a) Responding firms must submit a copy of a current and accurate SF 330, Part II for the specific prime, other offices of the prime, joint ventures (JVs) and subcontractor offices proposed to perform the work even if one is already on file. All Part IIs MUST be signed (signed within the past 12 months) and dated either by an original handwritten signature or a cut and pasted facsimile of an original signature. Indicate in Block 5b of each Part II if the firm is a Small Business, HUBZone, Service Disabled Veteran-Owned Small Business, or Woman-Owned Small Business. To be classified as a 8(a), a firm's average annual receipts or sales for the preceding three fiscal years must not exceed $15 Million; (b) In Block No. 4, Part II, provide the Data Universal Numbering system (DUNS) number issued by Dun and Bradstreet Information System (1-866-705-5711) for the prime A-E or Joint Venture. The DUNS number must be for the firm or joint venture performing the work (i.e., not the parent company DUNS number, but a DUNS number specifically for the office performing the work. Each branch office and/or joint venture must have their own DUNS number); and (c) Solicitation packages are not provided for A-E contracts and no additional project information will be given to firms during the announcement period. Facsimile transmissions will not be accepted. Points of Contact: Contracting - Ms. Julianne Bowersock OFFERORS QUESTIONS AND COMMENTS (a) Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet. (b) To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into the system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency USACE, enter Key for this solicitation listed below, and your e-mail address, click login. Fill in all required information and click create user. Verify that information on next screen is correct and click to continue. (c) From this page you may view all bidder inquiries or add inquiry. Only one question will be allowed per inquiry. If multiple questions are included in a single inquiry, only the first question will be answered. All others will remain unanswered until entered in as single inquiries. (d) Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team. (e) The Solicitation Number is: W9126G-14-R-0087. (f) The Bidder Inquiry Key is: HPN5MN-B767WP. (g) The Bidder Inquiry System will be closed to new inquiries seven (7) calendar days prior to proposal submission in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. If the System is not closed in a timely manner, an inquiry posted within seven calendar days of the receipt of proposals will still be regarded as untimely and will not be afforded a substantive response. (h) Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. (i) The bidder call center operates weekdays from 8am to 5pm U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 1-800-428-HELP (1-800-428-4357). (j) Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals. This is not a request for proposal. Phone calls to discuss the solicitation are discouraged unless absolutely necessary. Personal visits for the purpose of discussing this solicitation are not allowed. To verify your proposal has been delivered you may e-mail julianne.l.bowersock@usace.army.mil.

D--Local Exchange Services for Fort Leonard Wood, MO.

Department of the Army, Army Contracting Command | Published July 16, 2014  -  Deadline September 15, 2014
cpvs

The Army Network Enterprise Technology Command (NETCOM) has a requirement for local telephone exchange services for Fort Leonard Wood, MO to include commercial subscriber lines, digital access trunks, Primary Rate Interface (PRI) trunks, and direct inward dialing (DID) numbers. The proposed award will be a firm-fixed price type contract for a base year and four one-year options. All Incumbent and Competitive Local Exchange Carriers certified by the State of Alaska may submit an offer. Sources responding to this requirement must indicate in writing whether they are a large, small, disadvantaged and /or women-owned business. The Standard Industrial Classification (SIC) for this acquisition is 4813. Release of the Request for Proposal (RFP) is anticipated on or about 21 July 2014. When released the RFP can be viewed and downloaded from the Army Single Face to Industry (ASFI) Acquisition Business Web Site located at https://acquisition.army.mil/. Please e-mail questions relating to this notice to the Contracting Officer. A pre-proposal meeting and site visit for this requirement is scheduled for 19 August 2014 at 10:00 AM (local time) at the Fort Leonard Wood Network Enterprise Center (NEC). Offerors are encouraged to attend. Offerors planning to attend must submit a request via e-mail to the Contracting Officer no later than 12 August 2014. Contracting Officer: Scot Stedman, 520-538-6931, e-mail: scot.c.stedman.civ@mail.mil.

C--Nationwide AE Services in support of the Dept. of Homeland Security and limited Nationwide for USACE SWD

Department of the Army, U.S. Army Corps of Engineers | Published August 21, 2015  -  Deadline September 25, 2014
cpvs

1. CONTRACT INFORMATION: a. General. This nation-wide A-E Services contract is being procured in accordance with the Brooks Act (Public Law [P.L.] - 92-582) and implemented in the Federal Acquisition Regulation (FAR) Subpart 36. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. This announcement is for unrestricted firms. The contract is anticipated to be awarded on or about April 2015. Solicitation period at minimum will be 30 calendar days from the posting date. It is anticipated that three contracts will be awarded from this announcement with a $48,000,000 total capacity for each contract and will have a 1-year base period and four 1-year option periods. A Minimum Guarantee amount of $2,500 will apply to the Base Period only. The contract awarded under this announcement will be administered by the Fort Worth District and the Fort Worth District may elect to transfer capacity to other USACE Districts in support of the Department of Homeland Security, as well as military, civil works, and Interagency and International Support (IIS) Customers. North American Industrial Classification System code is 541330, which has standard size of $15 Million Projects are anticipated to be Nationwide, in support of the Department of Homeland Security and the Fort Worth District, Southwestern Division, U.S. Army Corps of Engineers. However, Task Orders under the resultant IDC may be awarded for projects anywhere in the U.S. or its territories or possessions. b. Contract Award Procedure: To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instruction on registering with the SAM, please see the SAM Web site at https://www.sam.gov/. NO STATE-LEVEL certifications shall be accepted. The Service Contract Act will apply to this acquisition. The proposed services will be obtained by a Negotiated Firm-Fixed Price Contract. c. Nature of Work: The services necessary for each requirement will be negotiated and awarded as individual Task Orders. The A-E shall furnish all services, materials, supplies, and supervision required to fully complete each Task Order. 2. PROJECT INFORMATION: A-E Services are expected for but not limited to facilities and infrastructure engineering, design and construction projects for the agencies under Department of Homeland Security (e.g. Border Patrol Stations, Highway Checkpoints, Detention facilities, administration facilities, Vehicle Maintenance Facilities, Drug Seizure Vault, Communication towers, Forward Operating Bases, roads and lighting, border fence and gates, hangers). A-E Services are expected for primarily engineering and design services to include but not be limited to any or all of the following related services: Program and Project Management; Development of Request for Proposal (RFP) packages; multi-disciplined design support and consultant services; scoping, design, drafting, and planning services for new construction and/or renovation, demolition and alterations of existing facilities; construction programming; construction cost estimating; topographic or boundary surveys; on site construction oversight; various engineering studies and site investigations; facility condition assessments using the BUILDER Sustainment Management System; ASHRAE Level I, II & III Energy Audits; value engineering services; subsurface geotechnical investigation and testing. Environmental studies/surveys and abatement design may also be required. Services also may include, but not be limited to any or all of the following: research analysis; pre-design site-assessment; feasibility and concept studies; interior design; space planning and programming; development of design concepts/standards; value engineering; life cycle cost analysis; and post award shop drawing review. Additional services include but not limited to: construction inspection; preparation of record drawings; soils engineering; preparation of operational maintenance manuals; environmental studies; National Historic Preservation Act analysis and documentation; historic and cultural resource studies - site identification surveys; design review; seismic analysis; design construction cost reconciliation; environmental testing; site evaluation; remediation design; state regulator or EPA compliance for hazardous materials such as petroleum products, automotive chemicals, asbestos, lead, and radon; design security and communications systems; designing fire protection and life safety systems; and other technical services related to project requirements as specified in individual contract Task Orders. Other Studies and Related Services: The A-E shall have knowledge and experience of spatial concepts and state-of-the art Geographic Information System (GIS) and the performance of complex spatial data management and analyses. A-E must be capable of the acquisition, storage, retrieval, analysis, manipulation, dissemination, display and management of geospatial data using a desktop based platform; developing, managing, and manipulating digital data bases; developing and executing customized software applications; developing and executing computer modeling/simulations depicting end-state conditions; preparing maps and graphics; CADD conversion; CADD/GIS interoperability; developing, implementing and maintaining enterprise GIS systems; designing, implementing, and maintaining web pages and portals meeting DoD regulations; Federal Geographic Data Committee (FGDC) metadata standards compliance; SDSFIE (Spatial Data Standard) and AEC (Architectural Engineering CADD Standard) compliance; and on-site geospatial management. Other services included such things as planning services, site selection services, relocation services, document processing, testing services, professional experts at hearings, and photographs. Design considerations may include landscaping, architectural hardware, architectural evaluations, electronic and communications systems, force protection, environmental or EPA regulatory considerations including storm water pollution prevention plans and Section 404 Permit considerations. NEPA compliance includes but not be limited to preparing Environmental Impact Statement (EIS). Project deliverables may include engineering studies, environmental surveys (wetlands/waters of the U.S., asbestos, lead based paint, soil, etc.),soil borings/samples for testing, boring logs, CADD produced plans specifications prepared utilizing Specsintact software (government furnished software) using Unified Facilities Guide Specifications, construction cost estimates prepared utilizing MII (government furnished software)(MII cost estimating software will be provided by the Government with data base information purchased by the A-E), and design analysis. All work must be done by or under the direct supervision of licensed professional engineers or registered architects. 3. SELECTION CRITERIA: Selection criteria for this acquisition are listed below in descending order of importance (first by major criterion and then by each sub-criterion), Criteria: (a)-(d) are primary criteria; item (e) is the secondary criteria and will only be used as tie-breakers among technically equal firms. (a) Specialized Experience and Technical Competence (Ensure that all special experience requirements are reflected on appropriate personnel resumes at Section E, Part I, SF 330). The contractor must demonstrate expertise in the following: (i) Recent experience (within the past 5 years) and performing work on a wide variety of sites located within the United States, its territories and possessions in a manner that complies with Federal, State, and Local laws and regulations. Demonstrate a minimum of three (3) examples within the past 5 years showing specialized experience and technical competence in the design of Government facilities with over One Million dollars ($1,000,000) construction costs. (ii) Demonstrate the capability to design projects incorporating the latest DoD Force Protection/Anti-Terrorism criteria (including any additional service requirements by the Department of Homeland Security), IBC and UFC codes, and LEED certification criteria. (iii) Demonstrate experience completing facility condition assessments using the BUILDER Sustainment Management System and ASHRAE Level I, II & III Energy Audits. (iv) Demonstrate specialized experience in the design of Department of Homeland Security and Border Patrol facilities or comparable non-government facilities. Specialized experience in the design of Government and DOD facilities will also be considered. (v) Firms must demonstrate experience in evaluating contractor's submittals and performing construction surveillance. (vi) Firms must demonstrate experience in design and survey for abatement of asbestos, lead-based paint, and the handling/disposal of other toxic and regulated substances. A HTRW survey team member must have demonstrated experience in use of a suitable X-ray fluorescence device during on-site surveys for lead-based paint and have access to same. (vii) Firms must demonstrate success in prescribing the use of recovered materials, achieving waste reduction, pollution prevention, energy efficiency and conservation in facility design. (viii) Firms must demonstrate the ability to prepare construction cost estimates using the program MII, latest version. (ix) Firms must demonstrate prior experience in use of Government-furnished Specsintact software in preparing project specifications. (x) Firms must demonstrate the ability to submit drawings in AutoCAD, Revit and Bently Microstation utilizing current versions. (xi) Firms must demonstrate the following expertise: a) using ArcGIS and/or Web services and associated extensions; b) building and maintaining multiuser geo-database in SQL and/or Oracle; c) executing ArcGIS Server Enterprise for Oracle and SQL server; d) developing and implementing geoprocessing scripts using Python, Java, VB, Secure Socket Layer, VB.NET, C#(2005), Visual Basic, and AML; e) developing, implementing, and maintaining web-pages and web portals; f) CADD conversion and CADD/GIS interoperatability; g) operating map survey-grade GPS unit; h) the ability to provide on-site GIS support; i) Building information modeling (BIM). (b) Professional Qualifications: This Indefinite Delivery Contract will require the A-E Contractor to demonstrate that all expertise requirements are reflected on key personnel resumes in section E, Part I, SF330. None of the required personnel can be dual disciplined (except that the Life Safety Specialist can be one of the required registered Architects if qualified) and the Certified Energy Manager can be one of the Mechanical or Electrical Engineers, i.e. a separate employee must be on the Design Team except as noted for each stated requirement above to meet the personnel required. Ensure that resumes are provided for each of the required Architects, Engineers, and other personnel specifically required. Evaluation of each discipline will consider education, registration, relevant project experience within the last five years, and longevity with the firm. Resumes for the survey crew and testing lab are not required. Resumes for the asbestos/lead-based paint survey personnel are required. Repeat Resume Page as needed to provide all required resumes. Following is a list of the key personnel, minimum requirements and the minimum number required under the acquisition: (i) Two Project Managers; minimum of five years of experience on DoD projects and PMP Certification is highly desired; (ii) Three Registered Architects, one Registered Landscape Architect, one Registered Interior Designer, Three licensed Electrical Engineers, Three licensed Mechanical Engineers, One licensed Geotech Engineer, One AEE Certified Energy Manager, Three licensed Civil Engineers, Two Environmental Engineers, Two licensed Structural Engineers - with degree from an accredited university engineering program (ABET, NAAB), plus a minimum of 5 years work experience in their field of expertise for all position listed in this paragraph; (iii) One GIS Analyst, One Geographic Data Processor, One Database Manager, One Web Programmer, One Web Administrator, One System Administrator, One Application Programmer - minimum of five years of experience in related field and certification is highly desired for all positions listed in this paragraph; (iv) One Qualified Fire Protection Engineer (A qualified fire protection engineer is defined as an individual meeting one of the following conditions: 1) An engineer having a Bachelor of Science or Master of Science Degree in Fire Protection Engineering from an accredited university engineering program, plus a minimum of 5 years work experience in fire protection engineering; 2) A licensed Professional Engineer (P.E.) who has passed the fire protection engineering written examination administered by the National Council of Examiners for Engineering and Surveys (NCEES); or 3) A registered professional P.E. in a related engineering discipline with a minimum of 5 years experience, dedicated to fire protection engineering that can be verified with documentation), (v) One Life Safety Specialist, Two certified environmental survey personnel (asbestos, lead-based paint, soil, etc.) - minimum of five years of experience in the field of expertise for all position listed in this paragraph; (vi) One certified Value Engineer, One experienced MII Cost Engineers, One Professional Land Surveyor and survey crew, a geologist or soils engineer; minimum of five years of experience in related field of expertise for all positions listed in this paragraph except the survey crew. (c) Past Performance: Past performance on DoD contracts with respect to compliance with contract and task order terms, quality of work, adherence to schedules, cost control, communication, and issue resolution as determined by ACASS and other sources. (d) Capacity: Firms must demonstrate adequate team capacity to perform three task orders concurrently, at three separate locations, not within the same state; firm's capacity is an important consideration because of the potential for unforeseen schedule changes. The following item (e) is the secondary criteria: (e)Volume of DoD contract awards: In Section H, Part I, SF 330, firms must show their past 12 months DoD contract awards stated in dollars (see details in a subsequent paragraph). Include awards to all branch offices. In your calculation, do not consider awards to overseas offices for projects outside the United States, its territories, and possessions. Do not consider awards to a subsidiary if the subsidiary is not normally subject to management decisions, bookkeeping, and policies of a holding or parent company. (f) SB and SDB Participation: Firms must show the extent of participation of SB, SDB, WOSB, Service Disabled VOSB, HubZone SB, and HBCU/MI in the proposed contract team, measured as a percentage of the estimated effort; the greater the participation, the greater the consideration. Ensure that claimed SDB firms meet the criteria set forth earlier in this announcement. 4. SUBMITTAL REQUIREMENT: In an effort to reduce paperwork and cost, ALL SF 330s shall be submitted electronically via the AMRDEC SAFE website at: https://safe.amrdec.army.mil At the AMRDEC SAFE website, select the link: For users without a CAC OR if your computer is not configured to read your CAC. Using this option will allow you to access the SAFE as a guest. When completing the information for transmittal at the AMRDEC SAFE website, notification should be submitted to Contract Specialist, Julianne Bowersock, email address: Julianne.L.Bowersock@usace.army.mil (a) Interested firms (single firms or joint ventures) having the capabilities to perform this work must submit an SF 330 (6/2004 Edition), to the site stated above not later than 2:00 P.M. (Central Time) on the response date indicated above. If the response date is a Saturday, Sunday or Federal Holiday, the deadline is 2:00 P.M. the next business day. Late proposal rules found in FAR 15.208 will be followed for late submittals. Submission by telephonic facsimile will not be accepted. Personal visits to discuss this announcement will not be allowed; (b) Submit a compiled SF 330, Part I from the Prime, completed in accordance with the SF 330 instructions and additional instructions herein. It must contain information in sufficient detail to identify the team (prime, other offices of the prime firm and sub-consultants) proposed for the contract. Do not include company literature with the SF 330; (c) Use no smaller than 10 font type using Standard English. Front and back side use of a single page will count as two (2) pages. Pages in excess of the maximums listed will not be used in evaluation of the selection criteria. Submit all pages of the submittal as a one complete file (multiple files will not be accepted). SF330, Part I, ADDITIONAL INSTRUCTIONS: (a) In Section C, identify the discipline/service to be supplied by each consultant; (b) In Section D, include a Team Project Organization Chart to indicate how each firm on the proposed team (prime and each sub-contractor is identified in Section C) integrates into the composite team; (c) In Section E, provide brief resumes of the on-staff or sub-consultant employees you intend to use to perform the work. Only include one role in block 13 except that the Life Safety Specialist may have a dual role. (See para. 3(b). Resumes must be submitted for each employee required to meet the minimums stated above in paragraph 3(b); (d) In Section F, a maximum of 10 projects including the prime and subconsultants will be reviewed. Use no more than one page per project; (e) In Section G, Block 26, include the firm and location the person is associated with. The names of all individuals included in the resumes in Section E shall be listed in Block G-26 along with their firm location and their roles even if example project experience in Block G-28 is not applicable; (f) In Section H, provide a narrative to address each of the requirements, including subparagraphs, of items listed in Section 3, Selection Criteria, of this synopsis. When addressing team capabilities; clarify planned capability, existing capability, and prior experiences, if any. Include any other relevant information including a short discussion of why the firm is especially qualified based upon the specific selection criteria listed in Section 3 herein. Under paragraph 3(e) above, provide an itemized summary of DoD contract awards to include Agency, Contract Number/Task Order No., and Project Title and amount. (Note: award of Indefinite Delivery Contracts should not be counted as award amounts; only actual Task Orders.) Generally, provide a brief presentation of internal controls and procedures that demonstrate the firms overall Design Quality Management Plan (DQMP) which provides sufficient information about this plan that clearly explains the ability of the firm to control costs, schedule and quality of work to be submitted to the Government. (A project-specific detailed quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission). Indicate the estimated percentage involvement of each firm on the proposed team. Do not exceed 20 pages for Block H. SF330, PART II, ADDITIONAL INSTRUCTIONS (a) Responding firms must submit a copy of a current and accurate SF 330, Part II for the specific prime, other offices of the prime, joint ventures (JVs) and subcontractor offices proposed to perform the work even if one is already on file. All Part IIs MUST be signed (signed within the past 12 months) and dated either by an original handwritten signature or a cut and pasted facsimile of an original signature. Indicate in Block 5b of each Part II if the firm is a Small Business, HUBZone, Service Disabled Veteran-Owned Small Business, or Woman-Owned Small Business. (b) In Block No. 4, Part II, provide the Data Universal Numbering system (DUNS) number issued by Dun and Bradstreet Information System (1-866- 705-5711) for the prime A-E or Joint Venture. The DUNS number must be for the firm or joint venture performing the work (i.e., not the parent company DUNS number, but a DUNS number specifically for the office performing the work. Each branch office and/or joint venture must have their own DUNS number); and (c) Solicitation packages are not provided for A-E contracts and no additional project information will be given to firms during the announcement period. Facsimile transmissions will not be accepted. Points of Contact: Contracting - Ms. Julianne Bowersock OFFERORS QUESTIONS AND COMMENTS (a) Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet. (b) To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into the system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency USACE, enter Key for this solicitation listed below, and your e-mail address, click login. Fill in all required information and click create user. Verify that information on next screen is correct and click to continue. (c) From this page you may view all bidder inquiries or add inquiry. Only one question will be allowed per inquiry. If multiple questions are included in a single inquiry, only the first question will be answered. All others will remain unanswered until entered in as single inquiries. (d) Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team. (e) The Solicitation Number is: W9126G-14-R-0089 (f) The Bidder Inquiry Key is: RKR7US-44I8DC (g) The Bidder Inquiry System will be closed to new inquiries seven (7) calendar days prior to proposal submission in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. If the System is not closed in a timely manner, an inquiry posted within seven calendar days of the receipt of proposals will still be regarded as untimely and will not be afforded a substantive response. (h) Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. (i) The bidder call center operates weekdays from 8am to 5pm U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 1-800-428- HELP (1-800-428-4357). (j) Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals. This is not a request for proposal. Phone calls to discuss the solicitation are discouraged unless absolutely necessary. Personal visits for the purpose of discussing this solicitation are not allowed. To verify your proposal has been delivered you may e-mail julianne.l.bowersock@usace.army.mil. Contracting Office Address: USACE District, Fort Worth, PO Box 17300/819 Taylor Street, Fort Worth, TX 76102-0300 Point of Contact(s): Robin Prince, 817-886-1045

C--Indefinite Delivery Contracts for A-E Services, Nation-Wide SDVOSB

Department of the Army, U.S. Army Corps of Engineers | Published September 26, 2014  -  Deadline October 25, 2014
cpvs

1. CONTRACT INFORMATION: a. General. This nation-wide A-E Services contract is being procured in accordance with the Brooks Act (Public Law [P.L.] - 92-582) and implemented in the Federal Acquisition Regulation (FAR) Subpart 36. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. This announcement is for unrestricted firms. The contract is anticipated to be awarded on or about April 2015. Solicitation period at minimum will be 30 calendar days from the posting date. It is anticipated that one contract will be awarded from this announcement with a $15,000,000 total capacity for each contract and will have a 1-year base period and four 1-year option periods. A Minimum Guarantee amount of $2,500 will apply to the Base Period only. The contract awarded under this announcement will be administered by the Fort Worth District and the Fort Worth District may elect to transfer capacity to other USACE Districts in support of the Department of Homeland Security, as well as military, civil works, and Interagency and International Support (IIS) Customers. North American Industrial Classification System code is 541330, which has standard size of $15 Million Projects are anticipated to be Nationwide, in support of the Department of Homeland Security and the Fort Worth District, Southwestern Division, U.S. Army Corps of Engineers. However, Task Orders under the resultant IDC may be awarded for projects anywhere in the U.S. or its territories or possessions. b. Contract Award Procedure: To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instruction on registering with the SAM, please see the SAM Web site at https://www.sam.gov/. NO STATE-LEVEL certifications shall be accepted. The Service Contract Act will apply to this acquisition. The proposed services will be obtained by a Negotiated Firm-Fixed Price Contract. c. Nature of Work: The services necessary for each requirement will be negotiated and awarded as individual Task Orders. The A-E shall furnish all services, materials, supplies, and supervision required to fully complete each Task Order. 2. PROJECT INFORMATION: A-E Services are expected for but not limited to facilities and infrastructure engineering, design and construction projects for the agencies under Department of Homeland Security (e.g. Border Patrol Stations, Highway Checkpoints, Detention facilities, administration facilities, Vehicle Maintenance Facilities, Drug Seizure Vault, Communication towers, Forward Operating Bases, roads and lighting, border fence and gates, hangers). A-E Services are expected for primarily engineering and design services to include but not be limited to any or all of the following related services: Program and Project Management; Development of Request for Proposal (RFP) packages; multi-disciplined design support and consultant services; scoping, design, drafting, and planning services for new construction and/or renovation, demolition and alterations of existing facilities; construction cost estimating; topographic or boundary surveys; on site construction oversight; various engineering studies and site investigations; facility condition assessments using the BUILDER Sustainment Management System; ASHRAE Level I, II & III Energy Audits; subsurface geotechnical investigation and testing. Environmental studies/surveys and abatement design may also be required. Services also may include, but not be limited to any or all of the following: research analysis; pre-design site-assessment; feasibility and concept studies; interior design; space planning and programming; development of design concepts/standards; value engineering; life cycle cost analysis; and post award shop drawing review. Additional services include but not limited to: construction inspection; preparation of record drawings; soils engineering; preparation of operational maintenance manuals; environmental studies; National Historic Preservation Act analysis and documentation; historic and cultural resource studies - site identification surveys; design review; seismic analysis; design construction cost reconciliation; environmental testing; site evaluation; remediation design; state regulator or EPA compliance for hazardous materials such as petroleum products, automotive chemicals, asbestos, lead, and radon; design security and communications systems; designing fire protection and life safety systems; and other technical services related to project requirements as specified in individual contract Task Orders. Other Studies and Related Services: The A-E shall have knowledge and experience of spatial concepts and state-of-the art Geographic Information System (GIS) and the performance of complex spatial data management and analyses. A-E must be capable of the acquisition, storage, retrieval, analysis, manipulation, dissemination, display and management of geospatial data using a desktop based platform; developing, managing, and manipulating digital data bases; developing and executing customized software applications; developing and executing computer modeling/simulations depicting end-state conditions; preparing maps and graphics; CADD conversion; CADD/GIS interoperability; developing, implementing and maintaining enterprise GIS systems; designing, implementing, and maintaining web pages and portals meeting DoD regulations; Federal Geographic Data Committee (FGDC) metadata standards compliance; SDSFIE (Spatial Data Standard) and AEC (Architectural Engineering CADD Standard) compliance; and on-site geospatial management. Other services included such things as planning services, site selection services, relocation services, document processing, testing services, professional experts at hearings, and photographs. Design considerations may include landscaping, architectural hardware, architectural evaluations, electronic and communications systems, force protection, environmental or EPA regulatory considerations including storm water pollution prevention plans and Section 404 Permit considerations. NEPA compliance includes but not be limited to preparing Environmental Impact Statement (EIS). Project deliverables may include engineering studies, environmental surveys (wetlands/waters of the U.S., asbestos, lead based paint, soil, etc.),soil borings/samples for testing, boring logs, CADD produced plans specifications prepared utilizing Specsintact software (government furnished software) using Unified Facilities Guide Specifications, construction cost estimates prepared utilizing MII (government furnished software)(MII cost estimating software will be provided by the Government with data base information purchased by the A-E), and design analysis. All work must be done by or under the direct supervision of licensed professional engineers or registered architects. 3. SELECTION CRITERIA: Selection criteria for this acquisition are listed below in descending order of importance (first by major criterion and then by each sub-criterion), Criteria: (a)-(d) are primary criteria; item (e) is secondary criteria and will only be used as a tie-breaker among technically equal firms. (a) Specialized Experience and Technical Competence: For subparagraphs (i) - (x) below, provide examples of projects, completed within the past 5 years, on which the required experience was obtained. Ensure that all experience requirements are reflected on appropriate personnel resumes at Section E, Part I, SF 330. Also show applicable experience by the firm in Section F, Part I, SF 330. The contractor must demonstrate expertise in the following: (i) Experience performing work on a wide variety of sites located within the United States, its territories and possessions in a manner that complies with Federal, State, and Local laws and regulations. Provide a minimum of three (3) examples of projects that exhibit specialized experience and technical competence in the design of Government facilities with over One Million dollars ($1,000,000) construction costs. (ii) Experience in the design of projects incorporating the latest DoD Force Protection/Anti-Terrorism criteria (including any additional service requirements by the Department of Homeland Security), IBC and UFC codes, and LEED certification criteria. (iii) Experience completing facility condition assessments using the BUILDER Sustainment Management System and ASHRAE Level I, II & III Energy Audits. Provide examples where this was accomplished. (iv) Experience in the design of Department of Homeland Security and Border Patrol facilities or comparable non-government facilities. Specialized experience in the design of Government and DOD facilities will also be considered. Provide example where this was accomplished. (v) Experience in evaluating contractor submittals and performing construction surveillance. (vi) Experience in design and survey for abatement of asbestos, lead-based paint, and the handling/disposal of other toxic and regulated substances. A firm must have experience in use of a suitable X-ray fluorescence device during on-site surveys for lead-based paint and have access to same. (vii) Experience in prescribing the use of recovered materials, achieving waste reduction, pollution prevention, energy efficiency and conservation in facility design. . (viii) Experience preparing construction cost estimates using the program MII, latest version. (ix) Experience in use of Government-furnished Specsintact software in preparing project specifications. (x) Experience with preparing drawings in AutoCAD, Revit and Bently Microstation utilizing current versions. (b) Professional Qualifications: This Indefinite Delivery Contract will require the A-E Contractor to demonstrate that all expertise requirements identified below are reflected on key personnel resumes in section E, Part I, SF330. None of the required personnel can be dual disciplined (except that the Life Safety Specialist can be one of the required registered Architects if qualified) and the Certified Energy Manager can be one of the Mechanical or Electrical Engineers, i.e. a separate employee must be on the Design Team except as noted for each stated requirement above to meet the personnel required. Ensure that resumes are provided for each of the required Architects, Engineers, and other personnel specifically required. Evaluation of each discipline will consider education, registration, relevant project experience within the last five years, and longevity with the firm. Resumes for the survey crew and testing lab are not required. Resumes for the asbestos/lead-based paint survey personnel are required. Repeat Resume Page as needed to provide all required resumes. Following is a list of the key personnel, minimum requirements and the minimum number required under the acquisition: (i) Two Project Managers; minimum of five years of experience on DoD construction projects is required and PMP Certification is highly desired; (ii) Three Registered Architects, one Registered Landscape Architect, one Registered Interior Designer, Three licensed Electrical Engineers, Three licensed Mechanical Engineers, One licensed Geotech Engineer, One AEE Certified Energy Manager, Three licensed Civil Engineers, Two licensed Environmental Engineers, Two licensed Structural Engineers - with degree from an accredited university engineering and Architectural program (ABET, NAAB), plus a minimum of 5 years work experience in their field of expertise for all position listed in this paragraph; (iii) One GIS Analyst, One Geographic Data Processor, One Database Manager, One Web Programmer, One Web Administrator, One System Administrator, One Application Programmer - minimum of five years of experience in related field is required and certification is highly desired for all positions listed in this paragraph; (iv) One Qualified Fire Protection Engineer (A qualified fire protection engineer is defined as an individual meeting one of the following conditions: 1) An engineer having a Bachelor of Science or Master of Science Degree in Fire Protection Engineering from an accredited university engineering program, plus a minimum of 5 years work experience in fire protection engineering; 2) A licensed Professional Engineer (P.E.) who has passed the fire protection engineering written examination administered by the National Council of Examiners for Engineering and Surveys (NCEES); or 3) A registered professional P.E. in a related engineering discipline with a minimum of 5 years experience, dedicated to fire protection engineering that can be verified with documentation), (v) One Life Safety Specialist, Two certified environmental survey personnel (asbestos, lead-based paint, soil, etc.) - minimum of five years of experience in the field of expertise for all position listed in this paragraph; (vi) One experienced MII Cost Engineers, One Professional Land Surveyor and survey crew, a geologist or licensed soils engineer - minimum of five years of experience in related field of expertise for all positions listed in this paragraph except the survey crew. (c) Past Performance: Past performance on USACE contracts within last six years will be evaluated with respect to compliance with contract and task order terms, quality of work, adherence to schedules, cost control, communication, and issue resolution as determined by ACASS. (d) Capacity: Firms must demonstrate adequate team capacity to perform three task orders concurrently, at three separate locations, not within the same state; firm's capacity is an important consideration because of the potential for unforeseen schedule changes. The following item (e) is the secondary criteria: (e)Volume of DoD contract awards: In Section H, Part I, SF 330, firms must show their past 12 months DoD contract awards stated in dollars. Include awards to all branch offices. In your calculation, do not consider awards to overseas offices for projects outside the United States, its territories, and possessions. Do not consider awards to a subsidiary if the subsidiary is not normally subject to management decisions, bookkeeping, and policies of a holding or parent company. 4. SUBMITTAL REQUIREMENT: In an effort to reduce paperwork and cost, ALL SF 330s shall be submitted electronically via the AMRDEC SAFE website at: https://safe.amrdec.army.mil At the AMRDEC SAFE website, select the link: For users without a CAC OR if your computer is not configured to read your CAC. Using this option will allow you to access the SAFE as a guest. When completing the information for transmittal at the AMRDEC SAFE website, notification should be submitted to Contract Specialist, Julianne Bowersock, e-mail address: Julianne.L.Bowersock@usace.army.mil (a) Interested firms (single firms or joint ventures) having the capabilities to perform this work must submit an SF 330 (6/2004 Edition), to the site stated above not later than 2:00 P.M. (Central Time) on the response date indicated above. If the response date is a Saturday, Sunday or Federal Holiday, the deadline is 2:00 P.M. the next business day. Late proposal rules found in FAR 15.208 will be followed for late submittals. Submission by telephonic facsimile will not be accepted. Personal visits to discuss this announcement will not be allowed; (b) Submit a compiled SF 330, Part I from the Prime, completed in accordance with the SF 330 instructions and additional instructions herein. It must contain information in sufficient detail to identify the team (prime, other offices of the prime firm and sub-consultants) proposed for the contract. Do not include company literature with the SF 330; (c) Use no smaller than 10 font type using Standard English. Front and back side use of a single page will count as two (2) pages. Pages in excess of the maximums listed will not be used in evaluation of the selection criteria. Submit all pages of the submittal as a one complete file (multiple files will not be accepted). SF330, Part I, ADDITIONAL INSTRUCTIONS: (a) In Section C, identify the discipline/service to be supplied by each consultant; (b) In Section D, include a Team Project Organization Chart to indicate how each firm on the proposed team (prime and each sub-contractor is identified in Section C) integrates into the composite team; (c) In Section E, provide brief resumes of the on-staff or sub-consultant employees you intend to use to perform the work. Only include one role in block 13 except that the Life Safety Specialist may have a dual role. (See para. 3(b). Resumes must be submitted for each individual proposed to meet the required minimums stated above in paragraph 3(b); (d) In Section F, a maximum of 10 projects including the prime and sub-consultants will be reviewed. Use no more than one page per project; An Indefinite Delivery Contract can be counted as one project, however, the one page limit applies. (e) In Section G, Block 26, include the firm and location the person is associated with. The names of all individuals included in the resumes in Section E shall be listed in Block G-26 along with their firm location and their roles even if example project experience in Block G-28 is not applicable; (f) In Section H, provide a narrative to address each of the requirements, including subparagraphs, of items listed in Section 3, Selection Criteria, of this synopsis. When addressing team capabilities; clarify planned capability, existing capability, and prior experiences, if any. Include any other relevant information including a short discussion of why the firm is especially qualified based upon the specific selection criteria listed in Section 3 herein. Under paragraph 3(e) above, provide an itemized summary of DoD contract awards for the past 12 months to include Agency, Contract Number/Task Order No., and Project Title and amount. Do not include additional project information in the summary. (Note: award of Indefinite Delivery Contracts should not be counted as award amounts; only actual Task Orders.) Generally, provide a brief presentation of internal controls and procedures that demonstrate the firms overall Design Quality Management Plan (DQMP) which provides sufficient information about this plan that clearly explains the ability of the firm to control costs, schedule and quality of work to be submitted to the Government. (A project-specific detailed quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission). Indicate the estimated percentage involvement of each firm on the proposed team. Do not exceed 20 pages for Block H. The DOD contract awards summary, noted above, does not count toward the 20 page limit for Block H SF330, PART II, ADDITIONAL INSTRUCTIONS (a) Responding firms must submit a copy of a current and accurate SF 330, Part II for the specific prime, other offices of the prime, joint ventures (JVs) and subcontractor offices proposed to perform the work even if one is already on file. All Part IIs MUST be signed (signed within the past 12 months) and dated either by an original handwritten signature or a cut and pasted facsimile of an original signature. Indicate in Block 5b of each Part II if the firm is a Small Business, HUBZone, Service Disabled Veteran-Owned Small Business, or Woman-Owned Small Business. (b) In Block No. 4, Part II, provide the Data Universal Numbering system (DUNS) number issued by Dun and Bradstreet Information System (1-866-705-5711) for the prime A-E or Joint Venture. The DUNS number must be for the firm or joint venture performing the work (i.e., not the parent company DUNS number, but a DUNS number specifically for the office performing the work. Each branch office and/or joint venture must have their own DUNS number); and (c) Solicitation packages are not provided for A-E contracts and no additional project information will be given to firms during the announcement period. Facsimile transmissions will not be accepted. Points of Contact: Contracting - Ms. Julianne Bowersock OFFERORS QUESTIONS AND COMMENTS (a) Technical inquiries and questions relating to SF330 procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet. (b) To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into the system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency USACE, enter Key for this solicitation listed below, and your e-mail address, click login. Fill in all required information and click create user. Verify that information on next screen is correct and click to continue. (c) From this page you may view all bidder inquiries or add inquiry. Only one question will be allowed per inquiry. If multiple questions are included in a single inquiry, only the first question will be answered. All others will remain unanswered until entered in as single inquiries. (d) Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team. (e) The Solicitation Number is: W9126G-14-R-0088 (f) The Bidder Inquiry Key is: AD37UV-289IRQ (g) The Bidder Inquiry System will be closed to new inquiries seven (7) calendar days prior to submission of the SF330s in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. If the System is not closed in a timely manner, an inquiry posted within seven calendar days of the receipt of the SF330s will still be regarded as untimely and will not be afforded a substantive response. (h) Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. (i) The bidder call center operates weekdays from 8am to 5pm U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 1-800-428-HELP (1-800-428-4357). (j) Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of the SF330s. This is not a request for proposal. Phone calls to discuss the solicitation are discouraged unless absolutely necessary. Personal visits for the purpose of discussing this solicitation are not allowed. To verify your SF330 has been delivered you may e-mail julianne.l.bowersock@usace.army.mil.

77--Musical Instruments

Department of the Army, FedBid | Published October 23, 2014  -  Deadline October 30, 2014
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W91151-15-T-0012 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-77. The associated North American Industrial Classification System (NAICS) code for this procurement is 339992 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-10-30 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Ft Hood, TX 76544 The MICC Fort Hood requires the following items, Exact Match Only, to the following: LI 001: Electric Guitar Amplifier. Kemper Profiler Rack Rackmount Guitar Amplifier., 1, EA; LI 002: Electric Guitar Amplifier. Fuchs Overdrive Supreme 50 - Head w/Triode-Pentode Switch, 1, EA; LI 003: Electric Guitar Amplifier. Bogner Ecstasy 101B 100W Tube Guitar Amplifier Head with EL34., 1, EA; LI 004: Electric Guitar Amplifier. Epifani AL112 Combo Bass Amplifier., 1, EA; LI 005: Electric Guitar Amplifier. Eden WT550 Travel bass Head. 500 watts, 1, EA; LI 006: Electric Guitar Amplifier cabinet. Epifani UL2-410 Bass Speaker Cabinet. 4 Ohm., 1, EA; LI 007: Electric Bass Guitar. Lakland Skyline DJ-5. Darryl Jones signature 5-string Solidbody., 1, EA; LI 008: Electric Bass Guitar. Lakland Deluxe 55-94 5-string Bass. 3-Tone, 1, EA; LI 009: Electric Guitar. Suhr Classic Antique HSS Electric Guitar. 3-Tone., 1, EA; LI 010: Electric Guitar. Heritage H-150 CM - Ultra Top., 1, EA; LI 011: Electric Guitar. Gretsch guitar G6136T White Falcon. Hollowbody. Single cutaway., 1, EA; LI 012: Acoustic Guitar. Martin HD-28VE Acoustic-Electric Guitar., 1, EA; LI 013: Marching Snare Drum. yanaha SFZ Marching Snare Drum. 14x12 inch., 3, EA; LI 014: Electric Piano. Yamaha MOTIF XF6 61-key Music Production Synthesizer., 1, EA; LI 015: Electric Piano. Yamaha MX61 61 Key Music Synthesizer, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Hood intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Hood is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In responding to this request for quote, you must provide the manufacturer's name and part numbers AND salient characteristics of the items you are proposing to sell to the Government. Regardless of the terminology used in each RFQ ("Brand Name or Equal", or "meet minimum stated specifications), the information describing what you are offering must be physically written into the seller's bid specification block. Salient characteristics are defined as "pronounced features of an item that identify it describe its size and composition, functional intent, and/or operational capabilities or limits." When researching product capabilities, you must, as a minimum, respond with feature for feature comparisons in order for your product to be technically evaluated for sufficiency. Responses such as "bidding exact match", "as specified", or cutting and pasting the Government's specification information into the seller's bid specification block are not acceptable responses. Offerors who respond in any of the three examples directly above will be eliminated from the competition without consideration of their offer. If you are bidding the same product as is being requested, your seller bid specification should indicate: "Bidding on Manufacturer (Insert Name) and Part Number (Insert Number). If you are bidding on an "or equal" product, your seller bid specification must state: Bidding on Manufacturer (Insert Name) and Part Number (Insert Number), containing the following salient characteristics (insert salient characteristics). If your response does not contain all of the required information called out in this notice, your quote will be determined nonresponsive and will not be considered for award. The apparent awardee shall acknowledge acceptance of any and all re-postings (amendments), in writing, prior to any award resulting from this solicitation. The applicable NAICS code for this procurement is 339992 with the related size standard of 500 employees. The NAICS code identified herein must appear in FAR 52.212-3 "Offeror Representations and Certifications" in SAM and the vendor must be actively registered in that NAICS prior to receipt of quote in order to receive an award. Offeror are reminded that failure to comply ?shall render their quote as non-responsive.? Fedbid is a mechanism used by this office to solicit for common use commercial items in accordance with FAR 13.5. Fedbid is NOT a forum for filing protests against the Government. Attempts to file protests through Fedbid will not be considered legitimate as they do not conform to the requirements in the Federal Acquisition Regulation (FAR). It is preferable that disputes and protests be resolved as quickly as possible at the lowest level possible before considering the more formal process described below. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC, as an Alternate Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.10. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. The address for filing a protest directly with AMC is: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or e-mail: usarmy.redstone.usamc.mbx.protests@mail.mil. Packages sent Federal Express or UPS should be addressed to: HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Rm 2-1SE3401 Ft Belvoir, VA 22060-5527. The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the HQ, AMC to obtain the AMC-Level Protest procedures. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-2, Evaluation- Commercial Items; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The Contractor shall NOT make partial line item shipments against any resulting purchase order/contract issued as a result of this solicitation; e.g., if a line item on the contract reads - Computer, 10 each, the contractor shall NOT ship 3 computers on one shipment and 7 computers on a second shipment. Failure to adhere to this requirement will result in invoices being rejected in WAWF and/or a delay in payment for non-conforming shipped quantities. Company must be registered on System for Award Management (SAM) prior to receipt of quote in order to receive an award. Offeror are reminded that failure to comply ?shall render their quote as non-responsive.? If company is not registered in SAM, they may do so by going to SAM web site at www.sam.gov. Proposed responders must submit any questions concerning this solicitation before October 27, 2014 at 1:00 PM CST to reasonably expect a response from the Government. Those questions not received within the prescribed date will not be considered. New equipment ONLY, NO remanufactured products FOB Destination CONUS (CONtinental U.S.) Bid MUST be good for 90 days, after submission. No partial bids will be accepted. See attached applicable clauses
Categories
  United StatesFort-bragg-nc-28310 - Show all cities
Fort drum, ny 13602 (176)Fort irwin, ca 92310 (45)Fort rucker, al 36362 (44)Fort knox, ky 40121 (43)Fort riley, ks 66442 (36)Fort worth, tx (36)Fort hood, tx 76544 (30)Fort bragg, nc 28310 (28)Fort stewart, ga 31314 (28)Fort stewart, ga 31314 (24)Jblm, wa 98433 (23)Fort bliss, tx 79916 (21)Fort knox, ky 40121 (20)Fort hood, tx 76544 (16)Fort irwin, ca 92310 (15)Fort leonard wood, mo 65473 (15)Fort rucker, al 36362 (14)Ft bliss, tx 79916 (13)Fort belvoir, va (13)Fort campbell, ky 42223 (13)Fort carson, co (12)Fort riley, ks 66442 (11)Joint base lewis-mcchord, wa 98433 (11)Fort bragg, nc 28310 (10)Fort carson, co 80913 (10)Fort irwin , ca 92310 (10)Fort bragg, nc (9)Fort drum , ny 13602 (9)Fort polk, la 71459 (9)Special shipping instructions. (9)Fort belvoir, va 22060 (8)Fort lee, va 23801 (8)Joint base lewis mcchord, wa 98433 (8)Fort knox, ky 40122 (7)Ft drum, ny 13602 (6)Fort bliss, tx 79918 (6)Fort george g meade, md 20755 (6)Fort george g. meade, md 20755 (6)Ft hood, tx 76544 (6)Ft. riley, ks 66442 (6)Fort lee, va 23801 (5)Ft riley, ks 66442 (5)Ft rucker, al 36362 (5)Fort collins, co (5)Fort bliss, tx 79916 (4)Ft bliss , tx 79906 (4)Ft irwin, ca 92310 (4)Fort hood , tx 76544 (4)Fort meade, md (4)Fort meade, md 20755 (4)Fort riley , ks 66442 (4)Mwr -, missouri (4)Fort drum , ny 13602 (3)Fort hood , tx 76544 (3)Fort stewart , ga 31314 (3)Fort bliss, tx 79906 (3)Fort campbell, ky (3)Fort knox, ky 40122 (3)Fort riley, ks (3)Fort rucker , al 36362 (3)Ft bliss, tx 79916 (3)Ft rucker, al 36362 (3)Ft. belvoir, va 22060 (3)Ft. irwin, ca 92310 (3)Ft. stewart, ga 31314 (3)Middleville rd northport, ny (3)Middleville road northport, ny (3)New york, va 13602 (3)Burbeck road fort belvoir, va (2)El paso, tx 79916 (2)Fort meade, md 21144 (2)Fort riley, ks 66441 (2)Fort worth, tx (2)Ft rucker, al 36322 (2)Ft stewart, ga 31313 (2)Ft. hood, tx 76544 (2)Ft. stewart, ga 31313 (2)Fort bragg, nc 28307 (2)Fort drum, ny 13601 (2)Fort george g meade , md 20755 (2)Fort george meade, md 20755 (2)Fort hood, tx 76542 (2)Fort knox , ky 40121 (2)Fort knox, ky (2)Fort polk , la 71459 (2)Fort polk, la (2)Fort smith, ar 72903 (2)Fort stewart , ga 31314 (2)Fort wayne, in (2)Ft drum, ny 13602 (2)Ft irwin, ca 92310 (2)Ft lee, va 23801 (2)Ft steward, ga 31314 (2)Ft stewart, ga 31314 (2)Ft. hood, tx 76544 (2)Ft. lauderdale, fl (2)Harlem , mt 59526 (2)Joint base mdl, nj 08640 (2)Killeen, tx 76544 (2)