Public tenders for industrial in Eglin-fl-32542 United States

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!

Engineering, Science and Technology for Air Force Weapons Research and Development

Department of the Air Force, Air Force Material Command | Published August 10, 2015  -  Deadline August 26, 2015
cpvs

The Air Force Research Laboratory Munitions Directorate (AFRL/RW) anticipates awarding a sole source, cost type, indefinite-delivery, indefinite quantity (IDIQ), task order contract to The Georgia Tech Research Institute (GTRI), Atlanta, GA. The contracting activity for GTRI is the Georgia Tech Applied Research Corp, Georgia Institute of Technology, 505 Tenth St., NW, Atlanta, GA 30332-0420. The anticipated contract will provide for research and development support and other scientific and engineering effort. The task order contract will have a base ordering period of five (5) years and an associated estimated contract ceiling Not-to-Exceed $24.9M. The GTRI contract is anticipated to provide 5 years of uninterrupted essential research and development support and specialized engineering efforts. AFRL/RW has a requirement to maintain certain core capabilities at GTRI that it deems essential, pursuant to 10 U.S.C. 2304(c)(3), as implemented by FAR 6.302-3, Industrial Mobilization; Engineering, Development, or Research Capability; or Expert Services. This acquisition enables AFRL/RW to access established and essential engineering, research and development capabilities at GTRI in the following areas: (1) research, analysis, integration, systems engineering, development, flyable and non-flyable technology demonstrators, prototypes, test and evaluation, and rapid delivery of cutting-edge weapon solutions to the DoD to counter emerging threats affecting national security; (2) test and evaluation technology and matters associated with test range, lab and facility R&D as well as test range, lab and facility systems to implement new technology approaches integrated with or standing alone from classical test ranges, facilities and methods; (3) design hardware and/or software components, sub-systems, systems, platforms and tools that enable distributed and stand alone analysis for sensor/payload performance shall be integrated with guidance, targeting, fusing, air vehicle, propulsion, data links, airborne/ground networks and other sensors for test, evaluation and training. This notice of intent is not a request for competitive quotes. This solicitation is contemplated as a sole source procurement with GTRI; as this educational institution is a Federally-recognized University Affiliated Research Center (UARC) and has maintained a robust strategic relationship with the US Army and other Department of Defense (DoD) and non-DoD agencies since 1971. The purpose of this announcement is to provide information and to promote subcontracting opportunities, if a contract should result from this procurement action. Only US COMPANIES (NOFORN) will be entertained for subcontracting opportunities and potential subcontractors must possess a TOP SECRET facility clearance at the time of award. A determination by the Government not to compete this proposed contract based upon response to this notice is solely within the discretion of the Government. Firms interested in subcontracting opportunities should contact GTRI directly. In accordance with AFFARS 5301.9102, an ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition announcement. Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. AFFARS Clause 5352.201-9101 Ombudsman (Aug 2005) will be incorporated into all contracts awarded under this BAA. The Ombudsman is as follows: Barbara Gehrs, Director of Contracting (AFRL/PK), (937) 904-4407, barbara.gehrs@us.af.mil.

Contractor Operated Civil Engineer Supply Store (COCESS)

Department of the Air Force, Air Force Materiel Command | Published May 6, 2015  -  Deadline May 20, 2015
cpvs

Description: Eglin Air Force Base (AFB), FL, intends to solicit and award an Indefinite Delivery Indefinite Quantity (IDIQ) contract with Firm Fixed Price (FFP) orders for a Contractor Operated Civil Engineer Supply Store (COCESS), as defined in the Statement of Work (SOW). The contractor shall provide all necessary labor, supervision, equipment, supplies, and materials to deliver a simplified method for authorized Civil Engineer personnel and Self-Help customers to purchase materials, equipment and supplies including but not limited to electrical, plumbing, sheet metal, welding, landscaping, heating/air conditioning/ refrigeration/ventilation, pipe fitting, carpentry, pavement and grounds maintenance, electronic monitoring, controls and alarms, painting and wall covering, floor covering, hardware, liquid fuels maintenance, power production, exterior electric, aircraft arresting systems (non-depot parts), water and waste water treatment and distribution and pest control trades. These items shall be used for work orders, construction, recurring maintenance and repair and Self-Help type work. The store shall be located on the installation and provide easy access for authorized individuals and contain a wide variety of commercial and industrial products (i.e., items found in commercial stores like Lowes, Home Depot or other local lumber and building supply stores). The store shall stock high use/consumable items for immediate purchase. Items not stocked but requested need to be made available on the next business day. The store shall provide a customer service center with management personnel that will provide quality customer service. This acquisition will be conducted in accordance with FAR 12 and 15 procedures. The Request for Proposal (RFP) number is FA2823-15-R-4007 and all related attachments will be posted in Federal Business Opportunities (FBO) approximately 15 calendar days after the release of this notice in FBO. The COCESS contract does not replace the use of other contracts that are already established or will be established. Other specific proposal preparation and submission requirements as well as contract terms and conditions will be specified in the resulting RFP. The North American Industry Classification System (NAICS) code for this acquisition is 332510 with a small business standard size of 500 employees. This acquisition will utilize the Trade-Off Source Selection Process in accordance with FAR part 15, Contracting by Negotiation and DoD Source Selection Procedures. Additionally, commercial practices will be utilized in this procurement. Period of performance for the base year is expected to be 1 October 2015 through 30 September 2016, with four (4) additional one- year options. The Government reserves the right not to exercise the Option periods. The following is the anticipated CLIN structure for the basic requirement, without subsequent Option Year CLIN's. CLIN 0001: Store Operations - Operate main store, deliver materials and stock satellite stores IAW Statement of Work. CLIN 0002: Material Reimbursable - Material Reimbursement, High use store stocked item purchased IAW Statement of Work (SOW). CLIN 0003: Contractor shall obtain Free On Board (FOB) destination pricing when available from their sources of supply. CLIN 0004: Hourly rate for store operation outside normal duty hours as required in SOW. Potential offerors should note that a site visit will not be held for this requirement. Prospective offerors must be registered in the System for Award Management (SAM). Registration can be completed by going to https://www.sam.gov/portal/public/SAM/#1 and completing the registration process. The solicitation package will be posted on the Federal Business Opportunities (FBO) website, which can be accessed at http://www.fbo.gov/. Paper copies will not be available. The contractor is responsible for obtaining the solicitation, amendments, and any other documentation from the FBO webpage.

Camera Lenses

Department of the Air Force, Air Force Material Command | Published July 29, 2015  -  Deadline August 14, 2015
cpvs

The Air Force Test Center, Installation Operational Contracting Division, Eglin AFB, Florida 32542 intends to solicit and award a firm-fixed price contract for ten (10) Schneider 10mm 1.9 Ruggedized Camera Lenses and four (4) Schneider 16mm 1.8 Ruggedized Camera Lenses. This is a combined synopsis/solicitation for commercial items prepared under Federal Acquisition Regulation (FAR) Subpart 12.6, Streamlined Procedures as supplemented with additional information included in this notice. This announcement with all attachments constitutes the only solicitation; quotes are being requested and no other written solicitation will be issued. This is Request for Quotation numbered FA2823-15-T-0003. The North American Industry Classification System (NAICS) code for this acquisition is 333314 with a Size Standard of 500 employees. Please identify your business size in your response based upon this standard. This is for total small business set-aside. In accordance with the FAR Subpart 13.106-1(a)(2) offerors are notified that the award will be made to the offer that provides the best value to the government after consideration of technical, price, and delivery aspects of the offer. •1. Requirement: CLIN 0001: Lens, Schneider 10mm Compact F 1.9 Ruggedized, P/N: SCH-27-1991910, Qty: 10 EA (Brand-name or equal) CLIN 0002: Lens, Schneider 16mm Compact F 1.8 Ruggedized, P/N: SCH-27-1991816, Qty: 4 EA (Brand-name or equal) The camera lenses will be installed onto and become an integral part of various High Speed Camera Capture System Gigabit Ethernet Based Cameras capable of up to 10,000 frames per second captures. These cameras will be installed in protective housings, modified Alternate Mission Equipment (AME) Launchers, Chaff/Flare Dispensers and Weapon and Fuel Pylons. The systems will be installed on various high performance military fighters and bombers and be subjected to excessive heat, cold, altitude, and large accelerations and vibrations up to and including entry into destructive flutter vibration. Required Attributes a. C-Mount b. Fixed Focal lengths of 16mm and 10mm each c. Manual Focus, Manual IRIS, with Ring Lock d. Ruggedized Physical Size and Weight The Camera Lenses must be the focal length requested 10 mm and 6 mm respectively and be no larger than 2.5 " long and 2.5" diameter and be a C Mount size screw camera mounting attachment. Compatibility with Existing Camera Mount Locations Camera Lenses shall be compatible with and capable of being installed onto/into existing High Speed Cameras and into protective housing for the high speed cameras without causing redesign of protective mounts. Compatibility with Flight Conditions Cameras must be able to withstand repeated cycles acceleration in all directions generated by flight conditions of high speed, high altitude and high performance flight profiles regularly required for weapon and aircraft testing, up to and including destructive flutter vibration. a. Lenses should be designated as Ruggedized for extreme use. Required Service Life The Camera Lenses shall provide a service life of greater than or equal to 5 years' service life with anticipated test flights once per week. System Components Quality and Lifespan All components shall be of a manufacturer/model having a well-established U. S. track record for dependability, durability and trouble free operation in an industrial environment. Due diligence shall be performed to ensure no components are used that are nearing the end of their manufacturing life cycle or are scheduled for revision. Warranty A one year parts and labor warranty for all lenses. In accordance with, FAR 52.212-1(b)(4), offerors are reminded that as a minimum, offers must show a technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary. Quoted price should include FOB Destination and be valid through 30 September 2015. Required delivery date is no later than 45 days ARO. Expedited delivery schedules accepted. Delivery address: Eglin AFB, Florida 32542. The provisions and clauses incorporated in the attached solicitation are those in effect through Federal Acquisition Circular 2005-83 effective 2 July 2015, DFAR DPN 20150626, and AFFAR AFAC 20150615. Please provide a response to clause DFARS 252.209-7999 with your quotation. Vendors must be registered in System for Award Management (www.sam.gov) with NAICS 333314, before award can be made. All responses must be received no later than 09:00 A.M., Central Standard Time on 14 August 2015. Send all packages via email to Juliet Hall at juliet.hall@us.af.mil. For questions, contact Juliet Hall at 850.882.2789 or by e-mail at juliet.hall@us.af.mil. Attachments: 1. FA2823-15-T-0003-SF 1449-Solicitation/Contract/Order for Commercial Items

13--Communications Box

Department of the Navy, Naval Supply Systems Command | Published August 19, 2016  -  Deadline August 23, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 3905 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89. The associated North American Industrial Classification System (NAICS) code for this procurement is 334290 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-08-23 16:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Eglin, FL 32542 The FLC - Jacksonville requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: Special OTS New Premium 3 Diver hardwire Communications Box. See Statement of Work for more details., 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Jacksonville intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Jacksonville is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-60 and DFARS Change Notice 20120724. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm The NAICS code is 334290______ and the Small Business Standard is _750__. FAR 52.247-34, F.o.b. Destination applies 52.212-2 Evaluation - Commercial Items. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. FAR 52.212-3 Offeror Reps and Certs / FAR 52.212-3 Alt1 Offeror Reps and Certs. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/Far/ 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items. 52.204-10 Reporting Subcontract Awards. 52.219-28 Post-Award Small Business Program Rerepresentation. 52.222-3 Convict Labor 52.222-19 Child Labor--Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-36 Affirmative Action for Workers w/ Disabilities 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. 52.223-18 Contractor Policy to Ban Text Messaging while Driving (SEPT 2010) 52.225-13 Restrictions on Certain Foreign Purchases. 52.232-18 Availability of Funds 252.211-7003 Item Identification & Valuation (AUG 2008) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (MAR 2011) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 252.247-7023 Transportation of Supplies by Sea (MAY 2002) 252.247-7023 (iv) Alt III - ALTERNATE III (MAY 2002) 252.247-7023. 252.225-7000: Buy American Act-Balance of Payments Program Certificate 252.232-7010: Levies on Contract Payments 5252.NS-046P: Prospective Contractor Responsibility 52.212-4: Contract Terms and Conditions-Commercial Items 52.212-1: Instructions to Offerors-Commercial Items 52.252-1:Solicitation Provisions Incorporated by Reference 52.252-2: Clauses Incorporated by Reference 52.237-2: Protection of Government Buildings, Equipment, and Vegetation. Fleet Fast Pay Prohibition on Contracting with Inverted Domestic Corporations Representation (May 2012) Prohibition on Contracting with Inverted Domestic Corporations (May 2012) Control of Government Personnel Work Product (April 1992) Representation Regarding Conviction of a Felony Criminal Violation Under and Federal or State Law (Mar 2012) Requirements Relating to Compensation of Former DOD Officials (Sep 2011) Buy American Act & Balance of Payments (Oct 2011) THIS TERM IS IN EFFECT SHOULD THE BUY BE SET-ASIDE FOR SMALL BUSINESSES : Notice of Total Small Business Set-Aside Financial Services and General Government Appropriations Act (2015) Prohibition on Contracting with Entities that require Certain Internal Confidentiality Agreements Contract Terms and Conditions - Commercial Items System for Award Management.

73--Convection Oven

Department of the Army, FedBid | Published April 1, 2016  -  Deadline April 13, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010814148 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87. The associated North American Industrial Classification System (NAICS) code for this procurement is 335210 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-04-13 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Eglin AFB, FL 32542 The MICC Fort Benning requires the following items, Brand Name or Equal, to the following: LI 001: South bend Model No. SLES/20SC Silver Star Convection Oven, electric, double?deck, standard depth, Solid state controls, interior light, aluminized steel rear, stainless steel Front, top, sides & 6" legs, (2) 1/2 HP, (2) 12 kW, UL, NSF 208v/60/3-ph, 34 amps standard, 2, EA; LI 002: Vulcan Model No. EV36?S?6FP?208 Restaurant Range, electric, 36", (6) 2.0 kW French hot plates, infinite Controls, standard oversized oven, includes (1) rack, stainless steel Front, sides, single deck high shelf & 6" legs, 17.0 kW, 208v, 1, EA; LI 003: True Food Service Equipment Model No. STA1HPT?1S?1S SPEC SERIES? Pass?thru Heated Cabinet, one?section, stainless steel Front & sides, (1) stainless steel door front & rear with locks, cam?lift Hinges, digital temperature control, aluminum interior, (3) chrome Shelves, 5" castors, 1.5KW, NEMA 6?15P, 208?230v/60/1, 9' cord, MADE IN USA, 2, EA; LI 004: Polar King Walk-In: 10x12 Feet 208-230/160 Refrigeration System, 1, EA; LI 005: Vulcan Model No. C24EA6?BSC Convection Steamer, Electric, 2 compartments on 24" cabinet base, (6)12" x 20" x 2?1/2" deep pans total, high output stainless steel steam Generator, staged water fill, manual control with 60?minute timer with Buzzer each compartment, split water line, stainless steel interior, Exterior, frame & flanged feet, 1, EA; LI 006: Shipping, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Benning intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Benning is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this aquisition. The selected Offeror must comply with the following commercial item terms and conditions: FAR 52.209-5, Certification Regarding Responsibility Matters and FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.225-13, Restriction on Certain Foreign Purchases; and 52.232-33, Payment by Electronic Funds Transfer ? Central Contractor Registration. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 Item Identification and Valuation (JUN 2005); 252.246-7000 Material Inspection and receiving Report This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be valid for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified at time of order Payment terms shall be net 30 unless otherwise agreed to by MICC Fort Benning. In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL Submission of Offers in the English Language The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, considering price alone.

58--Motorola Radios, Motorola Batteries, and Motorola Charging Stations

Department of the Army, FedBid | Published April 12, 2016  -  Deadline April 22, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010755091 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87. The associated North American Industrial Classification System (NAICS) code for this procurement is 334310 with a small business size standard of 750.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-04-22 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Eglin AFB, FL 32578 The MICC Fort Benning requires the following items, Brand Name Only (Exact Match), to the following: LI 001: Motorola SRX2200 UHFR 1 Model 3 Portable Radios - Each radio includes ENH: Software Trunking 9600BAUD AN; SW KeySupplemental Data; ENH Astro 25 OTAR w/ Multikey; ENH: AES Encryption; ENH SfS Comprehensive; ADD: P25 Link Layer Authentication; ENH Military Data Package; APX 7000 IMPRES CG SU APX 7000 US/NA; SRX IMPRES REMOTE SPEAKER & MIC; Assembly, Battery, Batt R LI ION 2900; COMMAND Tracker GPS USER License. Each radio delivered operational and assembled., 10, EA; LI 002: Motorola SRX2200 UHFR 1 Model 3 Portable Radio Lithium Ion NiMH Battery, 120, EA; LI 003: Motorola SRX2200 UHFR 1 Model 3 Portable Radio Lithium Ion NiMH Multi Port Battery Charging Station, 8, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Benning intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Benning is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this aquisition. The selected Offeror must comply with the following commercial item terms and conditions: FAR 52.209-5, Certification Regarding Responsibility Matters and FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.225-13, Restriction on Certain Foreign Purchases; and 52.232-33, Payment by Electronic Funds Transfer ? Central Contractor Registration. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 Item Identification and Valuation (JUN 2005); 252.246-7000 Material Inspection and receiving Report This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be valid for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified at time of order Payment terms shall be net 30 unless otherwise agreed to by MICC Fort Benning. In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL Submission of Offers in the English Language The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, considering price alone. "Pursuant to FAR Part 9, the Contracting Officer is required to make a determination regarding the responsibility of the proposed awardee. Following receipt of offers, the Contracting Officer or Specialist will send a form, designed to elicit financial information from an offeror's financial institution, to those offerors having a reasonable chance at receiving the award under this solicitation. You should forward that form to your financial institution and have the financial institution complete and send it directly to the Contract Specialist. For sections 2 and 4 on the document, the financial institution may answer with high, medium or low or they can answer with a numerical amount. The form must be returned to the MICC within three (3) business days. In the absence of this information, the Contracting Officer will have no choice except to find your company "not responsible," a finding which will make you ineligible for award." Award for All or None. The Government intends to award one (1) purchase order as a result of this solicitation. Offers received for less than the stated number if items listed in the solicitation will be considered ineligible for award. Effective 1 October 2014, all personnel requiring access to the installation shall possess either a Common Access Card (CAC), Military ID or Individual temporary pass issued by the Fort Benning Directorate of Emergency Services (DES) pursuant to Army Directive 2014-05, Policy and Implementation Procedures for Common Access Card Credentialing and Installation Access for Un-cleared Contractors.

Corrosion Control - Paint Booth Maintenance

Department of the Air Force, Air Force Materiel Command | Published November 30, 2017  -  Deadline December 14, 2017
cpvs

 This is a combined synopsis/solicitation for commercial services and/or supplies prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will NOT be issued. This is a Request for Quote (RFQ) and the solicitation number for this requirement is FA2823-18-Q-0015. The Contracting Squadron at Eglin, AFB, Florida, requires Corrosion Control for Paint Booths at Buildings 72 and 455. This procurement is a 100% Small Business Set-Aside. Please identify your business size in your response based upon this standard. DESCRIPTION OF REQUIREMENT: CLIN 0001: FFP- PREVENTATIVE MAINTENANCE PROGRAM - Preventative Maintenance Program for Corrosion Control Paint Booth in accordance with (IAW) Performance Work Statement dated 30 November 2017. Period of Performance 01 January 2018 - 31 Dec 2018. Qty: 12 months CLIN 0002: FFP- ABOVE AND BEYOND MAINTENANCE AND REPAIRS. THIS IS A NOT TO EXCEED CLIN - Additional/Miscellaneous IAW PWS dated 30 November 2017. The service provider shall complete all required non-scheduled maintenance to maintain operational readiness. All maintenance not associated with the preventative program (i.e. component replacement due to failure) will be covered under this CLIN. Once a problem is identified the Vendor will notify the Government and provide a proposal for repair to include 2 quotes from 2 separate parts distributors. The Vendor will not perform any repair unless directed by the Contracting Office. The Vendor will invoice referencing this CLIN not to exceed $30,000 per year. Period of Performance 01 January 2018 - 31 December 2018. Qty: 1 Lot CLIN 0003: FFP - 1st STAGE FILTERS - Remove and Replace 1st Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 9 months; first change is July 2018. Period of Performance 01 January 2018 - 31 December 2018. Qty: 1 Lot CLIN 0004: FFP - 2nd STAGE FILTERS - Remove and Replace 2nd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 18 months; first change is August 2018. Period of Performance 01 January 2018 - 31 December 2018. Qty: 1 Lot CLIN 0005: FFP - 3rd STAGE FILTERS - Remove and Replace 3rd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 24 months. Period of Performance 01 January 2018 - 31 December 2018. Qty: 1 Lot CLIN 1001: FFP- PREVENTATIVE MAINTENANCE PROGRAM - Preventative Maintenance Program for Corrosion Control Paint Booth in accordance with (IAW) Performance Work Statement dated 30 November 2017. Period of Performance 01 January 2019 - 31 December 2019. Qty: 12 months CLIN 1002: FFP- ABOVE AND BEYOND MAINTENANCE AND REPAIRS. THIS IS A NOT TO EXCEED CLIN - Additional/Miscellaneous IAW PWS dated 30 November 2017. The service provider shall complete all required non-scheduled maintenance to maintain operational readiness. All maintenance not associated with the preventative program (i.e. component replacement due to failure) will be covered under this CLIN. Once a problem is identified the Vendor will notify the Government and provide a proposal for repair to include 2 quotes from 2 separate parts distributors. The Vendor will not perform any repair unless directed by the Contracting Office. The Vendor will invoice referencing this CLIN not to exceed $30,000 per year. Period of Performance 01 January 2019 - 31 December 2019. Qty: 1 Lot CLIN 1003: FFP - 1st STAGE FILTERS - Remove and Replace 1st Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 9 months; first change is April 2019. Period of Performance 01 January 2019 - 31 December 2019. Qty: 1 Lot CLIN 1004: FFP - 2nd STAGE FILTERS - Remove and Replace 2nd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 18 months. Period of Performance 01 January 2019 - 31 December 2019. Qty: 1 Lot CLIN 1005: FFP - 3rd STAGE FILTERS - Remove and Replace 3rd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 24 months; first change is May 2019. Period of Performance 01 January 2019 - 31 December 2019. Qty: 1 Lot CLIN 2001: FFP- PREVENTATIVE MAINTENANCE PROGRAM - Preventative Maintenance Program for Corrosion Control Paint Booth in accordance with (IAW) Performance Work Statement dated 30 November 2017. Period of Performance 01 January 2020 - 31 December 2020. Qty: 12 months CLIN 2002: FFP- ABOVE AND BEYOND MAINTENANCE AND REPAIRS. THIS IS A NOT TO EXCEED CLIN - Additional/Miscellaneous IAW PWS dated 30 November 2017. The service provider shall complete all required non-scheduled maintenance to maintain operational readiness. All maintenance not associated with the preventative program (i.e. component replacement due to failure) will be covered under this CLIN. Once a problem is identified the Vendor will notify the Government and provide a proposal for repair to include 2 quotes from 2 separate parts distributors. The Vendor will not perform any repair unless directed by the Contracting Office. The Vendor will invoice referencing this CLIN not to exceed $30,000 per year. Period of Performance 01 January 2020 - 31 December 2020. Qty: 1 Lot CLIN 2003: FFP - 1st STAGE FILTERS - Remove and Replace 1st Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 9 months; first change is January 2020. Second change is October 2020. Period of Performance 01 January 2020 - 31 December 2020. Qty: 1 Lot CLIN 2004: FFP - 2nd STAGE FILTERS - Remove and Replace 2nd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 18 months. First change is February 2020. Period of Performance 01 January 2020 - 31 December 2020. Qty: 1 Lot CLIN 2005: FFP - 3rd STAGE FILTERS - Remove and Replace 3rd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 24 months. Period of Performance 01 January 2020 - 31 December 2020. Qty: 1 Lot CLIN 3001: FFP- PREVENTATIVE MAINTENANCE PROGRAM - Preventative Maintenance Program for Corrosion Control Paint Booth in accordance with (IAW) Performance Work Statement dated 30 November 2017. Period of Performance 01 January 2021 - 31 December 2021. Qty: 12 months CLIN 3002: FFP- ABOVE AND BEYOND MAINTENANCE AND REPAIRS. THIS IS A NOT TO EXCEED CLIN - Additional/Miscellaneous IAW PWS dated 30 November 2017. The service provider shall complete all required non-scheduled maintenance to maintain operational readiness. All maintenance not associated with the preventative program (i.e. component replacement due to failure) will be covered under this CLIN. Once a problem is identified the Vendor will notify the Government and provide a proposal for repair to include 2 quotes from 2 separate parts distributors. The Vendor will not perform any repair unless directed by the Contracting Office. The Vendor will invoice referencing this CLIN not to exceed $30,000 per year. Period of Performance 01 January 2021 - 31 December 2021. Qty: 1 Lot CLIN 3003: FFP - 1st STAGE FILTERS - Remove and Replace 1st Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 9 months; first change is July 2021. Period of Performance 01 January 2021 - 31 December 2021. Qty: 1 Lot CLIN 3004: FFP - 2nd STAGE FILTERS - Remove and Replace 2nd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 18 months; first change is August 2021. Period of Performance 01 January 2021 - 31 December 2021. Qty: 1 Lot CLIN 3005: FFP - 3rd STAGE FILTERS - Remove and Replace 3rd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 24 months; first change is May 2021. Period of Performance 01 January 2021 - 31 December 2021. Qty: 1 Lot CLIN 4001: FFP- PREVENTATIVE MAINTENANCE PROGRAM - Preventative Maintenance Program for Corrosion Control Paint Booth in accordance with (IAW) Performance Work Statement dated 30 November 2017. Period of Performance 01 January 2022 - 31 December 2022. Qty: 12 months CLIN 4002: FFP- ABOVE AND BEYOND MAINTENANCE AND REPAIRS. THIS IS A NOT TO EXCEED CLIN - Additional/Miscellaneous IAW PWS dated 30 November 2017. The service provider shall complete all required non-scheduled maintenance to maintain operational readiness. All maintenance not associated with the preventative program (i.e. component replacement due to failure) will be covered under this CLIN. Once a problem is identified the Vendor will notify the Government and provide a proposal for repair to include 2 quotes from 2 separate parts distributors. The Vendor will not perform any repair unless directed by the Contracting Office. The Vendor will invoice referencing this CLIN not to exceed $30,000 per year. Period of Performance 01 January 2022 - 31 December 2022. Qty: 1 Lot CLIN 4003: FFP - 1st STAGE FILTERS - Remove and Replace 1st Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 9 months; first change is April 2022. Period of Performance 01 January 2022 - 31 December 2022. Qty: 1 Lot CLIN 4004: FFP - 2nd STAGE FILTERS - Remove and Replace 2nd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 18 months. Period of Performance 01 January 2022 - 31 December 2022. Qty: 1 Lot CLIN 4005: FFP - 3rd STAGE FILTERS - Remove and Replace 3rd Stage Filters. Provide maintenance IAW PWS dated 30 November 2017. Replace every 24 months. Period of Performance 01 January 2022 - 31 December 2022. Qty: 1 Lot The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-96 effective 06 November 2017, DFAR DPN 20161222 effective 22 December 2016, and AFFAR AFAC 2017-1003 effective 03 October 2017. The North American Industry Classification System code (NAICS) is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, with a size standard of $7.5M. A firm fixed price contract will be awarded. The government will not accept refurbished/used equipment. There will be no advance payments. Offer Submission: Offerors are to complete the required representations listed in the provisions below, as well as the provision DFARS 252.209-7999 in Attachment 5 of the RFQ and return with their offer. Offeror shall submit their offers utilizing the pricing worksheet labeled Attachment 4. Offerors shall provide any necessary literature in order to determine technical acceptability in accordance with the Performance Work Statement and is limited to 5 pages. For the purposes of this RFQ a page is defined as one side. Offers shall provide information regarding recent and relevant past performance and are limited to 5 pages. Offer Evaluation: Evaluation of proposals will occur using the Lowest Price Technically Acceptable (LPTA) approach with Past Performance. See FAR 52.212-2 Evaluation -- Commercial Items for evaluation process. Specific Instructions:a. All offerors are required to complete and submit Attachment #5 of this solicitation IAW 252.209- 7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law. BASIS FOR AWARD: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government. The following factors shall be used to evaluate offers: Lowest Priced Technically Acceptable (LPTA) approach. DELIVERY ADDRESS: Eglin AFB, FL 32542 PROVISIONS/CLAUSES: Provisions and clauses may be obtained via the internet through the following websites: http://farsite.hill.af.mil, http://www.arnet.gov/far/, or http://safaq.hq.af.mil/contracting. The following Federal Acquisition Regulation (FAR) provisions and clauses apply to this solicitation and are incorporated by reference:- FAR 52.203-3, Gratuities- FAR 52.203-12, Limitation on Payments to Influence Certain Federal Transactions- FAR 52.203-16, Preventing Personal Conflicts of Interest- FAR 52.203-17, Contractor Employee Whistleblower Rights and Requirement to Inform Employees of Whistleblower Rights- FAR 52.204-4, Printed or Copied Double-Sided on Postconsumer Fiber Content Paper- FAR 52.204-7, System for Award Management- FAR 52.204-9, Personal Identity Verification of Contractor Personnel- FAR 52.212-1, Instructions to Offerors-Commercial Items - FAR 52.212-4, Contract Terms and Conditions--Commercial Items- FAR 52.228-5, Insurance Work on a Government Installation- FAR 52.232-39, Unenforceability of Unauthorized Obligations- FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors- FAR 52.233-3, Protest After Award- FAR 52.237-2, Protection of Government Building, Equipment and Vegetation- FAR 52.246-4, Inspection of Services - - Fixed Price- FAR 52.247-34, F.O.B. DestinationThe following Defense Federal Acquisition Regulation (DFAR) provisions and clauses apply to this solicitation and are incorporated by reference: - DFARS 252.201-7000, Contracting Officer's Representative- DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials- DFARS 252.203-7001, Prohibition on Persons Convicted of Fraud or Other Defense Contract-Related Felonies- DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights- DFARS 252.203-7005, Representation Relating to Compensation of Former DoD Officials- DFARS 252.204-7003, Control of Government Personnel Work Product- DFARS 252.204-7004 Alt A, System for Award Management Alternate A- DFARS 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls- DFARS 252.204-7011, Alternative Line Item Structure- DFARS 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting- DFARS 252.204-7015, Disclosure of Information to Litigation Support Contractors- DFARS 252.213-7000, Notification to Prospective Suppliers on the Use of Past Performance Information Retrieval System - Statistical Reporting in Past Performance Evaluations- DFARS 252.215-7008, Only One Offer- DFARS 252.223-7008, Prohibition of Hexavalent Chromium- DFARS 252.225-7048, Export Controlled Items- DFARS 252.232-7003, Electronic Submission of Payment Requests- DFARS 252.232-7010, Levies on Contract Payments- DFARS 252.243-7001, Pricing of Contract Modifications- DFARS 252.243-7002, Request for Equitable Adjustment- DFARS 252.244-7000, Subcontract for Commercial Items- DFARS 252.247-7023, Transportation of Supplies by Sea The following Air Force Federal Acquisition Regulation Supplement (AFFARS) provisions and clauses apply to this solicitation and are incorporated by reference: - AFFARS 5352.223-9001, Health and Safety on Government Installations- AFFARS 5352.242-9000, Contractor Access to Air Force Installations The following Federal Acquisition Regulation (FAR) provisions and clauses apply to this solicitation and are incorporated by full text: 52.212-2 - Evaluation -- Commercial Items (Oct 2014)(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical: Acceptable/UnacceptablePast Performance: Acceptable/UnacceptablePrice Price: Price will be reviewed and evaluated based on the CLINs shown above under "Description of Requirement". The Offeror's Price quote will be evaluated on a Total Evaluated Price (TEP) basis to include all option years. The Offeror must submit 5 coefficients for each year in order to be considered acceptable. Technical Evaluation: In accordance with, FAR 52.212-1(b)(4), offerors are reminded that as a minimum, offers must show a technical description of the items being offered insufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary.Table A-1. Technical Acceptable/Unacceptable RatingsRating DescriptionAcceptable Quote clearly meets the minimum requirements of the solicitation.Unacceptable Quote does not clearly meet the minimum requirements of the solicitation. Past Performance Evaluation: The past performance evaluation is an assessment of the offeror's probability of meeting the minimum past performance solicitation requirements. This assessment is based on the offeror's record of relevant and recent past performance information that pertain to the services outlined in the Performance Work Statement. Recency is defined as projects performed within the last three (3) years of the issue month of the solicitation. All references for work not performed within three (3) years of the issue month of the solicitation will not be evaluated. Relevancy is defined as contracts involving type of services and work elements described in the attached Performance Work Statement dated 30 November 2017. Table A-2. Past Performance Acceptable/Unacceptable RatingsRating DescriptionAcceptable Based on the offeror's performance record, the Government has a reasonable expectation that the offeror will successfully perform the required effort, or the offeror's performance record is unknown.Unacceptable Based on the offeror's performance record, the Government does not have a reasonable expectation that the offeror will be able to successfully perform the required effort. No Recent/Relevant Past Performance: In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the offeror may not be evaluated favorably or unfavorably on past performance (see FAR 15.305 (a)(2)(iv)). Therefore, the offeror shall be determined to have unknown (or "neutral") past performance. In the context of acceptability/unacceptability, a neutral rating shall be considered "acceptable." Sources of Past Performance: Offerors shall provide their past performance submission and are limited to 5 pages. Past performance information may be obtained from established systems such as the Past Performance Information Retrieval System (PPIRS), Federal Awardee Performance and Integrity Information System (FAPIIS), or other databases; and may be obtained from other sources available to the Government. Technical and past performance, when combined, are approximately equal to price. Initially, all offers will be ranked according to Price from lowest to highest. The lowest priced offeror will be evaluated for technical acceptability. If this offeror is acceptable then their past performance will be evaluated for acceptability. If the lowest priced offeror is technically acceptable and has acceptable past performance then evaluation will stop and award will be made to the lowest priced offeror. If the lowest priced offeror is not found to be technically acceptable or have acceptable past performance then the evaluation will continue with the next highest offer and continue until an acceptable offeror is found. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) 52.212-3 Offeror Representations and Certifications -- Commercial Items (Jan 2017) Alternate IThe offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.(a) Definitions. As used in this provision--"Administrative merits determination" means certain notices or findings of labor law violations issued by an enforcement agency following an investigation. An administrative merits determination may be final or be subject to appeal or further review. To determine whether a particular notice or finding is covered by this definition, it is necessary to consult section II.B in the DOL Guidance."Arbitral award or decision" means an arbitrator or arbitral panel determination that a labor law violation occurred, or that enjoined or restrained a violation of labor law. It includes an award or decision that is not final or is subject to being confirmed, modified, or vacated by a court, and includes an award or decision resulting from private or confidential proceedings. To determine whether a particular award or decision is covered by this definition, it is necessary to consult section II.B in the DOL Guidance."Civil judgment" means--(1) In paragraph (h) of this provision: A judgment or finding of a civil offense by any court of competent jurisdiction.(2) In paragraph (s) of this provision: Any judgment or order entered by any Federal or State court in which the court determined that a labor law violation occurred, or enjoined or restrained a violation of labor law. It includes a judgment or order that is not final or is subject to appeal. To determine whether a particular judgment or order is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance."DOL Guidance" means the Department of Labor (DOL) Guidance entitled: "Guidance for Executive Order 13673, ‘Fair Pay and Safe Workplaces' ". The DOL Guidance, dated August 25, 2016, can be obtained from www.dol.gov/fairpayandsafeworkplaces."Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program."Enforcement agency" means any agency granted authority to enforce the Federal labor laws. It includes the enforcement components of DOL (Wage and Hour Division, Office of Federal Contract Compliance Programs, and Occupational Safety and Health Administration), the Equal Employment Opportunity Commission, the Occupational Safety and Health Review Commission, and the National Labor Relations Board. It also means a State agency designated to administer an OSHA-approved State Plan, but only to the extent that the State agency is acting in its capacity as administrator of such plan. It does not include other Federal agencies which, in their capacity as contracting agencies, conduct investigations of potential labor law violations. The enforcement agencies associated with each labor law under E.O. 13673 are--(1) Department of Labor Wage and Hour Division (WHD) for--(i) The Fair Labor Standards Act;(ii) The Migrant and Seasonal Agricultural Worker Protection Act;(iii) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act;(v) 41 U.S.C. chapter 67, formerly known as the Service Contract Act;(vi) The Family and Medical Leave Act; and(vii) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors);(2) Department of Labor Occupational Safety and Health Administration (OSHA) for--(i) The Occupational Safety and Health Act of 1970; and(ii) OSHA-approved State Plans;(3) Department of Labor Office of Federal Contract Compliance Programs (OFCCP) for--(i) Section 503 of the Rehabilitation Act of 1973;(ii) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974; and(iii) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity);(4) National Labor Relations Board (NLRB) for the National Labor Relations Act; and(5) Equal Employment Opportunity Commission (EEOC) for--(i) Title VII of the Civil Rights Act of 1964;(ii) The Americans with Disabilities Act of 1990;(iii) The Age Discrimination in Employment Act of 1967; and(iv) Section 6(d) of the Fair Labor Standards Act (Equal Pay Act)."Forced or indentured child labor" means all work or service-(6) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or(7) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties."Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner."Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation," means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c)."Labor compliance agreement" means an agreement entered into between a contractor or subcontractor and an enforcement agency to address appropriate remedial measures, compliance assistance, steps to resolve issues to increase compliance with the labor laws, or other related matters."Labor laws" means the following labor laws and E.O.s:(1) The Fair Labor Standards Act.(2) The Occupational Safety and Health Act (OSHA) of 1970.(3) The Migrant and Seasonal Agricultural Worker Protection Act.(4) The National Labor Relations Act.(5) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act.(6) 41 U.S.C. chapter 67, formerly known as the Service Contract Act.(7) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity).(8) Section 503 of the Rehabilitation Act of 1973.(9) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974.(10) The Family and Medical Leave Act.(11) Title VII of the Civil Rights Act of 1964.(12) The Americans with Disabilities Act of 1990.(13) The Age Discrimination in Employment Act of 1967.(14) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors).(15) Equivalent State laws as defined in the DOL Guidance. (The only equivalent State laws implemented in the FAR are OSHA-approved State Plans, which can be found at www.osha.gov/dcsp/osp/approved_state_plans.html)."Labor law decision" means an administrative merits determination, arbitral award or decision, or civil judgment, which resulted from a violation of one or more of the laws listed in the definition of "labor laws"."Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except-(1) PSC 5510, Lumber and Related Basic Wood Materials;(2) Product or Service Group (PSG) 87, Agricultural Supplies;(3) PSG 88, Live Animals;(4) PSG 89, Subsistence;(5) PSC 9410, Crude Grades of Plant Materials;(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;(8) PSC 9610, Ores;(9) PSC 9620, Minerals, Natural and Synthetic; and(10) PSC 9630, Additive Metal Materials."Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture."Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor."Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;(3) Consist of providing goods or services to marginalized populations of Sudan;(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;(5) Consist of providing goods or services that are used only to promote health or education; or(6) Have been voluntarily suspended.Sensitive technology-(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-(i) To restrict the free flow of unbiased information in Iran; or(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3))."Service-disabled veteran-owned small business concern"-(1) Means a small business concern-(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16)."Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation."Small disadvantaged business concern, consistent with 13 CFR 124.1002," means a small business concern under the size standard applicable to the acquisition, that--(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition."Subsidiary" means an entity in which more than 50 percent of the entity is owned-(1) Directly by a parent corporation; or(2) Through another subsidiary of a parent corporation."Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances."Veteran-owned small business concern" means a small business concern-(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and(2) The management and daily business operations of which are controlled by one or more veterans."Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern --(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and(2) Whose management and daily business operations are controlled by one or more women."Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.Note to paragraph (a): By a court order issued on October 24, 2016, the following definitions in this paragraph (a) are enjoined indefinitely as of the date of the order: "Administrative merits determination", "Arbitral award or decision", paragraph (2) of "Civil judgment", "DOL Guidance", "Enforcement agency", "Labor compliance agreement", "Labor laws", and "Labor law decision". The enjoined definitions will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite.(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.](c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.(1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern.(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern.(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-(i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-(i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern.(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:_____________________________(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--(i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and(ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.(11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) of this provision.)[The offeror shall check the category in which its ownership falls]:____ Black American.___ Hispanic American.___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).___ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal).___ Individual/concern, other than one of the preceding.(d) Representations required to implement provisions of Executive Order 11246 --(1) Previous contracts and compliance. The offeror represents that --(i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and(ii) It [_] has, [_] has not, filed all required compliance reports.(2) Affirmative Action Compliance. The offeror represents that --(i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or(ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American - Supplies, is included in this solicitation.)(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies."(2) Foreign End Products:LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary](3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.(g)(1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.)(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act."(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary](iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product."Other Foreign End Products:LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary](iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Canadian End Products:Line Item No.:_____________________________[List as necessary](3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act'':Canadian or Israeli End Products:Line Item No.: Country of Origin:[List as necessary](4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III.
  • 1