Call +44 800 9755 164

Public tenders for industrial in Welshpool United Kingdom

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!

Disposal of Commercial and Industrial Waste

Waste Management | Published December 11, 2015  -  Deadline December 11, 2015
cpvs

The Councils are seeking a contract for disposal of their commercial and industrial waste that does not use landfill as the primary method of disposal. There is no prescription on the methodology that should be used, but the Councils are seeking to get more value from the collected waste through recovery methods before final disposal.

Industrial Unit Roller Shutter Doors Annual Service / Maintenance / Repair / Replacement

Chesterfield Royal Hospital NHS Foundation Trust | Published December 18, 2015  -  Deadline December 18, 2015
cpvs

North East Derbyshire District Council (NEDDC) is seeking to procure a specialist Contractor to carry out service and maintenance of roller shutter doors installed at various sites within its district. In addition, as part of NEDDC’s continuing programme of investment in its operational assets the tender should include a comprehensive report detailing any repairs, modifications or replacements required to ensure doors are safe, serviceable, fit for purpose and meet the requirements of regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, Approved Document K (England and Wales) and BS-EN 12453:2001 (where applicable

Motor Vehicle, Material Damage & Engineering Insurance & Inspection

Mansfield District Council | Published November 30, 2015  -  Deadline December 22, 2015
cpvs
66000000,

The Council requires a provider(s) of Motor Vehicle, Material Damage and Engineering Inspection Insurance. The Tender Specification has been split into four Lots – Property Combined; Industrial and Commerical Properties ; Motor Vehicle; and Engineering and Inspection. Tenderers may bid for all or some of the Lots. Full details can be found in the tender specification. This is a competitive procurement conducted in accordance with the Competitive Procedure with Negotiation under the EC Consolidated Public Procurement Directive, as implemented by the UK Public Contracts Regulations 2015.

Year In Industry Student, Biodiversity Programme, Defra

Defra Network eTendering Portal | Published March 19, 2016  -  Deadline July 31, 2016
cpvs

Year in Industry Student-Biodiversity Defra 

Chichester District Council - Provision of a Pest Control Service

Chichester District Council | Published December 1, 2015  -  Deadline December 1, 2015
cpvs

The successful tenderer will be required to provide a pest control service within the Chichester District on a concession basis whereby all payments shall be made by members of the general public (the Customer). The Services to be provided includes but is not limited to the control of rats, mice, squirrels and insect pests which are detailed in the schedules. The Services to be carried out will not normally cover the carrying out of pest control work on business, commercial or industrial premises, except in so far as is necessary to enable the Employer to carry out its statutory duty by undertaking surveys or inspections or where the Employer owns / manages the land / property. The Concession will commence on the 1st February 2016 or sooner by agreement, and terminate on the 31st January 2020.

PVC-u Materials (Profiles and Ancillaries)

Bradford Metropolitan District Council | Published December 1, 2015  -  Deadline January 20, 2016
cpvs
42994100, 44000000, 44112120, 44221000, 44221100, 44221110, 44221120, 44221200, 44221211, 44334000

Industrial Services Group is a wholly-owned part of Bradford Council that manufactures, supplies and installs a range of PVC-u windows, PVC-u doors, composite doors in PVC-u frames, and structural curtain walling products to the construction and social housing markets. A key material supplied into this service is the range of PVC-u profiles and ancillaries that are used to construct the products we supply to our customers.

The Council is seeking tenders from Suppliers who are interested in becoming a supply partner and can supply a full range of PVC-u materials that will allow Industrial Services Group to manufacture casement, tilt/turn, fully reversible windows, and composite door and fire check door frames.

The Supplier will also have the capability to take design responsibility for, and to fully support the design, manufacture and supply of, structural curtain walling products.

The profile suite to be supplied shall be a bevelled type and must be in a colour to match or be the equivalent of RAL9016. The profiles must also be certified to BS EN 12608 to a minimum standard of M 11 B for the lifetime of the contract and this must be stamped onto all products.

Approved Suppliers must provide global accreditations for their products for the following standards; Secured by Design, PAS24:2012, BS7412.

The Council is looking for a Supplier who will be able to provide global assessments for the products they supply, such that it will not be necessary for the Council to have to carry out any product testing beyond that necessary to maintain its own product accreditations.

This contract is NOT for glass or hardware; these items will be procured separately to this contract.

 

City of Edinburgh Council Works Framework - Lot 13 - Building Management System Works

David Love | Published December 23, 2015  -  Deadline December 23, 2015
cpvs

The City of Edinburgh Council wishes to appoint up to six suitably experienced and qualified Building Management System Contractors to undertake a series of undefined refurbishment and upgrading projects to Council Properties. It is also anticipated that a reserve list of three contractors will be operated The estimated total cost of the works is £400,000 to £500,000 over the four years of the agreement with individual projects ranging in cost from £25,000.00 to £500,000.00. Generally the work will consist of: • Work to all forms and types of BMS Installations covering, but not limited to, commercial, industrial, domestic, internal, external, small, medium and large scale installations. • Specialist sub contracted systems, such as, but not limited to, electrical, mechanical, heating, ventilation, cooling, air conditioning, sustainability solutions, alternative forms of heating & cooling generation, refrigerant installations, etc. • Access equipment to include but not limited to all forms of scaffold, mast climbers, and mobile access platforms as appropriate to safely carry out defined scopes of work • Downtakings and removal of all forms of, existing BMS installations and associated mechanical services installations. • Removal / replacement / repair of all forms of BMS installation as previously noted above and as defined in the specific project information for each individual project under this framework. • Asbestos removal. • Other adhoc works.

Relocation of TWI's SuperStir Machine

TWI Ltd | Published December 22, 2015  -  Deadline December 22, 2015
cpvs

As part of a new facilities development programme at TWI Cambridge TWI's SuperStir machine needs to be moved to a new location (also on TWI’s Cambridge site) during late February / early March 2016. TWI is one of the world’s foremost independent research and technology organisations, with expertise in solving problems in all aspects of manufacturing, fabrication and integrity management technologies. Established in Cambridge, UK in 1946 and with facilities across the globe, the company has a first class reputation for service through its teams of internationally respected consultants, scientists, engineers and support staff, whose knowledge and expertise is available to its Industrial Members as and when they require. This initiative is funded by TWI with support from the Greater Cambridge, Greater Peterborough Enterprise Partnership. Funding for equipment related work is available in the period up to 30th September 2016. All equipment must be accepted on the Cambridge site by the end of July 2016 at the latest. Please ensure that all correspondence relating to this tender is expressed through the In-tend correspondence facility.

Manufacture of 1 off HTHP Test Vessel.

TWI Ltd | Published December 2, 2015  -  Deadline December 2, 2015
cpvs

Manufacture of 1 off, High Temperature High Pressure test vessel (HTHP), to supplied drawings. Manufacture of 1 off, High Temperature High Pressure condenser (HTHP), to supplied drawings. Supply various Hastelloy C22 fittings and tube. TWI is one of the world’s foremost independent research and technology organisations, with expertise in solving problems in all aspects of manufacturing, fabrication and whole-life integrity management technologies. Established in Cambridge, UK in 1946 and with facilities across the globe, the company has a first class reputation for service through its teams of internationally respected consultants, scientists, engineers and support staff, whose knowledge and expertise is available to its Industrial Members as and when they require. The initiative is funded by industry and by the Greater Cambridge, Greater Peterborough Enterprise Partnership. Funding for equipment will be available in the period up to 30th September 2016 to assist in establishing an extensive facility at the TWI site in Cambridge and to purchase equipment to be used in the facility. All equipment must be accepted on the Cambridge site by the end of July 2016 at the latest. Please be advised that a purchase order will only be issued to the successful candidate once funding has been confirmed.

Gas Alarm System

TWI Ltd | Published January 15, 2016  -  Deadline January 19, 2016
cpvs

TWI Building 18 will be converted from a heavy engineering hall into a sour testing laboratory; there will be a need for a gas alarm and detection system to be installed to protect staff working in here. TWI is one of the world’s foremost independent research and technology organisations, with expertise in solving problems in all aspects of manufacturing, fabrication and whole-life integrity management technologies. Established in Cambridge, UK in 1946 and with facilities across the globe, the company has a first class reputation for service through its teams of internationally respected consultants, scientists, engineers and support staff, whose knowledge and expertise is available to its Industrial Members as and when they require. The initiative is funded by industry and by the Greater Cambridge, Greater Peterborough Enterprise Partnership. Funding for equipment is expected to be available in the period up to 30th September 2016 to assist in establishing an extensive facility at the TWI site in Cambridge and to purchase equipment to be used in the facility. All equipment must be accepted on the Cambridge site by the end of July 2016 at the latest. TWI will hold an open day in relation to this tender on the 5th January 2016 starting at 1pm and expected to last for approximately 1 and a half hours. If you would like to attend please send us attendee names and vehicle registrations using the In-Tend correspondence facility by the 4th January 2016

Dividing the Open Plan Office in Building 18 into 8 Compartments

TWI Ltd | Published January 15, 2016  -  Deadline January 19, 2016
cpvs

TWI Building 18 is being converted for use as a testing laboratory there is a need to divide the open plan office area into 8 compartments. TWI is one of the world’s foremost independent research and technology organisations, with expertise in solving problems in all aspects of manufacturing, fabrication and whole-life integrity management technologies. Established in Cambridge, UK in 1946 and with facilities across the globe, the company has a first class reputation for service through its teams of internationally respected consultants, scientists, engineers and support staff, whose knowledge and expertise is available to its Industrial Members as and when they require. The initiative is funded by industry and by the Greater Cambridge, Greater Peterborough Enterprise Partnership. Funding for equipment is expected to be available in the period up to 30th September 2016 to assist in establishing an extensive facility at the TWI site in Cambridge and to purchase equipment to be used in the facility. All equipment must be accepted on the Cambridge site by the end of July 2016 at the latest. TWI will hold an open day in relation to this tender on the 6th January 2016 starting at 1pm and expected to last for about an hour. If you would like to attend please send us attendee names and vehicle registrations using the In-Tend correspondence facility by the 5th January 2016.

Flooring in TWI Building 18

TWI Ltd | Published January 15, 2016  -  Deadline January 19, 2016
cpvs

This tender is for the uplifting and relaying a flooring in an existing TWI building TWI is one of the world’s foremost independent research and technology organisations, with expertise in solving problems in all aspects of manufacturing, fabrication and whole-life integrity management technologies. Established in Cambridge, UK in 1946 and with facilities across the globe, the company has a first class reputation for service through its teams of internationally respected consultants, scientists, engineers and support staff, whose knowledge and expertise is available to its Industrial Members as and when they require. The initiative is funded by industry and by the Greater Cambridge, Greater Peterborough Enterprise Partnership. Funding for equipment is expected to be available in the period up to 30th September 2016 to assist in establishing an extensive facility at the TWI site in Cambridge and to purchase equipment to be used in the facility. All equipment must be accepted on the Cambridge site by the end of July 2016 at the latest. TWI will hold an open day in relation to this tender on the 6th January 2016 starting at 11am and expected to last for approximately an hour. If you would like to attend please send us attendee names and vehicle registrations using the In-Tend correspondence facility by the 5th January 2016.

Extract System

TWI Ltd | Published January 15, 2016  -  Deadline January 19, 2016
cpvs

This tender is for the first stage design build and installation of an extraction system for TWI building 18. The system will be extended at a later date. TWI is one of the world’s foremost independent research and technology organisations, with expertise in solving problems in all aspects of manufacturing, fabrication and whole-life integrity management technologies. Established in Cambridge, UK in 1946 and with facilities across the globe, the company has a first class reputation for service through its teams of internationally respected consultants, scientists, engineers and support staff, whose knowledge and expertise is available to its Industrial Members as and when they require. The initiative is funded by industry and by the Greater Cambridge, Greater Peterborough Enterprise Partnership. Funding for equipment is expected to be available in the period up to 30th September 2016 to assist in establishing an extensive facility at the TWI site in Cambridge and to purchase equipment to be used in the facility. All equipment must be accepted on the Cambridge site by the end of July 2016 at the latest. TWI will hold an open day in relation to this tender on the 5th January 2016 starting at 2.30pm and expected to last for approximately 1 and a half hours. If you would like to attend please send us attendee names and vehicle registrations by the 4th January 2016 using the In-Tend correspondence facility.

Expression of Interest - For Main Contractor Works - University Of Exeter - Penryn Campus (REEF Building)

FXPLUS  | Published January 8, 2016  -  Deadline January 8, 2016
cpvs

The purpose of this document is to establish whether as a Main Contractor you wish to accept or decline the opportunity to express your interest in this competitive tender. The project consists of the design (from RIBA Stage 4 onwards) and construction of a Renewable Energy Engineering Facility (REEF) subject to the agreement of final contract price, on behalf of Exeter University, at their Penryn Campus, Falmouth, Cornwall. The purpose of the project is to ensure that University of Exeter STEM education infrastructure in Cornwall can meet the demands of both the recent and proposed growth in student numbers and the requirements of research-led and industry-facing science education. In essence, it will enable the research model of multidisciplinary science to be realised in education and attract increased student recruitment. The Renewable Energy Engineering Facility is a facility where students can experience directly how the knowledge gained in lectures or the laboratory is applied to a number of clean energy technologies in a real-world facility. Elements of the facility may also be shared with other campus users. This new flagship facility will enable expansion of University of Exeter’s capacity at the Penryn Campus for individual and small group research projects and industrial networking and collaboration. Users will the complete Renewable Energy teaching programmes including BSc Renewable Energy and BEng/MEng Energy Engineering.

Supply and installation of a 3D Immersive Virtual Reality Facility (Powerwall)

Procurement | Published January 15, 2016  -  Deadline January 28, 2016
cpvs

Supported by the Coventry & Warwickshire Local Enterprise Partnership (LEP), Coventry University will be opening the National Transport Design Centre (NTDC) at its Technology Park in spring 2017. The centre will focus on design research, post-graduate education and industry engagement, both with Original Equipment Manufacturers (OEMs) in the transport sector (automotive, rail, marine and aerospace), suppliers in those sectors and potential new entrants. The facility will be equipped with industrial standard, state-of-the-art equipment, to ensure that NTDC can offer high quality design solutions, both physical and virtual, based on the outcomes of Coventry University’s design research. One of the key facilities will be a 3D immersive VR environment, otherwise known generically as a ‘Powerwall’. This facility will provide the centre with the ability to display, interrogate and manipulate computer generated models in a virtual 3D environment. We have a budget of between £150,000 and £220,000 (excluding VAT). For this budget we require the supply, installation, training and an on-going warranty: to include a 1 year warranty, plus the option to extend annually for a further 2 years. We would also like the option to extend the warranty on an annual basis, for additional years. If additional funding becomes available, we may also wish to enhance the facility further. This contract has not been divided into lots due to the technical nature meaning we will require the same supplier who supplies the Powerwall, to also install and maintain this new facility.

208/YE Chemical Pilot Plant PIN

Faculty of Engineering | Published December 3, 2015  -  Deadline December 3, 2015
cpvs

The University of Sheffield is undertaking a Market Sounding Exercise to provide advance information and seek supply chain information prior to tendering for a new Chemical Engineering Pilot Plant. The Pilot Plant is to be housed in the University’s flagship Diamond building and is anticipated to be installed and commissioned in September 2016. It is envisaged, but not finalised, that the following learning objectives will form the basis of the forthcoming tender: • Students will have experience of operating real, large scale chemical engineering equipment. • Students will understand health and safety issues in an operating environment typical of a chemical plant. • Students will be able to apply fundamental chemical engineering principles to working equipment, including: Lot 1- Power to X pilot plant to convert renewable energy to environmentally friendly diesel fuel Lot 2 - High value manufacturing – continuous manufacture of pharmaceutical solid oral dosage forms Lot 3 - Industrial Control room This is not a call for tenders or a pre-qualification exercise. It is a market sounding exercise to provide advance information of requirements and open a dialogue with the supply chain. We are seeking information that will help inform the strategy, design and specifications for a forthcoming tender(s) for the above facility. Interested parties from all parts of the supply chain are invited to express their interest and downloading and returning the Market Sounding Response Form. We will be opening expressions of interest (and associated information provided) as and when received. This PIN exercise will close on 3rd December 2015, which is the final date for expressions of interest.

Supply and installation of a Milling Machine

Procurement | Published January 15, 2016  -  Deadline January 15, 2016
cpvs

Supported by the Coventry & Warwickshire Local Enterprise Partnership (LEP), Coventry University will be opening the National Transport Design Centre (NTDC) at its Technology Park in spring 2017. The centre will focus on design research, post-graduate education and industry engagement, both with Original Equipment Manufacturers (OEMs) in the transport sector (automotive, rail, marine and aerospace), suppliers in those sectors and potential new entrants. The facility will be equipped with industrial standard, state-of-the-art equipment, to ensure that NTDC can offer high quality design solutions, both physical and virtual, based on the outcomes of Coventry University’s design research. We require a supplier to supply and installation of a Milling Machine. The Milling Machine will be used to support our research activities and is not intended to be used within the context of daily commercial usage. We require a Milling Machine that can facilitate the demands of an ever evolving R&D sector. We have a budget of between £500,000 and £833,000 (excluding VAT). For this budget we require the supply, installation, training and an on-going warranty: to include a 1 year warranty, plus the option to extend annually for a further 2 years. We would also like the option to extend the warranty on an annual basis, for additional years. If additional funding becomes available, we may also wish to enhance the Milling Machine further. This contract has not been divided into lots due to the technical nature meaning we will require the same supplier who supplies the Milling Machine, to also install and maintain this new facility.

Carlisle Care Home Scheme

NHS Cumbria CCG | Published January 5, 2016  -  Deadline January 5, 2016
cpvs

North of England Commissioning Support Unit (NECS) working for and on behalf of NHS Cumbria Clinical Commissioning Group (CCG) who wish to commission a Care Home Scheme in the Carlisle locality. The Carlisle Care Home Team is a mobile community service comprising a multi-disciplinary of a General Practitioner, Senior Nurse, Pharmacist, Registered General Nurses and Support Staff that works in close partnership with the care homes and residential homes within the Carlisle locality. The service aims to improve the quality of care received for Carlisle residents and to enable the patient and their family to be central to the decisions made about their own care, aiming to reduce inappropriate journeys to Accident and Emergency and unnecessary admissions that are unlikely to benefit the individual. Collaborations for the Carlisle Care Home Scheme are encouraged. The contract term for this service is 1 year with the option to extend for 1 year. A bidder event will be held on Thursday 17 December 2015 between 14.00pm and 15:00pm at Cumbria CCG Carlisle Locality Office, Rosehill Industrial Estate, 4 Wavell Drive, Carlisle, Cumbria, CA1 2SE. Bidders will be provided with an overview of the tender documentation and procurement process. Further information regarding registration for this event can be located within Document 1 of the tender documentation. NECS is utilising an electronic tendering tool to manage this procurement and communicate with organisations. Accordingly, all communications and submissions will be conducted via the In-Tend portal. A dedicated helpdesk is available should potential providers have any queries and can be contacted on 0844 2728810 (Monday to Friday 8.30am to 5pm) / support@in-tend.co.uk. Please note the deadline for submission is 12 noon Tuesay 05 January 2016.

City of Edinburgh Council Works Framework - Lot 2 Mechanical Installation Works

David Love | Published December 23, 2015  -  Deadline December 23, 2015
cpvs

The City of Edinburgh Council wishes to appoint up to six suitably experienced and qualified Mechanical Engineering Contractors to undertake a series of undefined refurbishment and upgrading projects to Council Properties. The estimated total cost of the works is £6,000,000.00 over the four years of the agreement with individual projects ranging in cost from GBP25,000.00 to GBP1,500,000 . Generally the work will consist of : • Work to all forms and types of mechanical & domestic water services installations covering, but not limited to, commercial, industrial, domestic, internal, external, small, medium and large scale installations. • Specialist sub contracted systems, such as, but not limited to, BMS Controls, ventilation, cooling, air conditioning, sustainability solutions, alternative forms of heating & cooling generation, refrigerant installations, etc. • Access equipment to include but not limited to all forms of scaffold, mast climbers, and mobile access platforms as appropriate to safely carry out defined scopes of work • Downtakings and removal of all forms of, existing mechanical installations. • Removal / replacement / repair of all forms of mechanical installation as previously noted above • Asbestos removal. • Other adhoc works, Although the contract will predominantly be for refurbishment works there may be a requirement to undertake new build works as part of the agreement. Applicants must have a customer focussed approach and will be expected to work closely and co-operate with the Client, Project Team (in-house and external consultants) building users and other stakeholders. It should be noted that the volume and value of projects instructed under this contract are indicative of historical work programmes and cannot be guaranteed. No claim for loss of profit, direct or indirect disruption costs or loss/expense will be considered where the volume and value of the works instructed under this contract varies from those stated. The agreement shall be for a three year period commencing in October 2016 to October 2019, subject to an annual performance review. The agreement may be extended for a further year, by mutual agreement, to 2020. This Contract will predominantly be used by the City of Edinburgh Council but can also be utilised by the Council’s Arms Length Organisations.

Quote for Newhaven District Heating Network – Heat Mapping & Energy Masterplanning

East Sussex County Council | Published December 9, 2015  -  Deadline December 9, 2015
cpvs

Newhaven Town Council is seeking to commission a high-level study into the technical and commercial feasibility of a heat network infrastructure. This heat network infrastructure will look to utilise waste heat from Veolia’s EfW plant in Newhaven, which processes 210,000 tonnes of waste per year and produces 16MW of electrical energy. The principal outcome of the study is to: 1. Provide a wide and comprehensive understanding of the current and future heat demands and loads within Newhaven. 2. Understand whether Veolia’s EfW plant could provide the primary heat source for the development of a District Heat Network in the town. 3. Provide a high level technical and commercial assessment of the source viability and determine the potential for a heat network(s) in Newhaven. The environmental charity Bioregional is supporting Newhaven Town Council in the delivery of this project. This includes assessing tender replies, providing the go-between the Council and consultant and assisting the appointed consultants where applicable. A project board has been formed as a decision making body to overview and scrutinise the delivery of this project. Newhaven’s mantra for development is ‘Green, Clean, Marine’. A 20-year vision for Newhaven will see the number of houses in the town increase by around 40% along with the construction of new industrial, commercial and recreational facilities. Newhaven Town Council are committed to reducing area-wide carbon emissions, decreasing the number of residents living in fuel poverty and increasing energy security. This study will provide the Council and the operator of the Waste facility with the information they need to investigate development of the potential heat network in much more detail. The Authority intends to enter into a contract with the successful contractor which will remain until full and satisfactory completion of the study. The Contract will be let under the Terms and Conditions provided in the appendix. Please ensure that you have read, understand and are willing to work to these Terms and Conditions before preparing your submission. This document both sets out the statement of requirements relevant to the fulfilment of this particular contract, and the conditions for participation i.e. the minimum selection criteria for undertaking work for the Authority. Please contact Anthony Probert anthony.probert@bioregional.com for more deatil.