Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Comprehensive Land Claim Agreement: No Nature of Requirements: The Contractor must furnish all necessary tools, services and labour to execute the work required for the maintenance of the heating, ventilation, air conditioning (HVAC) equipment for Public Works and Government Services Canada located Walkley Armouries, 2100 Walkley Road, M-23, 1200 Montreal Road and National Defence Medical Centre (NDMC), 1745 Alta Vista Drive, Ottawa, Ontario, in accordance with the Statement of Work 8M3-1584-6, attached herein as Annex A. The contract will be for a period of five (5) years. Mandatory Site Visit It is mandatory that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for the Site Visit to be held at Walkley Armouries, 2100 Walkley Road, M-23, 1200 Montreal Road and National Defence Medical Centre (NDMC), 1745 Alta Vista Drive, Ottawa, Ontario on January 12, 2017. The site visit will begin at 10:00 EST, in the main entrance of Walkley Armouries. Personnel security screening is required prior to gaining authorized access to PROTECTED sites. Bidders must communicate with the Contracting Authority no later than January 5, 2017 at 16:00 EST to confirm attendance and provide the name(s) of the person(s) who will attend. The Bidders Company Security Officer (CSO) must ensure that their representatives hold a valid security clearance at the required level for the Site Visit. Failure to comply with the security requirements will result in the representative(s) being denied access to the site. Bidders will be required to sign an attendance sheet. Bidders should confirm in their bid that they have attended the Site Visit. Bidders who do not attend the mandatory Site Visit or do not send a representative will not be given an alternative appointment and their bid will be declared non-responsive. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation. It is mandatory that bidders provide and wear safety boots for the Site Visit. Bidders who do not comply will not be permitted to attend the Site Visit. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
HVAC for the replacement new construction and remodeling monastery for 92 rest homes, local service, kitchen, ...
The Network Contracting Office 22, Long Beach intends to award a firm fixed price to a Service- Disabled Veteran-Owned Small business SDVOSB. The requirement is being set-aside to SDVOSB that has been certified by VetBiz.gov The NAICS Code is 238220 and small business size is $14.0 Mil. The Contract period shall be for a base year and two option periods. The VA Greater Los Angeles Healthcare System (VAGLAHS) for a Heating, Ventilation, and Air Conditioning (HVAC) equipment and Siemens Apogee Building automation System preventive maintenance and intervening maintenance and repair services agreement (all parts, labor and travel) for all HVAC units in buildings 304, 345, 401, 402, 500, 501 & 507, Fisher House and Distant Patient Lodging at VAGLAHS. Maintenance Services includes preventative maintenance, service calls, call back service and emergency service. The Contract must provide documentation that they can maintain the installed Siemens HVAC control systems at ABC Account. Contractor must provide documentation that they can service and support specific to Siemens manufactured equipment. This equipment is very technical in nature and requires factory trained service technicians with access to technical service bulletins and system updates to ensure proper operation of the Building Automation and HVAC systems at the ABC Account. Contractor must show documentation that can provide the software support and updates, online and onsite support for emergency and non-emergency situations. Contractor must provide documentation that they can provide warranty coverage on Siemens equipment. The contract will be for a base year with two option years. Solicitation will be posted on or about 07/02/2015 with solicitation due back on or about 07/20/2015.
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Comprehensive Land Claim Agreement: No Nature of Requirements: EZ899-172069/A Yi (PWY), Patty Telephone No. - (778) 919-2578 ( ) Fax No. - (604) 775-6633 ( ) Title: HVAC Unit Replacement Location: Mission, BC Work Description: This contract covers the following work at the Mission Medium Institution in Mission, BC. Work to be performed under this Contract includes, but not limited to, the following items covered further in the Contract documents. 1. Provide a detailed work plan including a project schedule and phasing. This detailed work plan shall be submitted to the Departmental Representative for review to verify that there will be no interruption of service 2. Do not start work until all essential equipment is delivered to the site and the work can proceed without delays 3. Provide as-built drawings and closeout submittals 4. Refer to Section 01 11 00 Summary of Work Site Visit: A site visit has been scheduled for December 22, 2016 at 0930 PDST. The site visit will be at the Mission Medium Institution located at 8751 StaveLake Street, Mission, BC. Bidders are to meet at the PWGSC Trailer to sign in for the site visit. Bidders are reminded to wear high visual vests to the site visit. Completion Date: Commence work immediately upon notification of acceptance of offer and complete the work within sixteen (16) weeks from the date of such notification. Inquiries: Patty Yi, Supply Specialist Tel: (778) 919-2578 Fax: (604) 775-6633 Email: email@example.com Value of Project: To assist with bonding and insurance requirements, this project is estimated to cost between $100,000.00 to $200,000.00. Firms intending to submit proposals on this project should obtain tender (solicitation) documents through Buyandsell.gc.ca/tenders. Addenda, when issued will be available from Buyandsell.gc.ca/tenders. Firms that elect to base their proposals on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid. This procurement office provides procurement services to the public in English. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
The new Bodø Town Hall is a project in down town Bodø. The building shall be constructed in the quarter bordered by Kongens gate, Torvgata, Dronnings gata and Havnegata. The current town hall, the Norges Bank building and the previous Bodø library are located/were located in the same block.
The New Bodø Town Hall will consist of a new building (New Building) as well as the existing town hall (Town Hall) and Norges Bank's building (the Bank).
The new building will connect all the buildings together to 1 unit. The Town Hall and the Bank shall be completely renovated.
The new town hall shall function as an office building for Bodø municipality's administration and, in addition, cover the necessary functions for political work, with offices and meeting rooms for political parties.
The existing town council room, municipal executive board room and a meeting room called ‘Blåsalen’ shall be kept in the original style as much as possible, but technically upgraded. The rooms are listed and compliance with these requirements is required.
The office area for Bodø municipality's administration is mostly open plan with many ‘small rooms’ for protected work and a relatively large number of meeting rooms.
The entrance on the ground floor is a large reception area for enquiries from the municipality's citizens, with rooms for meetings and guidance as required.
On the 5th floor there is a canteen and meeting room.
This contract is for contract K301 HVAC and sanitation installations. This includes all such installations, such as sanitary installations, heating installations, cooling installations, air treatment, sprinkler installations etc. Tenders shall be submitted for all HVAC and sanitation installations and work connected to this as described and referred to in the subsequent chapter.
The descriptions are divided into separate documents on the work in question, depending on the type of work and deliveries that shall be carried out or delivered, but which are included in the same contract, K301.
— K301 Book 1 General part;
— K301.1 Contract description.
The contract requires good cooperation with other technical contracts, particularly the Automation and Electro disciplines. This contract shall deliver equipment that other contracts shall connect to, commission and function test, as well as assemble equipment that other contracts deliver.
All communication and documentation shall be in Norwegian.
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Comprehensive Land Claim Agreement: No Nature of Requirements: CCGS DES GROSEILLIERS HVAC F3017-16N520/A Gagnon, Mathieu N° de telephone - (418) 649-2883 ( ) Nº fax - (418) 648-2209 Email: firstname.lastname@example.org NOTICE: The sourcing strategy relating to this procurement will be limited to suppliers in the area of origin (Eastern Canada) of the vessel in accordance with the Shipbuilding and Repair Procurement Policy. Description To carry out the ship repair work regarding the Canadian Coast Guard Ships (C.C.G.S.)Des Groseilliers, during the summer layout at Queen Wharf of the Port of Quebec, Quebec (QC), in accordance with the Technical Specifications entitled ; F3017-16IN520 9200 HVAC ENv4 and all related drawings and other technical documents. BIDDERS CONFERENCE (OPTIONAL): A bidders' Conference chaired by the Contracting Authority will be convened on board vessel CCGS Des Groseilliers at 9:30 am, December 15th, 2016. The ship will be at 101 Champlain Blvd, Quebec. An attendance confirmation is required before 11:00am, December 13th, 2016. VESSELS VIEWING (OPTIONAL): A site visit of the CCGS Des Groseilliers will be held immediately after the bidders conference. Particulars of the vessel: Name: CCGS Des Groseilliers Principal Dimensions: Length overall: 98.2 meters Breadth moulded: 20.7 meters Maximum draught: 7.4 meters Load displacement: 8 415 English Tons Minimum draft, forward: 5.6 meters Minimum draft, stern: 6.4 meters Installation work is to commence and to be completed during the Work Period as follows: NGCC Des Groseilliers: Start of work: April 17th 2017 End of work: December 18th, 2017 NGCC Amundsen: Start of work: 6 weeks after order of the option End of work: 8 weeks after start of work This Public Works and Government Services Canada office provides procurement services in both official languages of Canada Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
AG-9AB5-S-17-0014 Following is summarization of the full solicitation pending. NOTE: there are training requirements for employees as well as mandatory response times for service calls that must be met. A site visit will be held; attendance is mandatory in order to have an acceptable bid. Period of Performance: 01 April 2017 to 31 March 2018.Four (4) one-year options will be structured into the contract. SCOPE OF WORK. The contractor shall provide all personnel, equipment, materials, tools, supervision, facilities, and transportation necessary to perform Heating, Venting and Air Conditioning (HVAC) maintenance and on site emergency repair for all HVAC equipment, including chemical treatment for heating and cooling systems as defined in this Statement of Work (SOW) and as listed in Appendix I - Equipment Listing, for the Headquarters, San Bernadino National Forest Supervisor's Office, 602 S. Tippecanoe Street, San Bernardino, CA 92408. Routine maintenance is on a biweekly/monthly schedule. Contractor must be able to provide response times as follows: A. One (1) Hour Response Time - Normal Working Hours. Emergency Service Call request placed during the hours of 8:00 AM and 5:00 PM, Monday through Friday. B. Two (2) Hour Response Time - After Hours. Emergency Service Call request placed during the hours of 5:00 PM through 8:00AM, Monday through Thursday. C. Three (3) Hour Response Time - Weekend and Holidays. Emergency Service Call request placed during the hours of 5:00PM Friday through 8:00 AM Monday, and Holidays. The Contractor shall supply, repair and replace all parts of every description made necessary by normal wear and tear. All replacement parts shall be those of the original manufacturer, equal or better, and shall fit the equipment without modification. The contractor shall have and maintain on hand locally, a supply of the repair parts sufficient for the normal maintenance and repair of the chiller systems. The Government will pay the Contractor to replace the inventory for the parts used, but no additional reimbursement will be made for labor to replace normal wear and tear parts. Accompanying the signed service ticket, the contractor shall provide the COR with a copy of the invoice showing the costs of the parts excluding any taxes that contractor paid its part supplier. The Government reserves the right to limit reimbursement to fair and reasonable part charges. EQUIPMENT INCLUDED. The specific quantities, size and model number of the major pieces of the equipment are as show on Appendix I - Equipment Listing. The preventive maintenance and responsibility of the Contractor shall not be limited only to these major pieces of equipment, but shall also include all appurtenance devices and systems as listed below that are related to the heating, ventilation, and air conditioning system. • Temperature Control System: Carrier Controls Energy Management system consisting of Control Panel, 6400 Controllers, VAV TRM Controllers with Hot Water Reheat, VAV Fan Controllers with Electric Reheat. Variable Frequency Drives, Temperature & Pressure Sensors, etc... • Heating System: Boilers, burners, pumps heating coils, water strainer, heating exchangers, hot water loop strainers & zone reheat vent screens for boilers, etc. • Air Handling System: Fans, motors, air grills, plenums, registers, air filters, dampers, VAV boxes, VFD's fan coils units, etc. • Cooling System: Air conditioning and refrigeration compressor(s), air cooled condensers, cooling towers, cooling tower fans, pumps, water chillers, cooling coils, water side economizer, etc. EQUIPMENT NOT INCLUDED A. Maintenance services, including repair labor and parts replacements, for portions of the system and equipment that are non-moving are not required nor included as part of this specification. Excluded items shall be considered as: foundations, structural supports, domestic waterlines, drains, plumbing, oil lines, gas lines, piping oil storage tanks, air handling duct work, boiler shell and tubes, unit cabinets, boiler trim and refractory material, cooling tower structures, etc. CERTIFICATIONS AND STANDARDS The Contractor shall be experienced in and currently engaged in design/build projects of HVAC systems. The Contractor or subcontractor personnel performing the work shall have minimum of five years' experience on maintenance of the specific HVAC components. The importance of maintaining this equipment in a safe and satisfactory operating condition requires that the service personnel have the necessary training and experience. Proof of this experience and training shall be provided to the Contracting Officer's Representative (COR). Personnel offered as Service technicians must be ‘factory-trained', i.e. formally certified by both Carrier and York (Johnson Controls). York International is the prime manufacturer of SBNF critical HVAC equipment on-onsite. Carrier is the manufacturer I-VU Front End Graphics, equipment and software. Therefore, Contractor shall follow specifications, guidelines and procedures recommended by Carrier; only Contractors that have been factory trained and certified by Carrier to operate this software/system will be authorized entry, or allowed to make changes to, the software system. Contractor shall also adhere to services procedures, timelines and general industry standards set forth by manufacturers of other HVAC equipment in use. Acceptability of the OfferAn offer is acceptable when it manifests the offeror's assent, without exception, to the terms and conditions of the RFP, including attachments. If an offeror takes an exception to any of the terms and conditions of the RFP, then the Government will consider its offer to be unacceptable. Capability of the OfferorThe Government will assess the capability of each offeror on the basis of the following criteria which are of approximately equal value: (1) Past Performance; (2) Technical Approach; (3) Past Experience. Technical Proposal - Include the following elements: 1. Past Performance. Past performance is a measure of the degree to which an offeror satisfied its customers in the past and complied with Federal, State and Local laws and regulations. Provide details on quality of work performed on all similar contracts within the past 5 years. Identify the projects you have successfully completed that you consider offers evidence that proves your firm has the experience required to complete this project. List similar projects from the last 5 years with client points of contact with appropriate contact information for the purposes of past performance checks. Discuss business performance statement that describes relationships and cooperation with customers. Include any investigation of alleged or actual violations of labor or immigration laws committed by your firm within the past three years and the disposition of those cases. 2. Technical Approach Understanding of the Government's Requirements. The Government will evaluate each offeror's relative understanding of the Government's requirements on the basis of its written submittals addressing the following subfactors: a) Any information that indicates the extent to which the site for this project was visited. Prospective bidders are advised that attendance at the pre-bid tour is Mandatory to be considered for award of this contract. State the name of the Contractor's representative who attended the pre-bid tour, any revelations about the comparative difficulty of the project, and any problems that are likely to be encountered during the performance of the work. b) The resources (personnel, equipment and subcontractors) which are planned for use on the project, and how realistic that plan is given concurrent obligations. Provide copies of Contractor or subcontractor certifications and licenses required to perform the work described as found in the Statement of Work. c) Plan of work: Provide a detailed Work Plan describing how you plan to accomplish the work. Include a Work Schedule that shows your ability to accomplish the project work within the required timeframe. Quality Control Plan. The proposal shall include the offeror's Quality Control Plan which identifies specific quality control procedures that will be followed. Discuss techniques that your firm will use to ensure that the quality control procedures are followed by your superintendent, results communicated to your crew and subcontractors, and methods to mitigate any potential problems. 3. Past Experience. Describe experience performing similar requirements during the past 5 years. Describe experience working with equipment of similar size and complexity including but not limited to boilers, chillers, cooling towers, air handlers, water side economizers, and energy management systems. Describe your experience working with equipment from the relevant manufacturers: York and Carrier. Provide proof of relevant experience or training for the personnel who will perform the contract work. The Contractor or subcontractor personnel performing the work shall have a minimum of five years' experience working with the specific HVAC components described in the Statement of Work. Include accurate information that will allow the evaluators to contact contract administrators involved with the referenced work. Names, phone numbers, dates, locations, type of work, etc. are critical. Specifically identify a project manager that you will provide for the performance of this contract as a Key Personnel. Provide detailed information about his/her experience. Describe what work you will directly perform and what work will be performed by a subcontractor. Provide sufficient information so that the evaluators may make contact with anyone who can verify these experiences. 4. Price Proposal. The price proposal should consist of itemized pricing as listed in the Schedule of Items. Award may not necessarily be made to the offeror submitting the lowest offer. Also, the award may not be made for technical capabilities that would appear to exceed those needed for successful performance of the work. The Government reserves the right to make cost/technical trade-offs that are in the best interest of the Government. It is anticipated that the award will be made to the firm with the best value, considering price, technical proposal, and technical capabilities.
The United Nations Economic and Social Commission for Asia and the Pacific (UNESCAP) intends to replace the existing Air Handling Units within the United Nations Conference Centre (UNCC), which is located at the UNESCAP Complex on Rajadamnern Nok Avenue, Bangkok, Thailand. This is the general requirement for the first phase of the work associated with the refurbishment of the entire UNCC HVAC System. The scope of works will include, but not be limited to, the following: 1.1 Removal and disposal of the old Air Handling Units (AH XXX) 1.2 Supply and installation of a new Air Handling Unit (AHU) and associated items: 1.3 Two-Way Electronic Pressure Independent Control Valve (PICV): 1.4 Manual Shut-off valves. 1.5 Chilled water supply strainers. 1.6 Drain valves and pipe connection to the existing drain channel. 1.7 Differential Pressure Switches for filter clog indication. 1.8 Liquid-filled pressure indicator for filter differential pressure 1.9 Electric current detector switch for supply and return fan status feedback. 1.10 AHU with suffix ‘-n’ do not have a return air fan, refer table in section 1.3. 1.11 Thermometers and pressure gauges at inlet and outlet water pipes 1.12 Pipe connection to the existing main pipe, insulation and accessories 1.13 Motorized fresh air damper with electric 24 VAC floating control motor actuator for the fresh air damper. Adjustable travel range, position indicator, automatic end stops, manual gear release. Including wiring and connection to the existing BAS control panel. 1.14 Carbon Dioxide (CO2) Return Air Transmitter. To be duct mounted, with adaptor and mounting flange. Range 0 to 2,000 ppm CO2. Accuracy at 25°C: +/-30 ppm. Non-linearity < 0.5% of Full Scale. Long term stability: < ±5.0% of Full Scale over 5 Years. Response Time (0 to 63%) of 1 minute. Transmitter Output Signal: 0 to 10VDC. Power Supply: 24 VAC (18 to 30 VDC), Class 2. Warm Up time: < 5 minutes. Air Flow Range: 0 to 38 m/s (0 to 7,500 ft./min). Duct probe material: Duct Probe Meets Plenum Rating Requirements of UL 1995, Heating and Cooling Equipment. Including wiring and connection to the existing BAS control panel. 1.15 Motor electrical power connection to existing board. 1.16 All control, monitoring and signal wiring to be installed in new metal conduit and connected to the existing BAS Controller panel, including junction boxes and all accessories. 1.17 Testing and commissioning of all items and setting into operation. Companies that wish to bid, please response to the above email address with EOI reference number.
Bodø kommune, (the Contracting Authority), hereby invites tenderers to an open tender competition on construction management for the new Town Hall in Bodø.
The new Bodø Town Hall is a project in down town Bodø. The building shall be constructed in the quarter bordered by Kongens gate, Torvgata, Dronnings gata and Havnegata. The current Town Hall, Norges Bank building [Bank of Norway Building] and the old library are all currently located in the same quarter.
The existing Town Hall building and Norges Bank building shall remain unchanged on the visible facades, but shall be completely renovated internally.
The old library has been demolished.
A new six storey building will be constructed that fills the site where the old library was as well as other areas integrating the Norges Bank Building and the existing Town Hall in a combined new Town Hall building.
Public outdoor areas will be included in the block.
The tender shall include complete performance as a construction manager for HVAC and sanitary installation disciplines, progress planning, reporting to the project management and general organisation in assisting the Contractor in an optimal execution of the construction project.
A project hotel shall be continually and actively used and for all documentation in the project. The project hotel is administered by the builder. Contractors should obtain documentation and drawings from the project hotel and arrange their own copying as needed. The same applies to construction management.
The Contractors and construction management shall actively participate in planning of progress to ensure optimal execution and obligatory organisation of the construction project. Construction management shall actively participate in the progress planning work and commit to actively assist to ensure completion of the activities to an agreed time and within the economic limits applicable at any given time.
The Construction Manager (CM) shall execute complete management of work connected to the HVAC and sanitary installation contract and co-ordination with other contracts and other construction managers for other disciplines. Important elements in this work will be:
— Actively participate in progress planning for optimal execution, staffing and resource management and collaborate loyally with project management (BL), Engineering Design Manager (PRL) and progress planner (FPL) to find the best solutions for the Contracting Authority/Contractor (BH).
— Actively follow up the contractors and find good solutions in agreements for progress and economic limits.
— Write minutes from construction meetings and follow up the items for quick, consecutive clarification of these.
— Report to the project management continuously and in the manner agreed to after contracting.
— Actively use the project hotel for all documentation and drawing exchange.
— Receive and process changes that come from contractors to ensure good and professionally solid, reasoned choices and decisions on these in collaboration with the Contractor and project management
— Assistance with the execution of commissioning, tests and hand-over of all contract works to the Contractor.
— Assistance with the preparation of the final settlement.
The Contract K301 HVAC includes all HVAC and sanitary technical installations for heating, ventilation, sprinkler system and plumbing installations, Water and Sewage, etc. The HVAC and sanitary installation contractor must co-operate closely with the electro contractor and the automation contractor. This also applies to construction managers for these disciplines.
The Construction Manager must work closely with other construction managers, PL, PRL and FPL and contractors and it is assumed that the construction manager will have good communications skills and have a solutions focussed way of working.
The BL assignment requires that there is no dependency or connections between the person who has the role of BL and the contractors or suppliers.
All documentation and communication shall be in Norwegian.
Cleaning of HVAC air ducts for the great review of railcars AR 41
The FAA is seeking to obtain information from offerors to provide HVAC maintenance at our Kona and Hilo facilities. The set-aside for this requirement has not been established. This is a market survey to determine available contractors and the business size of the contractor. The North American Industry Classification System (NAICS) code is 238220 PLUMBING, HEATING, AND AIR-CONTITIONING CONTRACTOR, with a Small Business Size Standard of $15 MILLION. ANY QUESTIONS REGARDING THIS ANNOUNCEMENT MUST BE RECEIVED BY FAA Contracting Specialist, Bipan Sandhu, AT email@example.com PRIOR TO 5:00 p.m. PST, Tuesday, January 17, 2017, FOR ANSWERS TO BE PROVIDED BEFORE THE SOLICITATION IS SENT OUT. Contractors must be registered with the System for Award Management, www.sam.gov prior to contract award. Reference AMS Clause 3.3.1-33, paragraph (d), “if the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered Offeror.” E-mail responses with interest must be received electronically by the FAA Contracting Specialist, Bipan Sandhu, at firstname.lastname@example.org by 5:00 p.m. PST, Thursday, January 19, 2017. Any responses received after 5:00 p.m. PST, January 19, 2017, will not be considered in accordance with AMS provision 126.96.36.199-14, Late Submissions, Modifications, and Withdrawals of Submittals. If all requested information is not furnished, the vendor's response may be determined ineligible. Potential offerors should note that the FAA reserves the right to communicate with one or more offerors at any time during the ANNOUNCEMENT process. This ANNOUNCEMENT is not to be construed as a contract or a commitment of any kind. The Government shall not be liable for payment of any costs attributed to the preparation and submission of proposals. If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/26078 to view the original announcement.
interiors RC Gouy: HVAC - Sanitaryware - Tiles
Provide electrical and HVAC upgrade in accordance with attached specifications (to be posted within 15 days of this announcement). The estimated price range is between $1,000,000 and $5,000,000.
Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Comprehensive Land Claim Agreement: No Nature of Requirements: Requirement To provide all maintenance services on heating, ventilation, air conditioning (HVAC) and related mechanical equipment at the Embassy of Canada in Port-au-Prince, Haiti, in accordance with the Statement of Work 8M3-6012-5 attached herein as Annex A. Bidders' Conference - A bidders' conference will be held at PWGSC, Portage III, 11 Laurier Street, Gatineau QC K1A 0S5 on 2017-01-11. The conference will begin at 10:00 am EST, in 12C1-101A. The scope of the requirement outlined in the bid solicitation will be reviewed during the conference and questions will be answered. - It is recommended that bidders who intend to submit a bid attend or send a representative. - Bidders are requested to communicate with the Contracting Authority before the conference to confirm attendance. Bidders should provide, in writing, to the Contracting Authority, the name(s) of the person(s) who will be attending and a list of issues they wish to table no later than 2017-01-06 at 03:00 pm EST. - Bidders thatare unable to attend in person can join the conference via the Government of Canada Teleconference Service - Webex. Participants joining by means of Webex will be able to view the presentation material on their computer as well as listen to the presenters in either English or French through their telephone line. Bidders are requested to register with the Contracting Authority before the conference to confirm attendance via Webex. The individuals named by the Bidders will receive an email invitation by the Contracting Authority, which will include a link and a password to access the conference as well as the teleconference numbers. All Webex participants will be required to transcribe any and all of their questions through the chat feature to allow PWGSC to monitor and batch similar questions to be addressed during Question Period, following the presentation. - Bidders are requested to specify in their list of participants (in-person and WebEx), the type of assistance PWGSC should provide to accommodate persons with visual, hearing or any other disabilities. - Any clarifications or changes to the bid solicitation resulting from the bidders' conference will be included as an amendment to the bid solicitation. - Bidders who do not attend will not be precluded from submitting a bid. Period of the Contract The contract will be for a period of one (1) year with four (4) additional option periods of one year each. Security Requirement Before award of a contract, the following conditions must be met: -The Contractor must, at all times during the performance of the Contract, hold a valid Designated Organization Screening (DOS), issued by the Canadian Industrial Security Directorate (CISD), Public Works and Government Services Canada (PWGSC). -The Contractor personnel requiring access to sensitive work site(s) must EACH hold a valid RELIABILITY STATUS, granted or approved by CISD/PWGSC. -Subcontracts which contain security requirements are NOT to be awarded without the prior written permission of CISD/PWGSC. Basis of Selection The Crown will issue a contract to the Bidder meeting all mandatory criteria and with the lowest evaluated price. Enquiries All enquiries regarding this requirement must be submitted in writing to the Contracting Authority: Hakim, Ghoumrassi E-mail - email@example.com Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
Bid for the work of HVAC and sanitary facilities for the project in 2346 - Construction of 5 residences Alferweiher Echternach.
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quote are being requested: (ii) This solicitation, FA4613-17-T-0003, is issued as a request for quotation (RFQ). (iii) This RFQ incorporates provisions and clauses are those in effect through (FAC) 2005-91 effective 30-Sep-16. (iv) This RFQ is set-aside for small business associated with NAICS code 561790 and small business size standard is $7.5M. (v) See attached SF 1449 (see Contract Line Item Number (CLIN) 0001). (vi) The Contractor shall be responsible for furnishing all labor, materials, equipment and services necessary in cleaning the HVAC ducting at 15 Missile Alert Facilities (MAFs) located in Wyoming, Nebraska and Colorado. The work includes cleaning HVAC ducts at fifteen MAFs along with incidental related work. The MAFs are secure sites and are to remain operational during the commencement of the work (See attached Statement of Work). (vii) The Contractor shall submit a work schedule to Missile Engineering for approval within 15 days after award of the contract. See attached Statement of Work, para 3.7. Place(s) of delivery: See attached Statement of Work, para 2. Acceptance and FOB point: Government. (viii) This RFQ includes provision FAR 52.212-1, Instructions to Offerors -- Commercial. (ix) EVALUATION CRITERIA: Award decision will be based upon the offer representing the best value to the government considering the following factors: Lowest PriceTechnically Acceptable (LPTA) and the technical factors are listed in the attached SF 1449 on the continuation sheet under Certification. (x) All offerors shall include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items, with its offer. (xi) The clause at FAR 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. (xii) The clause at FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. See attached SF 1449. (xiii) Additional contract requirements are listed in the attached SF 1449. (xv) All quotes are due on Monday, 23 January 2017, 1600 MDT to Wesley Marcik via email firstname.lastname@example.org, and cc' Melissa Battiste, email@example.com. (xvi) Contact Wesley Marcik at 307-773-6623 for information regarding the this RFQ or Melissa Battiste at 307-773-4650. Offerors must ensure that their company is registered with System for Award Management (SAM) prior to award. For information refer to: https://www.sam.gov/portal/public/SAM/.Request for Building Drawings: The building drawings are considered DoD Unclassified Controlled Nuclear Information (UCNI) and offerors shall request access to the information. Please provide a request to Wesley Marcik and Melissa Battiste via email firstname.lastname@example.org and email@example.com by 1300 Monday 16 January 2017 MDT.
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Comprehensive Land Claim Agreement: No Nature of Requirements: F1700-166206/A Siopongco, Philip (PWY) Telephone No. - (604) 351-6139 Email: Philip.Siopongco@pwgsc.gc.ca Title HVAC Upgrade, Cultus Lake Laboratory Department of Fisheries and Oceans Location Cultus Lake Laboratory, British Columbia Note to Tenderers Drawings and Specifications are now available for viewing and downloading in a Portable Document Format (PDF) or in a standard paper version. Tenderers should note that Attachment File(s) contain the Drawings and Specifications Package (DSP) which consists of PDF files organized in an industry recognized directory structure. Work Description Department of Fisheries and Oceans though Public Works and Government Services Canada (PWGSC) has a requirement for the replacement of two (2) air-conditioning units, the addition an exhaust fan and relief opening plus upgrades to the mechanical and control systems in the DFO Laboratory building located in Cultus Lake, British Columbia The Scope of Work includes but is not limited to the following items: Remove two, existing split system air conditioning units, BCU-1 and 2; Remove/recycle all refrigerant from equipment before removing equipment; Provide new split system heat pumps; HP1 and HP2 (indoor and outdoor units); Modify ductwork as indicated in the drawings; Relocate existing louvre and provide new intake louver as indicated on the drawings.; Provide new exhaust fan, EF-101; Provide penetrations, opening framework, flashing and sealing work to prepare andmake good any penetrations/attachments in/on exterior walls; Provide new temperature sensors, thermostats, dampers, actuators and controllers as indicated in the drawings; Provide a new digital controls system, as specified, to control the new and existing HVAC Equipment as indicated; Provide controls for existing boiler, primary, secondary and reheat coil circulation pumps, control valves and operational status of the three existing fume hoods; Provide hot water control valves and room temperature sensors where indicated on the drawings; Conduct an air balance of the air handling systems; Conduct cleaning and testing of new piping systems; Conduct cleaning of new and existing ductwork; Provide Electrical work associated with the upgrade of the mechanical systems; Commission all equipment and provide commissioning reports for all equipment and systems supplied under this contract; Provide Operating and Maintenance Manuals and As-Built Drawings; and Provide on-site training for the Operations staff. Provide 1 year parts and labour warranty. Work will be performed in accordance with the contract schedules within the scope of work. Optional Site Visit Interested bidders are encouraged to preview the site prior to submitting a tender for this work and to make inquiries or investigations necessary to become thoroughly acquainted with the site as well as the nature and extent of the work. An optional site visit is scheduled on Monday, January 23, 2017 at 11:00 a.m. Attendees are requested to be at the main entrance to the facility, 15 minutes prior to the start of the site visit. Delivery Date The work shall commence immediately upon official notification of acceptance of the tender by the Contracting Authority. Substantial construction is to be completed by May 31, 2017 and all construction and deficiency follow-up work completed by June 30, 2017. Bidders are responsible for making their own travel arrangements. Enquiries Philip Siopongco, A/Supply Specialist Tel: (604) 351-6139 Fax: (604) 775-6633 Email: Philip.Siopongco@pwgsc.gc.ca Value of Project To assist with bonding and insurance requirements, the work is estimated to cost around $145,000.00 Firms intending to submittenders on this project should obtain tender (solicitation) documents through Buyandsell.gc.ca/tenders. Addenda, when issued will be available from Buyandsell.gc.ca/tenders. Firms that elect to base their bids on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid. In all cases, bidders must indicate (when requested) in the space provided on the tender form the identification number(s)of the addenda, if any, that they have taken into consideration for their bid. This procurement office provides procurement services to the public in English. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.