Call +44 800 9755 164

Public tenders for industrial in Budapest Hungary

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!

Industrial machinery

Moholy-Nagy Művészeti Egyetem | Published December 30, 2016  -  Deadline February 27, 2017

A Moholy-Nagy Művészeti Egyetem (MOME) Campus-fejlesztés beruházás keretében megvalósuló „Műhelyház” technológiai gépeinek beszerzése -3 rész.

A jelen közbeszerzési eljárás 1. részének tárgya a „MOME Campus – Kreatív Innovációs és Tudáspark kialakítása” beruházás II. ütemében megvalósult Műhelyházhoz kapcsolódó faipari gépek beszerzése adásvételi szerződés keretében.

Gépi asztalos műhely (P20):

— 1 db vastagsági gyalu,

— 1 db körfűrész/maró és tartozékai,

— 1 db hosszlyukfúró és tartozékai,

— 1 db oszlopos fúró és tartozékai,

— 1 db kontakt csiszológép,

— 1 db korongcsiszoló,

— 1 db kis gyalugép,

— 1 db esztergagép,

— 1 db általános köszörű és tartozéka,

— 1 db mobil kompresszor.

Kézi asztalos műhely (P21):

— 1 db kis körfűrész,

— 1 db dobcsiszoló és tartozékai,

— 1 db lomb fűrészgép és tartozékai,

— 1 db kombinált csiszológép,

— 1 db asztali fúró,

— 1 db vizes köszörű és tartozéka.

Gépi modellező műhely 2 (poros) 006:

— 1 db állványos fúrógép,

— 1 db korongcsiszoló,

— 1 db szalagcsiszoló,

— 1 db körfűrész,

— 3 db mobil elszívó.

Kézi modellező műhely 007:

— 1 db élhajlító kézi,

— 1 db szerszám élező és tartozékai,

— 1 db csiszoló asztal,

— 1 db mobil elszívó.

A kapcsolódó szolgáltatások felsorolását, a közbeszerzés teljes mennyiségét és a közbeszerzés tárgyára vonatkozó részletes információkat a közbeszerzési dokumentumok tartalmazzák.

Az egyes áruk szállítási határidejét szintén a közbeszerzési dokumentumok tartalmazzák.

A jelen közbeszerzési eljárás 2. részének tárgya a „MOME Campus – Kreatív Innovációs és Tudáspark kialakítása” beruházás II. ütemében megvalósult Műhelyházhoz kapcsolódó fémipari gépek beszerzése adásvételi szerződés keretében.

Gépi modellező műhely:

— 1 db Esztergagép,

— 1 db Egyetemes marógép,

— 1 db Oszlopos fúrógép.

Anyagelőkészítő műhely:

— 1 db Zománc kemence asztali,

— 1 db Vegyi fülke.

Polírozó műhely:

— 1 db Kéttengelyes polírozó gép/asztali két munkahelyes,

— 1 db Szalagfűrész gép/állványos,

— 1 db Homokfújó gép/asztali,

— 1 db Dobsájer gép/asztali.

Kézi fémműves műhely:

— 1 db Kézi drót és lemezhenger/állványos,

— 1 db Preciziós fúrógép/asztali,

— 1 db Lézerhegesztő gép asztali,

— 10 db Flexibilis tengelyű mikromotor/set,

— 16 db Asztali lámpa,

— 1 db Gyűrűpumpa asztali,

— 1 db Formavas készlet,

— 1 db Lapkivágó készlet (Durston tárcsakivágó 3-19, 1202 vagy azzal egyenértékű),

— 1 db Lapkivágó készlet (Durston tárcsakivágó 20-28 1203 vagy azzal egyenértékű),

— 1 db Lapkivágó készlet (Durston tárcsakivágó 29-34, 1204 vagy azzal egyenértékű),

— 1 db Ékszerészmérleg,

— 1 db Pneumatikus véső/gravírozó.

A kapcsolódó szolgáltatások felsorolását, a közbeszerzés teljes mennyiségét és a közbeszerzés tárgyára vonatkozó részletes információkat a közbeszerzési dokumentumok tartalmazzák.

Az egyes áruk szállítási határidejét szintén a közbeszerzési dokumentumok tartalmazzák.

A jelen közbeszerzési eljárás 3. részének tárgya a „MOME Campus – Kreatív Innovációs és Tudáspark kialakítása” beruházás II. ütemében megvalósult Műhelyházhoz kapcsolódó textilipari gépek beszerzése adásvételi szerződés keretében.

Bőrműhely:

— 1 db Cikk-cakk bőripari varrógép,

— 1 db Karos bőripari varrógép,

— 1 db Oszlopos bőripari varrógép,

— 1 db Serfelő,

— 1 db Csíkvágó,

— 1 db Cipőipari csiszoló gép.

Textilruha műhely 204:

— 15 db Ipari gyorsvarrógép,

— 1 db Ipari cikkcakk varrógép,

— 3 db Ipari interlock 4 szálas,

— 1 db Ipari micro-interlock,

— 1 db 5 szálas fedőzőgép,

— 1 db 3 vagy 4 szálas fedőzőgép,

— 1 db Hőprés,

— 3 db Ipari gőzvasaló. Ipari gőzfejlesztővel, vasalóasztallal és kiegészítő párnákkal,

— 30 db Szabászbaba.

Textilruha műhely 205:

— 3 db Elektronikus vezérlésű szövőszék,

— 8 db Asztali szövőszék.

A kapcsolódó szolgáltatások felsorolását, a közbeszerzés teljes mennyiségét és a közbeszerzés tárgyára vonatkozó részletes információkat a közbeszerzési dokumentumok tartalmazzák.

Az egyes áruk szállítási határidejét szintén a közbeszerzési dokumentumok tartalmazzák.

Engineering services

NIF Zrt. | Published January 10, 2017  -  Deadline January 26, 2017

IKOP agency contract 'No. 62. section of the main road is needed supply Szabadegyháza-industrial plant for bypass construction works of engineering tasks "in the subject.

Road-maintenance equipment

Magyar Közút Nonprofit Zrt. | Published December 17, 2016  -  Deadline January 26, 2017

Part 10 as follows.

Part 1: 61 pieces Powered Chainsaw "33 cm".

Part 2: 3 Powered Chainsaw "50 cm".

Part 3: 20 Powered Chainsaw "60 cm".

Part 4: 358 Moto undergrowth cleaning mower.

Part 5: 5 Moto hedge clippers.

Part 6: 9 Powered handheld blower motor.

Part 7: 19 pcs high-altitude loppers.

Section 8: 2 Motorised knapsack sprayer.

Part 9: 12 pieces of hand-led, self-propelled lawn mower engine.

Part 10: Manual 3 drill motor.

The main technical requirements:

50 cm³,

2.1 kW / 2.72 hp,

5.0 kg,

33 cm,

- The tool grip to be damped,

120 dB (A).

Other components:

- Side chain tensioner.

The device is supplied for industrial design and is suitable for industrial use.

The main technical requirements:

70 cm³,

4.0 kW / 5.4 hp,

7.0 kg

50 cm,

- The tool grip to be damped,

120 dB (A).

Other components:

- Side chain tensioner,

- Decompression valve.

The device is supplied for industrial design and is suitable for industrial use.

The main technical requirements:

80 cm³,

4.8 kW / 6.5 hp,

9.0 kg

60 cm

- The tool grip to be damped,

120 dB (A).

Other components:

- Side chain tensioner,

- Decompression valve.

The device is supplied for industrial design and is suitable for industrial use.

The woody plants trident steel cutting discs, while the herbaceous plants are semi-automatic feed-head fishing line cutting head chopped or cut the head To convert.

The device is supplied for industrial design and is suitable for industrial use.

The main technical requirements:

45 cm³,

1.9 kW / 2.5 hp,

9 kg,

1850 mm

120 dB (A).

Other Requirements:

- Factory-carrier system that the device is easy to carry all day at work makes it easy and convenient, provides uniform load distribution.

Other accessories factory:

- Three-pointed knife,

- Semi-automatic string head,

200 mm circular saw blades, a guard relatives.

Performance depends on the area to be cut on the characteristics of plants (woody or herbaceous) and weight.

The main application of the highways in the separation zone of vegetation, hedges professional cutting machine, improperly cut plant stems after-align.

The main technical requirements:

- Operation: internal combustion gasoline engine,

22 cm³,

0.67 kW / 0.91 hp,

70 cm,

- Cutting mechanism: reciprocating knives,

6 kg

120 dB (A).

Other requirements:

- The machine has protection against vibration nuisance.

Other equipment:

The supplied protective equipment must be presented in detail because of the preparation of the bid.

8-10% price összeaprítja.

The main technical requirements:

25 cm³,

0.7 kW / 1 hp,

710 m³ / h,

6 kg

- Can be used as a blowing machine.

Other equipment:

- Electronic ignition,

- Have gyűjtőzsákkal,

- Ergonomic carrying handle,

- Carrying strap,

- Round and flat nozzle head.

Other Requirements:

- The machine has anti-vibration system.

Professional machine has high range that wood products professionally and economically, while standing on the ground can be carried out.

The main technical requirements:

- Displacement: 25 cm³ min,

0.7 kW / 0.95 hp,

8.5 kg

25 cm

3800 mm.

Other Requirements:

- Factory shoulder strap / hordozóhevederrel have,

- Cutting inventory to professional-quality,

- The machine has anti-vibration system

- Telescopic handle.

Other equipment:

The supplied protective equipment must be presented in detail because of the preparation of the bid.

The device megajánlandó professional design, high range has to plant protection, maintenance economically, due védőtávolságból can be carried out.

The main technical requirements:

50 cm³,

1100 m³ / h

12 liters

12 m

14 kg,

120 dB (A).

Other Requirements:

- Hordozóhevederrel have a factory,

2 different grating factory,

- The machine has anti-vibration system.

The megajánlandó for professional design with high workloads, rugged but easy to use self-propelled machine is.

Be retrofitted to mulching mode option is to cut the grass.

The main technical requirements:

2.6 kW / 3.5 hp,

60 liters

50 cm,

be between 70 mm - 30

- Working speed 0 - 5,5 km / h,

50 kg.

Other Requirements:

- Animals can handle heights,

- The engine suspension, anti vibration rezgéscsillapítású be,

- Mulching function to have,

- Multi-blade,

- centrifugal

Motor vehicles

BM Országos Katasztrófavédelmi Főigazgatóság | Published December 30, 2016  -  Deadline February 17, 2017

Purchase contract ", according to the state norm of category 3 (passenger cars lower-medium category) Purchase of wagon design cars to perform the chimney industrial activity" in the subject.

8) NFM directed in Category 3. 42 (standard quantity) + 10 (option) purchase of combined passenger vehicle designed to carry a chimney industrial activity.

The transfer to the buyer at a total of 50 km of the time between no more mileage, as well as the manufacture and the date of placing into service is not more than 180 calendar days.

The cars Hungary applies the technical examination, the origin examination, registration certificate, vehicle pedigree, environmental data plate, license plate and standard ,, H 'contracting mounted issued shall be issued to the name of the letter' indicating the state on the other.

to the contracting authority is sufficient if the bidder shows the type approval certificate of the content is equivalent to the European Union if the GTI in connection with the entry into accepting the document.

All the offered cars must be designed in left-hand drive.

The general contractor of the warranty period (handover date for the period up to 36 months or 100 000 km of motor vehicles futásteljesítményéig) Hungarian repair service, as well as 0-24 Hungarian mobile service to ensure service.

The vehicle is raised minimum conditions:

The vehicle category 3 under the state grant must meet the requirements.

Additional requirements:

- Drive: a drive shaft,

- Transmission types: mechanical, at least 5 + 1,

- Capacity: up to 1400 cc,

- Engine type: petrol,

- Power: 65 kW at least,

- Body: 2-2 doors per side, the package 1 square pop-up door design,

- Payload (the driver): at least 450 kg.

The above-standard safety requirements:

- Windscreen wiper and washer,

- Automatic seat belts,

- Power steering, air

- Ascent assistant

- Engine braking torque control,

- An electronic differential lock,

- Brake Assistant.

Above normative comfort requirements:

- Central locking, radio remote control,

- Broadcast receiver with a USB port, Bluetooth telephone kit,

- Reading lights in the front seats (in the driving menetokmányok)

- Heated windshield washer nozzles,

- "Cigarette lighter" 12-volt socket in the passenger compartment and the luggage compartment at least 1-1,

- Automated or mechanical air conditioning,

- Sets of rubber mats, trunk mat,

- Reversing radar,

- Seat,

- In the luggage compartment should be fixing nets and to record at least 4 mounting points,

- Factory-board computer designed for at least the current and average fuel consumption, mileage and features.

The design plan for each vehicle, the contractor shall agree with the Customer before the contract.

The vehicle's exterior base color should be white.

The minimum technical parameters are given detailed technical description of the procurement documentation.

Custom software development services

Országos Nyugdíjbiztosítási Főigazgatóság | Published January 18, 2017  -  Deadline February 22, 2017

"Creating and related services Single Supply System (ALS)."

Uniform Supply System (EER) Design and construction, and operation-support system.

750 000 transactions take place.

The tasks include systems development across the full operating range of ONYF process reengineering (BPR: analysis and optimization), or performing administration tasks organization with the new operating model, including the preparation of technical proposals for the necessary legislative changes as well.

System design jobs after the administration organizational tasks include designing the entire system architecture (hardware, software components), including the addition of support for the administrative functions that support the operation of software applications design environment.

to be performed within the implementation phase of activities included in the finished installation of software licenses required for the modification of software components currently in operation, preparation and integrate these components in the new unified system architecture for new applications.

All software required for the safe, cost-effective and user-friendly operation of the system components to design, supply and integration of the system includes the development of terms of reference.

The introduction of customer agreed to conduct testing and making the required user and operator training.

Results Product (s):

EER Uniform Supply System integrated information system transferred to the Customer-tested state encompassing the final bid-winning supplier of software components formulated, related documentation and training required for the use and operation.

Product list for partial fulfillment of the industrial and entrepreneurial award in accordance with section assigned to be clarified during the negotiations, and contracts made on the basis of the winning bid will be recorded in the Annex.

31/12/2017.

Process Assessment, Process and transfer of technology and planning of results, software tools needed for development delivery, preparation and delivery of pilot schemes planned for the first phase.

06/30/2018.

The transfer of test development operation.

Végteljesítés: 24 months after the treaty enters into force, but not later than 6 weeks prior to the first day of the current date of the project is in sharp physical closing of the transfer operation of the entire system EER (now closing date of the project 31.12.2018.).

a detailed description about the expectations contained in the technical specification.

Construction work

Magyar Nemzeti Vagyonkezelő Zártkörűen működő Részvénytársaság | Published January 19, 2017  -  Deadline March 6, 2017

Determination of the contract: Framework agreement, the second phase of the framework agreement procedure of a contract.

Subject: ". The conclusion of a framework agreement related to the MNV tasks to perform construction works".

framework agreement related to the MNV Zrt.'s tasks to perform construction work, the allocation (net 40 billion HUF) last.

Expected main works: In particular, but not being limited to protected monuments building sites: building construction work, complete renovation / remodeling / reconstruction (structural engineering, architecture, engineering, strong and weak electricity, elevators, exterior works, facade and roof insulation, window replacement, heat and waterproofing systems, solar collectors and solar systems construction, preservation, restoration), the restoration works, parking garage, other civil engineering works where appropriate, special civil engineering technology (piling and diaphragm wall), existing buildings, renovation / conversion, new building (for industrial / public building) construction may have.

Part Bidding is not possible, with regard to:

Based are ordered by MNV Zrt high character works as a general rule based on this framework agreement award procedure.; In this circle were three people in order to ensure both greater competition - tendering procedure had been determined - based on race újranyitásán. Thus, indirectly, the performance of the framework agreement broken down into several parts, ie, default by a number of undertakings as possible. tasks do not belong to this group of MNV Zrt. - the investment activities of maritime administrations - separate procurement procedures to award, given that it is to bring more opportunity for the operator to perform a task.

Catenary's construction works

NIF Zrt. | Published December 23, 2016  -  Deadline February 7, 2017

Determination of contract:.

"Szabadbattyán - Tapolca - Keszthely implementation bottlenecks challenge, electrification and centralized traffic control around the lake Phase I (Szabadbattyán-Aszófő)" project overhead line construction, railway construction and additional works of design and construction.

framework contract for the "Szabadbattyán - Tapolca - Implementation of Keszthely bottleneck challenge, electrification and centralized traffic control around the lake Phase I (Szabadbattyán-Aszófő)" project overhead line construction, railway construction and additional works of design and construction, the following main quantities:

Szabadbattyán - Aszófő electrification of the railway line, 50 Hz 25 kV AC overhead electrical design and construction of 60 km .;

Electrical substation design and construction of two locations;

transformer provided by the expansion and redevelopment of Customer Szabadbattyán existing 120/25 kV substation, transmission line construction in the feeding phase limit;

Aszófő existing 120/25 kV substation expansion for MAV provided by Customer transformers, power supply phase construction of the border;

Exchange Heating Design and construction of 42 bypass group;

Optical Cable Design and Construction (part vasútvillamosítás) 60 km;

5. Consolidated train operation control system is installed (as part vasútvillamosítás);

Catenary power control (FET) Establishment (part vasútvillamosítás):

6.1. Station 8;

Phase Cross: 3;

Bypass installation or replacement, substructure reinforcement:

Polgárdi industrial sites Station: 4 groups;

Polgárdi Station: 2;

Csajág station: 5 groups;

Balatonkenese station: 4 groups;

Balatonfűzfő station: 4 groups;

Balaton station: 4 groups;

Alsóörsi station: 5 groups;

Balatonfüred station: 12 groups;

Aszófő Station: 2;

Track construction substructure reinforcement: 11,5 km;

Strengthening local substructures: 700 vm;

Widening Alépítménykorona: 1900 vm;

11 Ágyazatrostálás 8750 vm;

Edilonos track construction system: 180 m;

Peronépítés (SK + 55 cm magasperon small battery cover 250 m in length):

13.1. Középperon station: 9;

Stops: 7;

Paved ditch construction: 4800 m;

Leakage System Construction of 14 km .;

One or multiple track crossing, providing level crossing level crossing, pedestrian and duty construction and reconstruction:

Rail and road crossings to ensure crossing 29 group;

providing rail-pedestrian crossing pedestrian crossing 23 group;

platform approach to providing pedestrian passage 11 group;

16.4. Station operating passage: 3 groups;

Peronaluljáró Balatonfüred renovation of the station;

Peronaluljáró Csajág renovation of stairs, and Balatonfüred stations;

Installation of platform lifts for disabled approach and Balatonfüred station: 4;

Small works of art construction / reconstruction: 3;

Stairs and ramps Reconstruction Balatonakarattya stop there;

Bridge Insulation works Renovation of objects: 2;

Railway perontető refurbishment / redevelopment Balatonfüred station;

Stations are installing shelters: 21 pc;

Asset protection, installation of fire alarm systems in buildings admission: 7;

Alsóörs power station design office;

Balatonfüred Kofi station design center;

28 Stations remotely control the station building 8;

29 station interlocking in accordance with, the construction phases, 8. station;

standardization of public utility crossings;

Create and export licensing and combined plans for implementation.

  • 1