Public tenders for heating in Fort-belvoir-va United States

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!

41--Heating System for Paint Booth

Department of the Army, FedBid | Published September 13, 2016
cpvs

No Description Provided

41--Heating System for Paint Booth

Department of the Army, FedBid | Published September 6, 2016  -  Deadline September 8, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is DPWSJC0002 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89-1. The associated North American Industrial Classification System (NAICS) code for this procurement is 333414 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-09-08 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Drum, NY 13602 The MICC Fort Drum requires the following items, Brand Name or Equal, to the following: LI 001: Indirect Air Make-Up Unit, 1, EA; LI 002: Exhaust System to include: 1 ea.42? Tube axial in-line exhaust fan (25,600 Total CFM @ 3/8? S.P.) Tube axial fans shall feature a continuously welded housing for an airtight seal. The propellers are non-sparking cast aluminum for consistent air velocity at higher static pressures. The universal motor plates will allow adjustable belt tensioning. The bearings are of premium air handling quality, self-aligning, and have an L10 life of 40,000 hours. The belt guard provides protection from the rotating pulley (OSHA Requirement). Fan has been designed per AMCA 210 Standards. 1 ea. 7.5 h.p. tri-voltage 208/230/460 volts, 3 phase, 60 Hz TEFC high efficiency motor with variable pitch drive sheave. Motors shall feature a heavy gauge steel frame, double sealed ball bearings that are mechanically locked on the shaft end, and bolt on motor base for easy removal. The service factors for the motor shall be 1.15 for 3-phase power and 1.0 on 1-phase power. UL recognized and CSA certified., 1, EA; LI 003: Control Panel 1 ea. Shall be Pre-wired electrical control panel (480v. 3ph. 3 wire) featuring single point power connection for quick and easy wiring to the line side of the main disconnecting device with NEMA-12 rated enclosure. Shall Include: Main breaker disconnect Motor fuse protection Lighting contactor ? Total of 40 Fixtures ? 4 tube type Lighting fuse protection Terminal strips for field wiring System operating lights Air make-up temp selector UL industrial listing, 1, EA; LI 004: Air Balancing System: 1 ea.Auto-Balance System (Model # AB-7) Shall be Designed to automatically keep the paint booth balanced when in operation. It is recommended on all pressurized booths. This system consists of a variable frequency drives that control the exhaust fan motor, differential pressure gauge and sensing probes. The system monitors the interior booth pressure and will adjust the exhaust fan RPM?s to what is needed for the volume of exhaust air based on what the incoming intake air is. The result is a booth that is balanced automatically and shall stay in balance as the filters load up with paint over spray. System shall increase useful filter life, provide a constant airflow through the booth and the ability to control booth pressure., 1, EA; LI 005: Air Replacement System:1 ea. 25,600 CFM In-Direct Fired Gas Heated Outdoor Vertical Mounted Air Make-up Unit to replace the exhaust air from the paint spray booth. Complete with the following: V2 Vertical Unit Arrangement with Side Discharge 100% Replacement Air 25,600 SCFM / 0.5 Duct SP / 1.02 Total ESP / BHP: 22.63 Electric Current: 440-480/60/3 3-wire ETL Label Outdoor Safety Switch (Disconnect) and Motor Starters Unit Location: Outdoor Installation 25 HP Motor - ODP - High Efficiency EPACT 2,400 BTUH (in 1000's) / 85 Temperature Rise (deg F) Gas Pressure: 1# to 5# (Natural Gas) Heat Exchanger: Stainless Steel ? 10:1 Turndown Temperature Control System: 401M - Maxitrol External Discharge Damper with 2 Pos Motor and Interlock V-Bank Two inch Cleanable Filter G-90 Galvanized Casing - Unpainted Casing - 170? wide x 70? deep x 240? high. Intake Screen Burner On/Off Intake Air Ductstat Clogged Filter Switch with Light 0-35?wc Supply Inlet and -5 to +15? wc Burner Outlet Pressure Gauges Vertical Mounting Stand (Unit weight is 17,000 lbs.) Insulated Unit with Flue Duct N.O. Contacts, 1, EA; LI 006: Air Replacement Ductwork:1 lot Air make-up unit ductwork to include: Discharge Ductwork 15 ft. Straight duct 2 ea. 90? Vertical elbow 1 ea. Transition to plenum, 1, EA; LI 007: Exhaust Ductwork: 1 lot 42? dia. Exhaust ductwork for a 30 ft. high roof to include: 1 ea. 8? sections of spiral duct with connecting rings on both ends 1 ea. 8? sections of spiral duct with inspection door and connecting rings on both ends 1 ea. Flat roof flange 1 ea. Automatic roof ventilator with ring, 1, EA; LI 008: Assembly Hardware: 1 lot Necessary assembly hardware including all required bolts, nuts, & caulking for a complete mechanical assembly. (Note: Anchor bolts by others unless specified) 1 set Exploded view installation drawings for easy assembly, 1, EA; LI 009: Equipment Start up: The safe and proper use of the manufactured equipment requires a start-up, test and balance at the time of installation. A properly trained and equipped service person is available to perform this service on any piece of the equipment. The manufactured equipment may require this service to validate warranty. Before a startup is scheduled, customer must fill out, sign and return the startup check list. Start-ups must be scheduled (14-21) or more days in advance and after the receipt of check list. All equipment shall be painted according to OSHA Standards., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Drum intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Drum is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions ? Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-- System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. The associated North American Industrial Classification System (NAICS) code for this procurement is __________ with a small business size standard of ___ employees. AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. 52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report 252.204-7012 Safeguarding of Unclassified Controlled Technical Information IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an ?all-or-nothing? basis. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions All deliveries to Fort Drum shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.

W--Heating Ventilation Air Conditioning (HVAC)/POWER Support

Department of the Army, FedBid | Published April 15, 2016
cpvs

No Description Provided

44--Loars pennant Gas water boiler Heating water

Department of the Army, FedBid | Published November 22, 2017
cpvs

No Description Provided

HVAC and Boiler Upgrades, DLA Headquarters Facility, Fort Belvoir, VA

Department of the Army, U.S. Army Corps of Engineers | Published February 10, 2015
cpvs

This Pre-Solicitation Notice is being issued by the United States Army Corps of Engineers - Baltimore District to inform interested/potential contractors of the District's imminent issue of a Request for Proposal Package for its construction project, entitled "HVAC and Boiler Upgrades, DLA Headquarters Facility, Fort Belvoir, VA." PROJECT INFORMATION: BOILER: Upgrade the current heating water system with replacing three boilers located in Pods 1-9 with six 3mmbtu condensing boilers. Replace all of Pod 10's boilers with high efficiency ones. Install new control system. Replace all hot water distribution pumps with variable speed drive motors. Interested sources shall submit a qualifications statement demonstrating their ability to perform work as described above. The narrative shall include a summary of qualifications, details of similar work experience, including dates of performance and references with contact information. HVAC CHILLER: Upgrade the current heating, venting, & air conditioning (HVAC) system. Replace the 3 (three) oldest 500-ton chillers with 3 (three) 750-ton chillers. Install a new system/building-wide HVAC control system. Replace any controls that are not direct digital and not compatible with the new system. New system incorporates energy saving features like winter/summer time room temperature control. Replace all motors with variable speed drive, and all work/material required to abandon the ice storage system. PROJECT LOCATION: Ft. Belvoir, VA ACQUISITION INFORMATION: Competition for this acquisition is set aside for Section 8(a) firms. The Classification Code for this procurement is North American Industry System Code 238220, with a small business size standard in dollars of $15,000,000.00. The magnitude of construction is $10M to $25M. The Request for Proposal Package will be downloadable from the INTERNET ONLY. The project specification files are Portable Document Format (PDF) files and can be viewed, navigated, or printed using Adobe Acrobat Reader. Interested Offerors can download the RFP Package from: http://www.fbo.gov. The RFP Package will be available at the aforementioned Internet site on or about 27 February 2015. IN THE CASE OF A DISCREPANCY BETWEEN THE DATES PUBLISHED IN THIS NOTICE AND THOSE CALLED OUT IN THE RFP DOCUMENT, THE DATES IN THE RFP DOCUMENT OVERRIDES THOSE PUBLISHED HEREIN THIS NOTICE; THIS IS RELATIVE TO THE RFP ISSUANCE DATE AND THE DUE DATE FOR OFFERS. In order for contractors to be awarded contracts with the Department of Defense, the contractor must be registered in the System for Contract Management (SAM); Contractors can access the SAM database for free at http://www.sam.gov. The Government intends to award a firm-fixed price construction contract from this acquisition. FAXED OR ELECTRONIC OFFERS WILL NOT BE ACCEPTED. Request for solicitation packages made by telephone, fax or e-mail will not be honored. ** Please include Solicitation Number W912DR-15-R-0012 on all correspondence. **

Y--Fort Hood VOLAR Barracks and Central Energy Plant (CEP)Renovations, Fort Hood, Texas

Department of the Army, U.S. Army Corps of Engineers | Published January 30, 2015  -  Deadline March 4, 2014
cpvs

Project Description includes the design and construction for the whole block revitalization of the west 39000 block, to include Barracks Buildings 39004, 39005, 39006, 39007, 39012, 39013, 39017 and CEP 39015, renovation of laundry facilities in each barracks, replacement of distribution piping, water and sewer lines to all buildings within the west 39000 block, sidewalk replacement, parking lot reconfiguration and reconstruction, and landscaping. All barracks shall be designed and constructed to house one soldier per room under normal conditions, but the design shall also support two soldiers per room under surge conditions. This project includes the demo of chilled water and steam piping to all buildings supported by the CEP and replacement with a condenser water loop system for ground source heat pumps in the barracks and a heating water loop for domestic hot water. This project also requires providing 40% domestic hot water with solar for the barracks and solar water heating at the central energy plant for the heating water loop. Provisions shall be made for future connection of Headquarters Building 39021 and 39022 to the new condenser water loop.

50 drums antifreeze and antiboil inhibit 215KG

Department of the Army, Army Contracting Command, ECC | Published December 8, 2015  -  Deadline December 17, 2015
cpvs

SALIENT CHARACTERISTICS MINIMUM SALIENT CHARACTERISTICS OF ANTIFREEZE AND ANTIBOIL INHIBITOR Propylene glycol antifreeze and antiboil inhibitors used in chilled water systems and heating boilers with following characteristics Physical State...................................................................................Liquid Boiling Point........................................................................365°F (177o C) Vapor Pressure....................................................................................1 Solubility in Water........................................................................Complete Specific Gravity (Water=1)...........................................................1.03 - 1.06 pH..................................................................................................7.5 - 9.0 Odor.....................................................................................Mild, Odorless Appearance.................................................................Yellow, Transparent

INTENT TO SOLE SOURCE - PM SERVICES ON BUILDING CONTROL SYSTEMS

Department of Health and Human Services, Indian Health Service | Published September 2, 2016  -  Deadline September 17, 2016
cpvs

The Billings Area Indian Health Service (IHS) intends to award a non-competitive purchase order to Standard Plumbing Heating Controls Corporation, 10419 E. Trent Avenue, Spokane, Washington 99206-4515, for Annual Preventive Maintenance Services on the Building Control Systems at the Crow Service Unit, Crow Agency, Lodge Grass and Pryor, Montana; Fort Peck Service Unit, Poplar and Wolf Point, Montana; and Fort Belknap Service Unit, Harlem and Hays, Montana. The WebCTRL building control system is a proprietary direct digital control system that controls the HVAC mechanical systems within the healthcare facilities. Standard Plumbing Heating Controls is the local distributor and only authorized company to service the system. The procurement will be conducted pursuant to the authority of Federal Acquisition Regulation (FAR) Part 13, Simplified Acquisition Procedures; 41 U.S.C. 3304(a)(1), as implemented by FAR 6.302-1, Only one responsible source and no other supplies or services will satisfy agency requirements; and FAR 37.101, Non-Personal Service Contract. The IHS anticipates the award of a fixed-price purchase order for the period October 1, 2016, through September 30, 2017. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

Mechanical Maintenance Support Services

Defense Logistics Agency, DLA Acquisition Locations | Published November 17, 2017  -  Deadline November 30, 2017
cpvs

The Defense Contracting Services Office - Fort Belvoir (DCSO-F) is currently conducting market research seeking capabilities statements from potential sources as well as seeking industry input on the attached DRAFT Performance Work Statement (PWS). DCSO-F is seeking sources of a Mechanical company on behalf of the Defense Logistics Agency (DLA) Installation Management (DF-FFI) at Fort Belvoir with the capability to provide operation, maintenance, service, repair, replacement and minor construction and alteration services for the Defense Logistics Agency Headquarters Complex (HQC) and associated facilities. For further information, please see attached Draft PWS within the attached DRAFT Solicitation. The proposed North American Industry Classification System (NAICS) code for the future acquisition is 238220- Plumbing, Heating, and Air-Conditioning Contractors with a size standard of $15,000,000. DSCO-F is NOT requesting a proposal in response to this draft solicitation. A DRAFT Solicitation is included with this notice. It should be noted that this document is strictly for acquisition planning purposes and should not be considered a final document for future procurement actions. This synopsis neither constitutes a Request for Proposal or Bid, nor does it restrict the government to an ultimate acquisition approach. The draft solicitation should not be construed as a commitment by the government for any purpose. All interested organizations are encouraged to submit capabilities packages addressing the specific criteria identified below. The packages will be reviewed according to these criteria. It is the policy of the Government to provide maximum practicable opportunities in its acquisitions to small business, veteran-owned small business, service-disabled veteran-owned small business, HUBZone small business, small disadvantaged business, and women-owned small business concerns. The resulting evaluation of all organizations providing capabilities packages will be considered in determining the acquisition strategy, specifically in determining for which (if any) small-business concerns this acquisition will be set-aside in accordance with FAR 19.5. Interested sources who believe they can meet these requirements should provide a statement of capabilities that clearly addresses the below questions: 1. Does the company possess a current Commonwealth of Virginia Class A Contractors License, Fairfax County Business License, Commonwealth of Virginia Master HVACR License, and Commonwealth of Virginia Master Plumber License? 2. Does the company currently have an active Facility Clearance at the secret level or better? 3. How many personnel does the company have that possesses a current secret level clearance or better and the licensing and certifications needed for this requirement?4. Please provide a list of commercial buildings that are at least one million square feet that the company has performed a long term mechanical maintenance service contract on.5. Does the company have the ability to perform 95% of all mechanical maintenance services (FFP + IDIQ) specified within the Draft PWS without subcontractors. (in house)6. Does the company have branches or departments within the company, specifically Plumbing, HVAC, Design and Engineering, Electrical, and Controls Department? 7. Have you performed the same or similar work in the past?8. What are your specific technical skills that will ensure your capability to perform the requirement? In addition to the above, the capability statement must include: 1. Company name, address, point of contact name, phone number, fax number, and email address.2. Business Size and status of your company3. Contractor and Government Entity (CAGE) Code. THERE IS NO SOLICITATION AT THIS TIME. Interested sources are requested to review the attached DRAFT Solicitation and attend the Pre-Solicitation Conference which will be on Wednesday, November 29, 2017 at 1:00 p.m. EST. The Pre-Solicitation Conference will be held at DLA HQ, 8725 John J. Kingman Road, Fort Belvoir, VA 22060. All attendees will meet in the lobby after checking into the building. Offerors will be limited to three (3) total attendees per Company and the attendees must register with Ronald Fairley at ronald.fairley@dla.mil by 1:00 p.m. EST on Monday, November 27, 2017. A Site Visit/Walk-thru will follow the conference. To gain access to the installation you will need to have a government issued ID (e.g. driver's license, state issued photo ID) for every individual, and vehicle registration and insurance for each vehicle. Once you have entered to the gates, proceed to the flags to check in the building. As stated above, the Government is providing industry an opportunity to submit any questions or feedback regarding this requirement. DRAFT RFP questions and capability statements should be sent to Ronald Fairley at ronald.fairley@dla.mil and Beverly J. Williams at Beverly.j.williams@dla.mil no later than 1:00PM EST on Monday, November 27, 2017. All correspondence sent via email shall contain a subject line that reads "DRAFT Solicitation - Mechanical Maintenance Services". If this subject line is not included, the e-mail may not be reviewed. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, .docx, .xsls, or .xls documents are attached to your email. All other attachments may be deleted. The Government will respond to the questions at the Pre-Solicitation Conference. This announcement is for information and planning purposes only and is not to be construed as a commitment by the government, implied or otherwise, to issue a solicitation or award a contract. Contractors assume financial responsibility for any costs incurred. Additional information, as it becomes available, will be posted as amendments to this announcement. All amendments will be available for viewing at this website. It is incumbent upon the interested parties to review the site frequently for any updates and amendments to any and all documents. All potential offerors are reminded, in accordance with FAR 52.204-7, System for Award Management (SAM) at https://www.sam.gov, lack of registration in the System for Award Management (SAM) will make an offeror ineligible for contract award. Respondents will not be notified of the results of the evaluation of the capability statements received. No solicitation exists at this time; therefore, do not request a copy of the solicitation. If a solicitation is released, it will be posted at the FedBizOpps website. It is the potential offeror's responsibility to monitor the FedBizOpps website for the release of any synopsis or solicitation that may result from this market research. Information collected through this announcement will be reviewed by individuals from the DCSO-F and DLA Installation Support. Capability statements shall be limited to no more than seven pages and sent directly to both Beverly J. Williams and Ronald Fairley. Only electronic responses will be accepted. PHONE CALLS WILL NOT BE ACCEPTED, VOICE MAIL MESSAGES LEFT WILL NOT BE RETURNED, AND EMAILS RECEIVED WILL NOT BE RESPONDED TO.  

Heat Exchanger

Department of Justice, Bureau of Prisons | Published February 2, 2016  -  Deadline February 12, 2016
cpvs

The Federal Bureau of Prisons FMC Carswell in Fort Wort, TX, intends to make a single award for the provisions of 2 Heat Exchangers to FMC Carswell. It is anticipated that this RFQ will result in the award of a single contract. The contract type is an indefinite delivery/requirements contract with firm fixed unit prices. Award will be made to the responsible quoter who submits the most advantageous offer to the Government. All other qualifications and requirements will be detailed in the solicitation. The solicitation will be available February 2, 2016 and will be distributed solely through General Services Administration Federal Business Opportunities website www.fedbizzopps.gov. All future information concerning this acquisition, including solicitation amendments, will be distributed solely through this website. Interested parties are responsible for monitoring the site to ensure you have the most up to date information about this acquisition. Hard copies of this solicitation will not be available. The website provides all information about this acquisition. The anticipated date for the receipt of quotes is on or about February 12, 2016. The solicitation will be unrestricted. The North American Industrial Classification System (NAICS) code is 33314 with a standard size of 500 employees. All contractors doing business with the Federal Government must be registered in the Systems for Award Management (SAM). The website for registration is www.sam.gov.

Replace Stem Heat Vats with New Electric Heated Vats

Department of the Army, Army Contracting Command, MICC | Published July 13, 2016  -  Deadline August 31, 2016
cpvs

Mission and Installation Contracting Command (MICC) Fort Hood is issuing a PRE-SOLICITATION NOTICE for an Invitation for Bids (IFB) firm fixed price construction contract to Replace Steam Heat Vats with New Electric Heated Vats, Fort Hood, Texas. This acquisition is 100% set aside for Historically Underutilized Business Zone (HUBZone) for NAICS 238220 (Size Standard $15 Million). The magnitude of the procurement is estimated to be between $100,000 and $250,000. The purpose of this project is to remove boilers and steam heated vats and install new electric heated vats. All work under this contract will be performed within the confines of the Fort Hood Military Installation, at Fort Hood, Bell County, Texas. Davis Bacon Wage Decision and Texas Wage Determination TX160279 Construction Types: Building; Counties: Bell and Coryell Counties in Texas, will govern work under this contract. Performance and payment bonds, in the bid amount, are required for this contract. A bid guarantee in the amount of 20% of the bid price is also required. An organized site visit will be conducted for this procurement and details of that site visit will be available in the solicitation. Under this contract, the contractor shall provide all plant, supervision, labor, materials, equipment, supplies and transportation necessary to complete this scope of work. Except as provided elsewhere in this contract, all work shall comply with applicable State, local and Federal laws and regulations, industry and construction codes and standards, manufacturer's specifications and recommendations, and all contract special provisions, terms and conditions. The solicitation will be issued on or about 29 July 2016 under solicitation number W91151-16-B-0020 to the Federal Business Opportunity (FedBizOpps) at https://www.fbo.gov. No paper copies of this solicitation are available. Once the solicitation is posted, it is incumbent upon the interested parties to review this site frequently for any updates/amendments to all documents. Interested parties must be currently registered in the System for Award Management (SAM) at https://www.sam.gov to receive a government contract award. Bidders shall register in SAM as well at https://www.sam.gov. Online Representations and Certifications Application (ORCA) must also be current to qualify to receive a contract award. Bidders shall register Representations and Certifications at http://orca.bpn.gov. The point of contact for this acquisition is SFC Kenyanna L. Jennings, Contract Specialist, and can be contacted by email at kenyanna.l.jennings.mil@mail.mil.

HEAT Support and Maintenance Service

Other Defense Agencies, Defense Media Activity | Published March 9, 2016  -  Deadline March 23, 2016
cpvs

  This requirement is to purchase HEAT Software maintenance and support. The service required is for 12 months of HEAT technical support and software maintenance which includes software updates, bug fixes, security patches and telephonic support.

Request for Quotation: Heat Sealer

General Services Administration, Federal Acquisition Service (FAS) | Published November 21, 2017
cpvs

Award of RFQ 47QSWB-18-C-0901 has been made to F & M Micro for NSN 3540-01-429-1460 at a unit price of $2,249.00 each.  This Standing Quote Agreement will not exceed $149,999 or five years, whichever comes first. 

J--Boiler repair 663-16-1-882-0046

Department of Veterans Affairs, Portland VAMC | Published May 10, 2016  -  Deadline May 13, 2016
cpvs

1. The Department of Veterans Affairs, Puget Sound VAMC intends to solicit proposals for Boiler Repair at the American Lake VA in Washington. A Statement of Work (SOW) will be included in the solicitation. The Request for Quotations number is VA-260-16-Q-0471. 2. The solicitation will result in the award of a single contract. The resulting contract will be a firm fixed-price contract. The applicable NAICS code is 238220 - Plumbing, Heating, and Air-Conditioning Contractors and the small business size standard is $15 million. This procurement is set-aside for small businesses. 3. The intended contract period is 30 days after receipt of order. 4. Telephonic requests for the solicitation will not be honored. When issued, the solicitation will be available via the FedBizOpps website, http://www.fbo.gov/. The tentative solicitation issue date is 5/10/2016, and the anticipated closing date is 5/10/2016. Interested offerors are advised to consult the actual solicitation for final dates and times. 5. Offers from all capable and responsible sources will be considered. Firms offering a response to this notice should ensure that their registration in the Systems for Award Management (SAM) database http://www.sam.gov/ is current and should ensure that the applicable NAICS code (238220) is included in the SAM profile prior to submission of quotations.

44--AQ6 AHRI- certified plate heat exchanger

Department of the Army, FedBid | Published November 15, 2017  -  Deadline November 20, 2017
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is RL112017 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-96. The associated North American Industrial Classification System (NAICS) code for this procurement is 221330 with a small business size standard of $15.00M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-11-20 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Ft. Campbell, KY 42223The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Description see Attach. This system must be able to support the Boiler System from Cleaver Brooks Model 5 million BTU Boiler Model CFLC, 1, EA;Solicitation and Buy Attachments***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing” basis.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

Fort Knox HVAC Maintenance and Repair Service

Department of the Army, Army Contracting Command, MICC | Published September 8, 2015  -  Deadline September 17, 2015
cpvs

Solicitation Number: W9124D-15-B-0012 Notice Type: Pre-solicitation Synopsis: Mission Installation Contracting Command - Knox intends to issue an Invitation For Bids (IFB) for maintenance and repair services for a variety of HVAC units (to include heating systems up to 1.7 MM BTU/HR and air conditioning equipment up to 600 tons and their components in buildings on Fort Knox. This solicitation will be set-aside for HubZone Small Business; all responsible and responsive businesses may submit an offer for consideration. A firm fixed price purchase order will be awarded. NAICS 238220 (Size Standard: $15.0M) applies to this procurement. The IFB will be posted to the Federal Business Opportunities website at http://www.fbo.gov on or about 8 September 2015 with bids due on or about 17 August 2015. These dates are subject to change. All amendments to the solicitation will be likewise posted on this website. Contractors are cautioned to check the website periodically for amendments. Solicitation mailing list will not be compiled and the IFB and amendments will not be sent out in paper copy. All documentation can and must be downloaded from the website above. Anticipated award date will be on or about 28 September 2015. All contractors must be registered in the System for Award Management (SAM) at www.sam.gov to be eligible for award of a contract. Faxed offers or amendments will not be accepted. All bids must be submitted by mail or hand delivered writing to James Hurt via email at james.hurt.civ@mail.mil. 199 6th Ave Bldg 1109 B Ste 373 Ft Knox, KY 40121-5720 Primary Point of Contact: James Hurt Contract Specialist james.hurt.civ@mail.mil Phone: 502-624-5777 Fax: 502-624-7165

FORT KNOX HVAC SERCIVE

Department of the Army, Army Contracting Command, MICC | Published September 10, 2015  -  Deadline September 17, 2015
cpvs

Solicitation Number: W9124D-15-B-0012 Notice Type: Pre-solicitation Synopsis: Mission Installation Contracting Command - Knox intends to issue an Invitation For Bids (IFB) for maintenance and repair services for a variety of HVAC units (to include heating systems up to 1.7 MM BTU/HR and air conditioning equipment up to 600 tons and their components in buildings on Fort Knox. This solicitation will be set-aside for HubZone Small Business; all responsible and responsive businesses may submit an offer for consideration. A firm fixed price purchase order will be awarded. NAICS 238220 (Size Standard: $15.0M) applies to this procurement. The IFB will be posted to the Federal Business Opportunities website at http://www.fbo.gov on or about 8 September 2015 with bids due on or about 17 August 2015. These dates are subject to change. All amendments to the solicitation will be likewise posted on this website. Contractors are cautioned to check the website periodically for amendments. Solicitation mailing list will not be compiled and the IFB and amendments will not be sent out in paper copy. All documentation can and must be downloaded from the website above. Anticipated award date will be on or about 28 September 2015. All contractors must be registered in the System for Award Management (SAM) at www.sam.gov to be eligible for award of a contract. Faxed offers or amendments will not be accepted. All bids must be submitted by mail or hand delivered writing to James Hurt via email at james.hurt.civ@mail.mil. 199 6th Ave Bldg 1109 B Ste 373 Ft Knox, KY 40121-5720 Primary Point of Contact: James Hurt Contract Specialist james.hurt.civ@mail.mil Phone: 502-624-5777 Fax: 502-624-7165

J--MICC - Knox intends to issue an Invitation For Bids (IFB)for maintenance and repair services for a variety of HVAC units in buildings on Fort Knox KY.

Department of the Army, Army Contracting Command, MICC | Published July 24, 2015  -  Deadline August 18, 2015
cpvs

Solicitation Number: W9124D-15-B-0005 Notice Type: Pre-solicitation Synopsis: Mission Installation Contracting Command - Knox intends to issue an Invitation For Bids (IFB) for maintenance and repair services for a variety of HVAC units (to include heating systems up to 1.7 MM BTU/HR and air conditioning equipment up to 600 tons and their components in buildings on Fort Knox. This solicitation will be set-aside for HubZone Small Business; all responsible and responsive businesses may submit an offer for consideration. A firm fixed price purchase order will be awarded. NAICS 238220 (Size Standard: $15.0M) applies to this procurement. The IFB will be posted to the Federal Business Opportunities website at http://www.fbo.gov on or about 24 July 2015 with bids due on or about 18 August 2015. These dates are subject to change. All amendments to the solicitation will be likewise posted on this website. Contractors are cautioned to check the website periodically for amendments. Solicitation mailing list will not be compiled and the IFB and amendments will not be sent out in paper copy. All documentation can and must be downloaded from the website above. Anticipated award date will be on or about 1 September 2015. All contractors must be registered in the System for Award Management (SAM) at www.sam.gov to be eligible for award of a contract. Faxed offers or amendments will not be accepted. All bids must be submitted by mail or hand delivered writing to James Hurt via email at james.hurt.civ@mail.mil. 199 6th Ave Bldg 1109 B Ste 256 RM 373 Ft Knox, KY 40121-5720 Primary Point of Contact: James Hurt Contract Specialist james.hurt.civ@mail.mil Phone: 502-624-5777 Fax: 502-624-7165

HVAC Replacements in Laredo, Eagle Pass & Del Rio, Texas

General Services Administration, Public Buildings Service (PBS) | Published April 8, 2016
cpvs

Project Description The General Services Administration requires the removal of existing and installation of new air handler units, roof top units, and a chiller at Border Patrol Stations in Laredo, Eagle Pass and Del Rio, Texas. The work is to be completed within ninety (90) calendar days of the issuance of the Notice to Proceed. The work will consist of, but is not limited to, the following: TX0282JL - Administration Building #2 (Termination I-35 Laredo, TX)1. Remove all Air Handler evaporator coils, drain pans (where possible), actuator valves, cutoff valves, pressure gauges, thermometers and up to 60 linear feet per unit of chilled water and hot water pipe with insulation on 9 each Chilled water air Handlers. 2. Furnish and Install 9EA Air Handler Chilled and Hot water coils, and stainless steel drain pans, replace bearings, shaft and blower assembly on each Air Handler, DDC actuator and valves for each coil, 2 cutoff valves/coil to isolate coil, 2 pressure gauges/coil inlet and outlet, 2 thermometers per coil inlet and outlet, 1 strainer per coil, I flow setter per coil, balance report on all coils and approximately 60 linear feet per unit of chilled water and hot water pipe with insulation and labelling on 8 each Chilled water and Hot water Air Handlers and 1 each chilled water air handler only. TX0511LR -- Border Patrol Sector Administration Building (207 W. Del Mar Blvd. Laredo, TX)1. Remove existing Air Cooled Chiller unit and dispose of properly. Demolition to include, but not limited to, cabinet, plumbing lines connections, and all related electrical accessories.2. Furnish and install new air cooled Chiller unit (Admin. Bldg. equal to or better than York M# YCAL0056EE to include High and Low Ambient kits, Post-Coated Condenser Coils and Coil Hail Guards, chiller will be installed on existing pad.3. Remove existing HVAC rooftop unit and dispose of properly. Demolition to include, but not limited to, cabinet, flexible duct connectors, plumbing lines connections, and all related electrical accessories.4. Furnish and install new packaged rooftop unit 1 EA.of same cooling and heating capacities as the existing units being replaced and to be equal to or better than Trane Precedent Model# THC092E. 208/230v, 3-phase. TX0512LR - Border Patrol Sector Building B (207 W. Del Mar Blvd. Laredo, TX)1. Remove existing condensing units and Air Handlers for split systems and dispose of properly. Demolition to include, but not limited to, compressor and all related electrical accessories. Remove all existing refrigerant lines servicing existing split system If new Split systems require refrigerant line upgrades, units to be demolished and dispose of properly. Demolition to include, but not limited to, insulation and hangers. 2. Furnish and install new split system units (condenser and air handlers) of same cooling and heating capacities as the existing units being replaced equal to or better than:    a. 1 EA 12 Ton Split System, equal to or better than 11 EER rating. Equal to or better than Trane Odyssey Split Systems, condensing unit Model # TTA150J3HS, Air Handler Model # TWE150E. Both units to be 208/230V/3PH/60    b. 1 EA 20 Ton Split System, equal to or better than 10 EER rating. Equal to or better than Trane Odyssey Split Systems, condenser Model # TTA240J3HS, Air Handler Model # TWE240E. Both units to be 208/230V/3PH/60 TX0760CR - Eagle Pass Bridge II Primary/Secondary Inspection Building (500 S. Adams Eagle Pass, TX)1. Remove existing HVAC rooftop unit and dispose of properly. Demolition to include, but not limited to, cabinet, flexible duct connectors, plumbing lines connections, and all related electrical accessories. Remove metal skirting over each booth, edging on top of each booth shall be left smooth finish. 2. Furnish and install minimum of 14 seer new packaged rooftop units 8 EA.of cooling and heating to be equal to or better than Trane Precedent Model# 4WCC4024A1000A with 6 KW heat 208/230 3ph and 1ea 5 Ton to be equal to or better than Trane Precedent Eflex Model# THZ060E4 with minimum of 15 kw heat 460v/3ph. TX0764CR - Eagle Pass Bridge II Import Dock Building (500 S. Adams Eagle Pass, TX)1. Remove existing HVAC rooftop unit and dispose of properly. Demolition to include, but not limited to, cabinet, flexible duct connectors, plumbing lines connections, and all related electrical accessories. 2. Furnish and install new 12.5 eer packaged 12.5 Ton with 36KW rooftop units 1 EA. of same cooling and heating capacities as the existing unit being replaced and to be equal to or better than Trane Precedent Model# TZD150F4N. 460v/3ph. TX0406DL - USBS Del Rio New Admin Building (Rio Grande Road Del Rio, TX)1. Provide and Install 9 each 24" x 24" RA Series new access doors to be able to access the VAV's in sheetrock ceiling door and sheetrock added to door shall be painted to match existing. Provide and install 4 each 24" x 24" MT series new access doors paint to match existing, move 1 set of 1.5" potable waterlines supply and return approximate 12" to clear VAV access door for opening for service. Modify 2 existing VAV panels to make a service access doors by cutting reinforcing and securing back in place with screws or hinges. Relocate 1 VAV from above main house air conditioning duct work move to below of duct work, electrical, controls conduits, flex duct shall be extended to incorporate the move of VAV. Contractor will be responsible of all communications to existing BAS to remain working as they were before the move. TX0411DL - Del Rio POE Head House (Rio Grande Road Del Rio, TX)1. Relocate 6 VAV's at different locations and distances, by moving VAV's existing sheet metal duct work and/or Flex duct electrical and controls shall be extended to incorporate move. Extend one 1" fire pendant and water line approx. 2 FT. to provide access to VAV for service. Contractor will be responsible of all communications to existing BAS to remain working as they were before the move1 In accordance with FAR 52.219-27, this procurement will be a SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE. At the time that an offeror submits its offer, it must represent to the Contracting Officer that it is a Service-Disabled Veteran-Owned Small Business concern under the North American Industry Classification System (NAICS) 238220 with the small business size standard of $15M. The solicitation number will be GS-07-P-16-HT-C-7002. The procurement will be awarded using FAR Part 15 procedures. The contract type will be Firm-Fixed-Price. The magnitude for this project is between $500,000 to $1,000,000. The solicitation will be available for download on or about April 25, 2016. The solicitation will be issued in electronic format only and will be posted on the Federal Business Opportunities website located at https://www.fbo.gov/. No phone or fax requests for a copy of the solicitation will be accepted. Potential offerors will be responsible for downloading the solicitation and for monitoring the website for possible amendments and/or additional information. Proposal submissions will be due on or about May 25, 2016. The Government intends to award a contract resulting from this solicitation to the responsible offeror whose proposal represents the best value from the selection of the technically acceptable proposal with the lowest evaluated price. Award will be made on the basis of the lowest evaluated price of proposals meeting the acceptability standards for non-price factors. A pre-proposal conference/site visit will be noted within the solicitation. Contractors are encouraged to attend the pre proposal walk-through and to verify all existing conditions at the job site prior to bidding on project. Failure to do so will not relieve contractor of his/her responsibility to properly estimate the cost of this project. This is the only opportunity contractors will get to visit the site to conduct a walk-through and ask questions. GSA will not have anyone available to accompany contractors or their representatives (sub-contractors) after the scheduled pre-bid walk-through.Offerors MUST be registered within the SAM database in order to receive an award for this procurement. The website for SAM is https://www.sam.gov/portal/public/SAM/. SAM is a Federal Government owned and operated free web site that consolidates the capabilities in the Central Contractor Registration (CCR)/FedReg, and Online Representation and Certifications Application (ORCA). Future phases of SAM will add the capabilities of other systems used in Federal procurement and awards processes. Offerors are required to use the SAM database for Representation and Certification submissions under this solicitation. All responsible sources may submit a proposal which shall be considered by the agency. Questions may be directed to Shawna Villarreal, Contracting Officer, at shawna.villarreal@gsa.gov.

Water Pump Module

Other Defense Agencies, U.S. Special Operations Command | Published September 16, 2015  -  Deadline September 21, 2015
cpvs

Combined Synopsis/Solicitation For Water Pump Module 1. This is a combined synopsis/solicitation for commercial items and services prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will be issued. The solicitation (H92237-15-Q-7009) is being issued as a Request for Quotation. This notice and the incorporated provisions and clauses are those in effect through the Federal Acquisition Regulations (FAR). All responsible sources may submit a proposal. 2. The North American Industry Classification System (NAICS) code is 238220 – Plumbing, Heating, and Air-Conditioning. Offerors must be registered in the System for Award Management (SAM) website at https://www.sam.gov, in order to be considered for award. 3. FAR Clauses 52.212-1 through 52.212-5 apply to this procurement. For the exact text and wording of clauses and provisions please see http://farsite.hill.af.mil. The Government contemplates an award of a Firm Fixed Priced purchase order contract resulting from this solicitation. 4. Description of services: This requirement is for a Water Pump Module and additional system parts (See Attached – REF H92237-15-Q-7009). The Delivery Location is: BLDG 3-2744 Malvesti Street Ft. Bragg, NC 28310 The Required Delivery Date is No Later Than 60 Days after the issuance of the Contract Award. This combined synopsis & solicitation notice is a request for competitive quotations. Therefore, all capability statements or quotations received prior to the RFQ close date will be considered and evaluated by the Requiring Activity. 5. The Government will award a single purchase order contract resulting from this RFQ to the responsible offeror whose offer represents the Lowest Price Technically Acceptable (LTPA) in terms of price, qualifying criteria, and technical capability. 6. Offerors must submit representations and certifications in accordance with the provision at FAR 52.212-3 Offeror Representations and Certifications—Commercial Item. (Accessible at the FAR Site, http://farsite.hill.af.mil) 7. Submit the following documents in response to this RFQ: a. Request for Quote (RFQ: H92237-15-Q-7009) (See attached document) b. Technical Capability Statement c. Proof of SAM Registration 8. Offers are due on September 21, 2015, 5:00 PM EDT. All questions/inquiries must be submitted to the contract officer via electronic mail (e-mail) not later than 3:00 PM EST on September 18, 2015. Submit offers or any questions to the attention of Blake A. Grier via email to: blake.grier@socom.mil. Offerors who fail to complete and submit the requirements above may be considered non-responsive.