Public tenders for heating in Cleveland-oh United States

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!

68--JET A FUEL WITH PRIST ADDITIVE

National Aeronautics and Space Administration, Glenn Research Center | Published November 18, 2014  -  Deadline November 25, 2014
cpvs

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as Request for Quotations (RFQ) for JET A FUEL WITH FSII ADDITIVE TO MEET SPECS; Provide paperwork with the following test sample data for delivery. Thermal stability breakpoint at 260C, H2 content (wt%), carbon content (st%), lower heating value (Mj/kg), water content (wt%), specific gravtiy at 20C and viscosity (centistokes) and density (gm/ml) at the following temperatures 15C, 20C, 30C and 40C. Standard Specifications for Aviation Turbine Fuels, approximate gallons for delivery, 8,200. Delivery to GRC MAIN GATE TO BE TAKEN TO DELIVERY TANKS ON LAB AFTER ARRIVAL. Delivery shall be FOB Destination. The provisions and clauses in the RFQ are those in effect through FAC 05-77 http://nais.nasa.gov/far/ . This procurement is a total small business set-aside. The NAICS Code and the small business size standard for this procurement are 424720 / 100 respectively. The offeror shall state in their offer their size status for this procurement. Delivery to: GRC MAIN GATE TO BE TAKEN TO DELIVERY TANKS ON LAB AFTER ARRIVAL. Delivery shall be FOB Destination. Telephone questions will not be accepted. Offers for the items(s) described above are due by 3:00 p.m. NOV 25th, 2014 to De Viancourt and must include, tax statement sheet for fuel, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors shall provide the information required by FAR 52.212-1 (JUL 2013), Instructions to Offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (SEP 2013), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (SEP 2013), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.204-10, 52.209-10, 52.219-6, 52.219-28, 52.222-3, 52.222-21, 52.2022-26, 52.222-36, 52.223-18, 52.225-3, 52.225-13, 2.232-33. The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.htm l The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/o ffice/procurement/regs/nfstoc.htm Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. Other critical requirements: MUST MEET SPECIFICATIONS: Provide paperwork with the following test sample data for delivery. Thermal stability breakpoint at 260C, H2 content (wt%), carbon content (st%), lower heating value (Mj/kg), water content (wt%), specific gravtiy at 20C and viscosity (centistokes) and density (gm/ml) at the following temperatures 15C, 20C, 30C and 40C.. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3 (AUG 2013), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http: //farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm . These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . Prospective offerors may notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi- bin/nais/link_syp.cgi . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).

Temperature Instrumentation, which will be used to both determine fluid temperatures as well as to calculate heat loads from the structural elements

National Aeronautics and Space Administration, Glenn Research Center | Published June 27, 2016  -  Deadline July 26, 2016
cpvs

Link To Document

66--TURNKEY HIGH TEMPERATURE SUPERCONDUCTOR CRITICAL CURRENT DENSITY MAPPINGSYSTEM

National Aeronautics and Space Administration, Glenn Research Center | Published April 22, 2015  -  Deadline May 8, 2015
cpvs

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ) for a Turnkey High Temperature Superconductor Critical Current Density Mapping System. This procurement is for a turnkey high temperature superconductor critical current density mapping system for non-destructive (contactless), scanning critical current density measurements on superconducting thin films. The following are the general specifications: The cryogenic system must be able to achieve temperatures less than or equal to 77 K, with a heating unit integrated for temperature control. The system must be able to accommodate samples of arbitrary shape, with a minimal area of 10 mm x 10 mm or less, and must accommodate at least four 2-inch diameter wafers. Measurements must be performed without any sample pre-processing; i.e. no need for patterning or metallic contact deposition prior to measurements. The Critical Current Density Mapping system measurement methods should support fully automated scanning of the samples. Measurements must have a spatial resolution of at least 5 mm or better at a scan rate of at least 0.2 Hz. Critical current density resolution should be at minimum 3 A/cm plus or equal to 10 percent. Control and data acquisition should be accomplished through a dedicated computer. LabVIEW driven software preferred. The system must be fully integrated; i.e. measurements must be performed without external signal generators, lock-in amplifiers, reference oscillators, etc. Form factor area should be less than 36 inches x 48 inches. Total system weight plus cryogen must be less than 100 kg. The provisions and clauses in the RFQ are those in effect through FAC _2005_- 81. This procurement is a total small business set-aside. The NAICS Code and the small business size standard for this procurement are 334513 and 500 employees, respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA Glenn Research Center, Attn: Calibration Lab, 21000 Brookpark Road, Mail Stop 21-7, Cleveland, OH 44135. Delivery shall be FOB Destination. Offers for the items(s)described above are due by close of business Friday, May 8, 2015, to NASA Glenn Research Center, Attn: Antoinette M. Niebieszczanski, 21000 Brookpark Road, Mail Stop 60-1, Cleveland, OH 44135 or antoinette.m.niebieszczanski@nasa.gov and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://server-mpo.arc.na sa.gov/Services/NEFS/NEFSHome.tml Offerors shall provide the information required by FAR 52.212-1 (APR 2014), Instructions to Offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (DEC 2014), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (MAR 2015), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACTOR AWARDS 52.209-6 PROTECTING THE GOVERNMENTS INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT 52.222-3 CONVICT LABOR 52.222-19 CHILD LABOR COOPERATION WITH AUTHORITIES AND REMEDIES 52.222-21 PROHIBITION OF SEGREGATED FACILITIES 52.222-26 EQUAL OPPORTUNITY 52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES 52.222-50 COMBATING TRAFFICKING IN PERSONS 52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING 52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER SYSTEM FOR AWARD MANAGEMENT The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.htm l The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/o ffice/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing (e-mail) to Antoinette M. Niebieszczanski (antoinette.m.niebieszczanski@nasa.gov) not later than close of business Monday, May 4, 2015. Telephone questions will NOT be accepted. Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3 (MAR 2015), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http: //farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm . These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi- bin/nais/link_syp.cgi . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).

Printer Maintenance Service- KOACL6RV107

Other Defense Agencies, Defense Finance and Accounting Service | Published May 11, 2016  -  Deadline May 18, 2016
cpvs

Information that is obtained from the contractor (or derived from information obtained from the contractor) under this clause that is not created by or for DoD is authorized to be released outside of DoD- (1) To entities with missions that may be affected by such information; (2) To entities that may be called upon to assist in the diagnosis, detection, or mitigation of cyber incidents; (3) To Government entities that conduct counterintelligence or law enforcement investigations; (4) For national security purposes, including cyber situational awareness and defense purposes (including with Defense Industrial Base (DIB) participants in the program at 32 CFR part 236); or (5) To a support services contractor ("recipient") that is directly supporting Government activities under a contract that includes the clause at 252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information. (j) Use and release of contractor attributional/proprietary information created by or for DoD. Information that is obtained from the contractor (or derived from information obtained from the contractor) under this clause that is created by or for DoD (including the information submitted pursuant to paragraph (c) of this clause) is authorized to be used and released outside of DoD for purposes and activities authorized by paragraph (i) of this clause, and for any other lawful Government purpose or activity, subject to all applicable statutory, regulatory, and policy based restrictions on the Government's use and release of such information. (k) The Contractor shall conduct activities under this clause in accordance with applicable laws and regulations on the interception, monitoring, access, use, and disclosure of electronic communications and data. (l) Other safeguarding or reporting requirements. The safeguarding and cyber incident reporting required by this clause in no way abrogates the Contractor's responsibility for other safeguarding or cyber incident reporting pertaining to its unclassified information systems as required by other applicable clauses of this contract, or as a result of other applicable U.S. Government statutory or regulatory requirements.(m) Subcontracts. The Contractor shall- (1) Include the substance of this clause, including this paragraph (m), in all subcontracts, including subcontracts for commercial items; and (2) Require subcontractors to rapidly report cyber incidents directly to DoD at http://dibnet.dod.mil and the prime Contractor. This includes providing the incident report number, automatically assigned by DoD, to the prime Contractor (or next higher tier subcontractor) as soon as practicable.(End of clause) 252.209-7991 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law-Fiscal Year 2016 Appropriations. Include the attached provision in all solicitations, including solicitations for the acquisition of commercial items under FAR part 12, that will use funds made available by the Continuing Appropriations Act, 2016 (Pub. L. 114-53) or any other FY 2016 appropriations act that extends to FY 2016 funds the same prohibitions as contained in sections 744 and 745 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW-FISCAL YEAR 2016 APPROPRIATIONS (DEVIATION 2016-O0002) (OCT 2015) (a) In accordance with section 101(a) of the Continuing Appropriations Act, 2016 (Pub. L. 114-53) and any subsequent FY 2016 appropriations act that extends to FY 2016 funds the same restrictions as are contained in sections 744 and 745 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), none of the funds made available by this or any other Act may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government; or (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that- (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (End of provision) 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (a) Definitions. As used in this clause- "Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization. "Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). "Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/ (e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). _______2-in-1____________________________________________________ (Contracting Officer: Insert applicable document type(s). Note: If a "Combo" document type is identified but not supportable by the Contractor's business systems, an "Invoice" (stand-alone) and "Receiving Report" (stand-alone) document type may be used instead.) (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. _______Destination/Destination_____________________________________________________ (Contracting Officer: Insert inspection and acceptance locations or "Not applicable.") (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table*Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC HQ0347Issue By DoDAAC HQ0423Admin DoDAAC HQ0423Inspect By DoDAAC HQ0103Ship To Code HQ0103Ship From Code Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC To be added later if necessaryOther DoDAAC(s) (*Contracting Officer: Insert applicable DoDAAC information or "See schedule" if multiple ship to/acceptance locations apply, or "Not applicable.") (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. ____ terry.l.cash6.civ@mail.mil_____________________________ ________________________________________________________________ (Contracting Officer: Insert applicable email addresses or "Not applicable.") (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. ____Not Applicable_____________________________________________________________ (Contracting Officer: Insert applicable information or "Not applicable.") (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause) 252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS AND COMMERCIAL COMPONENTS (DOD CONTRACTS) (JUN 2013)(a) The Contractor is not required to flow down the terms of any Defense Federal Acquisition Regulation Supplement (DFARS) clause in subcontracts for commercial items at any tier under this contract, unless so specified in the particular clause.(b) While not required, the Contractor may flow down to subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligation.(c) The Contractor shall include the terms of this clause, including this paragraph (c), in subcontracts awarded under this contract, including subcontracts for the acquisition of commercial items. (End of clause) DEFENSE FINANCE AND ACCOUNTING SERVICE (DFAS) PROVISIONS DFAS 52.204-9000 "REPLACEMENT OF PAPER DOCUMENT DISTRIBUTION WITH ELECTRONIC DOCUMENT ACCESS (EDA)" (June 2012) Copies of DFAS contracts and modifications are available on the Electronic Document Access (EDA) website at http://eda.ogden.disa.mil. The website provides access information as well as EDA Help Desk Support.(END OF CLAUSE)   DFAS 52.223-9000, "ENVIRONMENTALLY PREFERABLE PRODUCTS" (July 2013) The Environmentally Preferable Products clause is included in this contract to articulate the Government's policies on Green Contracting. FAR 23.403 sets forth the Federal Government's policy to acquire items composed of the highest percentage of recycled-content practical, in a cost effective manner while still obtaining other contracting goals. Recycled-content products are identified in the Environmental Protection Agency's Comprehensive Procurement Guidelines (CPGs). The United States Department of Agriculture (USDA) will be producing a similar list which designates Bio-based products. EPA guideline items (and USDA designated bio-based products, when designated) are seen as the minimum that should be considered when evaluating environmentally preferable materials. Other environmentally preferable materials and products not listed, but commonly used in industry outside of the Government, should also be considered. Executive Order 13423 (January 24, 2007) required federal agencies to use sustainable environmental practices, including acquisition of bio-based, environmentally preferable, energy-efficient, water-efficient, and recycled-content products. Moreover, it required that paper of at least 30 percent post-consumer fiber content must be acquired or used in Agency acquisitions of goods and services. Executive Order 13514 (October 5, 2009), required federal agencies to analyze internal processes and revise reporting requirements in order to achieve such results as improvement of water use and efficiency, promoting pollution prevention and elimination of waste. But more particularly as related to procurement, an emphasis was placed on efforts to advance sustainable acquisitions to ensure that 95 percent of new contract actions including task and delivery orders, for products and services with the exception of acquisition of weapon systems, are energy-efficient (Energy Star or Federal Energy Management Program (FEMP) designated - FAR 52.223-15, and -16 when specific to computer products), water-efficient (Goals within Executive Order 13514), bio-based (FAR 52.223-1 and -2), environmentally preferable (FAR 52.223-10) and/or Electronic Product Environmental Assessment Tool (EPEAT - FAR 52.223-16) certified, non-ozone depleting (FAR 52.223-11), contain recycled content, or are non-toxic or less-toxic alternatives (FAR 52.223-3 and DFARS 252.223-7006), where such products and services meet agency performance requirements. § 1. Mandatory Use of Paper and Other Products with Recycled Content. (a) All paper utilized in the performance of this contract must be of at least 30 percent post-consumer fiber content. (b) The contractor affirmatively acknowledges that it will, to the maximum extent practicable, use sustainable environmental practices including acquisition of bio-based, environmentally preferable, energy-efficient, water-efficient, and recycled-content products in the performance of this contract that meet the recycled-content recommendations for EPA designated items, which are found at http://www.epa.gov/epaoswer/non-hw/procure/products.htm. In addition, by responding to this solicitation the contractor is certifying the deliverables required under this contract shall meet the recycled-content recommendations for EPA designated items (FAR 52.223-17). § 2 Notice of Green Alternatives in Offerors' Product/Service. (a) When offering a product or service that contains "Green" components as that term is defined at http://www.epa.gov/epaoswer/non-hw/procure/products.htm, the contractor shall make the Contracting Officer aware of such facts in the submission of their quote or proposal. (b) The contractor, when appropriate, shall comply with FAR Clause 52.223-9 Estimate of Percentage of Recovered Material Content for EPA Designated Products, and provide the certification required by FAR 52.223-4, when required. § 3 Affirmative Duty of Contractors to Adhere to Green Contracting Policy. (a) Whenever practicable, the Contractor has an affirmative duty to examine its packaging to eliminate or reduce waste by volume, toxicity and/or weight and to utilize or substitute recyclable material for non-recyclable material in packaging. (b) Whenever practicable, the Contractor has an affirmative duty to find other materials utilized in the delivery of services under this contract and examine whether it can reduce waste by volume, toxicity and/or weight and to utilize or substitute recyclable materials for non-recyclable materials of items consumed in the furnishing of their services. (End of clause) DAS 52.233.9000 Agency Protests (March 2014) Agency protests shall be resolved by the contracting officer. As an alternative, an independent review at a level above the contracting officer is available upon request by an offeror. (End of provision) It is the offeror's responsibility to be familiar with the applicable clauses and provisions. Clauses and provisions in full text may be accessed via the Internet at website http://farsite.hill.af.mil.   (14) DPAS ratings are not applicable. (15) Quotes are due by 1:00 p.m. EST on 19 May 2016. Quotations MUST also contain a complete description of services offered to clearly show item meets or exceeds the requirements listed above. The Contracting Officer will review quotations based on the factors listed in this solicitation and the information furnished by the offeror. Before price is considered, the proposal must meet the technical capabilities. Submit electronic proposals via e-mail to: jason.m.hardman.civ@mail.mil Any correspondence sent via e-mail must contain the subject line "KOACL6RV107 Printer Maintenance Service." The entire quotes must be contained in a single e-mail that does not exceed 5 megabytes including attachments, if any. E-mails with compressed files are not permitted. Note that e-mail filters at DFAS-Columbus are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e., .exe or .zip files). Therefore, if the specified subject line is not included, the e-mail may not get through the e-mail filters. Also be advised that .zip or .exe files are not allowable attachments and may be deleted by the email filters at DFAS-Columbus. If sending attachments with email, ensure only .pdf, .doc, .docx, .xls or .xlsx documents are sent. The email filter may delete any other form of attachments. E-mail quotes are acceptable and preferred. Quotes may be submitted by mail and forwarded to: (16) Point of Contact: Jason M. HardmanDFAS Contract Services Directorate3990 E. Broad StreetBldg. 21, Room 2B218Columbus, OH 43213-1152Telephone Number: (614) 701-4083Facsimile Number: (614) 701-2918Email Address: jason.m.harmdman.civ@mail.mil Address questions regarding this synopsitation to Jason M. Hardman at (614) 701-4803 or via e-mail at jason.m.hardman.civ@mail.mil. Furnish quotes to this POC on or before the closing time listed in this RFQ. DFAS reserves the right to accept a late quote if the late quote would not unduly delay the acquisition and the contracting officer makes the determination that it is in the best interests of the Government to accept the "late" quote. This language takes precedence over 52.212-1(f) STATEMENT OF WORK (SOW) Maintenance for 27 Hewlett-Packard Network PrintersforDefense Finance and Accounting Service (DFAS) Cleveland 1.0 SCOPE: Establish a Service and Maintenance contract for 27 Hewlett-Packard Network Printers. 2.0 PERIOD OF PERFORMANCE: The period of performance will be one year with the start date being the date of contract award with three one year Options. 3.0 Place of Performance: DFAS-Cleveland, 1240 E. Ninth St., Cleveland, OH 44199-2055 4.0 Service Requirements: 4.1 Provide Service and Maintenance of printers to include the replacement of all non-consumable parts. Recycled parts are acceptable. Consumable parts are toner, maintenance kits, fuser kits, and transfer kits. All other parts are non-consumable parts. 4.2 Complete repairs within 40 business hours of the initial notification. Ensure that the printer is in operational condition prior to the technician departing. If repairs cannot be completed in 40 business of the initial notification, a replacement printer will be required. The Contractor is required to deliver a replacement printer within 70 business hours of the initial notification. 4.3 All Maintenance must be performed onsite at DFAS-Cleveland, 1240 E. Ninth St., Cleveland, OH 44199-2055 4.4 Next Business Day Service Response is required for all maintenance and service requests. 4.5 Yearly routine maintenance must be performed on all printers to include:4.5.1 Wiping down the exterior4.5.2 Cleaning the Feed Roller (Inside the paper tray)4.5.3 Cleaning the Feed Roller (Inside the Printer)4.5.4 Dusting inside the Toner area4.5.5 Cleaning the Duplex feed Rollers4.5.6 Cleaning the Offset Tray Feed Rollers4.5.7 Twenty Seven printers will require the yearly routine maintenance within 120 days after contract award. 4.6 Perform all Firmware updates when required for repair. 4.7 DFAS Cleveland uses remanufactured and compatible toner cartridges. The maintenance agreement cannot restrict the type of consumable parts to OEM brand consumable parts. 4.8 The Serial Numbers of the printer covered by this maintenance agreement are listed on the attachment one. 5.0 The contract is a firm -fixed price contract. 5.1 The contract price includes an unlimited amount of service upon a machine within the contract period. 6.0 Contracting Officer Representative (COR): The COR will act as the on-site technical point of the contract. They will initiate requires and monitor performance. The COR's authority is limited to technical issues and he/she is not authorized to make contractual decisions. The authority to resolve monetary issues and contractual interpretation is the responsibility of the Contracting Officer. The Contracting Officer Representative (COR) for this order is listed below: Terry CashContracting Officer Representative Management Support SpecialistDFAS Cleveland1240 E. Ninth St, Room 989Phone # 216-204-7053Fax # 216-522-5132Email terry.l.cash6.civ@mail.mil 7.0 Security Search: All contractor personnel, their vehicles, and other property entering, leaving, and while within the confines of DFAS, shall be subject to search/inspection. 8.0 Non-Smoking Facilities: All Government facilities are NON-SMOKING facilities. All Contractor personnel and visitors shall smoke in designated smoking areas only. 9.0 INVOICES: Payment will be in accordance with the Prompt Payment Act. Invoices will include contract number, invoice number, and date. Invoices will be submitted to the COR/GPOC (Acceptor) as a 2-in-1 or Combo invoice via the internet using the Government provided Wide Area Work Flow (WAWF) Receiving/Acceptance System at https://wawf.eb.mil. (Reference clause 252.232.7003). When the 2-in-a or Combo invoice is received by the COR/GPOC via WAWF, the COR/GPOC will review the document and if it is correct, accept it electronically and forward it payment. Web Base Training is available at www.wawftraining.com and for more information go to www.dod.mil/dfas and click the e-commerce link. All other questions regarding training and gaining access to the WAWF should be discussed with the COR/GPOC.     WD 05-2415 (Rev.-16) was first posted on www.wdol.gov on 01/05/2016************************************************************************************REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABORTHE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATIONBy direction of the Secretary of Labor | WAGE AND HOUR DIVISION| WASHINGTON D.C. 20210|||| Wage Determination No.: 2005-2415Daniel W. Simms Division of | Revision No.: 16Director Wage Determinations| Date Of Revision: 12/29/2015_______________________________________|____________________________________________Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 forcalendar year 2016 applies to all contracts subject to the Service ContractAct for which the solicitation was issued on or after January 1, 2015. If thiscontract is covered by the EO, the contractor must pay all workers in anyclassification listed on this wage determination at least $10.15 per hour (orthe applicable wage rate listed on this wage determination, if it is higher)for all hours spent performing on the contract in calendar year 2016. The EOminimum wage rate will be adjusted annually. Additional information oncontractor requirements and worker protections under the EO is available atwww.dol.gov/whd/govcontracts.____________________________________________________________________________________State: Ohio Area: Ohio Counties of Ashland, Ashtabula, Cuyahoga, Erie, Geauga, Huron, Lake,Lorain, Medina, Portage, Richland, Stark, Summit, Wayne____________________________________________________________________________________**Fringe Benefits Required Follow the Occupational Listing**OCCUPATION CODE - TITLE FOOTNOTE RATE01000 - Administrative Support And Clerical Occupations01011 - Accounting Clerk I 14.2101012 - Accounting Clerk II 15.9001013 - Accounting Clerk III 17.7201020 - Administrative Assistant 21.2201040 - Court Reporter 16.9901051 - Data Entry Operator I 13.4201052 - Data Entry Operator II 15.4301060 - Dispatcher, Motor Vehicle 20.7601070 - Document Preparation Clerk 13.7201090 - Duplicating Machine Operator 13.7201111 - General Clerk I 13.4601112 - General Clerk II 14.8701113 - General Clerk III 16.6501120 - Housing Referral Assistant 19.3101141 - Messenger Courier 11.1301191 - Order Clerk I 13.1801192 - Order Clerk II 15.0301261 - Personnel Assistant (Employment) I 16.0001262 - Personnel Assistant (Employment) II 17.8901263 - Personnel Assistant (Employment) III 19.9501270 - Production Control Clerk 18.9601280 - Receptionist 13.9701290 - Rental Clerk 15.4801300 - Scheduler, Maintenance 14.7201311 - Secretary I 14.7201312 - Secretary II 17.0501313 - Secretary III 18.6901320 - Service Order Dispatcher 18.8401410 - Supply Technician 21.2201420 - Survey Worker 15.1001531 - Travel Clerk I 12.6101532 - Travel Clerk II 13.5401533 - Travel Clerk III 14.5201611 - Word Processor I 14.4701612 - Word Processor II 16.2501613 - Word Processor III 18.1805000 - Automotive Service Occupations05005 - Automobile Body Repairer, Fiberglass 20.3305010 - Automotive Electrician 19.6705040 - Automotive Glass Installer 18.9205070 - Automotive Worker 18.9205110 - Mobile Equipment Servicer 17.2705130 - Motor Equipment Metal Mechanic 20.3305160 - Motor Equipment Metal Worker 18.9205190 - Motor Vehicle Mechanic 20.3305220 - Motor Vehicle Mechanic Helper 16.5005250 - Motor Vehicle Upholstery Worker 18.0705280 - Motor Vehicle Wrecker 18.9205310 - Painter, Automotive 19.6705340 - Radiator Repair Specialist 18.9205370 - Tire Repairer 15.8905400 - Transmission Repair Specialist 20.3307000 - Food Preparation And Service Occupations07010 - Baker 12.0807041 - Cook I 10.7207042 - Cook II 12.0807070 - Dishwasher 9.2807130 - Food Service Worker 9.2807210 - Meat Cutter 14.3407260 - Waiter/Waitress 9.9409000 - Furniture Maintenance And Repair Occupations09010 - Electrostatic Spray Painter 20.6009040 - Furniture Handler 13.8909080 - Furniture Refinisher 20.6009090 - Furniture Refinisher Helper 15.7109110 - Furniture Repairer, Minor 17.2209130 - Upholsterer 20.6011000 - General Services And Support Occupations11030 - Cleaner, Vehicles 11.7811060 - Elevator Operator 11.7811090 - Gardener 14.1911122 - Housekeeping Aide 12.0611150 - Janitor 12.0611210 - Laborer, Grounds Maintenance 11.3211240 - Maid or Houseman 9.5611260 - Pruner 11.5211270 - Tractor Operator 12.6511330 - Trail Maintenance Worker 11.3211360 - Window Cleaner 12.7312000 - Health Occupations12010 - Ambulance Driver 15.9912011 - Breath Alcohol Technician 16.8712012 - Certified Occupational Therapist Assistant 23.8912015 - Certified Physical Therapist Assistant 23.1012020 - Dental Assistant 15.3412025 - Dental Hygienist 33.6712030 - EKG Technician 22.1512035 - Electroneurodiagnostic Technologist 25.6412040 - Emergency Medical Technician 15.9912071 - Licensed Practical Nurse I 17.5112072 - Licensed Practical Nurse II 19.6812073 - Licensed Practical Nurse III 21.8412100 - Medical Assistant 13.8212130 - Medical Laboratory Technician 18.3012160 - Medical Record Clerk 13.7112190 - Medical Record Technician 15.1312195 - Medical Transcriptionist 14.8612210 - Nuclear Medicine Technologist 31.2912221 - Nursing Assistant I 9.8112222 - Nursing Assistant II 10.8812223 - Nursing Assistant III 12.0412224 - Nursing Assistant IV 13.5112235 - Optical Dispenser 16.6512236 - Optical Technician 14.9712250 - Pharmacy Technician 14.6512280 - Phlebotomist 13.7112305 - Radiologic Technologist 25.1112311 - Registered Nurse I 22.8512312 - Registered Nurse II 27.7112313 - Registered Nurse II, Specialist 27.7112314 - Registered Nurse III 33.5212315 - Registered Nurse III, Anesthetist 33.5212316 - Registered Nurse IV 40.1812317 - Scheduler (Drug and Alcohol Testing) 22.9813000 - Information And Arts Occupations13011 - Exhibits Specialist I 20.5813012 - Exhibits Specialist II 23.9613013 - Exhibits Specialist III 28.5513041 - Illustrator I 20.3513042 - Illustrator II 25.2113043 - Illustrator III 30.8313047 - Librarian 29.4113050 - Library Aide/Clerk 13.2813054 - Library Information Technology Systems 22.30Administrator13058 - Library Technician 17.1713061 - Media Specialist I 16.0913062 - Media Specialist II 18.0113063 - Media Specialist III 20.0713071 - Photographer I 15.9013072 - Photographer II 18.0113073 - Photographer III 22.3013074 - Photographer IV 26.9413075 - Photographer V 32.5913110 - Video Teleconference Technician 17.4114000 - Information Technology Occupations14041 - Computer Operator I 15.1214042 - Computer Operator II 16.9214043 - Computer Operator III 18.8914044 - Computer Operator IV 22.6414045 - Computer Operator V 25.0614071 - Computer Programmer I 22.1314072 - Computer Programmer II 27.2014073 - Computer Programmer III (see 1)14074 - Computer Programmer IV (see 1)14101 - Computer Systems Analyst I (see 1)14102 - Computer Systems Analyst II (see 1)14103 - Computer Systems Analyst III (see 1)14150 - Peripheral Equipment Operator 15.1214160 - Personal Computer Support Technician 22.6415000 - Instructional Occupations15010 - Aircrew Training Devices Instructor (Non-Rated) 28.5315020 - Aircrew Training Devices Instructor (Rated) 35.3515030 - Air Crew Training Devices Instructor (Pilot) 41.3815050 - Computer Based Training Specialist / Instructor 30.2315060 - Educational Technologist 29.5715070 - Flight Instructor (Pilot) 41.3815080 - Graphic Artist 22.5415090 - Technical Instructor 19.9115095 - Technical Instructor/Course Developer 24.3615110 - Test Proctor 16.9815120 - Tutor 16.9816000 - Laundry, Dry-Cleaning, Pressing And Related Occupations16010 - Assembler 9.2816030 - Counter Attendant 9.2816040 - Dry Cleaner 11.5616070 - Finisher, Flatwork, Machine 9.2816090 - Presser, Hand 9.2816110 - Presser, Machine, Drycleaning 9.2816130 - Presser, Machine, Shirts 9.2816160 - Presser, Machine, Wearing Apparel, Laundry 9.2816190 - Sewing Machine Operator 12.3316220 - Tailor 13.0916250 - Washer, Machine 10.0419000 - Machine Tool Operation And Repair Occupations19010 - Machine-Tool Operator (Tool Room) 22.0219040 - Tool And Die Maker 26.6921000 - Materials Handling And Packing Occupations21020 - Forklift Operator 16.7121030 - Material Coordinator 18.9621040 - Material Expediter 18.9621050 - Material Handling Laborer 13.5021071 - Order Filler 13.6921080 - Production Line Worker (Food Processing) 16.7121110 - Shipping Packer 16.7221130 - Shipping/Receiving Clerk 16.7221140 - Store Worker I 14.3921150 - Stock Clerk 18.8721210 - Tools And Parts Attendant 16.7121410 - Warehouse Specialist 16.7123000 - Mechanics And Maintenance And Repair Occupations23010 - Aerospace Structural Welder 24.0023021 - Aircraft Mechanic I 22.8623022 - Aircraft Mechanic II 24.0023023 - Aircraft Mechanic III 24.9323040 - Aircraft Mechanic Helper 18.5523050 - Aircraft, Painter 22.1023060 - Aircraft Servicer 20.3223080 - Aircraft Worker 21.2723110 - Appliance Mechanic 20.4023120 - Bicycle Repairer 15.8923125 - Cable Splicer 24.1323130 - Carpenter, Maintenance 22.3923140 - Carpet Layer 21.3623160 - Electrician, Maintenance 28.3423181 - Electronics Technician Maintenance I 20.2523182 - Electronics Technician Maintenance II 21.2123183 - Electronics Technician Maintenance III 26.6523260 - Fabric Worker 18.9723290 - Fire Alarm System Mechanic 21.7723310 - Fire Extinguisher Repairer 17.8423311 - Fuel Distribution System Mechanic 27.5523312 - Fuel Distribution System Operator 22.5723370 - General Maintenance Worker 18.1323380 - Ground Support Equipment Mechanic 22.8623381 - Ground Support Equipment Servicer 20.3223382 - Ground Support Equipment Worker 21.2723391 - Gunsmith I 17.8423392 - Gunsmith II 20.0923393 - Gunsmith III 21.7723410 - Heating, Ventilation And Air-Conditioning 20.68Mechanic23411 - Heating, Ventilation And Air Contditioning 21.50Mechanic (Research Facility)23430 - Heavy Equipment Mechanic 20.3823440 - Heavy Equipment Operator 23.8523460 - Instrument Mechanic 23.3223465 - Laboratory/Shelter Mechanic 21.0423470 - Laborer 13.2323510 - Locksmith 20.6023530 - Machinery Maintenance Mechanic 22.7323550 - Machinist, Maintenance 21.7723580 - Maintenance Trades Helper 16.0523591 - Metrology Technician I 25.6523592 - Metrology Technician II 26.6723593 - Metrology Technician III 27.5923640 - Millwright 28.8223710 - Office Appliance Repairer 21.0423760 - Painter, Maintenance 21.7423790 - Pipefitter, Maintenance 26.9623810 - Plumber, Maintenance 23.6623820 - Pneudraulic Systems Mechanic 21.7723850 - Rigger 21.7823870 - Scale Mechanic 20.0923890 - Sheet-Metal Worker, Maintenance 23.0923910 - Small Engine Mechanic 19.8223931 - Telecommunications Mechanic I 24.7023932 - Telecommunications Mechanic II 25.5823950 - Telephone Lineman 20.8323960 - Welder, Combination, Maintenance 19.3623965 - Well Driller 21.3023970 - Woodcraft Worker 21.7723980 - Woodworker 16.4524000 - Personal Needs Occupations24570 - Child Care Attendant 12.2524580 - Child Care Center Clerk 15.2924610 - Chore Aide 9.4324620 - Family Readiness And Support Services 12.91Coordinator24630 - Homemaker 17.2325000 - Plant And System Operations Occupations25010 - Boiler Tender 23.5725040 - Sewage Plant Operator 21.2925070 - Stationary Engineer 23.5725190 - Ventilation Equipment Tender 18.0625210 - Water Treatment Plant Operator 21.2927000 - Protective Service Occupations27004 - Alarm Monitor 16.1527007 - Baggage Inspector 11.2827008 - Corrections Officer 21.7327010 - Court Security Officer 23.1127030 - Detection Dog Handler 16.3127040 - Detention Officer 21.7327070 - Firefighter 22.6027101 - Guard I 11.2827102 - Guard II 16.3127131 - Police Officer I 25.0327132 - Police Officer II 27.8028000 - Recreation Occupations28041 - Carnival Equipment Operator 11.1228042 - Carnival Equipment Repairer 11.6328043 - Carnival Equpment Worker 9.1728210 - Gate Attendant/Gate Tender 13.1728310 - Lifeguard 11.3428350 - Park Attendant (Aide) 14.7428510 - Recreation Aide/Health Facility Attendant 10.7528515 - Recreation Specialist 16.9828630 - Sports Official 11.7328690 - Swimming Pool Operator 18.6229000 - Stevedoring/Longshoremen Occupational Services29010 - Blocker And Bracer 21.0429020 - Hatch Tender 21.0429030 - Line Handler 21.0429041 - Stevedore I 19.8529042 - Stevedore II 21.6130000 - Technical Occupations30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 37.1930011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.6430012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 28.2530021 - Archeological Technician I 15.0430022 - Archeological Technician II 15.0330023 - Archeological Technician III 20.8530030 - Cartographic Technician 25.3430040 - Civil Engineering Technician 21.3630061 - Drafter/CAD Operator I 18.1430062 - Drafter/CAD Operator II 20.4630063 - Drafter/CAD Operator III 22.8130064 - Drafter/CAD Operator IV 28.0730081 - Engineering Technician I 16.7030082 - Engineering Technician II 18.7530083 - Engineering Technician III 20.9830084 - Engineering Technician IV 25.9930085 - Engineering Technician V 31.7830086 - Engineering Technician VI 38.4630090 - Environmental Technician 23.3430210 - Laboratory Technician 22.8130240 - Mathematical Technician 25.3230361 - Paralegal/Legal Assistant I 18.7230362 - Paralegal/Legal Assistant II 23.3430363 - Paralegal/Legal Assistant III 30.3330364 - Paralegal/Legal Assistant IV 36.7030390 - Photo-Optics Technician 25.3430461 - Technical Writer I 25.1230462 - Technical Writer II 29.2530463 - Technical Writer III 30.2030491 - Unexploded Ordnance (UXO) Technician I 23.6430492 - Unexploded Ordnance (UXO) Technician II 28.6030493 - Unexploded Ordnance (UXO) Technician III 34.2830494 - Unexploded (UXO) Safety Escort 23.6430495 - Unexploded (UXO) Sweep Personnel 23.6430620 - Weather Observer, Combined Upper Air Or (see 2) 23.15Surface Programs30621 - Weather Observer, Senior (see 2) 25.3431000 - Transportation/Mobile Equipment Operation Occupations31020 - Bus Aide 13.8231030 - Bus Driver 18.4231043 - Driver Courier 15.3731260 - Parking and Lot Attendant 8.7431290 - Shuttle Bus Driver 16.4231310 - Taxi Driver 10.3231361 - Truckdriver, Light 16.4231362 - Truckdriver, Medium 19.0531363 - Truckdriver, Heavy 23.7031364 - Truckdriver, Tractor-Trailer 23.7099000 - Miscellaneous Occupations99030 - Cashier 10.6799050 - Desk Clerk 11.1499095 - Embalmer 24.5799251 - Laboratory Animal Caretaker I 11.5499252 - Laboratory Animal Caretaker II 12.3399310 - Mortician 33.3199410 - Pest Controller 14.9599510 - Photofinishing Worker 13.4599710 - Recycling Laborer 16.6399711 - Recycling Specialist 18.6099730 - Refuse Collector 15.2299810 - Sales Clerk 12.2499820 - School Crossing Guard 10.9999830 - Survey Party Chief 20.2799831 - Surveying Aide 11.5699832 - Surveying Technician 17.3699840 - Vending Machine Attendant 13.4299841 - Vending Machine Repairer 15.3999842 - Vending Machine Repairer Helper 13.42   ____________________________________________________________________________________ ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS: HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month VACATION: 2 weeks paid vacation after 1 year of service with a contractor orsuccessor; 3 weeks after 5 years, and 4 weeks after 15 years. Length of serviceincludes the whole span of continuous service with the present contractor orsuccessor, wherever employed, and with the predecessor contractors in theperformance of similar work at the same Federal facility. (Reg. 29 CFR 4.173) HOLIDAYS: A minimum of ten paid holidays per year, New Year's Day, Martin LutherKing Jr's Birthday, Washington's Birthday, Memorial Day, Independence Day, LaborDay, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (Acontractor may substitute for any of the named holidays another day off with pay inaccordance with a plan communicated to the employees involved.) (See 29 CFR 4174)   THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING: 1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination doesnot apply to any employee who individually qualifies as a bona fide executive,administrative, or professional employee as defined in 29 C.F.R. Part 541. Becausemost Computer System Analysts and Computer Programmers who are compensated at a ratenot less than $27.63 (or on a salary or fee basis at a rate not less than $455 perweek) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.400) wage rates may not be listed on this wage determination for all occupationswithin those job families. In addition, because this wage determination may notlist a wage rate for some or all occupations within those job families if the surveydata indicates that the prevailing wage rate for the occupation equals or exceeds$27.63 per hour conformances may be necessary for certain nonexempt employees. Forexample, if an individual employee is nonexempt but nevertheless performs dutieswithin the scope of one of the Computer Systems Analyst or Computer Programmeroccupations for which this wage determination does not specify an SCA wage rate,then the wage rate for that employee must be conformed in accordance with theconformance procedures described in the conformance note included on this wagedetermination. Additionally, because job titles vary widely and change quickly in the computerindustry, job titles are not determinative of the application of the computerprofessional exemption. Therefore, the exemption applies only to computer employeeswho satisfy the compensation requirements and whose primary duty consists of:(1) The application of systems analysis techniques and procedures, includingconsulting with users, to determine hardware, software or system functionalspecifications;(2) The design, development, documentation, analysis, creation, testing ormodification of computer systems or programs, including prototypes, based on andrelated to user or system design specifications;(3) The design, documentation, testing, creation or modification of computerprograms related to machine operating systems; or(4) A combination of the aforementioned duties, the performance of whichrequires the same level of skills. (29 C.F.R. 541.400). 2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If youwork at night as part of a regular tour of duty, you will earn a night differentialand receive an additional 10% of basic pay for any hours worked between 6pm and 6am.If you are a full-time employed (40 hours a week) and Sunday is part of yourregularly scheduled workweek, you are paid at your rate of basic pay plus a Sundaypremium of 25% of your basic rate for each hour of Sunday work which is not overtime(i.e. occasional work on Sunday outside the normal tour of duty is consideredovertime work). HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employeesemployed in a position that represents a high degree of hazard when working with orin close proximity to ordinance, explosives, and incendiary materials. Thisincludes work such as screening, blending, dying, mixing, and pressing of sensitiveordance, explosives, and pyrotechnic compositions such as lead azide, black powderand photoflash powder. All dry-house activities involving propellants or explosives.Demilitarization, modification, renovation, demolition, and maintenance operationson sensitive ordnance, explosives and incendiary materials. All operationsinvolving regrading and cleaning of artillery ranges. A 4 percent differential is applicable to employees employed in a position thatrepresents a low degree of hazard when working with, or in close proximity toordance, (or employees possibly adjacent to) explosives and incendiary materialswhich involves potential injury such as laceration of hands, face, or arms of theemployee engaged in the operation, irritation of the skin, minor burns and thelike; minimal damage to immediate or adjacent work area or equipment being used.All operations involving, unloading, storage, and hauling of ordance, explosive, andincendiary ordnance material other than small arms ammunition. These differentialsare only applicable to work that has been specifically designated by the agency forordance, explosives, and incendiary material differential pay. OCCUPATION NOTES: Refuse Collector: The rate for the Refuse Collector occupation applies does notapply to Cuyahoga County. See Wage Determination 1966-0048 for the wage rates andfringe benefits for Cuyahoga County. ** UNIFORM ALLOWANCE ** If employees are required to wear uniforms in the performance of this contract(either by the terms of the Government contract, by the employer, by the state orlocal law, etc.), the cost of furnishing such uniforms and maintaining (bylaundering or dry cleaning) such uniforms is an expense that may not be borne by anemployee where such cost reduces the hourly rate below that required by the wagedetermination. The Department of Labor will accept payment in accordance with thefollowing standards as compliance: The contractor or subcontractor is required to furnish all employees with anadequate number of uniforms without cost or to reimburse employees for the actualcost of the uniforms. In addition, where uniform cleaning and maintenance is madethe responsibility of the employee, all contractors and subcontractors subject tothis wage determination shall (in the absence of a bona fide collective bargainingagreement providing for a different amount, or the furnishing of contraryaffirmative proof as to the actual cost), reimburse all employees for such cleaningand maintenance at a rate of $3.35 per week (or $.67 cents per day). However, inthose instances where the uniforms furnished are made of "wash and wear"materials, may be routinely washed and dried with other personal garments, and donot require any special treatment such as dry cleaning, daily washing, or commerciallaundering in order to meet the cleanliness or appearance standards set by the termsof the Government contract, by the contractor, by law, or by the nature of the work,there is no requirement that employees be reimbursed for uniform maintenance costs. ** NOTES APPLYING TO THIS WAGE DETERMINATION ** Under the policy and guidance contained in All Agency Memorandum No. 159, the Wageand Hour Division does not recognize, for section 4(c) purposes, prospective wagerates and fringe benefit provisions that are effective only upon such contingenciesas "approval of Wage and Hour, issuance of a wage determination, incorporation ofthe wage determination in the contract, adjusting the contract price, etc." (Therelevant CBA section) in the collective bargaining agreement between (the parties)contains contingency language that Wage and Hour does not recognize as reflecting"arm's length negotiation" under section 4(c) of the Act and 29 C.F.R. 5.11(a)of the regulations. This wage determination therefore reflects the actual CBA wagerates and fringe benefits paid under the predecessor contract. The duties of employees under job titles listed are those described in the"Service Contract Act Directory of Occupations", Fifth Edition, April 2006,unless otherwise indicated. Copies of the Directory are available on the Internet. Alinks to the Directory may be found on the WHD home page at http://www.dol.gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site athttp://wdol.gov/. REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form1444 (SF 1444)} Conformance Process: The contracting officer shall require that any class of service employee which isnot listed herein and which is to be employed under the contract (i.e., the work tobe performed is not performed by any classification listed in the wagedetermination), be classified by the contractor so as to provide a reasonablerelationship (i.e., appropriate level of skill comparison) between such unlistedclassifications and the classifications listed in the wage determination. Suchconformed classes of employees shall be paid the monetary wages and furnished thefringe benefits as are determined. Such conforming process shall be initiated bythe contractor prior to the performance of contract work by such unlisted class(es)of employees. The conformed classification, wage rate, and/or fringe benefits shallbe retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)}When multiple wage determinations are included in a contract, a separate SF 1444should be prepared for each wage determination to which a class(es) is to beconformed. The process for preparing a conformance request is as follows: 1) When preparing the bid, the contractor identifies the need for a conformedoccupation(s) and computes a proposed rate(s). 2) After contract award, the contractor prepares a written report listing in orderproposed classification title(s), a Federal grade equivalency (FGE) for eachproposed classification(s), job description(s), and rationale for proposed wagerate(s), including information regarding the agreement or disagreement of theauthorized representative of the employees involved, or where there is no authorizedrepresentative, the employees themselves. This report should be submitted to thecontracting officer no later than 30 days after such unlisted class(es) of employeesperforms any contract work. 3) The contracting officer reviews the proposed action and promptly submits a reportof the action, together with the agency's recommendations and pertinentinformation including the position of the contractor and the employees, to the Wageand Hour Division, Employment Standards Administration, U.S.
  • 1