The subject of the public contract is a contract for the provision of performance, which is to deliver the test stand test, which consists of the test frame with accessories, hydraulic power unit with water-cooled, two motors 1,000 kN and 400 kN, control electronics and accessories. The equipment will be used in the test hall building the Experimental Centre (EXC).
The subject of the public contract is the modernization of electrostatic precipitators at the agglomeration north. It will be made for upgrading existing electrostatic precipitators, which are already 20 years old and therefore outdated and worn. Modernized will internals EO, supply and management. Electrostatic modernization will reduce the consumption of electrical energy for their operation and EO is adjusted so that the vacuum sintering belts may in the future operate with a higher vacuum than it is now. The selected contractor will design and deliver technological equipment and components for modernization projects. The supplier also draw up project documentation, which will be used for the installation of the supplied technology for dismantling work and subsequent operation. Technology supplier will provide supervision during erection, dismantling and commissioning. Selecting a supplier of assembly and disassembly, repair and reinforcement pipe (not the subject of this tender procedure) is performed later only on the basis of other independent technical conditions and according to the project documentation developed by the vendor of choice for technology modernization. A detailed description of the subject of a detailed technical specification in the tender dossier and its annexes.