Call +44 800 9755 164

Public tenders for industrial in Czech Republic

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!
IndustrialCzech Republic

Industrial machinery

Mora Moravia, s.r.o. | Published December 22, 2016  -  Deadline February 27, 2017
cpvs
42000000

Rychločistitelná paint booth.

Industrial machinery

Volfířov, a.s. | Published January 25, 2017  -  Deadline February 27, 2017
cpvs
42000000

The deliverable limit public contract is the delivery of technology-harvest lines including installation.

Technical specifications of supply / technology

Purifier

- Max. Fling dust in m3 to 10 mg / m3 (wheat);

- Fabric filter, tied to the capture of unusable waste from the purification process;

38 t / h;

- Closed mesh box with a circular motion (not rotary);

- Minimum 11 m2 area network;

- Automatic control of material flow inside the machine;

- Recirculated air technology;

2800 m3 / h;

- Max. Height of 3.1 m machine.

drying

- Max. Fling dust in m3 to 10 mg / m3 of the aspiration system of the circulating conveyor (wheat);

-, Tied filter for capture of dust particles exiting the aspiration circulating conveyor dryer, air flow into the filter 1000 m3 / h;

- Dehumidification feed wheat of 19% moisture at 15% - dryer performance min 210.0 tons / 24 hours (at a volumetric wt. Grain 780 kg / m3);

- Reducing moisture corn from 35% to 15% moisture - dryer performance min 105 t / hr (at a volumetric wt. Grain 780 kg / m3);

48,000 m3 / h;

- Min. Capacity driers 23 t (maize);

1700 kW;

- Minimum power radial fan drying 37 kW;

- Part of the drying filling / emptying circulating conveyor with a min. output of 38 t / h;

- Programmable automatic drying process;

- Working bodies of the dryer of material resistant to the conditions during drying. (Need to authenticate a certificate for grade aluminum material);

- The possibility of using mobile moving energy resource (chassis with wheels and towing equipment);

4m.

transport routes

35 t / h (wheat at a volumetric weight. Grain 780 kg / m3);

- New transport routes closed (to prevent drift of dust particles);

- Finish the transport section of the conveyor weatherproof - galvanizing.

Industrial machinery

ZZN Jihlava a.s. | Published January 20, 2017  -  Deadline February 22, 2017
cpvs
42000000

The deliverable limit public contract is the delivery of transport routes to the silo in Jihlava, including related construction works -konkrétně these are openings for ventilation.

Industrial machinery

Centrum výzkumu Řež s.r.o. | Published February 1, 2017  -  Deadline March 6, 2017
cpvs
42000000, 42900000, 38400000, 38424000, 38410000, 42131000, 42122000, 42520000, 44000000, 44600000, 42510000, 44610000, 42418000, 45000000, 45321000, 38553000

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with its terms.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - Solidification equipment.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - Measurement and control for an experimental line.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - Pumps for experimental technological line.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - Ventilation for experimental technological line.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - Storage water heater for experimental technological line.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - heat exchangers and condensers for experimental technological line.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - Plastic tank for anti-foaming agent to experimental technological line.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - Conveyors for bulk materials semi-liquid mixtures and weighing.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - thermal insulation material on the pipe and fitting.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - a magnetic field sensor.

The subject of performance of this contract is the supply of components for the line ETL in scope and compliance with the terms - Seperačn ...

Industrial machinery

Volfířov, a.s. | Published February 2, 2017  -  Deadline February 27, 2017
cpvs
42000000

The deliverable limit public contract is the delivery of technology-harvest lines including installation.

Industrial machinery

Dolňácko, a.s. | Published February 3, 2017  -  Deadline March 9, 2017
cpvs
42000000

The deliverable limit public contract is the delivery of technology-harvest lines including related construction works.

Performance picking 40 t / h

High-capacity silos with flat bottom - 3 pieces:

Sila will be equipped with ladders and walkways so as to allow easy control of the upper silo service entrance.

- The amount of galvanizing at least 350 mg / m²,

- Continuous filling the silo,

- Thermometric curtain

- Aerated floor area of ​​about 30% with perforation of all forces to rape,

1330 m³

- 9.2 m diameter silos,

- Max. Height 22.1 m silo,

- Aeration fans,

- Anti-condensation fan of min. vacuum of 300 mbar and min. air volume 1400 m³ / hr.

Capacity forces it to wheat in specific gravity 0.78 t / m³.

High-capacity silos with flat bottom - 2 pieces:

Sila will be equipped with ladders and walkways so as to allow easy control of the upper silo service entrance.

- The amount of galvanizing at least 350 mg / m²

- Continuous filling the silo,

- Thermometric curtain

- Aerated floor area of ​​about 30% with perforation of all forces to rape,

Industrial robots

Západočeská univerzita v Plzni | Published February 11, 2017
cpvs
42997300

Robotic workstation is designed for full machining and dimensional diagnostic surface of non-ferrous workpieces and parts, in particular for machining composite and plastic materials, but also aluminum alloys and materials with similar machinability. The delivery must be necessary construction work on site.

Robotic workstation is designed for full machining and dimensional diagnostic surface of non-ferrous workpieces and parts, in particular for machining composite and plastic materials, but also aluminum alloys and materials with similar machinability. The delivery must be necessary construction work on site. Robotic workstation is fully equipped and designed primarily for educational purposes. It will also be used for the purpose of resolving the research tasks and procurement contract research. In the workplace, the machine will be especially complex shaped workpieces and components of non-ferrous materials including dusty and unhealthy. For this reason, it must comply with workplace safety and environmental requirements. In addition to cutting there will be a robotic non-contact measurements in the form of reverse engineering. Part of the workplace must be a base for robot programming and facilities for both students and operator workplace.

Industrial machinery

Metaz Týnec a.s. | Published February 11, 2017  -  Deadline February 21, 2017
cpvs
42000000

4.5 The subject of public procurement is a modification of the existing steel foundry to improve the environmental performance of operation corresponding to contemporary standards. The adjustment includes the supply and installation of new technological equipment in smelting and molding sand mixtures including prep caused by construction work, HVAC and energy installations. Building contracts specifically:

- Adapting the required technical solution of the whole work according to specific equipment supplied,

- Complete project documentation of actual construction, including completion of all necessary permits to operate the new technology,

- Supply works,

- Delivery of equipment,

- Installation,

- Comprehensive testing of the whole work,

- Commissioning.

Industrial machinery

Centrum výzkumu Řež s.r.o. | Published February 9, 2017  -  Deadline March 15, 2017
cpvs
42000000, 42900000, 38400000, 38424000, 38410000, 42131000, 42122000, 42520000, 44000000, 44600000, 42510000, 44610000, 42418000, 45000000, 45321000, 38553000

The subject of performance of this contract is the supply of components for the line ETL in scope and in accordance with its terms.

Industrial machinery

ZZN Jihlava a.s. | Published February 7, 2017  -  Deadline March 13, 2017
cpvs
42000000

The deliverable limit public contract is the delivery of transport routes to the silo in Jihlava, including related construction works -konkrétně these are openings for ventilation.

Industrial site rehabilitation

Diamo, státní podnik | Published January 18, 2017  -  Deadline March 31, 2017
cpvs
90722100, 45110000, 90733900, 90740000, 71351914

The subject of the VZ is the remediation of polluted products historically performed coke industry in Trojického territory in Ostrava (Silesian Ostrava) over an area of ​​approximately 6 hectares. For more details, see the document "Qualification Documentation", published on the profile of the contracting authority (http://www.ppe.cz/v2/profil/diamo/).

Demolition and construction of an industrial building

SPUR a.s. | Published February 1, 2017
cpvs

Industrial control software package

Valiant – TMS Czech s.r.o. | Published February 17, 2017  -  Deadline March 27, 2017
cpvs
48150000

The subject of public procurement is the purchase of software licenses for modeling, simulation and verification of real operation of robotic lines (hereinafter "Solving virtual commissioning"), which in the process outsourcer streamline and accelerate the development and production of robotic lines, particularly the development of new standards and prototypes and their subsequent introduction into operation. More detailed specifications are contained in Section 6 of the tender documentation.

The subject of public procurement is the purchase of software licenses for modeling, simulation and verification of real operation of robotic lines (hereinafter "Solving virtual commissioning"), which in the process outsourcer streamline and accelerate the development and production of robotic lines, particularly the development of new standards and prototypes and their subsequent introduction into operation.

RECONSTRUCTION OF INDUSTRIAL COMPLEX Kostany

LABO Metal s.r.o. | Published January 20, 2017
cpvs

Acquisition of technology for industrial cleaning and VZV

Ormonde Organics International, s.r.o. | Published February 10, 2017
cpvs

Construction work of energy saving measures industrial building

Chropyňská strojírna, a.s. | Published February 8, 2017
cpvs

Reducing the energy intensity of industrial area in the month - Phase II

Q Park Měšice s.r.o. | Published February 2, 2017  -  Deadline February 23, 2017
cpvs
45000000

Centrum industrial research, development and innovation in society PBT Works Ltd.

PBT Works s.r.o. | Published February 13, 2017  -  Deadline March 7, 2017
cpvs
42900000

Centrum industrial research, development and innovation in society PBT Works Ltd. - Stage 1

PBT Works s.r.o. | Published February 13, 2017
cpvs

Construction work - Revitalization of industrial estate firms HOMOLA as, Ostrava - Kunčičky - SO 03, SO 08, SO 11 and SO 13

HOMOLA a.s. | Published February 9, 2017
cpvs