Public tenders for industrial in China

Find all Industrial tenders in the world.
Finding business opportunities has never been easier.

Results for industrial. Make a new search!

RFP on management and technology policies research on ecological design of electric and electronic equipment products in China

UNDP Country Office - CHINA | Published April 26, 2017  -  Deadline May 23, 2017
cpvs

The Stockholm Convention on Persistent Organic Pollutants (Stockholm Convention on POPs) is a global treaty designed to protect human health and the environment from persistent organic pollutants (POPs). On May 23, 2001, the Chinese Government signed the Stockholm Convention as one of the first batch of signatory countries. The Stockholm Convention was entered into force for China since November 11, 2004.In order to fulfill relevant requirements of National Implementation Plan under the Stockholm Convention (NIP), effectively reduce the release of POPs to the environment within the life cycle of electric and electronic equipment products and protect the ecological environment, the Foreign Economic Cooperation Office (FECO) of the Ministry of Environmental Protection collaborated with the United Nations Development Programme (UNDP) on the development of the Global Environment Facility (GEF) Project “Reducing of POPs and PTS release by environmentally sound management throughout the life cycle of electrical and electronic equipment and associated wastes in China”. The planned implementation period of this project is 4 years, and the total budget is $58.65 million, of which the GEF grants is $11.65 million.The FECO, as the National Implementing Agency of this project, is responsible for the overall coordination and management. The project will improve policy standards, strengthen regulatory capacity and carry out the demonstration of ecological design, recycling system and disposal technology and other activities through the whole life cycle analysis of electric and electronic equipment products, thus promoting the perfection of the environmentally sound management system and technical standard system for electric and electronic equipment products in China.The 13th “Five-Year Plan” Proposal adopted at the 5th Plenary Session of the 18th Central Committee of CPC laid the concept of green development as one of its five major development goals in a separate chapter and made key strategic deployment over ecological civilization construction and environmental protection. Chinese Government issued two documents of Opinions on Accelerating the Promotion of Ecological civilization Construction and the Master Plan on Institutional Reform of Ecological Civilization. All these documents defined the notion, principles, targets and tasks for eco-environmental treatment for China during the next five years and even further and have acted as the top-level design and roadmap for China’s ecological civilization construction and green development. In November 2016, the State Council issued the \"13th Five Year Plan for Ecological Environmental Conservation\" as an effective way to realize the reform in the field of ecological civilization and remedy the environmental weakness in building an overall well-off society, requesting to strengthen source prevention and control, lay a solid foundation for green development, promote green manufacturing and the production and supply of green products and push forward supply-side structural reform. In order to implement the supply of green products and push forward supply-side structural reform, the state has issued a series of documents such as the \"Scheme to Implement Extended Producer Responsibility System\" and the \"Opinions on Establishing a Unified System of Green Product Standard, Certification and Labeling\". Thus the implementation of ecological design has become an important means to fulfill the tasks.According to the project design, 6 kinds of electric and electronic equipment products such as television, refrigerators, washing machines, air conditioners, computers and mobile phones in the “Catalog of waste electronic and electric equipment products for treatment (2014)” will be selected during the implementation period of project. By centering on the emission reductions of major persistent organic pollutants and persistent toxic substances (POPs/PTS), energy saving, water saving and recycling and applying product ecological design, the project will explore the management modes and technical routes for reducing the release of pollutants in the whole life cycle of products, support the government to make relevant decisions and enhance the enterprises' ecological design level and green product development capability.2. Category of Ecological Design Ecological design is to systematically consider the influence of all links such as raw material selection, production, sales, use, recovery and processing on resources and environment during the product design and development stages according to the concept of whole life cycle, strive to minimize resource consumption in the whole life cycle of products, use little or no raw materials containing toxic or harmful substances and reduce the pollutants generated and released, thus realizing the activities for environmental protection. Ecological design should consider the following elements (including but not limited to):Minimizing environmental risks: Reduction of environmental risk of chemicals in products, biodegradable materials, waste minimization, and the minimization of environmental release;Maximizing cyclic utilization: Realizing the maximization of product recycling and material regeneration;Efficient green energy and resource utilization: Minimizing the consumption of energy, water, materials and other resources and maximizing the use of green renewable energy in the whole life cycle;The persistence of social responsibility: Realizing the biodiversity conservation and the protection of human civilization/culture, and conforming to the national strategy without losing functionality and convenience.3. Work ObjectivesThe terms of reference has the following main work objectives: It is planned to employ a qualified institution to research domestic and foreign policy and technology experiences on the ecological design of products, analyze 6 kinds of electric and electronic equipment products such as television, refrigerators, washing machines, air conditioners, computers and mobile phones in the “Catalog of waste electronic and electric equipment products for treatment (2014)”, explore the whole life cycle management modes and technical routes by centering on the emission reductions of major POPs/PTS, energy saving, water saving, recycling, complete the suggestion draft on the ecological design guidance for 6 kinds of electric and electronic equipment products and ecological design evaluation system for the manufacturing enterprises of electric and electronic equipment products, guide the enterprises to demonstrate implementation and validation, support the government to make relevant decisions and enhance the enterprises' ecological design level and green product development capability.4. Work ContentsIn order to achieve the objectives determined by the terms of reference, the following activities should be carried out (including but not limited to):1) Carrying out the policy research of domestic and foreign ecological design of electric and electronic equipment products and the implementation effect evaluation Based on literature retrieval and expert meeting, the legislative situation and regulation system on electrical and electronic equipment management in US, EU and other developed countries should be systematically summed up. To research the concept of product ecological design, comb the present development status and development trend of and the management measures for product ecological design in national and international electric and electronic equipment industry, compare the policy environment of and the implementing measures for and the results of implementing the ecological design of electric and electronic equipment products at home and abroad, analyze the gaps and problems concerning China's implementation of the ecological design of electric and electronic equipment products; complete the report on policy research and implementation effect evaluation for the ecological design of electric and electronic equipment products at home and abroad. In order to complete this activity, the following documents should be included but not limited to:European Union eco-design directive and related regulation such as Restriction of Hazardous Substances (RoHS), Enter-related ProductsAmerica Environmental Design of Electrical Equipment Act (EDEE), Electronic Waste Recycling Act China Regulation of restriction on use of harmful substances in electrical and electronic products, China Manufacturing 2025, The 13th Five-Year Plan for Ecological Environment Protection, The Implementation Plan for the Extended Producer Responsibility System, The Opinions on Establishing a Unified Standardization, Certification, and Labeling Framework for Green Products , etc.2) Carrying out detection, analysis and investigation of chemicals in China's electric and electronic equipment products Based on the literature retrieval and investigation, centering on 6 kinds of electric and electronic equipment products such as TV sets, refrigerators, washing machines, air conditioners, computers and mobile phones in the “Catalog of waste electronic and electric equipment products for treatment (2014)” and aiming at POPs, high-risk chemicals listed in the REACH regulation of EU and other state-specified harmful substances that may be contained in these products, the application of chemicals in the printed circuit boards, displayers, shells, coating materials, thermal insulation materials and other components and parts of 6 kinds of main products, and the related information on recourses, energy and economy should be combed preliminarily.Several representative brands and mainstream types of products at the Chinese market (at least 2 kinds of representative products should be selected for each kind of product in the catalog, and 3 product samples should be selected for each representative product) should be selected. According to the application of chemicals in 6 kinds of main products, the POPs, PTS and other priority chemicals of concern in their production process and finished goods should be investigated, sampled, tested and analyzed. The test should include the testing research on the content of at least 6 kinds of chemical substances (including Lead and its compounds, mercury and its compounds, Cadmium and its compounds, Chromium IV compounds, PBB, PBDE) in key components such as electronic circuit boards, displayers, shells, coating materials and thermal insulation materials of the above-mentioned 6 kinds of products.3)Carrying out environmental impact analysis in the whole life cycle of 6 kinds of typical electric and electronic equipment productsBased on the above information, the environment in the links of product use and waste disposal should be simulated so as to test the amount of potential toxic and hazardous material released in the links of product use and waste disposal. Based on the test results, the products' potential risks of chemical release in the links of production, use and waste disposal should be assessed, and the environmental risk assessment report on POPs and toxic and hazardous chemicals in China's electric and electronic equipment products should be compiled and completed.Using the the Life Cycle Assessment (LCA) analysis tool recognized at home and abroad, the basic data on environmental impact should be collected in each link of the product life cycle, the quantitative analysis can be carried out mainly in terms of environment, energy and economic. According to the analysis result, the emphasis and concrete scheme for improving the ecological design of 6 kinds of products can be put forward, and the life cycle assessment report of electric and electronic equipment products can be prepared in China.Consolidating the above information, the research on alternative products and raw materials to POPs, PTS and other priority chemicals of concern in 6 kinds of products should be carried out, the potential of POPs and PTS reduction in the whole life cycle of electric and electronic equipment products should be assessed, combined with energy consumption, economic and other factors, the overall technology roadmap of replacement should be put forward.4) Carrying out the research on ecological design evaluation system and product technical guide for the manufacturing enterprises of electric and electronic equipment products In combination with the development demand for green transformation of China's electric and electronic equipment industry and the results of LCA evaluation and environmental risk assessment, centering on the above 6 kinds of main electric and electronic equipment products, the resources, energy, environment, quality and other factors in the production of electric and electronic equipment products should be considered, in combination with the national standards on eco-smart design, including, inter alia, General Principles for Eco-design Product Assessment, the technical guide for 6 products should be put forward preliminary. In combination with implementation of China pilot projects on eco- design of industrial products, the ecological design evaluation system for the manufacturing enterprises of electric and electronic equipment products should be put forward preliminary.Assist FECO in guiding related enterprises in their product production and design, track the ecological design activities progress of the demonstration enterprises under this project, combining the objectives of The Opinions on Establishing a Unified Standardization, Certification, and Labeling Framework for Green Products, guide the demonstration enterprises under this project to complete the eco-design of electrical and electronic equipment products with less energy-consuming, low pollution emission, low toxicity and less hazardous substance, easy recycling and reuse, high quality and other characters, check and inspect the technical research and development activities of the demonstration enterprises, and put forth suggestions and opinions so as to ensure the technical feasibility of demonstration activities. At the same time, the assessment report on demonstration enterprises' ecological design should be completed.Combined with the activities conducted by the project demonstration enterprises, based on the tracking and empirical evaluation of the ecological design made by pilot enterprises, the above technical guide and ecological design evaluation system should be verified and improved, the evaluation procedure and evaluation methods should be put forward, thus providing a reference for the various enterprises within the industry and improving the ability of ecological design of electric and electronic equipment products in China.Reports on technical guide for ecological design of 6 kinds of products and the research reports on ecological design evaluation system for the manufacturing enterprises of electric and electronic equipment products in China will be formulated, including:The technical guide for ecological design of televisionThe technical guide for ecological design of refrigeratorsThe technical guide for ecological design of washing machinesThe technical guide for ecological design of air conditionersThe technical guide for ecological design of computersThe technical guide for ecological design of mobile phonesThe research report on the evaluation system of ecological design for the manufacturing enterprises of electric and electronic equipment products in China5) Carrying out the study of policy recommendations on ecological design of electric and electronic equipment products in ChinaTo analyze relevant domestic and foreign policies and standars about the design for electrical and electronic equipment production, make strict requirements on the quantity limits of main concentration chemicals in electric and electronic equipment products in China, summarize the development, implementation process and effect of and the existing issues concerning the policy system for legislation and management of product ecological design in China, put forward the countermeasures for China to implement the ecological design of electric and electronic equipment products and formulate, combination with the newly issued and implemented policy and standards on industrial products eco-design, concentrating on development demand for green development of China's electric and electronic equipment industry during the next five years and even further, formulate the draft on policy recommendations for China to implement ecological design and promote its issuance and implementation.6) Completing other related work To summarize the researches on ecological design and the development experience of demonstration enterprises, and compile the book “Research and Application of Ecological Design of Electric and electronic equipment products in China” (in Chinese).To assist and cooperate with the national project team in completing other work relating to ecological design activities and provide technical support, participate in related working conferences under the project on schedule, prepare PPT according to the requirements, as well as make speeches at the meetings; promptly reply relevant questions and suggestions for revision proposed by GEF, UNDP and FECO; and accept the project team's inspection and audit for the completion of work.5. Output ReportAccording to the contents of activities, at least one sealed hard copy and one PDF scanned copy in electronic edition of the following reports should be submitted in written form.1) Detailed implementation plan (in Chinese);2) The report on policy research and implementation effect evaluation for the ecological design of electric and electronic equipment products at home and abroad (both in English and Chinese);3) The environmental risk assessment report on POPs and toxic and hazardous chemicals in China's electric and electronic equipment products (both in English and Chinese)4) The Life Cycle Assessment report for six kinds of electric and electronic equipment products (both in English and Chinese);5) The technical guide for ecological design of six kinds of electric and electronic equipment products (both in English and Chinese);6) The research report on the ecological design index system for the manufacturing enterprises of electric and electronic equipment products in China (both in English and Chinese);7) The draft on policy recommendations for China to implement the ecological design of electric and electronic equipment products (both in English and Chinese);8) The book “Research and Application of Ecological Design of Electric and electronic equipment products in China” (in Chinese)6. Requirements on Consultancy’s Qualification The institution or association that undertakes this consulting service needs to have at least the following qualifications:Should have China Metrology Accreditation (CMA);Undertook the ecological design of industrial products, management of chemical in products and research work in related fields;Being familiar with relevant domestic and foreign documents of policies and regulations and management provisions concerning the ecological design of electric and electronic equipment products, those which undertook related international projects are preferred;Institutions which are familiar with the management provisions of chemicals in industrial products and undertook projects in the field of POPs are preferred;Institutions which have the related experiences on life cycle assessment of products are preferred.Institutions which have the ability to provide relevant state ministries and commissions, local governments and enterprises with decision-making support services are preferred.The core members of project should be composed of the persons with the following qualifications:The project leader should have a PhD degree or the title of a senior professional post or above and at least 5 years of working experience in the fields of the ecological design of electric and electronic equipment products, environmental protection and the chemicals management;Team members shouldn’t less than 12, at least 3 people should have a PhD degree or the title of a senior professional post or above in the environment, chemistry, electronic engineering field and related fields;Being familiar with domestic and foreign provisions related to the ecological design of electric and electronic equipment products/the chemicals management;Those who have the ability to conduct international communication are preferred;Those who are familiar with the requirements of the Stockholm Convention and related research background in the field of POPs in electric and electronic equipment products are preferred. The Proposal submission address is: 710 Room, 5 Houyingfang Hutong, Xicheng District, Beijing, P.R. China Contacts: Suizi Xiao Postal Code: 100035 Proposals must be submitted no later than the following date and time: May 23, 2017

Hunan Technical and Vocational Education and Training Demonstration Project

 | Published December 14, 2016  -  Deadline January 12, 2017
cpvs

Invitation for Bids 1. The People’s Republic of China has received financing from the Asian Development Bank towards the cost of the Hunan Technical and Vocational Education and Training Demonstration Project. Part of this financing will be used for payments under the Contract named above. Bidding is open to Bidders from eligible source countries of ADB. 2. MINMETALS International Tendering Co., Ltd. “the Procurement Agent”, which has been authorized by The Education Department of Hunan Province (the "Purchaser") to act for and on its behalf, invites sealed bids from eligible bidders for supply of the following Goods and related services (Contract name: Hunan Automotive Engineering Vocational College Procurement of Electric Mechanic Skill Training Equipment, Contract No. : HN-QC-E03): No. Description of Goods 1 Hydraulic and PLC equipment 2 Cutting Machine 3 Industrial robot and basic teaching station equipment Detailed schedule of supply is found in Section VI of the Bidding Documents. 3. National Competitive Bidding will be conducted in accordance with ADB’s Single- Stage: One-Envelope Bidding Procedure and is open to all Bidders from eligible countries as described in the Bidding Document. 4. Only eligible Bidders with the following key qualifications should participate in this bidding: (i) Average Annual Turnover: Bidders should have at least three years of operational experience. The average annual turnover for the three years (2013, 2014 and 2015) should be not less than RMB 5.3 million. (ii) Contract Experience: At least one contracts successfully completed as supplier within the last three years. Value, nature, and complexity of these contracts should be comparable to the contract to be let. The contracts’ value must be not less than RMB 1.8 million. Date: 14 December 2016 Loan No. and Title: L3010-PRC: Hunan Technical and Vocational Education and Training Demonstration Project Contract No. and Title: Contract No. : HN-QC-E03 - Hunan Automotive Engineering Vocational College Procurement of Electric Mechanic Skill Training Equipment IFB No.: WKZB1622HNP100223/002 Deadline for Submission of Bids: 12 January 2017; 09:00 A.M. (iii) Technical Experience: Goods offered should have been in production for at least three years. (iv) Production Capacity: For the goods listed, manufacturers shall have the production or supply capacity of at least 3 times the number specified in the List of Goods and Delivery Schedule in Section VI in recent three years (2013, 2014 and 2015). (v) Financial Performance: Soundness of the Bidder’s financial position showing long- term profitability demonstrated through audited annual financial statements (balance sheet, income statement) for the last three years (2013, 2014 and 2015). As a minimum, a Bidder’s net worth calculated as the difference between total assets and total liabilities for each of the three years should be positive. (vi) Cash-flow Capacity: Availability of or access to liquid assets , lines of credit, and other finances sufficient to meet any possible cash flow requirement which may arise during the execution of the contract (This should in appropriate cases also take into account the Bidder’s commitments for other contracts) shall not be less than: CNY0.8 million. (vii) Pending Litigation: All pending litigation shall not surpass more than 50 (fifty) percent (50%) of the Bidder’s net worth. Detailed qualification requirements are found in Section III of the Bidding Document. 5. Interested eligible bidders may obtain further information and inspect the bidding documents during 9:00~ 11:30 and 14:00~16:30 at the address given below. Contact Person: Ms. Xiao; Tel. No.: 0731-85385602; Email Address: 150205741@qq.com. 6. A complete set of bidding documents may be purchased by interested eligible bidders upon the submission of a written application to the address below and upon payment of a nonrefundable fee of RMB 1000. The method of payment will be cashier check, direct deposit to the account specified below. The document will be sent promptly via courier for an additional fee of RMB100 for local delivery as registered mail address. No liability will be accepted for loss or late delivery. Account Name: Minmetals International Tendering Co., Ltd. Bank code: 102100005374 Account No.: 0200053709022105773 Bank Name: Capital Stadium Branch, Beijing, ICBC 7. Bids must be delivered to the address below on or before 9 a.m. January 12, 2017. Late bids will be rejected. Bids will be publicly opened in the presence of the Bidders’ designated representatives and anyone who choose to attend at the address below at 9 a.m. January 12, 2017. All bids must be accompanied by a Bid Security as described in the bidding documents. 8. Any questions or complaints regarding the bidding process or contract award should be sent in writing to the Purchaser to hnzjzz.pzm@163.com. Bidders could also send copies of their communications on issues and questions to the International Financial Institution to zkarimova@adb.org. When the Purchaser does not respond promptly, or the communication is a complaint against the Purchaser, bidders can also write to such institution directly. 9. The addresses referred to above are: Address 1: Address for Inspection and Purchase of Bidding Documents: Procurement Agent: MINMETALS International Tendering Co., Ltd. Postal Address: No.5, Building D, Minmetals Plaza, Sanlihe Road, Haidian District, Beijing / Room 2120, Floor 21, Honglinguoji Plaza, No.266 on section 3 of Furong Road, Tianxin District Changsha City. Contact Person: Ms. Xiao Email Address: 150205741@qq.com Tel. No.: 0731-85385602 Address 2: Address for Bid Submission and Bid Opening: Hunan Bidding and Tendering Centre, No. 29, Wan Jiali South Road, Yuhua District, Changsha, Hunan province.

CN-HaJia Railway - P117341

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published September 2, 2016  -  Deadline October 18, 2016
cpvs

Gsm-r System For Base Station Invitation forBids (IFB) People's Republic of China World Bank Financed Harbin-Jiamusi Railway Project Loan No.: 8347-CN IFB No.: 0772-1610F112FF02 1.      The governmentof P. R. China has received financing from the World Bank toward the cost of Harbin-Jiamusi Railway Project, and intends to apply part of theproceeds toward payments under the Contracts for Procurement (ICB) of GSM-R System for Base Station (Lot No.:CME02). 2.      China Mechanical & Electronic Engineering Tendering Co., Ltd., entrusted by, China Railway Corporation, now invites sealed bids from eligiblebidders for: IFB No. LotNo. Item Unit Quantity Earliest DeliveryDate Latest DeliveryDate 0772-1610F112FF02 CME02 GSM-R System for Base Station Set 82 two month after signing thecontract Three month after signingthe contract 3.       Qualification requirements include: Supply experience, technical, financial, legaland other requirements stipulated in the bidding document; main qualificationrequirements are: For Lot CME02, in the pastfive years,the products to be supplied shallhave the following experience: at least 5 sections of GSM-R system forbase stations (BBU and RRU excluded) shall have been applied on a main railway line with the minimum design speed of 200 km/h whichshall have been in satisfactory operation for at least one year, This requirement can be met by up to three contracts. The Bidders shall furnish copies of the salescontracts and end-user certificate issued by the department of the relevant Railway Bureau ofCRC. 4.       Bidding will be conducted through the InternationalCompetitive Bidding procedures as specified in the World Bank's Guidelines: Procurement of Goods, Works and Non-Consulting Servicesunder IBRD Loans and IDA Credits & Grants by World Bank Borrowers[the edition of Jan.,2011]("Procurement Guidelines"), and isopen to all eligible biddersas defined in Procurement Guidelines. In addition, please refer to paragraphs 1.6 and 1.7 setting forththe World Bank's policy on conflictof interest. 5.       Interested eligible bidders may obtain furtherinformation from China Mechanical & Electronic Engineering Tendering Co., Ltd. and inspect the Bidding Documents at the addressgiven below every day (except for Saturdays, Sundays and public holidays) between 9:00am-11:30am and 13:30pm-16:30pm (BeijingTime). 6.       A complete set of the Bidding Documents in English or Chinese maybe purchased 9:00?11:30 am and 1:30?4:30 pm fromSept.6th, 2016(Weekends and Holidays Excluded) by interested bidders on the submission of a written Application to the address below and uponpayment of a non-refundable fee RMB1000 or in USD160. The method of payment will be in cash or T/T.  RMB200 (mainland China) or USD50 (Outside Mainland China) shall be added for the postage for express mail forpurchasing by mail. No liability will be accepted for loss or late delivery. 7.       Bids must be delivered to the address below on or before,10:30a.m. Oct. 18th, 2016 (Beijing Time).Electronic bidding will not be permitted. Late bids will be rejected.Bids will be publicly opened in thepresence of the bidders' designated representatives and anyone who choose to attend at the address below at 10:30 a.m.Oct.18th, 2016 (Beijing Time). The address for submitting and opening of the Bidthat referred to above is: The bid openning room at Liangxiang bid evaluation area, Beijing City ContructionPurchasing & Contracting Trade Center. No.15 Daotiannanli,Fangshan District, Beijing.ZIP Code: 102442 8.       All bids must be accompanied by a Bid Security of at least 2%of bid price. 9.       Complains, if there is any, can be sent to: gollivier@worldbank.org?jguo@worldbank.org?cmeetc_hajiatl@163.com 10.   The Procurement Agent is: China Mechanical & Electronic Engineering Tendering Co.,Ltd. Address: 14th Floor, Huatong Tower B, No. 19B ChegongzhuangWest Road, Haidian District, Beijing,P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-8801 8619 Attention: Mr. Lin Bing/Ding Jian Electronic mail address:cmeetc_hajiatl@163.com Account for Purchasing Bidding Document(RMB) Account for Purchasing Bidding Document(USD) Account Name:China Mechanical & Electronic EngineeringTendering Co., Ltd. Account Name?China Mechanical & Electronic Engineering TenderingCo.,Ltd. Bank(RMB): Industrial and Commercial Bank of China, Si DaoKou Branch, Beijing, China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuanSub-Br. Account No.:0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-Zhangjiakou-Hohhot Railway - P122319

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published August 26, 2016  -  Deadline October 11, 2016
cpvs

Ticketing Equipment Invitation for Bids(IFB) People's Republic of China World Bank Financed Zhangjiakou -Hohhot Railway Project Loan No.: 8131-CN IFB No.: 0772-1610F112FF07 1.     The government of P.R. China has received financing from the World Bank toward the cost of Zhangjiakou -Hohhot Railway Project, and intends to apply part of theproceedstoward payments under the Contracts for Procurement (ICB) of Ticketing Equipment(LotNo.:ISE01). 2.     China Mechanical& Electronic Engineering Tendering Co., Ltd., entrusted by, ChinaRailway Corporation, now invites sealed bids from eligible biddersfor: IFB No. LotNo. Item Unit Quantity Earliest Delivery Date LatestDelivery Date 0772-1610F112FF07 ISE01 Ticketing Equipment Set 1 One month after signing thecontract Three month after signing the contract 1.      Qualification requirements include: Supply experience, technical, financial, legaland other requirements stipulated in the bidding document; main qualification requirements are: For Lot ISE01, in the past five years, the products to be suppliedshall have the following experience: at least one set of the ticketing equipment shall have been applied on a main railway line with the minimum design speedof 250km/h which shall have been in satisfactory operation for at least one year. The Bidders shall furnish copies of the salescontracts and end-user certificate issued by the department in charge of the businessof the Railway Bureau ofCRC. 2.      Bidding will be conducted through theInternational Competitive Bidding procedures as specified in the World Bank's Guidelines: Procurement of Goods, Works andNon-Consulting Services under IBRD Loans and IDA Credits& Grants by World Bank Borrowers[the edition of Jan.,2011]("ProcurementGuidelines"), and is open to all eligible bidders as defined inProcurement Guidelines. In addition, please refer to paragraphs 1.6and 1.7 setting forth the World Bank's policy on conflict of interest. 3.      Interested eligible bidders may obtainfurther information from China Mechanical & Electronic Engineering Tendering Co., Ltd. and inspect the Bidding Documents at theaddress given below every day (except for Saturdays, Sundays and public holidays) between 9:00am-11:30am and 13:30pm-16:30pm(Beijing Time). 4.      A complete set of the Bidding Documents inEnglish or Chinese may be purchased 9:00?11:30 am and 1:30?4:30 pm fromAug.30th, 2016 (Weekends and Holidays Excluded) by interested bidders on the submission of a writtenApplication to theaddress below and upon payment of a non-refundable fee RMB1000 or in USD160. The method of payment will be incash or T/T.  RMB200 (mainland China) or USD50 (OutsideMainland China) shall be addedfor the postage for express mail for purchasing by mail. No liability will be accepted for loss or latedelivery. 5.      Bids must be delivered to the address below onor before, 10:30a.m. Oct.11th, 2016 (Beijing Time). Electronic bidding will not be permitted. Late bidswill be rejected. Bids will be publicly opened in the presence of the bidders' designated representatives and anyone who choose toattend atthe address below at 10:30a.m.Oct.11th, 2016 (BeijingTime). The address for submitting andopening of the Bid that referred to above is: The bid openning room at Liangxiang bid evaluation area, Beijing City ContructionPurchasing & Contracting TradeCenter. No.15 Daotiannanli,Fangshan District, Beijing.ZIP Code: 102442 6.      All bids must be accompanied by a Bid Securityof at least 2% of bid price. 7.     Complains, if there is any,can be sent to: mlawrence@worldbank.org?jguo@worldbank.org?cmeetc_zhanghu@163.com 8.      The Procurement Agent is: China Mechanical &Electronic Engineering Tendering Co., Ltd. Address: 14th Floor, Huatong Tower B, No. 19B ChegongzhuangWest Road, Haidian District, Beijing, P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number:86-010-8801 8619 Attention: Mr. Lin Bing/Ding Jian Electronic mail address:cmeetc_zhanghu@163.com Account for Purchasing Bidding Document(RMB) Account for Purchasing Bidding Document(USD) Account Name: China Mechanical &Electronic Engineering Tendering Co., Ltd. Account Name?China Mechanical & Electronic EngineeringTendering Co., Ltd. Bank(RMB): Industrial and Commercial Bankof China, Si Dao Kou Branch, Beijing, China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuanSub-Br. Account No.:0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-Zhangjiakou-Hohhot Railway - P122319

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published June 27, 2016  -  Deadline August 11, 2016
cpvs

2*27.5kv Vacuum Circuit Breaker Invitation for Bids (IFB) People's Republic of China World Bank Financed Zhangjiakou -Hohhot Railway Project Loan No.: 8131-CN IFB No.: 0772-1610F112FF06 1.      The government of P. R. China has received financing from the World Bank toward the cost ofZhangjiakou -Hohhot RailwayProject, and intends to apply part of the proceeds toward payments under the Contracts forProcurement (ICB) of 2*27.5kV Vacuum CircuitBreaker (Lot No.:TRE03). 2.      China Mechanical & Electronic Engineering Tendering Co., Ltd., entrusted by, China Railway Corporation, now invites sealed bids fromeligible biddersfor: IFB No. Lot No. Item Unit Quantity Earliest Delivery Date Latest Delivery Date 0772-1610F112FF06 TRE03 2*27.5kV VacuumCircuit Breaker set 50 Within one month after signing the Contract Within two month after signing the Contract 3.      Qualification requirements include: Supply experience, technical, financial, legal and other requirements stipulated inthe bidding document; main qualification requirements are: For Lot TRE03, in the pastfive years, the products to be supplied shall have the following experience: at least twenty-five sets of 2*27.5kVVacuum Circuit Breaker shall have been applied on a main railway line with the minimum design speed of 250 km/h which shall havebeen in satisfactory operation for atleast one year. This requirement can be met by up to three contracts. The Bidders shall furnish copies of the salescontracts andend-user certificate issued by the department of the relevant Railway Bureau of CRC 4.      Bidding will be conducted through the InternationalCompetitive Bidding procedures as specified in the World Bank's Guidelines: Procurement of Goods, Works and Non-Consulting Servicesunder IBRD Loans and IDA Credits & Grants by World Bank Borrowers[the edition of Jan.,2011]("Procurement Guidelines"), and isopen to all eligible bidders as defined in Procurement Guidelines. In addition, please refer to paragraphs 1.6 and 1.7 settingforth the World Bank's policy on conflict of interest. 5.      Interested eligible bidders may obtain further informationfrom China Mechanical & Electronic Engineering Tendering Co., Ltd. and inspect the Bidding Documents at the address given belowevery day (except for Saturdays, Sundays and public holidays) between 9:00am-11:30 am and 13:30 pm-16:30pm (BeijingTime). 6.     A complete set of the Bidding Documents inEnglish or Chinese may be purchased 9:00?11:30 am and 1:30?4:30 pm from June 28th, 2016 (Weekends and Holidays Excluded) by interested bidders on the submission of awritten Application to the address below and upon payment of a non-refundable fee RMB1000 or in USD160. The method of payment willbe in cash or T/T. RMB200 (mainland China) or USD50 (Outside Mainland China) shall be added for the postage for express mail for purchasing bymail. No liability will be accepted for loss or late delivery. 7.      Bids must be delivered to the address below on or before, 10:00a.m. Aug, 11th ,2016 (Beijing Time). Electronic bidding will not be permitted. Late bids will berejected. Bids will be publicly opened in the presence of the bidders' designated representatives and anyone who chooseto attend atthe address below at 10:00 a.m. Aug.11th,2016 (BeijingTime). The address for submittingand opening of the Bid that referred to above is: The bid openning room at Liangxiang bid evaluation area, Beijing City Contruction Purchasing &Contracting Trade Center. No.15 Daotiannanli, Fangshan District, Beijing.ZIPCode: 102442 8.      All bids must be accompanied by a Bid Security of at least 2%of bid price. 9.      Complains, if there isany, can be sent to: mlawrence@worldbank.org?jguo@worldbank.org?cmeetc_zhanghu@163.com 10.  The Procurement Agent is: China Mechanical & ElectronicEngineering Tendering Co., Ltd. Address: 14th Floor, Huatong Tower B, No. 19B ChegongzhuangWest Road, Haidian District, Beijing, P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-8801 8619 Attention: Mr. Lin Bing/Ding Jian Electronic mail address:cmeetc_zhanghu@163.com Account forPurchasing Bidding Document (RMB) Account forPurchasing Bidding Document (USD) Account Name:China Mechanical & Electronic Engineering Tendering Co., Ltd. Account Name?China Mechanical & Electronic Engineering Tendering Co., Ltd. Bank(RMB):Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing, China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuanSub-Br. Account No.:0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-Zhangjiakou-Hohhot Railway - P122319

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published June 27, 2016  -  Deadline August 9, 2016
cpvs

High Voltage Switchgear (gis) Invitation for Bids (IFB) People's Republic of China World Bank Financed Zhangjiakou -Hohhot Railway Project Loan No.: 8131-CN IFB No.: 0772-1610F112FF06 1.      The government of P. R. China has received financing from the World Bank toward the cost ofZhangjiakou -Hohhot RailwayProject, and intends to apply part of the proceeds toward payments under the Contracts forProcurement (ICB) of High Voltage Switchgear (GIS) (Lot No.:PE02). 2.      China Mechanical & Electronic Engineering Tendering Co., Ltd., entrusted by, China Railway Corporation, now invites sealed bids fromeligible biddersfor: IFB No. Lot No. Item Unit Quantity Earliest Delivery Date Latest Delivery Date 0772-1610F112FF06 PE02 High Voltage Switchgear (GIS) unit 109 Within one month after signing the Contract Within two month after signing the Contract 3.      Qualification requirements include: Supply experience, technical, financial, legal and other requirements stipulated inthe bidding document; main qualification requirements are: For Lot PE02, in the past fiveyears, the products to be supplied shall have the following experience: at least fifty-five units of high voltage switchgear (GIS) shall have been applied on a main railway line with the minimum design speed of 250km/h, which shall have been in satisfactory operation for at least one year. This requirement can be met by up to three contracts.The Bidders shall furnish copies of the sales contracts and end-user certificate issued by the department of therelevant Railway Bureau of CRC 4.      Bidding will be conducted through the InternationalCompetitive Bidding procedures as specified in the World Bank's Guidelines: Procurement of Goods, Works and Non-Consulting Servicesunder IBRD Loans and IDA Credits & Grants by World Bank Borrowers [the edition of Jan.,2011]("Procurement Guidelines"), and isopen to all eligible bidders as defined in Procurement Guidelines. In addition, please refer to paragraphs 1.6 and 1.7 settingforth the World Bank's policy on conflict of interest. 5.      Interested eligible bidders may obtain further informationfrom China Mechanical & Electronic Engineering Tendering Co., Ltd. and inspect the Bidding Documents at the address given belowevery day (except for Saturdays, Sundays and public holidays) between 9:00am-11:30 am and 13:30 pm-16:30pm (BeijingTime). 6.     A complete set of the Bidding Documents inEnglish or Chinese may be purchased 9:00?11:30 am and 1:30?4:30 pm from June, 28th, 2016 (Weekendsand Holidays Excluded) by interested bidders on the submission of awritten Application to the address below and upon payment of a non-refundable fee RMB1000 or in USD160. The method of payment willbe in cashor T/T.  RMB200(mainland China) or USD50 (Outside Mainland China) shall be added for the postage for express mail for purchasing by mail. Noliability will be accepted for loss or late delivery. 7.      Bids must be delivered to the address below on or before, 10:00a.m. Aug, 9th ,2016 (Beijing Time). Electronic bidding will not be permitted. Late bids will berejected. Bids will be publicly opened in the presence of the bidders' designated representatives and anyone who choose to attendat the address below at 10:00 a.m.  Aug.9th, 2016 (BeijingTime). The address for submittingand opening of the Bid that referred to above is: The bid openning room at Liangxiang bid evaluation area, Beijing City Contruction Purchasing &Contracting Trade Center. No.15 Daotiannanli, Fangshan District, Beijing.ZIPCode: 102442 8.      All bids must be accompanied by a Bid Security of at least 2%of bid price. 9.      Complains, if there isany, can be sent to: mlawrence@worldbank.org?jguo@worldbank.org?cmeetc_zhanghu@163.com 10.  The Procurement Agent is: China Mechanical & ElectronicEngineering Tendering Co., Ltd. Address: 14th Floor, Huatong Tower B, No. 19B ChegongzhuangWest Road, Haidian District, Beijing, P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-8801 8619 Attention: Mr. Lin Bing/Ding Jian Electronic mail address:cmeetc_zhanghu@163.com Account forPurchasing Bidding Document (RMB) Account forPurchasing Bidding Document (USD) Account Name:China Mechanical & Electronic Engineering Tendering Co., Ltd. Account Name?China Mechanical & Electronic Engineering Tendering Co., Ltd. Bank(RMB):Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing, China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuanSub-Br. Account No.:0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-Zhangjiakou-Hohhot Railway - P122319

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published March 28, 2016  -  Deadline May 10, 2016
cpvs

Zpw2000 Series Track Circuit Equipment Invitation for Bids (IFB) People's Republic of China World Bank Financed Zhangjiakou-Hohhot Railway Project Loan No.: 8131-CN IFB No.: 0772-1610F112FF01 1.The government of P. R. China has received financingfrom the World Bank toward the cost of Zhangjiakou-Hohhot Railway Project, and intends to apply part of the proceeds toward payments under the Contracts for Procurement (ICB) ofZPW-2000 Series Track Circuit (Lot No.:SE05). 2.     China Mechanical & Electronic EngineeringTendering Co., Ltd., entrusted by, China Railway Corporation, now invites sealed bids from eligible biddersfor: IFB No. Lot No. Item Unit Quantity EarliestDeliveryDate Latest Delivery Date 0772-1610F112FF01 SE05 ZPW-2000 Series Track Circuit Set 19,186 One month aftersigning the contract Three months aftersigning the contract 3.    Qualification requirements include: Supply experience, technical, financial, legal and otherrequirements stipulated in the bidding document; main qualification requirements are: For Lot SE05, in the past five years, the products to be supplied shall have the following experience: the ZPW-2000 series track circuit shallhave been applied on a main railway line (double track) with the minimum design speed of 250 km/h. The length of therailway adopting these equipment shall be no less than 150 km and the equipment shall have been in satisfactory operation for at leastone year. This requirement can be met by up to three contracts executed within thesame year. The Bidders shall furnish copies of the sales contracts and end-usercertificate issued by the department of the relevant Railway Bureau of CRC. 4.     Bidding will be conducted through the InternationalCompetitive Bidding procedures as specified in the World Bank's Guidelines: Procurement of Goods, Works and Non-Consulting Servicesunder IBRD Loans and IDA Credits & Grants by World Bank Borrowers[the edition of Jan.,2011]("Procurement Guidelines"), and isopen to all eligible bidders as defined in Procurement Guidelines. In addition, please refer to paragraphs 1.6 and 1.7 settingforth the World Bank's policy on conflict of interest. 5.     Interested eligible bidders may obtain furtherinformation from China Mechanical & Electronic Engineering Tendering Co., Ltd. and inspect theBidding Documents at the addressgiven below every day (except for Saturdays, Sundays and public holidays) between 9:00am-11:30am and 13:30pm-16:30pm (BeijingTime). 6.     A complete set of the Bidding Documents in English orChinese may be purchased 9:00?11:30 am and 1:30?4:30 pm from Mar. 29, 2016 (Beijing Time) by interested bidders on the submission of a written Application to the addressbelow and upon payment of a non-refundable fee RMB1000 or in USD160. The method of payment will be in cash orT/T.  RMB200 (mainland China) or USD50 (Outside MainlandChina) shall be added for the postage for express mail for purchasing bymail. No liability will be accepted for loss or latedelivery. 7.     Bids must be delivered to the address below on orbefore, 10:00a.m. May 10,    2016 (Beijing Time). Electronic bidding will not be permitted. Late bids will be rejected. Bids will be publicly opened in thepresence of the bidders' designated representatives and anyone who choose to attend at the address below at 10:00a.m. May 10, 2016 (Beijing Time). The address for submitting and opening of the Bid that referred to above is: Bid Opening Room,Liangxiang bid evaluation area, BeijingCity Construction Purchasing & Contracting Trade Center. No.15 Daotiannanli,Fangshan District, Beijing. ZIP Code: 102442. 8.     All bids must be accompanied by a Bid Security of atleast 2% of bid price. 9.     Complains, if there is any, can be sent to: mlawrence@worldbank.org?jguo@worldbank.org?cmeetc_zhanghu@163.com 10.  The Procurement Agent is: China Mechanical & Electronic Engineering Tendering Co.,Ltd. Address: 14th Floor, Huatong Tower B, No. 19B Chegongzhuang West Road, Haidian District,Beijing, P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-8801 8619 Attention: Mr. Lin Bing/Ding Jian Electronic mail address: cmeetc_zhanghu@163.com Account forPurchasing Bidding Document (RMB) Account forPurchasing Bidding Document (USD) Account Name: ChinaMechanical & Electronic Engineering Tendering Co., Ltd. AccountName?China Mechanical& Electronic Engineering Tendering Co., Ltd. Bank(RMB):Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing, China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuan Sub-Br. Account No.:0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

Guangdong Chaonan Water Resources Development and Protection Demonstration Project

 | Published March 30, 2016  -  Deadline May 11, 2016
cpvs

Invitation for Bids 1. The People’s Republic of China has received a loan from the Asian Development Bank (ADB) towards the cost of Guangdong Chaonan Water Resources Development and Protection Demonstration Project (ADB Loan No.: 3114-PRC) and it intends to apply part of the proceeds of this loan to payments under the Contract named above. Bidding is open to all Bidders from eligible source countries of the ADB. 2. The Chaonan Water Supply Company (“the Employer”) now invites sealed bids from all eligible and qualified bidders for Supply, installation and commissioning of Main Pipe Supply From Shikeng to Yangfenchen From Wugou reservoir to Longxi Water Supply Plant From Shikeng to Jingdu.(G2). 3. International competitive bidding will be conducted in accordance with ADB’s Single- Stage: One- Envelope Bidding Procedure and is open to all bidders from eligible countries as described in the Bidding Document. 4. Only eligible Bidders with the following key qualifications should participate in this bidding: Completed Successfully at least 2 goods supply contracts, each with a contract price of not less than RMB 80 million or equivalent USD (as per the exchange rate on the date of the deadline for submission of bids, excluding civil works and installation fees) for the supply of water supply pipe materials and equipments from January 1, 2011 to December 31, 2015 as a main supplier. Letter of acceptance, supply contract and the acceptance certificate of the Employer are required. (If performance certificates are for Joint Venture, the bidder should be the leading goods supplier). The nature and complexity of the bidder's TWO (2) completed goods supply contracts should be similar to the scope of supply described in Section 6 (Schedule of Supply) of the Bidding Document. Detailed qualification requirements are found in Section III of the Bidding Document. 5. Interested eligible bidders may obtain further information from Chaonan Water Supply Company、Xie Jianqing、fuzhaoqiang91@163.com, and inspect the Bidding Documents at the address given below from 30 March 2016 (9:00—17:00, Beijing time, HEX). 6. The Bidding Document, in the English language, may be purchased by interested bidders on the submission of a written application to the address below and upon payment of a nonrefundable fee of RMB 500.00(or equivalent amount of US$),Drawing cost is RMB 1000(or equivalent amount of US$). The method of payment will be cash or T/T. No liability will be accepted for loss or late delivery. Date: 30 March 2016 Loan No. and Title: 3114-PRC: Guangdong Chaonan Water Resources Development and Protection Demonstration Project Contract No. and Title: G2: Main Pipe Supply From Shikeng to Yangfenchen From Wugou reservoir to Longxi Water Supply Plant From Shikeng to Jingdu Deadline for Submission of Bids: 11 May 2016; 10:00 A.M. (Beijing Time) Name: Guangdong Machinery & Electric Equipment Tendering Center Co., Ltd. Bank(RMB): Construction Bank Dongbao Guangzhou branch RMB Account No.: 44001400115059332288 Bank(USD): Industrial and Commercial Bank of China Guangdong Branch A US dollar Account No.: 3602000929200041470 7. Bids must be delivered to the address below at or before 10:00 AM (Beijing Time) on 11 May 2016. Late bids will be rejected. Bids will be opened in the presence of the bidders’ representatives who choose to attend in person at the address below at 10:00 AM (Beijing Time) on 11 May 2016. All bids must be accompanied by a bid security as described in the bidding documents. 8. When comparing Bids, ADB’s Domestic Preference Scheme will be applied in accordance with the provisions stipulated in the Bidding Document. Address for viewing and purchasing Bidding Documents: Guangdong Machinery & Electric Equipment Tendering Center Co., Ltd. , Bidding Documents Sales Office, Lobby on 3 floor, Dongzhao Building, No. 515, Dongfeng Middle Road, Guangzhou City, Guangdong Province. China Address for bid submission : Guangdong Machinery & Electric Equipment Tendering Center Co., Ltd. , Bid opening room NO. 407 on the four floor, Dongzhao Building, No. 515, Dongfeng Middle Road, Guangzhou City, Guangdong Province. China Employer: Chaonan Water Supply Company Contact Person: Mr. Cai Tel No.:+86-754-87750104 Fax No.:+86-754-87750100 Tender agency: Guangdong Machinery & Electric Equipment Tendering Center Co., Ltd. Post code: 510045 Contact Person: Lin Qingguo, Zou Jiyan, Xie Jianqing Tel. No.: +86-20-66341763, 66341762 Fax No.:+86-20-66341733 Email Address:fuzhaoqiang91@163.com

CN-HaJia Railway - P117341

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published April 5, 2016  -  Deadline May 19, 2016
cpvs

Turnout Snow-melting Equipment Invitation for Bids (IFB) People's Republic of China World Bank Financed Harbin-Jiamusi Railway Project Loan No.: 8347-CN IFB No.: 0772-1610F112FF02 1. The government of P. R. China has received financing from the World Bank towardthe cost of Harbin-Jiamusi Railway Project, and intends to apply part of the proceeds toward payments under theContracts forProcurement (ICB) of TurnoutSnow-melting Equipment (Lot No.:SE03). 2. China Mechanical & ElectronicEngineering Tendering Co., Ltd., entrusted by, China Railway Corporation, now invites sealed bids from eligible bidders for: IFB No. LotNo. Item Unit Quantity Earliest DeliveryDate Latest DeliveryDate 0772-1610F112FF02 SE03 Turnout Snow-melting Equipment set 324 One month aftersigning the contract Eleven months after signing the contract 3. Qualification requirements include: Supply experience, technical, financial, legal and otherrequirements stipulated in the bidding document; main qualification requirements are: ForLot SE03, in the past five years, the products to be supplied shall have the followingexperience: at least ten sets of the turnout snow-meltingequipment shall have beenapplied on a main railway line with the minimum designspeed of 200 km/h which shall have been in satisfactory operation forat leastone year. This requirement can be met by up tothreecontracts executed within the same year. The Bidders shall furnish copies of the salescontracts andend-user certificate issued by the department of the relevant Railway Bureau ofCRC. 4. Bidding will be conducted through the International CompetitiveBidding procedures as specified in the World Bank's Guidelines: Procurement of Goods, Worksand Non-Consulting Services under IBRD Loans and IDA Credits & Grants by World Bank Borrowers[the edition ofJan.,2011]("Procurement Guidelines"), and is open to all eligible bidders as defined in Procurement Guidelines.In addition, please refer to paragraphs 1.6 and 1.7 setting forth theWorld Bank's policy on conflict of interest. 5. Interested eligible bidders may obtain further information fromChina Mechanical & Electronic Engineering Tendering Co., Ltd. and inspect the BiddingDocuments at the address given below every day (except for Saturdays,Sundays and public holidays) between 9:00am-11:30am and13:30pm-16:30pm (Beijing Time). 6. A complete set of the Bidding Documents in English or Chinesemay be purchased 9:00?11:30 am and 1:30?4:30 pm from April.6th, 2016 (Weekends and Holidays Excluded) by interested bidders on the submission of a writtenApplication to the address below and upon payment of a non-refundablefee RMB1000 or in USD160. The method of payment will be incash or T/T.RMB200 (mainland China) or USD50 (Outside Mainland China) shall beadded for thepostage for express mail for purchasing by mail. No liability will beaccepted for loss or late delivery. 7. Bids must be delivered to the addressbelow on or before, 10:00a.m. May.19th, 2016 (Beijing Time).Electronic bidding will not be permitted. Late bids will be rejected. Bids will be publicly opened in the presence of thebidders' designated representatives and anyone who choose to attend at the address below at10:00a.m. May.19th, 2016 (Beijing Time). The address for submitting and opening ofthe Bid that referred to above is: The bid openning room at Liangxiang bid evaluation area,Beijing City Contruction Purchasing & Contracting Trade Center. No.15 Daotiannanli,Fangshan District, Beijing.ZIP Code: 102442 8. All bids must be accompanied by a BidSecurity of at least 2% of bid price. 9. Complains, if there is any, can be sent to: gollivier@worldbank.org?jguo@worldbank.org?cmeetc_hajiatl@163.com 10. The Procurement Agent is:ChinaMechanical & Electronic Engineering Tendering Co., Ltd. Address: 14th Floor, Huatong Tower B, No.19B Chegongzhuang West Road, Haidian District, Beijing, P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-88018619 Attention: Mr. Lin Bing/Ding Jian Electronic mailaddress: cmeetc_hajiatl@163.com Account forPurchasing Bidding Document (RMB) Account forPurchasing Bidding Document (USD) Account Name: ChinaMechanical & Electronic Engineering Tendering Co., Ltd. Account Name?ChinaMechanical & Electronic Engineering Tendering Co., Ltd. Bank(RMB):Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing, China Bank(USD)?Shanghai PuDong DevelopmentBank Beijing Br. HaiDianYuan Sub-Br. Account No.:0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-HaJia Railway - P117341

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published April 5, 2016  -  Deadline April 6, 2016
cpvs

Train Control System Invitation for Bids (IFB) People's Republic of China World Bank Financed Harbin-Jiamusi Railway Project Loan No.: 8347-CN IFB No.:0772-1610F112FF02 1. The government of P. R. China has received financing from the World Bank towardthe cost of Harbin-Jiamusi Railway Project, and intends to apply part of the proceeds toward payments under theContracts forProcurement (ICB) of Train Control System(Lot No.:SE04). 2. China Mechanical & ElectronicEngineering Tendering Co., Ltd., entrusted by, China Railway Corporation, now invites sealed bids from eligible bidders for: IFB No. LotNo. Item Unit Quantity Earliest DeliveryDate Latest DeliveryDate 0772-1610F112FF02 SE04 Train Control System Set 1362 One month aftersigning the contract Seventeen monthafter signing the contract 3. Qualification requirements include: Supply experience,technical, financial, legal and otherrequirements stipulated in the bidding document; main qualification requirements are: ForLot SE04, in the past five years, the products to be supplied shall have the followingexperience: at least ten sets of the train control systems shallhave been applied on a main railway line with the minimum design speed of 200 km/h which shall have been in satisfactory operationfor at least one year, This requirement can be met by up to three contracts executed withinthe same year.. The Bidders shall furnish copies of the sales contracts and end-usercertificate issued by the department of the relevant Railway Bureau of CRC 4. Bidding will beconducted through the International CompetitiveBidding procedures asspecified in the World Bank's Guidelines: Procurement of Goods, Worksand Non-Consulting Services under IBRD Loans and IDA Credits & Grants by World Bank Borrowers[the edition ofJan.,2011]("Procurement Guidelines"), and is open to all eligible bidders as defined in Procurement Guidelines.In addition, please refer to paragraphs 1.6 and 1.7 setting forth theWorld Bank's policy on conflict of interest. 5. Interested eligible bidders may obtain further information fromChina Mechanical & Electronic Engineering Tendering Co., Ltd. and inspect the BiddingDocuments at the address given below every day (except for Saturdays,Sundays and public holidays) between 9:00am-11:30am and13:30pm-16:30pm (Beijing Time). 6. A complete set of the Bidding Documents in English or Chinesemay be purchased 9:00?11:30 am and 1:30?4:30 pm fromApril,6th 2016(Weekends and Holidays Excluded) by interested bidders on the submission of a written Application to the address below and uponpayment of a non-refundable fee RMB1000 or in USD160. The methodof payment will be in cash or T/T.RMB200 (mainland China) or USD50 (Outside Mainland China) shall be added for the postage forexpress mail for purchasing by mail. No liability will be accepted for loss or late delivery. 7. Bids must be delivered to the addressbelow on or before, 10:00a.m. May,19th 2016 (BeijingTime). Electronic bidding will not be permitted. Late bids will be rejected. Bids will be publicly opened in the presence of thebidders' designated representativesand anyone who choose to attend at the address below at 10:00a.m. May,19th2016 (BeijingTime). The address for submitting and opening ofthe Bid that referred to above is: The bid openning room at Liangxiang bid evaluation area,Beijing City Contruction Purchasing & Contracting Trade Center. No.15 Daotiannanli,Fangshan District, Beijing.ZIP Code: 102442 8. All bids must be accompanied by a BidSecurity of at least 2% of bid price. 9. Complains, if there is any, can be sentto: gollivier@worldbank.org?jguo@worldbank.org?cmeetc_hajiatl@163.com 10. The Procurement Agent is: ChinaMechanical & Electronic Engineering Tendering Co., Ltd. Address: 14th Floor, Huatong Tower B, No.19B Chegongzhuang West Road, Haidian District, Beijing, P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-88018619 Attention: Mr. Lin Bing/DingJian Electronic mail address: cmeetc_hajiatl@163.com Account forPurchasing Bidding Document (RMB) Account forPurchasing Bidding Document (USD) Account Name: ChinaMechanical & Electronic Engineering Tendering Co., Ltd. Account Name?ChinaMechanical & Electronic Engineering Tendering Co., Ltd. Bank(RMB):Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing, China Bank(USD)?Shanghai PuDong DevelopmentBank Beijing Br. HaiDianYuan Sub-Br. Account No.:0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-HaJia Railway - P117341

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published May 17, 2016  -  Deadline June 28, 2016
cpvs

Digital Transmission Equipment Invitation for Bids(IFB) People's Republic of China WorldBank Financed Harbin-Jiamusi Railway Project Loan No.: 8347-CN IFB No.: 0772-1610F112FF02 1.      The government of P. R. China has received financing from the World Bank toward the cost ofHarbin-Jiamusi Railway Project, and intends to apply part of the proceeds toward payments under the Contracts forProcurement (ICB) of Digital Transmission Equipment (LotNo.:CME01). 2.      China Mechanical & Electronic Engineering Tendering Co.,Ltd., entrusted by, China Railway Corporation,now invites sealed bids from eligible biddersfor: IFB No. LotNo. Item Unit Quantity Earliest Delivery Date Latest Delivery Date 0772-1610F112FF02 CME01 Digital TransmissionEquipment Set 200 One month after signing thecontract Dec.1st 2017 3.     Qualification requirements include: Supply experience, technical, financial,legal and other requirements stipulated in the bidding document; main qualification requirements are: For Lot CME01, in the past five years, the products to be supplied shall have the following experience: the digital transmission equipment shall have beenapplied on a main railway line with theminimum design speed of 200 km/h and the minimum length of 180km, which shall havebeen in satisfactory operation for at least one year. This requirement can be met by up to three contractsexecutedwithin the ame year. The Bidders shallfurnish copies of the sales contracts and end-user certificate issued by the department of the relevant Railway Bureauof CRC 4.     Bidding will be conducted through the International Competitive Bidding procedures as specified in the World Bank'sGuidelines: Procurement of Goods, Works and Non-Consulting Services under IBRD Loans and IDA Credits & Grants by World BankBorrowers[the edition of Jan.,2011]("Procurement Guidelines"), and is open to all eligible bidders as defined in ProcurementGuidelines. In addition, please refer to paragraphs 1.6 and 1.7 setting forth the World Bank's policy on conflict ofinterest. 5.     Interested eligible bidders may obtain further information from China Mechanical & Electronic Engineering TenderingCo., Ltd. and inspect the Bidding Documents at the address given below every day (except for Saturdays, Sundays and publicholidays) between 9:00am-11:30am and 13:30pm-16:30pm (BeijingTime). 6.     A complete set ofthe Bidding Documents in English or Chinese may be purchased 9:00?11:30 am and 1:30?4:30 pm from May.17th, 2016 (Weekends and Holidays Excluded) by interestedbidders on the submission of a written Application to the address below and upon payment of a non-refundable fee RMB1000 or inUSD160. The method of paymentwill be in cash or T/T. RMB200 (mainland China) or USD50 (Outside Mainland China) shall be added for the postage for express mail for purchasing bymail. No liability will be accepted for loss or late delivery. 7.     Bids must be delivered tothe address below on or before, 10:00a.m. Jun 28th, 2016 (Beijing Time). Electronic bidding will not be permitted. Late bids will be rejected. Bids will be publicly opened in thepresence of the bidders' designated representatives and anyone who choose to attend at the address below at 10:00a.m. Jun.28th 2016 (Beijing Time). The address for submitting and opening of the Bid that referred to above is: The bid openning room at Liangxiang bid evaluation area, BeijingCity Contruction Purchasing & Contracting Trade Center. No.15 Daotiannanli,Fangshan District, Beijing. ZIPCode: 102442 8.     All bids must beaccompanied by a Bid Security of at least 2% of bid price. 9.     Complains, if there is any, can be sent to: gollivier@worldbank.org?jguo@worldbank.org?cmeetc_hajiatl@163.com 10.  The Procurement Agent is: China Mechanical &Electronic Engineering Tendering Co., Ltd. Address: 14th Floor, Huatong Tower B, No. 19BChegongzhuang West Road, Haidian District, Beijing, P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-8801 8619 Attention: Mr. Lin Bing/Ding Jian Electronic mail address: cmeetc_hajiatl@163.com Account for Purchasing Bidding Document (RMB) Account for Purchasing Bidding Document (USD) Account Name: China Mechanical & Electronic Engineering Tendering Co., Ltd. Account Name?China Mechanical & Electronic Engineering Tendering Co.,Ltd. Bank(RMB): Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing,China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuanSub-Br. Account No.: 0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-HaJia Railway - P117341

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published June 6, 2016  -  Deadline July 26, 2016
cpvs

Power Cable Invitation for Bids(IFB) People's Republic ofChina World Bank Financed Harbin-JiamusiRailway Project Loan No.: 8347-CN IFB No.: 0772-1610F112FF05 1.      The government of P. R. China has received financing fromthe World Banktoward the cost of Harbin-Jiamusi Railway Project, and intends to apply part of the proceeds toward paymentsunder the Contracts for Procurement (ICB) of High-voltage Cable (Lot No.: PE01). 2.      China Mechanical & Electronic Engineering Tendering Co.,Ltd., entrusted by, China Railway Corporation, now invites sealed bids from eligible biddersfor: IFB No. LotNo. Item Unit Quantity Earliest DeliveryTime Latest DeliveryTime 0772-1610F112FF05 PE01 High-voltage Cable m 404332.3 Jul.30th,2016 Oct.30th,2016 3. Qualification requirements include: Supply experience,technical, financial, legal     andother requirements stipulated in the bidding document; main qualification requirements are: For LotPE01. within the period from January1 ,2011 to the deadline for thesubmission of bids, the Bidder has successfully supplied 10kv power cable with the total mínimum length of 200km, which have beenin satisfactory operation and shall be in normal use at minis forty degrees Celsius in cold area for at least one year on a mainrailway line with the minimum design speed of 200km/h., this requirementcan be met by up to three contractsexecuted within the same year.The Bidders shall furnish copies of the sales contracts and end-user certificate issued by the department of the relevantRailway Bureau ofCRC. 4. Bid exclusively offering goods manufactured in China will be eligible for a margin      preference during bidevaluation. 5.      Bidding will be conducted through theInternational Competitive Bidding procedures as specified in the World Bank's Guidelines: Procurement of Goods, Works andNon-Consulting Services under IBRD Loans and IDA Credits & Grants by World Bank Borrowers[the edition ofJan.,2011]("Procurement Guidelines"), and is open to all eligible bidders as defined in Procurement Guidelines. In addition, pleaserefer to paragraphs 1.6 and 1.7 setting forth the World Bank's policy on conflict of interest. 6.      Interested eligible bidders may obtainfurther information from China Mechanical & Electronic Engineering Tendering Co., Ltd. and inspect the Bidding Documents at theaddress given below every day (except for Saturdays, Sundays and public holidays) between 9:00am-11:30am and 13:30pm-16:30pm(Beijing Time). 7.      A complete set of the Bidding Documentsin English or Chinese may be purchased 9:00?11:30 amand 1:30?4:30 pm from June.7th,2016 (Beijing Time) by interested bidders on the submission of a written Application to the address below and upon payment of anon-refundable fee RMB1000 or in USD160. The method of payment will be in cash or Telegraphic Transfer RMB200 (mainland China) orUSD50 (Outside Mainland China) shall be added for the postage for express mail for purchasing by mail. No liability will beaccepted for loss or late delivery. 8.      Bids must be delivered to the address below onor before,10:00a.m. July.26th, 2016, 2016 (Beijing Time). Electronic bidding will not be permitted. Late bids will berejected. Bids will be publicly opened in the presence of the bidders' designated representatives and anyone who choose to attendat the address below at 10:00a.m. July.26th ,2016 (BeijingTime). The address forsubmitting and opening of the Bid that referred to above is: The bid opening roomat Liangxiang bid evaluation area, BeijingCity Construction Purchasing & Contracting Trade Center. No.15 Daotiannanli,Fangshan District, Beijing. Zip Code:102442 9.     All bids must be accompanied by a Bid Security of at least 2% of bid price. 10. Complains, if there is any, can be sent to: gollivier@worldbank.org?jguo@worldbank.org?cmeetc_hajiatl@163.com 11.  The Procurement Agent is: China Mechanical& Electronic EngineeringTendering Co., Ltd. Address: 14th Floor,Huatong Tower B, No. 19B Chegongzhuang West Road, Haidian District, Beijing, P. R. China ZIP Code:100048 Telephone: 86-010-88018616 Facsimile number:86-010-8801 8619 Attention: Mr. LinBing/Ding Jian Electronic mail address: cmeetc_hajiatl@163.com Account for Purchasing Bidding Document (RMB) Account for Purchasing Bidding Document (USD) Account Name: China Mechanical & Electronic Engineering Tendering Co., Ltd. Account Name?China Mechanical & Electronic Engineering Tendering Co., Ltd. Bank(RMB): Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing,China Bank(USD)?Shanghai PuDong Development Bank Beijing Br.  HaiDianYuan Sub-Br. Account No.: 0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-HaJia Railway - P117341

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published June 6, 2016  -  Deadline July 19, 2016
cpvs

10 Kv Power Transformer, (including Lightning Protection Signal Transformer And 10kv On-load Tap Charger) Invitation for Bids (IFB) People's Republic of China World Bank Financed Harbin-Jiamusi Railway Project Loan No.: 8347-CN IFB No.: 0772-1610F112FF05 1.       The government of P. R. China has received financing from the World Bank toward the cost ofHarbin-Jiamusi Railway Project, andintends toapply part of the proceeds toward payments under the Contracts for Procurement (ICB) of 10 kv Power Transformer(including lightningprotection signal transformer, 10 kv load voltage regulator) (LotNo.:PE02). 2.       China Mechanical & Electronic Engineering Tendering Co., Ltd., entrusted by, China Railway Corporation, nowinvites sealed bids from eligible bidders for: IFB No. LotNo. Item Unit Quantity Earliest Delivery Date LatestDelivery Date 0772-1610F112FF05 PE02 10 kv Power Transformer (including lightning protection signal transformer, 10kv load voltage regulator) Set 66 Sep.01st,2016 Dec.30th, 2016 3.       Qualificationrequirements include: Supply experience, technical, financial, legal and other requirements stipulated in the bidding document;main qualification requirements are: For Lot PE02, in the past fiveyears, the products to be supplied shall have the following experience: atleast five sets of10kV power transformer, twenty-three sets of lightning protection signal transformer and five sets of 10kV on-load tapcharger shall have been applied ona main railway line with the minimum design speed of 200 km/h, which shall havebeen in satisfactory operation and innormal use at minis forty degrees Celsius in cold area for at least oneyear. This requirement can be met by up to three contracts executed.The Bidders shall furnish copies of the sales contracts andend-user certificate issued by the department of the relevant Railway Bureau ofCRC. 4.       Bidding will be conducted through the InternationalCompetitive Bidding procedures asspecified in the World Bank's Guidelines: Procurement of Goods, Works and Non-Consulting Services under IBRD Loans and IDA Credits& Grants by World Bank Borrowers[the edition of Jan.,2011]("Procurement Guidelines"), and is open to all eligible bidders asdefined in Procurement Guidelines. In addition, please refer to paragraphs 1.6 and 1.7 setting forth the World Bank's policy onconflict of interest. 5.       Interested eligible bidders may obtain further information from China Mechanical &Electronic Engineering Tendering Co., Ltd. and inspect the Bidding Documents at the address given below every day (except forSaturdays, Sundays and public holidays) between 9:00am-11:30am and 13:30pm-16:30pm (Beijing Time). 6.       A complete set of the Bidding Documents in English or Chinese may be purchased9:00?11:30 am and 1:30?4:30 pm from June.7th, 2016 (Weekends and Holidays Excluded) by interested bidders on the submission of a writtenApplication tothe address below and upon payment of a non-refundable fee RMB1000 orin USD160. The method of payment will be in cashor T/T.  RMB200 (mainland China) or USD50 (Outside Mainland China) shall be added forthe postage for express mail for purchasing by mail. No liability will be accepted for loss or latedelivery. 7.       Bids must be delivered to the address below on or before, 10:00a.m. July.19th, 2016 (Beijing Time).Electronic bidding will not be permitted. Late bids will be rejected. Bids will be publicly opened in the presence of the bidders'designated representatives and anyone who choose to attend at the address below at 10:00a.m. July.19th, 2016 (Beijing Time). The address for submitting andopening of the Bid that referred to above is: The bid openning room at Liangxiang bid evaluation area, Beijing CityContruction Purchasing & Contracting Trade Center. No.15 Daotiannanli,Fangshan District, Beijing.ZIP Code: 102442 8.       All bids must be accompanied by a Bid Security of at least 2% of bid price. 9.       Complains, if there is any, can be sent to: gollivier@worldbank.org?jguo@worldbank.org?cmeetc_hajiatl@163.com 10.  The Procurement Agentis: China Mechanical & Electronic Engineering Tendering Co., Ltd. Address: 14th Floor, Huatong Tower B, No. 19B ChegongzhuangWest Road, Haidian District, Beijing, P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number:86-010-8801 8619 Attention: Mr. Lin Bing/Ding Jian Electronic mail address: cmeetc_hajiatl@163.com Account for Purchasing Bidding Document(RMB) Account for Purchasing Bidding Document(USD) Account Name: China Mechanical &Electronic Engineering Tendering Co., Ltd. Account Name?China Mechanical & Electronic Engineering TenderingCo., Ltd. Bank(RMB): Industrial and Commercial Bankof China, Si Dao Kou Branch, Beijing, China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuanSub-Br. Account No.:0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-Zhangjiakou-Hohhot Railway - P122319

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published August 1, 2016  -  Deadline September 13, 2016
cpvs

Catenary Components(braket System) Invitation for Bids(IFB) People's Republic of China World Bank Financed Zhangjiakou-Hohhot Railway Project Loan No.: 8131-CN IFB No.: 0772-1610F112FF01 1.     The government of P. R. China has receivedfinancing from the World Bank toward the cost of Zhangjiakou-Hohhot RailwayProject, and intends to apply part of the proceeds toward payments under the Contracts forProcurement (ICB) of Catenary Components (Bracket System)s (Lot No.:CE08). 2.     China Mechanical & ElectronicEngineering Tendering Co., Ltd., entrusted by, China Railway Corporation, now invites sealed bids from eligible bidders for: IFB No. LotNo. Item Unit Quantity Earliest DeliveryTime Latest DeliveryTime 0772-1610F112FF01 CE08 CatenaryComponents (Bracket System) Set 124,797 Within 1 month after signing the contract Within 4month after signing the contract 3. Qualification requirements include: Supply experience, technical, financial, legal     and other requirements stipulated in the bidding document; main qualification requirementsare: For Lot CE08. within the period from January 1 ,2011to the deadline for the submission of bids, the Bidder has successfully supplied at least 7000 sets of cantilever fittings, 50000complete sets of droppers and 6000 sets of elastic slings, which have been in satisfactory operation for at least one year on amain railway line with the minimum design speed of 250km/h. This requirement can be met by up to three contracts. The Bidders shall furnish copies of the sales contracts andend-user certificate issued by thedepartment of therelevant Railway Bureau of CRC. 4. Bid exclusivelyoffering goods manufactured in China will be eligible for a margin     preference during bid evaluation. 5.      Bidding will be conducted through the International Competitive Bidding procedures asspecified in the World Bank's Guidelines: Procurement of Goods, Works and Non-Consulting Services under IBRD Loans and IDA Credits& Grants by World Bank Borrowers[the edition of Jan.,2011]("Procurement Guidelines"), and is open to all eligible bidders asdefined in Procurement Guidelines. In addition, please refer to paragraphs 1.6 and 1.7 setting forth the World Bank's policy onconflict of interest. 6.      Interested eligible bidders may obtain further information from China Mechanical &Electronic Engineering Tendering Co., Ltd. and inspect the Bidding Documents at the address given below every day (except forSaturdays, Sundays and public holidays) between 9:00am-11:30am and 13:30pm-16:30pm (Beijing Time). 7.      A complete set ofthe Bidding Documents in English or Chinese may be purchased9:00?11:30am and 1:30?4:30 pm from August 2, 2016 (BeijingTime) by interested bidders on the submission of a written Application to the address below and upon payment of a non-refundablefee RMB1000 or in USD160. The method of payment will be in cash or T/T.  RMB200(mainland China) or USD50 (Outside Mainland China) shall be added for the postage for express mail for purchasing by mail. Noliability will be accepted for loss or late delivery. 8.      Bids must be delivered to the address below on or before, 10:00 a.m. Sept. 13 , 2016 (Beijing Time).Electronic bidding will not be permitted. Late bids will be rejected. Bids will be publicly opened in the presence of thebidders'designated representatives and anyone who choose to attend at the address below at 10:00 a.m. Sept. 13, 2016 (BeijingTime). The address for submitting and opening of the Bid that referred to aboveis: Bid Opening Room, Liangxiang bid evaluation area, Beijing CityConstruction Purchasing & Contracting Trade Center. No.15Daotiannanli, Fangshan District, Beijing, Zip Code: 102442. 9.      All bids must be accompanied by a Bid Security of at least 2% of bid price. 10.  Complains, if there is any, can be sentto: mlawrence@worldbank.org?jguo@worldbank.org?cmeetc_zhanghu@163.com 11.  The Procurement Agent is: China Mechanical & Electronic Engineering Tendering Co., Ltd. Address: 14th Floor, Huatong Tower B, No.19B Chegongzhuang West Road, Haidian District, Beijing,P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-8801 8619 Attention: Mr. Lin Bing/Ding Jian Electronic mail address: cmeetc_zhanghu @163.com Account for Purchasing Bidding Document (RMB) Account for Purchasing Bidding Document(USD) Account Name: China Mechanical & Electronic Engineering Tendering Co.,Ltd. Account Name?China Mechanical & Electronic Engineering Tendering Co.,Ltd. Bank(RMB): Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing,China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuan Sub-Br. Account No.: 0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-Zhangjiakou-Hohhot Railway - P122319

China Mechanical & Electronic Engineering Tendering Co.,Ltd. | Published February 29, 2016  -  Deadline April 12, 2016
cpvs

Single-core Power Cable Invitation for Bids (IFB) People's Republic of China World Bank Financed Zhangjiakou-Hohhot Railway Project Loan No.: 8131-CN IFB No.: 0772-1610F112FF03 1.     The government of P. R. China has received financing from theWorld Bank toward the cost of Zhangjiakou-HohhotRailway Project,and intends to apply part of the proceeds toward payments under the Contracts forProcurement (ICB) of Power Cables (LotNo.: PE01). 2.     China Mechanical & Electronic EngineeringTendering Co., Ltd., entrusted by, China Railway Corporation, now invitessealed bids from eligible bidders for: IFB No. Lot No. Item Unit Quantity Earliest Delivery Time Latest Delivery Time 0772-1610F112FF04 PE01 Power Cables km 1890.435 May.1st 2016 Jun.30th2016 3. Qualification requirements include: Supply experience, technical,financial, legal     and otherrequirements stipulated in the bidding document; main qualification requirements are: For Lot PE01. within the period from January 1 ,2010 to thedeadline for the submission of bids,the Bidder has successfully supplied 10KV single core power cable with the total mínimum length of 900km, which have been insatisfactory operation for at least one year on a main railway line with the minimum design speed of 250km/h. This requirement can be met by up to three contracts executed within the sameyear. The Bidders shall furnish copies of the sales contracts and end-user certificate issued by the department of the relevant Railway Bureau of CRC. 4.Bid exclusively offering goods manufactured in China will be eligiblefor amargin      preference duringbidevaluation. 5.      Bidding will beconducted through the International Competitive Bidding procedures as specified in the World Bank's Guidelines: Procurement ofGoods, Works and Non-Consulting Services under IBRD Loans and IDA Credits & Grants by World Bank Borrowers[the edition ofJan.,2011]("Procurement Guidelines"), and is open to all eligible bidders as defined in Procurement Guidelines. In addition, pleaserefer to paragraphs 1.6 and 1.7 setting forth the World Bank's policy on conflict of interest. 6.      Interestedeligible bidders may obtain further information from China Mechanical & Electronic Engineering Tendering Co., Ltd. and inspectthe Bidding Documents at the address givenbelow every day (except for Saturdays, Sundays and public holidays) between9:00am-11:30am and 13:30pm-16:30pm (Beijing Time). 7.      A complete set ofthe Bidding Documents in English or Chinese may be purchased 9:00?11:30 am and 1:30?4:30 pm fromFeb.29, 2016 (Beijing Time) by interested bidders on the submission of a written Application to the address below and upon paymentof a non-refundable fee RMB1000 or in USD160. The method of payment will be in cash or T/T.  RMB200 (mainland China) or USD50 (Outside Mainland China) shall be added for thepostage for express mail for purchasing by mail. No liability will be accepted for loss or late delivery. 8.      Bids must bedelivered to the address below on or before, 10:00a.m. April 12, 2016 (Beijing Time). Electronic bidding willnot be permitted. Latebids will be rejected. Bids will be publicly opened in the presence of the bidders' designated representatives and anyone whochoose to attend at the address below at 10:00a.m. April 12,2016 (Beijing Time). The address for submitting and opening of the Bid that referred to above is:Bid Opening Room at Liangxiang bid evaluation area, Beijing CityConstruction Purchasing & Contracting Trade Center. No.15 Daotiannanli, Fangshan District, Beijing, Zip Code:102442. 9.      All bids must beaccompanied by a Bid Security of atleast 2% of bid price. 10.  Complains, if there is any, can be sent to: mlawrence@worldbank.org?jguo@worldbank.org?cmeetc_zhanghu@163.com 11. The Procurement Agent is: China Mechanical & ElectronicEngineering Tendering Co., Ltd. Address: 14th Floor, Huatong Tower B, No. 19B Chegongzhuang West Road, HaidianDistrict, Beijing, P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-8801 8619 Attention: Mr.Lin Bing/Ding Jian Electronic mail address: cmeetc_zhanghu@163.com Account for Purchasing Bidding Document (RMB) Account for Purchasing Bidding Document (USD) Account Name: China Mechanical & Electronic Engineering Tendering Co., Ltd. Account Name?ChinaMechanical & ElectronicEngineering Tendering Co., Ltd. Bank(RMB): Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing,China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuanSub-Br. Account No.: 0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

CN-Zhangjiakou-Hohhot Railway - P122319

China Mechanical & Electronic Engineering Tendering Co., Ltd. | Published December 9, 2014  -  Deadline January 20, 2015
cpvs

Procurement Of Concrete Sleepers, Concrete Sleepers For Turnout, Elastic Fastenings Invitation for Bids (IFB) People's Republic of China World Bank Financed Zhangjiakou-Hohhot Railway Project Loan No.: 8131-CN IFB No.: 0772-1410F112FF03 1.     The government of P. R. China has receivedfinancing from the World Bank toward the cost of Zhangjiakou-Hohhot RailwayProject, and intends to apply part of the proceeds toward payments under the Contracts forProcurement (ICB) of Concrete Sleepers, Concrete Sleepers for Turnout, ElasticFastenings (Lot No.: TE01, TE02, TE03, TE04). 2.     China Mechanical & ElectronicEngineering Tendering Co., Ltd., entrusted by, China Railway Corporation, now invites sealed bids from eligible bidders for: IFB No. LotNo. Item Unit Quantity Earliest DeliveryTime Latest DeliveryTime 0772-1410F112FF03 TE01 ConcreteSleepers (Multi-types) Piece 478362 October1, 2015 July 31, 2016 ConcreteSleepers for Turnout (Multi-types) Set 5 TE02 ConcreteSleepers (Multi-types) Piece 525808 October 1, 2015 July 31, 2016 ConcreteSleepers for Turnout (Multi-types) Set 47 TE03 ElasticFastenings (Multi-types) Set 967716 October 1, 2015 July 31, 2016 TE04 ElasticFastenings (Multi-types) Set 1065962 October 1, 2015 July 31,2016 Bidders maybid for any one or several lots. 3.     Qualification requirements include: Supply experience, technical,financial, legal and other requirements stipulated in the bidding document; main qualification requirements are: for Lots TE01,within the period from January 1,2009 to the deadline for the submission of bids, the bidder has successfully supplied at least100,000 similar Concrete Sleepers which havesuccessfully completed test and commissioning and are currently in satisfactoryoperation on a main line with minimum speed of 250 km/h. For Lot TE02, within the period from January 1, 2009 to the deadlineforthe submission of bids, the bidder has successfully supplied at least100,000 similar Concrete Sleepers which have successfullycompleted test and commissioning and are currently in satisfactory operation on amain line with minimum speed of 250 km/h. For LotTE03, within the period from January 1, 2009 to the deadline for the submission of bids, the bidder has successfully supplied atleast 300,000 similar sets of Elastic Fastenings which have been in satisfactory service for at least one year on a main railwayline with a minimum speed of 250 km/h. For Lot TE04, within the period from January 1, 2009 to the deadline forthe submission ofbids, the bidder has successfully supplied at least300,000 similar sets of Elastic Fastenings which have been in satisfactoryservice for at least one year on a main railway line with a minimum speed of 250 km/h. 4.     Bid exclusively offering goods manufactured in China will be eligiblefor a margin of preference during bid evaluation. 5.     Bidding will be conducted through theInternational Competitive Bidding procedures as specified in the World Bank's Guidelines: Procurement of Goods, Works andNon-Consulting Services under IBRD Loans and IDA Credits & Grants by World Bank Borrowers[the edition ofJan.,2011]("Procurement Guidelines"), and is open to all eligible bidders as defined in Procurement Guidelines. In addition, pleaserefer toparagraphs 1.6 and 1.7 setting forth the World Bank's policy on conflict of interest. 6.     Interested eligible bidders may obtainfurther information from China Mechanical & Electronic Engineering Tendering Co., Ltd.and inspect the Bidding Documents at theaddress given below every day (except for Saturdays, Sundays and public holidays) between 9:00am-11:30am and 13:30pm-16:30pm(Beijing Time). 7.     A complete set of the Bidding Documentsin English or Chinese may be purchased 9:00?11:30 am and 1:30?4:30 pm fromDec.8, 2014 (Beijing Time) by interested bidders on the submission of a written Application to the address below and upon paymentof a non-refundable fee RMB1000 or in USD160. The method of payment will be in cash or T/T. RMB200 (mainland China) or USD50 (Outside Mainland China) shall be added for the postage for express mail for purchasing bymail. No liability will be accepted for loss orlate delivery. 8.     Bids must be delivered to the address belowon or before, 10:00a.m. Jan.20, 2015 (Beijing Time). Electronic bidding will not be permitted. Late bids will be rejected. Bidswill be publicly opened in the presence of the bidders' designated representatives and anyone who choose to attend at the addressbelow at 10:00a.m. Jan.20 , 2015 (BeijingTime). The address for submitting and opening of the Bid that referred to aboveis: Meeting Room 14th Floor, Huatong Tower B, No. 19B Chegongzhuang West Road, Haidian District, Beijing 100048. 9.     All bids must be accompanied by a BidSecurity of at least 2% of bid price. 10.  The Procurement Agent is: China Mechanical & Electronic EngineeringTendering Co.,Ltd. Address: 14th Floor, Huatong Tower B, No.19B Chegongzhuang West Road, Haidian District, Beijing,P. R. China ZIP Code: 100048 Telephone: 86-010-8801 8616 Facsimile number: 86-010-8801 8619 Attention: Mr. Lin Bing/Ding Jian Electronic mail address: cmeetc_zhanghu@163.com Account for Purchasing Bidding Document (RMB) Account for Purchasing Bidding Document(USD) Account Name: China Mechanical & Electronic Engineering Tendering Co.,Ltd. Account Name?China Mechanical & Electronic Engineering Tendering Co.,Ltd. Bank(RMB): Industrial and Commercial Bank of China, Si Dao Kou Branch, Beijing,China Bank(USD)?Shanghai PuDong Development Bank Beijing Br. HaiDianYuan Sub-Br. Account No.: 0200049319201123031 Account No.: 91131455350000031 SWIFT BIC?SPDBCNSH390

RFP for Enabling China to Prepare Its Third National Communication to the UNFCCC

United Nations Development Programme | Published October 21, 2014  -  Deadline November 6, 2014
cpvs

Project Background: In order to address climate change effectively and efficiently, the United Nations Framework Convention on Climate Change (UNFCCC) was adopted by the international community in June 1992. According to Article 4.1 and Article 12 of the Convention, each Party has the responsibility to exchange communication, in which what included are national inventory of emissions by sources and removals by sinks of all greenhouse gases (GHGs), a general description of steps taken and envisaged to implement the UNFCCC as well as other information that the Party considers appropriate. Meanwhile, Decision1/CP.16 adopted by the sixteenth session the Conference of the Parties (COP) in 2010 and Decision 2/CP.17 adopted by the seventeenth session of the Conference of the Parties (COP) in 2011of the UNFCCC stipulate that non-Annex I Parties, consistent with their capabilities and the level of support provided for reporting, should submit their first biennial update report from 2014 which should cover information on national GHG inventory, mitigation and adaptation actions, related financial, technical and capacity needs, and information on the level of support received. As a Party of Non-Annex I to the United Nations Framework Convention on Climate Change (UNFCCC), China officially submitted its Initial National Communication to the 10th Conference of the Parties (COP10) in December 2004 and its Second National Communication to the 17th Conference of the Parties (COP17) in November 2012, in which China reported the GHG inventory of certain year and presented a comprehensive information on policies and actions on addressing climate change. Assignments for bidding This project is to enable China to fulfill its commitments under the UNFCCC to prepare its Third National Communication (TNC) and Initial Biennial Update Report (IBUR) and to gradually establish a management and supporting system of developing NCs and BUR in accordance with the Guidelines for the Preparation of National Communications from Non-Annex I Parties (8/CP.11) and Biennial Update Reporting Guidelines for Non-Annex I Parties (2/CP.17) adopted by the Conference of Parties (COP). The project will develop comprehensive national Greenhouse Gas (GHG) inventory of 2010 and 2012. It will further strengthen China’s capacity to develop, systematically update and apply national communication and relevant knowledge. It will enable China to combine national circumstance with sustainable development strategy and policy, effectively implement policies and action targets of address climate change, which will eventually contribute to global mitigation of and adaption to climate change. The implementation duration of this project is four years. As the outcomes of this project, the Chinese TNC and IBUR will be submitted to the Conference of the Parties (COP) to the UNFCCC. According to the project activities, 9 proposed assignments of the TNC project are opened for bidding as the following: China’s inventory of GHG emissions from the energy sector; China’s inventory of GHG emissions from industrial processes; China’s inventory of GHG emissions from the croplands; China’s inventory of GHG emissions from Livestock Sector; China’s inventory of GHG emissions from LULUCF Sector; China’s inventory of GHG emissions from wastewater / sewage treatment; Update China’s GHG inventory database; China’s GHG Emission (CO2) Forecast Methodology and scenario analysis; Improving public awareness and informing policy-decision making on climate change, spread government policies to address climate change. Considering these assignments listed above are of national importance, like national GHG inventory, GHG emission projection, etc., relevant and state-of-art technical skills and adequate coordination capacities, as well as skill in reading and writing Chinese government-style documents are required. Bidders should make sure your organization have the capacities and experiences in related fields. Submission of Proposal: Interested bidders are requested to send confirmation letter to TNC PMO by fax and indicate whether or not you intend to submit a proposal no later than October 22, 2014 at 5:00 p.m. Sub-contract proposals should be submitted to TNC Project Management Office (PMO) before 5:00 pm, November 6, 2014 (Beijing time). Ten copies of the Proposal (including technical and financial proposals) are requested. Please carefully read the TORs for sub-contracts and Request for Proposal (RFP) of Enabling China to Prepare Its Third National Communication to the UNFCCC. Any discrepancy with TOR or RFP could result in a rejection. No matter succeed or not, no proposal will be returned. Following the procurement procedure of UNDP, TNC PMO will invite experts to evaluate project proposals submitted in time. Then China International Center for Economic and Technical Exchanges (CICETE) will sign contracts with successful bidders according to the evaluation results and the authorization of the Department of Climate Change. Contacts: Climate Change Department, National Development and Reform Commission (Project Management Office of Enabling China to Prepare Its Third National Communication to the UNFCCC) Mr. Wang Shu, Mr. Miao Weijie Tel: +8610-68501553/685015746 Fax: +8610- 68502358 Email: wangs@ccchina.gov.cn; miao.weijie@ccchina.gov.cn Add: No. 38, Yuetan South Street, Xicheng District, Beijing, P.R. China Post Code: 100824 Annex: 1) Terms of References (TORs) for 9 sub-contracts 2)Request for Proposal (RFP)