Public tenders for industrial in Lagoa-santa Brazil

Object: Electronic trading floor - Cooking gas, acetylene and industrial oxygen

1 - BUILDINGS OF CIVIL WORKS PREDIAIS LIFT PIT FITNESS FOR WORK TO BE INSTALLED AT THE INDUSTRIAL Technical College CTISM UFSM. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit Supply: Unit

Object: Electronic Auction - PRICE REGISTRATION FOR ACQUISITION OF EQUIPMENT (scale, industrial mixer, thermal buffet, mass laminator ...) INTENDED FOR THE UNIVERSITY RESTAURANT OF UFSM.

Object: Electronic Auction - RECORD PRICES FOR CONSUMER ACQUISITION OF MATERIALS (sandpaper, wax, mitt for protection, ink, paper, stapler ... FOR THE DEPARTMENT OF INDUSTRIAL DESIGN UFSM.

Object: Electronic Auction - PRICE REGISTER FOR ACQUISITION OF EQUIPMENT FOR THE DEPARTMENT OF INDUSTRIAL DESIGN (thermal press for sublimation, cutting and sewing machine ...) DA UFSM.

Object: Electronic Auction - PRICE REGISTRATION FOR THE ACQUISITION OF CONSUMER MATERIALS (memory card, ink cartridge, temperature controller, stapler ...) FOR THE UFSM INDUSTRIAL DESIGN DEPARTMENT.

Object: Electronic Auction - PRICE REGISTRATION FOR THE ACQUISITION OF CONSUMER MATERIALS (memory card, ink cartridge, temperature controller, stapler ...) FOR THE UFSM INDUSTRIAL DESIGN DEPARTMENT.

Object: Electronic Auction - RECORD PRICES FOR KITCHEN EQUIPMENT ACQUISITION (balance, thermal buffet, freezer, industrial blender, food processor ...) INTENDED FOR RESTAURANT UNIVERSITY OF UFSM

Object: Electronic Auction - PREVENTIVE MAINTENANCE SERVICE DELIVERY and CORRECTIVE with SPARE PARTS of DISHWASHERS INDUSTRIAL HOBART the brand, which are installed at the University RU / UFSM Restaurant.

1 - PARTS / ACCESSORIES EQUIPMENT WORKSHOP MAINTENANCE REQUEST our Catalogue Treatment Differential: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 4 Unit of supply: Un 2 - PARTS / ACCESSORIES SHOP EQUIPMENT Casters MAINTENANCE to facilitate handling and braking system on wheels. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 5 Unit Supply: Un 3 - PARTS / ACCESSORIES SHOP EQUIPMENT MAINTENANCE Top shelf in AISI 304 stainless steel, salivary protector in curved glass 20 cm wide each side and 10 mm, approximately. Slide support for stainless AISI 304 tubular trays 1 1 / 4'diameter (in both sides which are tangent the counter). Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 5 Unit of supply: Un 4 - PARTS / ACCESSORIES EQUIPMENT MAINTENANCE WORKSHOP Acquisition and installation industrial cauldron gas, built in AISI 304 stainless steel, alloy 18.8; inner pot of cooking and outer jacket entirely in stainless steel with full thermal insulation glass wool blankets; autoclaved cover: made of stainless steel equipped with safety valve, reinforced extra turnstiles, hermetic closure by sealing gasket in neoprene, opening and closing system consists of special dampers, extension cable in stainless steel with handle in bakelite; stainless chimneys for exhalation gases and heat; stainless steel control panel; Bakelite with buttons gradual adjustment of temperature; structure and extra steam jacket reinforced qualified steel and treated with anti-corrosive primer coatings; Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Number: 8 Unit of supply: Un 5 - PARTS / ACCESSORIES SHOP EQUIPMENT MAINTENANCE Gallery tubular burners in enamelled steel. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 4 Unit of supply: Un 6 - PARTS / ACCESSORIES SHOP EQUIPMENT MAINTENANCE must be capable of 06 (six) baskets made screen wireframe nickel (antirust materials) of 45 cm (length) x 23 cm (width) x 15 cm (height), with handle and rest hook type, which must accompany the equipment. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 3 Unit of supply: Un 7 - PARTS / ACCESSORIES SHOP EQUIPMENT MAINTENANCE Switchboard: two double buttons, with league functions / off and the other stop and an emergency operation. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 2 Unit supply: Un 8 - PARTS / ACCESSORIES SHOP EQUIPMENT MAINTENANCE internal humidification system for perfect conservation of heated food. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 2 Unit supply: 9 Un - PARTS / ACCESSORIES SHOP EQUIPMENT MAINTENANCE special cooling by forced air for perfect conservation of cold foods. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 2 Unit supply: Un 10 - PARTS / ACCESSORIES EQUIPMENT WORKSHOP stainless shelf MAINTENANCE four flat planes, madidas (H x D x W): 150 x 50 x 155 cm Treatment Differential: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit supply: Un 11 - PARTS / ACCESSORIES EQUIPMENT MAINTENANCE WORKSHOP REQUEST our Catalogue. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 2 Unit supply: Un 12 - PARTS / ACCESSORIES SHOP EQUIPMENT MAINTENANCE Request our Catalogue treatment Differentiated: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit supply: Un 13 - PARTS / ACCESSORIES SHOP EQUIPMENT MAINTENANCE Request our Catalogue Treatment Differential: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit supply: Un 14 - PARTS / ACCESSORIES SHOP EQUIPMENT MAINTENANCE Request our Catalogue Treatment differentiated: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit supply: Un

Object: Electronic Auction - ACQUISITION OF EQUIPMENT (power meter, soldering station, protection relay, high steel stool, wireless microphone systems, vacuum cleaner ...), destined to the Colégio Técnico Industrial / UFSM

Object: Electronic Auction - PRICE REGISTRATION FOR THE ACQUISITION OF CONSUMER MATERIALS (slide presenter, wireless module, screwdriver kit, lamps, etc.), cumulated with the reverse logistics of waste products INTENDED FOR THE UFSM INDUSTRIAL TECHNICAL COLLEGE.

1 - Mobile / Article Confection - Steel SERVICE MANUFACTURE AND HOOD INSTALLATION INDUSTRY TYPE ISLAND, STAINLESS STEEL AISI 304, THICKNESS LEAST 1.00 MM, MEASURING 3,80X3,20X0,90M WITH FILTER SYSTEM METALLIC WASHABLE TYPE INERTIAL , TROUGH COLLECTOR fAT, dRAINS, DAMPER CUTS triggered FIRE IN FUSE, DUCT EXHAUST WITH LENGTH 6 METERS AND CROSS SECTION EQUAL 470X470MM CONTAINING INSPECTION WINDOW FOR DAMPER AND FLANGES IRON BORING EVERY METRO TO PREVENT LEAKS. EXHAUST AXIAL DIRECT DRIVE, POWER MINIMUM 1.50 HP. HOOD SHALL HAVE PROTECTED AGAINST DIRECT LIGHTING SYSTEM CROSSING THE EXHAUST FUMES THAT POSSIBILITE REMOVAL EASY FOR EXCHANGE OF BULBS AND COMPONENTS CLEANING, ANSWERING THE TECHNICAL STANDARDS IN FORCE. Differential Treatment: Type I - Exclusive participation of ME / EPP Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit Supply: UNIT

Object: Electronic Auction - RECORD PRICES FOR TOOLS OF ACQUISITION, accessories and consumables (square steel, round, flat laminate various diameters, angles, galvanized sheet, flat bars, angles, wheels, drills, industrial marker; files; Protective Glasses individual; caliper; ...), FOR THE POLYTECHNIC COLLEGE OF UFSM.

1 - Assembly / Installation / Maintenance - Electrical Equipment SERVICE FOR MAINTENANCE AND WASHING MACHINE REPAIR DISHWASHER MODEL OF MACHINE - WASHING MACHINE DISHWASHER INDUSTRIAL,'HOBART' mod brand. CRS 110 comprising: - Dismantling and removal drying tunnel engine repair, car carrier, thermometers, solenoid rinse and Buster resistance, heater resistance, car control, command axis. - Resettlement of damaged parts and electrical control for automatic replenishment of the components: Micro Switch rinse and final course. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit of supply: Un

1 - Training in the Engineering Department Programme: Introduction - What is the SOLIDWORKS Simulation - Construction of mathematical model - Construction of the finite element model - Solving the finite element model - Analyzing results - Process Errors - Finite elements - Degrees of Freedom - Interpretation of results lesson 1: review Process - analysis Process - Pre-processing - mesh - postprocessing - Multiple studies - Reports lesson 2: loop control, stress concentration and boundary conditions Treatment Differential: - Applicability Decree 7174: No applicability Margin of Preference: No Quantity: 1 Unit supply: Un 2 - Training on Program Engineering Area: lesson 1: frequency Analysis parts - basic modal analysis - frequency analysis with fixing - no fixing frequency analysis - Analysis often charging lesson 2: frequency analysis in assemblies - Contact between components lesson 3: buckling analysis - buckling analysis lesson 4: Thermal analysis - Concepts in thermal analysis - Thermal analysis in balance - transient thermal analysis - Thermal analysis with variable load by Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit supply: Un 3 - Training on Program Engineering Area: lesson 1: Basic - Introduction to interface - restrictions mapping concepts - Forces and moments of action and reaction - handling devices - models for kinematic analysis - scroll graphics, speed, acceleration and strength - torsional and translational Springs - torsional dampers and translational - 3D Contacts between components - impact Forces - generator function and complex expressions for movement and strength - flexible connectors lesson 2: Advanced - kinematic and dynamic analysis - Redundancies. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit Supply: Un 4 - Training in the Engineering Department Programme: Lesson 1: Introduction to nonlinear structural analysis - Types of nonlinearity - How to solve problems nonlinearity. Lesson 2: Introduction to the analysis of non-linear geometries - small displacement analysis - Analysis of large displacements - Analysis of finite stress - large deformation analysis Lesson 3: Introduction to models of materials - Elastic - Elastic / plastic - super elastic Nitinol - Viscoelastic linear lesson 4: Introduction to numerical arrays for nonlinearity (FEA) - increase control Technical treatment Differentiated: - Applicability Decree 7174: no Applicability Margin of Preference: no Quantity: 1 Unit supply: Un 5 - Training in the area Program Engineering: lesson 1: Basic - Introduction to interface - restrictions mapping concepts - Forces and moments of action and reaction - handling devices - models for kinematic analysis - scroll graphics, speed, acceleration and strength - torsional springs and translational - torsional dampers and translational - 3D Contacts between components - impact Forces - function generator and complex expressions for movement and strength - flexible connectors lesson 2: Advanced - kinematic and dynamic analysis - Redundancies. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit Supply: Un 6 - Training in Engineering Area Training and Training (theoretical and practical) Working UN Height student / teacher of the Technical Course Security Labor College Industrial Technician Santa Maria / UFSM, in compliance with the Regulatory Standard No. 35 of the Ministry of Labor and Employment. Course completion Forecast: 1st Class: - 09 and 10 June 2016: Local - College Industrial Technician Santa Maria (CTISM) - UFSM (Class Theory to be held on the night shift) - June 11: Local defined by company in the city of Santa Maria / RS (Practical Approach - to be held in the morning shift and afternoon) number of participants: 25 Treatment Differential: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 2 Unit supply: Un

1 - NETWORK PROTECTION Acquisition and installation of set of safety nets containing the following items: 1 - white Network sports protection, fixing the mesh 10 X 10 cm, wire 30/36 of 4 mm, made of twisted strands of virgin polyethylene High density. Funds measuring 25 x 6 meters, requiring two (02) unit and the sides measuring 40.70 x 6 meters, also two (02) units. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit Supply: Set

1 - PROTECTION NETS SET PROTECTION NETWORK Description: Safety net for gym made of virgin polyethylene twisted high density and shape of manufactured and installed mesh according to the requirements of the NBR 16046 -1, -2 NBR 16046 and NBR 16046 -3. Resistant to the propagation of fire. The number of systems must meet the following minimum requirements: - white Network sports protection, fixing the mesh 10x10cm, thickness 4mm wire, made of twisted strands of high-density virgin polyethylene. For installation in the back measuring 25x6 meters, each unit, and side measuring 40,70x6 meters, each unit. Consisting of two (2) funds and two (2) side. Differential Treatment: - Applicability Decree 7174: No Applicability Margin of Preference: No Quantity: 1 Unit Supply: Set

1 - Cooling Systems Maintenance (Industrial Maintenance) As edict. Differential Treatment: Type I - Exclusive participation of ME / EPP Decree 7174 Applicability: Applicability No Margin of Preference: No Quantity: 1 Unit of delivery: Service

1 - Installation / Electrical Maintenance - Building, Industrial According notice. Differential Treatment: Type I - Exclusive participation of ME / EPP Decree 7174 Applicability: Applicability No Margin of Preference: No Quantity: 1 Unit of delivery: Service