Public tenders for molecular in Canada

Find all Healthcare tenders in the world.
Finding business opportunities has never been easier.

Results for healthcare. Make a new search!

Molecular Modeling

Department of National Defence | Published October 18, 2016  -  Deadline August 11, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: The bidder must supply Canadian goods and/or services Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Molecular Modeling  W7701-176217/A Fournier, Annie Telephone No. - (418) 649-2775  Fax No. - (418) 648-2209   Title:   Molecular Simulations for Solid-State Systems (M4S)  Context/Background:  Defence Research and Development Canada (DRDC)  Valcartier Research Centre requires the services of a Contractor to perform molecular simulation for solid-state systems (M4S) capabilities in order to accurately predict electronic, vibrational-rotational and phonon wavelength as well as intensity transitions within the 0.7 to 12 µm region. The quantum mechanics model has to be extendable for other specific chemical and/or physical phenomenon. Potential isotopic modifications of crystalline molecules is of interest in this proposal as well as the fluorescence of solid molecules. Spectral interpretation has to be provided as supporting information to understand the origin of peak intensities, positions and widths in the signature spectra. For any further R&D work in the future, this M4S capability has to be a user-friendly tool.    Client Department:  The organization for which the services are to be rendered is Defence Research and Development Canada - Valcartier (DRDC - Valcartier).  Period of the Contract:  The period of the Contract is from Contract award to March 31, 2019.  Important Information:  i. Defence Research and Development Canada - Valcartier has determined that any intellectual property rights arising from the performance of the Work under the resulting contract will belong to the Contractor.  ii. Bidders must provide a list of names, or other related information as needed, pursuant to section 01 of Standard Instructions 2003.  iii. For services requirements, Bidders in receipt of a pension or a lump sum payment must provide the required information as detailed in article 3 of Part 2 of the bid solicitation.  iv. The requirement is limited to Canadian goods and/or services.  v. The requirement is subject to the provisions of the Agreement on Internal Trade (AIT).  vi. There is no security requirement associated with this requirement.    vii. The Work is divided into two portions, a firm portion and a portion to be performed on an "as and when requested basis" using a Task Authorization (TA).    The estimated amount of available funding for the firm portion of the Work is $50,000.00, Applicable Taxes extra. The estimated amount of available funding for the portion of the Work to be performed on an "as and when requested basis" using a TA is $295,000.00, Applicable Taxes extra.  A contract with Task Authorizations (TAs) is a method of supply for services under which all of the work or a portion of the work will be performed on an "as and when requested basis". Under contracts with TAs, the work to be carried out can be defined but the exact nature and timeframes of the required services, activities and deliverables will only be known as and when the service(s) will be required during the period of the contract. A TA is a structured administrative toolenabling the Crown to authorize work by a contractor on an "as and when requested" basis in accordance with the conditions of the contract. TAs are not individual contracts.   The Crown retains the right to negociate with suppliers on any procurement.  Documents may be submitted in either official languages of Canada. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

MOLECULAR ANALYSIS OF PRIMARY BLAST-INDUCED TRAUMATIC BRAIN INJURY

Department of National Defence | Published September 22, 2016  -  Deadline July 10, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Government Objectives Representing Best Interests/Value to Govt Comprehensive Land Claim Agreement: No Vendor Name and Address:  Canada West Biosciences Inc 5429-60 Street Camrose Alberta Canada T4V4G9 Nature of Requirements:    TITLE:  MOLECULAR ANALYSIS OF PRIMARY BLAST-INDUCED TRAUMATIC BRAIN INJURY  1. ADVANCE CONTRACT AWARD NOTICE (ACAN)   An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods,services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.  2. SECURITY:  2.1  The following security requirements apply and form part of the Contract.  SECURITY REQUIREMENT FOR CANADIAN SUPPLIER: PSPC FILE #: W7702-165802  2.1.1 The Contractor/Offeror must, at all times during the performance of the Contract/Standing Offer, hold a valid Designated Organization Screening (DOS), issued by the Canadian Industrial Security Directorate (CISD), Public Services and Procurement Canada (PSPC).  2.1.2.  The Contractor/Offeror personnel requiring access to sensitive work site(s) must EACH hold a valid RELIABILITY STATUS, granted or approved by CISD/PSPC.  2.1.3  Subcontracts which contain security requirements are NOT to be awarded without the prior written permission of CISD/PSPC.  2.1.4  The Contractor/Offeror must comply with the provisions of the:  a)  Security Requirements Check List and security guide (if applicable), attached at Annex C; b)  Industrial Security Manual (Latest Edition).  3.  REQUIREMENT:  Defence Research & Development Canada  Suffield Research Centre (DRDC Suffield) has recently initiated a blast injury program with a major focus on primary blast-induced traumatic brain injury (bTBI). Work is being carried out on a rodent model of TBI, as well as an ex vivo model system. Novel instrumentation is used to expose these model systems to single pulse shock waves, enabling the investigation of their effect on brain tissue, separate from concussive and acceleration/deceleration forces. There is a requirement to comprehensively characterize these effects at a molecular level in order to understand the etiology of the injury aswell as to rationally develop medical countermeasures.  The contractor will generate and analyze data from experiments examining the molecular basis of blast-induced TBI, the time-course of its development, and the relative efficacies of test medical countermeasures against this injury.  The work will also involve the development and characterization of various antibody-based systems.   4.  CRITERIA FOR ASSESSMENT OF THE STATEMENT OF CAPABILITIES (MINIMUM ESSENTIAL REQUIREMENTS)  Any interested supplier must demonstrate by way of a statement of capabilities that it meets the following requirements:  4.1 Mandatory Technical Criteria: The personnel conducting the work must have the following:  a)  Education: Minimum PhD. in Biological Sciencesor a related area. b)  Experience: Demonstrated expertise and experience in the use of antibodies in the detection/quantitation of proteins, and in general molecular biological techniques. c)  Specialized training: experience with Western blot analysis.  5. APPLICABILITY OF THE TRADE AGREEMENT(S) TO THE PROCUREMENT   This procurement is subject to the following trade agreement: Agreement on Internal Trade (AIT).   6. JUSTIFICATION FOR THE PRE-IDENTIFIED SUPPLIER  This contract is a continuation of a previously competitively bid R&D contract (W7702-145639/001/EDM) for which only one bid was received.   The suggested supplier is familiar with the particular idiosyncrasies of the techniques and instrumentation necessary to carry out the duties outlined in the Statement of Work.  This individual has been intimately involved in the blast injury program and the type of blast-injury specific markers that are unique to brain injury caused by blast.  Due to the unique capabilities and facilities at Suffield Research Centre, this program is one of a kind in Canada. An individual not well versed in this kind of research, as well as the laboratory specific methodologies will require a very significant period of time before they are ready to participate independently in the research. This lead time would not be required with the suggested sole source contractor.  This contract falls into the official DRDC 04J Casualty Care research Program. The official program period ends in 2019, which coincides with the period of this contract. Contracts beyond this point will be dependent on the results of the research.   7. GOVERNMENT CONTRACTS REGULATIONS EXCEPTION(S)  The following exception(s) to the Government Contracts Regulations is (are) invokedfor this procurement under subsection 6(d) - only one person is capable of performing the work.  8. EXCLUSIONS AND/OR LIMITED TENDERING REASONS  The following exclusion(s) and/or limited tendering reasons are invoked under the: Agreement on InternalTrade (AIT)  Article 506, paragraph 12 (b).  NAFTA excluded: Annex 1001.1b-2, GSIN AD917700 Military (R&D) is excluded.  WTO-AGP excluded: Annex 4, GSIN AD917700 Military (R&D) is not included.   9. OWNERSHIP OF INTELLECTUAL PROPERTY  Any intellectual property arising from the performance of the Work under the Contract will vest in Canada.  DRDC is exempted from the Treasury Board "Policy on Title to Intellectual Property Arising Under Crown Procurement Contracts"  approved 1 June 2000 as per DRDC ADM (S&T) IP-02.  10. PERIOD OF THE PROPOSED CONTRACT OR DELIVERY DATE  The Contact will be effective from award date to 2019-03-31 with the option to extend the term of the Contract by up to two (2) additional one (1) year periods.  11. COST ESTIMATE OF THE PROPOSED CONTRACT  The estimated value of the contract is $240,000.00 (GST/HST extra) for the contract period excluding option years.    12.   NAME AND ADDRESS OF THE PRE-IDENTIFIED SUPPLIER:  Canada West Biosciences Inc. 5429-60 Street   Camrose, Alberta   T4V 4G9  13.   SUPPLIERS RIGHT TO SUBMIT A STATEMENT OF CAPABILITIES  Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  14. CLOSING DATE FOR A SUBMISSION OF A STATEMENT OF CAPABILITIES   The closing date and time for accepting statements of capabilities is indicated above.   15. INQUIRIES AND SUBMISSION OF STATEMENTS OF CAPABILITIES  Inquiries and statements of capabilities are to be directed to:  Contracting Authority  Lorraine Jenkinson  Supply Specialist  Public Works and Government Services Canada Acquisitions Branch, Western Region  Telus Plaza North  10025 Jasper Avenue, 5th Floor  Edmonton, AB  T5J 1S6   Telephone:  (780) 497-3593     Facsimile:  (780) 497-3510  E-mail address:  Lorraine.Jenkinson@pwgsc-tpsgc.gc.ca   Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

MOLECULAR ANALYSIS OF PRIMARY BLAST-INDUCED TRAUMATIC BRAIN INJURY

Department of National Defence | Published October 31, 2016
Winner
Canada West Biosciences Inc
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Comprehensive Land Claim Agreement: No Notification Method: Public Advertising Contract Award Procedure (Procurement Strategy): Government Objectives Representing Best Interests/Value to Govt GSIN Description:  Military (R&D) Quantity: 1

Real-Time PCR system (qPCR)

National Research Council Canada | Published October 16, 2017  -  Deadline November 27, 2017
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   The National Research Council of Canada (NRC) in Montreal, Quebec wants to acquire one Real-Time PCR system (quantitative real-time polymerase chain reaction) or (qPCR). This is a laboratory technique of molecular biology based on the polymerase chain reaction (PCR).   Delivery and Installation: 6100 Royalmount Avenue, local L-165, Montreal (Quebec) H4P 2R2  All the specifications are detailed in the request for proposal document.  All inquiries and other communications concerning this request must be sent in writing only to the contracting authority named in the Request for proposals.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Microcalorimeter

Natural Resources Canada | Published December 12, 2016  -  Deadline January 23, 2017
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Microcalorimeter  23584-170895/A Blake, Luke J. Telephone No. - (403) 613-0725 (    ) Fax No. - (403) 292-5786 (    )  Title: Microcalorimeter System    REQUIREMENT:  CanmetENERGY-Devon of Natural Resources Canada (NRCan) has a requirement for the supply, delivery, installation, and provision of on-site training for one (1) microcalorimeter system suitable for measuring real time heat flow or temperature measurements.   The supplied system must include all parts, equipment, accessories, hardware and software necessary for determination of molecular events occurring on surfaces and at interfaces.   All deliverables must be received on or before March 31, 2017 to 1 Oil Patch Drive, Devon, Alberta, Canada, T9G 1A8.   Please refer to theRequest for Proposal for the detailed technical requirements and the list of mandatory criteria.   EVALUATION AND SELECTION:   The responsive bid meeting all mandatory requirements with the lowest overall price will be recommended for contract award.  The Crown retains the right to negotiate with suppliers on any procurement.  This PWGSC office provides procurement services to the public in English.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Automated Gel Permeation Chromatography (GPC)

Environment Canada | Published August 21, 2014
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Automated Gel Permeation Chromatography (GPC) Environment Canada (EC) Burlington, ON, has requested the supply and delivery of one (1) automated gel permeation chromatography (GPC) system equipped with an autosampler, automatic evaporation module, and data system for the removal of lipids and other high molecular weight interferences from biological or other environmental samples. This sample preparation and clean-up system will be used for contaminant monitoring and surveillance activities by Environment Canada's Water Quality Monitoring and Surveillance Division supporting priorities of the Chemicals Management Plan. Primarily, the system will be used to separate lipids from biological extracts which can then be analysed for priority contaminants; however, as a modular system it can be easily expanded and modified to handle many different sample types to accommodate future monitoring and surveillance priorities. Please refer to the Request for Proposal document for the complete details regarding this requirement including the mandatory criteria, evaluation criteria and basis of selection. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Laboratory GloveBox System

Natural Resources Canada | Published September 20, 2017  -  Deadline October 31, 2017
cpvs

Trade Agreement: NAFTA/CFTA/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   Laboratory GloveBox System  23240-180422/A Anthony Tiet Telephone: 587-926-1376 Facsimile: 780-497-3510 E-mail address: anthony.tiet@tpsgc-pwgsc.gc.ca  The Department of Natural Resources Canada (NRCan) in Devon, Alberta has a requirement for the supply, delivery, installation, and provision of on-site training and warranty services for one (1) laboratory glovebox system suitable for the handling of air and moisture sensitive activities such as chemical synthesis, spectroscopic measuring in inert atmosphere no water (H2O) and no oxygen (O2) using UV/Vis/NIR, electrochemical measurements with organic solvents (chlorinated and non-chlorinated) in real time.  The supplied system must include all parts, equipment, applicable accessories, hardware and software necessary for determination of molecular events occurring on surfaces and at interfaces.  The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA), and the Canadian Free Trade Agreement (CFTA).  Complete requirements are detailed in the Request for Proposal document. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Gaussian License

Department of National Defence | Published August 3, 2016  -  Deadline August 18, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  GAUSSIAN INC. Building 40 340 Quinnipiac Street Wallingford Connecticut United States 06492 Nature of Requirements:   Advanced Contract Award Notice (ACAN)  Gaussian License  W7702-178872/A  1. Advance Contract Award Notice (ACAN)   An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.   2. Definition of the requirement   The Suffield Research Centre of Defense Research and Development Canada has a requirement for a 20 year license agreement for Gaussian 09, the advanced quantum chemistry software, which is unique to provide state-of-art capabilities for electronic structure modeling with the high accuracy on reaction energies and spectra for the development of advanced energetic materials. To packing simulations of molecular crystals as reaction precursors of advanced energetic materials, in its output file Gaussian 09 provides charges as atom-centered monopoles from molecular electrostatic potential, which are required by the MOLPAK software, developed by the US Army Research Laboratory. Thus, Gaussian 09 is necessary for the development of advanced military energetic materials.  3. Criteria for assessment of the Statement of Capabilities    Any interested supplier must demonstrate that its product meets the following mandatory requirements:    (1). The software must be an advanced quantum chemistry simulation program fully recognized by its high accuracy on reaction energies and spectra in comparison with experiments. For instance, the deviation of the proton affinity from the experimental value for water molecule must be less than 1.10  kcal/mol.    (2). The software must provide access to source code so that the output format can be modified to fit into molecular packing simulation software such as the MOLPAK. (3). The software must provide source code which is able to be compiled in latest Linux operation systems to run most popular Linux based workstations.    (4). The software must have the enhanced methods for hybrid density functional theory simulations such as M06-2x functional. (5). The software must have capabilities to deal with model reactions of very large systems such as the ONIOM model.  4. This procurement is subject to the following trade agreement:  o Agreement on Internal Trade (AIT) o North American Free Trade Agreement (NAFTA)  5. Applicability of the trade agreement(s) to the procurement:   AIT  Article 506, #12 a  12. Where only one supplier is able to meet the requirements of a procurement, an entity may use procurement procedures that are different from those described in paragraphs 1 through 10 in the following circumstances: a. to ensure compatibility with existing products,to recognize exclusive rights, such as exclusive licences, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative;  NAFTA - ARTICLE 1016 2. An entity may use limited tenderingprocedures in the following circumstances and subject to the following conditions, as applicable: (b) where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists.  6. Justification for the Pre-Identified Supplier   The Contractorholds exclusive copyrights for the Gaussian 09 software.  This software has unique capabilities where the accuracy and output is required by the molecular packing simulation software (MOLPAK) currently being used by DRDC  7. Government Contracts Regulations Exception(s)   The following exception(s) to the Government Contracts Regulations is (are) invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work").   8. Period of the proposed contract or delivery date:   The product and all associate reports must be delivered on or before August 31, 2016.                                  9. Cost estimate of the proposed contract:  The estimated value of the contract, is $52,500   10. Name and address of the pre-identified supplier:   Gaussian Inc. 340 Quinnipiac Street, Bldg 40 Wallingford CT 06492  11. Suppliers' right to submit a statement of capabilities:   Suppliers who consider themselves fully qualified and available to provide the goods described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  12. The closing date and time for accepting statements of capabilities is:   August 18, 2016 at 2:00 pm MST  13. Inquiries and submission of statements of capabilities:  Laurie Suchodolski, Supply Specialist Public Worksand Government Services Canada Suite 1650,  635  8th Avenue SW Calgary, Alberta  T2P 3M3 Phone:  403-389-6365 Fax: 403-292-5786 Email: laurie.suchodolski@pwgsc.gc.ca Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Discrete Chemistry Analyzer

Canadian Grain Commission | Published November 4, 2014
cpvs

Trade Agreement: NONE Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Discrete Chemistry Analyzer The Canadian Grain Commission (CGC), Grain Research Laboratory (GRL) has a requirement for the supply, installation, and training for one (1) Discrete Chemistry Analzyer, including personal computer and software for the assessment of various chemical and biochemical components associated with the quality of barley and malt. The discrete chemistry analyzer is an automated system for the spectrophotometric measurements with computer-controlled sample and reagent aspiration, dispensing, heating, mixing, and absorbance measurement. The system must be capable of conducting multiple assays on one or more sample matrices. Assays to be conducted for barley and malt quality include standard measures of wort quality including free amino nitrogen and high molecular weight beta-glucan as well as activity of target enzymes such as alpha amylase. The CGC is responsible for providing quality assurance for Canadian malting barley. The GRL research programs support grain quality assurance through testing, monitoring, research and development. Bidders must submit a list of names , or other related information as needed, pursuant to section 01 of Standard Instructions 2003 (2014-09-25). The requirement is subject to a preference for Canadian goods and/or services. All deliverables must be received on or before March 18, 2015. 5K003-156449/A Desrochers, Leah leah.desrochers@pwgsc-tpsgc.gc.ca Telephone No. - (204) 984-8872 Fax No. - (204) 983-7796 Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Construction of pseudotyped lentiviruses

Department of National Defence | Published September 26, 2014
cpvs

Trade Agreement: LCSA/AIT Tendering Procedures: The bidder must supply Canadian goods and/or services Attachment: None Competitive Procurement Strategy: Best Overall Proposal Comprehensive Land Claim Agreement: No Nature of Requirements: IMPORTANT NOTICE TO BIDDERS Notifications about amendments to an opportunity Buyandsell.gc.ca/tenders provides a Web feed to keep you informed about amendments to an opportunity of interest. Get more details on the Government of Canada Web site: https://buyandsell.gc.ca/procurement-data/tenders/follow-opportun ities#20 TITLE: Construction of pseudotyped lentiviruses expressing the envelope proteins of viral biothreat agents REQUIREMENT: Defence Research and Development Canada (DRDC) - Suffield, Medicine Hat, Alberta has a requirement for a contractor to make a pseudotyped lentivirus expressing the envelope protein from ebolavirus MANDATORY CRITERIA: Failure to meet any of the following mandatory requirements at solicitation closing will render your submission non-compliant and given no further consideration. 1. Education: Principal investigator(s) must have a Ph.D. in biology. 2. Experience: 2a). in completion of project(s) related to biodefence program; 2b). in publication in medical countermeasure development against biothreat agents; 2c). in the field of molecular biology and assay development; 3. Price Proposal does not exceed the established budget. CONTRACTOR SELECTION: Contractor selection will be based on the bidder that submits the highest technically acceptable proposal provided that the total evaluated bid price does not exceed the established budget. OWNERSHIP OF INTELLECTUAL PROPERTY: Crown Owned MAXIMUM FUNDING: The maximum funding available for the Contract resulting from the bid solicitation is $76,500.00 (Applicable Taxes extra, as appropriate). Bids valued in excess of this amount will be considered non-responsive. This disclosure does not commit Canada to pay the maximum funding available. PERIOD OF CONTRACT: The period of the contract is from date of award to March 31, 2015 inclusive with one additional one (1) year option period. jasmine.scott@pwgsc-tpsgc.gc.ca Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

High Capacity Multiplexing 3D Syste

Agriculture & Agrifood Canada | Published November 14, 2014
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Marlene Hall Supply Specialist Telephone: 204-984-6423 E-mail: marlene.hall@pwgsc-tpsgc.gc.ca File No.: 01633-141028/A TITLE: High Capacity Multiplexing 3D System Agriculture & Agri-Food Canada (AAFC) in Brandon, Manitoba has a requirement for the supply and delivery one (1) High Capacity Multiplexing 3-D system in accordance with the Minimum Performance Specifications detailed herein. The high capacity multiplexing 3-D system (HCMS) will be used for the crop production pathology program, the six-row and hulless barley breeding program as well as the oat and wheat breeding programs at the Brandon Research Centre (BRC). Currently, this technology is not available at BRC to support ongoing molecular genetic research. An onsite HCMS will provide improved capacity and productivity for the breeding and pathology programs at BRC. The HCMS is essential to support unprecedented progress in research. A complete list of the mandatory performance specifications are detailed in solicitation document. All the deliverables must be received on or before March 31, 2015. FOB destination: Agriculture and Agri-Food Canada, Brandon Research Centre, Brandon, Manitoba Canada. TRADE AGREEMENTS The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA) and the Agreement on Internal Trade (AIT). Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Bioinformatic Data Analyses for the Identification of Toxicity Mechanisms and Adverse Outcome Pathways related to Air Pollution Exposure

Health Canada | Published November 2, 2015
Winner
8627789 Canada Inc.
cpvs

NOTICE OF PROPOSED PROCUREMENT (NPP) Solicitation #: 1000174482 Closing Date: September 2, 2015 Time: 2 p.m. EDT This requirement is for the department of Health Canada. Title: Bioinformatic Data Analyses for the Identification of Toxicity Mechanisms and Adverse Outcome Pathways related to Air Pollution Exposure Scope: The Inhalation Toxicology Laboratory (ITL) and Analytical Biochemistry and Proteomics Laboratory (ABPL) of Health Canada requires expert assistance with the bioinformatic analysis of high content proteomic mass spectral data derived from air pollution toxicology studies. Objectives of the Requirement The objective of this requirement is to complete expert bioinformatic analyses of the data generated in an investigation of the in vitro toxicity of ambient particulate matter impacted by source emissions on lung epithelial and mouse macrophage cell lines. The analyses will be used by Health Canada researchers to identify molecular changes relevant to air pollution toxicity in cell and animal models, and publish the results of the research in peer reviewed scientific publications. Ownership of Intellectual Property: The Crown will retain ownership of the copyright. Security Requirement: The Contractor personnel requiring access to PROTECTED information, assets or sensitive work site(s) must EACH hold a valid RELIABILITY STATUS, granted or approved by Canadian Industrial Security Directorate (CISD) of PWGSC. If the winning bidder does not hold this security screening level, the supplier will be required to obtain it before the contract is awarded. Mandatory Requirements: M1. The Bidder's proposed project leader must have a minimum of five (5) years experience by the date of this RFP working as a bioinformatician in a proteomics laboratory. M2. The Bidder's proposed project leader must hold as a minimum an Master of Science (M.Sc.) in biology; and a graduate diploma or degree in bioinformatics. M3. The Bidder must provide two references from previous work/projects conducted by the proposed project leader that are similar to the work outlined in this requirement’s Statement of Work. The references must be a former client’s Project Authority/Project Lead from a previous project. M4. The Bidder must provide a resource with at least 6 years of work experience from the date of this RFP in conducting bioinformatic analyses of proteomic data. Selection Methodology The contract will be awarded based on a determination of best value taking into account both the technical merit of the proposals and the price evaluations. To arrive at an overall score achieved by a firm, a weighting has been established whereby technical merit will be valued at 70% of the bid and price at 30%. Enquiries regarding this Request for Proposals are to be submitted in writing to: Robert Merrick Contracting Authority E-mail: Robert.Merrick@hc-sc.gc.ca

Bioinformatic Data Analyses for the Identification of Toxicity Mechanisms and Adverse Outcome Pathways related to Air Pollution Exposure

Health Canada | Published August 18, 2015  -  Deadline February 9, 2015
cpvs

NOTICE OF PROPOSED PROCUREMENT (NPP) Solicitation #: 1000174482 Closing Date: September 2, 2015 Time: 2 p.m. EDT This requirement is for the department of Health Canada. Title: Bioinformatic Data Analyses for the Identification of Toxicity Mechanisms and Adverse Outcome Pathways related to Air Pollution Exposure Scope: The Inhalation Toxicology Laboratory (ITL) and Analytical Biochemistry and Proteomics Laboratory (ABPL) of Health Canada requires expert assistance with the bioinformatic analysis of high content proteomic mass spectral data derived from air pollution toxicology studies. Objectives of the Requirement The objective of this requirement is to complete expert bioinformatic analyses of the data generated in an investigation of the in vitro toxicity of ambient particulate matter impacted by source emissions on lung epithelial and mouse macrophage cell lines. The analyses will be used by Health Canada researchers to identify molecular changes relevant to air pollution toxicity in cell and animal models, and publish the results of the research in peer reviewed scientific publications. Ownership of Intellectual Property: The Crown will retain ownership of the copyright. Security Requirement: The Contractor personnel requiring access to PROTECTED information, assets or sensitive work site(s) must EACH hold a valid RELIABILITY STATUS, granted or approved by Canadian Industrial Security Directorate (CISD) of PWGSC. If the winning bidder does not hold this security screening level, the supplier will be required to obtain it before the contract is awarded. Mandatory Requirements: M1. The Bidder's proposed project leader must have a minimum of five (5) years experience by the date of this RFP working as a bioinformatician in a proteomics laboratory. M2. The Bidder's proposed project leader must hold as a minimum an Master of Science (M.Sc.) in biology; and a graduate diploma or degree in bioinformatics. M3. The Bidder must provide two references from previous work/projects conducted by the proposed project leader that are similar to the work outlined in this requirement’s Statement of Work. The references must be a former client’s Project Authority/Project Lead from a previous project. M4. The Bidder must provide a resource with at least 6 years of work experience from the date of this RFP in conducting bioinformatic analyses of proteomic data. Selection Methodology The contract will be awarded based on a determination of best value taking into account both the technical merit of the proposals and the price evaluations. To arrive at an overall score achieved by a firm, a weighting has been established whereby technical merit will be valued at 70% of the bid and price at 30%. Enquiries regarding this Request for Proposals are to be submitted in writing to: Robert Merrick Contracting Authority E-mail: Robert.Merrick@hc-sc.gc.ca

Bioinformatic Data Analyses for the Identification of Toxicity Mechanisms and Adverse Outcome Pathways related to Air Pollution Exposure

Health Canada | Published August 14, 2014
cpvs

NOTICE OF PROPOSED PROCUREMENT (NPP) 1. SOLICITATION #: 1000162382 2. CLOSING DATE: August 28 2014 2 CLOSING TIME and TIME ZONE: 3:00 p.m. EDT This requirement is for the department of Health Canada. 4. TITLE: Bioinformatic Data Analyses for the Identification of Toxicity Mechanisms and Adverse Outcome Pathways related to Air Pollution Exposure 5. INTRODUCTION: The Inhalation Toxicology Laboratory (ITL) and Analytical Biochemistry and Proteomics Laboratory (ABPL) of Health Canada requires expert assistance with the bioinformatic analysis of high content proteomic mass spectral data derived from air pollution toxicology studies. 6. OBJECTIVES OF THE REQUIREMENT The objective of this requirement is to complete expert bioinformatic analyses of the data generated in an investigation of the in vitro toxicity of ambient particulate matter impacted by source emissions on lung epithelial, mouse macrophage and human macrophage cell lines. The analyses will be used by Health Canada researchers to identify molecular changes relevant to air pollution toxicity in cell and animal models, and publish the results of the research in peer reviewed scientific publications. 7. SECURITY REQUIREMENT: There is no security associated with this requirement. 8. MANDATORY REQUIREMENTS: Attention Bidders: Please Write beside each of the criteria the relevant page number(s) from your proposal that addresses the requirement identified in the criteria. M1 The Bidder must provide within their proposal a CV of the proposed resource that describes the capability to perform this work successfully. M2 The Bidder must hold as a minimum a M.Sc. or Ph.D. in biology; and a graduate diploma or degree in bioinformatics. A copy of the certification/diploma must be included in the Bidders proposal. M3 The Bidder must provide two references from previous work/projects that are similar to the work as outlined within this Statement of Work within their proposal. The references must be a Project Authority/Project Lead from a previous project. For all referenced projects the Bidder must provide the following information: 1. Name, phone number, and e-mail address of the client reference 2. Start and end dates of the project 3. Name of project and a brief description of the work involved 4. Role and length of involvement of the proposed resource on the project *Note: Health Canada reserves the right to check references by contacting one or all of the references provided. Health Canada also reserves the right to reject a bidder should one or more of the references provided not be available within one week from completion of bid evaluation and if in checking references they do not confirm the resources work experience, quality of work and information provided by the bidder. M4 The Bidder must provide a resource with at least 6 years of work experience from date of this RFP in conducting bioinformatic analyses of proteomic data. Experience must be in months and years. M5 The Bidder must have a minimum of five (5) years experience by the date of this RFP working as a bioinformatician in a proteomics laboratory. Experience must be in month and years. Address inquiries in writing to: Donna Pettit Senior Procurement and Contracting Officer Ottawa, ON K1A 0K9 Donna.pettit@hc-sc.gc.ca

Bioinformatic Data Analyses for the Identification of Toxicity Mechanisms and Adverse Outcome Pathways related to Air Pollution Exposure

 | Published September 23, 2014
Winner
Fred Elisma
cpvs

NOTICE OF PROPOSED PROCUREMENT (NPP) 1. SOLICITATION #: 1000162382 2. CLOSING DATE: August 28 2014 2 CLOSING TIME and TIME ZONE: 3:00 p.m. EDT This requirement is for the department of Health Canada. 4. TITLE: Bioinformatic Data Analyses for the Identification of Toxicity Mechanisms and Adverse Outcome Pathways related to Air Pollution Exposure 5. INTRODUCTION: The Inhalation Toxicology Laboratory (ITL) and Analytical Biochemistry and Proteomics Laboratory (ABPL) of Health Canada requires expert assistance with the bioinformatic analysis of high content proteomic mass spectral data derived from air pollution toxicology studies. 6. OBJECTIVES OF THE REQUIREMENT The objective of this requirement is to complete expert bioinformatic analyses of the data generated in an investigation of the in vitro toxicity of ambient particulate matter impacted by source emissions on lung epithelial, mouse macrophage and human macrophage cell lines. The analyses will be used by Health Canada researchers to identify molecular changes relevant to air pollution toxicity in cell and animal models, and publish the results of the research in peer reviewed scientific publications. 7. SECURITY REQUIREMENT: There is no security associated with this requirement. 8. MANDATORY REQUIREMENTS: Attention Bidders: Please Write beside each of the criteria the relevant page number(s) from your proposal that addresses the requirement identified in the criteria. M1 The Bidder must provide within their proposal a CV of the proposed resource that describes the capability to perform this work successfully. M2 The Bidder must hold as a minimum a M.Sc. or Ph.D. in biology; and a graduate diploma or degree in bioinformatics. A copy of the certification/diploma must be included in the Bidders proposal. M3 The Bidder must provide two references from previous work/projects that are similar to the work as outlined within this Statement of Work within their proposal. The references must be a Project Authority/Project Lead from a previous project. For all referenced projects the Bidder must provide the following information: 1. Name, phone number, and e-mail address of the client reference 2. Start and end dates of the project 3. Name of project and a brief description of the work involved 4. Role and length of involvement of the proposed resource on the project *Note: Health Canada reserves the right to check references by contacting one or all of the references provided. Health Canada also reserves the right to reject a bidder should one or more of the references provided not be available within one week from completion of bid evaluation and if in checking references they do not confirm the resources work experience, quality of work and information provided by the bidder. M4 The Bidder must provide a resource with at least 6 years of work experience from date of this RFP in conducting bioinformatic analyses of proteomic data. Experience must be in months and years. M5 The Bidder must have a minimum of five (5) years experience by the date of this RFP working as a bioinformatician in a proteomics laboratory. Experience must be in month and years. Address inquiries in writing to: Donna Pettit Senior Procurement and Contracting Officer Ottawa, ON K1A 0K9 Donna.pettit@hc-sc.gc.ca

Forensic Biology Casework

Royal Canadian Mounted Police | Published October 13, 2016  -  Deadline October 28, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  Maxxam Analytics International Corporation 335 Laird Road Unit 2 Guelph Ontario Canada N1H6J3 Nature of Requirements:   Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.  Requirement  The Royal Canadian Mounted Police (RCMP) National Forensic Laboratory System (NFLS), requires a complete Forensic Biology Casework Service on an as and when requiredbasis. Criminal files from police agencies are submitted to NFLS as cases and the ensuing casework involves the examination of evidentiary material, recovery of evidence, laboratory analysis, interpretation of findings and presentation of the conclusions reached for intelligence purposes, or for use in court.    The services include:  Identification of biological materials; including blood, semen, saliva and contact DNA;  Identification of human hair suitable for nuclear DNA analysis;  Recoveryand preservation of non-biological trace evidence; including fibres, glass and paint;  Extraction of DNA from biological material; including the differential extraction of biological material containing semen;  Application of forensic DNA analysis; specifically nuclear Short Tandem Repeat (STR) analysis analyzing the 13 core CODIS loci;  Reporting of results;  Entry of profiles into the Crime Scene Index of the National DNA Data Bank of Canada or the Local Investigative Index of the NFLS;   Provide expert witness testimony in criminal proceedings.  Public Works and Government Services Canada (PWGSC) intends to enter into a sole source contract with:    Maxxam Analytics International Corporation  335 Laird Road  Unit 2  Guelf, Ontario  N1H 6J3   Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)  - The Contractors laboratory must hold an approved accreditation from the standards council of Canada (SCC) in forensic testing laboratories in the discipline of Forensic Biology/DNA.  - As a minimum, the Contractors laboratory must provide the services to implement the following Quality Assurance Standards: i. Establish and maintain a documented and accredited quality system that is appropriate to what is being tested; ii. The processing of known reference and questioned exhibits and samples must always be physically separated; iii. DNA analysts must avoid cross contamination of samples (known reference/questioned and evidence from one case to another); iv. The laboratory must have and follow a documented evidence control system to ensure the integrity of physical evidence; v. Samples must transit in only one direction in the laboratory; vi. Technologists must transit from stage to stage of the DNA analysis process in only one direction avoiding the need to go back to a previous stage; vii. Where possible, the laboratory must retain or return a portion of the evidence sample or extract; viii. The laboratory must use validated methods and procedures for the examination of exhibits for biological material.  ix. The laboratory must use validated methods and procedures for nuclear STR DNA casework analyzes that characterize at least the 13 core CODIS loci examined using the Life Technologies AmpFlSTR® Identifiler® Plus Kit or the Promega Powerplex 16HS PCR amplification kit; generation of STR profiles using the 3100, 3130xL or 3500xL Genetic Analyzers. x. The laboratory must have and follow a procedure for evaluating the quantity ofthe human DNA in the sample. The laboratory must not amplify DNA samples below a minimum threshold of 150 pg of total human DNA; xi. The laboratory must monitor the analytical procedures using controls and standards, appropriate to DNA analysis; xii. The laboratory must check its DNA procedures annually, or whenever substantial changes are made to the protocol(s), against an appropriate and available National Institute of Standards Technology (NIST) standard reference; xiii. The laboratory must haveand follow validated and written general guidelines for the interpretation of data. These guidelines must be approved by the applicable DNA and/or Forensic Search Technical Leader; xiv. The laboratory must have a documented program, (based on the manufacturers program), for calibration of instruments and equipment; and xv. All equipment and procedures must be validated and documented for use by the applicable DNA and/or Forensic Search Technical Leader. xvi. The Contractor must incorporate into their quality documentation the CODIS profile acceptance guidelines as provided by NFLS.  - The Contractor must have a documented Training Program for qualifying DNA Analysts/Technologists, Forensic Search Analysts/Technologists.  - All work must be conducted at the Contractors facilities, which all must be located in Canada. - As the Contractor is performing casework for NFLS, the Contractor will be subject to annual audits.  - The Contractor must have the capability to provide the services in both English and/or French. The Contractor must provide translation of written documentation and verbal communication with investigators..  - The contractor must have the operational capacity to search and analyze 150 to 350 exhibit(s) per month.  - TheContractors laboratory must contain the following: a) Reception zone;      b) Common operation zone; and      c) Controlled zones which must include the following:    i) Search rooms: there must be at least two (2) separate rooms available for the examination of exhibit material of questioned origin for the presence of biological and non-biological material. A designated area in one room is required for the preparation of known samples for DNA analysis.   ii) DNA analysis rooms: except if a robotic workstation is used by the laboratory, techniques performed prior to PCR amplification such as DNA extractions, and PCR setup must be conducted at separate times or in separate spaces from each other.  iii) Except if a robotic workstation is used by the laboratory, amplified DNA product, including real time PCR, must be generated, processed and maintained in a room(s) separate from DNA extractions and PCR setup areas. The doors between rooms containing amplified DNA and other areas must remain closed except when used for passage into and out of the room.  iv) A robotic workstation may be used to carry out DNA extraction, quantitation and PCR setup provided that the analytical process has been validated.  v) Evidence Storage rooms: storage conditions must be such as to prevent loss, deterioration and contamination and to maintain the integrity and identify of the exhibits.  vi) The laboratory must have and follow written procedures for monitoring cleaning and decontaminating facilities and equipment which minimizes/prevents contamination of the exhibit material.   In addition, the following resources must be provided:  - ONE (1) DNA TECHNICAL LEADER THAT MEETS THE FOLLOWING:  Holds a minimum of a masters degree in one of the following areas: Biology, chemistry or a forensic science related area or equivalent. Successfully completed undergraduate or graduate coursework covering the following subject areas: biochemistry, genetics, molecular biology, and coursework or training in statistics and population genetics, as it applies to forensic DNA analysis.  Has performed human nuclear STR DNA analysis on biological material on a minimum of 150 cases since April 1, 2010. For each case examination, a forensic laboratory report must have been delivered.  The casework completed must have included human nuclear STR DNA analysis on any of the following biological material: blood, semen, saliva, hair and contact DNA.  No more than 25% can be for the re-sampling of exhibits previously tested for the presence of biological materials. No more than 25% can be paternity/parentage tests.  Has provided expert witness testimony as a forensic DNA analyst in criminal proceedings for a minimum of 2 different cases.    - ONE (1) FORENSIC SEARCH TECHNICAL LEADER THAT MEET THE FOLLOWING:  Holds a minimum of a four (4) year bachelor degree in one of the following areas: biology, chemistry or a forensic science related area or equivalent. Has performed human forensic recovery and identification of biological materials on a minimum of one hundred and fifty (150) cases since April 1, 2010. For each case examination a forensic laboratory report must have been delivered.   The casework completed must have included: the identification of biological materials from the following type of biological material: blood, semen, saliva, and contact DNA; and the recovery of hair and the identification of hair suitability for muclear STR DNA analysis.   No more than 25% of the cases can be for the re-sampling of exhibits previously tested for the presence of biological materials. No more than 25% of the cases can be for the preparation of samples for paternity/parentage tests.  Has provided expert witness testimony as a forensic search analyst (reporting scientist) in criminal proceedings for a minimum of 2 different cases.  - TWO (2) SENIOR DNA ANALYSTS (REPORTING SCIENTISTS) THAT MEET THE FOLLOWING:  Holds a minimum of a four (4) year bachelors degree in one of the following areas: biology, chemistry or a forensic science related area or equivalent. The degree must include courses in all of the following subject areas: biochemistry, genetics, molecular biology, and course work and or/training in statistics and population genetics, as it applies to forensic DNA analysis.  Has performed human nuclear STR DNA analysis on biological material on a minimum of one hundred and fifty (150) cases since April 1, 2010. For each case examination a forensic laboratory report must have been delivered. The casework completed must have included human nuclear STR DNA analysis on each of the following: blood, semen, saliva, hair, and contact DNA.    No more than 25% can be for the re-sampling of exhibits previously tested for the presence of biological materials.   No more than 25% can be paternity/parentage tests.  Has provided expert witness testimony as a DNA analyst (reporting scientist) in criminal proceedings for a minimum of 2 different cases.   TWO (2) SENIOR FORENSIC SEARCH ANALYSTS (REPORTING SCIENTISTS) THAT MEET THE FOLLOWING:  Holds a minimum of a four (4) year bachelors degree in one of the following areas: biology, chemistry or a forensic science related area or equivalent.     Has performed human forensic recovery and identification of biological materials on a minimum of one-hundred (100) cases since April, 2010. For each case examination, a forensic laboratory report must have been delivered.   The casework completed must have included the following biological material: blood, semen, saliva, hair, and contact DNA.   No more than 25% can be for the re-sampling of exhibits previously tested for the presence of biological materials.  No more than 25% can be for the preparation of paternity / parentage tests.  Has provided expert witness testimony as a forensic search analyst in criminal proceedings for a minimum of 2 different cases.  - ONE (1) SENIOR DNA TECHNOLOGIST THAT MEETS THE FOLLOWING:  Holds a minimum of a four (4) year bachelors degree in one of the following areas: biology, chemistry or a forensic science related area or equivalent. The degree must include course in all of the following subject areas: biochemistry, genetics, molecular biology, and coursework and or/training in statistics and population genetics, as it applies to forensic DNA analysis.  The casework completed must have included the extraction of DNA from evidentiary samples (blood, saliva, hair, contact DNA), including the isolation of DNA from semen stains using a differential extractions, DNA quantitation, DNA amplification of nuclear STR, and resolution of DNA profiles using capillary electrophoresis.  - ONE (1) QUALITY MANAGER THAT MEETS THE FOLLOWING:   Holds a minimum of a three (3) year college diploma or university undergraduate degree in one of the following areas: biology, biochemistry, biochemical technology, medical laboratory or equivalent.  - ONE (1) MANAGER of the Laboratory System  The entire requirement is defined in the Statement of Work (SOW).  A copyof the SOW can be provided upon request.  Section 6 of the Government Contract Regulations is being invoked in this procurement as only one person or firm is capable of performing the contract.  Annex 4.4 articles 506.12(a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative, and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively.  Period of proposed contract  The contract period will be from contract award to two years later, with the option to extend the period of service by up to 3 additional periods of one year each.  Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

General Wildlife Sample Collections

Environment Canada | Published February 20, 2017  -  Deadline June 3, 2017
cpvs

Under this task, the consultant will provide "upon request" support to ECCC staff in the collections, processing, and subsequent shipping of environmental samples collected from Mikisew Cree First Nation, Athabasca Chipewyan First Nation and Metis traditional lands in the Peace Athabasca Delta. Examples of the types of activities include (but not limited to):

  • Collections of terrestrial biota, including (but not limited to) muskrat, fisher, mink and river otter whole carcasses from hunting and trapping activities
  • Collections of aquatic biota, including (but not limited to) snails, prey and predatory fish samples from various watersheds and sites of traditional importance for community members
  • Collections of sediment cores, including sectioning of cores and storage in WhirlPacks TM
  • Collection of traditional land use data and indigenous knowledge data on the impacts of industrial contaminants on traditional lifestyles
  • The consultant will be responsible for the safe delivery, and proper handling and storing of samples in an ECCC freezer stored at the local Parks Canada office in Fort Chipewyan (MacKenzie Avenue). Costs will include all expenses related to sample data, archiving, storage, and administration. Access to the storage facility will be provided to the consultant on an “as-needed” basis to enter and store all environmental samples.

Task 2: River Otter Latrine Site Monitoring in the Peace Athabasca Delta

The Athabasca River and the Peace–Athabasca Delta may be impacted by industrial development in the upstream region of the oil sands. Recent reports of aquatic contamination have raised concerns on the impacts of metals (e.g. Hg, As), polycyclic aromatic hydrocarbons (PAHs) and naphthenic acids (NAs) on wildlife (assessed through Task #1). The river otter could be considered a sentinel species for monitoring programs because of the specie’s niche in the environment. The proposed monitoring of river otters will proceed primarily through a study of population health and structure by use of feces and anal jellies collected at various latrine sites in the Peace Athabasca Delta (n=12-15 latrine sites, or more if possible). Contaminant signatures will be determined in feces, as well as fecal hormone metabolite levels. Various other molecular endpoints will be assessed such as microsatellite mutations, DNA methylation and gene expression levels. Extracted DNA will also be used for population demographic measures allowing for assessments of population level responses to environmental contaminants. Under this task, activities undertaken by the consultant will include (but will not be limited to):

  • Collection of fresh (< 24 hrs) fecal samples and anal jellies at identified latrine sites
  • Habitat assessments of identified latrine sites, including geospatial assessments (ie- georeferencing habitat attributes + latrine sites) and community ID app development
  • Capture of site-specific information through visual records (ex: pictures, videos)
  • Synthesis of Indigenous Knowledge related to monitoring program design, identified latrine site locations, traditional use of area and its natural resources
  • After latrine sites are identified, they will be monitored for 4 consecutive weeks/year, coinciding with trapping season (if possible)

As the nature of the requirement is not fully known until proper consultations with indigenous stakeholders are completed, work under this contract will proceed through task authorizations. While the deliverables will be explicitly reflected in the Task Authorizations, they will generally consist of:

  • Transferring to Environment and Climate Change Canada all collected biological samples (whole carcasses, or specific tissues) as well as all associated collection data.
  • Transferring to Environment and Climate Change Canada all collected latrine site samples, including feces and anal jellies as well as all associated collection data.
  • Transferring to Environment and Climate Change Canada all collected DNA samples stored in appropriate micro-centrifuge tubes + DNA lysis buffer.
  • Transferring to Environment and Climate Change Canada compiled and synthesized indigenous knowledge and traditional land use data in Microsoft Word or Excel formats (or under a format acceptable with the consultant).

Activities for tasks authorized will be performed off-site in the Peace-Athabasca Delta, Alberta, Canada at locations determined to hold traditional importance to local indigenous communities.

As the tasks will be requested for on-demand services, tasks authorizations will be used to initiate specific tasks. Task authorizations will include: activities to be performed, identification of general or explicit deliverables, and an estimate of the time required. Tasks that are expected to span several months, the bidder will provide, via email, an end-of-month report that accounts for time used and remaining.

Award Notice - MiSeq, Hi-ScanSQ & C-Bot Equipment Service Coverage & Preventative Maintenance

Agriculture & Agrifood Canada | Published March 19, 2015
Winner
Illumina Canada, Inc.
cpvs

REQUIREMENT: Agriculture and Agri-Food Canada, Saskatoon Research Centre (SRC) in Saskatoon, SK requires service coverage and preventative maintenance for the Illumina Miseq, Hi-Scan with SQ module, and Illumina C-bot equipment. This includes a comprehensive coverage plan with full coverage on all parts, labour and travel; comprehensive 5 × 24 email support and 5 × 18 telephone support (instrument, applications, bioinformatics); three business day average on-site response time; hardware and software updates; on-site applications support; discounts on advanced training and one preventative maintenance visit per year. This specialized equipment can only be serviced by the original supplier, Illumina. The equipment is proprietary to Illumina and Illumina does not provide licenses to outside contractors to service their machines. SCOPE OF WORK: The Illumina MiSeq, Hi-Scan with SQ module and C-bot were purchased previously from Illumina in 2011, 2012 and 2013. This equipment is essential to a number of projects at SRC. In addition, SRC processes samples for researchers at other AAFC centres and for collaborators in Saskatoon. The Illumina equipment is predominantly used for molecular marker analyses, so it is used for identifying genetic variation and mapping traits of interest and thus is essential for numerous projects in both the Genomics group and the breeding section. Some of the equipment is also used for gene discovery work, in particular for genes controlling resistance to abiotic and biotic stress. The equipment is used by multiple labs in Saskatoon. Labs in Fredericton and Winnipeg have also used the equipment for marker work. CONTRACT PERIOD: The Contract will be for the period from March 19, 2015 to March 18, 2016 with two (2), one (1) year options to extend. INITIAL CONTRACT VALUE: Estimated Value: $63,062.00 USD (plus taxes, if applicable) Option Periods: #1 - March 19, 2016 – March 18, 2017 - $65,406.00 (plus taxes, if applicable) #2 - March 19, 2017 – March 18, 2018 - $68,208.00 (plus taxes, if applicable) PROPOSED CONTRACTOR: Illumina, Inc. 5200 Illumina Way San Diego, CA 92121-1975 United States SOLE SOURCE JUSTIFICATION: Illumina Canada is the only company that can provide guaranteed equipment coverage and servicing for this equipment. The equipment is proprietary to Illumina and Illumina does not provide licenses to outside contractors to service their machines. Any outside servicing of equipment (other than Illumina), will no longer allow us to purchase upgrades, trade-in’s to the equipment, etc. and Illumina will no longer guarantee that they could fix the equipment if there is a breakdown. The equipment is expensive and the most cost effective way to ensure there are no work stoppages is to maintain a service contract with Illumina for comprehensive services. These services will provide efficient response times for any problems which could arise and on-going optimization of the equipment. ACAN NOTICE: You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the Contracting Authority. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a "Statement of Capabilities" that meets the requirements set out in the ACAN, the Contracting Authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the Contracting Authority will proceed to a full tendering process. Inquiries on Submission of Statement of Capabilities: Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing, either via letter, facsimile or email to the contact person identified in this Notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The Solicitation Number, Name of Contracting Authority and Closing Date of the ACAN must appear within your Statement of Capabilities in block letters. The Crown retains the right to negotiate with suppliers on any procurement. Contracting Authority: Melissa Smith, Procurement Officer Agriculture and Agri-Food Canada Western Service Centre 300 – 2010 12th Avenue Regina, SK S4P 0M3 Phone: 306-523-6545; Fax: 306-780-5018 Melissa.Smith@agr.gc.ca

MiSeq, Hi-ScanSQ & C-Bot Equipment Service Coverage & Preventative Maintenance

Agriculture & Agrifood Canada | Published February 13, 2015  -  Deadline February 27, 2015
cpvs

REQUIREMENT: Agriculture and Agri-Food Canada, Saskatoon Research Centre (SRC) in Saskatoon, SK requires service coverage and preventative maintenance for the Illumina Miseq, Hi-Scan with SQ module, and Illumina C-bot equipment. This includes a comprehensive coverage plan with full coverage on all parts, labour and travel; comprehensive 5 × 24 email support and 5 × 18 telephone support (instrument, applications, bioinformatics); three business day average on-site response time; hardware and software updates; on-site applications support; discounts on advanced training and one preventative maintenance visit per year. This specialized equipment can only be serviced by the original supplier, Illumina. The equipment is proprietary to Illumina and Illumina does not provide licenses to outside contractors to service their machines. SCOPE OF WORK: The Illumina MiSeq, Hi-Scan with SQ module and C-bot were purchased previously from Illumina in 2011, 2012 and 2013. This equipment is essential to a number of projects at SRC. In addition, SRC processes samples for researchers at other AAFC centres and for collaborators in Saskatoon. The Illumina equipment is predominantly used for molecular marker analyses, so it is used for identifying genetic variation and mapping traits of interest and thus is essential for numerous projects in both the Genomics group and the breeding section. Some of the equipment is also used for gene discovery work, in particular for genes controlling resistance to abiotic and biotic stress. The equipment is used by multiple labs in Saskatoon. Labs in Fredericton and Winnipeg have also used the equipment for marker work. CONTRACT PERIOD: The Contract will be for the period from March 19, 2015 to March 18, 2016 with two (2), one (1) year options to extend. INITIAL CONTRACT VALUE: Estimated Value: $63,062.00 USD (plus taxes, if applicable) Option Periods: #1 - March 19, 2016 – March 18, 2017 - $65,406.00 (plus taxes, if applicable) #2 - March 19, 2017 – March 18, 2018 - $68,208.00 (plus taxes, if applicable) PROPOSED CONTRACTOR: Illumina, Inc. 5200 Illumina Way San Diego, CA 92121-1975 United States SOLE SOURCE JUSTIFICATION: Illumina Canada is the only company that can provide guaranteed equipment coverage and servicing for this equipment. The equipment is proprietary to Illumina and Illumina does not provide licenses to outside contractors to service their machines. Any outside servicing of equipment (other than Illumina), will no longer allow us to purchase upgrades, trade-in’s to the equipment, etc. and Illumina will no longer guarantee that they could fix the equipment if there is a breakdown. The equipment is expensive and the most cost effective way to ensure there are no work stoppages is to maintain a service contract with Illumina for comprehensive services. These services will provide efficient response times for any problems which could arise and on-going optimization of the equipment. ACAN NOTICE: You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the Contracting Authority. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a "Statement of Capabilities" that meets the requirements set out in the ACAN, the Contracting Authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the Contracting Authority will proceed to a full tendering process. Inquiries on Submission of Statement of Capabilities: Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing, either via letter, facsimile or email to the contact person identified in this Notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The Solicitation Number, Name of Contracting Authority and Closing Date of the ACAN must appear within your Statement of Capabilities in block letters. The Crown retains the right to negotiate with suppliers on any procurement. Contracting Authority: Melissa Smith, Procurement Officer Agriculture and Agri-Food Canada Western Service Centre 300 – 2010 12th Avenue Regina, SK S4P 0M3 Phone: 306-523-6545; Fax: 306-780-5018 Melissa.Smith@agr.gc.ca

Digital PCR System

Agriculture and Agri-Food Canada | Published September 29, 2016  -  Deadline October 18, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  Bio-Rad Laboratories (Canada) Ltd. 1329 Meyerside Drive Mississauga Ontario Canada L5T1C9 Nature of Requirements:   Droplet Digital PCR System  01633-170824/A Omerzo, Zeljka Telephone No. - (204) 510-2597  Fax No. - (204) 983-7796   Line 1, Digital PCR System  1. Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to thesupplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities.If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.   2. Definition of the requirement   Molecular genetics and genomics research at Agriculture and Agri-Food Canada (AAFC) - Brandon involves a broad suite of activities.  Researchers apply genetic approaches using molecular tools, conduct transgenic studies, investigate plant development and physiology and characterize plant pathogens.  A common essential need in these research projects is to quantify nucleic acids with high precision, sensitivity, and specificity at a high throughput level.  These investigations often involve very limited amounts of nucleic acid samples, as from micro-dissected tissues.  The new emerging Droplet Digital PCR (ddPCR) technology offers a very robust system for absolute quantification of nucleic acids and is required to meet the research needs at AAFC-Brandon.  3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)  Any interested supplier must demonstrate by way of a statement of capabilities that its equipment meets the following requirements:  1. ddPCR samples are amplified in a standard 96 well plate on a gradient enabled thermal cycler to allow for high sample throughput and gradient optimization of new assays. 2. The ddPCR Reader analyzes 32 samples/hour unattended, without manual intervention. 3. The ddPCR system is of a "benchtop" scale must read samples in standard 96-well format plates to enable incorporation into our existing workflows and use standard thermo cyclers already present at AAFC - Brandon. Existing workflows utilise a temperature gradient PCR step to optimise assay conditions and the requested new ddPCR system must be able to incorporate a temperature gradient PCR step.  The temperature gradient ability must NOT require any additional pipetting or liquid handling steps as these will introduce additional errors into the experiment. 4. The ddPCR system must analyze 96 unique samples in less than 5 hours, including the steps of 1) partitioning of sample assays into 12,000 to 20,000 reaction partitions, 2) PCR amplification and3) reading and scoring reaction partitions.  Note: This requirement is necessary in order to analyze multiple samples at once without introducing potential source of error by single tube analyses. Also, these features are needed to meet sample throughput requirements of the multiple users from several AAFC research programs as well as potential industrial partners at Brandon. 5. This ddPCR system should include droplet generator and droplet reader. The droplet reader MUST incorporate a 96-well auto-sampler so that unattended operation is possible to maximize sample throughput, and so that it can accommodate multiple users and/or plates per day. 6. The ddPCR system must produce 12,000 to 20,000 reaction partitions per sample for 96 unique samples in 30 minutes or less. 7. The ddPCR system that is compatible with DNA binding chemistries (e.g. Evagreen) as well as Hydrolysis probe chemistry using FAM and/or HEX dyes and  must detect fluorescence signals corresponding to those derived from VIC-, HEX-,Evagreen-, or FAM-labeled PCR probes. 8. The ddPCR system must distinguish between gene copy number variants of 11 vs. 10 and less using two or less sample assay reactions of one reaction well each (equivalent to one chamber or panel of areaction chip)with an input of nucleic acid template equivalent to 100 ng of plant or microbse' genomic DNA or less so as to minimise amount of nucleic acid sample size required per assay and cost of consumables. This ability must be achieved without the need for a preamplification step which can cause a significant measurement bias by distorting the abundance and relative presence of target nucleic acids.  9. The ddPCR system must enable gene expression analysis and quantification of DNA copies with+/- 10% precision to meet the requirements of the multiple users from several research programs. The system must include gene expression module that can analyze and produce accurate gene expression levels in the sample.  10. The ddPCR system must detect a specific genetic variant at a level as low as 0.001% abundance in a sample mixture that includes other genetic variants, and enable a linear quantification of this variant over four orders of magnitude of abundance of this variant in a complex mixture of nucleic acids.  11. The ddPCR system must NOT require development of standard curves or need an external calibrator to estimate relative abundance of target nucleic acids, thereby minimizing the number of samples to be prepared and analyzed.  Rather, the instrument must generate digital data reflecting absolute quantification of target nucleic acid abundance.  12. The digital PCR system must have a reaction partition volume of 1 nL or less.  13. The relative expanded uncertainty of the ddPCR system from the data for 20,000 reaction partitions is required to be 5% or less to achieve the data precision required by the research programs.  14. The ddPCR system must generate 12,000 to 20,000 reaction partitions from a 20 microlitre sample reaction volume. 15. TheddPCR system must NOT require use of specialized liquid handling equipment or robotic liquid handlers that would typically require specialized training and a dedicated technician to operate since the system will be used by numerous researchers from multiple programs. 16. The ddPCR system must generate and assay reaction partition in a manner that minimize the dead volume of the partition holder and reader to <25% 12 506 1016 1329 starting reaction volume. 17. the system must include all needed software for operation and analysis. 18. can detect one copy of target sequence in a dna sample. 19. system's perform report various results such as absolute concentration, number variation ratio analysis (for gene expression analysis). 4. applicability trade agreement(s) to procurement this is subject following agreement on internal (ait) north american free (nafta) 5. justification pre-identified supplier qx200 ddpcr manufactured by bio-rad laboratories (canada) ltd only known instrument meeting specifications essential requirement listed above. 6. government contracts regulations exception(s) (are) invoked under subsection 6(d) - person capable performing contract. 7. exclusions or limited tendering reasons exclusion(s) are the: article (b) where there an absence competition technical goods services be supplied aparticular no alternative substitute exist. 2(b) where, works art, connected with protection patents, copyrights other exclusive rights, proprietary information reasons, particular reasonable exists. 8. period proposed contract delivery date theequipment delivered before february 28, 2017. 9. name address ltd. meyerside drive mississauga ontario canada l5t1c9 10. suppliers' right submit statement capabilities suppliers who consider themselves fully qualified available provide goods, construction described acan may writing contact personidentified notice closing notice. clearly demonstrate how meets advertised requirements. 11. submission theclosing time accepting statements october 18, 2016. 12. inquiries directed to: zeljka omerzo supply officer public governmentservices compensation suite 100-167 lombard avenue winnipeg, mb r3b 0t6 telephone: (204) 510-2597 facsimile: 983-7796 e-mail address: zeljka.omerzo@tpsgc-pwgsc.gc.ca you hereby notified that intends negotiate firm identified should have any questions concerning requirement, contracting advance award (acan) allows departments agencies post notice, less than fifteen (15) calendar days, indicating community it good, service contractor. if submits, date, requirements set out acan, authority then proceed award. however, found meet will full process. herein, pwgsc file number, officer's theacan appear outside envelope block letters or, case facsimile transmission, covering page. crown retains procurement. documents submitted either official language canada. date: above-mentioned canada.< pre>