Call +44 800 9755 164

Public tenders for furniture in Belfast United Kingdom

Find all Furniture tenders in the world.
Finding business opportunities has never been easier.

Results for furniture. Make a new search!

Kitchen furniture and equipment

Choice Housing Ireland Limited (and its subsidiaries) | Published March 23, 2017  -  Deadline April 4, 2017
cpvs
39141000, 39141400

The successful supplier will be expected to supply and deliver* Kitchen Units and associated goods to Choice Housing Ireland Limited DLO staff as required over a 12 month period in accordance with the M3NHF Responsive Maintenance and Void Property Works Version 7 Specification and M3NHF Disabled Adaptations Works Version 6.2 Specification. Colours for kitchen units, doors, worktops and the like will be confirmed by Choice House Ireland Limited at time of placing order. The successful supplier shall warrant that the materials being supplied are in sound condition, fit for purpose and free from defects for a period of 12 months from date of delivery. Any goods supplied which do not meet this criteria shall be repaired or replaced within one month (from notification) at no additional cost to Choice Housing Ireland Limited.

Tenderers should note that all wall and base unit carcasses (except for sink base units) should be made from particle (or Chipboard), shall be 15mm thick in density range of 650 — 800kg/m3 and comply with BS EN 312 Grade P3 (colour dyed green). Chipboard should be faced both sides in white melamine with pre-glued edging strips fixed to all exposed sides to enable a seal. Front edging strip to match door finish. Sink Base Unit Carcasses shall be 15mm Moisture Resistant Plywood and comply with BS EN636-2. Plywood should be faced both sides in white high pressure laminate with pre-glued edging strips fixed to all exposed sides to enable a seal. Front edging strip to match door finish. All kitchen units should be manufactured to meet strength specification level ‘H’ and have fully repairable carcasses.

Doors should be manufactured from 18mm Vinyl Foil Wrapped profiled MDF with a 0.4mm minimum thickness of wrapping. All door prices listed in section 20.0 should include hinges, handle (unhanded) and fixings/brackets where appropriate. Drawer fronts should be 18mm vinyl foil wrapped profiled MDF to match doors. All drawers should be proprietary metal framed with 15mm melamine faced and edged chipboard (as per carcass) drawer base and back. Each internal metal drawer liner should have a maximum depth of 140mm and should be mounted in full depth proprietary metal drawer runners complete with restrictor stops (included in price). All drawer prices listed in section 20.0 should include hinges, handle (unhanded) and fixings/bracket.

All worktops should have a minimum thickness of 28mm and be manufactured using laminated moisture resistance chipboard core to comply with BS EN 312 — Grade P3 (colour dyed green). All post-formed worktops should be constructed using particleboard with a minimum ‘P5’ classification however if this is not obtainable construct only square edge and double post-formed worktop using particleboard with a minimum ‘P3’ classification.

  • 1