Call +44 800 9755 164

Public tenders for forestry in Malchin Germany

Find all Forestry tenders in the world.
Finding business opportunities has never been easier.

Results for forestry. Make a new search!

Specialist agricultural or forestry machinery

Landesforst Mecklenburg-Vorpommern – Anstalt des öffentlichen Rechts | Published November 19, 2016  -  Deadline January 3, 2017

Procurement of a harvester and forwarder 2.

Harvester (harvester).

250 Bh per month calculated.

It is to offer a basic machine with a crane and a matching unit.

- Transport height per axle, max .: 4 m;

- Transport height for low loaders, max .: 3.80 m;

- Width, max .: 3 m;

- Motor Power:> 220 kW according to DIN 1585;

- 8- wheeled undercarriage with tandem axles;

- Parallel crane or parallel-guided telescopic crane with a minimum range of 10 m;

62 kNm;

- Maximum trunk diameter 70-75 cm in the single cut.

Forwarder (forwarder).

The deliverable forwarders following ranges are back to:

Softwood and hardwood pulpwood <3 m;

Pulpwood 2 x 3 m;

Stem wood sections to 6 m.

The play volume of standing timber portion may be greater than a cubic meter, so it must be in the tender preparation at a sufficient dimensioning of the crane.

250 Bh per month calculated for the machine.

- Payload> = 14 and <= 15 tonnes;

- Transport height per axle, max .: 4 m (with ribbons);

- Transport height for low loaders, max .: 3.80 m without bands;

- Width, max .: 3.00 m (with ribbons);

- Engine power> = 155 kW;

- 8- wheel - chassis with tandem axles;

- Belts on all axes, Street Rubbers including all assembly aids or of the type similar to, including street legal;

- Boom reach at least 9.50 m;

- Crane tilt;

- Grapple Hultdins Super Grip II 360 SG S or equivalent (proof of equivalence with tender).

Additional minimum requirements for the machines to be supplied are defined in the tender documents.

The deliverable forwarders following ranges are back to:

Softwood and hardwood pulpwood <3 m;

Pulpwood 2 x 3 m;

Stem wood sections to 6 m.

The play volume of standing timber portion may be greater than a cubic meter, so it must be in the tender preparation at a sufficient dimensioning of the crane.

250 Bh per month calculated for the machine.

- Payload 12 tons;

- Transport height per axle, max .: 4 m;

- Transport height for low loaders, max .: 3.80 m;

- Width, max .: 3 m;

- Engine power> = 135 kW;

- 8- wheel - chassis with tandem axles;

- 4 bands Olofsforce Baltic (or equivalent) with assembly aids (clamps / key);

- Boom reach at least 9.50 m;

- Grapple Hultdins Super Grip II 300 SG S or equivalent (proof of equivalence with tender).

Additional minimum requirements for the machine to be delivered are defined in the tender documents.

Long-term conversion of coniferous monocultures in forestry office Billenhagen

Landesforst MV AöR | Published December 3, 2016  -  Deadline February 1, 2017
Long-term transfer of stocks with a predominant proportion of deciduous trees with low life expectancies at about 1.65 hectares with fence construction and provision of planting material common oak, but Douglas fir from controlled cultivation wage of the client

Services incidental to logging

Landesforst Mecklenburg-Vorpommern – Anstalt des öffentlichen Rechts | Published December 7, 2016  -  Deadline January 10, 2017
Work will invariably in the forest of the Landes forest MV public institution instead. 

The power must be in the following timber harvesting technologies:

3590 fm

5436 fm

5050 fm.

2690 fm

Requirements for machinery and equipment

General

Only oils and lubricants in biodegradable molded approved.

100 l) perform with.

Based on the equipment used in the operation of the State Forestry Director MV apply for orientation of the required performance classes the following descriptions:

cable skidder

60 kW;

550 mm;

- Ground care open and good self-cleaning tread pattern;

6 tons easier train;

60 m.

Forwarder

By employed forwarders following ranges are back to:

Softwood and hardwood pulpwood <3 m

Pulpwood 3 m

Stem wood sections to 6 m

The play volume of a piece of wood can be higher than a cubic meter, so pay attention to sufficient dimensioning of the crane.

Suspension / Tires:

6 - wheel - chassis with tandem axles;

- At least 600 mm wide tires.

Crane / Hydraulic:

- Boom reach at least 7 m,

Harvester

The main focus of the harvester is 20 - 45 cm BHD Retiring inventory

Suspension / Tires:

6 - wheel chassis with tandem axles;

- At least 600 mm wide tires.

Crane / hydraulics and unit:

- Crane with a minimum range of 10 m;

- Maximum cutting diameter 550 mm in single-section, which is not grasped is to manually make.

900 fm

Requirements for machinery and equipment

General

Only oils and lubricants in biodegradable molded approved.

100 l) perform with.

Based on the equipment used in the operation of the State Forestry Director MV apply for orientation of the required performance classes the following descriptions:

cable skidder

60 kW;

550 mm;

- Ground care open and good self-cleaning tread pattern;

6 tons easier train;

60 m.

Forwarder

By employed forwarders following ranges are back to:

Softwood and hardwood pulpwood <3 m

Pulpwood 3 m

Stem wood sections to 6 m

The play volume of a piece of wood can be higher than a cubic meter, so pay attention to sufficient dimensioning of the crane.

Suspension / Tires:

6 - wheel - chassis with tandem axles;

- At least 600 mm wide tires.

Crane / Hydraulic:

- Boom reach at least 7 m,

Harvester

The main focus of the harvester is 20 - 45 cm BHD Retiring inventory

Suspension / Tires:

6 - wheel chassis with tandem axles;

- At least 600 mm wide tires.

Crane / hydraulics and unit:

- Crane with at least 10.0 m range;

- Maximum cutting diameter 550 mm in single-section, which is not grasped is to manually make.

605 fm

Working alone in the motor manual harvesting is prohibited.

Only oils and lubricants in biodegradable molded approved.

100 l) perform with.

Based on the equipment used in the operation of the State Forestry Director MV apply for orientation of the required performance classes the following descriptions:

Forwarder

By employed forwarders following ranges are back to:

Softwood and hardwood pulpwood <3 m

Pulpwood 3 m

Stem wood sections to 6 m

The play volume of a piece of wood can be higher than a cubic meter, so pay attention to sufficient dimensioning of the crane.

Suspension / Tires:

6 - wheel - chassis with tandem axles;

- At least 600 mm wide tires.

Crane / Hydraulic:

- Boom reach at least 9 m.

1016 fm

Working alone in the motor manual harvesting is prohibited.

Only oils and lubricants in biodegradable molded approved.

100 l) perform with.

Based on the equipment used in the operation of the State Forestry Director MV apply for orientation of the required performance classes the following descriptions:

Forwarder

By employed forwarders following ranges are back to:

Softwood and hardwood pulpwood <3 m

Pulpwood 3 m

Stem wood sections to 6 m

The play volume of a piece of wood can be higher than a cubic meter, so pay attention to sufficient dimensioning of the crane.

Suspension / Tires:

6 - wheel - chassis with tandem axles;

- At least 600 mm wide tires.

Crane / Hydraulic:

- Boom reach at least 9 m.

490 fm

Working alone in the motor manual harvesting is prohibited.

Only oils and lubricants in biodegradable molded to

Logging services

Landesforst Mecklenburg-Vorpommern – Anstalt des öffentlichen Rechts | Published November 22, 2016  -  Deadline January 3, 2017
Work will invariably in the forest of the Landes forest MV public institution instead. 

The power must be in the following timber harvesting technologies:

3.140 fm

16,365 fm

21,020 fm.

Skidding after logging by forestry office staff of ca.830 fm

Only oils and lubricants in biodegradable molded approved.

100 l) and spare tubes for hydraulics with out.

Machines used Based on the, in directing the operation of the National Forest MV, apply for orientation of the required performance classes the following descriptions:

Skidding Technology least rope tugs

60 KW

550 mm

- Ground care open and good self-cleaning tread

6 tons easier train

60 m

Forwarder

By employed forwarders following ranges are back to:

Softwood and Hardwood

Pulpwood <3 m

Pulpwood 3 m

Stem wood sections to 6 m

The play volume of a piece of wood can be higher than a cubic meter, so pay attention to sufficient dimensioning of the crane.

Chassis and Tyres:

6 - wheel - chassis with tandem axles

- At least 600 mm wide tires or belts,

- Wind-up tapes or at least partially wind-up

- Bands supporting and / or cross (classification on both groups and designation on machines Sheet required)

- Crane and hydraulic:

- Boom reach at least 9 m.

1.110 fm

Only oils and lubricants in biodegradable molded approved.

100 l) and spare tubes for hydraulics with out.

Machines used Based on the, in directing the operation of the National Forest MV, apply for orientation of the required performance classes the following descriptions:

Skidding Technology least rope tugs

60 KW

550 mm

- Ground care open and good self-cleaning tread

6 tons easier train

60 m

Forwarder

By employed forwarders following ranges are back to:

Softwood and Hardwood

Pulpwood <3 m

Pulpwood 3 m

Stem wood sections to 6 m

The play volume of a piece of wood can be higher than a cubic meter, so pay attention to sufficient dimensioning of the crane.

Chassis and Tyres:

6 - wheel - chassis with tandem axles

- At least 600 mm wide tires or belts,

- Wind-up tapes or at least partially wind-up

- Bands supporting and / or cross (classification on both groups and designation on machines Sheet required)

- Crane and hydraulic:

- Boom reach at least 9 m.

1.200 fm

Only oils and lubricants in biodegradable molded approved.

100 l) and spare tubes for hydraulics with out.

Machines used Based on the, in directing the operation of the National Forest MV, apply for orientation of the required performance classes the following descriptions:

Skidding Technology least rope tugs

60 KW

550 mm

- Ground care open and good self-cleaning tread

6 tons easier train

60 m

Forwarder

By employed forwarders following ranges are back to:

Softwood and Hardwood

Pulpwood <3 m

Pulpwood 3 m

Stem wood sections to 6 m

The play volume of a piece of wood can be higher than a cubic meter, so pay attention to sufficient dimensioning of the crane.

Chassis and Tyres:

6 - wheel - chassis with tandem axles

- At least 600 mm wide tires or belts,

- Wind-up tapes or at least partially wind-up

- Bands supporting and / or cross (classification on both groups and designation on machines Sheet required)

- Crane and hydraulic:

- Boom reach at least 9 m.

1.340 fm

Only oils and lubricants in biodegradable molded approved.

100 l) and spare tubes for hydraulics with out.

Machines used Based on the, in directing the operation of the National Forest MV, apply for orientation of the required performance classes the following descriptions:

skidding technology

At least with cable skidder

60 KW

550 mm

- Ground care open and good self-cleaning tread

6 tons easier train

60 m

Forwarder

By employed forwarders following ranges are back to:

Softwood and Hardwood

Pulpwood <3 m

Pulpwood 3 m

Stem wood sections to 6 m

The play volume of a piece of wood can be higher than a cubic meter, so pay attention to sufficient dimensioning of the crane.

Chassis and Tyres:

6 - wheel - chassis with tandem axles

- at least

  • 1