Public tenders for financial in Hronov Czech Republic

Find all Financial tenders in the world.
Finding business opportunities has never been easier.

Results for financial. Make a new search!

Supply CNC sinker EDM machines

Jirka a spol.,s.r.o. | Published June 16, 2016
cpvs

Delivery sinker EDM machines According to § 2e Act no. 320/2001 Coll., On financial control in public administration, the selected contractor is obliged to cooperate in the performance of financial control. Sponsor declares that this tender is not a public tender or a public promise and not a public contract implemented pursuant to Act no. 137/2006 Coll. on public procurement.

Delivery of induction heating

JIRKA a spol., s.r.o. | Published February 1, 2016
cpvs

The subject of the tender is the supply of induction heating. Technical parameters of induction heater - frequency converter: min. 150 kW Heated material: steel magnetic material heated diameter range: 25 to 70 mm Lengths of heated material: min. 1,3xD, max. 200 mm output temperature of the heated material: 1250 ° C (+/- 10%) power (quantity of heated material) min.250 kg / hour. Input isolation transformer 200 kVA (+/- 10%) Other features include: • Automatic creation of pieces • Monitoring the temperature of the heated material and the signal achievements, set the heating temperature (max. deviation +/- 5%) • Electronic record temperatures with output to a PC (memory min. 5000 records) Required documents: • Technical drawings inductor • Wiring electrical wiring diagram • Water cooling • Proof of measuring the output noise network devices Additional requirements are specified in the tender documents. According to § 2e Act no. 320/2001 Coll., On financial control in public administration, the selected contractor is obliged to cooperate in the performance of financial control. The sponsor claims that this selection process is not public tender or a public promise and not a public contract implemented pursuant to Act no. 137/2006 Coll. on public procurement.

Delivery forging screw press

JIRKA a spol., s.r.o. | Published October 27, 2015
cpvs

The subject of the tender is the supply forging, screw press, including tools. Technical parameters: Screw diameter: 260 mm (more informative) Nominal power: 750 tonnes (minimum of 700 t) Max. forging load of 1250 t (at least 1100 t) Limit Force 1550 t Table dimensions (width x depth) 760 x 575 mm (at least 700 x 500 mm) dimensions of the ram 610 x 610 mm (at least 550 x 550 mm, maximum 800 x 800 mm Height ram stroke 450 mm (minimum 400 mm) Number of strokes per minute 26 (at least 25) Engine power 37 kW (30 to 50 kW) maximum height of 5300 mm machine frame: cast iron, not welded According to § 2e Act no. 320/2001 Coll. on financial control in public administration, selected contractor is obliged to cooperate in the performance of financial control. Sponsor declares that this competition is not a public tender or a public promise and not a public contract implemented pursuant to Act no. 137/2006 Coll., on public Procurement.

Delivery of equipment for the surface treatment of forgings - blasting equipment

JIRKA a spol., s.r.o. | Published December 2, 2015
cpvs

The device is intended for operation of shot blasting the outer surface of the steel parts. Technical parameters: 4 mm - rotary table - preparation for structural change from a drum on a tabletop blast 320 kg 150 dm3 12 kg 300 mm 790 mm 7.5 kW direct drive (no transfer) 80 programs for blasting - speed projectile turbines controlled by frequency Converters - travel speed belt blasting controlled by frequency converters - throwing turbine equipped with hardened aftermarket 18,000 operating hours filter elements - Filter devices must not create a vacuum in the workplace - Výduch air back to the workplace - suction power has to be the same throughout the required life of the filter (min 18 000 hrs.) - Automatic regeneration of filter media - for an operating pressure of compressed air up to 0.7 MPa - lining the ceiling and sidewalls of the cabin made of manganese or hardened steel Additional general requirements - providing instructions for operation and maintenance in the Czech language - Wearing spare parts and electrical components for delivery within 24 hours, other spare parts within 48 hours - a description of the controls and machine control in the Czech language according to applicable laws and regulations - EC declaration of conformity issued by the competent authority 320/2001 Coll., on financial control in public managing the selected supplier is obliged to cooperate in the performance of financial control.
  • 1