Public tenders for environment in San-francisco United States

Find all Environment tenders in the world.
Finding business opportunities has never been easier.

Results for environment. Make a new search!

Z--REPLACE EXISTING OUTDOOR WOOD PATIO DECK AT BUILDING 501, NAVAL BASE POINT LOMA, SAN DIEGO, CALIFORNIA

Department of the Navy, Naval Facilities Engineering Command | Published March 2, 2015
cpvs

Work includes demolition and removal of existing wood decking, including ramps, stairs, handrails, benches, gazebo, glass windscreens, storage garage, and underlying support structure. Contractor will provide new foundation and substructure for natural wood decking. Frame around each existing tree and provide new powder-coated steel grating. Construct a new gazebo and new wet environment exterior lighting.

Refuse and Recycle Collection and Disposal Services - USCG Sector San Francisco CA

Department of Homeland Security, United States Coast Guard (USCG) | Published May 5, 2016  -  Deadline July 11, 2016
cpvs

This is a Synopsis/Pre-Solicitation Announcement. The U.S. Coast Guard (USCG) Shore Infrastructure Logistics Center (SILC), Alameda, CA has a requirement for REFUSE AND RECYCLING COLLECTION AND DISPOSAL SERVICES for the USCG Sector San Francisco and Base Alameda Housing located at Yerba Buena Island, San Francisco, California. The procurement will be solicited using unrestricted/full and open competition procedures. A firm-fixed price type contract will be awarded for a Base Period starting 1 OCTOBER 2016 through 30 SEPTEMBER 2017 plus FOUR one-year option periods for total contract duration not to exceed 60 months. If all options are exercised by the Government the contract terms will end 30 SEPTEMBER 2021. The Contractor shall furnish all labor, material, equipment, supplies, transportation, supervision and management necessary to perform all REFUSE AND RECYCLING COLLECTION AND DISPOSAL SERVICES for the aforementioned USCG location(s). All services shall be in strict adherence to the Performance Work Statement (PWS), as well as applicable local, state and federal regulations and/or Coast Guard station/location instructions, and shall be consistent with current industry practices in order to maintain a safe, clean and healthy environment for all the residents, military/civilian personnel, tenant commands and visiting members of the public. All required licenses and/or certifications required for the State of California must be identified and submitted with response to the solicitation. The North American Industry Classification System (NAICS) code is 562111 - Solid Waste Collection with a small business annual revenue size standard of $38.5M. See SBA's Small Business Size Regulations at https://www.sba.gov/content/part-121-small-business-size-regulations-1 Current contract information: Bay Cities Refuse Services, 2525 Garden Tract Road, Richmond, CA 94801. Awarded in the amount of $390,036.66 for the Base Year Period and FOUR (4) Option Years (10/01/2011- 09/30/2016). Interested parties should register in the System for Award Management (SAM). Information on SAM registration can be obtained at www.sam.gov. Contractors MUST be registered in the System for Award Management (SAM) in order to receive a contract award from any USCG activity. Ensure DUNS and CAGE Code numbers are provided with the proposal. DUNS number can be obtained via www.dnb.com or 1-800-333-0505. FAR 52.212-1 Instructions to Offerors - Commercial Items applies to this solicitation. The solicitation will utilize procedures and incorporate provisions and clauses in accordance with FAR Part 12 Acquisition of Commercial Items and FAR Part 15 Contracting by Negotiations. The solicitation Request for Proposal (RFP) will be available on or about 6 June 2016 and is anticipated to close 11 July 2016. Interested parties are hereby notified that the solicitation will be available exclusively on the Federal Business Opportunities (FedBizOpps, FBO) website, www.fbo.gov. The solicitation, attachments, and amendments will be published for viewing, printing, and downloading from the FBO website only. It is the potential offeror's responsibility to monitor FBO for the release of the solicitation and any subsequent amendments. No hardcopy/paper versions of the solicitation or amendments will be distributed. Prospective bidders shall locate the solicitation no. HSCG84-16-R-PAB0R3 and follow the instructions. All prospective bidders are responsible for visiting Federal Business Opportunities frequently and obtaining any amendments or other information pertaining to the solicitation. PLEASE READ THE ENTIRE SOLICITATION AND COMPLETE ALL REQUIRED DOCUMENTATION WHEN SUBMITTING YOUR PROPOSAL. The proposal must be submitted via regular and/or priority mail. No electronic copies of the proposal will be accepted. There will be a time period specified in the solicitation for the receipt of questions. Solicitation number is HSCG84-16-R-PAB0R3.

UNMANNED SYSTEM SUPPORT OPERATIONS IN HAZARDOUS AND CONTAMINATED ENVIRONMENTS (USSO)

Department of the Army, Army Contracting Command | Published June 13, 2016  -  Deadline June 24, 2016
cpvs

SPECIAL NOTICE - INTENT TO AWARD ON A SOLE SOURCE BASIS The Army Contracting Command (ACC), Aberdeen Proving Ground (APG), Research Triangle Park (RTP), Contracting Division (CD) intends to enter into a contract with GXM Consulting LLC in pursuant to FAR Part 6.302-1, Only One Responsible Source. The Government has a requirement to provide rapid commercial development of mobile software applications for use by military end users on smart phones and tablets on both unclassified and classified networks. This effort will take information from high end, high cost, legacy, systems and distribute it to the individual through low cost commercial off the shelf communication devices with government developed and commercially developed software applications. It will allow the Warfighter at the lowest levels to have unprecedented battlefield situational awareness and understanding.Interested parties must submit a capability statement for the purpose of determining whether to initiate a competitive procurement. This notice of intent is not a Request for Proposals, nor does it represent a commitment by government to pay for any costs incurred by the preparation and submission of data or any other costs incurred in response to this notification. No solicitation document is available. The associated North American Industry Classification System code for this procurement is 541712 (Research and Development in Physical Engineering and Life Sciences). All responsible sources may respond by submitting a written narrative statement of capability within 15 days of date of notice by COB (4:30PM) 24 June 2016, to Tristan Harley, Contracting Officer, at the email address listed below for consideration by the agency. Responses shall also include itemized pricing that is sufficient to make a determination that competition is feasible. Failure to provide the required information to enable the Government to make a determination may render the response unacceptable. The Government is not using the policies contained in Part 12, Acquisition of Commercial Items; however, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 45 days of this notice. The Government reserves the right to process this procurement as an Only One Responsible Source, pursuant to FAR Part 6.302-1, based on the responses received. Questions regarding this notice should be addressed to Tristan Harley with subject Innovative Transformative Applications via email at Tristan.d.harley.civ@mail.mil by COB (4:30PM) 24 June 2016.

WAVE SYSTEM PREVENTATIVE MAINTENANCE

Department of the Air Force, Air Education and Training Command | Published September 13, 2016  -  Deadline September 20, 2016
cpvs

This solicitation is prepared in accordance with the format in FAR Subpart 12.6 and in conjunction with FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate solicitation will not be issued.The Government intends to award one Firm-Fixed Price contract for the preventative maintenance of the 3-Screen Wide Area Virtual Environment (WAVE) System twice per year for one (1) base year + (4) option periods in support of Medical Readiness Training Center (MRTC) at JBSA-Camp Bullis, TX.See attached PWS for a detailed description of services and PMV objectives.Note: Quality Control Plan (QCP) shall be included with your proposal for evaluation & acceptance.Questions due:  1:00pm CST, Friday, 16 September 2016.Quotes due: 1:00pm CST, Tuesday, 20 September 2016.

INDEFINITE DELIVERY CONTRACT (IDC) ARCHITECT-ENGINEERING (A-E) SERVICES TO PROVIDE GEOTECHNICAL, STRUCTURAL, AND CIVIL ENGINEERING SERVICES FOR DISTRICT PROJECTS (PRIMARY). MAY INCLUDE CONSTRUCTION PHASE SERVICES FOR DISTRICT PROJECTS (SECONDARY).

Department of the Army, U.S. Army Corps of Engineers | Published March 11, 2016  -  Deadline April 11, 2016
cpvs

Description A. CONTRACT INFORMATION This contract(s) is being procured in accordance with the Brooks A-E Act (Public Law [P.L.] - 92-582) as implemented in FAR Subpart 36.6. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. These services will be for used primarily within the Corps of Engineers San Francisco District and secondarily for Districts within the South Pacific Division, military and civil boundaries, as determined by the Contracting Officer. Projects will primarily be within the San Francisco District boundaries. The contracts may also be used by other Districts within South Pacific Division (Sacramento, Los Angeles and Albuquerque Districts) to encompass the entire South Pacific Division geographical area of responsibility which can include CA, NV, UT and AZ and portions of OR, ID, CO and WY. This work will include services necessary to complete the assigned task orders for studies and designs. A specific scope of work and services will be issued with each task order.The required services are summarized as follows: 1. Design for new construction and modifications of projects for District programs and projects. 2. Preparation of Hazardous, Toxic, and Radioactive Waste (HTRW) investigation assessments, documents and reports for District projects. 3. Analysis and design for new District planning projects. The intent is to award up to two (2) A-E Single Award Task Order Contracts (SATOCs), with an estimated overall capacity of nine million nine hundred thousand dollars ($9.9M); ($4.95 million each) under a single solicitation. Each contract will have a guaranteed minimum amount of $2,500.00 for each of the awarded SATOCs. The period of performance for each SATOC shall include one 36-month base period and one 24-month option period, for an overall performance period of five years. If two contracts cannot be awarded, then the total capacity of $9.9M will be rolled into one contract if sufficient qualified firms are available. North American Industrial Classification System (NAICS) code is 541330, which has a small business size standard of $15,000,000 in average annual receipts. These contracts are set-aside for small businesses only. This announcement is a total Small Business (SB) set aside, which includes Small Disadvantaged Businesses, Section 8(a) Firms, HUBZone Small Businesses, Women-owned Small Businesses, Veteran-owned Small Businesses, Service-disabled Veteran-owned Small Businesses, and Historically Black Colleges or Universities/Minority Institutions. The contracts are anticipated to be awarded on or about July 2016. Solicitation period at minimum will be thirty (30) calendar days from the posting date. For Small Business entities, the total amount of A-E Services that can be provided for military construction work (MILCON) on this contract shall be no more than $400,000 in compliance with DFARS 219.502-1. Anti-Antiterrorism and Operations Security (AT/OPSEC) requirements as well as E-Verify (employment) will be required for all military or critical infrastructure projects; for other tasks, determination will be made per individual task order. For requirements, see attached form ENG FORM 6055, June 2015. Contract Type: Firm Fixed Price Contract (FFP). Work will be issued by negotiated firm-fixed-price task orders. The contracting officer will consider the following factors in deciding which contractor will be selected to negotiate an order: performance and quality of deliverables under the current contract, current capacity to accomplish the order in the required time, uniquely specialized experience, and equitable distribution of work among the contractors. Rates will be negotiated for each 12-month period of the contract. The anticipated award for this IDC is July 2016. If the option is exercised, the contract will end July 2021. The contract will have a 3-year base period and one 2-year option period. A Minimum Guarantee amount of $2,500.00 will apply to the first year of the base contract only. The option may be exercised at the discretion of the Government. The option may be exercised early if the total estimated value for the 3 year base contract period is exhausted or nearly exhausted. It will be stated in the contracts that notwithstanding the early exercise of the option the rates to be used for the option periods (if exercised early) shall be the rates that would have been in effect had the options not been exercised early, i.e., if the option is exercised two months prior to the end of the base contract performance period, the base year rates will be in effect for the first two months of the option period. To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instruction on registering with SAM, please see the SAM website at https://www.sam.gov/. No State-Level certifications shall be accepted. The Service Contract Act (SCA) (for reference see FAR 22.10) will apply to this acquisition. B. PROJECT INFORMATIONThe work to be performed under this contract shall consist of, but not be limited to furnishing all necessary labor, materials, supplies, and equipment required for professional (A-E) services as defined in the contract and as specified by individual task orders. All work shall be accomplished in full compliance with all applicable federal, state and local laws and regulations as well as with established Corps of Engineers manuals, policies, standards and practices, and other professional standards and practices as necessitated by project conditions or task order requirements. Examples of applicable Corps requirements include Engineer Regulation ER-1110-2-1150, the current Architectural/Engineering/Construction (A/E/C) Computer-Aided Design and Drafting (CADD) Standards, ERDC/ITL TR-12-1, CAD Drafting Standard, and Engineering and Construction Bulletin (ECB) No. 2012-22, Unified Facilities Guide Specifications (UFGS), and Spatial Data Standards for Facilities, Infrastructure and Environment (SDSFIE). Required services may also include, but are not limited to: quality control (QC) and/or quality assurance (QA) reviews of drawings, specifications, cost estimates and design analyses documents that are prepared by Government sources or other A-E firms. The work will include geotechnical engineering and design, engineering geology, civil engineering, cost engineering, environmental engineering, structural engineering, and Hazardous, Toxic, and Radioactive Waste (HTRW) expertise for planning, analyzing, designing, preparing contract documents, constructing, and inspecting District projects. Electrical, mechanical, and various scientific services may be requested as support disciplines for some task orders. Preparation of design-build scopes may also be requested. Each task order will have its own scope describing required services and schedule based on the complexity of the applicable project. Task Order proposals will be evaluated based on the level of effort for the scope of services developed for individual projects. In addition, the selected firm could be directed to provide supplemental technical and professional services in support of San Francisco District (SPN) normal and emergency activities. Additional information about the types of design scopes, investigations and studies is summarized below. The summary may not represent all types of tasks that may be requested. 1. Geotechnical Engineering: a. Engineering and Design: Conduct planning analyses, geotechnical engineering and design and preparation of plans and specifications for District design projects. Projects may include, but not be limited to: piers, roads, bridges abutments and supports, water retention basins, storm and sanitary sewer systems, levees, dams, weirs, environmental restoration, drainage, and utilities. In addition, requests to inspect completed projects may be made. b. Exploration and Laboratory Testing: Investigate terrestrial and maritime or water borne sites to define soil and/or rock properties, fault locations, and groundwater levels and flow. Drilling and analysis tasks may consist of core drilling, grab sampling, and instrumentation installation on either land or bodies of water such as bays and deep draft navigation channels. Laboratory testing will include typical physical geotechnical tests. Geophysical explorations utilizing techniques such as resistivity, seismic reflection, etc. may also be required. c. Construction Services: Geotechnical engineering services during construction may include QC or QA inspection, vibration monitoring, in-place density testing, pile load test monitoring, soil identification and testing, and compaction control observations and material testing. Tasks may require a geotechnical engineer or technician to be stationed on-site during construction. 2. Civil Engineering: Plan, design and prepare plans and specifications for projects such as piers, concrete and asphaltic concrete surfaces, bridges, water retention basins, storm, and sanitary sewers, levees, dams, weirs, environmental restoration, drainage, and utilities. Requests to inspect completed projects or projects under construction may be made. 3. Structural Engineering: Plan, design and prepare plans and specifications for District projects which may include structural elements of either horizontal or vertical projects. In addition, support may be required to provide either QA or QC on plans, specifications or construction. 4. Hazardous, Toxic, and Radioactive Waste (HTRW): Work may include, but is not limited to identifying, quantifying, and mitigating or removing HTRW for District projects. The A-E may be required to respond with the complete array of scientists, technical specialists and engineers needed. 5. Construction Cost Estimates: Prepare cost estimates in accordance with the task order project description. Planning studies must use a method that will establish reasonable supportable costs for comparison of alternate designs. Use MCACES (MII) to develop cost estimates for plans and specifications. C. SELECTION CRITERIA The selection criteria for this solicitation is listed below in descending order of importance. Criteria (1) and (2) are considered most important and are of equal importance; Criteria (3), (4) and (5) are of lesser importance and listed in descending order of importance. Criteria (6) and (7) are secondary equally weighted criteria and will only be used as a tie-breaker among firms ranked technically equal using the primary criteria. Primary Selection Criteria 1. Specialized experience and technical competence.Specialized Experience and Technical Competence (SF 330, Part I, Section F & G): Section F will provide examples of not more than 10 projects completed within the last 5 years that best demonstrate specialized experience and technical competency in: the areas listed above in section B, PROJECT INFORMATION; as outlined below; and of the prime firm and significant subcontractors in working together. Project examples submitted should be of completed projects (i.e. completed design). All projects cited shall identify design start/complete dates as well as the project size (cost and scope). (SF 330, Part I, Section F). Demonstrated experience and competency to complete: a. Geotechnical engineering and engineering geology services for: analyses, explorations and laboratory testing, design, plans and specifications, and construction oversight needed to construct and modify District projects. b. Civil engineering design services for: planning, design, and construction oversight of horizontal and vertical projects. c. Structural engineering services for: analysis, design, and engineering oversight during construction for structural elements of horizontal projects, vertical projects, as well as design and construction oversight of seismic and structural retrofits. d. HTRW services for: identifying, quantifying, mitigating or removing, and remediation of HTRW contaminated sites.e. Cost engineering services for: MCACES (MII) estimates and construction schedules. Prime Contractors that do not have cost estimators on staff will be evaluated based on their subcontractor's MCASES MII experience. Cost Estimators shall have the capability and experience to prepare MCACES (MII) cost estimates and schedules on large, medium, and small projects. f. Experience preparing documentation including preparing Design Documentation Reports (DDR), Engineering Documentation Reports (EDR), Engineering Appendices and other engineering reports. g. Experience with CADD to produce engineering drawings on a computer aided design and drafting (CADD) system that meets all relevant USACE engineering standards. h. Experience preparing specifications utilizing SpecsIntact and UFGS. Ability to prepare complete detailed construction drawings and specifications using Government guide specifications format shall be required. I. Experience preparing GIS data that meets Corps of Engineers mandated Spatial Data Standards for Facilities, Infrastructure and Environment. Prime Contractors that do not have GIS capability will be evaluated based on their subcontractor's GIS experience.2. Professional qualifications. Firms shall demonstrate personnel qualifications and specialized experience for key disciplines. Evaluation of professional qualifications will consider education, training, professional registrations relevant experience in design of geotechnical and civil engineering projects/studies that were prepared for Civil Works type projects, vertical projects such as buildings, and longevity with the firm (three years minimum). Each engineer and manager shall be registered in the United States and have at least five (5) year's experience in the discipline in which he/she will be working. Experience working on applicable flood protection levees, dams and structures projects, and building foundations is desirable and should be identified. (SF 330, Part I, Sections E & G). Resumes of qualified professional personnel who are certified, registered, and highly trained in the following key disciplines shall be provided. One resume shall be provided for the following disciplines unless otherwise noted: Project Managers (2 ea), Civil Engineers (2 ea), Geotechnical Engineers (3 ea), Structural Engineer, Construction Engineer, Environmental Engineer, Mechanical Engineer, Electrical Engineer, Cost Engineer, Geologist/Seismologist, GIS Specialist, CADD Designer and CADD Operator. The evaluation will consider education, training, registration, and overall relevant experience. 3. Past performance. Past performance on Department of Defense (DoD) and other federal contracts with respect to the quality of work, cost control (maintaining the project construction cost below the programmed amount), and compliance with performance schedules, as determined by CPARS/ACASS and other sources. Past Performance Questionnaires (PPQ) may be used to provide or supplement a firm's past performance with other than U.S. Government clients. Firms which choose to use the PPQ may obtain a PPQ standard form by submitting a request to the below referenced POC via email. Projects where the prime contractor performed 50% or more of the work with in-house forces will be weighted more heavily than projects performed predominantly by proposed subcontractors. 4. Capacity to accomplish the work. Adherence to project schedules for all projects is critical to the Government. Completion within the schedule requires the engagement of sufficient and competent staff and subcontractors. Firms also must have the ability to provide a minimum number of personnel for inspections, explorations, data collection or similar services. Firms must demonstrate the capacity to accomplish multiple task orders in multiple locations simultaneously. Small business firms shall demonstrate the capacity to accomplish at least two (2) $250,000 individual task orders simultaneously. 5. Knowledge of Locality. Firms must demonstrate familiarity with the San Francisco District and SPD areas, primarily California, displaying knowledge of local conditions such as the soil conditions, seismic requirements, environmental regulations and regulatory requirements of the region. This knowledge can be demonstrated by showing projects designed for or constructed in these areas. Secondary Selection Criteria Secondary selection criteria will only be considered in the event of needing a tie-breaker for ranking based on the primary criteria. Secondary Selection Criteria shall consist of (IAW DFARS 236.602-1): 6. SB and SDB Participation. Extent of participation of small or disadvantaged businesses, or woman-owned small businesses, and participation of historically black colleges and universities or minority institutions in the proposed contract team,measured as a percentage of the total estimated efforts. 7. Volume of DOD contract awards received in the last 12 months.E. SUBMISSION REQUIREMENTS Interested Architect-Engineer (A-E) firms having the capabilities to perform this work must submit one (1) copy of SF 330 Part I, and one (1) copy of SF 330 Part II for the prime firm and all consultants/subcontractors including related services questionnaire regarding past performance on non-Government projects to, ATTN: Roberto Escobedo (CESPN-CT), 1455 Market Street, Cubicle 1742C, San Francisco, CA 94103-1398. Excluding the page count for resumes and the SF330 Part II, the SF 330 shall not exceed 50 single pages (25 pages if double sided), 8 ½ x 11, not counting any dividing page used to identify each SF 330 Section; no more than (3) three pages 11 x 17 for organization charts, all using 12 font in either Times New Roman, Arial or Courier. Font size for tables, figures or charts is at the discretion of the submitter, but it must be legible and large enough to be easily read by the reviewer. In block E of the SF 330 provide resumes for all key team members, whether with the prime firm or a subcontractor; list specific project experience for key team members; and indicate the team members role on each listed project (i.e. project manager, design engineer, etc.). In block D of the SF 330, provide the quality management plan and organization chart for the proposed team. In block H of the SF 330 indicate the number and amount of fees awarded on DoD (Army, Navy, and Air Force) contracts during the 12 months prior to this notice, including change orders and supplemental agreements for the submitting office only. A task specific quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission. In addition to a hard copy of the SF 330s and attachments, ONE (1) additional copy shall be submitted electronically on a CD. The most highly qualified firm(s) may be required to provide in-person presentations prior to final selection and will be advised accordingly. Responses received by (3:00 pm local time) the day of the closing date will be considered for selection. If the closing date is a Saturday, Sunday or Federal holiday, the deadline is the close of business on the next business day. No other notification will be made and no further action is required. All responsible sources may submit the required SF 330, which shall be considered by the agency. This is not a request for proposal and no other general notification will be made. Use solicitation number listed (W912P7-16-R-0003) in your SF 330 submission package. OFFERORS QUESTIONS AND COMMENTSQuestions regarding this announcement must be in writing and shall be addressed to Mr. Roberto Escobedo via email at Roberto.L.Escobedo@usace.army.mil. All questions must be submitted no later than 25 March 2016 at 2:00 p.m. Pacific Time to allow time for a response. Point of Contact: USACE San Francisco District.Attn: Roberto Escobedo1455 Market Street Cubical 1742CSan Francisco, CA, 94103-1398 Email: Roberto.L.Escobedo@usace.army.milOffice Phone #: 415-503-6949

H -- Information Operations (IO) and Meteorology and Oceanography (METOC) Engineering Services and Software Development

Department of the Navy, Space and Naval Warfare Systems Command | Published February 11, 2016  -  Deadline May 18, 2016
cpvs

The Space and Naval Warfare Systems Center, Pacific (SSC Pacific) intends to issue Request for Proposal (RFP) No. N66001-16-R-0011 for Information Operations (IO) and Meteorology and Oceanography (METOC) Engineering Services and Software Development. Multiple awards are anticipated. Space and Naval Warfare (SPAWAR) Systems Center (SSC), Pacific, has a vision of being the Nation's pre-eminent Technical Leader for integrated Command, Control, Communications, Computers and Intelligence (C4I) needs of the Navy. The Navy's C4I systems are vital to the goal of achieving and maintaining Information Warfare. A key pillar of Information Warfare is Battlespace Awareness. SSC Pacific provides solutions for many systems that contribute to Battlespace Awareness, including IO and METOC. Battlespace awareness consists of three key environments: Information, Physical and Threat. The threat environment is addressed by Intelligence Surveillance and Reconnaissance (ISR) systems that are largely supported by systems operating at security levels outside the scope of this contract. The information environment is addressed by IO systems and the physical environment by METOC. Under this construct, SSC Pacific supports and assists with the planning, integration, maintenance, and operation of systems which enable future synergy and seamless integration of IO and METOC information across the Navy's C4I systems. Requirements within this Statement of Work (SOW) are follow-on efforts to task orders listed below. The contracts, task orders, and incumbent contractors are: 1. Forward Slope, Inc. SSC Pacific Contract No. N66001-10-D-0014 task order 0007 which expired April 2014 2. General Dynamics Information Technology (GDIT) SSC Pacific Contract No. N66001-12-D-0112 task order 0001 which expires May 2016 For this requirement, a market survey to determine small business capability was posted on SPAWAR E-Commerce Central on 23 October 2015, reference number MKTSVY- 110366. Based upon evaluation of the responses to the market survey, SSC Pacific intends to compete the full scope of the requirement on an unrestricted basis (i.e., a full and open competition) with a reserve for one or more small business concerns. The full scope of the requirement is described in the attached Draft SOW. Both large and small businesses can compete for the Unrestricted multiple award contract (MAC). This effort will be formally solicited and is anticipated to result in a MAC. SSC Pacific intends on awarding multiple Cost-Plus-Fixed-Fee (CPFF), Indefinite-Delivery, Indefinite- Quantity (IDIQ) contracts. The prospective contracts are expected to have a three-year base period with one two-year option period. Task orders will be issued for individual efforts. The estimated level of effort (LOE) for the total requirement is 655,200 hours. This equates to approximately 63 Full Time Equivalents (FTEs) annually. Each FTE is estimated to be 2,080 hours per year. The North American Industry Classification System (NAICS) code for this procurement is 541330 with a size standard of $38.5 million. The estimated value of the acquisition is $81 million. A Bidders Mailing List will not be established and hard copies of documents will not be provided. The solicitation will only be available electronically on the Space and Naval Warfare Systems Command E-Commerce Web Page at https://e commerce.spawar.navy.mil under SSC Pacific - Open Solicitations. Any amendments, when issued, will also be available only on this web site. Matters posted on the web site are not terms of the solicitation unless the solicitation is written or amended to include such matters. It is estimated that the solicitation will be released in April 2016. FIRMS ARE ENCOURAGED TO REVIEW THE WEB SITE REGULARLY FOR UPDATED INFORMATION.

INDEFINITE DELIVERY CONTRACT (IDC) FOR ARCHITECT-ENGINEERING (A-E) SERVICES FOR HYDRAULICS AND HYDROLOGY, GEOMORPHOLOGY, COASTAL AND WETLANDS ENGINEERING SERVICES TO SUPPORT DISTRICT PROJECTS (PRIMARY). MAY INCLUDE CONSTRUCTION PHASE SERVICES FOR DISTRICT

Department of the Army, U.S. Army Corps of Engineers | Published March 16, 2016  -  Deadline April 18, 2016
cpvs

DescriptionA. CONTRACT INFORMATIONThis contract(s) is being procured in accordance with the Brooks A-E Act (Public Law [P.L.] - 92-582) as implemented in FAR Subpart 36.6. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. These services will be for used primarily within the Corps of Engineers San Francisco District and secondarily for Districts within the South Pacific Division, military and civil boundaries, as determined by the Contracting Officer. Projects will primarily be within the San Francisco District boundaries. The contracts may also be used by other Districts within South Pacific Division (Sacramento, Los Angeles and Albuquerque Districts) to encompass the entire South Pacific Division geographical area of responsibility which can include CA, NV, UT and AZ and portions of OR, ID, CO and WY.This work will include services necessary to complete the assigned task orders for studies and designs. A specific scope of work and services will be issued with each task order.The required services are summarized as follows: 1. Design for new construction and modifications of projects for District programs and projects. 2. Planning analysis and design for new Civil Works projects and modification of existing Civil Works projects. 3. Analysis and design for new District planning projects. The intent is to award up to two (2) A-E Single Award Task Order Contracts (SATOCs), with an estimated overall capacity of nine million nine hundred thousand dollars ($9.9M); ($4.95 million each) under a single solicitation. Each contract will have a guaranteed minimum amount of $2,500.00 for each of the awarded SATOCs. The period of performance for each SATOC shall include one 36-month base period and one 24-month option period, for an overall performance period of five years. If two contracts cannot be awarded, then the total capacity of $9.9M will be rolled into one contract if sufficient qualified firms are available. North American Industrial Classification System (NAICS) code is 541330, which has a small business size standard of $15,000,000 in average annual receipts. These contracts are set-aside for small businesses only. This announcement is a total Small Business (SB) set aside, which includes Small Disadvantaged Businesses, Section 8(a) Firms, HUBZone Small Businesses, Women-owned Small Businesses, Veteran-owned Small Businesses, Service-disabled Veteran-owned Small Businesses, and Historically Black Colleges or Universities/Minority Institutions. The contracts are anticipated to be awarded on or about July 2016. Solicitation period at minimum will be thirty (30) calendar days from the posting date. For Small Business entities, the total amount of A-E Services that can be provided for military construction work (MILCON) on this contract shall be no more than $400,000 in compliance with DFARS 219.502-1. Anti-Antiterrorism and Operations Security (AT/OPSEC) requirements as well as E-Verify (employment) will be required for all military or critical infrastructure projects; for other tasks, determination will be made per individual task order. For requirements, see attached form ENG FORM 6055, June 2015. Contract Type: Firm Fixed Price Contract (FFP). Work will be issued by negotiated firm-fixed-price task orders. The contracting officer will consider the following factors in deciding which contractor will be selected to negotiate an order: performance and quality of deliverables under the current contract, current capacity to accomplish the order in the required time, uniquely specialized experience, and equitable distribution of work among the contractors. Rates will be negotiated for each 12-month period of the contract. The anticipated award for this IDC is July 2016. If the option is exercised, the contract will end July 2021. The contract will have a one 36-month base period and one 24-month option period. A Minimum Guarantee amount of $2,500 will apply to the first year of the base contract only. The option may be exercised at the discretion of the Government. The option may be exercised early if the total estimated value for the 3 year base contract period is exhausted or nearly exhausted. It will be stated in the contracts that notwithstanding the early exercise of the option the rates to be used for the option periods (if exercised early) shall be the rates that would have been in effect had the options not been exercised early, i.e., if the option is exercised two months prior to the end of the base contract performance period, the base year rates will be in effect for the first two months of the option period. To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instruction on registering with SAM, please see the SAM website at https://www.sam.gov/. No State-Level certifications shall be accepted. The Service Contract Act (SCA) (for reference see FAR 22.10) will apply to this acquisition. B. PROJECT INFORMATION The work to be performed under this contract shall consist of, but not be limited to furnishing all necessary labor, materials, supplies, and equipment required for professional (A-E) services as defined in the contract and as specified by individual task orders. All work shall be accomplished in full compliance with all applicable federal, state and local laws and regulations as well as with established Corps of Engineers manuals, policies, standards and practices, and other professional standards and practices as necessitated by project conditions or task order requirements. Examples of applicable Corps requirements include Engineer Regulation ER-1110-2-1150, the current Architectural/Engineering/Construction (A/E/C) Computer-Aided Design and Drafting (CADD) Standards, ERDC/ITL TR-12-1, CAD Drafting Standard, and Engineering and Construction Bulletin (ECB) No. 2012-22, Unified Facilities Guide Specifications (UFGS), and Spatial Data Standards for Facilities, Infrastructure and Environment (SDSFIE). The preferred modeling software to be used on Corps projects are Corps developed software (such as ADH (2D and 3D), CMS, STWAVE, ADCIRC, HEC-HMS, HEC-RAS, FLO-2D and others). Required services may also include, but are not limited to: quality control (QC) and/or quality assurance (QA) reviews of drawings, specifications, cost estimates and design analyses documents that are prepared by Government sources or other A-E firms. Services are required for hydraulic and hydrologic engineering, coastal and wetland engineering, geomorphic analyses and design, dredging, port and waterfront design to support District projects. This work will include all A-E and related services necessary to: perform coastal, hydrologic and hydraulic analyses and studies, including numerical and physical hydraulic modelling and analyses for riverine, estuarine and coastal systems; conduct geomorphic analyses and channel design, channel erosion and sediment engineering; perform flood plain analyses; and develop hydraulic designs. Types of task order submittals may include, but are not limited to: inspection and condition assessment reports; feasibility level engineering alternatives analyses and basis of repair/design reports; design documentation reports; engineering calculations; engineering plans and specifications; construction cost estimates; 1D, 2D or 3D hydrodynamic analysis including water quality and sedimentation; analyses to support water management including reservoir and water quality modeling; and technical and literature research and reviews. Study services could include environmental, ecological, environmental compliance, cultural, economic, water resources planning, and public involvement. Each task order will have its own scope describing required services and schedule based on the complexity of the applicable project. Task Order proposals will be evaluated based on the level of effort for the scope of services developed for individual projects. In addition, the selected firm could be directed to provide supplemental technical and professional services in support of SPN's normal and emergency activities. Additional information about scope of design, investigations and studies is summarized below. The summary may not represent all types of tasks that may be requested. 1. Hydrologic Studies. Use hydrologic techniques to evaluate such items as the rainfall-runoff characteristics of watersheds to include frequency analyses of stream flow data, precipitation-runoff simulation of storm events, stream flow and reservoir routing, flood routing, rainfall-runoff modeling, water management, probable maximum flood and probable maximum precipitation determination, steady and unsteady hydraulic modeling, 2-dimensional floodplain modeling, dam break studies, flood risk reduction studies, risk and uncertainty analyses, and evaluation of levee and flood risk reduction channel performance. Watershed studies may also utilize an integrated modeling approach using HEC-WAT as the modeling platform. 2. Riverine Hydraulic Analyses. Analyse flow conditions in natural and modified streams to develop water surface profiles and to identify factors which affect flow conditions which may include sediment transport (i.e. scour and deposition) in channels and reservoirs. 3. Environmental and Ecological Modelling and Analysis. Assess Total Maximum Daily Load (TMDL) and other environmental compliance requirements, and support environmental analyses of watersheds and associated river systems. Develop environmental flow information and analyses to assess environmental window restrictions for construction and dredge permitting. 4. Sedimentation Engineering and Geomorphic Analyses. Conduct sediment engineering and geomorphic analyses including, but not limited to: watershed sediment yield studies; development of sediment budgets; sediment transport analyses; channel stability analyses; geomorphic analyses and assessments; assessment of present, future and with project conditions; stream-bank stabilization design; stream diversion structure design; pollution removal and restoration, and dam removal and controlled release of water. 5. Flood Plains. Delineate flood plains for various hypothetical and historic floods, including residual flood plains, which depict "post project" conditions. 6. Hydraulic Design. Design structures including, but not limited to: open channels, leveed channels, floodwalls, culverts, and other miscellaneous civil design works. The design of dam and reservoir structures, such as outlet works, control gates, and spillways could also be required, as well as risk based analyses associated with determining the hydraulic reliability of flood damage reduction facilities. 7. Water Supply and/or Flood Control Storage Requirements. Conduct studies including, but not limited to: determining water supply and flood control storage requirements; and investigation of existing or planned flood control and water supply reservoirs or reservoir systems to optimise the operation of the reservoirs or to determine the environmental (e.g. water quality) effects of the reservoirs. 8. Coastal and Estuarine Engineering Analyses. Perform coastal and estuarine engineering analyses and reports including such analyses as: tidal circulation, currents, and sediment transport analyses; navigation, and environmental/wetlands restoration projects; sediment budgets; estuarine and coastal flood hazards; shallow and deep draft navigation channel design; navigation channel shoaling analysis; site evaluation of beneficial use and near shore placement of dredged material; and assessment of dredging needs. Other work may include tidal data analysis, wind buoy data, and associated statistical analysis necessary to develop wave climates, probabilistic wind data and wave data to support designs, and application of sea level change. 9. Dredging Design. Perform design work to maintain existing shipping channels; deepen existing channels, and to generate upland dredge material disposal sites to accommodate dredge material placement. Provide design and engineering support for various types of maintenance dredges, dredging discharge systems, and considerations associated with upland disposal. Dredge planning work for channel deepening feasibility studies to include all required aspects including disposal site identification, mitigation procedures to mitigate dredging, and disposal impacts on wildlife and vegetation. 10. Cost Engineering. Prepare cost estimates in accordance with the task order project description. Planning studies must use a method that will establish reasonable supportable costs for comparison of alternate designs. Use MCACES (MII) to develop cost estimates for plans and specifications. C. SELECTION CRITERIA The selection criteria for this solicitation are listed below in descending order of importance. Criteria (1) and (2) are considered most important and of equal importance; Criteria (3), (4) and (5) are of lesser importance and listed in descending order of importance. Criteria (6) and (7) are secondary equally weighted criteria and will only be used as tie-breakers among firms ranked technically equal using the primary criteria. Primary Selection Criteria: 1. Specialized experience and technical competenceSpecialized Experience and Technical Competence (SF 330, Part I, Section F & G): Section F will provide examples of not more than 10 projects completed within the last 5 years that best demonstrate specialized experience and technical competency in: the areas listed above in section B, PROJECT INFORMATION; as outlined below; and of the prime firm and significant subcontractors in working together. Project examples submitted should be of completed projects (i.e. completed design). All projects cited shall identify design start/complete dates as well as the project size (cost and scope). (SF 330, Part I, Section F). Prime Contractors that do not have specific experience in the following types of tasks will be evaluated based on their subcontractors' experience. However, projects where the prime contractor performed 50% or more of the work with in-house forces will be weighted more heavily than projects performed predominantly by proposed subcontractors. Demonstrated experience and competency to complete:a. Hydrologic Studies: Hydrologic analyses to evaluate rainfall runoff characteristics of watersheds. b. Riverine Hydraulic Analyses: Hydrologic and hydraulic modeling for riverine environments. c. Environmental and Ecological Modelling and Analysis: Environmental compliance and environmental analyses of watersheds and associated river systems. d. Sedimentation Engineering and Geomorphic Analyses: Geomorphic and sediment transport analyses. e. Flood Plains: Analyses and delineation of floodplains for existing (without-project) condition and residual floodplains for with project conditions. f. Hydraulic Design: Open channel flow design for subcritical, supercritical and mixed flow regimes; design of structures including, but not limited to levees, floodwalls, culverts, energy dissipaters, weirs, interior drainage facilities, conduits, and bank protection. g. Water Supply and/or Flood Control Storage Requirements: Flood forecasting and reservoir operations studies. h. Coastal and Estuarine Engineering Analyses: Estuarine and coastal flood hazards; coastal structure design; wind hind casting and propagation, shoreline change and geometric models for storm-induced beach profiles changes; wave run-up and diffraction, and tidal analysis. Ability to develop 3D hydrodynamic models to assess baroclinic transport patterns in the San Francisco Bay and delta.i. Dredging Design: Design and support for various types of maintenance dredges; dredging discharge systems; and considerations associated with beneficial reuse of dredged material. j. Cost Engineering: Prepare MII estimates using MCACES (MII) software, and construction schedules. Bulletin System (CBBS) and the Rechecks review comment 2. Professional qualifications. Firms shall demonstrate personnel qualifications and specialized experience for key disciplines. Evaluation of professional qualifications will consider education, training, professional registrations relevant experience in design of hydrologic and hydraulic engineering projects/studies, and longevity with the firm (three years minimum). Each engineer and manager shall be registered in the United States and have at least five (5) years' experience in the discipline in which he/she will be working. Experience working on applicable flood protection levees, dams and structures projects is desirable and should be identified. (SF 330, Part I, Sections E & G). The evaluation will consider education, training, registration, and overall relevant experience. Resumes of qualified professional personnel who are certified, registered, and highly trained in the following key disciplines shall be provided. If not otherwise noted one resume shall be provided for the following disciplines unless otherwise noted: 1. Project managers (team leaders) (2 at minimum) must be registered Professional Engineer and have at least five (5) years of experience in project management of civil engineering projects. Experience working on USACE projects is desirable. 2. Hydraulic engineer with experience in hydraulic design of flood control channels, stream bank protection, levees, floodwalls, and drainage structures, ecosystem restoration, watershed and riverine sedimentation and hydrology. 3. Coastal engineer with experience in design and maintenance of hard and soft coastal structures, sediment management and beach nourishment, and hydrodynamic modeling to support design of a range of coastal and harbor projects. 4. Dredging engineer with experience in all aspects of dredging projects, from the dredging itself, through disposal, migration projects, environmental windows, and compliance. 5. Hydraulic engineer with experience in water management, such as development of water control plans, and analysis to support water management decisions such as reservoir modeling for conservation, flood control and water quality. 6. Hydraulic engineer with experience in riverine, estuarine, tidal and wetland environmental restoration studies, design, monitoring and adaptive management. 7. Sedimentation engineer or Fluvial/Coastal Geomorphologist with experience in engineering and investigations to: support flood risk reduction, navigation and environmental studies and project designs for inland and coastal watersheds and estuaries; and support sediment management decisions, federal and state regulatory compliance, and beneficial re-use of dredged material. 3. Past performance: Past performance on Department of Defense (DoD) and other contracts with respect to the quality of work, cost control (maintaining the project construction cost below the programmed amount), and compliance with performance schedules, as determined by CPARS and other sources. Past Performance Questionnaires (PPQ) may be used to provide or supplement a firm's past performance with other than U.S. Governmental clients. Firms which choose to use the PPQ may obtain a PPQ standard form by submitting a request to the below referenced POC via email. Projects where the prime contractor performed 50% or more of the work with in-house forces will be weighted more heavily than projects performed predominantly by proposed subcontractors. 4. Capacity to accomplish the work: Adherence to project schedules for all projects is critical to the Government. Completion within the schedule requires the engagement of sufficient and competent staff and subcontractors. Firms also must have the ability to provide a minimum number of personnel for inspections, explorations, data collection or similar services. Firms must demonstrate the capacity to accomplish multiple task orders in multiple locations simultaneously. Firms shall demonstrate the capacity to accomplish at least two (2) $250,000 individual task orders simultaneously. 5. Knowledge of Locality: Firms must demonstrate familiarity with the San Francisco District and SPD areas, primarily California, by displaying knowledge of local conditions, such as the impact of king tides, and of the permitting requirements of state and local agencies such as BCDC and the RWQCB. This knowledge can be demonstrated by showing projects designed for or constructed in these areas. Secondary Selection Criteria: Secondary selection criteria will only be considered in the event of needing a tie-breaker for ranking based on the primary criteria. Secondary Selection Criteria shall consist of (IAW DFARS 236.602-1): 6. SB and SDB Participation [Defense PGI 236.602-1(a)(6)(C)]. The extent ofparticipation of SB, SDB, historically black colleges and universities (HBCU), and minority institutions (MI) will be measured as a percentage of the total anticipated contract effort, regardless of whether the SB, SDB, HBCU or MI is a prime contractor, subcontractor, or joint venture partner. The greater the participation, the greater the consideration. 7. Volume of DOD contract awards received in the last 12 months. E. SUBMISSION REQUIREMENTS Interested Architect-Engineer (A-E) firms having the capabilities to perform this work are invited to submit must submit one (1) copy of SF 330 Part I, and one (1) copy of SF 330 Part II for the prime firm and all consultants/subcontractors including related services questionnaire regarding past performance on non-Government projects to ATTN: Roberto Escobedo (CESPN-CT), 1455 Market Street, Cubicle 1742C, San Francisco, CA 94103-1398. The SF 330 shall not exceed 50 single pages (25 pages if double sided) 8 ½ x 11, not counting any dividing page used to identify each SF 330 Section; no more than (3) three pages 11 x 17 for organization charts, all using 12 font in either Times New Roman, Arial or Courier. Font size for tables, figures or charts is at the discretion of the submitter, but it must be legible and large enough to be easily read by the reviewer. In block E of the SF 330 provide resumes for all key team members, whether with the prime firm or a subcontractor; list specific project experience for key team members; and indicate the team members role on each listed project (i.e. project manager, design engineer, etc.). In block D of the SF 330, provide the quality management plan and organization chart for the proposed team. In block H of the SF 330 indicate the number and amount of fees awarded on DoD (Army, Navy, and Air Force) contracts during the 12 months prior to this notice, including change orders and supplemental agreements for the submitting office only. A task specific quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission. In addition to all the hard copies of the SF 330s and attachments, ONE (1) additional copy shall be submitted electronically on a CD. The most highly qualified firm(s) may be required to provide in-person presentations prior to final selection and will be advised accordingly. Responses received by (3:00 pm local time) the day of the closing date will be considered for selection. If the closing date is a Saturday, Sunday or Federal holiday, the deadline is the close of business on the next business day. No other notification will be made and no further action is required. All responsible sources may submit the required SF 330, which shall be considered by the agency. This is not a request for proposal and no other general notification will be made. Use solicitation number listed (W912P7-16-R-0004) in your submission package. OFFERORS QUESTIONS AND COMMENTSQuestions regarding this announcement must be in writing and shall be addressed to Mr. Roberto Escobedo via email at Roberto.L.Escobedo@usace.army.mil. All questions must be submitted no later than 1 April 2016 at 2:00 p.m. Pacific Time to allow time for a response.Point of Contact: USACE San Francisco District.Attn: Roberto Escobedo1455 Market Street Cubical 1742CSan Francisco, CA, 94103-1398 Email: Roberto.L.Escobedo@usace.army.milOffice Phone #: 415-503-6949

D -- SOLE SOUCE ANNOUNCEMENT LATTIX SUBSCRIPTION PR#1300581658

Department of the Navy, Space and Naval Warfare Systems Command | Published July 22, 2016  -  Deadline July 27, 2016
cpvs

Space and Naval Warfare Systems Center, Pacific (SSC Pacific) intends to award a firm fixed price purchase order on a sole source basis LATTIX INC. The requirement is for the purchase is for the software and maintenance for service center in support of rapid integration test environment (RITE) Lattix Architect. This notice of intent is not a request for quote. A determination by the government not to compete based upon responses to this notice is solely at the discretion of the government. Questions by phone or fax will not be considered. Acquisition of Commercial Items under FAR Part 12 and Simplified Acquisitions Procedures under FAR Part 13 apply. The applicable NAICS Code is 511210 and the business size standard is $38.5 MILLION. The point of contact for this announcement is Danilo Ibarra at danilo.ibarra@navy.mil. To respond to this announcement, you must be registered to the SPAWAR E-Commerce website at https://e-commerce.sscno.nmci.navy.mil. All responding vendors must be registered to the System for Award Management (SAM) prior to award of contract. Information can be found at https://www.sam.gov/

Janitorial Services, San Francisco, CA

Department of Commerce, National Oceanic and Atmospheric Administration (NOAA) | Published April 19, 2016  -  Deadline May 3, 2016
cpvs

COMBINED SYNOPSIS/SOLICITATIONJanitorial Services, San Francisco, CA (I) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (II) This solicitation is issued as a request for quotation (RFQ). Submit written quotes on RFQ NumberRA-133C-16-RQ-0361BS. (III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87. (IV) This solicitation is being issued as a Total Small Business Set-Aside. The associated NAICS code is 561720. The small business size standard is $18.0M. (V) This combined solicitation/synopsis is for purchase of the following commercial services: Line Item 0001 - Base Year; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for janitorial services at the Greater Farallones National Marine Sanctuary, 991 Marine Drive, The Presidio, San Francisco, CA 94129, in accordance with the Statement of Work for the period of twelve months. Line Item 1001 - Option Year 1; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for janitorial services at the Greater Farallones National Marine Sanctuary, 991 Marine Drive, The Presidio, San Francisco, CA 94129, in accordance with the Statement of Work for the period of twelve months. Line Item 2001 - Option Year 2; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for janitorial services at the Greater Farallones National Marine Sanctuary, 991 Marine Drive, The Presidio, San Francisco, CA 94129, in accordance with the Statement of Work for the period of twelve months. Line Item 3001 - Option Year 3; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for janitorial services at the Greater Farallones National Marine Sanctuary, 991 Marine Drive, The Presidio, San Francisco, CA 94129, in accordance with the Statement of Work for the period of twelve months. Line Item 4001 - Option Year 4; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for janitorial services at the Greater Farallones National Marine Sanctuary, 991 Marine Drive, The Presidio, San Francisco, CA 94129, in accordance with the Statement of Work for the period of twelve months. (VI) Description of requirements is as follows:See attached Statement of Work which applies to Base Year and all Option Years 1 - 4, and attached Department of Labor Wage Rates: WD 1974-1257, Revision No. 37, dated 01/05/2016. (VII) Date(s) and place(s) of delivery and acceptance: Greater Farallones National Marine Sanctuary, 991 Marine Drive, The Presidio, San Francisco, CA 94129. Period of performance shall be:Base Year for a twelve month period 06/01/2016 through 05/31/2017. Option Period 1 for a twelve month period 06/01/2017 through 05/31/2018.Option Period 2 for a twelve month period 06/01/2018 through 05/31/2019.Option Period 3 for a twelve month period 06/01/2019 through 05/31/2020.Option Period 4 for a twelve month period 06/01/2020 through 05/31/2021. (VIII) FAR 52.212-1, Instructions to Offerors -- Commercial Items (Oct 2015), applies to this acquisition. NOTICE TO OFFERORS: Instructions for submitting quotations under this request for quote must be followed. Failure to provide all information to aid in the evaluation may be considered non-responsive. Offers that are non-responsive may be excluded from further evaluation and rejected without further notification to the offeror.1. Quotes shall be fully executed and returned on the Standard Form (SF) 18 and any acknowledgements of solicitation amendments on the SF 30.2. Submit quotations to the office specified in this solicitation at or before the time specified in the solicitation. E-mail quotes are acceptable and can be sent to Brenda.S.Summers@noaa.gov.3. At a minimum the contractor shall provide the following information:a) Point of contact name, telephone and E-mail address.b) DUNS Number4. Provide all evaluation criteria in accordance with 52.212-2 in this package.5. Vendor shall complete and return provision 52.209-11 with quote.6. Vendor shall have an active registration in System for Award Management (SAM) found at https://www.sam.gov/portal/SAM/#1 in order to be eligible for contract award. In addition, vendor shall also complete Representations and Certifications electronically in SAM. PRE-BID SITE VISITThe government is planning a site visit on Thursday, April 28, 2016, 10:00 A.M. local time.Location:Greater Farallones National Marine Sanctuary991 Marine Drive, The PresidioSan Francisco, CA 94129 To request to be included in the site visit, contact Rachel Rhodes, Phone: 415-561-6622 x200, E-mail: rachel.rhodes@noaa.gov, at least 24 hours before the time of the scheduled site visit. OFFERORS OR QUOTERS ARE URGED AND EXPECTED TO INSPECT THE SITE WHERE SERVICES ARE TO BE PERFORMED AND TO SATISFY THEMSELVES REGARDING ALL GENERAL AND LOCAL CONDITIONS THAT MAY AFFECT THE COST OF CONTRACT PERFORMANCE, TO THE EXTENT THAT THE INFORMATION IS REASONABLY OBTAINABLE. IN NO EVENT SHALL FAILURE TO INSPECT THE SITE CONSTITUTE GROUNDS FOR A CLAIM AFTER CONTRACT AWARD. (IX) FAR 52.212-2, Evaluation - Commercial Items (Oct 2014), applies to this acquisition. Offers will be evaluated based on price and the factors set forth in paragraph (a). (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:1) Past Performance - Quote shall include at least two references for similar services including the phone number, full address and E-mail address (if available). Government will use its discretion to determine the sources of past performance information used in the evaluation, and the information may be obtained from references provided by the offeror, the agency's knowledge of contractor performance, other government agencies or commercial entities, or past performance databases, and will be based on responsiveness, quality, and customer services; and 2) Price. Government intends to award a best value, firm fixed-price purchase order on an all or none basis with payment terms of Net 30.(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.(End of provision)  (X) 52.212-3 Offeror Representations and Certifications-Commercial Items (Mar 2016) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) website accessed through http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (q) of this provision. (a) Definitions. As used in this provision- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program."Forced or indentured child labor" means all work or service-(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties."Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner."Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees."Inverted domestic corporation", means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). "Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except-(1) PSC 5510, Lumber and Related Basic Wood Materials;(2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials;(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture."Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan;(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or(6) Have been voluntarily suspended."Sensitive technology"-(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-(i) To restrict the free flow of unbiased information in Iran; or(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). "Service-disabled veteran-owned small business concern"-(1) Means a small business concern-(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation."Small disadvantaged business concern", consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that-(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by-(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition."Subsidiary" means an entity in which more than 50 percent of the entity is owned-(1) Directly by a parent corporation; or(2) Through another subsidiary of a parent corporation."Veteran-owned small business concern" means a small business concern-(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans."Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women."Women-owned small business concern" means a small business concern-(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and(2) Whose management and daily business operations are controlled by one or more women."Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.(b)(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________. [Offeror to identify the applicable paragraphs at (c) through (q) of this provision that the offeror has completed for the purposes of this solicitation only, if any.These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.(1) Small business concern. The offeror represents as part of its offer that it □ is, □ is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it □ is, □ is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it o is, o is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it □ is, □ is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is, □ is not a women-owned small business concern. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-(i) It □ is,□ is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: __________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-(i) It □ is, □ is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: __________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________ (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that- (i) It □ is, □ is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and(ii) It □ is, □ is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.(d) Representations required to implement provisions of Executive Order 11246-(1) Previous contracts and compliance. The offeror represents that-(i) It □ has, □ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and(ii) It □ has, □ has not filed all required compliance reports.(2) Affirmative Action Compliance. The offeror represents that- (i) It □ has developed and has on file, □ has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 cfr parts 60-1 and 60-2), or(ii) It □ has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item" "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products:Line Item No. Country of Origin______________ _______________________________ _______________________________ _________________[List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g)(1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:Line Item No. Country of Origin______________ _______________________________ _______________________________ _________________[List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products:Line Item No. Country of Origin______________ _______________________________ _______________________________ _________________[List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Canadian End Products:Line Item No._____________________________________________________________________________________________________________________[List as necessary] (3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Canadian or Israeli End Products:Line Item No. Country of Origin______________ _______________________________ _______________________________ _________________[List as necessary] (4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:Line Item No. Country of Origin______________ _______________________________ _______________________________ _________________[List as necessary] (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements."(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.Other End Products:Line Item No. Country of Origin______________ _______________________________ _______________________________ _________________[List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals- (1) □ Are, □ are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;(2) □ Have, □ have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property;(3) □ Are, □ are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and(4) □ Have, □ have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.(i) Taxes are considered delinquent if both of the following criteria apply:(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code).(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at .] (1) Listed end products. Listed End Product Listed Countries of Origin___________________ ______________________________________ ___________________(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] □ (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.□ (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) □ In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or(2) □ Outside the United States.(k) Certificates regarding exemptions from the application of the Service Contract Labor Standards (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] □ (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror □ does □ does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations;(ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. □ (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror □ does □ does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations;(ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and(iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies-(i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause.(l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). □ TIN: ________________________________.□ TIN has been applied for.□ TIN is not required because:□ Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;□ Offeror is an agency or instrumentality of a foreign government;□ Offeror is an agency or instrumentality of the Federal Government.(4) Type of organization. □ Sole proprietorship;□ Partnership;□ Corporate entity (not tax-exempt);□ Corporate entity (tax-exempt);□ Government entity (Federal, State, or local);□ Foreign government;□ International organization per 26 CFR 1.6049-4;□ Other ________________________________.(5) Common parent. □ Offeror is not owned or controlled by a common parent;□ Name and TIN of common parent:Name ________________________________.TIN _________________________________.(m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations.(1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4. (2) Representation. The Offeror represents that- (i) It □ is, □ is not an inverted domestic corporation; and(ii) It □ is, □ is not a subsidiary of an inverted domestic corporation.(o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran. (1) The offeror shall e-mail questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (2) Representation and Certifications. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror- (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran;(ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and(iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,500 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf). (3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if-(i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products.(p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a DUNS Number in the solicitation.(1) The Offeror represents that it □ has or □ does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture.(2) If the Offeror indicates "has" in paragraph (p)(1) of this provision, enter the following information:Immediate owner CAGE code: ____________________.Immediate owner legal name: _____________________.(Do not use a "doing business as" name)Is the immediate owner owned or controlled by another entity: □ Yes or □ No.(3) If the Offeror indicates "yes" in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:Highest-level owner CAGE code: __________________.Highest-level owner legal name: ___________________.(Do not use a "doing business as" name)(q) Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. (1) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, The Government will not enter into a contract with any corporation that-(i) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or(ii) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.(2) The Offeror represents that-(i) It is □ is not □ a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and(ii) It is □ is not □ a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.(End of provision) The offeror shall complete the annual representations and certifications electronically in System for Award Management at https://www.sam.gov/portal/SAM/#1. (XI) The clause at FAR 52.212-4, Contract Terms and Conditions - Commercial Items (May 2015), applies to this acquisition. (XII) The clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (Mar 2016) applies to this acquisition. (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015) (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004)(Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402). __ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509)). __ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note). __ (5) [Reserved].

A -- Automated Digital Network System (ADNS) - Automated Dynamic QoS and Visualization for Applications and Networks in Constrained Environments (ADVANCE)

Department of the Navy, Space and Naval Warfare Systems Command | Published June 11, 2015
cpvs

No Description Provided

70 -- GNAT Pro ADA for Ada Software

Department of the Navy, Space and Naval Warfare Systems Command | Published February 11, 2015  -  Deadline February 19, 2015
cpvs

Space and Naval Warfare Systems Center, Pacific (SSC Pacific) intends to award a firm fixed price purchase order on a sole source basis to AdaCore Tecnologies, INC. The requirement is for the purchase of: GNAT Pro Ada native environment to develop Ada software (including Ada 2012) for x86 Windows (32 bits). P/N: T5:Ada/X86Win (1EA) This notice of intent is not a request for quote. A determination by the government not to compete based upon responses to this notice is solely at the discretion of the government. Questions by phone or fax will not be considered. Acquisition of Commercial Items under FAR Part 12 and Simplified Acquisitions Procedures under FAR Part 13 apply. The applicable NAICS Code is 511210 and the business size standard is $35,500,000.00. The point of contact for this announcement is Margarita Cournoyer at margarita.cournoyer@navy.mil. To respond to this announcement, you must be registered to the SPAWAR E- Commerce website prior to posting quotes on-line at https://e- commerce.sscno.nmci.navy.mil. Registration to the Central Contractor Registration (CCR) and Online Representations and Certifications Application (ORCA) is required for all vendors doing business with the DoD. Information to register may be found at https://www.bpn.gov .

PAINTING OF BLDG. SURFACE EXTERIORS

Department of Homeland Security, United States Coast Guard (USCG) | Published September 2, 2016  -  Deadline September 22, 2016
cpvs

This is a combine synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information in this notice.  This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.  Proposals shall be valid for a minimum of 60 days.  The request for quote (RFQ) reference number is HSCG37-16-QPX3029 (attached).  The objective of this requirement is to seek an outstanding responsible Contractor/Vendor that can prepare then paint 16 each building exterior surfaces and other structures identified in the attached USCG Statement of Work (SOW).  All potential Contractors/Vendors must be actively registered in the System for Award Management (SAM).  This project is under the Service Contract Labor standards.  All price quotes will be evaluated base on price, technical experience, past or existing work in military environment, personnel flexibility and ease of managerial personnel in adopting to changing requirement, and finally schedule and qulaity of materials that will be utilized in contract performance.  All interested Contractors/Vendors are encouraged to attend the pre-quote/site visit scheduled at USCG Base Los Angeles-Long Beach; time and date: 0945 am 14 Sep 2016; POC:  Brandon Back (310) 521-6033 or Senior Chief Allan Kniffin (310) 521-6031.  All price quotes must be send via e-mail to:  Noel.P.Profeta@uscg.mil; deadline of quote submission: 10:00am (pacific) 22 Sep 2016. 

PAINTING OF BLDG EXTERIORS

Department of Homeland Security, United States Coast Guard (USCG) | Published July 14, 2016  -  Deadline August 18, 2016
cpvs

This is a combined synopsis/socilicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information in this notice.  This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.  Proposals shall be valid for a minimum of 60 days.  The request for quote (RFQ) reference number is HSCG37-16-Q-PSK383 (attached).  The objective of this requirement is to seek an outstanding responsible Contractor/Vendor than can prepare and paint 16 each building exteriors and other structures identified in the attached Statement of Work (SOW).  All potential Contractors/Vendors must be actively registered in the System for Award Management (SAM).  This project is under the "Service Contract Labor standards.  All price quotes will be evaluated base on technical experience and working in military active environment, personnel flexibility and ease of managerial personnel in adopting to changing requirements, schedule and quality of materials that will be utilized in the contract performance.  All interested Contractors/Vendors are encouraged to attend a pre-quote/site visit scheduled at USCG Base Los Angeles-Long Beach; time and date:  0945AM 03 August 2016.  POC:  MK1 Brandon Back (310) 521-6033 or Senior Chief Allan Kniffin (310) 521-6031.  All price quotes must be send via e-mail to: Noel.P.Profeta@uscg.mil.  Deadline of price quote submission:  10:00AM (local) 18 August 2016

Litigation Scanning and Copying

Government Printing Office, Customer Services Department | Published December 22, 2015  -  Deadline January 12, 2016
cpvs

These contract specifications encompass the (on-site) digital scanning and/or copying of sensitive Government-furnished legal case file source documents, requiring such operations as document preparation/unitization, disassembly and hand-feeding of original documents; (on-site) document scanning, black-only and four-color process copying; document ("Bates") numbering and/or endorsement (physical or digital assignment of an image key to each page); generation of ASCII text files using Optical Character Recognition (OCR) conversion; generation of Adobe Acrobat "Text + Image" PDF files; generation of IPRO LFP (including Scan-IT), Summation DII and Concordance DAT load files; re-assembly and re-construction of furnished hardcopy originals; generation of black-only and four-color process "blowback" paper copies from furnished or contractor-created digital files; storage/retention of Government documents for third-party reproduction, drilling, provision of legal index exhibit dividers, folders, three-ring binders; archiving onto CD-R and/or DVD-R discs; packing and (accelerated) delivery. NOTE: Orders will be placed within a legal environment. In order to satisfactorily accommodate the demands of the legal system, the contractor must be open for business 24 hours each day, seven days a week. The contractor must have sufficient onsite equipment and regularly-staffed employees to be able to make as many as five copies of each of as many as 40,000 legal documents of varied size, condition and assembly within a 24 hour period. All contract orders must picked-up and delivered by an employee of the contractor in a contractor-owned vehicle.

Cybersecurity Risk Management Framework Support IDIQ

Department of the Air Force, 25th Air Force | Published July 20, 2015
cpvs

This requirement was previously posted under solicitation FA7037-13-R-0001, which is now administratively closed. This new solicitation number should now be used for all future inquiries for this requirement. DESCRIPTION: Requirement is for a Firm Fixed Price IDIQ contract with a 3 year (1 year base period, and 2 option years). This acquisition is an 8(a) competitive IDIQ. The Government anticipates issuing a request for proposal by August 2015. The cybersecurity and information technology (IT) security services for this requirement support the Air Force (AF) Intelligence Community (IC) Chief Information Environment Officer (CIEO), Chief Information Security Officer (CISO) and the Authorizing Official (AO) efforts to manage risk and protect Intelligence, Surveillance, and Reconnaissance (ISR) missions and resources. External customers are across all major commands (MAJCOMS) throughout the Air Force. Support includes sustaining, integrating, protecting, and advancing AF IC communications capabilities; Cybersecurity management; protections; defenses; IT security planning and programming; policies; engineering; compliance; and assessments by providing timely, reliable support to the current and future AF IC missions. IT security services support AF IC networks, systems, applications, databases, classified as SCI and ISR (regardless of classification) and support and Air National Guard systems. Contractor shall have and maintain a final US Government issued Top Secret/ Sensitive Compartmentalized Information (TS/SCI) security clearance with a current National Agency Check (NAC).

H -- Information Operations (IO) and Meteorology and Oceanography (METOC) Engineering Services and Software Development

Department of the Navy, Space and Naval Warfare Systems Command | Published April 10, 2017  -  Deadline May 15, 2017
cpvs

The Space and Naval Warfare Systems Center, Pacific (SSC Pacific) intends to issue Request for Proposal (RFP) No. N66001-17-R-0011 for Information Operations (IO) and Meteorology and Oceanography (METOC) Engineering Services and Software Development. Multiple awards are anticipated. Space and Naval Warfare (SPAWAR) Systems Center (SSC), Pacific, has a vision of being the Nation's pre-eminent Technical Leader for integrated Command, Control, Communications, Computers and Intelligence (C4I) needs of the Navy. The Navy's C4I systems are vital to the goal of achieving and maintaining Information Warfare. A key pillar of Information Warfare is Battlespace Awareness. SSC Pacific provides solutions for many systems that contribute to Battlespace Awareness, including IO and METOC. Battlespace awareness consists of three key environments: Information, Physical and Threat. The threat environment is addressed by Intelligence Surveillance and Reconnaissance (ISR) systems that are largely supported by systems operating at security levels outside the scope of this contract. The information environment is addressed by IO systems and the physical environment by METOC. Under this construct, SSC Pacific supports and assists with the planning, integration, maintenance, and operation of systems which enable future synergy and seamless integration of IO and METOC information across the Navy's C4I systems. Requirements within this Statement of Work (SOW) are follow-on efforts to task orders listed below. The contracts, task orders, and incumbent contractors are: 1. Forward Slope, Inc. SSC Pacific Contract No. N66001-10-D-0014 task order 0007 which expired April 2014 2. General Dynamics Information Technology (GDIT) SSC Pacific Contract No. N66001-12-D-0112 task order 0001 which expires May 2016 For this requirement, a market survey to determine small business capability was posted on SPAWAR E-Commerce Central on 23 October 2015, reference number MKTSVY- 110366. Based upon evaluation of the responses to the market survey, SSC Pacific intends to compete the full scope of the requirement on an unrestricted basis (i.e., a full and open competition) with a reserve for one or more small business concerns. The full scope of the requirement is described in the attached Draft SOW. Both large and small businesses can compete for the Unrestricted multiple award contract (MAC). This effort will be formally solicited and is anticipated to result in a MAC. SSC Pacific intends on awarding multiple Cost-Plus-Fixed-Fee (CPFF), Indefinite-Delivery, Indefinite- Quantity (IDIQ) contracts. The prospective contracts are expected to have a two-year base period with one three-year option period. Task orders will be issued for individual efforts. The estimated level of effort (LOE) for the total requirement is 610,715 hours. Each FTE is estimated to be 2,080 hours per year. The North American Industry Classification System (NAICS) code for this procurement is 541330 with a size standard of $38.5 million. The estimated value of the acquisition is $80 million. A Bidders Mailing List will not be established and hard copies of documents will not be provided. The solicitation will only be available electronically on the Space and Naval Warfare Systems Command E-Commerce Web Page at https://e commerce.spawar.navy.mil under SSC Pacific - Open Solicitations. Any amendments, when issued, will also be available only on this web site. Matters posted on the web site are not terms of the solicitation unless the solicitation is written or amended to include such matters. It is estimated that the solicitation will be released in January 2017. FIRMS ARE ENCOURAGED TO REVIEW THE WEB SITE REGULARLY FOR UPDATED INFORMATION. ****************************************************** UPDATE: 4/10/2017 This revision to the Draft RFP adds Attachment 7 and the Word copy of Attachment 6. Posting N66001-16-R-0011 will no longer be updated. All information is moved to new Solicitation and Posting Number N66001-17-R-0011. All future updates and solicitation will be posted under this new FY17 number. UPDATE: 3/27/2017 (Originally under Posting N66001-16-R-0011) This revision to the pre-solicitation synopsis provides the Draft Request for Proposals (RFP) N66001-17-R-0011. This revision also provides all Draft RFP Attachments. Questions requesting clarification to the solicitation must be submitted in writing via email only, and addressed to kayla.garcia@navy.mil. The deadline for submission of questions is Monday 3 April 2017 at 1400 Pacific Time. Questions submitted after the deadline may or may not be answered by the Government. At the Government's discretion, questions and answers will be provided to all potential offerors via the SPAWAR E-Commerce website.

Z--Vent Fans and Ducting

Department of Veterans Affairs, Long Beach VANLO | Published March 4, 2016  -  Deadline March 24, 2016
cpvs

The Department of Veterans Affairs (VA) San Diego Healthcare Care System, 3350 La Jolla Village Drive, San Diego, CA 92161 has a requirement to repair, replace and modify the ducting and ventilation system in two rooms within the Hospital to create a USP 797 compliant work area. The project will include removal/replacement of the fan, hangers and associated ductwork on one hood prior to moving to the second hood. Air flow characteristics need to be established to assure certification of the room and biological safety cabinets. An existing light fixture in the ante-room will be relocated to allow for the installation of a 2X2 HEPA filter register. A pressure differential gauge is required to monitor pressure between the ante-room and the outside room. The hood operational testing in relationship with the clean room must conform to all testing relative to USP 797 standards. The majority of work will be conducted in an interstitial (asbestos containing) environment. Proper personnel protective equipment and current asbestos training certification is required to perform work. A Firm-Fixed Price award is anticipated. The contractor shall provide all necessary labor, material, tools, supervision, equipment, permits, testing and reports in accordance with all federal, state and local codes and regulations to execute all applicable services necessary to achieve USP 797 certification. Interested vendors must be listed in the VetBiz.gov Vendor Information Pages at www.vetbiz.gov, and currently registered in the System for Award Management, www.sam.gov. The magnitude of this VA construction project is estimated to be below $25,000. This solicitation will be issued pursuant to the Veterans' First Public Law 109-461 as a 100% Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside.

Big Bang UIU Software

Other Defense Agencies, U.S. Special Operations Command | Published August 31, 2016
cpvs

The Contracting Department, Naval Special Warfare Command (NSWC) intends to single award, Firm Fixed-Price contract under Part 13, Simplified Procedures for Certain Commercial Items for Universal Imaging Utility (UIU) Software. Contractor shall provide the software application for hardware independent imaging capabilities across a multitude of different devices. This acquisition will be solicited as a brand name requirement to Big Bang LLC. The Government intends to include and evaluate options in accordance with FAR 52.217-5. A complete RFQ package will be available on or about 31 August 2016 by downloading the documents at the FedBizOpps Website as follows: https://www.fbo.gov. This requirement is for Naval Special Warfare Special Operations Mission Planning Environment (SOMPE) devices. The resulting contract will be for a one year base period and 4 one year options. The North American Industry Classification System (NAICS) code for this acquisition is 339920 with a size standard of 750 employees. Potential contractors are hereby notified that the solicitation and subsequent amendments to the solicitation will ONLY be available for download at the above site; this office will no longer issue hard copy solicitations. By submitting an offer, the vendor is self-certifying that neither the requestor nor the principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the offer. By submission of an offer, the contractor acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from this solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make a contractor ineligible for award. Contractors may obtain information on registration and annual confirmation requirements by calling 866-606-8220, or via the Internet at https://www.sam.gov. Please direct all questions regarding this requirement via e-mail to the POC identified in this synopsis.

D -- Maritime Tactical Command and Control (MTC2)

Department of the Navy, Space and Naval Warfare Systems Command | Published July 20, 2016  -  Deadline November 15, 2016
cpvs

The Space and Naval Warfare Systems Command (SPAWAR), on behalf of the Program Executive Office (PEO) Command, Control, Communications, Computers and Intelligence (C4I) Command and Control Systems Program Office (PMW 150), intends to issue draft documentation ahead of the full and open competitive Request for Proposal (RFP) for the acquisition of Maritime Tactical Command & Control (MTC2) Builds 1 through 4. The required effort will include software development, design, integration, technical and engineering support, configuration management, testing, data management, program management, and logistics - all leading to the delivery of MTC2 Builds 1 through 4. MTC2 is the designated follow-on to Global Command & Control-Maritime (GCCS-M), and will extend Joint C2 (JC2) capabilities to the maritime environment and provide maritime- unique operational and tactical C2 capabilities ashore and afloat. The Government anticipates issuing an Indefinite Delivery/Indefinite Quantity (IDIQ) contract with individual Delivery Orders (DO) for each of Build with CPIF CLINS, CPFF CLINS, and Cost-only CLINS. CPIF CLINS will be for software development and integration activities; CPFF CLINS will be for engineering services related to software maintenance; Cost-only CLINS will be for Other Direct Costs (ODC) such as material, software licenses, and travel as necessary. The period of performance is expected to be a two year base with one three year option. The Government intends to incrementally release draft documents relative to this future procurement. At this time, the Government is releasing for review/feedback the draft SOW(s), applicable technical documents/GFI, and software source code. These supporting artifacts can be found at https://nesi.spawar.navy.mil/projects/mtc2r1. Please see attached instructions to gain access to NESI. This notice is provided for information only, is not a Request for Proposal, and is not to be construed as a commitment by the Government to issue a contract. The Government will not pay for any effort expended in response to this notice. All questions/comments are to be submitted in writing to the Contract Specialist, Rema Khalife, SPAWAR Headquarters, at email address rema.khalife@navy.mil and Contracting Officer, Kelly Smith, SPAWAR Headquarters, at email address kelly.m.smith@navy.mil. Interested Offerors are encouraged to monitor the SPAWAR eCommerce and FedBizOpps websites for the anticipated release of this solicitation. **Note: Projected Bid/Proposal Due Date is notional and subject to change.**

Windchill Porting

Department of the Navy, Naval Air Systems Command | Published May 20, 2016  -  Deadline June 6, 2016
cpvs

 The Naval Air Systems Command intends to award a contract for the transfer of and copy of technical data within the Integrated Digital Environment (IDE) to the Government.  This includes all technical data (and associated packages that are agreed to by the Government and vendor that are necessary to maintain the technical data contained within the IDE as currently constructed) developed under the Electro-Magnetic Aircraft Launch System (EMALS) Machining/Forging EMALS and Advanced Arresting Gear (AAG) Production, EMALS  System Design and Development (SDD), EMALS Logistics Basic Ordering Agreement (BOA) Order, EMALS Program Definition and Risk Reduction (PDRR), AAG Equipment Production Program, AAG SDD and Technology Development, and CVN 79 Long Lead Time and Material and Production, contracts.  THIS IS NOT A REQUEST FOR COMPETITIVE PROPOSALS.  This acquisition is being pursued on a sole source basis under the statutory authority of 10 U.S.C. 2304(c)(1), as implemented by Federal Acquisition Regulation 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements.  Unless stated herein, no additional information is available.  Requests for the same will be disregarded.  A determination by the Government not to compete this effort is solely within the discretion of the Government.  GENERAL INFORMATION:  There is no commitment by the Government to issue a solicitation, make an award or awards, issue an order or orders, or be responsible for any money expended by interested parties before award of a contract for the effort described above.  Information provided herein is subject to change and in no way binds the Government to solicit or award a contract.