AUTOMATIC DATA PROCESSING EQUIPMENT
Department of the Navy, Naval Sea Systems Command | Published August 4, 2016 - Deadline August 17, 2016
(10) Serial number (if concatenated unique item identifier is used).**
(12) Type designation of the item as specified in the contract schedule, if any.
(13) Whether the item is an item of Special Tooling or Special Test Equipment.
(14) Whether the item is covered by a warranty.** Once per item.
(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph(c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:
(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:
(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.
(2) Embedded items shall be reported by one of the following methods--
(i) Use of the embedded items capability in WAWF;
(ii) Direct data submission to the IUID Registry following the procedures and formats athttp://dodprocurementtoolbox.com/site/uidregistry/; or
(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.
(g) Subcontracts. If the Contractor acquires by contract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.
(End of clause)
252.225-7048 EXPORT-CONTROLLED ITEMS (JUNE 2013)
(a) Definition. ``Export-controlled items,'' as used in this clause, means items subject to the Export Administration Regulations (EAR) (15 CFR Parts 730-774) or the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130). The term includes--
(1) ``Defense items,'' defined in the Arms Export Control Act, 22 U.S.C. 2778(j)(4)(A), as defense articles, defense services, and related technical data, and further defined in the ITAR, 22 CFR Part 120; and
(2) ``Items,'' defined in the EAR as ``commodities'', ``software'', and ``technology,'' terms that are also defined in the EAR, 15 CFR 772.1.
(b) The Contractor shall comply with all applicable laws and regulations regarding export-controlled items, including, but not limited to, the requirement for contractors to register with the Department of State in accordance with the ITAR. The Contractor shall consult with the Department of State regarding any questions relating to compliance with the ITAR and shall consult with the Department of Commerce regarding any questions relating to compliance with the EAR.
(c) The Contractor's responsibility to comply with all applicable laws and regulations regarding export-controlled items exists independent of, and is not established or limited by, the information provided by this clause.
(d) Nothing in the terms of this contract adds, changes, supersedes, or waives any of the requirements of applicable Federal laws, Executive orders, and regulations, including but not limited to-
(1) The Export Administration Act of 1979, as amended (50 U.S.C. App. 2401, et seq.);
(2) The Arms Export Control Act (22 U.S.C. 2751, et seq.);
(3) The International Emergency Economic Powers Act (50 U.S.C. 1701, et seq.);
(4) The Export Administration Regulations (15 CFR Parts 730-774);
(5) The International Traffic in Arms Regulations (22 CFR Parts 120-130); and
(6) Executive Order 13222, as extended.
(e) The Contractor shall include the substance of this clause, including this paragraph (e), in all subcontracts.
(End of clause)
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)
(a) Definitions. As used in this clause--
Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.
Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.
(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall--
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/.
(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:
(1) Document type. The Contractor shall use the following document type(s).
Invoice and Receiving Report Combo (Firm-Fixed Price, FFP)
(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.
Inspection: DestinationAcceptance: Destination
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table* FFP Orders--------------------------------------------------------------------------------------------Field Name in WAWF Data to be entered in WAWF--------------------------------------------------------------------------------------------Pay Official DoDAAC To be provided at time of awardIssue By DoDAAC N00178Admin DoDAAC N00178Inspect By DoDAAC N/AShip To Code N00178Ship From Code N/AMark For Code N/AService Approver (DoDAAC) N/AService Acceptor (DoDAAC) N/AAccept at Other DoDAAC N/ALPO DoDAAC N/ADCAA Auditor DoDAAC N/AOther DoDAAC(s) N/A--------------------------------------------------------------------------------------------
(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.
(5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system.
(e-mail address to be identified at time of award)
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.
(End of clause)
5252.216-9110 ORDERS (FIXED-PRICE) (JAN 2008)
(a) General. Orders for supplies or services specified in Section B of the Schedule may be issued by the Contracting Officer at any time during the effective period of this agreement. Except as otherwise provided in paragraph (e) below, the Contractor agrees to accept and perform orders issued by the Contracting Officer within the scope of thisagreement. It is understood and agreed that the Government has no obligation under the terms of this agreement to issue any orders. Except as otherwise provided in any order, the Contractor shall furnish all materials and services necessary to accomplish the work specified in each order issued hereunder; provided, however, that this agreement shall not be used for the furnishing of supplies or services which are covered by any "guaranty" or "warranty" clause(s) of the contract(s) under which the supplies were manufactured. In the event of any inconsistency between any order and this agreement, this agreement shall control. All requirements of this agreement shall be applicable to all orders issued hereunder. Wherever the word "contract" appears in this agreement, it shall be deemed to include within its meaning the word "order", and each order shall be considered a separate binding contract as of its effective date. The Contractor shall segregate the costs incurred in the performance of any order issued hereunder from the costs of all other orders issued under this agreement.
(b) Ordering. Orders and revisions thereto shall be made in writing and be signed by any authorized Contracting Officer cited in paragraph (i). Each order shall:
(1) set forth detailed specifications or requirements for the supplies or services being ordered, (or reference applicable specifications or requirements in Section C of this agreement), and, shall refer to the appropriate item under Section B of this agreement;
(2) set forth quantities being ordered;
(3) set forth preservation, packaging and packing instructions, if any;
(4) set forth delivery or performance dates;
(5) designate the place(s) where inspection and acceptance will be made by the Government;
(6) set forth either the firm contract price or, in the case of an undefinitized order, the definitization schedule and both the monetary limitation on Government liability for the undefinitized order and the maximum ceiling amount at which the order may be definitized;
(7) set forth appropriation and accounting data for the work being ordered;
(8) set forth any discount offered for prompt payment;
(9) be dated;
(10) be identified by number in accordance with DFARS 204.7004;
(11) set forth the property, if any, to be furnished by the Government and the date(s) such property is to be delivered to the Contractor;
(12) set forth the disbursing office where payment is to be made and other applicable contract administration data;
(13) cite the applicable circumstance or exception and the justification control number. Orders for items not identified in the class justification, or an individual justification, and the basic ordering agreement are unauthorized;
(14) be issued on an SF 26 or a DD Form 1155; and
(15) set forth any other pertinent information.
(c) Firm Priced Orders. Except as otherwise provided in paragraph (d) below, the Contractor shall not begin any work on an order until a firm priced order is issued by the Contracting Officer. Upon receipt of a proposed order, the Contractor shall promptly submit to the Contracting Officer a price proposal for the work specified in the order.The Contractor agrees that it will submit such cost or pricing data as the Contracting Officer may require. Promptly after receipt of the Contractor's proposal and supporting cost or pricing data, if required, the Contractor and the Contracting Officer shall negotiate and agree upon a price and delivery schedule for the work being ordered. The price and delivery schedule, as agreed upon, shall be set forth in the priced order and the order shall be signed by both the Contracting Officer and the Contractor. Upon receipt of the priced order, the Contractor shall promptly commence work and shall diligently complete it.
(d) Undefinitized Orders. Whenever the Contracting Officer determines that urgent demands or requirements prevent the issuance of a firm priced order, the Contracting Officer may issue an unpriced order. Such order may be unilateral or bilateral and shall establish a limitation on Government liability, a maximum ceiling amount and a schedule for definitization, as described in subparagraph (f)(2) below. Upon request, the Contractor shall submit a maximum ceiling amount proposal before the undefinitized order is issued. The maximum ceiling amount is the maximum price at which the order may be definitized. Except as provided in paragraph (e) below, the Contractor shall commence performance of the order upon receipt. The clause entitled "CONTRACT DEFINITIZATION" (DFARS 252.217 7027) shall be included in any undefinitized order.
(e) Rejection of Unilateral Orders. The Contractor may reject any unilateral order if the Contractor determines it cannot feasibly perform the order, or if it does not concur with the maximum ceiling amount. However, each unilateral order shall be deemed to have been accepted by the Contractor unless within fifteen (15) days of issuance of the order the Contractor notifies the Contracting Officer in writing of its rejection of the order.
(f) Definitization of Undefinitized Orders.
(l) The Contractor agrees that following the issuance of an undefinitized order, it will promptly begin negotiating with the Contracting Officer the price and terms of a definitive order that will include: (A) all clauses required by regulation on the date of the order; (B) all clauses required by law on the date of execution of the definitive order; and, (C) other mutually agreeable clauses, terms and/or conditions. No later than sixty (60) days after the undefinitized order is issued, the Contractor shall submit a cost proposal with sufficient data to support the accuracy and derivation of its price; and, when required by FAR or the Contracting Officer, cost or pricing data. If additional cost information is available prior to the conclusion of negotiations, the Contractor shall provide that information to the Contracting Officer. The price agreed upon shall be set forth in a bilateral modification to the order. In no event shall the price exceed the maximum ceiling amount specified in the undefinitized order.
(2) Each undefinitized order shall contain a schedule for definitization which shall include a target date for definitization and dates for submission of a qualifying proposal, beginning of negotiations and, if appropriate, submission of make or buy and subcontracting plans and cost or pricing data. Submission of a qualifying proposal in accordance with the definitization schedule is a material element of the order. The schedule shall provide for definitization of the order by the earlier of:
(i) specified target date which is not more than 180 days after the issuance of the undefinitized order. However, that target date may be extended by the Contracting Officer for up to l80 days after the Contractor submits a qualifying proposal as defined in DFARS 2l7.740l; or
(ii) the date on which the amount of funds obligated by the Government under the undefinitized order exceeds fifty percent (50%) of the order's maximum ceiling amount.
(3) If agreement on a definitive order is not reached within the time provided pursuant to subparagraph (f)(2) above, the Contracting Officer may, with the approval of the Head of the Contracting Activity, determine a reasonable price in accordance with Subpart l5.4 and Part 3l of the FAR, and issue a unilateral order subject to Contractor appeal as provided in the "DISPUTES" clause (FAR 52.233 1). In any event, the Contractor shall proceed with completion of the order, subject to the "LIMITATION OF GOVERNMENT LIABILITY" clause (FAR 52.216 24).
(g) Limitation of Government Liability.
(l) Each undefinitized order shall set forth the limitation of Government liability, which shall be the maximum amount that the Government will be obligated to pay the Contractor for performance of the order until the order is definitized. The Contractor is not authorized to make expenditures or incur obligations exceeding the limitation ofGovernment liability set forth in the order. If such expenditures are made, or if such obligations are incurred, those expenditures and obligations will be at the Contractor's sole risk and expense. Further, the limitation of liability shall be the maximum Government liability if the order is terminated. The clause at FAR 52.216 24 shall be included in any undefinitized order.
(2) Except for undefinitized orders for Foreign Military Sales; purchases of less than $25,000; special access programs; and Congressionally mandated long lead procurements; and except as otherwise provided in subparagraph
(g)(3) below, the limitation of Government liability shall not exceed fifty percent (50%) of the maximum ceiling amount of an undefinitized order. In the case of orders within these excepted categories, however, the procedures set forth herein shall be followed to the maximum extent practical.
(3) If the Contractor submits a qualifying proposal, as defined in DFARS 217.7401, to definitize an order before the Government obligated fifty percent (50%) of the maximum ceiling amount, the Contracting Officer may increase the limitation of Government liability up to no more than seventy five percent (75%) of the maximum ceiling amount or up to seventy five percent (75%) of the price proposed by the Contractor, whichever is less.
(4) If at any time the Contractor believes that its expenditures under an order will exceed the limitation of Government liability, the Contractor shall so notify the Contracting Officer, in writing, and propose an appropriate increase in the limitation of Government liability of such order. Within thirty (30) days of such notice, the Contracting Officer will either (i) notify the Contractor in writing of such appropriate increase, or (ii) instruct theContractor how and to what extent the work shall be continued; provided, however, that in no event shall the Contractor be obligated to proceed with work on an undefinitized order beyond the point where its costs incurred plus a reasonable profit exceed the limitation of Government liability, and provided also that in no event shall the Government be obligated to pay the Contractor any amount in excess of the limitation of Government liability specified in any such order prior to definitization.
(h) Initial Spares. The limitations set forth in paragraph (d) and subparagraphs (f)(2), (g)(2) and (g)(3), do not apply to undefinitized orders for the purchase of initial spares.
(i) Ordering Activities. The following activities are authorized to issue orders hereunder:
Naval Surface Warfare Center Dahlgren Division (NSWCDD)
Federal Procurement Data System - Next Generation (FPDS-NG) Contract Action Reports (CARs) have replaced DD350s. The procuring and administrative contracting officers are responsible for the submission and accuracy of CARs. CARs are not required to be submitted to NAVSEA.
(End of Text)
HQ C-2-0011 COMPUTER SOFTWARE AND/OR COMPUTER DATABASE(S) DELIVERED TO AND/OR RECEIVED FROM THE GOVERNMENT (NAVSEA) (APR 2004)
(a) The Contractor agrees to test for viruses all computer software and/or computer databases, as defined in the clause entitled "RIGHTS IN NONCOMMERCIAL COMPUTER SOFTWARE AND NONCOMMERCIAL COMPUTER SOFTWARE DOCUMENTATION" (DFARS 252.227-7014), before delivery of that computer software or computer database in whatever media and on whatever system the software is delivered. The Contractor warrants that any such computer software and/or computer database will be free of viruses when delivered.
(b) The Contractor agrees to test any computer software and/or computer database(s) received from the Government for viruses prior to use under this contract.
(c) Unless otherwise agreed in writing, any license agreement governing the use of any computer software to be delivered as a result of this contract must be paid-up and perpetual, or so nearly perpetual as to allow the use of the computer software or computer data base with the equipment for which it is obtained, or any replacement equipment, for so long as such equipment is used. Otherwise the computer software or computer database does not meet the minimum functional requirements of this contract. In the event that there is any routine to disable the computer software or computer database after the software is developed for or delivered to the Government, that routine shall not disable the computer software or computer database until at least twenty-five calendar years after the delivery date of the affected computer software or computer database to the Government.
(d) No copy protection devices or systems shall be used in any computer software or computer database delivered under this contract to restrict or limit the Government from making copies. This does not prohibit license agreements from specifying the maximum amount of copies that can be made.
(e) Delivery by the Contractor to the Government of certain technical data and other data is now frequently required in digital form rather than as hard copy. Such delivery may cause confusion between data rights and computer software rights. It is agreed that, to the extent that any such data is computer software by virtue of its delivery in digital form, the Government will be licensed to use that digital-form data with exactly the same rights and limitations as if the data had been delivered as hard copy.
(f) Any limited rights legends or other allowed legends placed by a Contractor on technical data or other data delivered in digital form shall be digitally included on the same media as the digital-form data and must be associated with the corresponding digital-form technical data to which the legends apply to the extent possible. Such legends shall also be placed in human readable form on a visible surface of the media carrying the digital-form data as delivered, to the extent possible.
(End of Text)
HQ C-2-0024 EXTENSION OF COMMERCIAL WARRANTY (NAVSEA) (NOV 1996)
The Contractor shall extend to the Government the full coverage of any standard commercial warranty normally offered in a similar commercial sale, provided that such warranty is available at no additional cost to the Government. The Contractor shall provide a copy of the standard commercial warranty with the item. The standard commercial warranty period shall begin upon the final acceptance of the applicable material or software. Acceptance of the standard commercial warranty does not waive the Government's rights under the "Inspection" clause, nor does it limit the Government's rights with regard to other terms and conditions of the contract. In the event of a conflict, the terms and conditions of the contract shall take precedence over the standard commercial warranty.
(End of Text)
HQ D-1-0001 DATA PACKAGING LANGUAGE
All unclassified data shall be prepared for shipment in accordance with best commercial practice. Classified reports, data, and documentation shall be prepared for shipment in accordance with National Industrial Security Program Operating Manual (NISPOM), DOD 5220.22-M dated 28 February 2006.
(End of Text)
HQ D-2-0006 MARKING AND PACKING LIST(S) (NAVSEA) (NOV 1996)
(a) Marking. Shipments, shipping containers and palletized unit loads shall be marked in accordance with best commercial practice.
(b) Packing List(s). A packing list (DD Form 250 Material Inspection and Receiving Report may be used) identifying the contents of each shipment, shipping container or palletized unit load shall be provided by the Contractor with each shipment. When a contract line item identified under a single stock number includes an assortment of related items such as kit or set components, detached parts or accessories, installation hardware or material, the packing list(s) shall identify the assorted items. Where assortment of related items is included in the shipping container, a packing list identifying the contents shall be furnished.
(c) Master Packing List. In addition to the requirements in paragraph (b) above, a master packing list shall be prepared where more than one shipment, shipping container or palletized unit load comprise the contract line item being shipped. The master packing list shall be attached to the number one container and so identified.
(d) Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number.
(End of Text)
HQ D-2-0008 MARKING OF REPORTS (NAVSEA) (SEP 1990)
All reports delivered by the Contractor to the Government under this contract shall prominently show on the cover of the report:
(1) name and business address of the Contractor
(2) contract number
(3) contract dollar amount
(4) whether the contract was competitively or non-competitively awarded
Matthew SpruillNSWC DahlgrenDahlgren, Virginia
(End of Text)
HQ E-1-0001 INSPECTION AND ACCEPTANCE LANGUAGE FOR DATA
Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423.
(End of Text)
HQ G-2-0009 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (APR 2015)
(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the technical instruction (TI), sub line item number (SLIN), or contract line item number (CLIN) level, rather than on a total contract/TO basis, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs (ODCs), materials, and travel, by TI, SLIN, or CLIN level. For other than firm fixed price subcontractors, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer (CO) and Contracting Officer Representative (COR). Should the subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the CO and COR; or other method as agreed to by the CO.
(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and CO on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and CO email notification as required herein.
Other local relevant text applicable to this procurement:
Ddl-D13 NOTIFICATION OF SHIPMENT
When shipment is made, the contractor shall notify NSWCDD, Code [to be completed at time of award], phone [to be completed at time of award], prior to arrival of the shipment at NSWCDD, but no later than three (3) days after shipment. Notification shall include the following items:
(a) Contract and item number,(b) Date of item departure,(c) Quantity shipped,(d) Name of carrier,(e) Method of shipping,(f) Bill of lading number.
(End of Text)
Ddl-F20 RECEIVING HOURS OF OPERATION
All deliveries to the Receiving Officer, Dahlgren Division, Naval Surface Warfare Center, Dahlgren, VA shall be made Monday through Friday from 7:00 a.m. to 2:30 p.m., local time. Deliveries will not be accepted after 2:30 p.m. No deliveries will be made on government holidays.
(End of Text
Ddl-F30 PARTIAL DELIVERIES
Partial Deliveries will not be accepted without specific approval from the Contracting Officer.
(End of Text)
Ddl-F40 CONTRACTOR NOTICE REGARDING LATE DELIVERY
In the event the contractor anticipates or encounters difficulty in complying with the contract delivery schedule or date, he/she shall immediately notify, in writing, the Contracting Officer and the cognizant Contract Administration Services Office, if assigned. The notice shall give the pertinent details; however such notice shall not be construed as a waiver by the Government of any contract delivery schedule, or of any rights or remedies provided by law or under this contract.
(End of Text)
Ddl-G10 GOVERNMENT CONTRACT ADMINISTRATION POINTS-OF-CONTACT AND RESPONSIBILITIES
Procuring Contracting Officer (PCO):
(a) Name: Michelle BriscoeAddress: Code 0242Dahlgren DivisionNaval Surface Warfare Center17632 Dahlgren Road Suite 157Dahlgren, Virginia 22448-5110Phone: (540) 653-0028;E-mail: firstname.lastname@example.org
(b) PCO responsibilities are outlined in FAR 1.602-2. The PCO is the only person authorized to approve changes in any of the requirements of this contract or orders issued thereunder and, notwithstanding provisions contained elsewhere in this contract, the said authority remains solely the PCO's. The contractor shall not comply with any order, direction or request of Government personnel unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. In the event the contractor effects any change at the direction of any person other than the PCO, the change will be considered to be unauthorized.
(a) Name: Daniel BelcherAddress: Code 0242Dahlgren DivisionNaval Surface Warfare Center17632 Dahlgren Road Suite 157Dahlgren, Virginia 22448-5110Phone: (540) 653-7805;E-mail: email@example.com
(b) The Contract Specialist is the representative of the Contracting Officer for all contractual matters.
Contracting Officer's Representative (COR):
(a) Name: Matthew SpruillAddress: Code H40Dahlgren DivisionNaval Surface Warfare Center17632 Dahlgren Road Suite 157Dahlgren, Virginia 22448-5110Phone: (540) 653-5662;E-mail: firstname.lastname@example.org
(b) The COR is the PCO's appointed representative for technical matters. The COR is not a contracting officer and does not have the authority to direct the accomplishment of effort which is beyond the scope of the contract or to otherwise change any contract requirements. An informational copy of the COR appointment letter which provides a delineation of COR authority and responsibilities is provided as an attachment to this contract.
(a) Name: **To be provided at time of award
(b) The Paying Office makes all payments under the contract.
(c) For the status of payments please use MyInvoice at https://myinvoice.csd.disa.mil/index.htm. First time users must register prior to use MyInvoice.
(End of Text)
Ddl-G22 TASK/DELIVERY ORDER PROPOSAL REQUIREMENTS
(a) The contractor shall submit proposals for orders in response to written requests issued by the Contracting Officer. Proposals shall be provided within five (5) working days after receipt of the request. The request will identify the projected order type and period of performance. For term-type orders, the Government's estimate of the labor mix and level-of-effort will be provided as well as the estimate for direct travel and materials. A copy of the Statement of Work with deliverable requirements will also be provided.
(b) Proposals shall contain, as a minimum, the following information. This requirement applies equally to the level of detail required from the prime contractor and, if applicable, each proposed subcontractor. Additional information, unique to the order will be specified in the request. This may include a requirement for a brief statement of technical approach and schedule for completion type orders.
(1) Proposed direct labor to include contract and contractor labor category, proposed direct hours (separately identified as regular and UT, if applicable), proposed hourly rate (undecremented and decremented), and extended direct labor dollars for each individual. If new personnel are proposed to be added, resumes in the format provided in Section H shall be included. Vacancies shall be described in terms of projected availability date. For term orders, any variances from the Government estimate shall be addressed and justified.
(2) Other direct costs - For term orders, any variances from the Government estimate shall be identified and justified. For completion orders, a description and associated dollars for each ODC item shall be provided. In addition, provide the rationale for the amount proposed.
(3) Travel - For term orders, any variances from the Government estimate shall be identified and justified. For completion orders, identify the point of origin and destination, length of trip (including transit time), number of travelers, and number of trips. Costs shall be broken down into transportation, per diem, rental car, personal mileage, etc., with a total provided for each trip.
(4) Indirects - Provide rates and associated dollars for each proposed indirect pool (i.e, fringe, overhead, G&A, material handling, etc.,)
(5) Include planned expenditure charts showing projected labor-hour and dollar expenditures on a monthly basis.
(c) The contractor shall deliver to the Government all order proposals via electronic (Internet) transmission to the maximum extent practicable. Although not bearing original signatures, the Government will consider all such deliveries to carry the same force and effect as if submitted in hard copy and bearing original signatures of the contractor.
(d) The contractor shall provide a copy of each order's proposal directly to the COR at the same time the proposal is submitted to the Contracting Officer.
(End of Text)
Ddl-H32 CONTRACTOR'S RESPONSIBILITY FOR LOSS OR DAMAGE
The contractor assumes full responsibility for and shall indemnify the Government for any and all loss or damage of whatsoever kind and nature to any and all Government property, including equipment, supplies, accessories, or parts furnished, while in his custody and care for storage, repairs, or services to be performed under the terms of thiscontract, resulting in whole or in part from the negligent acts or omissions of the contractor, any subcontractor, or any employee, agent, or representative of the contractor or subcontractor.
(End of Text)
Ddl-H33 REPLACEMENT PARTS AVAILABILITY
The contractor guarantees that replacement parts for each machine listed in this contract shall be available for a minimum of six (6) years from the date of this contract. Subsequent to this period, if parts are not available from the contractor, he shall, if requested by the Government, furnish data to enable the Government to have such partsmanufactured elsewhere.
(End of Text)
Streamlined procedures for Commercial Items acquisition will be utilized for this purchase order award in accordance with FAR Part 12. The order shall be firm fixed price.
Proposal is due 8 August 2016, no later than 12:00 p.m. (local NSWCDD time) with an anticipated award date by 11 September 2016.
Questions and responses regarding this combined synopsis/solicitation may be submitted by Email to Daniel.email@example.com. All questions should be submitted to the Government POC listed no later than 12:00 p.m., 3 August 2016 to allow ample response time before the close of the bidding period. Email should reference Synopsis/Solicitation Number N00178-16-G-2006-0001 in the subject line.
Applicable Attachments:- Contract Data Requirements List, DD Form 1423 - Exhibit A