Public tenders for environment in Coventry United Kingdom

Find all Environment tenders in the world.
Finding business opportunities has never been easier.

Results for environment. Make a new search!

Building construction work

Coventry University Higher Education Group | Published October 24, 2017  -  Deadline November 24, 2017
cpvs
45210000

Coventry University is seeking an experienced design and build contractor to work with us to construct a second Engineering and Computing Building. The project comprises the construction of a new 4 storey, circa 5 366 m2 GIA building to accommodate the Faculty of Engineering, Environment and Computing on an existing car park. The contractor will be selected through a Single Stage Tender for a Design and Build Contract. Coventry University will require the successful Tenderer to enter into a JCT Design and Build Contract 2016 with Amendments.

Coventry University's design team will not be novated but will remain in a Client Compliance Monitoring role.

Coventry University is seeking an experienced design and build contractor to work with us to construct a second Engineering and Computing Building. The project comprises the construction of a new 4 storey, circa 5 366 m2 GIA building to accommodate the Faculty of Engineering, Environment and Computing on an existing car park. The contractor will be selected through a Single Stage Tender for a Design and Build Contract. Coventry University will require the successful Tenderer to enter into a JCT Design and Build Contract 2016 with Amendments.

Coventry University's design team will not be novated but will remain in a Client Compliance Monitoring role.

The project comprises of the following high level activities:

— Site clearance and earthworks to the existing car park;

— Piled foundations;

— Steel frame and pre-cast concrete superstructure;

— Facade and roofing;

— Bridge link to the existing ECB1;

— Internal fit out;

— Installation of loose furniture and AV equipment;

— Installation and commissioning of building services;

— External works including soft and hard landscaping;

— Minor alterations and refurbishment works to the residual car park.

Administration services

Department for Education, Education and Skills Funding Agency | Published October 20, 2017
cpvs
75100000, 80000000

** Market engagement day on 1.11.2017 in Sheffield, see II 2.4 for more information**

See Contracts Finder https://www.contractsfinder.service.gov.uk/Notice/ca560b8d-b286-4fcd-bd71-713493a5b577 for a full description.

Estimated value is 8 000 000 GBP to 10 000 000 GBP

Student Bursary Support Service (SBSS) is a service to:

— process student applications for Care to Learn financial support, which involves eligibility checks of the student (circ 4,000 applications annually)

— process institution funding claims for the 16 to18 Bursary Fund for vulnerable students (circ 4,000 claims annually)

— process student application details for Professional and Career Development Loans (circ 38,000 applications/data adjustments annually)

— carry out monthly verification of course attendance at educational institutions (circ 4,000 students annually)

— carry out monthly verification of child attendance at eligible/registered childcare providers (circ 4,000 students annually)

— carry out weekly verification of Ofsted registration of childcare providers (circ 1,000 childcare providers annually)

— make payments to eligible/registered childcare providers, educational institutions and banks for loan interest (circ 25,000 annual payments). DfE provides the funds to make these payments on a weekly basis.

— provide support for students, education institutions and childcare providers that need additional information and advice (circ 50,000 enquiries annually)

The SBSS makes circa 25,000 support payments annually to educational institutions (schools, colleges and providers) and childcare providers worth approximately £37 million per academic year.

Students, childcare providers and education institutions are the primary customers for the Student Bursary Support Service and they must receive the support and payments to which they are entitled.

The current contract to provide the Student Bursary Support Service will expire on 31.8.2019.

We will engage with the market and explore technologies and methodologies to generate interest to encourage innovative and competitive bidding.

Contract will cover the set-up of the service from May 2018 to August 2019, operation for 3 academic years from September 2019 to August 2022 (initial term). In the event that the contract is not extended beyond the initial term (see below additional academic years) provision will be included for an option to extend the contract for an additional period of four months (September 2022 to December 2022) to allow for service closure.

As mentioned above and subject to government policy and available funding there will be an option to extend the service for a 4th and 5th academic year (September 2022 to August 2023 and September 2023 to August 2024), which will move the closing period of the service to the respective September.

We will consider a variety of service delivery options including fully outsourced to a single supplier or multiple suppliers working in partnerships or as a consortium. We will also consider other options, if proposals do not meet our cost benefit expectations.

We intend to hold a market engagement day on 1 November 2017 in Sheffield. This will provide an opportunity to speak with the project team in a one to one environment following the main presentation. Details will be provided on how to book a session to interested parties.

To register your interest in attending this market engagement day please provide contact details for up to two representatives of your organisation to SBSS.Procurement@education.gov.uk. Help is available through this e-mail address.

If you have any queries after the market engagement day please contact us be by email at

SBSS.Procurement@education.gov.uk by week beginning 27.11.2017.

Frequently asked questions (FAQ) will be circulated to interested parties on a weekly basis.

Prospective providers need to take note that the intention is that Invitation to Tender for the above procurement exercise will be released to the public domain during week beginning 27.11.2017.

School cleaning services

Hereward College | Published May 3, 2017
Winner
Accuro FM Limited
cpvs
90919300

Hereward is a College for young people with disabilities and additional needs, based in Coventry. Since 1971 Hereward College have been offering inclusive provision and specialist facilities for both day and residential learners with complex disabilities and learning difficulties.

The tender project is seeking to appoint a Contractor whose initiative and innovation will be welcomed for the provision of cleaning services within the facilities for Hereward College. The high quality service levels proposed, should maintain excellent standards throughout, resulting in a pleasant environment for both the students and staff.

The basis and rationale that the Client requires the successful contractor to operate to at all times, is being able to provide a College that is fit for purpose and that the Contractor is proactive in the management of the contract, thus ensuring that all specifications are achieved and that the frequency of cleans is as detailed within the Tender Specification.

The contract being tendered is for 3 years in duration from 1.3.2017 until 29.2.2020 and will be fixed price in nature, with the Contractor invoicing the Client for 1/12th of the annual cost on a monthly basis.

It should be noted that the successful contractor will be expected to bring to the contract: innovation; new equipment; and cleaning methods, with BICSc standards being achieved as a minimum, thus ensuring that the highest levels of cleanliness are maintained in all areas at all times and also ensuring that the productivity of the cleaning operatives is enhanced moving forward into the new contract term.

At present cleaning operatives are employed to 261 hours per week, Monday to Friday, which includes a Contract Supervisor undertaking cleaning and non-cleaning duties. There is also a cleaner present in College during the day.

Building-cleaning services

Henley College Coventry | Published November 5, 2016
Winner
Cleantec Services Ltd
cpvs
90911200

The successful tenderer will be required to provide cleaning services at Henley College Coventry.

The contract being tendered is for three years in duration from 1.8.2016 until 31.7.2019, with an option for a further extension at the end of the contract term.

The tender project is seeking to appoint a Contractor whose initiative and innovation will be welcomed for the provision of cleaning services within the facilities for Henley College. The high quality service levels proposed, should maintain excellent standards throughout, resulting in a pleasant environment for both the pupils and staff.

The basis and rationale that the Client requires the successful contractor to operate to at all times, is being able to provide a College that is fit for purpose and that the Contractor is proactive in the management of the contract, thus ensuring that all specifications are achieved and that the frequency of cleans is as detailed within the Tender Specification.

The contract being tendered is for three years in duration from 1.8.2016 until 31.7.2019, with an option for a further extension at the end of the contract term and will be fixed price in nature, with the Contractor invoicing the Client for one-twelfth of the annual cost on a monthly basis.

School catering services

Holy Family Catholic Primary School | Published January 11, 2017
Winner
Alliance in Partnership Limited
cpvs
55524000

The successful tenderer will be required to provide catering services at Holy Family Catholic Primary School and Christ the King Catholic Primary School.

The tender project is seeking to appoint a Contractor whose initiative and innovation will be welcomed for the provision of services within the existing facilities for the students and teaching and support staff, with a focus on exciting new food concepts to satisfy a wide range of pupil tastes and dietary requirements. The Schools would wish the successful contractor to review the current range of services offered and make recommendations accordingly.

The contract being tendered is for 3 years in duration from August 2016 and will operate as a Guaranteed Performance Contract, with the successful Contractor offering the Schools a guaranteed cost per annum for the provision of catering services. Sovereignty of the meal tariff is to remain with the Schools for the duration of this contract.

Holy Family Catholic Primary School strive daily to create an atmosphere of welcome, compassion and acceptance to all who enter the School.

Holy Family are very much a ‘family’ School that cultivate and nurture attitudes of support, respect and care in all activities and relationships and for all children. Equally important is learning. Holy Family set high standards in everything that they do and strongly believe in the importance of the core skills of reading, writing and mathematics.

At Holy Family, all believe that primary School education is an experience that all children should enjoy to the full and they therefore offer a broad, balanced and engaging curriculum, striving to meet the needs of all children.

Pupils at Christ the King Catholic Primary School are surrounded by a vibrant, inclusive learning environment based on a Catholic ethos of compassion, love and respect. Christ the King strive to impart to all of the 419 pupils on roll, a wide range of knowledge and intellectual, artistic and sporting skills and to arouse and nurture within them, an eager spirit of enquiry and wonder.

Christ the King's teaching philosophy is centred on an environment of mutual respect, where the staff, the pupils and the whole community work together for the common aim of educating the children in their care, to achieve the highest standards of competence and ability and to be responsible and worthy citizens of the world.

Personal development training services

Coventry City Council | Published September 22, 2017  -  Deadline October 23, 2017
cpvs
80570000, 80500000

It is the intention of Coventry City Council to let a Framework for the provision of part-time programmes of Workplace Training Courses which includes IT Usage, English for Speakers of Other Languages, Manual & Computerised Accounting (Sage), Health and Social Care, First Line Management, Soft Skills and Assessment, Coaching & Monitoring.

Training Services for IT Usage.

Training Courses required for IT Usage;

Access Database software H/502/4553 Level 1

Access Database software M/502/4555 Level 2

Using email M/502/4300 Level 2

Using mobile IT devices K/502/4375 Level 2

Spreadsheet software A/502/4624 Level 1

Spreadsheet software F/502/4625 Level 2

Spreadsheet software J/502/4626 Level 3

Powerpoint software K/502/4621 Level 1

Powerpoint software M/502/4622 Level 2

Powerpoint software T/502/4623 Level 3

Word processing software L/502/4627 Level 1

Word processing software R/502/4628 Level 2

Word processing software Y/502/4629 Level 3

Website Software L/502/4630 Level 1

Website Software R/502/4631 Level 2

To tender for this lot suppliers must be able to deliver all of the above courses.

Training Services for English for Speakers of Other Languages — Units

Training Courses required;

Entry level award — the units below will be claimed against this qual and receive a unit certificate 601/3624/8 Entry 2

Workplace safety and emergency procedures Entry 2

Effective communication Entry 2

Behaviour at work Entry 2

Entry level award — the units below will be claimed against this qual and receive a unit certificate 601/3626/1 Entry 3

Work safely Entry 3

Effective speaking for the workplace Entry 3

Effective written communication Entry 3

To tender for the above lot suppliers must be able to deliver all of the above training courses.

Training Services for Manual & Computerised Accounting (Sage)

Training Courses required;

Award in Computerised Accounting for Business, course covers: 601/7288/5 Level 1

Manual (Knowledge) and Computerised (Skills) Units

Computerised Accounting Only (Sage) 601/7288/5 Level 1

Manual Accounting Only 601/7288/5 Level 1

Award in Computerised Accounting for Business, course covers: 601/4954/1 Level 2

Manual (Knowledge) and Computerised (Skills) Units

Computerised Accounting Only (Sage) 601/4954/1 Level 2

Manual Accounting Only 601/4954/1 Level 2

Computerised Payroll For Business 601/5510/3 Level 1

Suppliers must be able to deliver all of the above courses to tender for this lot.

Training Services for Health and Social Care.

Training Courses required;

Level 1 award in Health and Social Care 600/1298/5 Level 1

Level 2 diploma in Health and Social Care 501/1699/X Level 2

Introduction to Duty of Care in Health, Social Care or Children's and Young People's Settings H/601/5474 Level 2

Principles of Safeguarding and Protection in Health and Social Care A/601/8574 Level 2

Understand the Administration of Medication to Individuals with Dementia Using a Person-Centred Approach K/601/9199 Level 3

Causes and spread of infection H/501/7103 Level 2

Dementia Awareness J/601/2874 Level 2

Understand physical disability L/601/6117 Level 2

Understand the context of supporting individuals with learning disabilities K/601/5315 Level 2

Understand How to Support Individuals to be Part of a Community K/504/2195 Level 2

Suppliers must be able to deliver all of the above courses to tender for this lot.

Training Services for First Line Management -Units

Training Course required;

Introduction to Leadership A/506/2712 Level 2.

Training Services for Soft Skills — Units.

Training Courses required;

Dealing with problems & Decision making M/506/2786 Level 1

Understanding assertive behaviour T/506/2711 Level 1

Effective communication R/506/2702 Level 1

Communicating with others in the workplace R/506/2666 Level 2

Managing time in the workplace 601/3631/5 Level 2

Introduction to Health & safety in the workplace 601/3628/5 Level 1

Team working skills K/600/7795 Level 2

Business & Customer Awareness J/506/2700 Level 1

Valuing Customers A/600/7798 Level 2.

Training Services for Assessment, Coaching & Mentoring.

Training Courses required;

Introduction to the benefits of Coaching F/506/2713 Level 2

Introduction to the benefits of Mentoring H/506/2719 Level 2

Understanding the principles and practices of assessment 501/1648/4 Level 3

Assess occupational competence in the work environment 501/1676/9 Level 3

Assess vocational skills, knowledge and understanding 501/1677/0 Level 3.

Supply and installation of a 3D Immersive Virtual Reality Facility (Powerwall).

Coventry University | Published December 24, 2015  -  Deadline January 28, 2016
cpvs
32322000, 48500000, 72212520, 48520000, 72212500

Supported by the Coventry & Warwickshire Local Enterprise Partnership (LEP), Coventry University will be opening the National Transport Design Centre (NTDC) at its Technology Park in spring 2017. The centre will focus on design research, post-graduate education and industry engagement, both with Original Equipment Manufacturers (OEMs) in the transport sector (automotive, rail, marine and aerospace), suppliers in those sectors and potential new entrants. The facility will be equipped with industrial standard, state-of-the-art equipment, to ensure that NTDC can offer high quality design solutions, both physical and virtual, based on the outcomes of Coventry University's design research. One of the key facilities will be a 3D immersive VR environment, otherwise known generically as a ‘Powerwall’. This facility will provide the centre with the ability to display, interrogate and manipulate computer generated models in a virtual 3D environment.

We have a budget of between GBP 150 000 and GBP 220 000 (excluding VAT). For this budget we require the supply, installation, training and an on-going warranty: to include a 1 year warranty, plus the option to extend annually for a further 2 years. We would also like the option to extend the warranty on an annual basis, for additional years. If additional funding becomes available, we may also wish to enhance the facility further.

This contract has not been divided into lots due to the technical nature meaning we will require the same supplier who supplies the Powerwall, to also install and maintain this new facility.

Supply and installation of a 3D Immersive Virtual Reality Facility (Powerwall)

Coventry University | Published April 7, 2016
Winner
Virtalis Limited
cpvs
32322000, 48500000, 72212520, 48520000, 72212500

Supported by the Coventry and Warwickshire Local Enterprise Partnership (LEP), Coventry University will be opening the National Transport Design Centre (NTDC) at its Technology Park in spring 2017. The centre will focus on design research, post-graduate education and industry engagement, both with Original Equipment Manufacturers (OEMs) in the transport sector (automotive, rail, marine and aerospace), suppliers in those sectors and potential new entrants. The facility will be equipped with industrial standard, state-of-the-art equipment, to ensure that NTDC can offer high-quality design solutions, both physical and virtual, based on the outcomes of Coventry University's design research. 1 of the key facilities will be a 3D immersive VR environment, otherwise known generically as a ‘Powerwall’. This facility will provide the centre with the ability to display, interrogate and manipulate computer generated models in a virtual 3D environment.

We have a budget of between 150 000 GBP and 220 000 GBP (excluding VAT). For this budget we require the supply, installation, training and an on-going warranty: to include a 1 year warranty, plus the option to extend annually for a further 2 years. We would also like the option to extend the warranty on an annual basis, for additional years. If additional funding becomes available, we may also wish to enhance the facility further.

This contract has not been divided into lots due to the technical nature meaning we will require the same supplier who supplies the Powerwall, to also install and maintain this new facility.

Tribometer for material characterisation in high temperature environments and a Raman Spectrometer f

University of Warwick | Published June 9, 2015  -  Deadline July 6, 2015
cpvs
38000000, 38433000, 38000000, 38433000

The University of Warwick. Warwick Manufacturing Group, has a requirement for equipment to be used in the evaluation of surface treatments and coatings for high temperature tribological applications comprising of the following 2 lots: — Lot 1 Tribometer; — Lot 2 Raman Spectrometer. Please refer to http://in-tendhost.co.uk/universityofwarwick for further information. You will be able to download the full tender documents from this site. Any queries in relation to this requirement should be directed to the University of Warwick via the correspondence functionality of our e-tendering system. Failure to do so may result in queries being excluded from the procedure. This is an Above EU threshold tender. All correspondence regarding this tender procedure should be made through the University of Warwick In-Tend system (https://in-tendhost.co.uk/universityofwarwick) via the ‘Correspondence’ functionality. Failure to do so may result in the correspondence being excluded from the tender procedure. After expressing an interest in this project you will be able to download the full tender document set within 24 hours. All bids must be received by midday 6.7.2015.

Learning Management System Support

Coventry University Group | Published February 28, 2017  -  Deadline April 5, 2017
cpvs
48190000, 72260000, 72250000, 72210000

Coventry University Group is committed to providing a modern, reliable and scalable online learning environment to meet the rapidly growing demands of its campus, blended and online learning communities.

The University have been using Moodle as its Learning Management System (LMS) since 2008 and has one of the largest online learning environments in the country with approximately 45 000 active users (unique log ins over 3 month period). It is anticipated that this will expand significantly over the next four years to approximately 100 000 users and that a significant proportion of these will be via distance learning courses. The Group includes a range of subsidiaries who operate multiple intakes throughout the year.

Currently both the software management for Moodle and Mahara (E-Portfolio) and hosting infrastructure are outsourced. The University has recently acquired in-house provision of Azure and is in the process of setting up Amazon Web Services (AWS) and wishes to host on one of these platforms.

We are therefore seeking to replace our combined software and infrastructure services with a managed service hosted on either Azure or AWS. To facilitate this we are looking for a supplier who has experience and expertise hosting Moodle / Mahara in this way who can support the University's transition to this new hosting model and manage the service thereafter.

The chosen supplier must have experience of large Moodle implementations, preferably within the Higher Education environment and be able to show how they would quickly scale to meet rapid changes to student usage and numbers. They must also have experience of advising on Moodle architecture, installing upgrades and thorough testing.

It is expected that the contract will be for a 3 year period and renewable for two periods of one year thereafter. A description of the kind of solution the University wishes to purchase can be found in LMS Hosting Service Description document.

Tribometer for material characterisation in high temperature environments and a Raman Spectrometer f

The University of Warwick | Published October 13, 2015
Winner
RTEC-Instruments
cpvs
38000000, 38433000

The University of Warwick. Warwick Manufacturing Group, has a requirement for equipment to be used in the evaluation of surface treatments and coatings for high temperature tribological applications comprising of the following 2 lots: Lot 1 Tribometer; Lot 2 Raman Spectrometer. Please refer to http://in-tendhost.co.uk/universityofwarwick for further information. You will be able to download the full tender documents from this site. Any queries in relation to this requirement should be directed to the University of Warwick via the correspondence functionality of our e-tendering system. Failure to do so may result in queries being excluded from the procedure. This is an above EU threshold tender. All correspondence regarding this tender procedure should be made through the University of Warwick In-Tend system (https://in-tendhost.co.uk/universityofwarwick) via the ‘Correspondence’ functionality. Failure to do so may result in the correspondence being excluded from the tender procedure. After expressing an interest in this project you will be able to download the full tender document set within 24 hours. All bids must be received by 12:00, 6.7.2015.

LCKW002 Standish Hospital: Japanese Knotweed Excavation and Management Works 2016

 | Published July 22, 2016  -  Deadline August 17, 2016
cpvs
77312000

The Homes and Communities Agency (HCA) is the single, national housing and regeneration delivery agency for England. For more information visit www.gov.uk/hca The HCA ‘holds’ large expanses of land and built estate. The HCA will work with local partners to develop, invest in and dispose of the assets in pursuit of the economic development and regeneration objectives agreed by local partners and in support of local strategies. Whilst these sites help facilitate the delivery of the vision for the organisation, they also bring duties of care, health and safety, trespass and other liabilities and responsibilities. As part of the solution to manage such liabilities the HCA procure Services to undertake routine and emergency activities on its estate. The HCA’s procurement is led by its duty of care in relation to health & safety and building conservation as well as their responsibilities surrounding the economy, environment and society. The HCA is seeking to appoint a competent Supplier for the provision of Japanese Knotweed Removal Works, installation of Root Barrier and Chemical Spraying for land at Standish Hospital, Stroud. Nineteen stands of Japanese Knotweed are located on site, with two further stands located in NHS property. Works are required to excavate a number of stands of Japanese Knotweed and remove off-site as Controlled Waste to an authorised landfill. Chemical Treatment (Spraying) is to be undertaken using Glyphosate to remaining stands. It is essential that a competent and qualified person carries out the herbicide treatment. Herbicides shall only be handled and applied by persons holding a valid Certificate of Competence issued under the Control of Pesticides Regulations 1986. The Supplier will be required to provide the Contract Administrator with copies of the Certificates for each relevant person undertaking spraying activities. Where necessary, the Supplier shall engage a specialist subcontractor to comply with this requirement. A root barrier is to be installed this it to be triple coated, twin reinforced, impermeable polyethylene barrier membrane, buried to 3m. Suppliers should be members of the Property Care Association (PCA) and/or Invasive Non-Native Specialists Association. Where a Supplier is not a member of the above trade organisations they must provide evidence of accreditation to a commensurate scheme or evidence of a proven track record of experience in Japanese Knotweed Removal Works. Suppliers will be required to provide Warranties and Guarantees for these Works as detailed in the Invitation to Tender. The minimum level of Public Indemnity & Employers Liability insurance cover needed for this Contract is £10 million and £10 million respectively. Professional Indemnity Insurance of £10 million is required. The site will be available for viewing during this Tender. Suppliers will be required to visit the site prior to Pricing and will be required to confirm this within the Tender return.

Very Light Rail Vehicle (VLR) Project

 | Published December 7, 2015
Winner
Magtec
cpvs
34000000

The University of Warwick Warwick Manufacturing Group has the following project requirement. This project involves the design of two identical bogies for a railcar. Each bogie has its own self-contained series-hybrid drive system. Construction of a full railcar demonstrator is the final deliverable of the project. At this stage in the project we require a single bogie solution, i.e. a single engine, single generator, single energy storage system and two traction motors. Operation of railway vehicles over a wide network in varying environmental conditions creates a harsh operating situation and reliability of components is a priority. Therefore, we require the supplier to have a proven record of accomplishment in the design, development, and construction of generators and resulting generator-set for mobile applications that operate in harsh environments. Such environments include continuous vibration of varying intensity; high vertical acceleration loads (up to 100g); diverse weather conditions such as high winds, snow, severe temperature variation, and wet conditions; and severe restrictions on electromagnetic interference. Vehicles that encounter these operating conditions may be found in the military or aerospace sector in addition to the railway industry. This tender comprises of three lots; • Lot 1 Supply of 1 Generator/Starter and Assembly of a Diesel Engine Generator-Set • Lot 2 Supply of a Direct-Drive Traction Package Consisting of 2 Motors • Lot 3 Supply of Batteries and Battery Management System and Integration into an Energy Storage System This is an BELOW EU threshold tender All correspondence regarding this tender procedure should be made through the University of Warwick In-Tend system (https://in-tendhost.co.uk/universityofwarwick) via the “Correspondence” functionality. Failure to do so may result in the correspondence being excluded from the tender procedure. After expressing an interest in this project you will be able to download the full tender document set within 24 hours. All bids must be received by midday 14/07/15.

Very Light Rail Vehicle (VLR) Project - AWARD

 | Published December 7, 2015
Winner
Magnomatics Limited
cpvs
34000000

The University of Warwick Warwick Manufacturing Group has the following project requirement. This project involves the design of two identical bogies for a railcar. Each bogie has its own self-contained series-hybrid drive system. Construction of a full railcar demonstrator is the final deliverable of the project. At this stage in the project we require a single bogie solution, i.e. a single engine, single generator, single energy storage system and two traction motors. Operation of railway vehicles over a wide network in varying environmental conditions creates a harsh operating situation and reliability of components is a priority. Therefore, we require the supplier to have a proven record of accomplishment in the design, development, and construction of generators and resulting generator-set for mobile applications that operate in harsh environments. Such environments include continuous vibration of varying intensity; high vertical acceleration loads (up to 100g); diverse weather conditions such as high winds, snow, severe temperature variation, and wet conditions; and severe restrictions on electromagnetic interference. Vehicles that encounter these operating conditions may be found in the military or aerospace sector in addition to the railway industry. This tender comprises of three lots; • Lot 1 Supply of 1 Generator/Starter and Assembly of a Diesel Engine Generator-Set • Lot 2 Supply of a Direct-Drive Traction Package Consisting of 2 Motors • Lot 3 Supply of Batteries and Battery Management System and Integration into an Energy Storage System This is an BELOW EU threshold tender All correspondence regarding this tender procedure should be made through the University of Warwick In-Tend system (https://in-tendhost.co.uk/universityofwarwick) via the “Correspondence” functionality. Failure to do so may result in the correspondence being excluded from the tender procedure. After expressing an interest in this project you will be able to download the full tender document set within 24 hours. All bids must be received by midday 14/07/15.

Cyber Synthetic Environment

University of Warwick | Published December 14, 2016
Winner
Broadberry Data Systems Ltd
cpvs
38000000, 31000000

Warwick Manufacturing Group has a requirement to purchase a Cyber Synthetic Environment for RAS Network Connectivity as specified in the attached Invitation to Tender (ITT) documentation.

Library Services and Security Support

University of Warwick | Published October 8, 2016
Winner
Corps Security (UK) Ltd
cpvs
79995000, 79990000, 79992000, 79993000, 79710000

The University of Warwick has a requirement to purchase Library services and the provision of security support to enable the operation of the Library to continue 24 x 7. Library services includes, but is not limited to, enquiry support, shelving and other collection activities, management of the main Library facility and environment management. The contract shall be for an initial period of 2 year(s) with an option to extend for up to a further 1 year.

Note: The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Should the University advertise contracts in the Official Journal of the European Union, this is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

Cyber Synthetic Environment

The University of Warwick | Published October 20, 2016  -  Deadline November 16, 2016
cpvs
38000000

Warwick Manufacturing Group has a requirement to purchase a Cyber Synthetic Environment for RAS Network Connectivity as specified in the attached Invitation to Tender (ITT) documentation. In order to express interest in this opportunity please go to the University of Warwick In-Tend supplier portal (https://in-tendhost.co.uk/universityofwarwick). All queries must be sent via In-tend Correspondence and not directly to University staff. The University expressly reserves the rights: i) Not to award any contract as a result of this procurement process commenced by publication of this notice. ii) To make whatever changes it may see fit to the content and structure of the tendering competition. iii) To award (a) contract(s) in respect of any part(s) of the [services] covered by this notice; and iv) To award contract(s) in stages. Under no circumstances will the University be liable for any costs incurred by candidates. The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Advertisement of any contract in the Official Journal of the European Union or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

Cyber Synthetic Environment

University of Warwick | Published October 26, 2016
cpvs
38000000, 31000000

Warwick Manufacturing Group has a requirement to purchase a Cyber Synthetic Environment for RAS Network Connectivity as specified in the attached Invitation to Tender (ITT) documentation.

In order to express interest in this opportunity please go to the University of Warwick In-Tend supplier portal (https://in-tendhost.co.uk/universityofwarwick). All queries must be sent via In-tend Correspondence and not directly to University staff.

The University expressly reserves the rights:

i) Not to award any contract as a result of this procurement process commenced by publication of this notice.

ii) To make whatever changes it may see fit to the content and structure of the tendering competition.

iii) To award (a) contract(s) in respect of any part(s) of the [services] covered by this notice; and

iv) To award contract(s) in stages.

Under no circumstances will the University be liable for any costs incurred by candidates.

The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Advertisement of any contract in the Official Journal of the European Union or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

Library Services and Security Support

University of Warwick | Published July 8, 2016  -  Deadline August 2, 2016
cpvs
79995000, 79990000, 79992000, 79993000, 79710000

The University of Warwick has a requirement to purchase Library services and the provision of security support to enable the operation of the Library to continue 24 x 7. Library services includes, but is not limited to, enquiry support, shelving and other collection activities, management of the main Library facility and environment management. The contract shall be for an initial period of 2 year(s) with an option to extend for up to a further 1 year.

Interested Suppliers are invited to submit their bids based upon the information contained within the complete Invitation to Tender document set.

All interested Suppliers must provide their submissions via the University of Warwick's In-Tend procurement site www.in-tendhost.co.uk/universityofwarwick.

The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Should the University advertise contracts in the Official Journal of the European Union, this is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

Library Services and Security Support

University of Warwick | Published July 8, 2016  -  Deadline August 1, 2016
cpvs
79995000, 79990000, 79992000, 79993000, 79710000

The University of Warwick has a requirement to purchase Library services and the provision of security support to enable the operation of the Library to continue 24 x 7. Library services includes, but is not limited to, enquiry support, shelving and other collection activities, management of the main Library facility and environment management. The contract shall be for an initial period of 2 year(s) with an option to extend for up to a further 1 year.

Interested Suppliers are invited to submit their bids based upon the information contained within the complete Invitation to Tender document set.

All interested Suppliers must provide their submissions via the University of Warwick's In-Tend procurement site www.in-tendhost.co.uk/universityofwarwick.

The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Should the University advertise contracts in the Official Journal of the European Union, this is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

Categories
  United KingdomCoventry - Show all cities