Call +44 800 9755 164

Public tenders for environment in Slovakia

Find all Environment tenders in the world.
Finding business opportunities has never been easier.

Results for environment. Make a new search!
EnvironmentSlovakia

Disconnecting and securing the pillar cabinets, plastic into the environment

Úrad pre verejné obstarávanie | Published December 9, 2016  -  Deadline September 1, 2017
cpvs
31200000

NC and securing cabinets plastic into the environment (the pillar according to DIN). Cabinets designed to fuse and disconnection of cable distribution networks with voltage not exceeding 1000V.

Monitoring the impact of construction of the D1 motorway Fričovce - Svinia on the environment (water, noise, air pollutants, biota).

VODNÉ ZDROJE SLOVAKIA, s.r.o. | Published December 9, 2016  -  Deadline September 1, 2017
cpvs
71313400

Filtration technology

Filter Technik Slovakia, s.r.o. | Published February 20, 2017  -  Deadline April 28, 2017
cpvs
42514300

The contract is the supply of filtration equipment co-financed by the Operational Programme Environment Quality

Purchase filtration equipment

ECOFIL, spol. s r.o. | Published February 17, 2017  -  Deadline April 28, 2017
cpvs
42000000

The contract is the supply of technological filtration equipment co-financed by the Operational Programme Environment Quality.

Purchase parse equipment

ECOFIL, spol. s r.o. | Published February 17, 2017  -  Deadline April 28, 2017
cpvs
42000000

The contract is the supply of equipment parse co-financed by the Operational Programme Environment Quality

Assay devices

Filter Technik Slovakia, s.r.o. | Published February 20, 2017  -  Deadline April 28, 2017
cpvs
42000000

The contract is the supply of equipment parse co-financed by the Operational Programme Environment Quality

Procurement consultancy services

Bratislavský samosprávny kraj | Published February 15, 2017  -  Deadline March 5, 2017
cpvs
79418000

The contract is a comprehensive implementation of public procurement processes in the environment of the contracting authority and its parent organizations, to achieve the maximum efficiency (cost savings) and the provision of advisory services on public procurement for the duration of the framework contract for the provision of services.

Modernization and expansion modules functionalities of Central Registry of publications II (CRPA II), which are necessary to start the pilot operation

SVOP, spol. s r.o. | Published December 9, 2016  -  Deadline September 1, 2017
cpvs

Subjects directly negotiated procedure is modernization and expansion modules functionalities of Central Registry of publications II, necessary to start pilot operation. The introduction of the pilot need to deploy structures: the administration department of the user data structure state records, details search and faceted navigation, outputs and notification, copying records, the rights of users, parameter optimization, creating a production environment, the environment for training, verification environment, re-conversion data management and support for administration of classifiers and supporting entities. Substantial qualitative changes resulting from the modernization of the transition from batch data collection to an online centralized the lot database with a specific user interface and the possibility of linking and downloading data, providing support tools for quality evaluation of publication outputs, project preparation, for calculating state subsidies to public universities in Slovakia.

Brezno Land Use Plan

Architektonické štúdio Atrium s.r.o. | Published February 10, 2017  -  Deadline October 3, 2017
cpvs

The contract is the selection of a contractor for the development of spatial planning documentation Brezno Land Use Plan (the UPN - O) in accordance with the Act. 50/1976. on Territorial Planning and Building Code (Building Act), as amended, and the Decree of Ministry of the Environment. 55/2001 Coll. on land-use planning documents and land planning documentation for the full scope of administrative and administrative area, ie cadastral area of ​​the city.

Dotěsnění dykes of the Nitra River rkm 42.330 to 48.456

SLOVENSKÝ VODOHOSPODÁRSKY PODNIK, štátny podnik, odštepný závod Piešťany | Published February 16, 2017  -  Deadline March 7, 2017
cpvs
71250000

The subject of the contract undersize dotěsnění levees of the river Nitra in rkm 42,330 48,456 the provision of services: 1.Vykonanie IG research interest area buildings 2. Draw up a technical study 3.Vypracovanie EIA 4.Vypracovanie PD for construction permit and construction of projects additional object: 71351730-9 geological exploration services 71313440-1 environmental impact assessment (EIA) to the environment in connection with the works.

IT services: consulting, software development, Internet and support

Ministerstvo životného prostredia Slovenskej republiky | Published February 14, 2017  -  Deadline March 6, 2017
cpvs
72000000, 72212000, 72222300, 72230000, 72240000, 72250000, 72260000, 72262000, 72263000, 72265000, 72300000, 80531200, 48000000, 48600000, 48710000, 48730000

The contract is the design, development, implementation and delivery of information waste management system (WMIS), to ensure the computerization of services in waste management (OH).

It calls for the creation of an environment for effective electronic communications which provides:

The creation of an electronic communication interface to support a full-fledged security of electronic communications in the Olympics. Build integration platform which ensures the integration of internal departmental information systems and the development of integration interfaces for third-party information systems, which are selected national registers and common modules CPAP. The introduction of a single register and dials in the Olympics.

Creation of a centralized data base with support for versioning of documents, anonymisation selected content and full-text search. Requires the implementation of a solution type of fail-over, bezstratovosť data collection, archiving input data and recovery after an interruption every moment of implementation without impacting the availability of the surrounding systems. WMIS must be built as a scalable and will be placed in the government cloud. Details are given in the tender documents.

Geology services

Ministerstvo životného prostredia Slovenskej republiky | Published February 1, 2017
cpvs
71351910, 90722000, 71351200, 45000000

The contract is the realization of the geological project aimed at remediation of environmental burden, which present a high risk to human health and the environment. The aim of the geological task is to ensure the remediation of environmental burden Bratislava Vrakuňa - Vrakunská road dump CHZJD SK / EZ / B2 / 136th Remediation of environmental burden will be carried out by isolation of pollution and remediation of contaminated groundwater. It is a combination of passive and active clean-up work. The main objective of passive remediation action is the conclusion of the waste on-site, the main objective of active clean-up work is the removal of intense groundwater contamination in the vicinity of the landfill and necessary to remove contaminated water from the enclosed space underground sealing wall.

Dump containment of the parties will take the underground sealing wall with a length of 2,080 m with an estimated depth of about 22.0 mA thickness of the sealing walls 800 mm. Transmission factor of a containment wall must be at min. CF = 1 x 10-8 ms-1. The isolation of the surface of the landfill is carried out by means of a horizontal barrier layer fabricated by combining bentonite grout and films of high density polyethylene (HDPE) in the range of about 49 890 m2 area. Part of the redevelopment of the additional geological survey of environmental remediation and monitoring posanačný.

Miscellaneous special-purpose machinery

BSystems, s.r.o. | Published February 2, 2017  -  Deadline March 7, 2017
cpvs
42990000

The contract is the purchase of specialized technologies in the following breakdown:

- Vacuum heating plate (5 pieces);

- Brazing apparatus together with 4 miktoskopmi based camera system with the appropriate software;

- Vacuum press for bonding glass / plastic, plastic / plastic, glass / glass to 2x6 inches with 8 modular matrices with the appropriate software;

- Vacuum compact press for bonding glass / plastic, plastic / plastic, glass / glass to 6 inches along with 6 modular matrices with vacuum compressor and the appropriate software (4 pieces);

- Vacuum compact press for bonding glass / plastic, plastic / plastic, glass / glass to 6 inches along with 6 modular matrices with vacuum compressor and the appropriate software;

- Vacuum press for bonding glass / plastic, plastic / plastic, glass / glass to 15 inches along with 4 modular matrices with vacuum compressor and the appropriate software;

- Vacuum chamber (2 pcs);

- Handheld vacuum coater adhesive film together with 7 modular matrix (3 pieces);

- Freezing the separator (- 190 C);

- Freezing the separator (- 140 ° C).

The contract is the purchase of specialized technologies in the following breakdown:

1) Vacuum heating plate (5 pieces).

- Power supply 220V - 240V;

- Heating surface to 14 inches;

- Max. the calorific temperature of 100 ° C;

- Power to the vacuum compressor;

8 kg.

2) Brazing apparatus together with 4 miktoskopmi based camera system with appropriate software.

- Power 230 V;

- Power 1100 W;

- Heat soldering head up to 600 ° C;

- Warm-up Time 10 seconds;

- Power to the vacuum compressor;

- Operating pressure 2-6 kPa;

- Programmable PLC;

- Efficiency - 4 pcs / min;

110 kg.

3) vacuum press for bonding glass / plastic, plastic / plastic, glass / glass to 2x6 inches with 8 modular matrices with appropriate software.

- Power supply 230V 50Hz network;

- Power 1600 W;

- Working pressure from 0.5 to 0.9 MPa;

- Working temperature 20-40 ° C;

- Dust-free environment;

- Working conditions: up to 70% moisture;

- Programmable PLC;

- Power to the vacuum compressor;

- Efficiency - 4 pcs / min .;

290 kg.

4) Vacuum compact press for bonding glass / plastic, plastic / plastic, glass / glass to 6 inches along with 6 modular matrices with vacuum compressor and related software (4 pieces).

- Power supply 230V 50Hz network;

- Power 1200 W;

- Operating pressure 0.4 to 0.7 MPa;

- Operating temperature 20-40 ° C;

- Dust-free environment;

- Working conditions up to 70% moisture;

- Programmable PLC;

- Efficiency - 2 pcs / min;

75 kg;

- Vacuum compressor with a volume of 4 L.

5) Vacuum compact press for bonding glass / plastic, plastic / plastic, glass / glass to 6 inches along with 6 modular matrices with vacuum compressor and the software.

- Power supply 230V 50Hz network;

- Power 1000 W;

- Operating pressure 0.4 to 0.6 MPa;

- Operating temperature 20-40 ° C;

- Dust-free environment;

- Working conditions up to 70% moisture;

- Programmable PLC;

- Efficiency - 2 pcs / min;

50 kg;

- Vacuum compressor with a volume of 4 L.

6) vacuum press for bonding glass / plastic, plastic / plastic, glass / glass to 15 inches along with 4 modular matrices with vacuum compressor and the software.

- Power supply 230V 50Hz network;

- Power 1200 W;

- Working pressure 0.4-0.7 MPa;

- Working temperature 20-40 ° C;

- Dust-free environment;

- Working conditions up to 70% moisture;

- Programmable PLC;

- Efficiency - 2 pcs / min .;

80 kg.

- Vacuum compressor with a volume of 4 L.

7) Vacuum chamber (2 pieces).

- Power supply 230V 50Hz network;

- Power 1100 W;

- Working pressure 0.1-0.9 MPa;

- Operating temperature 40-60 ° C;

- Dust-free environment;

- Working conditions up to 70% moisture;

- Programmable PLC;

- Efficiency: duty cycle of 10 to 20 min / 25 pc;

75 kg.

8) manual vacuum coater adhesive film together with 7 modular matrix (3 pieces).

- Working pressure 0.4 - 0,8Mpa;

- Operating temperature 20-30 ° C;

- Dust-free environment;

- Working conditions up to 70% moisture;

- Power to the vacuum compressor;

- Efficiency: duty cycle 4 pcs / min .;

15 kg.

9) Freezing the separator (- 190 ° C).

- Power supply 400V 50Hz network;

- Power 4500 W

- The cooling range of 50 to 190 ° C;

- Programmable PLC;

- Efficiency - 4 pcs / min .;

180 kg.

10) Freezing the separator (- 140 ° C).

- Power supply 230V 50Hz network;

- Power 1700 W;

- The cooling range of 50 to 140 ° C;

- Programmable PLC;

- Efficiency - 2 pcs / min .;

100 kg.

Computer equipment and supplies

Železnice Slovenskej republiky, Bratislava v skrátenej forme „ŽSR“ | Published February 4, 2017
cpvs
30200000, 32424000, 30210000, 30211400, 30211500, 30230000, 30232700, 30233100, 30233141, 30236000, 31000000, 32413100, 32561000, 38000000, 48000000, 48219500, 48730000, 48820000, 48821000, 60000000, 71600000, 72590000, 72600000

Object of the contract is to carry out selection of a supplier of goods or services: Communication services infrastructure telematics railway station, which includes the development and modernization of existing infrastructure, as well as increased levels of security operation of information technologies ( "IT") systems and infrastructure with the needs of the contracting authority horizon 4 years:

It is a mixed contract which is the main subject of the supply of goods (hardware and software), where the successful tenderer (prospective seller) provided according to the Annex to Chapter B. Description of the object of the contract Technical Specifications (item individual components of goods and services), including the so-called. "Upgrade" - as the extension of other components for the specific type and so on. according to the operational needs of the contracting authority and at the same time (next maker of the work) to ensure handover of the works that will be carried out through the procedure of acceptance and validation.

The contract is:

delivery network components, network software management, SAN components, storage arrays, servers, software-extension of the existing environment, DWDM components, firewalls and other security elements of network infrastructure, software and related licenses, installation and configuration services related to installing and configuring components and software parts of the server, storage and network infrastructure.

Services Service support and Annex operation of the client workstation helpdesk, training and support services that result from individual solutions to specific projects and upgrading infrastructure such as. acceptance testing of equipment in service (Annex of this chapter Guarantees way perform warranty service, and contractual penalties).

Industrial machinery

Ecofil, spol. s r.o. | Published February 16, 2017  -  Deadline April 28, 2017
cpvs
42000000, 38426000, 38416000

The contract is the supply of equipment parse co-financed by the Operational Programme Environment Quality.

Technical parameters:

- Measuring range: 10 g - Water 200 mg,

- Generating electrode with diaphragm

- Built-in magnetic stirrer with digital speed control,

- View the titration curve for the determination,

- Automatic start measuring after injection of the sample,

- The minimum number of user methods - 50,

- Interface to connect external USB devices

- Complete accessories for work,

- Power supply 230 V / 50 Hz.

Technical parameters:

- Titration regimen of constant volumetric addition of reagents,

- High impedance input for measuring electrode,

- Input for thermocouple,

- The measuring range at least 1 000.0 mV,

- Resolution burette least 1:10 000,

- View the titration curve for the determination,

- Magnetic stirrer with digital speed control,

- Burette 10 ml with a chip to store information on the factors and concentrations,

- PH electrode suitable for determination of TAN in oils

- Calibration of the pH electrode min. 5 points,

- Freely programmable formulas methods

- Ability to save results and methods on USB key

- Interface to connect external USB devices

- Complete accessories for work,

- Power supply 230 V / 50 Hz.

Industrial machinery

Filter Technik Slovakia, s.r.o. | Published February 17, 2017  -  Deadline April 28, 2017
cpvs
42000000, 38416000, 03000000

The contract is the supply of equipment parse co-financed by the Operational Programme Environment Quality.

Technical parameters:

- Titration regimen of constant volumetric addition of reagents,

- High impedance input for measuring electrode,

- Input for thermocouple,

- The measuring range at least 1 000.0 mV,

- Resolution burette least 1:10 000,

- View the titration curve for the determination,

- Magnetic stirrer with digital speed control,

- Burette 10 ml with a chip to store information on the factors and concentrations,

- PH electrode suitable for determination of TAN in oils

- Calibration of the pH electrode min. 5 points,

- Freely programmable formulas methods

- Ability to save results and methods on USB key

- Interface to connect external USB devices

- Complete accessories for work,

- Power supply 230 V / 50 Hz.

features:

- Operates in accordance with ASTM D6595 - "Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry";

- Allows you to provide early warning of abnormal wear;

- Stable laboratory version;

- Analyze all the elements together;

- Measures the 22 chemical elements: smear metals: Al, Cd, Cr, Cu, Fe, Pb, Mg, Mn, Mo, Ni, Ag, Sn, Ti, W, Zn, contaminants: B, Ca, K, Si, Na , additives Ba, B, Ca, Cr, Cu, Mg, Mo, W, Si, Z.

Technical parameters:

- Output concentration mg / kg (ppm);

- Methodology of ASTM D6595; D6728;

- Spectral range of 203 mm - 810 mm;

- CCD detectors detectors;

- Without the need for calibration.

Filtering apparatus

Filter Technik Slovakia, s.r.o. | Published February 17, 2017  -  Deadline April 28, 2017
cpvs
42514300

The contract is the supply of filtration equipment co-financed by the Operational Programme Environment Quality.

EN ISO 12100: 2008, EN 349 + A1: 2008, EN ISO 13850: 2008, EN 13478 + A1: 2008, EN 14121-1: 2008, EN 60204-1: 2007th

Mobile version.

Filtration technology is designed to filter grinding and honing oil stream using a next alternative types of filtering elements.

Technical parameters:

- The number of filter units 2,

- MAGNETIC separator 1,

- Normal flow rate: 30 l / min (40 ° C-32cSt).

- Maximum tank volume: 10000 l

- Maximum oil temperature: 80 ° C

- Viscosity Oil inlet: 500 cSt

- Maximum oper. pressure: 6.8 bar.

- Power supply 380 V,

- Electric 502 / 0.75 Hz / kW.

EN ISO 12100: 2008, EN 349 + A1: 2008, EN ISO 13850: 2008, EN 13478 + A1: 2008, EN 14121-1: 2008, EN 60204-1: 2007th

Mobile version.

The filter technology is intended for the filtration of emulsions of oil in the secondary stream by using alternative types of filtering elements.

Technical parameters:

- The number of filter units 2,

- Magnetic separator: 1

- Normal flow rate: 30 l / min (40 ° C-32cSt).

- Maximum tank volume: 10000 l

- Maximum temperature: 40 ° C

20 cSt

- Maximum oper. pressure: 6 bar.

- Power supply 230 V,

- Diaphragm pump 30 l / min.

EN ISO 12100: 2008, EN 349 + A1: 2008, EN ISO 13850: 2008, EN 13478 + A1: 2008, EN 14121-1: 2008, EN 60204-1: 2007th

50 ppm.

Technical parameters:

- The number of filtration units 1,

- Normal flow: 3 to 3.5 l / min (40 ° C-32cSt)

- Maximum volume: 1,000 l

- Maximum oil temperature: 80 ° C

- Viscosity Oil inlet: 500 cSt

- Maximum oper. pressure: 6.8 bar.

- Power supply 230 V,

- Electric 0.25 Hz / kW.

EN ISO 12100: 2008, EN 349 + A1: 2008, EN ISO 13850: 2008, EN 13478 + A1: 2008, EN 14121-1: 2008, EN 60204-1: 2007th

50 ppm.

Technical parameters:

- The number of filter units 4,

12 l / min (40 ° C-32cSt)

- Maximum tank volume: 10000 l

- Maximum oil temperature: 80 ° C

- Viscosity Oil inlet: 500 cSt

- Maximum oper. pressure: 6.8 bar.

- Power supply 3 x 230 V / 400 (50 Hz)

- Electric 0.75 Hz / kW.

EN ISO 12100: 2008, EN 349 + A1: 2008, EN ISO 13850: 2008, EN 13478 + A1: 2008, EN 14121-1: 2008, EN 60204-1: 2007th

Filtration equipment is intended for pumping waste oil for its further appreciation.

Technical parameters:

- Normal flow: 30-50 l / min (40C-32cSt)

- Maximum volume: 1,000 l

- Maximum oil temperature: 80 ° C

- Viscosity Oil inlet: 500 cSt

- Maximum oper. pressure: 6.8 bar.

- Power supply 230 V,

- Electric 0.75 Hz / kW.

EN ISO 12100: 2008, EN 349 + A1: 2008, EN ISO 13850: 2008, EN 13478 + A1: 2008, EN 14121-1: 2008, EN 60204-1: 2007th

200 ppm.

Technical parameters:

- The number of filtration units 6,

- Normal flow: 16 l / min (40oC- 32cSt)

- Maximum tank volume: 10000 l

- Maximum oil temperature: 150 ° C,

- Input Oil Viscosity: 6-200 cSt,

- Maximum oper. pressure: 8 bar.

- Power supply 3 x 230 V / 400 (50 Hz)

- Electric 0.75 Hz / kW.

EN ISO 12100: 2008, EN 349 + A1: 2008, EN ISO 13850: 2008, EN 13478 + A1: 2008, EN 14121-1: 2008, EN 60204-1: 2007th

Mobile version.

10 ppm.

Number of filtration units: 4

- Normal flow rate: 12 l / min (40 ° C-32cSt).

- Maximum tank volume: 10000 l

- Maximum oil temperature: 80 ° C

- Input Oil Viscosity: 6-200 cSt,

- Maximum oper. pressure: 8 bar.

- Power supply 3 x 230 V / 400 (50 Hz)

- Electric 0.75 Hz / kW.

  • 1