Call +44 800 9755 164

Public tenders for environment in Grenoble France

Find all Environment tenders in the world.
Finding business opportunities has never been easier.

Results for environment. Make a new search!

Providing access to a professional environment for discussion, references, experience and pooled data

Gpt innovation territoriale soutenable | Published February 24, 2017  -  Deadline March 20, 2017
cpvs
79000000

Providing access to a professional environment for discussion, references, experience and pooled data

Impact on the learning environment services (EIA) for the construction

Conseil général de l'Isère | Published November 12, 2014
Winner
Soberco Environnement SARLchemin de TaffignonChaponost 69630
cpvs
71313440

Development of DR 45 and reconstruction of the bridge over Isere - assistance with project management for environmental monitoring.

Electronic, electromechanical and electrotechnical supplies

CEA Grenoble | Published March 11, 2017  -  Deadline March 13, 2017
cpvs
31700000

CEA / LITEN wants to outsource battery assembly benefits. These benefits will be realized on the CEA Grenoble site in a controlled environment.

Architectural and related services

ACTIS | Published December 27, 2014
Winner
<CONTACT_DATA_WITHOUT_RESPONSIBLE_NAME><ORGANISATION><OFFICIALNAME>rue Royale</OFFICIALNAME></ORGANISATION><ADDRESS>9 avenue Leclerc</ADDRESS><TOWN>Lyon</TOWN><POSTAL_CODE>69007</POSTAL_CODE></CONTACT_DATA_WITHOUT_RESPONSIBLE_NAME>
cpvs
71200000

Construction of about 32 social rented housing - the transaction also includes Vrd. Requested labeling: RT 2012 - Habitat label and Environment - QEB repository Bc Region. Requested Missions Base - exe - oPC complementary mission.

IT services: consulting, software development, Internet and support

CEA/Grenoble | Published March 7, 2017  -  Deadline April 4, 2017
cpvs
72000000

CEA / LETI wishes to hire an outside company provision of test and characterization of an integrated microelectronics technology circuit.

The ECA wishes to subcontract the provision of test and characterization of an integrated microelectronics technology circuit. The project in question aims to achieve a communicating RFID sensor in a high temperature environment. As part of this project, an integrated circuit was developed and declined in 2 versions.

The services required are listed below:

For version 1 of the circuit:

- High temperature Additional Tests

For version 2 of the circuit:

- Test bench optimization and its software environment

A number of options are described in the tender documents.

Electronic, electromechanical and electrotechnical supplies

CEA Grenoble | Published February 3, 2017  -  Deadline March 6, 2017
cpvs
31700000

CEA / LITEN wants to outsource battery assembly benefits. These benefits will be realized on the CEA Grenoble site in a controlled environment.

This notice advertising to aim to subcontract the battery assembly benefits. These services will be performed on the CEA Grenoble site in a controlled environment over a period of 23 months extendable to 35 months.

These services will be performed by staff holding power battery working clearances.

The precise number of batteries to be assembled will be shown later in the specification and will vary in case of contract renewal. This number should however be between 800 and 1600 battery to be assembled.

Microelectronic machinery and apparatus and microsystems

CEA/Grenoble | Published January 22, 2015  -  Deadline February 25, 2015
cpvs
31712000

The CEA wants to equip equipment for UV exposure of photosensitive resins and photosensitive organic layers. The substrates used are either 200mm diameter discs or rectangles as part of a 200mm diameter disc. The equipment will be installed in a clean room production environment like on the site of STMicroelectronics in Tours and will therefore comply with the standards in these environments.

Microelectronic machinery and apparatus and microsystems

CEA/Grenoble | Published April 15, 2015  -  Deadline May 18, 2015
cpvs
31712000

The CEA wants to equip with automatic cluster type of equipment to the deposit by "spin coating" photoresists and advanced materials for the manufacture of micro batteries. It will allow the use of substrates having a size falling within a diameter of 200 mm and being rectangular. The equipment will be in a clean and dry room environment.

Microelectronic machinery and apparatus and microsystems

CEA Grenoble | Published January 5, 2017
cpvs
31712000

CEA / Grenoble wishes to acquire equipment dedicated to the preparation of protective film against moisture comprising polymeric and metallic layers. This stack is intended to be subsequently rolled on ultra-fine components.

The equipment will be installed in a clean room production environment like the ST Microelectronics site in Tours, and will therefore comply with the standards in these environments.

Equipment dedicated to the preparation of films by lamination.

Equipment dedicated to the preparation of protective films by laser.

Microelectronic machinery and apparatus and microsystems

CEA/Grenoble | Published December 29, 2015  -  Deadline February 3, 2016
cpvs
31712000

CEA / LETI wishes to acquire equipment for laser ablation LiPON / Alumina. This equipment is intended to burn a thin layer LiPON for the manufacture of batteries. The etching is possible to limit the re-deposit and be selective for the substrate and metal layers. The system must be equipped with a UV excimer laser source deep and a table with motorized alignment x / y / z. The equipment will be installed in a clean room type of production environment on the site of STMicroelectronics in Tours and will therefore meet the standards in these environments.

Microelectronic machinery and apparatus and microsystems

CEA/Grenoble | Published June 26, 2015  -  Deadline July 24, 2015
cpvs
31712000

CEA-Leti wants to equip with automatic probing test automatic prober machine called also for silicon wafers up to 300 mm in diameter, 25 cassette unit chips or wafers. The supplier will deliver the machine equipped with a motorized stand for optical fibers for characterizing wafers for silicon photonics activities. The equipment will be installed in a clean room production environment like the STMicroelectronics site in Crolles and will therefore comply with the standards in these environments.

Provision of equipment wet etching multilayer (lithium materials, metals and oxide) by sprinkling.

CEA / Grenoble | Published November 13, 2014  -  Deadline December 18, 2014
cpvs
31712000

CEA LETI wish to purchase equipment multilayer wet etching (lithium materials, metal and oxide) by sprinkling. This equipment is designed to burn of the batches of products coated with thin layers containing materials such as metals, and oxides of lithium. It will allow to process batches of products by batch. He assured operations wet etching spray (spray), stripping, rinsing and drying. The equipment will be installed in a production environment clean room type on the STMicroelectronics Tours and will therefore conform to standards in these environments.

Provision of equipment removal resin (stripping) wet.

CEA/Grenoble | Published November 13, 2014  -  Deadline December 18, 2014
cpvs
31712000

CEA LETI wish to purchase equipment resin removal (stripping) wet. This equipment is designed to remove (stripper) of the photoresist using acetone followed by rinsing with IPA. The equipment shall be used to treat lots of products by batch. The equipment will be installed in a production environment clean room type on the site of ST Microelectronics Tours and will therefore conform to standards in these environments.

Microelectronic machinery and apparatus and microsystems

CEA/Grenoble | Published January 13, 2017  -  Deadline February 13, 2017
cpvs
31712000

CEA-LETI wishes to acquire a parametric test system connected to a machine under automatic loading tips compatible with electrical measurements on micro-electronics side of power in a clean room environment. This system of electrical tests will make measures low current (1 pA) and measures high voltages (up to 3000 V) through a high-voltage switching matrix system.

Supply of one (1) system of parametric tests High Voltage dedicated to the characterization of power devices.

Specialist optical instruments

CEA/Grenoble | Published February 18, 2015  -  Deadline March 20, 2015
cpvs
38636000

CEA LETI wish to purchase measuring equipment for silicon plates of thicknesses of 150 and 200 millimeters in diameter. This equipment should allow the achievement of spectroscopic measurements in reflectivity and ellipsometry to determine the optical properties as well as the various thin film layers (oxides and nitrides of silicon, high-k materials, SiC, ...) and stacks layers. He must be able to measure the plates with or without reasons. This equipment will be installed in a clean room Microelectronics quality and will therefore comply with the standards in this environment. Delivery date: 2nd or 3rd quarter 2015

Laser engraving equipment alumina. Required delivery date:

CEA/Grenoble | Published November 13, 2014  -  Deadline December 18, 2014
cpvs
31712000

The equipment must perform the selective etching of a thin alumina layer 100A thick without altering the underlying layers of platinum and Lico. Redeposition of material must be minimal. The machine consists of a UV laser source (preferably excimer), a beam shaping and a table with numerical control. The equipment will handle the loading / unloading of wafers with high productivity. The set will be installed in an industrial environment in white and dry room.

Inventory of fungal species in the forest environments on departmental sensitive natural area Cock Neck

Conseil general de l'isere | Published January 19, 2017  -  Deadline February 21, 2017
cpvs
90700000

Consultation No. A17DAMP-AM02 Inventory fungal species forest environments on departmental sensitive natural area Cock Neck

Cleaning services

CEA/Grenoble | Published August 1, 2015
Winner
Elior services proprete & sante
cpvs
90910000

Cleanliness in dust controlled environment. - Cleanroom cleaning operations (indicative these clean rooms are located in buildings with an area of ​​about 9,000 m² to date), respecting the constraints of the clean concept in 1 cleanliness class (ISO 3) 10000 (ISO 7): - setting white - continued cleanliness - cleanroom intervention (following chemical, etc.), - self-control and traceability associated (particle counting, etc.) - realization of conduct audits to help to maintain the clean concept - support for new people entering the cleanroom, - cleaning operations of various elements (furniture, equipment, etc.) - Exceptional cleaning operations on demand. Consumables management necessary to maintain the clean cleanroom concept - consumables distribution (masks, gloves, shoe covers, etc.), - management of trim sas, distribution and collection of required clean room. Services relating to technical premises clean rooms (excluding dust controlled environment) - cleanup techniques premises - cleaning operations external windows clean rooms - cleaning operations of various elements (curtains, water fountain, etc. .) - Rat, insect and disinfection. The market for a fixed term of three years may be extended 2 times for periods of 12 months.

Commercial ovens

CEA/Grenoble | Published December 21, 2016
cpvs
42341000

CEA / Grenoble wishes to acquire one (1) a rapid annealing furnace type RTA (Rapid Thermal Annealing) which aims heat treatment of thin film battery electrode material to improve its crystallization. The energy provided will allow to reach a temperature of 1000 ° C with ramps dismantled very fast. It will also be compatible with a clean room atmosphere.

The equipment will be installed in a clean room-type production environment on the site of STMicroelectronics in Tours, and will therefore comply with the standards in these environments.

Supply of one (1) rapid annealing furnace type "TSR" (Rapid Thermal Annealing).

Microelectronic machinery and apparatus and microsystems

CEA/Grenoble | Published December 29, 2015  -  Deadline February 3, 2016
cpvs
31712000

CEA / LETI wish to purchase equipment aimed burning a stack of thin layers LiCoO2 / Metal for battery manufacturing. The engraving should help limit the re-deposition and not to damage the substrate. The system must be equipped with Nd-YAG lasers with nanosecond and picosecond pulses. The following options will also be part of the offer: - Option 1: automatic loading / unloading - Option 2: process control, - Option 3: stand-alone licenses, - Option 4: alternative path beam - option 5: Transport DAP ST Microelectronics Tours. The equipment will be installed in a clean room type of production environment on the site of STMicroelectronics in Tours and will therefore meet the standards in these environments.