Call +44 800 9755 164

Public tenders for environment in St-johns Canada

Find all Environment tenders in the world.
Finding business opportunities has never been easier.

Results for environment. Make a new search!

Boat and Accessories

Environment Canada | Published October 5, 2015
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Boat and Accessories K8B13-160216/B Fisher (OLZ), Christine Telephone No. - (709) 772-3746 ( ) Fax No. - (709) 772-4603 Fiberglass Boat, Motor, Trailer and Accessories Environment Canada, Newfoundland Region, has a requirement for the supply and delivery of a Fibreglass Boat, Motor, Trailer and Accessories as per attached specifications at Annex B. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

ReProcessed Coastal Altimetry Data

Fisheries & Oceans Canada | Published July 30, 2015
cpvs

Trade Agreement: NONE Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: ReProcessed Coastal Altimetry Data F6093-150002/A Howell, Amanda Telephone No. - (709) 772-4997 ( ) Fax No. - The Department of Fisheries and Oceans is engaged with Environment Canada and the Department of National Defense on the research, implementation and operation of environmental prediction systems under a collaboration agreement entitled Canadian Network of Coupled Environmental PredicTion Systems (CONCEPTS). As part of this initiative DFO is contributing to the development of an oceanographic data assimilation capability for the oceans around Canada. DFO is looking for the development of a regional altimetry demonstration data product for the Canadian Shelves in eastern Canada for use in the CONCEPTS regional ocean forecast system. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Advance Procurement Notice for Edmonton, Alberta

Defence Construction Canada | Published November 9, 2015  -  Deadline December 21, 2015
cpvs

ADVANCE PROCUREMENT NOTICE BASE PROGRAM FOR FISCAL YEAR 15/16 EDMONTON, ALBERTA (WITH SECURITY REQUIREMENTS) PURPOSE OF THIS ADVANCE PROCUREMENT NOTICE This is not a bid solicitation. This is an advance notice of potential projects with anticipated security requirements to provide interested consultants and contractors an opportunity to apply for security clearances. Note that there is no guarantee that these projects will proceed. DESCRIPTION OF THE PROJECT The Base Program will consist various engineering, infrastructure and environment projects. Construction projects will be multi-trade and single trade, of varying sizes and complexity. The program may include, but is not limited to new construction, repairs, renovations and maintenance (including associated architectural, engineering and environmental services) of Department of National Defence (DND) infrastructure in support of Canadian Forces Operations in Edmonton and associated satellite sites, including Whitehose & Yellowknife. Additional technical services supporting the program may also include, but not limited to land surveying, materials testing, geological and environmental studies and environmental training. Overall program value is estimated at $10,000,000.00, with the maximum value of any individual project $5,000,000.00. DESCRIPTION OF THE SERVICES The program will consist of infrastructure and environment projects (including associated architectural, engineering and environmental services) that may include, but are not necessarily limited to the following: • Asphalt and concrete paved parking lot expansion projects • Asphalt and gravel road upgrade projects • Potable water system upgrades and repairs • Fuel Storage Tank System upgrades • Demolish various buildings and structures • Replace and / or repair roof sections on various buildings • Upgrade or replace segments of storm and sanitary sewer system • Building mechanical and electrical system upgrades • Upgrade intrusion and fire alarm systems • Replace boilers in various buildings • Upgrade high voltage distribution system • Provide temporary (three to five years) office accommodation • Various upgrades and improvements to recreational facilities including ice arenas and swimming pools • Assess & remediate contaminated sites • Complete hazardous materials assessments including hazardous materials abatement • Complete environmental assessments, including habitat and species surveys and conduct environmental training. It is anticipated that the procurement for these projects will be initiated in the period of April 1, 2015 through March 31, 2016. This is conditional on the project receiving approval to proceed by DND. SECURITY REQUIREMENTS Consultants and Contractors will be required to hold a valid DESIGNATED ORGANIZATION SCREENING (DOS) issued or approved by the Canadian Industrial Security Directorate (CISD), Public Works and Government Services Canada (PWGSC). Sub-consultants and sub-contractors will be required to hold a valid DESIGNATED ORGANIZATION SCREENING (DOS) issued or approved by the Canadian Industrial Security Directorate (CISD), Public Works and Government Services Canada (PWGSC). PROCESS Consultants and Contractors that do not meet the stipulated security requirements and that are interested in submitting proposals or bids for procurements that fall under this program can apply for the security clearance through the Industrial Security Program (ISP). This can be done by following the procedure on DCC’s website at the following link: http://www.dcc-cdc.gc.ca/english/contractors_consultants.html. The following information is to be provided: - Contract number EDM1415APN01; and - Level of clearance requested to be sponsored for. QUESTION Any questions pertaining to the sponsoring process through the ISP can be sent to the following email address: ISP.Sponsorship@dcc-cdc.gc.ca Should you wish to speak with a DCC Representative, please call (613) 998-8974 Any questions relating to the Base Construction Program can be addressed to: Skye Kaus Site Manager Defence Construction Canada Skye.Kaus@dcc-cdc.gc.ca (780) 973-4011 Ext. 2415

CFB Halifax - Tug Support Services

Department of National Defence | Published June 29, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   CFB Halifax - Tug Support Services  W010X-17H022/A Connolly, Carolyn Telephone No. - (709) 772-5396  Fax No. - (709) 772-4603  Public Works and Government Services Canada will issue a contract to secure two (2) marine tractor tug vessels in support of Cutlass Fury (CF16).  Exercise CF16 is a joint, combined and inter-agency exercise hosted by Commander Maritime Forces Atlantic (MARLANT) and executed by Commander Canadian Fleet Atlantic (CCFL), with a particular focus on joint maritime tactical warfare in a multi-threat environment.  The Contractor shall provide exclusive use of two (2) marine tractor tug vessels for standby and berthing during the period of 22  26 September 2016 in the harbour of St Johns, NL. The contractor shall be on an optional standby day of 27 September 2016.   The Contractor must perform the Work in accordance with the Statement of Work at Annex A of the Request for Proposal (RFP).  IMPORTANT NOTE TO BIDDERS:  It is the responsibility of the Bidder to ensure that all amendments issued prior to tender closing have been obtained and addressed in the submitted tender.  Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the tender and contract documents. The standard Public Works and Government Services Canada documents may be viewed at https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual/all.  Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS) at https://buyandsell.gc.ca/procurement-data/tenders. Amendments, when issued, will be available on GETS.    Firms that elect to base their bids on tender documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender authority of their intention to bid.  Bids will be received in English or French at: Public Works and Government Services Canada, Bid Receiving Unit, 10 Barter's Hill, P.O. Box 4600, St. John's, Newfoundland and Labrador A1C 5T2. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Manolis L Wreck Assessment

Fisheries and Oceans Canada | Published April 28, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Manolis L Wreck Assessment  Public Works and Government Services Canada on behalf of the Canadian Coast Guard (CCG),   St. John's, NL, requires an experienced salvage/offshore contractor to conduct an assessment on the wreck of the Manolis L which is located at Notre Dame Bay, Newfoundland in a water depth of approximately 70 meters.  The purpose of this assessment is to identify where the bunkers and oils are located and estimate the quantity thereof.  In addition, an assessment of the hull and how the wreck is resting on the seafloor is also required.  Period of contract is estimated to be date of award to September 30, 2016.   Background: On 17th January 1985, the general cargo vessel MANOLIS L was on voyage from Botwood Newfoundland and Labrador (NL), loaded with 2,990 tonnes of newsprint. She ran aground and  sank in an area known as Blow Hard Rock, Notre Dame Bay, Newfoundland in a water depth of about 70 meters.   At the time of sinking the vessel had approximately 462 tonnes of Bunker C fuel oil (HFO), 60 tonnes of diesel and 22.5 tonnes of lube oil in various tanks, according to a Transport Canada Report dated April 1985.    For 28 years the wreck lay dormant on the seabed, but in April 2013 oil (Bunker C) was reported on sea birds and on the shoreline in the Change Island area. CCG conducted an assessment and identified the wreck of MANOLIS L as the source of the oil. Subsequent surveys of the wreck identified three areas where oil was being released. Sealing devices were installed on the hull and have proven successful in controlling and containingthese releases. However, the presence of oil in the wreck poses a risk to the marine environment. As such, the CCG is initiating measures to conduct a detailed assessment of the wreck and its associated risks.  PLEASE NOTE:  BIDDERS MUST REQUEST THE ASSOCIATED ATTACHMENTS UPON ORDERING THE SOLICITATION DOCUMENT TO ALLOW TIME FOR REVIEW.  REQUESTS FOR EXTENSIONS BASED ON DELAY REQUESTING ATTACHMENTS WILL NOT BE CONSIDERED.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Pigsty Walls and Ceiling Finishes Improvements – G building, Sherbrooke

Agriculture and Agri-Food Canada | Published June 20, 2016  -  Deadline December 7, 2016
cpvs

INVITATION TO TENDER/ 01B46-16-057

Pigsty Walls and Ceiling Finishes Improvements – G building, Sherbrooke

Sealed tenders for the project indicated above, addressed to the attention of the Contract Officer, Agriculture and Agri-Food Canada, will be accepted at the following address, up to the tender closing date and time indicated below:

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

TENDER RECEIVING UNIT
2001 Robert-Bourassa, suite 671-TEN
Montreal, QC, H3A 3N2
Scope of Work:

The works consist in general in covering the walls and painting the ceiling and doors of Sherbrooke RDC Pigsty #7 Section G rooms (18 rooms). The type of wall covering will be HDPE plastic laminated on plywood. Multiple services located on the walls and the ceilings will have to be removed or detached and afterwards reinstalled or reattached. For example: water pipes, electrical conduits, junction boxes, electrical outlets, fire alarm devices, ventilation opening release mechanisms, hooks, shutters, etc.

Site Visit:

A site visit will be held on Monday, July 4th, 2016 at 10:00 AM (EDT) at 2000 College Street, Sherbrooke, QC J1M 0C8. Offerors who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation and will be posted on buyandsell.gc.ca.

PLEASE NOTE:

The pigsty is a biosecure environment. All visitors will have to follow the protection measures established by the Sherbrooke RDC. The tenderers will have the obligation to take a shower at the pigsty and wear the protective clothing provided on-site (overall, socks, cap and boots) during the visit. The persons that have been in contact with hogs or have visited a pigsty in the last 48 hours prior to the site visit won’t be allowed in the pigsty.

Tender Period Closing Date and Time: Tuesday July 12th, 2016 at 02:00 pm (Eastern Daylight Time).

AAFC will not necessarily accept the lowest or any tender.

Information requests and inquiries related to this tender process are to be directed, in writing, ONLY to the AAFC Contract Officer identified below. Bidders who contact anyone other than the AAFC Contract Officer to obtain such information during the solicitation period may, for that reason alone, be disqualified.

It is MANDATORY for the firms intending to submit tenders on this project to obtain the related specifications, plans and drawings, and all other tender documents through the buyandsell.gc.ca service provider. Addenda, when issued, will be available from the buyandsell.gc.ca service provider.

AAFC Contract Officer:

Carol Rahal

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

2001, Robert-Bourassa, suite 671-TEN
Montreal, QC, H3A 3N2
Email: carol.rahal@agr.gc.ca

Public Advertisement for an Expression of Interest (EOI)

Public Works and Government Services Canada | Published December 7, 2015
cpvs

INVITATION TO SUBMIT AN EXPRESSION OF INTEREST (EOI) AS TO THE AVAILABILITY OF SPACE FOR LEASE IN THE TOWN OF SPRINGDALE FILE NUMBER 523259 Public Works and Government Services Canada (PWGSC) is asking interested parties to provide information for a potential lease of space that meets the following criteria: Section A: Lease Components a lease term of approximately 10 years, commencing on or about March 1, 2017, with the Lessee having the right of early termination after eight (8) years;approximately 263 usable square metres (um2) of contiguous office space and 9 parking spaces;the proposed space must be available approximately twelve (12) weeks prior to the above-noted lease commencement date so all space(s) may be prepared for occupancy;the proposed space should satisfy or be capable of satisfying the following criteria:the proposed space should be contiguous and without obstruction;the proposed space have a minimum clear ceiling height of 2.591 metres and a maximum clear ceiling height of 3.05 metres;the length of the proposed space should not be more than three (3) times its width; no dimensions of the premises should be less than 7.5 metres;there should be a minimum of 6 metres spacing of all support columns in all directions in the proposed space;The physical characteristics of the land and the building and the area and environment surrounding it, including neighboring land uses, should be compatible with the Lessee’s intended use of the accommodation; industrial type buildings and those with industrial space will not be considered;The space should be located on the ground floor of the building in an area of high visibility;the proposed space must be located in the Town of Springdale;on or before the lease commencement date, the proposed space will have to comply with all requirements contained in PWGSC’s Standards for Leased Accommodation, a copy of which may be obtained from the contact listed in Section F; Note: PWGSC may wish to visit or inspect the proposed space upon reasonable notice and a threat and risk assessment may be undertaken in order to assess potential threats to the security of the proposed space and to the public. Section B: Responses Interested parties are requested to submit their response to this EOI in writing to the following address: Public Works and Government Services Canada Bid Receiving Unit Real Property Contracting John Cabot Building 10 Barter’s Hill St. John’s, NL A1C 5T2 or by facsimile to 709-772-4603 or by email to the contact listed below in Section F. Please indicate File No.523259 on all correspondence. Section C: Responses Requested by As this may be the only invitation to submit an Expression of Interest for this potential lease project, owners or their agents should provide their response by December 30, 2015. Any response received after this date may not be considered. Section D: Information Provided by Interested Parties or Agents of Interested Parties Information provided by interested parties or agents of interested parties should include the file number, the location and municipal address of the building, current zoning, specific location of space within the building, measured area of space, a floor plan identifying the proposed space with washrooms, exits and other design elements, private/public parking facilities, and details addressing the criteria listed above in Section A. Agents submitting a response to this EOI must provide PWGSC with a letter authorizing them to do so. Section E: Security Requirement If this EOI results in a future tender process, the building owners of the proposed spaces will have to hold a valid security clearance at the Reliability level, approved and granted by the Canadian Industrial Security Directorate (CISD) of PWGSC prior to award. All parties interested in this potential lease project are advised to obtain this security clearance level in advance. Information regarding security clearance can be obtained on the website of the CISD/PWGSC at http://ssi-iss.tpsgc-pwgsc.gc.ca. Please contact the person listed in Section F to initiate the security clearance process. Section F: Additional Information For more information, please contact Paula Pretty, Leasing Officer by phone at (709-685-3908) or by email to: paula.pretty@pwgsc-tpsgc.gc.ca. Section G: List of Available Space This EOI is issued in order to invite interested parties to demonstrate their interest in providing the requirements described herein. This information may be included in a list of available space and used for potential future solicitations. Section H: Not a Solicitation Process Note that this is not a tender process, nor a request for proposal, but only an inquiry as to the availability of space to lease. PWGSC will not necessarily invite offers, or lease any space, and may not post any future ads related to this request. The information provided through this EOI may be included in a source list of available space and PWGSC may issue an invitation to tender for other leasing requirements based on this information, or based on any other information which may come to its attention prior to an issuance of an invitation to tender; or it may invite offers by way of public tender. PWGSC reserves the right to proceed with an Invitation to Offer to Lease by inviting only parties deemed to most effectively meet specific operational, security and public safety requirements.

Unmanned Air Vehicles (UAVs)

Royal Canadian Mounted Police | Published December 16, 2015
cpvs

Trade Agreement: NONE Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address: Aeryon Labs Inc. 575 Kumpf Drive Waterloo Ontario Canada N2V1K3 Nature of Requirements: M4500-163313/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 Unmanned Aircraft System Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agencyintends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. Public Works and Government Services Canada (PWGSC), on behalf of its client, the Royal Canadian Mounted Police (RCMP), J Division has a requirement for the supply and delivery of one (1) Unmanned Aircraft System (UAV) with the option to purchase three (3) additional UAVs. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements 1 The system must be able to take off and land vertically. 2 The system must have the ability to land and take off automatically. 3 The entire system, including ground control station, battery, payload and air vehicle, must be man packable and carried by a single operator. 4 The System must be able to be folded or disassembled for compact transport and storage. 5 System must be supplied with a hard case for packing chargers/batteries, and spare parts as well as a padded soft backpack for the UAV and associated controller items for field deployment. The backpack shall be of such dimensions that the entire system can easily be carried by one person. 6 The air vehicle system, including control of air vehicle and control of camera, must be able to be operated by a single operator. 7 Notwithstanding current Transport Canada regulations, the system must be capable of beingsafely flown beyond line of site at low altitude (<500ft) 3 8 9 10 11 12 13 14 15 16 17 7500 using a ground control application with automated precision control. system must be supplied 1multi-charger (120vac min pockets) and sufficient batteries to allow for continuous operation. able operate in altitudes up feet above sea level. entire including controller weatherproof rain, snow, dust salt air conditions. parts such as arms, legs payloadsmust interchangeable the field without tools. flight logs automatically recorded. include date, time location of flight, complete path any faults encountered during flight. customer retrievable. provide diagnostic self-check signal on start-up. real battery status, telemetry, link gps status fault information sent pilot's information. unit have standard navigational lighting that can turned or off required. vehicle not cause radio interference rcmp systems accept from same. demonstrated ability fly volatile environments (Chemical/Gas/High voltage power lines). 18 System must have built in fault tolerance 19 The system must have a flight time of no less than fifty (SO) minutes on a single battery with payload. 20 The system must have a flight range of at least 1km LOS with handheld controller. 21 The system must use Google Maps or Microsoft Bing Maps for navigational control tools. 22 All system components must have a minimum operating temperature range of -25c to +40c. 23 System must be able to operate with useable video stabilized flight in sustained winds of 65km/h with gusts to 90km/h. This requirement must be demonstrated if required by the contracting authority 24 Minimum requirement for turnaround time (battery change time) is no more than three minutes. 25 Minimum requirement for setup and launch time of system is no more than five minutes. 26 GPS accuracy minimum requirement is+/- 2 metres The procurement is subject to the following trade agreement: - World Trade Organization Agreement on Government Procurement (WTO-AGP) - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) The Aeryon SkyRanger is the only UAV on the market that meets or exceed the mandatory requirements. Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products thatmust be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. The product must be delivered on or before February 28, 2016. The estimated value of the contract is $667,423.00 HST extra Suppliers' right to submit a statement of capabilities Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how thesupplier meets the advertised requirements. Closing date and time for accepting statements of capabilities Submissions must be received on or by 2:00 p.m. December 31, 2015. Inquiries and statement of capabilities are to be directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Environmental Professional Consulting Services - Real Property Related

Public Works and Government Services Canada | Published June 30, 2016
Winner
EnGlobe Corp.
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Comprehensive Land Claim Agreement: No Notification Method: Public Advertising Contract Award Procedure (Procurement Strategy): Best Overall  Proposal GSIN Description:  Environmental Professional Consulting Services - Real Property Related Quantity: 1

RISOs for Environmental Services Various Locations Newfoundland

Public Works and Government Services Canada | Published June 30, 2016
Winner
Amec Foster Wheeler Americas Limited
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Comprehensive Land Claim Agreement: No Notification Method: Public Advertising Contract Award Procedure (Procurement Strategy): Best Overall  Proposal GSIN Description:  Environmental Professional Consulting Services - Real Property Related Quantity: 1

RISO for Environmental Services Various Locations Nova Scotia

Public Works and Government Services Canada | Published March 22, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Regional Individual Standing Offer (RISOs) for Environmental Services Various Locations Nova Scotia   Public Works and Government Services Canada (PWGSC) has a requirement to establish Regional Individual Standing Offers (RISOs) for a range of Environmental Services for federally owned properties in Nova Scotia, as per the attached Required Services (Statement of Work).     These Environmental Services may include phased environmental site assessments, site remediation, risk assessments, compliance related work, sustainability services and environmental management systems support, and environmental impact assessments, related permitting and scientific studies (e.g. biology, oceanography, archeology).    PWGSC is intending to issue Four (4) RISOs in response to this Request for Standing Offer (RFSO). This requirement will be evaluated in accordance with pre-set mandatory, technical and price criteria. Offers will be rated with regard to the: Proposed Team Approach and Management of Services, Past Experience of the Offeror, Senior Technical Specialist Expertise and Experience, Project Personnel Expertise and experience, as well as the proposed price of services.  The four (4) highest ranked offers will be recommended for issuance of a RISO based on ideal business distribution percentages, which have been pre-established as follows: 30% of business volume to the top ranked consultant, 27% to the second, 24% to the third and 19% to the fourth. Should we receive less than four (4) responsive offers, the values of the business distributed will be adjusted accordingly.  The period for placing call-ups and rendering services against these RISOs will be two (2) years from the date of issuance, on  an as and when requested basis.  The total estimated value is estimated to be $6,900,000.00 (HSTI).  Individual call-up amounts will vary, up to a maximum of $250,000.00 (HSTI).  A standing offer is an agreement and not a contract.  Canada does not guarantee that the full amount, or that any amount, will be called-up on any resultant standing offer.    IMPORTANT NOTICE TO SUPPLIERS:  With the introduction of the new Government of Canada Web Site, Buyandsell.gc.ca/tenders, there are significant changes to Public Works and Government ServicesCanada (PWGSC) solicitations.  Buyandsell.gc.ca/tenders is the official and first site suppliers should rely on to find Government of Canada tenders to ensure that they always get the most up-to-date and accurate information about new tender notices or amendments. Buyandsell.gc.ca cannot confirm or endorse the completeness of information that suppliers might find on third-party web sites or received through a notification service. Firms that elect to base their bids on solicitation documents obtainedfrom other sources do so at their own risk and will be solely responsible to inform the contracting authority of their intention to bid.  In keeping with Canadas commitment to green procurement, only electronic distribution of tenders and associated documents and/or construction drawings is available. Bidders can download and print the documents or bring them or send them by email to a print shop or other professional printing services for printing.  Addenda, when issued, will be available on the web site Buyandsell.gc.ca/tenders.  It is the responsibility of the Bidder to ensure that all addenda issued prior to solicitation closing have been obtained and addressed in the submitted offer.  Sealed offers will be received in English, or French at:  Public Works and Government Services Canada, Bid Receiving Unit, 10 Barter's Hill, P.O. Box 4600, St. John's, Newfoundland and Labrador  A1C 5T2.  Bid Security is not a requirement for this tender.  GSIN: E199H   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

RISO Environmental Services Various Locations NB and PEI

Public Works and Government Services Canada | Published March 17, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Regional Individual Standing Offer (RISOs) for Environmental Services Various Locations NB and PEI   Public Works and Government Services Canada (PWGSC) has a requirement to establish Regional Individual Standing Offers (RISOs) for a range of Environmental Services for federally owned properties in New Brunswick and Prince Edward Island, as per the attached Required Services (Statement of Work).     These Environmental Services may include phased environmental site assessments, site remediation,risk assessments, compliance related work, sustainability services and environmental management systems support, and environmental impact assessments, related permitting and scientific studies (e.g. biology, oceanography, archeology).    PWGSC is intending to issue Four (4) RISOs in response to this Request for Standing Offer (RFSO). This requirement will be evaluated in accordance with pre-set mandatory, technical and price criteria. Offers will be rated with regard to the: Proposed Team Approach and Management of Services, Past Experience of the Offeror, Senior Technical Specialist Expertise and Experience, Project Personnel Expertise and experience, as well as the proposed price of services.  The four (4) highest ranked offers will be recommended for issuance of a RISO based on ideal business distribution percentages, which have been pre-established as follows: 30% of business volume to the top ranked consultant, 27% to the second, 24% to the third and 19% to the fourth. Should we receive lessthan four (4) responsive offers, the values of the business distributed will be adjusted accordingly.  The period for placing call-ups and rendering services against these RISOs will be two (2) years from the date of issuance, on  an as and when requested basis.  The total estimated value is estimated to be $6,840,000.00 (HSTI).  Individual call-up amounts will vary, up to a maximum of $250,000.00 (HSTI).  A standing offer is an agreement and not a contract.  Canada does not guarantee that the full amount, or that any amount, will be called-up on any resultant standing offer.    IMPORTANT NOTICE TO SUPPLIERS:  With the introduction of the new Government of Canada Web Site, Buyandsell.gc.ca/tenders, there are significant changes to Public Works and Government Services Canada (PWGSC) solicitations.  Buyandsell.gc.ca/tenders is the official and first site suppliers should rely on to find Government of Canada tenders to ensure that they always get the most up-to-date and accurate information about new tender notices or amendments. Buyandsell.gc.ca cannot confirm or endorse the completeness of information that suppliers might find on third-party web sites or received through a notification service. Firms that elect to base their bids on solicitation documents obtained from other sources do so at their own risk and will be solely responsible to inform the contracting authority of their intention to bid.  In keeping with Canadas commitment to green procurement, only electronic distribution of tenders and associated documents and/or construction drawings is available. Bidders can download and print the documents or bring them or send them by email to a print shop or other professional printing services for printing.  Addenda, when issued,will be available on the web site Buyandsell.gc.ca/tenders.  It is the responsibility of the Bidder to ensure that all addenda issued prior to solicitation closing have been obtained and addressed in the submitted offer.  Sealed offers will be received in English, or French at:  Public Works and Government Services Canada, Bid Receiving Unit, 10 Barter's Hill, P.O. Box 4600, St. John's, Newfoundland and Labrador A1C 5T2.  Bid Security is not a requirement for this tender.  GSIN: E199H  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

RISOs for Environmental Services Various Locations Newfoundland

Public Works and Government Services Canada | Published March 23, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Regional Individual Standing Offer (RISOs) for Environmental Services Various Locations Newfoundland and Labrador  Public Works and Government Services Canada (PWGSC) has a requirement to establish Regional Individual Standing Offers (RISOs) for a range of environmental services for federally owned properties in Newfoundland and Labrador, as per the attached Required Services (Statement of Work).     These environmental services may include phased environmental site assessments, site remediation,risk assessments, compliance related work, sustainability services and environmental management systems support, and environmental impact assessments, related permitting and scientific studies (e.g. biology, oceanography, archeology).    PWGSC is intending to issue Five (5) RISOs in response to this Request for Standing Offer (RFSO). This requirement will be evaluated in accordance with pre-set mandatory, technical and price criteria. Offers will be rated with regard to the: Proposed Team Approach and Management of Services, Past Experience of the Offeror, Senior Technical Specialist Expertise and Experience, Project Personnel Expertise and experience, as well as the proposed price of services.   The five (5) highest ranked offers will be recommended for issuance of a RISO based on ideal business distribution percentages which have been pre-established as follows: 27% of business volume to the top ranked consultant, 23% to the second, 20% to the third, 17% to the fourth and 13% to the fifth. Should we receive less than five (5) responsive offers, the values of the business distributed will be adjusted accordingly.  The period for placing call-ups and rendering services against these RISOs will be two (2) years from the date of issuance, on  an ``as and when requested basis. The total estimated value is estimated to be $9,040,000.00 (HSTI).  Individual call-up amounts will vary, up to a maximum of $250,000.00 (HSTI).  A standing offer is an agreement and not a contract.  Canada does not guarantee that the full amount, or that any amount, will be called-up on any resultant standing offer.    IMPORTANT NOTICE TO SUPPLIERS:  With the introduction of the new Government of Canada Web Site, Buyandsell.gc.ca/tenders, there are significant changes to Public Works and Government Services Canada (PWGSC) solicitations.  Buyandsell.gc.ca/tenders is the official and first site suppliers should rely on to find Government of Canada tenders to ensure that they always get the most up-to-date and accurate information about new tender notices or amendments. Buyandsell.gc.ca cannot confirm or endorse the completeness of information that suppliers might find on third-party web sites or received through a notification service. Firms that elect to base their bids on solicitation documents obtained from other sources do so at their own risk and will be solely responsible to inform the contracting authority of their intention to bid.  In keeping with Canadas commitment to green procurement, only electronic distribution of tenders and associated documents and/or construction drawings is available. Bidders can download and print the documents or bring them or send them by email to a print shop or other professional printing services for printing.  Addenda, when issued, will be available on the web site Buyandsell.gc.ca/tenders.  It is the responsibility of the Bidder to ensure that all addenda issued prior to solicitation closing have been obtained and addressed in the submitted offer.  Sealed offers will be received in English, or French at:  Public Works and Government Services Canada, Bid Receiving Unit, 10 Barter's Hill, P.O. Box 4600, St. John's, Newfoundland and Labrador A1C 5T2.  Bid Security is not a requirement for this tender.  GSIN: E199H  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.
  • 1