Public tenders for environment in Halifax Canada

Find all Environment tenders in the world.
Finding business opportunities has never been easier.

Results for environment. Make a new search!

Concept for an Underwater Acoustic Communication Network in an Arctic Environment

Department of National Defence | Published August 22, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: If 2+ bids offer Canadian goods/services other bids will not be considered Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Concept for an Underwater Acoustic Communication Network in an Arctic Environment    W7707-175897/A LeBlanc, JoAnne Telephone No. - (902) 496-5010  Fax No. - (902) 496-5016   Requirement: Defence Research & Development Canada (DRDC) Atlantic Research Centre (ARC) is currently investigating concepts for an underwater acoustic communication network for use in an Arctic environment. In support of that work, DRDC has a requirement to design and investigate communication protocols, acoustic sources and acoustic receivers to enable such an underwater communication network.    The communication network is intended to support underwater sensing nodes, such as: seabed hydrophone arrays, vertical line hydrophone arrays (moored or surface-float suspended), and unmanned underwater vehicles (UUVs), potentially towing a hydrophone line array. The communication network would provide a link between those sensing nodes over long ranges, on the order of 100-400 kilometers, and would enable the transfer of sensor information between network nodes and navigation data for mobile sensing nodes.  The solicitation document contains complete details on the requirement and the bid evaluation and contractor selection methodology.   This requirement contains Canadian Content.   Time Schedule: The period for this contract will be 5 months from date of contract award.  Basis of Selection: Will be based on the highest point rated compliant bid within statement maximum budget.  Funding: The maximum fundingavailable for the contract resulting from the bid solicitation is $100,000.00 + applicable taxes.   This PWGSC office provides procurement services to the public in English.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

SharePoint Web Hosting

Public Works & Government Services Canada | Published April 27, 2015
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Public Works and Government Services Canada (PWGSC) Atlantic has the following requirements for web hosting. Bidders may bid on either of the requirements or both of the requirements. The duration of the requirements is for a one year period from date of award with 2 additional one year option periods. 1. PWGSC Atlantic requires a fully managed, MS SharePoint hosting environment accessible by PWGSC, various levels of government and private sector partners to facilitate document sharing and team collaboration in a flexible, reliable and cost effective web based environment. 2.PWGSC Atlantic requires a fully managed, ESRI ArcServer 10.x GIS hosting environment accessible by PWGSC, various levels of government, and private sector partners, to facilitate information sharing and team collaboration in a flexible, reliable and cost effective web based environment. The hosting environment for all programs must be located exclusively within Canadian borders, including but not limited to the hosting of any online or offline copies of the data. The hosting environment must meet CISD (Canadian Industrial Security Directorate) hosting requirements as outlined in the Security Requirement Check List (SRCL). The GIS web interface must be accessible over SSL encryption (https). The Contractor must perform the Work in accordance with the Statement of Work at Annex A1 for SharePoint hosting requirements and Annex A2 for GIS hosting requirements. There are security requirements associated with this requirement. For additional information, consult Part 6 - Security, Financial and Other Requirements, and Part 7 - Resulting Contract Clauses. For more information on personnel and organization security screening or security clauses, bidders should refer to the Industrial Security Program (ISP) of Public Works and Government Services Canada (http://ssi-iss.tpsgc-pwgsc.gc.ca/index-eng.html) website. As per the Integrity Provisions under section 01 of Standard Instructions 2003 and 2004, bidders must provide a list of all owners and/or Directors and other associated information as required. Refer to section 4.21 of the Supply Manual for additional information on the Integrity Provisions. For services requirements, Bidders must provide the required information as detailed in article 2.3 of Part 2 of the bid solicitation, in order to comply with Treasury Board policies and directives on contracts awarded to former public servants. The requirement is subject to the provisions of the World Trade Organization Agreement on Government Procurement (WTO-AGP), the North American Free Trade Agreement (NAFTA), and the Agreement on Internal Trade (AIT). The full requirements are detailed in the solicitation document. This office provides service in English. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Portable Oxygen Detector

Environment Canada | Published June 8, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Environment and Climate Change Canada, Dartmouth, NS, has a requirement for thirty (30) portable oxygen detectors and fifteen (15) calibration kits.  Full technical specifications are detailed in the Request for Proposals document.   This office provides service to the public in English. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Marine Water Quality Monitor

Environment Canada | Published August 17, 2017
cpvs

Trade Agreement: WTO-AGP/NAFTA/CFTA/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   MARINE WATER QUALITY MONITORING  Public Services and Procurement Canada on behalf of the Environment and Climate Change Canada (ECCC) in Nova Scotia, has the requirement:   To carry out annual bacteriological water quality surveys of bivalve molluscan shellfish growing areas in order to evaluate whether the classified harvest areas continue to meet the Canadian Shellfish Sanitation Program (CSSP) and (American) National Shellfish Sanitation Program [NSSP] classification standards. This requirement requires surveying in selected shellfish growing areas throughout Nova Scotia from Cape North to Yarmouth.  The initial proposed period of work for Nova Scotia would be from date of contract award  (estimated around October 1, 2017) to March  31, 2018. Environment & Climate Change Canada may extend and expand the option years for an extra four years (April 1st,  2018 to March 31st, 2019 and April 1st, 2019 to March 31st, 2020 and April 1st, 2020 to March 31st, 2021 and April 1st, 2021 to March 31st, 2022).     INQUIRIES:   All inquiries of a technical nature and all questions of a contractual nature are to be submitted to the Contracting Authority: Darren Conrad.  Telephone 902.496.5353 Email:  darren.conrad@pwgsc.gc.ca    Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  The requirement is subject to the provisions of the World Trade Organization Agreement on Government Procurement (WTO-AGP), the North American Free Trade Agreement (NAFTA), and the Canadian Free Trade Agreement (CFTA).  This PWGSC office provides procurement services in English.  The Crown retains the right to negotiate with suppliers on any procurement.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Condensation Particle Counter

Environment Canada | Published October 11, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Environment and Climate Change Canada, Dartmouth, NS,  has a requirement for the supply and delivery only of one (1) condensation particle counter.  Full technical requirements form part of the request for proposals document.  This solicitation is subject to the following trade agreements:  AIT/NAFTA/Canada FTA's with Peru/Columbia/Panama  This office provides service to the public in English. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

SUB-BOTTOM PROFILER TOW WINCH

Natural Resources Canada | Published December 13, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: If 2+ bids offer Canadian goods/services other bids will not be considered Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   SUB-BOTTOM PROFILER TOW WINCH  23420-170941/A Dunphy, Nancy Telephone No. - (902) 496-5481  Fax No. - (902) 496-5016   Public Services and Procurement Canada (PSPC) on behalf of Natural Resources Canada has a requirement for a MARINE WINCH. The purpose of the winch is to deploy, operate and recover a towed sub-bottom profiling vehicle at water depths up to 600 meters from a vessel surveying at 5 knots.  Operating Environment The winch is required to operate in the marine environment.  Adverseweather conditions may subject the winch to immersion in sea water.  Associated impact and shock loadings may result from violent ship movements.  In northern waters it may be subjected to ice build-up and abuse resulting from removal of this ice.  Please see Annex A herein for further specifications. All items noted in this specification must be included in the basic configuration.  The MARINE WINCH must meet all mandatory technical requirements to deemed compliant in PART 4 Article 4.1.1.  Delivery is MANDATORY on or before March 31, 2017.  If delivery cannot be met, the contract will be terminated.  This requirement is subject to the Agreement on Internal Trade  (AIT).  INQUIRIES: All inquiries of a technical nature and all questions of acontractual nature are to be submitted to the Contracting Authority: Nancy Dunphy, telephone (902) 496-5481, facsimile: (902) 496-5016: email:nancy.dunphy@pwgsc-tpsgc.gc.ca. Inquiries are to be made in writing and should be received no less than five (5) calendars days prior to the closing date to allow sufficient time to respond.  This PWGSC office provides procurement services to the public in English.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.     Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Marine Grade Fibre Optic Cable

Natural Resources Canada | Published February 10, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Marine Grade Fibre Optic Cable  23420-160902/A Collier, Susan Telephone No. - (902) 496-5350 (    ) Fax No. - (902) 496-5016 (    )  Nature of Requirements:   PWGSC on behalf of NRCan has a requirement to supply and deliver a Marine grade fibreoptic cable.  The purpose of this cable is to secure , tow and ensure communications with a deep tow vehicle at water depths up to 3500 meters.  Environment: The cable is requred to operate in a marine environment. The cable will be subject to immersion in seawater. Associated impacts and shock loadings may result from violent ship movement. It may be exposed to temperatures as low as -20C.  The cable shall be capable of operating under specified minimum working load. Breaking strength shall meetor exceed requirements. Bend radius weight in seawater and cable diameter shall be as specified or lower in order to be compatible with existing winches.   The cable shall have no electrical conductor embedded within, but shall have 3 or more single mode fibre optic lines of type SMF28 or better.  Cable properties: - Minimum working load: 1000Lbf - Minimum breaking strength: 5000 Lbf - Maximum  bend radius: 10" - Maximum weight in seawater: 10Lb/1000ft - Maximum cable diameter: 0.42" - Abrasion-resistant jacket (Polyurethane) - Cable length 3500m  Please see Specification for a complete detail listing of the requirement.  Evaluation:Bidders must meet all technical requirements and will be evaluated on a pass or fail. The lowest responsivebid that meets the technical requirements will be recommended for award.  Delivery Date: All the deliverables must be received on or before July 27, 2016.   Trade Agreements:   Agreement on Internal Trade (AIT)  Canada-Colombia Free Trade Agreement  Canada-Peru Free Trade Agreement (CPFTA)  North America Free Trade Agreement (NAFTA)  Canada-Panama Free Trade Agreement  Tendering Procedures: Allinterestedsuppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No  INQUIRIES: All inquiries of a technical nature and all questions of a contractual nature are to be submitted to the Contracting Authority: Susan Collier, susan.collier@pwgsc.gc.ca, facsimile: (902) 496-5016.   Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time  to respond.   This PWGSCOffice provides procurement services in English.  The Crown retains the right to negotiate with suppliers onany procurement.  Documents may be submitted in either official language of Canada.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Tank Farm Decommission

Public Works and Government Services Canada | Published March 1, 2017
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Suppliers on permanent list or able to meet qualification requirements Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Tank Farm Decommission  EB144-172811/A MacDonald (PWA), Isabelle Telephone No. - (902) 496-5025 (    ) Fax No. - (902) 496-5016 (    )  This requirement is open only to invited suppliers under the Heavy Civil Engineer Supply Arrangement E0225-141687 who qualified under Structural Engineering in the geographic region of Nova Scotia.  The following SA Holders have been invited to submit a proposal:  Stantec Consulting Norda Stelo  Valron Structural Engineers  JOMA Engineering Group   PWGSC,on behalf of Environment Canada is seeking proposals from Consultants to develop the design and specifications for the tank farm demolition and removal for 9 previously cleaned hydrocarbon storage tanks located on Sable Island, NS.  Contracting Authority: Isabelle MacDonald Isabelle.macdonald@pwgsc-tpsgc.gc.ca Telephone: 902-496-5025 Note:  The Heavy Civil Engineering Supply Arrangement is subject to an annual refresh.  If you wish to become a Qualified SA Holder, please contact Kathie Taylor at Kathie.taylor@tpsgc-pwgsc.gc.ca   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Tank Cleaning - Sable Island

Public Works and Government Services Canada | Published January 26, 2017
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Tank Cleaning - Sable Island  EB144-172457/A MacDonald (HAL), Isabelle Telephone No. - (902) 496-5025 (    ) Fax No. - (902) 496-5016 (    )  Public Service and Procurement Canada, on behalf of Environment and Climate Change Canada, is seeking bids to clean nine (9) above ground fuel storage tank systems located at t the Sable Island National Park Reserve, Sable Island, NS.  The purpose of the project is to ensure the tanks are cleaned in compliance with all regulations for the subsequent removal from Sable Island.  The work is expected to be completed before March 31, 2017.  The Contractor will be required to conduct a site visit to Sable Island prior to beginning the work.  Contact:  Isabelle MacDonald isabelle.macdonald@pwgsc-tpgsc.gc.ca 902-496-5025 Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Rigid Hull Inflatable Boat

Environment Canada | Published October 13, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   GSIN: N1940DA RIGID HULL INFLATABLE BOAT  Public Works and Government Services Canada (PWGSC) on behalf of Environment and Climate Change Canada has requirement for a rigid inflatable boat with twin engines (21-feet long with 75 horse power engines) and a boat trailer in accordance with Annex A - Boat Specification.  Delivery Date: All deliverables must be received on or before March 31, 2017.  INQUIRIES: All inquiries of a technical nature and all questions of a contractual nature are to be submitted to the Contracting Authority: Dave Dunne, telephone (902) 496-5174, facsimile: (902) 496-5016, and email: Dave.Dunne@tpsgc-pwgsc.gc.ca. Inquiries are to be made in writing and should be received no less than five(5) calendar days prior to the closing date to allow sufficient time to respond.  There is no security requirement for this procurement.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Tank System Removal/Installation

Public Works and Government Services Canada | Published July 25, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Tank System Removal/Installation  EB144-170867/A MacDonald (PWA), Isabelle Telephone No. - (902) 496-5168 (    ) Fax No. - (902) 496-5016 (    )  The Department of Public Works and Government Services Canada has a requirement, on behalf of Environment and Climate Change Canada, to replace the Sable Island fuel storage tank system and remove the old tanks.  The replacement of the fuel storage tank system is to be completed by October 30, 2016.  The removal of the old tank system from Sable Island is to be completed by March 31, 2017.  Inquiries:  All inquiries of a technical nature and all questions of a contractual nature are to be submitted to the Contracting Authority:  Isabelle MacDonald, telephone 902-496-5168, email: isabelle.macdonald@pwgsc-tpsgc.gc.ca, facsimile: 902-426-5016.  Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  The estimated cost of this project is $145,000.00.  The Crown retains the right to negotiate with suppliers on any procurement.    Delivery Date: 22/07/2016  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Cape Scott First Aid Attendant Services

Department of National Defence | Published November 8, 2017
cpvs

Trade Agreement: NONE Tendering Procedures: The bidder must supply Canadian goods and/or services Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:    W3554-186240/A Mosher, Gina Telephone No. - (902) 403-7836 (    ) Fax No. - (902) 496-5016 (    )  First Aid Attendant Services  The Department of National Defence has a requirement for to provide First Aid services to the Fleet Maintenance Facility Cape Scott (FMFCS) Halifax, Nova Scotia.  To ensure that FMFCS maintains a safe and healthy working environment, a qualified First Aid Attendant is required on-site to respond to emergency first aid situations as required.   Further details can be found in the Request for Proposal Documentation.  This requirement also contains security requirements.     Period of Contract:  The requirement is for a one (1) year period with the option to extend for an additional three (3) one (1) year periods.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

ARCTIC CAMP COOKING SERVICES, DEVON ISLAND, NUNAVUT

Department of National Defence | Published April 17, 2015
cpvs

Trade Agreement: NONE Tendering Procedures: The bidder must supply Canadian goods and/or services Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: Yes Nature of Requirements: ARCTIC CAMP COOKING SERVICES W7707-155819/A LeBlanc, JoAnne Telephone No. - (902) 496-5010 Fax No. - (902) 496-5016 Title: Arctic Camp Cooking Services for Northern Watch Technology Demonstration Project There is a security clearance requirement associated with this proposed service contract. This requirement is subject to Canadian Content. This requirement is subject to the Nunavut Land Claims Agreement (NLCA). Requirement Under the Northern Watch Technology Demonstration Project (TDP), DRDC Atlantic will be conducting a trial at an Arctic field camp located on Gascoyne Inlet, on south west corner of Devon Island, Nunavut. The requirement of this contract is to provide cooking services for the Arctic camp during the field trial. The requirement is for a Senior Cook, with experience preparing nutritious meals in a camp environment, managing a camp kitchen, developing menus and providing food order lists. The requirement is for the 2015 field trial season. DRDC is responsible for purchasing food orders and arranging transport of food orders to the camp. Time Schedule - 2015 Field Trial Milestones Award of Contract May 2015 Submission of Food Order to DRDC June 1, 2015 Charter flight (Ottawa to Resolute) July 19, 2015 Cook in Camp July 23 - September 15, 2015 Field Trial July 20 - September 15, 2015 Submission of Replenishment Food Order August 7, 2015 Mandatory Requirements: Must provide a resume that clearly states that the mandatory criteria are met and must provide references from at least their 3 most recent relavent jobs. Minimum 2 years experience working in a remote field camps as a cook. Knowledge of safe food handling, preferably with a recognized training course on food handling and safety (e.g. provincial food handler certificate or equivalent) Standard First Aid Course (must provide proof of successful completion) Must be medically fit for a safe food handling and working in a remote field camp environment, as proven by physician certificate (or letter) dated on or after January 1, 2015 Basis of Selection: A bid must comply with the requirements of the bid solicitation and meet all mandatory and technical criteria to be declared responsive. The supplier with highest point rated within budget will be recommended for award of a contract. Funding: The maximum funding available for the Contract resulting from the bid solicitation is $60,000.00 + applicable taxes. The Solicitation document contains complete details on the requirement and the bid evaluation and contractor selection methodology. This PWGSC Office provides procurement services to the public in English. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

RISO - Various Compressed Gases

Environment Canada | Published May 16, 2017
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   TITLE: RISO - Various Compressed Gases  K4B20-171799/A Dunphy, Nancy Telephone No. - (902) 496-5481  Fax No. - (902) 496-5016   Public Services and Procurement Canada on behalf of Environment and Climate Change Canada, Atlantic Region, has a requirement for various compressed gases to support meteorological and scientific/analytical services at its upper air monitoring stations and laboratories throughout the region.  The gas types/descriptions, units, estimated quantities, and delivery locations are listed herein.  Goods are to be supplied on an "as and when" requested basis, in accordance with the terms and conditions detailed in the standing offer document .  The period of the standing offer is anticipated to be from issuance for  one (1)year with three (3), one (1) year optional periods.  Offerors must refer to the Request for Standing Offer document for complete details regarding this requirement.  INQUIRIES: All inquiries of a technical nature and all questions of a contractual nature are to be submitted to the Contracting Authority: Nancy Dunphy, telephone (902) 496-5481, facsimile: (902) 496-5016, and email nancy.dunphy@pwgsc.gc.ca. Inquiries are to be made  in writing andshould be received no less than five (5) calendardays prior to the closing date to allow sufficient time to respond.  This requirement is subject to the North American Free Trade Agreement (NAFTA), World Trade Organization Agreement on Government Procurement (WTO-AGP), Agreement on Internal Trade (AIT), Canada-Chile, Canada-Peru and Canada-Culombia trade agreements   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

PORTABLE FLUOROMETER

Agriculture and Agri-Food Canada | Published October 31, 2017
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   PORTABLE FLUOROMETER  Public Services and Procurement Canada on behalf of Agriculture and Agri-Food Canada Nova Scotia, has the requirement for a portable fluorometer for the Kentville Research and Development Centre.  A fluorometer is a device that is used to measure plant-based energy emission (ie. fluorescence) that results from de-excitation of molecules that absorb light energy (eg. chlorophyll pigments). The fluorescence signatures generated by pigment de-excitation and measured by a fluorometer are used to determine the state of plant organ health (eg. stressed vs non-stressed) as influenced by several variables like natural growth cycles, the growing environment and the storage atmosphere in which plant organs are held (eg. low oxygen apple storage rooms ). Thus, fluorometers  are used by AAFC scientists to determine important physiological states of plant organs which can have a significant impact on commercial outcomes of horticulturally valuable products (eg. apples, pears).    The portable fluorometer must be delivered to the The Kentville Research and Development Centre in Kentville, Nova Scotia by March 30, 2018.   INQUIRIES:   All inquiries of a technical nature and all questions of a contractual nature are to be submitted to the Contracting Authority: Darren Conrad.  Telephone 902.496.5353 Email:  darren.conrad@pwgsc.gc.ca    Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA), and the Canadian Free Trade Agreement (CFTA).  This PWGSC office provides procurement services in English.  The Crown retains the right to negotiate with suppliers on any procurement.  Delivery Date: 30/10/2017  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Surface Combatant Design

Department of National Defence | Published June 28, 2016
cpvs

Trade Agreement: NONE Tendering Procedures: If 2+ bids offer Canadian goods/services other bids will not be considered Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Title: Surface Combatant Design  W7707-175891/A Dunphy, Nancy Telephone No. - (902) 496-5481  Fax No. - (902) 496-5016  Email: nancy.dunphy@pwgsc-tpsgc.gc.ca  Defence Research and Development Canada (DRDC), Atlantic is developing a better understanding of the Arctic operational environment and ship-ice interactions in order to provide scientific and technical advice to the Royal Canadian Navy.  The initial phase of the work was conducted by Daley R&E in FY 2014/15 and successfully determined the safe speed in ice for the DRDC Notional Destroyer using structural design data based on the amidships cross section. The analysis considered contact of the hull with a single ice flow, and determined the safe speed envelopes based on various limit states of plastic deformation damage. This initial assessment was quite informative as to the ice-going capability of non-ice class surface combatants in general, and overall was conservative in its assumptions. In the present contract, the intent is to repeat the FY14/15 assessment using a more realistic hull structure design for the bow section, which is to be provided by DRDC. When this assessment is completed, simulations of the notional destroyer transiting through partially ice-covered waters will be conducted to determine the largest impact forces and likely damage that may occur. Please see herein for further details in Annex A and Annex C for the Evaluation criteria.  The proposed period of the contract from award to March 31, 2017.    The maximum funding for the firm requirement is $40,000.00 (HST extra).  The intellectrual property arising from the contract will vest with Canada.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Out-Service Training for DND, Canadian Forces School of Military Engineering

Department of National Defence | Published July 7, 2015
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Best Overall Proposal Comprehensive Land Claim Agreement: No Nature of Requirements: To Provide Out-Service Training for Department of National Defence, Canadian Forces School of Military Engineering (CFSME) The Out-Service Training (OST) program is intended to augment the capability of the Canadian Forces School of Military Engineering (CFSME) to meet the mandate of the Department of National Defence (DND) to train construction engineering technicians of the Canadian Forces (CF). This scope of work (SOW) and subsequent contract will ensure that all aspects of the program requirements are formalized. It defines the requirement of CFSME for the provision of customized training of students at a post-secondary vocational institute. This OST program will be conducted at a recognized, post-secondary vocational institute. The courses required to be delivered will involve the following construction technical trades, which are categorized and identified as Military Occupation Specification Identification (MOSID) a) MOSID 00301 Refrigeration & Mechanical Technician (RM Tech), b) MOSID 00302 Electrical Distribution Technician (ED Tech), c) MOSID 00303 Electrical Generation Systems Technician (EGS Tech), d) MOSID 00304 Plumbing & Heating Technician (PH Tech), e) MOSID 00305 Water, Fuels & Environment Technician (WFE Tech), and f) MOSID 00306 Construction Technician (Const Tech). The maximum and minimum enrolments for each of the six trades are 16 and 8 students, respectively, per course. These figures are provided for proposal purposes only. DND cannot guarantee with any certainty the number of students that will be enrolled per course. The period of work shall be from date of award up to and including May 31, 2018 with the option to extend the Contract for 2 additional periods. The first period is for 12 months and the second period is for 18 months. This PWGSC office provides procurement services to the public in English. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

LITHOS Training Course

Department of National Defence | Published November 9, 2017
cpvs

Trade Agreement: Canadian Free Trade Agreement (CFTA) Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  CAE INC 8585 COTE DE LIESSE ST-LAURENT Quebec Canada H4T1G6 Nature of Requirements:   LITHOS TRAINING  1. Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.   2. Definition of the requirement  The Department of National Defence (DND) 14 Wing Greenwood in Nova Scotia has a requirement for the delivery of LITHOS Training.  The Chief Simulation Officer (CSimO) at 404 Long Range Patrol and Training (LRP&T) Squadron is responsible to the Commanding Officer for the operation of flight simulation devices. In order to generate airfield environments for use in simulation, developers need to be trained in the use of developmental products, such as Lithos.  3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)  Any interested supplier must demonstrate by way of a statement of capabilities that its product meets the following requirements:   Lithos is a CAE product utilized within the Aurora simulation support environment for the generation of airfields for use in the Full Flight Simulator (FFS) and Cockpit Procedures Trainer (CPT). In order to properly utilize the software package, specialist training for developers will be required at 14 Wing Greenwood.  TERMINOLOGY Common Database (CDB) Visual Database (VDB) Full Flight Simulator (FFS) Cockpit Procedures Trainer (CPT) Database Management System (DBMS).  REASON FOR TRAINING Training for two simulation developers at 404 Sqn is required to allow the proper development of airfield environments using the Lithos tool. Training will include Visual Database (VDB) and Common Database (CDB) lectures conducted and will be conducted at 14 Wing Greenwood utilizing the Database Management System (DBMS). The successful training will allow the developers to independly design, develop, test and deploy stable airfield products for use in the CP140M Aurora Full Flight Simulator (FFS) and Cockpit Procedures Trainer (CPT).  INSTRUCTOR QUALIFICATIONS The instructor must have a Lithos VDB and CDB development qualification, must have previous experience instructing the use of the Lithos software, and have a minimum of two (2) years experience developing Lithos products.  COURSE CONTENT a) Work Environment Setup  using DBMS, Windows Operating System, ArcGIS, Creator and Photoshop tools, establish a functional working environment; b) CDB and VDB Overviews  review individual standards, demonstrate CDB workflow; c) Initializing a Development Project  define VDB design parameters, create a new project; d) Basic Scene Development  collect data from a variety of sources, apply Lithos workflow to project, process altimetry and planimetry, build project library; e) Terrain Generation  select and edit sources, publish and verify elevation datasets;; f) Imagery Generation  select and edit sources, publish and verify imagery datasets, create and process pseudo-imagery sources; g) Enhance Terrain  enhance terrain with advanced techniques, build runway profiles, run Lithos terrain generator; h) Building 2D Aerodrome  create background image, trace primary and secondary components, structrure the ICAO_2D.flt file, create airport lights, demonstrate airport 2D workflow; i) Building Aerodrome Insets  trace a CDB-compliant airport geometry, add an airport inset while building library support; j) Building 3D Models  comply with CDB modeling conventions, publish and verify 3D model datasets, review existing models; k) Generate Lights and Typical Trees  publish and verify airport lights and environmental lights, introduce navigational data and versioning, publish and verify geo-typical features such as trees; l) Create Custom Lithos Features  create and edit shapefiles, script within Lithos rules, create 3D with Lithos ExtrusionPublisher feature, build template database; m) Generate Vector Datasets  publish and verify Topology Networks dataset, publish and verify Vector datasets (aerial and linear features); n) Generate Sensor Material  create material sources from vector data and library definitions, use Lithos Rasteriser, publish and verify Raster Material datasets; and o) Maintain the DBMS  install visual database sources, upgrade the workstation.   CONSTRAINTS Start date to be determined, course to be conducted over 30 consecutive business days between 1 Jan 2018 and 31 Mar 2018.  4. Applicability of the trade agreement(s) to the procurement  This procurement is subject to the following trade agreement(s)  Canadian Free Trade Agreement (CFTA)  5. Justification for the Pre-Identified Supplier  The supplier selected in advance and identified in section 10, CAE, is to our knowledge the only supplier meeting all the specifications required in the section 3.    6.Government Contracts Regulations Exception(s)  The following exception to the Government Contracts Regulations is invoked for this procurement under subsection 6(d) - only one person is capable of performing the work.  7. Exclusions and/or Limited Tendering Reasons  The following exclusion(s) and/or limited tendering reasons are invoked under the:   Canadian Free Trade Agreement (CFTA)  Article 513.1 (b) (ii)   8. Period of the proposed contract or delivery date  The training must be completed prior to 31 March 2018.  9. Cost estimate of the proposed contract  The estimated value for this notice is in the following cost category:  between $50,000.00 and $100,000.00 (applicable taxes included).  10. Name and address of the pre-identified supplier  CAE Inc. 8585 Cote-de-Liesse  Saint Laurent, Quebec   H4T 1G6  Canada  11. Suppliers' right to submit a statement of capabilities  Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how thesupplier meets the advertised requirements.  12. Closing date for a submission of a statement of capabilities  The closing date and time for accepting statements of capabilities is:  2:00 p.m. AST, Friday, 24 November 2017  13. Inquiries and submission of statements of capabilities  Darren Conrad Supply Specialist Public Services and Procurement Canada Atlantic Region - Acquisitions Branch  1713 Bedford Row Halifax, Nova Scotia B3J 3C9 Telephone:  (902) 403-8584 Facsimile:  (902) 496-5016 E-mail address:  Darren.Conrad@pwgsc-tpsgc.gc.ca    Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

RISO - FUEL TANK SYSTEMS REPAIRS AND REPLACEMENT CFB HALIFAX, NS

Department of National Defence | Published September 28, 2015
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: RISO - FUEL TANK SYSTEMS REPAIRS AND REPLACEMENT - CFB HALIFAX, NS W6837-155531/A Dunphy, Nancy Telephone No. - (902) 496-5481 Fax No. - (902) 496-5016 Work under this Standing Offer comprises the furnishing of all WORK labour, material, tools, equipment and supervision required to conduct repairs, replacements and removals of fuel storage tank system installations (underground and aboveground), as directed by the Engineer, in all areas of CFB Halifax. Note: System includes tank and all appurtenances, piping, valves, pumps, gauges, electronic monitoring equipment, card reading equipment, grounding, concrete slab, steel steps, vehicle protection and signage. Types of systems include: .1 #2 heating fuel; .2 Heated bunker fuel; .3 Gasoline and diesel fuel dispensing; .4 Diesel generators; and .5 Waste oil. Mandatory: Tank installation must be performed by a petroleum storage equipment installer, Class I, certified by the Nova Scotia Department of Environment and Labour and contractor must submit certificate with offer. The Contractor must be able to provide a qualified Construction Electrician Journeyperson who is registered with the Department of Labour in the Province of Nova Scotia. There is a Security Requirement associated with the requirement of the Standing Offer. The period for making call-ups against the Standing Offer is from one (1) year from date of award with an additional two (2), 12 month extended periods. INQUIRIES: All inquiries of a technical nature and all questions of a contractual nature are to be submitted to the Contracting Authority: Nancy Dunphy, telephone (902) 496-5481, facsimile: (902) 496-5016. Inquiries are to be made in writing and should be received no less than seven (7) calendars days prior to the closing date to allow sufficient time to respond. This requirement is subject to Agreement on Internal Trade (AIT), North American Free Trade Agreement (NAFTA), World Trade Organization Agreement on Government Procurement (WTO-AGP), Canada-Chile Free Trade Agreement, Canada-Columbia Free Trade Agreement, and the Canada-Peru Free Trade Agreement. This PWGSC office provides procurement services in English Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Education Services/ Services

Correctional Service of Canada | Published January 21, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   The Correctional Service of Canada (CSC) wishes to provide an inmate targeted education program, including library services and a vocational component at Springhill Institution.  This education program will be designed to address identified criminogenicfactors for inmates housed in this Institution. The program must be suited to the learning needs of an adult, male population and make the best possible use of the opportunities for learning, which exist within the Institution.  The correctional educator will be working in a less than ideal educational environment and will be required to teach some inmates with limited commitment, cognitive ability and a history of failure during their public school experience. It will be the role of the correctionaleducator to create the environment that will enable his/her inmate students to meet educational goals identified within their Correctional Plans.  The objective of the education program is to consistently work with the inmate student and ensure every possible avenue is used to have him participate and be successful in the program designed to reduce risk and assist him in re-entering society as a productive and law abiding citizen.  Having regard for the special characteristics and educational needsof inmates, the contractor agrees to provide the necessary personnel, back-up personnel, and support staff, as well as special expertise to carry out the services.  The Contractor will provide fully qualified and provincially certified teachers.  The Contractor will provide the following staff:  a. Teachers (4) - Academic Upgrading b. Teacher (bilingual) (1) - Academic Upgrading c. Library Technician (1) d. Teacher (1) - Vocational Training  Teaching services are required for two hundred twenty-one (221) days in the Academic Upgrading program per calendar year for a total of 35 hours per week per teacher.  The Contractor may be required to provide previously approved substitute teachers during absences of regular teaching staff.   LibraryServices are required for 221 days per calendar year with a total of 30 hours per week.   The 30 hours per week is divided over 5 days per week.  The period of the contract is anticipated to be April 1, 2016 to March 31, 2017.  There are 4 additional option periods of 1 year each.  There are security requirements associated with this requirement.   At the time of bid closing, the following conditions must be met:  (a) the Bidder must hold a valid organization security clearance as indicated in Part 7 - Resulting Contract Clauses;  (b) the Bidder's proposed individuals requiring access to classified or protected information, assets or sensitive work site(s) must meet the security requirements as indicated in Part 7 - Resulting Contract Clauses;  (c) the Bidder must provide the name of all individuals who will require access to classified or protected information, assets or sensitive work sites;   1.  The Contractor/Offeror must, at all times during the performance of the Contract/Standing Offer, hold a valid Designated Organization Screening (DOS), issued by the Canadian Industrial Security Directorate (CISD), Public Works and Government Services Canada (PWGSC).   2.  The Contractor/Offeror personnel requiring access to PROTECTED information, assets or sensitive work site(s) must EACH hold a valid RELIABILITY STATUS, granted or approved by CISD/PWGSC.  3.  The Contractor/Offeror MUST NOT remove any PROTECTED information or assets from the identified work site(s), and the Contractor/Offeror must ensure that its personnel are made aware of and comply with this restriction.  4.  Subcontracts which contain security requirements are NOT to be awarded without the prior written permission of CISD/PWGSC.  5. For additional information on security requirements, Bidders should refer to the Industrial Security Program (ISP) of Public Works and Government Services Canada (http://ssi-iss.tpsgc-pwgsc.gc.ca/index-eng.html) website.  The requirement is subject to the provisions of the World Trade Organization Agreement on Government Procurement (WTO-AGP), the North American Free Trade Agreement (NAFTA), and the Agreement on Internal Trade (AIT).  This Public Works and Government Services Canada office provides procurement services to the public in English.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.