Call +44 800 9755 164

Public tenders for environment in Calgary Canada

Find all Environment tenders in the world.
Finding business opportunities has never been easier.

Results for environment. Make a new search!

Spectrometer

Environment Canada | Published August 29, 2016  -  Deadline November 10, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Spectrometer  K4E21-160010/A Blake, Luke J. Telephone No. - (403) 613-0725 (    ) Fax No. - (403) 292-5786 (    )  Line 1, Spectromètre  Environment Canada (Prairie & Northern Laboratory for Environmental Testing (PNLET) in Edmonton) requires the purchase of one (1) Energy Dispersive X-ray Fluorescence Spectrometer (EDXRF) System for the quantitative and qualitative analyses of a wide variety of materials.  This instrument will be used as a forensic analysis tool for the enforcement of Canadian environmental regulations under the Canadian Environmental Protection Act (CEPA), Fisheries Act and other related acts/regulations as well as new method development and environmental research projects.  All equipment must be NEW.  Demonstration, used, refurbished or prototype models will not be considered.  Total system must be received and installed including all instructions to Environment Canada staff on or before March 15, 2017. Environment Canada anticipates two to three staff members will require training, and that training will take approximately eight hours. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Thermocycler

Environment Canada | Published January 28, 2016  -  Deadline August 3, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Thermocycler  K4E21-150019/B Denadi, Gilles Telephone No. - (403) 612-9648  Fax No. - (403) 292-5786   This bid solicitation cancels and supersedes previous bid solicitation number K4E21-150019/A dated September 4, 2015 with a closing of November30, 2015 at 02:00 PM (MST). A debriefing or feedback session will be provided upon request to bidders/offerors/suppliers who bid on the previous solicitation.   Requirement:  For the supply, delivery, installation and on-site training of one (1) newdigital RT- PCR machine and accessories, to Environment Canada, Watershed Hydrology Research Division (WHERD), National Hydrology Research Centre (NHRC), Saskatoon, Saskatchewan.   FOB Destination:   Environment Canada, Watershed Hydrology ResearchDivision (WHERD),National Hydrology Research Centre (NHRC),  11 Innovation Blvd, Saskatoon, Saskatchewan S7N 3H5   Delivery Date:   All the deliverables to be received on or before May 13, 2016.   Specifications:  See solicitation bid documentfor full details.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Thermocycler

Environment Canada | Published September 8, 2015  -  Deadline October 19, 2015
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: K4E21-150019/A Denadi, Gilles Telephone No. - (403) 612-9648 Fax No. - (403) 292-5786 REQUEST FOR PROPOSAL THERMOCYCLER Requirement For the supply, delivery, installation and on-site training of one (1) new digital RT- PCR machine and accessories, to Environment Canada, Watershed Hydrology Research Division (WHERD), National Hydrology Research Centre (NHRC), Saskatoon, Saskatchewan. Delivery Date: All the deliverables to be received on or before November 30, 2015. FOB destination: Environment Canada, Watershed Hydrology Research Division (WHERD),National Hydrology Research Centre (NHRC), 11 Innovation Blvd, Saskatoon, Saskatchewan. Trade Agreements: The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA) and the Agreement on Internal Trade (AIT). Specifications: See Solicitation bid document for full details. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Gas Chromatograph

Environment Canada | Published November 27, 2015  -  Deadline December 14, 2015
cpvs

Trade Agreement: World Trade Organization - Agreement on Government Procurement (WTO-AGP) Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address: C.D. Nova Ltd. C. D. Nova Ltd. 5330 Imperial Street Burnaby British Columbia Canada V5J1E6 Nature of Requirements: ACAN GAS CHROMATOGRAPHY SYSTEM, K4E21-150027/A Yu, Jenny Telephone No. - (403) 292-5795 Fax No. - (403) 292-5786 1. Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a departmentor agency intends to award a contract for goods, services or co nstruction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a st atement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. 2. Requirement Public Works and Government Services Canada (PWGSC) on behalf of its client, Environment Canada, intends to enter into a Contract with CD Nova Instruments Ltd. for the supply and delivery of the specified Gas Chromatography System: Synspec SYNTECH SPECTRAS GC955 600-Series PID- GC (GC 955 611 POCP C5-C12 #9611-PX2XXS). The instrument will be used in combination with the existing and currently operated Synspec SYNTECH SPECTRAS GC955 600-Series PID- GC equipment by Environment Canadas Science and Technology Branch, Air Quality Science Unit, the Edmonton Air Quality Services Unit (Edmonton AQSU), and other provincial monitoring stations for ongoing VOC monitoring in alignment with the Alberta Environmental Monitoring, Evaluation and Reporting Agency (AEMERA), and the Alberta Environment and Parks Air Monitoring Directives, and the Joint Oil Sands Monitoring Plan. 3. Criteria for assessment of the Statement of Capabilities Suppliers who consider themselves fully qualified and available to provide the goods, services, or construction services described in this AC AN may submit a Statement of Capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. MANDATORY TECHNICAL SPECIFICATIONS VOC AutoGC The automated gas chromatograph (AutoGC) must measure ambient concentrations of several volatile organic compounds (VOCs) semi-continuously (see below), in accordance with European standards and Eu ropean Certification. Environment Canada also requires for the VOC AutoGC to meet the following specifications: The AutoGC must measure ambient concentrations of benzene, toluene, ethylbenzene, and xylenes (i.e., BTEX species) plus other C6 C12 VOCs (s ubstituted aromatics and saturated aliphatics). An internal pre-concentration system allows for low detection limits to trace levels. Semi-continuous, automated operation for sample analyses every 15-30 minutes. Photoionization detector for ease of use and no need for hydrogen gas supply. Unit can be operated remotely by a data logger or other network-based connection to perform multipoint calibrations and ot her routine maintenance. 1. 120 VAC 50/60Hz power supply. 2. Benzene detection limit of approximately 0.1 0.2 ppb. 3. Capable of measuring C6-C12 VOCs at ambient levels, including: Benzene n-Octane Toluene 2 - Methylpentane Ethylbenzene n-Heptane m-/p-Xylenes n-Hexane o-Xylene Methylcyclohexane Styrene 4. Semi-continuous sampling routine, with samples analyzed every 15-30 minutes. 5. Photoionization detector. 6. Onboard data logging capabilities. 7. Standard I/O. 8. Rack Mounts. 4. Applicability of the Trade Agreement(s) to the procurement This procurement is subject to the following trade agreement(s): Agreement on Internal Trade (AIT) World Trade Organization - Agreement on Government Procurement (WTO-AGP) North American Free Trade Agreement (NAFTA) 5. Justification for the Pre-Identified Supplier The Synspec SYNTECH SPECTRAS GC955 600-Series PID- GC Gas Chromatography System is manufactured by Synspec B.V. whom also own the patent and Intellectual Property rights. The identified supplier, CD Nova Instruments Ltd. Is the exclusive, sole approved distributor of th e Synspec system in Canada. The specified Gas Chromatography System will be used in combination with the existing and currently operated Synspec SYNTECH SPECTRAS GC955 600-Series PID- GC units by Environment Canadas Science and Technology Branch, Air Quality Science Unit, the Edmonton Air Quality Services Unit (Edmonton AQSU), and other provincial monitoring stations for ongoing VOC monitoring in alignment with the Alberta Environmental Monitoring, Evaluation and Reporting Agency (AEMERA), and the Alberta Environment and Parks Air Monitoring Directives, and the Joint Oil Sands Monitoring Plan. In addition to compatibility with the other monitoring stations and continuance in existing monitoringefforts along with consistency in years of data collection; the Synspec system has been identified to meet the required specifications for measuring the target analytes in Environment Canadas monitoring program. The extensive tests and st udies by Environment Canada have been based on monitoring and cross-branch data collection with the identified Synspec systems. Using an alternate system will delay the research initiatives by years, along with impacts to operational procedures, and quality assurance pr otocols. Operator familiarity across monitoring stations, compatibility of parts, and existing in-house support were also factors considered in identifying the specified system required. The Synspecs ozone precursor option also meets Environment Canadas compound requirements. 6. Government Contracts Regulations Exception(s) Government Contracts Regulations Exception(s) The following exception to the Government Contracts Regulations is invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work". 7. Exclusions and/ or Limited Tendering Reasons The following exclusions and/or limited tendering reasons are invoked under the: Agreement on Internal Trade (AIT) - Articles 506.12 (a) and 506.12 (b) World Trade Organization - Agreement on Government Procurement (WTO-AGP) - Article XV.1 (b) North American Free Trade Agreement (NAFTA) - Article 1016.2 (b) 8. Deliverables Synspec SYNTECH SPECTRAS GC955 600-Series PID- GC (GC955 611 POCP C5-C12 #9611-PX2XXS) Period of proposed contract delivery date: March 31, 2016. Estimated Value: $ 51,880.00 CAD 9. Pre-identified Supplier: CD Nova Instruments Ltd. Unit 210 120 Pembina Road Sherwood Park, AB T8H 0M2 Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Truck Canopies

Environment Canada | Published December 24, 2015  -  Deadline August 2, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Comprehensive Land Claim Agreement: No Nature of Requirements: Truck Canopies K4E21-150034/A Chan, Linda Telephone No. - (403) 389-1590 ( ) Fax No. - (403) 292-5786 ( ) Requirement For the supply (manufacture and painting) and installation of custom built truck canopies for the Department of Environment Canada, Meteorological Service, Calgary, Alberta, Canada. The Contract period is from the date of Contract award to March 31, 2018. The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA), and the Agreement on Internal Trade (AIT). Specifications See solicitation bid documents for full details. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Data Visualization Computer Coding and Development

National Energy Board | Published July 15, 2016  -  Deadline August 24, 2016
cpvs

Background:

In response to the NEB’s strategic priority of “Engaging with Canadians”, the NEB will be using state-of-the-art interactive visualizations to share data with Canadians. Visualizing data in an interactive and accessible way will place the NEB in a leadership role and will aid the NEB’s communication of pipeline and energy data to: facilitate decision and policy making, increase energy literacy, and increase transparency of NEB data.

Description

The NEB would like to retain the services of a contractor capable of assisting the National Energy Board (NEB) with its objective to deliver new data visualizations and implement improvements to the existing Exploring Canada’s Energy Future data visualizations through their development and maintenance of the computer coding necessary for visualizations. The contractor would provide the technical expertise and ability to develop code and deploy to the NEB web environment.

Period of the Contract:

The term of the contract will be from the effective date of the contract to March 31st, 2017. In addition, the bidder will grant to the National Energy Board two (2) irrevocable options to extend the original term of the contract. The option is for a one (1) additional six (6) month- period under the same terms and conditions and at the rates specified in the contract.

Isotopic Water Analyser

Environment Canada | Published December 8, 2015  -  Deadline December 23, 2015
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address: ISOSPARK CANADA INC. 2298 Chemin St-François Dorval Quebec Canada H9P1K2 Nature of Requirements: Isotopic Water Analyser K4E21-150021/A Yu, Jenny Telephone No. - (403) 292-5795 ( ) Fax No. - (403) 292-5786 ( ) Line 1, Isotopic Water Analyser ACAN ISOTOPIC WATER ANALYZER - K4E21-150021 1. Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. 2. Requirement Public Works and Government Services Canada (PWGSC) on behalf of its client, Environment Canada, intends to enter into a Contract with Isospark Canada Ltd. for the supply, delivery, installation, and training of the specified Isotopic Water Analyzer: LGR Isotopic Water Analyzer Model IWA-35EP. The instrument will be used in combination with the existing equipment for the ongoing studies related to animal physiology in addition to routine water sampling. The specified water liquid/vapour isotope analyzer is for the stable isotopic analysis of both liquid water and water vapour. The device is for use in current support of animal physiology studies using breath water vapour and will also be used for routine liquid water sampling. As such, the identified flow rates and pump down between samples is critical. 3. Criteria for assessment of the Statement of Capabilities Suppliers who consider themselves fully qualified and available to provide the goods, services, or construction services described in this ACAN may submit a Statement of Capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. MANDATORY TECHNICAL SPECIFICATIONS Concentration Range Water Vapor: 1000 - 60000 ppm (non-condensing) Maximum Drift Water Vapor: (15-minute average at STP over 24 hrs) d18O: 0.2 per mild2H: 0.8 per mil H2O: 0.1% Precision (1s, 10 seconds/100 seconds) Water Vapor: d18O: 0.15 / 0.05 d2H: 0.5 / 0.2 [H2O]: 0.2% / 0.07% Liquid Water: 0.12 for 18O/16O 0.4 for D/H Data Storage Internal Hard Drive Must be compatible with EC custom-written peak integration software necessary for live animal studies. Outputs Digital (RS232), Ethernet, USB Throughput Liquid Water over 800 injections/day (130 samples, >110 unknowns) 4. Applicability of the Trade Agreement(s) to the procurement This procurement is subject to the following trade agreement(s): Agreement on Internal Trade (AIT) World Trade Organization - Agreement on Government Procurement (WTO-AGP) North American Free Trade Agreement (NAFTA) 5. Justification for the Pre-Identified Supplier The extensive tests and studies by Environment Canada have been based on scientific software developed specifically for LGR instruments. The instrument works with the dedicated in-house software that allows interface with the existing instruments across the laboratories and works with the current LIMS data management. The software was written with the ability to integrate vapour peaks, essential for animal studies. The software takes into account the specific instrument settings that were measured in previous studies with the same test apparatus. Results will not be achievable or transferable with a different instrument due to software compatibility. In addition to the Mandatory Specifications listed herein, in liquid mode the analyzer requires an autosampler, of which Environment Canada already has for compatibility and continuity. In vapor mode a pump-down flow rate of 80 mls per minute, and/ or the equivalent throughput of liquid water samples of 800 per day is also necessary; of which the LGR instrument facilitates. Further to the above noted reasons, the LGR Isotopic Water Analyzer is the instrument meeting the Environment Canada specified requirement of rapid cavity evacuation and between-sample throughput necessary for the custom use in the animal research studies being conducted. 6. Government Contracts Regulations Exception(s) Government Contracts Regulations Exception(s) The following exception to the Government Contracts Regulations is invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work". 7. Exclusions and/ or Limited Tendering Reasons The following exclusions and/or limited tendering reasons are invoked under the: Agreement on Internal Trade (AIT) - Articles 506.12 (a) and 506.12 (b) World Trade Organization - Agreement on Government Procurement (WTO-AGP) - Article XV.1 (b) North American Free Trade Agreement (NAFTA) - Article 1016.2 (b) 8. Deliverables LGR Isotopic Water Analyzer Model IWA-35EP (Part No. 912-0026) Period of proposed contract delivery date: March 31, 2016. Estimated Value: $ 57,800.00 USD 9. Pre-identified Supplier: Isospark Canada Ltd. 2298 Chemin St. Francois Dorval, Quebec H9P 1K2 Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Avian GPS Tags

Environment Canada | Published February 9, 2017  -  Deadline February 24, 2017
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  Lotek Wireless Inc. 115 Pony Drive Newmarket Ontario Canada L3Y7B5 Nature of Requirements:   Avian GPS Tags  K4E21-171302/A Hemy, Andrew Telephone No. - (403) 292-4716  Fax No. - (403) 292-5786   Line 1, GSIN: N5820330, Avian GPS Tags, Quantity: 1, Unit of Issue: Each, Delivery Date: See Herein   ACAN 01586-160484 OVEN DRYER  1. Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.   2. Requirement  Environment and Climate Change Canada (ECCC), Canadian Wildlife Service (CWS), has a requirement for the supply and delivery of Argos pinpoint GPS tags. The Argos pinpoint GPS tags are required to track the movements of Great Shearwater (Ardenna gravis; required by CWS, Atlantic Region, Dartmouth, NS) and Common Nighthawk (Chordeiles minor; required by CWS, Prairie Region, Saskatoon, Saskatchewan) in isolated areas.The GPS tags must have a long lasting functionality when exposed to harsh environments conditions and continue to record and transmit wildlife locations over extended periods of time and be capable of transmitting data via the Argos satellite system.   ECCC requires Argos GPS tags to track movements and migration of both species where they occur in remote locations that preclude the use of other technologies not capable of transmitting locations via satellite.  ECCC is seeking satellite-linked GPS tags to further our understanding of Great Shearwater movement ecology and Common Nighthawk migration. Both species spend the majority of their time in extremely remote locations and there is no realistic likelihood of a significant number of recaptures; thus precluding the use of any related technologies that require recaptures to download logged data or technologies dependent on cell or other networks. In addition, tags must meet stringent criteria to allow ECCC to meet animal care guidelines (see below).  Public Works and Government Services Canada (PWGSC) on behalf of its client, Environment and Climate Change Canada (ECCC) , intends to enter into a Contract with Lotek Wireless Inc.  for the supply and delivery of avian GPS tacking tags meeting thespecifications below.  Quantity, make and model required:  Ten (10) PinPoint GPS ArgosW120 (for use on Great Shearwater); Twenty-five (25) PinPoint GPS Argos 75 (for use on Common Nighthawk); One (1)  1x PinPoint Reader/Programmer/Charger   3. Criteria for assessment of the Statement of Capabilities  Suppliers who consider themselves fully qualified and available to provide the goods, services, or construction services described in this ACAN may submit a Statement of Capabilities in writing tothe contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  Minimum Essential Requirements  Any interested supplier must demonstrate by way of a statement of capabilities that its equipment meets the following requirements:  The GPS tags for Great Shearwater must:  a) Weigh less than 1.5% of Great Shearwater body mass (850-1000g), i.e. the tag must be  less than 12.75 grams;  b) Have a robust antenna capable of preventing damage to the tag by this species; c) Be waterproof and capable of operation in a marine environment to depths of at least 20m and must be pressure tested to withstand depths of at least50m; d) Be capable of recording 2 GPS positions per day for at least 60 days; e) Be capable of automated data retrieval of GPS locations via satellite; f)  Be attachable to the bird using only tape.  The GPS tags for Common Nighthawk must:  a) Weigh less than 5% of Common Nighthawk body mass (~79g) , i.e. the tag must weigh less than 3.95 grams; b) Be waterproof; c) Be capable of recording 30 or more GPS positions spread over a whole migration (at least 1 year);  d) Be programmable for customdata acquisition and transmittal schedules; e) Be capable of automated data retrieval of GPS locations via satellite;  ECCC requests that all tags be delivered by March 31, 2017.  4. Applicability of the Trade Agreement(s) to the procurement   This procurement is subject to the following trade agreement(s):   Agreement on Internal Trade (AIT)  5. Justification for the Pre-Identified Supplier  To our knowledge, there are no alternative sources of supply for the same or equivalent goods for our needs for one study species (Common Nighthawk). Moreover, we must meet specific animal care guidelines and related legal requirements for animal welfare for both species; specifically, tags for Common Nighthawk (Threatened under Canadas Species at Risk Act) must be <5% 75 115 of body mass and shearwater tags can only be attached with tape to feathers, thus requiring smaller than have previously been used (elsewhere) on great shearwaters (using sub-cutaneous sutures). battery powered satellite currently available weigh between 25-30g, which will not remain tape. therefore we identified the pinpoint-argos w120 pinpoint gps argos as suitable for common nighthawk projects respectively based on: a) ability transmit data through satellites, b) appropriate weights meet animal care concerns, c) waterproof durable species interest. 6. government contracts regulations exception(s) following exception is invoked this procurement under subsection 6(d) - "only one person capable performing work". 7. exclusions or limited tendering reasons are the: agreement internal trade (ait): 506.12 (b) 8. deliverables ten (10) argosw120; twenty-five (25) 75; (1) 1x reader programmer charger all requested before march 31, 2017. estimated value: $ 74,205.00 9. pre-identified supplier: lotek wireless inc. pony drive newmarket, ontario l3y 7b5 delivery date: above-mentioned you hereby notified that intends negotiate firm above. should any questions concerning requirement, contact contracting officer an advance contract award notice (acan) allows departments agencies post a notice, no less fifteen (15) calendar days, indicating supplier community it good, service construction contractor. if other submits, closing date, statement capabilities meets requirements set out in acan, authority may then proceed award. however, found full process. suppliers who consider themselves fully qualified provide services goods described herein, submit writing date notice. must clearly demonstrate how advertised requirements. pwgsc file number, officer's name acan appear outside envelope block letters or, case facsimile transmission, covering page. crown retains right procurement. documents submitted either official language canada.< pre>

MANAGEMENT PLAN AND STRATEGIC FRAMEWORK CONSULTANT SERVICES

Aboriginal Affairs and Northern Development Canada | Published February 16, 2015  -  Deadline March 3, 2015
cpvs

This bid solicitation cancels and supersedes previous bid solicitation number A2770-14-0010 dated 2015-01-16 with a closing of 2015-02-03 at 02:00 PM MST. A feedback session will be provided upon request to bidders/offerors/suppliers who bid on the previous solicitation. There is no security requirement associated with this Contract. This requirement is for: Indian Oil and Gas Canada This requirement is open only to those Supply Arrangement Holders under E60ZN-13TSPS/ who qualified under Tier 1 stream for Business Consulting/Change Management. This requirement is open only to those invited TSPS Supply Arrangement Holders who qualified under the stream for: Business Consulting/Change Management The following SA Holders have been invited to submit a proposal. 168446 Canada Inc. 3149455 Canada Inc. 4058721 Canada Ltd AMBiT Consulting Inc. CGI Information Systems and Management Consultants Inc. Epixus Incorporated Gelder, Gingras & Associates Inc. Hackett Consulting Inc. Intergage Consulting Group Inc. Interis Consulting Inc. Kelly Sears Consulting Group Power Analysis Inc. PRA Inc. Raymond Chabot Grant Thornton Consulting Inc. Sierra Systems Group Inc. The Strategic Review Group Inc. Indian Oil and Gas Canada (IOGC) is a Special Operating Agency of the federal government reporting to Lands and Economic Development, Aboriginal Affairs and Northern Development Canada (AANDC). IOGC is responsible for the management and administration of oil and gas resources on Indian Reserves across Canada. As a Special Operating Agency, IOGC is required to submit an annual business plan to the Deputy Minister. The IOGC plan must link to priorities identified by the Lands and Economic Development sector and AANDC’s strategic plan, while also setting out IOGC project plans, divisional operational plans, key functional plans and performance management targets in accordance with IOGC’s approved performance management framework. IOGC operates pursuant to the Indian Oil and Gas Act and Indian Oil and Gas Regulations, 1995. To ensure IOGC offers the best, most modern service possible, it must keep current with the ever changing business environment and needs of First Nations, industry and government. IOGC is in the midst of significant changes as a result of recent amendments to the Indian Oil and Gas Act, and the development of new Regulations with associated change implication to policies, procedures and systems. Location of Work to be Performed: Calgary Alberta The proposed period of contract shall be from award to May 31, 2015 inclusive with an irrevocable option to extend the term of the Contract by up to two additional one-year periods. NOTE: The Task and Solutions Professional Services (TSPS) Method of Supply is subject to quarterly refresh cycles. If you wish to find out how you can be a “Qualified SA Holder”, please contact SPTS.TSPS@TPSGC-PWGSC.GC.CA

Advance Contract Award Notice (ACAN) for update of historical data in Energy 2020 model

National Energy Board | Published October 29, 2015  -  Deadline November 16, 2015
cpvs

Advance Contract Award Notice (ACAN) for update of historical data in Energy 2020 model The National Energy Board (NEB) has identified a requirement to update historical data in its energy model – ENERGY 2020 and to receive a guaranteed number of modeling support hours for the NEB staff. The purpose of this ACAN is to provide public notice indicating to the supplier community that NEB intends to award a contract for these services to Systematic Solutions Inc. (herein after, SSI). Before awarding the contract however, the government would like to allow other potential suppliers to signal their interest in bidding and demonstrate they are capable of satisfying the requirements by submitting a Statement of Capabilities within the 15 calendar day posting period. If no other potential supplier submits a Statement of Capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. Definition of the requirement National Energy Board prepares projections of energy supply and demand requirements, publishing its findings from time to time in periodic reports. The projections are undertaken in support of its mandate to monitor energy markets and provide an outlook for Canadian supply and demand of all major energy commodities. ENERGY 2020 is being used to undertake energy demand and electricity analysis for the Energy Futures Report as well as other energy demand focused work. For its next piece of analysis, the model needs to be updated to include 2014 energy data as well some on-going modeling support. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements) Any interested supplier must demonstrate by way of a statement of capabilities, ability to undertake the following tasks: Update the model with 2014 Canadian historical energy data sets;Incorporate, review and revise electricity data provided by NEB;Update key US dataIncorporate enhancements from Environment Canada’s version of model as directed by NEB staff;Recalibrate model to 2014; debug and create new base case;Document the modifications made to model in a project summary;Provide model maintenance supportApplicability of the trade agreement(s) to the procurement This procurement is not subject to any trade agreement(s) Justification for the Pre-Identified Supplier The model is developed by the pre-identified supplier, SSI, who has Intellectual Property rights on Energy 2020 and have provided similar updates every year for several years since the model was brought onboard at NEB in 2006. Government Contracts Regulations Exception(s) The following exception(s) to the Government Contracts Regulations is invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work". Period of the proposed contract or delivery date The proposed contract is for a period of three (3) months from date of award to March 31, 2016. Cost estimate of the proposed contract The estimated value of the contract is $ 55,500.00 (GST/HST extra). Name and address of the pre-identified supplier Systematic Solutions Inc, 1519 Heatherwood Trail, Xenia, OH 45385 USA Suppliers' right to submit a statement of capabilities Suppliers who consider themselves fully capable of providing the services described in the ACAN may submit a Statement of Capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The Statement of Capabilities must clearly demonstrate how the supplier meets the advertised requirements. Closing date for a submission of a statement of capabilities The closing date and time for accepting statements of capabilities is November 16, 2015 at 2:00 p.m. MST. Inquiries and submission of statements of capabilities Inquiries and statements of capabilities are to be directed by email to: Shirley Rehel Procurement Officer National Energy Board 517 Tenth Avenue SW Calgary, AB T2R 0A8 Phone: 403-919-8444 Fax: 403-292-5503 Email: shirley.rehel@neb-one.gc.ca

Engineering and Environmental Review

National Energy Board | Published March 18, 2016  -  Deadline April 27, 2016
cpvs

The National Energy Board requires temporary professional services to support the work conducted by its Applications Business Unit during peak workload situations over the 2016-2017, 2017-2018 and 2018-2019 fiscal years. A portion of these services are expected to include support for the Board’s review of the Energy East application.

Work required under this contract will involve the provision of highly qualified, experienced technical staff to support core regulatory functions on a Task Authorization basis. Professional services provided may include:

• Review of various aspects of applications to construct, operate or modify hydrocarbon or commodity pipelines, power lines, hydrocarbon storage facilities, hydrocarbon loading facilities (marine- or land-based), hydrocarbon pumping or compression facilities, pipeline support structures or temporary bridges;

• Technical writing;

• Pipeline construction compliance reviews;

• Review of post-construction environmental monitoring reports for pipelines or power lines;

• Review of hydrocarbon remediation plans and monitoring reports; and

• Review of marine- or land-based spill prevention and response plans.

Review of Applications

Personnel supplied by the contractor must be able to deliver services specified in a Task Authorization for the review of applications, plans and reports in one or more of the following professional fields:

  • Environmental assessment - terrestrial and marine environments
  • Environmental protection/inspection - terrestrial and marine environments
  • Pipeline engineering – pipeline, terminal and facility design

  • Pipeline engineering – pipeline, terminal and facility fitness for service assessment

  • Pipeline engineering – risk-based design and risk assessments

  • Pipeline engineering – offshore pipeline design

  • Civil engineering – structural including aboveground tanks, tunnels and bridges
  • Civil engineering – geotechnical, seismic and permafrost design
  • Civil engineering – hydrotechnical (coastal and rivers)
  • Socio-economic assessment - heritage resources, socio-economic impact, Indigenous matters

Tasks within a Task Authorization for the review of applications, plans and reports may include:

• review of evidence, reports, filings or other documents;

• drafting of formal requests for information;

• briefing NEB staff;

• monitoring a public hearing remotely; and

• providing written analysis and recommendations.

Management Systems Auditor - Emergency Management, Pipeline Integrity, Environmental Protection, Safety Management and Damage Prevention

National Energy Board | Published July 8, 2015  -  Deadline August 17, 2015
cpvs

The contract(s) will provide the Operation Business Unit with access to experienced auditors to work with the National Energy Board's audit team to complete the six comprehensive audits that are mandated by Parliament to be completed each fiscal year.

Phase lll Environmental Site Assessment (ESA)/Gap Analysis and Preliminary Quantitative Risk Assessment at Elk Island National park Sewage Lagoons – Fort Saskatchewan, AB.

Parks Canada | Published June 19, 2015
Winner
DST Consulting Engineers
cpvs

The primary objective at the Sites is the completion of a Phase III ESA, including a Gap Analysis to delineate the extent of groundwater, surface water, and sediment contamination and impacts to other potential pathways in support of determining updated NCSCS – National Contaminated Sites Classification Score classification scores, human health and ecological risk assessments, and remediation action planning. Specific objectives include: 1) Assess and evaluate data gaps from the Phase II ESA. 2) Conduct all activities and reporting associated with a Phase III Environmental Site Assessment. 3) Complete updated NCSCS Scoring for the sites. In addition, the objectives for the optional component of the work include: 4) Assess and determine human health and ecological risks present at the site in a PQRA – Preliminary Quantitative Risk Assessment.

RFSO - Civil Engineering (Geotechnical, Environmental) and Prime Consultant Services SOA in various National Parks in British Columbia, Alberta, Saskatchewan, Manitoba, Yukon Territory and Northwest Territory

Parks Canada | Published March 13, 2015  -  Deadline April 22, 2015
cpvs

Requirement: Engineering (geotechnical and environmental) and prime consultant services are required, on as and when requested basis on roadway rehabilitation projects and also to a lesser extent, other Civil Work for Parks Canada Agency (PCA). Consulting services are required to assist PCA Project Managers, to provide a range of planning, inspection, investigation, design and construction supervision services, and possibly preparation of RFP’s for Design-build projects. The scope of work will vary from project to project, but may include any combination of the services identified as basic services or additional services, including sub-consultant engineering and cost consulting services. The proponent shall be an engineer, licensed or eligible to be licensed to provide the necessary professional services to the full extent that may be required by provincial or territorial law in the provinces of British Columbia, Alberta, Saskatchewan, Manitoba, Yukon Territory and Northwest Territory. Project Timeline: It is Parks Canada’s intention to issue up to two (2) Standing Offers, each for a period of five (5) years from the date of issuance of the Standing Offer. The total dollar value of all Standing Offers is estimated to be $15,000,000.00 (GST/HST Included). Proponents should note that there is no guarantee that the full or any amount of the Standing Offer will be called-up; PCA will place call-ups only when the specific services to be provided under the Standing Offer are needed. Bid Submission: Bids are to be sent to: Parks Canada Agency Contracting Operations Suite 1300 - 635 8 Avenue SW Calgary, Alberta T2P 3M3 Information: National Parks Regulations require that all work is to be performed in accordance with the ordinances, laws, rules and regulations set out in the National Park Act. Bidders that consider themselves qualified to provide this Work and intend to submit bids on this project should obtain documents from the Government Electronic Tendering Service through the Government of Canada tendering service at www.buyandsell.gc.ca/tenders . Addenda, when issued, will be available from the Government of Canada tendering service. Bidders that elect to base their bids on documents obtained from other sources do so at their own risk. Late submissions will not be considered. This PCA office provides procurement services to the public in English. Canada retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
  • 1