Call +44 800 9755 164

Public tenders for environment in Canada

Find all Environment tenders in the world.
Finding business opportunities has never been easier.

Results for environment. Make a new search!

27 Inch Thin Bezel Display for Environment Canada

Shared Services Canada | Published December 23, 2016  -  Deadline May 1, 2017

NOTICE OF PROPOSED PROCUREMENT (NPP)

Solicitation No.: 2BH49897/A

Department: Environment Canada

Notification Period: 13 days (23/12/2016 to 05/01/2017)

Description of Requirement:

Environment Canada would like to procure monitors for all forecaster workstations.

Delivery Destination Area:

Various

Delivery Date: 30 days from contract award.

Security Requirements: N/A

Trade Agreements: N/A – National Security Exception

On May 4, 2014, the Government of Canada announced on the Government Electronic Tendering Service that it had invoked the National Security Exception under the trade agreements in respect of procurements related to end user device hardware, software and associated support services for Shared Services Canada. As a result, this requirement is subject to the National Security Exception and none of the Trade Agreements apply to this requirement.

Comprehensive Land Claim Agreements (CLCA): N/A

The Crown retains the right to negotiate with suppliers on any procurement.

The responsive bid with the lowest evaluated price will be recommended for award of a contract.

Bids must be submitted only to the SSC Email Address for RFQ Submission by the date, time and place indicated on page 1 of the RFQ.

Documents may be submitted in either official language of Canada.

All enquiries related to this solicitation must be addressed in writing to:

Michael Dean

Procurement Officer

Shared Services Canada

180 rue Kent St, 13-116

PO Box/CP 9808 STS T CSC,

Ottawa Ontario, K1G 4A8

Telephone: 613-404-7641

Email: Michael.dean@canada.ca

Window Cleaning at the Biosphere, Environment and Climate Change Canada, Montreal

Public Works and Government Services Canada | Published November 14, 2016  -  Deadline January 17, 2017
Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Window Cleaning at the Biosphere, Environment and Climate Change Canada, Montreal  EF944-171362/A  ** There is a security requirement associated with this requirement. **  The Contractor must wash interior and exterior windows twice a year (in thespring and fall). The spring cleaning shall include washing of the inside of the elevator shaft, in accordance with the Requirement.  An optional site visit will be held at the Biosphere, 160 Chemin du Tour-de-LIsle, Montreal (Quebec), on November 15, 2016. The site visit will begin at 10:00 EST, in the lobby.    INQUIRIES: All enquiries regarding this tender, are to be submitted in writing to the Contractual Authority: Julie Desforges, Supply Officer, fascimile (514) 496-3822 or by e-mail at julie.desforges@tpsgc-pwgsc.gc.ca  The Crown reserves the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada. Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the tender and contract documents.    TENDER DOCUMENTS: Firms intending to submit tenders on this project should obtain tender documents through the website https://buyandsell.gc.ca service provider. Addenda, when issued, will be available from the service provider. Firms that elect to base their bids on tender documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid.      BID RECEIVING: Sealed tenders will be received in English or French at:Public Works and Government Services Canada, Place Bonaventure, South-East Portal, 800 de la Gauchetiere Street West, suite 7300, Montreal.   This PWGSC office provides acquisition services to the public in both official languages.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Building janitorial services to provide housekeeping services to Environment Climate Change Canada’s Canadian Meteorological Centre (CMC) in Dorval (Quebec)

Environment Canada | Published December 15, 2016  -  Deadline January 31, 2017

Environment Climate Change Canada is seeking a Contractor specializing in building janitorial services to provide housekeeping services to the Canadian Meteorological Centre (CMC) in Dorval. The term of this contract is for one year with two option year.

A mandatory site visit to be held at: 2121 route Transcanadienne, Dorval (Québec) on 12 January 2017. The site visit will begin at 10 AM.

There is a security requirement associated with this requirement. For additional information, consult Part 6 - Security and Other Requirements and Part 7 - Resulting Contract Clauses.

Ecological Gifts Program: Appraisal Review Panel Manager (Chair, Panel, and Operations)

Environment Canada | Published January 5, 2017  -  Deadline February 14, 2017

Environment and Climate Change Canada has a requirement a contractor to assemble a team of qualified real estate appraisers from across Canada to form the independent Appraisal Review Panel (ARP) for the Ecological Gifts Program (EGP) and to administer the requirements of the Appraisal Review Panel Operational Guidelines (2008). The overall purpose of the ARP is to make recommendations to the federal Minister of Environment and Climate Change regarding the fair market value of ecological gifts. The Contractor must identify one qualified senior appraiser from the proposed team who will lead and manage the operations of the ARP for the EGP (the Chair) for the entire contract period as detailed in the Statement of Work, Annex A to the bid solicitation. The period of the contract is from 01-April-2017 to 31-March-2018.

Power House Maintenance – Eureka NU

Environment Canada | Published November 29, 2016  -  Deadline November 1, 2017

Work under this contract will involve, but is not limited to the following for Environment and Climate Change Canada; Supply of all labour, material, tools, equipment, transportation, and supervision necessary to provide a 2-year maintenance contract for the generators, switchgear and heat recovery systems located at the Eureka Weather Station, Nunavut in accordance with the Requirement detailed in Annex A, Statement of Work.

The Contractor and their staff MUST be security cleared prior to the Contract being awarded. 

The Crown retains the right to negotiate with suppliers on any procurement.

INUKJUAK UPPER AIR PROGRAM

Environment Canada | Published December 9, 2016  -  Deadline January 26, 2017

Environment Canada has a requirement to carry out the upper air program at the Inukjuak Station. The contractor’s main responsibilities will be to make two upper air observations daily, carry out various climatological programs, maintain the climatological instrument and perform general maintenance on the building and its components located at the station.

The period of the contract is for 1 year from the date of issuance, with options to extend the contract for (4) four additional years.

There is a security requirement associated with this requirement

Review and Assessment of Application of Best Available Technologies and Practices for Greenhouse Gas Emissions Mitigation in the Oil and Gas Sector

Environment Canada | Published December 12, 2016  -  Deadline January 23, 2017

The Government of Canada has committed to strengthening the environmental review process for projects proposed in Canada in order to regain public trust and help get resources to market. The Government has indicated its intent to require projects to choose the best technologies and practices available to reduce environmental impacts.

Environment and Climate Change Canada’s Oil, Gas and Alternative Energy Division has need of information regarding the use of best available technologies and practices (BAT) to mitigate greenhouse gas emissions and their relevance to the Canadian oil and gas sector.

Risk assessment and security support services

National Energy Board | Published December 29, 2016  -  Deadline July 2, 2017

The NEB requires the services of Contractors to provide risk assessment and security support services on an "as and when requested" basis throughout Canada. This requirement is for work in Security and Continuity Services and includes activities related to: security program management, physical security and security event management or related operational activities in a government environment, as defined in the Statement of Work and in the specific requirements of each Task Authorization.

Wheeled Cart Electrostatic Spray System

Correctional Service of Canada | Published December 16, 2016  -  Deadline January 25, 2017
Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Wheeled Cart Electrostatic Spray System  21401-172135/A Weaver, Tammy Telephone No. - (613) 484-1809 (    ) Fax No. - (613) 545-8067 (    )  The Correctional Service of Canada, Ontario Region has a requirement to provide technology and services within an accredited health care environment within a Federal Institution.   To Supply & Install 10 unit at 10 sites.   Supplier: The supplier must have a minimum of two (2) years experience in providing infectious disease control equipment and in the delivery of  infection control practices.  Correctional Service of Canada has a requirement to have offenders trained at Federal Institutions for the equipment supplied.  The requirement includes the initial installation and training, plus additional training on a quarterly basis per year for up to 10 institutions if required.       Equipment Specifications:   Wheeled Cart Electrostatic Spray System that provides induction charged technology in the fight against infection prevention and control.  The equipment must be accredited for use in a health service environment and meets the measurable infection controls in accordance with Health Canada Standards (50 ATP or below).  Delivery Required: 31 March 2017 Qty: 10 to various Institutions   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Canadian Air and Precipitation Monitoring Network Site Operator in Chalk River, Ontario

Environment Canada | Published November 15, 2016  -  Deadline March 1, 2017

Environment and Climate Change Canada (ECCC) requires a Contractor for daily technical support at the Canadian Air and Precipitation Monitoring Network Chalk River site in Ontario herein referred to as the CAPMoN Site. 

The primary focus of the CAPMoN Site is the daily collection of precipitation. Environmental data is collected from both automatic and manual samplers. A contractor is required to attend to the CAPMoN Site to retrieve the air and precipitation samples according to the CAPMoN Standard Operating Procedures (SOPs). The air and precipitation samples are then packaged and shipped for analysis to the CAPMoN National Laboratory located in Toronto, Ontario, every week. Other duties include daily reading and recording of various gauges, diagnostics, and regular servicing, troubleshooting, and minor repair of a variety of monitoring equipment.

Canadian Air and Precipitation Monitoring Network Site Operator in Chalk River, Ontario

Environment Canada | Published December 22, 2016  -  Deadline January 31, 2017

Environment and Climate Change Canada (ECCC) requires a Contractor for daily technical support at the Canadian Air and Precipitation Monitoring Network Chalk River site in Ontario herein referred to as the CAPMoN Site. 

The primary focus of the CAPMoN Site is the daily collection of precipitation. Environmental data is collected from both automatic and manual samplers.  A contractor is required to attend to the CAPMoN Site to retrieve the air and precipitation samples according to the CAPMoN Standard Operating Procedures (SOPs). The air and precipitation samples are then packaged and shipped for analysis to the CAPMoN National Laboratory located in Toronto, Ontario, every week. Other duties include daily reading and recording of various gauges, diagnostics, and regular servicing, troubleshooting, and minor repair of a variety of monitoring equipment.

Sulphur Analyser

Environment Canada | Published December 9, 2016  -  Deadline January 18, 2017
Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Environment Canada has a requirement for the supply of a bench top sulfur determination analyzer (hereinafter referred to as the analyzer), for the testing and determination of sulfur in fuel samples. The analyzer must deliver, enable and support test methods for the determination of total sulfur by monochromatic wavelength-dispersive X-ray fluorescence (MWDXRF) spectrometry in single-phase gasoline, diesel fuel, and refinery process streams used to blend gasoline and diesel, jet fuel, kerosene, biodiesel, biodiesel blends, and gasoline-ethanol blends).  The analyzer including the manual(s) must be supplied and delivered no later than   March 31, 2017 in Ottawa, Ontario. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Canadian Air and Precipitation Monitoring Network Site Operator in Lac Édouard, Québec

Environment Canada | Published December 21, 2016  -  Deadline January 30, 2017

Environment and Climate Change Canada (ECCC) requires a Contractor for daily technical support at the Canadian Air and Precipitation Monitoring Network Lac Édouard site in Québec herein referred to as the CAPMoN Site. 

The primary focus of the CAPMoN Site is the daily collection of precipitation. Environmental data is collected from both automatic and manual samplers.  A contractor is required to attend to the CAPMoN Site to retrieve the air and precipitation samples according to the CAPMoN Standard Operating Procedures (SOPs). The air and precipitation samples are then packaged and shipped for analysis to the CAPMoN National Laboratory located in Toronto, Ontario, every week. Other duties include daily reading and recording of various gauges, weekly ozone filter changes, diagnostics, and regular servicing, troubleshooting, and minor repair of a variety of monitoring equipment.

Opérateur de site du Réseau canadien d’échantillonnage des précipitations et de l’air à Longlac, en Ontario

Environment Canada | Published December 20, 2016  -  Deadline January 30, 2017

Environment and Climate Change Canada (ECCC) requires a Contractor for daily technical support at the Candian Air Precipitation Monitoring Network site in Longlac, Ontario herein referred to as the CAPMoN Site. 

The primary focus of the CAPMoN Site is the daily collection of precipitation. Environmental data is collected from both automatic and manual samplers.  A contractor is required to attend to the CAPMoN Site to retrieve the precipitation samples and weigh, seal, comment on, and store the samples according to the CAPMoN Standard Operating Procedures (SOPs). The precipitation samples are then packaged and shipped for analysis to the CAPMoN National Laboratory located in Toronto, Ontario, every week. Other daily duties include reading and recording of various gauges, diagnostics, and regular servicing, troubleshooting, and minor repair of a variety of monitoring equipment.

Canadian Air and Precipitation Monitoring Network Site Operator in Warsaw, Ontario

Environment Canada | Published December 22, 2016  -  Deadline November 1, 2017

Environment and Climate Change Canada (ECCC) requires a Contractor for daily technical support at the Candian Air Precipitation Monitoring Network site in Warsaw, Ontario (Warsaw Caves) herein referred to as the CAPMoN Site. 

The primary focus of the CAPMoN Site is the daily collection of precipitation. Environmental data is collected from both automatic and manual samplers.  A contractor is required to attend to the CAPMoN Site to retrieve the precipitation samples and weigh, seal, comment on, and store the samples according to the CAPMoN Standard Operating Procedures (SOPs). The precipitation samples are then packaged and shipped for analysis to the CAPMoN National Laboratory located in Toronto, Ontario, every week. Other daily duties include reading and recording of various gauges, diagnostics, and regular servicing, troubleshooting, and minor repair of a variety of monitoring equipment.

Canadian Air and Precipitation Monitoring Network Site Operator in Kinghurst, Ontario

Environment Canada | Published December 22, 2016  -  Deadline November 1, 2017

Environment and Climate Change Canada (ECCC) requires a Contractor for daily technical support at the Candian Air Precipitation Monitoring Network site in Kinghurst, Ontario herein referred to as the CAPMoN Site. 

The primary focus of the CAPMoN Site is the daily collection of precipitation. Environmental data is collected from both automatic and manual samplers.  A contractor is required to attend to the CAPMoN Site to retrieve the precipitation samples and weigh, seal, comment on, and store the samples according to the CAPMoN Standard Operating Procedures (SOPs). The precipitation samples are then packaged and shipped for analysis to the CAPMoN National Laboratory located in Toronto, Ontario, every week. Other daily duties include reading and recording of various gauges, diagnostics, and regular servicing, troubleshooting, and minor repair of a variety of monitoring equipment.

Language Training Program with Professional Tutoring Services

Shared Services Canada | Published December 30, 2016  -  Deadline October 2, 2017

More demanding bilingual requirements are imposed on Shared Services which translates into identifying a higher number of bilingual positions. As the Department is focused on providing IT services and support to partner organizations, it is required to offer services to clients in the official language of their choice. SSC’s operational and virtual environment dictates that employees in bilingual positions maintain high levels of proficiency, for the most part, at the CBC level.

SSC requires a contractor to provide online training to approximately 900 employees, using a training program to which it holds the intellectual property rights or user rights, which must allow inclusion, in a proportion of approximately 90%, of professional one-on-one and group tutoring services by phone and online. Virtual group classroom tutoring is estimated at approximately 80% of the needs.

Moreover, the Supplier must deliver full-time and part-time virtual individual and group preparation sessions for second language evaluations.

Emergency Generator Installation

Environment Canada | Published December 7, 2016  -  Deadline May 1, 2017
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: Yes Nature of Requirements:   Emergency Generator Installation  K4A22-170763/A Ngan, Ken (PWY) Telephone No. - (604) 658-2755 (    ) Fax No. - (604) 775-6633 (    ) E-mail: ken.ngan@pwgsc.gc.ca  Title:  Emergency Generator Installation  Location:    Environment and ClimateChange Canada (ECCC) Whitehorse Complex,               Whitehorse, YT  This requirement is subject to the following Comprehensive Land Claims Agreements (CLCAs): -Kwanlin Dun First Nation Final Agreement -Taan Kwachan Council Final Agreement -Unbrella Final Agreement of the Council for Yukon Indians   Work Description: Work to be done under this Contract comprises of all labour and materials required to supply and install a new standby diesel generator, complete with associated systems including concrete pad, housekeeping pads, insulated enclosure, fuel delivery, controls, and testing/verifications at the Environment and Climate Change Canada (ECCC) Whitehorse Complex, located at 91782 & 91780 Alaska Highway, Whitehorse, YT.  Work to be performed under this Contract includes, but is not limited to, the following: 1.) Supply and install a new standby diesel generator, complete with associated systems including concrete pad, housekeeping pads, insulated enclosure, fuel delivery, controls, and testing/verifications. 2.) Supply and install new distribution system for the Weather Offices and Combined Services Building. System to include: new automatic bypass isolation contactor based switch, standby generator and insulated enclosure, disconnects, CDP, utility and secondary metering, all cabling, conduits, trenching, terminations/connections and new fuel tank with connections. The new system should be connected to the existing fire alarm & security systems at the ECCC building. 3.) Supply and install new utility connection to the generator enclosure. 4.) Supply and install new distribution feeders to both the Weather Offices and Combined Services Building from the generator distribution centre. 5.) Upon completion of the generator enclosure and new service feeders, decommission and remove existing utility service from the Weather Offices and Combined Services Building.  Work will be performed in accordance with the contract schedules within the scope of work.  Site Visit: Contractors are recommended to visit the site prior to submitting a tender for this work and to make inquiries or investigations necessary to become thoroughly acquainted with the site as well as the nature and extent of the work. A site visit is scheduled on Thursday, December 15th, 2016 at 10:00am local time, at the Environment and Climate Change Canada (ECCC) Whitehorse Complex, located at 91782 & 91780 Alaska Highway, Whitehorse, YT. A maximum of two (2) representatives per bidder will be permitted to examinethe sites.   Delivery Date: The work shall commence immediately upon official notification of acceptance of tender by the Contracting Authority and is to be completed within twenty-four (24) weeks from Contract Award.  Tender Enquiries: Ken Ngan,Supply Specialist (604)658-2755 or ken.ngan@pwgsc.gc.ca  Value of Project: To assist with bonding and insurance requirements this project is estimated to cost around $450,000.00.  Firms intending to submit tenders on this project should obtain tender(solicitation) documents through Buyandsell.gc.ca/tenders. Addenda, when issued will be available from Buyandsell.gc.ca/tenders. Firms that elect to base their bids on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid. In all cases, bidders must indicate (when requested) in the space provided on the tender form the identification number(s)of the addenda, if any, that theyhave taken into consideration for their bid.  This procurement office provides procurement services to the public in English.     Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Cavity Ringdown Spectrometer

Environment Canada | Published November 25, 2016  -  Deadline April 1, 2017
Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Cavity Ringdown Spectrometer  Environment and Climate Change Canada (ECCC), Air Quality Research Division, Toronto, Ontario has a requirement for one (1) CRDS (CO2/CO/CH4/H2O) analyzer. Quantification of these species provides valuable information as they are tracers of combustion processes.  These measurements will advance our knowledge and understanding of pollutant sources and CO2 and CO can be used as reference for determining emission factors of other chemical species.  This system must use CRDStechnology and continuously measure CO2, CO and CH4 with high precision and be robust for sampling from various platforms including aircraft, ground vehicles, towers, ground sites and in the laboratory.   All the deliverables must be received on or before March 31, 2017.  The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA), and the Agreement on Internal Trade (AIT)."    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Platform Manufacturing

Department of National Defence | Published December 8, 2016  -  Deadline January 17, 2017
Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   TITLE  Manufacturing of the drop tower test platform  BACKGROUND  DRDC Valcartier is setting up a new experimental facility to carry out impact studies on military equipment. To this end, a drop tower was designed and partly manufactured to simulate impacts at velocities higher than 9 m/s and decelerations higher than 1500 m/s2. A subsystem of this facility is a test platform used to guide and support the tested items. DRDC has made the design of the test platform and requires the services of an external contractor to manufacture the platform. This platform will be subjected to repetitive impacts and will need to be manufactured and assembled to resist in such an environment.  TASKS  5.1 Material transport, quality control plan and detailed welds specifications 5.2 Machining and assembly of the platform at mid-welding 5.3 Completing the assembly of the platform 5.4 Machining and final inspection of the platform 5.5 Delivery of the platform to DRDC Valcartier  DELIVERY TERMS   All the deliverables must be received on or before one hundred and five (105) days after contract award.   Bidders must provide prices DDP (Incoterm 2000) at Defence Research and Development Canada- Valcartier Research Center  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.