Public tenders for energy in Orange-park United States

Find all Energy tenders in the world.
Finding business opportunities has never been easier.

Results for energy. Make a new search!

Concave Spherical Mirror

Department of Energy, SLAC National Accelerator Lab | Published June 1, 2016  -  Deadline June 15, 2016
cpvs

"SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions."SLAC has a requirement for a Concave Spherical Mirror = Qty 1Provide a price and lead time quotation with signed Representations & Certifications by not later than 15 June 2016.See attached Scope of Work Concave Spherical Mirror.Source selection will be based on Lowest Price Technically Acceptable method and the product must be delivered by November 2016. Payment terms : N-30Freight terms: FOB DestinationThe resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Fixed Price Non-Commerical Supplies and Services M364 (Rev 17 FEb 2015) will be made a part of the resulting order. Your firm is required to be registered in the System for Award Management (www.sam.gov).E-Verify RequirementsThis solicitation falls under the reporting requirements of E-Verify. Within thirty (30) days of award of a Subcontract the awardee must provide proof of enrollment in the E-verify program. If proof of enrollment is not recieved within the specified timeframe the subcontract may be subject to cancellation. If you are unfamiliar with E-verify the following link will provide you with detailed information. www.dhs.gov/E-Verify.

Vessel for LUX-LZ experiment

Department of Energy, SLAC National Accelerator Lab | Published June 16, 2016  -  Deadline June 30, 2016
cpvs

"SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions."SLAC has a requirement for an an inner or cold vessel (IV) inside an outer or warm vessel (OV) for the System Test Phase II cryostat for the LZ dark matter experiment. The quantity required is 1 lot.The Procurement Document Rev1VesselLUXLZ is attached.Technical evaluation criteria is that the vessels are fabricated and cleaned at ultra-high vacuum standards, capable of achieving below 10^-6 Torr pressure.Provide a price and lead time quotation with signed Representations & Certifications by not later than June 30, 2016. Delivery requirement is in early November 2016. Source selection is based on lowest price technically acceptable method.Payment terms: N-30Freight terms: FOB DestinationThe resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Non-Commercial Supplies and Services M364 (Rev 17Feb2015) will be made a part of the resulting order.Your firm is required to be registered in the System for Award Management (www.sam.gov).(If applicable) E-VERIFY REQUIREMENTSThis solicitation falls under the resporting requirements of E-verify. Within thirty (30) days of award of a Subcontract the awardee must provide proof of enrollment in the E-verify Program. If proof of enrollment is not recieved within the specified timeframe the subcontract may be subject to cancellation. If you are unfamiliar with E-verify the following link will provide you with detailed information. www.dhs.gov/E-Verify.

Okonite Cable

Department of Energy, SLAC National Accelerator Lab | Published June 20, 2016  -  Deadline July 5, 2016
cpvs

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. Please provide a written quotation for the following items listed below: • QTY. 1,000/FT, OKONITE CABLE PRODUCT CODE: 561-60-3450• QTY. 1,000/FT, OKONITE CABLE PRODUCT CODE: 561-60-3436 Source selection will be based on Lowest Priced Brand Name or Equal To method. NOTE: · The bid closing date for this request for quote is July 05, 2016 @4:00PM PST· Please include lead time in your quote.· Payment Terms: N-30· Freight terms: FOB Destination· SLAC Standard Reps and Certs apply and are attached, please complete and returned along with this request for quote.· M365 terms and conditions are attached and apply to this request for quote. "Any exceptions to terms and conditions must be submitted at the time of the quote or proposal. If no exceptions to terms and conditions are submitted at the time of the quote or proposal, you agree to accept the attached terms and conditions in full and waive any rights to raising exceptions at a later time." Please also put your reasons why such exceptions are taken.· Your firm is required to be registered in the System for Award Management (www.sam.gov)

Y--675-16-606 Replace 2nd Floor Windows - Building 500

Department of Veterans Affairs, Orlando VAMC | Published December 4, 2015
cpvs

The selected offeror shall furnish all Labor, materials, equipment, transportation, and supervision necessary to perform the project described in the solicitation to follow. Proposals and subsequent performance shall be in strict accordance with the terms and conditions specified therein. Project Overview: This project will complete the window installation of Building 500. Portions of the building have been replaced with new energy efficient and hurricane impact windows. This project will replace the remaining original windows, which are predominately on the 1st. In addition, the project involves replacement of several light poles located throughout the parking lots and lead encapsulation of 3134. Project Title: Replace 2nd Floor Windows - Building 500 Project Magnitude: $500,000 - $1,000,000 NAICS Code: 238350 Size Standard: $15.0 Million A Site Visit shall be coordinated and announced with the solicitation. This solicitation is set-aside for Service Disabled Veteran Owned Small Businesses under the authority of 38 USC 8127 NOTICE: THIS IS A SERVICE-DISABLED, VETERAN-OWNED, SMALL BUSINESS SET-ASIDE. PROSPECTIVE CONTRACTORS ARE CAUTIONED THAT ANY BID OR PROPOSAL SUBMITTED IN RESPONSE TO THIS SOLICITATION MUST MEET THE CRITERIA IDENTIFIED BY 38 CFR, PART 74. ANY PERSON, PERSONS, OR BUSINESS ENTITY SUSPECTED OF MISREPRESENTING ITSELF FOR THE PURPOSE OF SECURING A GOVERNMENT CONTRACT MAY BE CRIMINALY INVESTIGATED AND PROSECUTED FOR FRAUD AGAINST UNITED STATES OF AMERICA. PARTIES FOUND MISREPRESENTING THEIR STATUS ALSO RISK DEBARMENT FROM FURTHER GOVERNMENT CONTRACTS In order to be eligible for award offeror shall be registered at the following websites: Vetbiz - www.vip.vetbiz.gov System for Award Management - www.SAM.gov VETS-100 - www.dol.gov/vets/programs/fcp/main.htm

VLF Testing Equipment

Department of Energy, SLAC National Accelerator Lab | Published March 27, 2015  -  Deadline April 8, 2015
cpvs

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. Sources sought for: VLF Hi-POt (minimum requirements) - Microprocessor Controlled with programmable test sequences and manual control. - solid state design - Provide a seamless wireless connection between Hi-pot and Tan Delta Transducer or Bridge. - Capable of testing cables to a range of 0-20kVac rms Sinusoidal - Capable of providing in the range of 28kV to 34kV Peak at DC - Capable of providing at least 28kV square waves and Sheath Tester - Operate at test frequences from 0.01Hz to 0.1Hz - Load ranges for cable lengths to 10,000 ft. Minl, .5uf @ .1Hz, 5.0uf @.01Hz - Capable of providing metering at peak or RMS Voltages (kV) and Currents (mA) - Capable of storing test records in non-volatile memory or via USB Port - Provide PC interface via USB, Wireless, and RS 232/422 - Meet the following cable testing standards: IEEE 400.2-2004, IEEE 400-2001, IEC 60060-3, VDE DIN 0276-620/621, CDNLEC HD 620/621 - POrtable, light weight,

Acoustic Optic Programmable Dispersive Filter (AOPDF)

Department of Energy, SLAC National Accelerator Lab | Published July 14, 2016  -  Deadline July 28, 2016
cpvs

"SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions."SLAC needs to procure an Acoustic Optic Programmable Dispersive Filter (AOPDF) for amplitude and phase pulse shaping.It should insert directly in-line into a laser system without modification.It should use a 25mm long, high resolution band-cut TeO2 crystal, driven by an RF arbitrary signal generator unit that can be programmed through a software pre-installed on a laptop.The wavelength tuning range should be form 680 nm to 920 nm (instantaneous bandwidth of up to 240 nm).The spectral resolution should be 0.3 nm @ 800 nm.The intensity control dynamic range should be more than 45 dB.The maximum programmable delay should be 8 ps @ 800 nm.Acoustic waveform refreshing time should better that 3 ms.Diffraction efficiency at 120 Hz should be at least 50% over a bandwidth of 50 nm.Optical jitter less than 10 fs.Installation performed by SLAC laser personal.Provide a price and lead time quotation with signed Representations and Certifications no later than July 28, 2016. Source selection will be based on lowest price technically acceptable method and delivery must not be later than September 30,2016.Payment terms: N-30Freight terms: FOB DestinationThe resulting purchase order will be issued on a fixed price basis. SLAC National Accelerato Laboratory Terms & Conditions for Commercial Supplies and Services under $100,000 M365 (Rev 17Feb2015) will be made a part of the resulting order. Your firm is required to be registered in the System for Award Management (www.sam.gov).

Calibrated Gamma Exposure Materials Effects

National Aeronautics and Space Administration, Glenn Research Center | Published April 27, 2016  -  Deadline April 29, 2016
cpvs

NASA/GRC has a requirement for the following:- Calibrated Gamma Exposure Materials Effects NASA/GRC intends to award a contract to The University of Maryland, College Park, MD 20742, USA. This procurement is for conducting predefined experiments consisting of exposing samples to Bremsstrahlung radiation with user definable photon end point energies varying over a range of approximately 1 MeV to 3 MeV (million electron volts). The provider must be able to measure, control, and certify to a high-precision the electron current and electron end point energy level (i.e. the electron accelerating potential). The provider must be able perform a benchmark case of exposing samples for to a current of at least 175 micro Amp at 2 MeV. The provider must also have the ability to perform pre- and post-exposure gamma spectrum analysis on the samples using a High Purity Germanium Gamma Detector (such as HPGe), where posttest analyses needs to be performed within a short time interval ( The Government intends to acquire a commercial service using FAR Part 12 and the Simplified Acquisition Procedures in FAR Part 13. The Sole Source is under the authority of FAR 13.106-1(b)1. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:30p.m. EST on 4/29/2016. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are acceptable in response to this notice. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html.

UHV compatible linear actuators

Department of Energy, SLAC National Accelerator Lab | Published June 10, 2016  -  Deadline June 24, 2016
cpvs

"SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions."SLAC has a requirement for three compact, UHV compatible linear actuators with 10 mm of stroke, nanometer resolution and high force output.Technical specifications are:Max axial load >500NUHV compatibleTravel >=10mmNo heat load at restResolution better than 10nmMax speed >=0.1mm/sAxial stiffness >=1000N/mmFailsafe (no motion when powered off)absolute position encoder w/ ENDAT or SSI interface Facilities available to manufacture productLead time Compact in size Provide a price and lead time quotation with signed Representations and Certifications by no later than June 24, 2016.Source selection is based on lowest price technically acceptable method.Payment terms: N-30Freight terms: FOB destinationThe resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Commercial Supplies and Services under $100,000 M365 (Rev 17Feb2015) will be made a part of the resulting order. Any exceptions to terms and conditions must be submitted at the time of the quote or proposal. If no exceptions to terms and conditions are submitted at the time of the quote or proposal, you agree to accept the attached terms and conditions in full and waive any rights to raising exceptions at a later time. Please also put your reasons why such exceptions are taken.Your firm is required to be registered in the System for Award Management (www.sam.gov).

Schneider American Power Conversion (APC)

Department of the Navy, Naval Air Systems Command | Published August 29, 2016  -  Deadline August 31, 2016
cpvs

  All quotes/responses shall be submitted via email to christina.e.simpson@navy.mil no later than 31 August 2016 at 5:00 PM (EST)   Solicitation N00421-16-T-0563 is issued as a competitive procurement.  The Government intends to purchase on a firm fixed-price basis, and to solicit and negotiate the proposed purchase order on a competitive basis for BRAND NAME hardware provided by Schneider Electronics in accordance with the Statement of Work.  Schneider Electric IT Federal (or its authorized resellers) is the sole proprietor for APC energy management solutions.  This requirement is to upgrade the current legacy solutions with new products and technology.  Schneider Electric has historical and relevant knowledge of the MPRA SPF lab requirements as they installed the previous legacy energy management systems.  All functionality and components requested are mandatory.  The MPRA SPF houses mission critical software production environments and program data which require an energy management solution to be in place to reduce the risk of data loss or system downtime.   ***Include any shipping and/or freight charges in your quote, if applicable.***  ***This procurement must be invoiced and received prior to 30 SEP 2016. ***   ***Authorized resellers should submit their authorized reseller letter with their quote.***     ***Basis for Award***   Solicitation closing date/time is firm; proposals received after the deadline will not be accepted.  Selected bidder's decision to submit proposal on the final day of solicitation and requesting for an extension will not be granted.  Extension is solely within the discretion of the government agent.  Interested bidders must address their questions, & concern while solicitation is active.  Your quote must contain enough technical information, data sheet, drawing, & specification for evaluation.  Your quote will only be evaluated based on the information provided.  Additional documents, questions, concerns, modifications, or any other information in relation to your quote will not be entertained or accepted when posting was already concluded.  The award will be made on the basis of lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factor.  This is firm fixed-price procurement; therefore, the initial offer should represent the vendor's best quote in terms of price and technical acceptability.  A determination by the Government not to accept the proposal for not meeting the minimum requirement is solely within the discretion of the Government.    ONLY New Equipment, NO Remanufactured, and all items must be covered under the manufacturer's warranty.  Similar or Substitute products will not be accepted. Interested parties must be registered in System for Award Management (SAM) Database prior to submission of an offer to be considered for award of any Department of Defense contract.  This can be accomplished electronically at http://www.sam.gov/vendor.cfm.   Government Point of Contact:  Christina Simpson Naval Air Warfare Center AD (PAX) 2.5.1 RAC, 21983 Bundy Road, BLDG 441 Patuxent River, MD 20670-1127 Email: christina.e.simpson@navy.mil (preferred method)  

x-ray imager

Department of Energy, SLAC National Accelerator Lab | Published June 29, 2016  -  Deadline July 14, 2016
cpvs

"SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions."SLAC has a requirement for a charge-integrating x-ray detector system for imaging experiments at LCLS. The pixel size shall be between about 50 and 100um. The pixel noise shall be around 100 electrons or below for singlephoton identification and sub-pixel position reconstruction into thetender x-ray range. The maximum signal shall be at least 10^4 8keVphotons. The quantum efficiency of the sensor shall be high (>90%)over the range 2-20 keV and the system noise should be below thePoisson limit from photon statistics throughout that range. Thecamera must be linear to 1% over the range. The camera shall read outat over 1kHz.The individual sensor elements shall provide about 0.5Mpixels in asingle monolithic sensor.The camera system shall be vacuum compatible to 10-6 Torr. It must usea cable harness and fibers consistent with a small flange. It mustsupport standard cooling methods.The overall camera dimensions should be compact and not exceed 100mmin depth. Precise camera mounting support should be provided, andsupport for insertable filters is desirable.Provide a price and lead time quotation with signed Representations and Certifications by no later than July 14, 2016. Source selection will be based on lowest price technically acceptable method.Payment terms: Net 30FOB: DestinationThe resultign purchase order will be issued on a firm fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Commercial Supplies and Services under $100,000 M365 (Rev 17Feb2015) will be made a part of the resulting order.

Digital I/O module

Department of Energy, SLAC National Accelerator Lab | Published July 11, 2016  -  Deadline July 25, 2016
cpvs

"SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions."SLAC has a requirement for the following:1.) Siemens TP 1900, 18.5 in TFT Touch Screen # 6AV2124-OUC02-0AX0 = Qty 22.) Siemens Digital Input Module # 6ES7131-6BF00-0CA0 = Qty 33.) Siemens Digital Output Module # 6ES7132-6BF00-0CA0 = Qty 34.) Siemens Analog Input Module # 6ES7134-6HD00-0BA1 = Qty 45.) Siemens Analog Output Module # 6ES7135-6HB00-0CA1 = Qty 46.) Siemens Module # 6ES7136-6DB00-0CA0 = Qty 47.) Siemens Module # 6ES7136-6RAA00-0BF0 = Qty 118.) Siemens Profinet Interface Module # 6ES7155-6AU00-0CN0 = Qty 39.) Siemens Busadapter # 6ES7193-6AR00-0AA0 = Qty 310.) Siemens Baseunit # 6ES7193-6BP00-0DA0 = Qty 511.) Siemens Baseunit # 6ES7193-6BP00-2BA0 = Qty 1012.) Siemens Baseunit # 6ES7193-6BP20-0BF0 = Qty 1013.) Siemens Central Processing Unit # 6ES7515-2FM01-0AB0 = Qty 214.) Siemens Mountail Rail # 6ES7590-1AE80-0AA0 = Qty 115.) Siemens ASM Memory Card # 6ES7954-8LF02-0AA0 = Qty 116.) Siemens Scalance X308-2LD, # 6GK5308-2FM10-2AA3 = Qty 4Provide a price and lead time quotation with signed Representations and Certifications by no later than July 25, 2016. Source selection will be based on lowest price method.Payment terms: N-30Freight terms: FOB DestinationThe resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Commercial Supplies & Services under $100,000 M365 (Rev 17Feb2015) will be made a part of the resulting order.

LCLS-II SXRKB Prototype Mirror

Department of Energy, SLAC National Accelerator Lab | Published April 12, 2016  -  Deadline April 21, 2016
cpvs

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.HI, Please provide me with a written quotation for the following items: 1.) Single Crystal silicon 1 meter long x-ray mirror per Engineering Specification Document : LCLS II Soft X-Ray Prototype KB Mirror. Document Number : LCLSII - 3.5-ES-06047-R0 page 1 to 5 approved by Project Technical Director David Schultz on April 4, 2016. = Qty 1 NOTE: SC-375-707-01 is attached. Main Specification for the mirrors are attached. Source selection is lowest price technically acceptable method. The bid closing date for this Request for Quote is April 21, 2016. Please include delivery schedule in your quote. M364 Terms and Conditions are attached and apply to this request for quote. "Any exceptions to terms and conditions must be submitted at the time of the quote or proposal. If no exceptions to terms and conditions are submitted at the time of the quote or proposal, you agree to accept the attached terms and conditions in full and waive any rights to raising exceptions at a later time". Please also put your reasons why such exceptions are taken. Payment Terms: N-30 if not indicated otherwise. Freight terms: FOB Destination SLAC Standard Reps and Certs apply and must be returned together with quote. E-Verify Requirements. This solicitation falls under the reporting requirements of E-Verify. Within thirty (30) days of award of a Subcontract the awardee must provide proof of enrollment in the E-Verify Program. If proof of enrollment is not received within the specified timeframe the subcontract must be subject to cancellation. If you are unfamiliar with E-verify the following link will provide you with a detailed information. www.dhs.gov/E-verify. Sincerely,Katherine Jill A. CohProcurement RepresentativeSLAC National Accelerator Laboratory2575 Sand Hill RoadMenlo Park, CA 94025phone: 650-926-2770fax: 650-926-2000email: kcoh@slac.stanford.edu  

Turbo Molecular Pump

Department of Energy, SLAC National Accelerator Lab | Published April 4, 2016  -  Deadline April 19, 2016
cpvs

Dear Supplier,SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. Please provide a written quotation for the following items below in the quantity of 3 each. Item 1: Turbo Pump KitHV Power Supply HiPace 300, DN 100 CF-F, TC 400, DCU 310, mains cable, connection cable, air cooling fan, and TuboViewer software on USB stick. Turbo molecular pump, Nominal 300 L/sec. DN 100 CF flange. Permanent Magnetic bearing in high vacuum, ceramic ball bearing in foreline. Nitrogen pumping speed 260 L/sec. Hydrogen compression ratio >= 9x105. Gas throughput for nitrogen 1400 Pa-Liter/sec. Communication RS-485 and remote contacts. Mounting orientation: any. Item 2: Mains Cable115V AC, (USA/J) length: 3m with UL-plug NEMA 5-15 Euro Style. Item 3: Venting Valve24 V DC, G 1/8" for connection with TC 400 Item 4: Protection Screen: description - Protection screen for DN 100 CF-F pump. Source selection will be based on lowest price technically acceptable. NOTE: · The bid closing date for this request for quote is April 19, 2016 @4:00PM PST/PDT. · Please include lead time in your quote. · M365 terms and conditions are attached and apply to this request for quote. "Any exceptions to terms and conditions must be submitted at the time of the quote or proposal. If no exceptions to terms and conditions are submitted at the time of the quote or proposal, you agree to accept the attached terms and conditions in full and waive any rights to raising exceptions at a later time." Please also put your reasons why such exceptions are taken. · Payment Terms: N-30 · Freight terms: FOB Destination · SLAC Standard Reps and Certs apply and are attached, please complete and returned along with this request for quote. Thank you.... Best regards, Sophia PerryPurchasingSLAC National Accelerator Laboratory2575 Sand Hill RoadMenlo Park, CA 94025Direct: (650) 926-3605Email: sophiap@slac.stanford.edu

Wafers

Department of Energy, SLAC National Accelerator Lab | Published June 6, 2016  -  Deadline June 20, 2016
cpvs

"SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions."SLAC has a requirement for a fabrication of a set of 12, 200-millimeter-diameter, silicon wafers with custom Complementary Metal Oxide Semiconducting (CMOS) imaging sensors. The process should have a minimum feature size of 150 nanometers or finer and have a minimum of 6 metal layers, metal-insulator-metal capacitor structures, diffusion contact to p-type substrate, and a deep n-type well implant.Reticule and chip area of 9.51 mm by 25.8 mm or larger.Substrate wafer should have a bulk resisitivity of 200 Ohm-cm to higher.The vendor will provide a comprehensive technology design kit compatible with standard integrated circuit design tools. SLAC will supply a custom design file in GDS format. Provide a price and lead time quotation with signed Representations & Certifications by no later than June 20, 2016. See attached Scope of Work.Source selection will be based on lowest price technically acceptable method. Please indicate delivery schedule in your quote. Payment Terms: N-30Freight terms: FOB DestinationThe resulting purchase order will be issued a fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Non-Commercial Supplies and Services M364 (Rev 17Feb2015) will be made a part of the resulting order. Your firm is required to be registered in the System for Award Management (www.sam.gov).(If-applicable) E-VERIFY REQUIREMENTSThis solicitation falls under the reporting requirements of E-Verify. Within thirty (30) days of award of a Subcontract the awardee must provide proof of enrollment in E-verify Program. If proof of enrollment is not recieved within the specified timeframe the subcontract may be subject to cancellation. If you are unfamiliar with E-verify the following link will provide you with detailed information. www.dhs.gov/E-Verify

LASER VIBROMETER

Department of Energy, SLAC National Accelerator Lab | Published June 9, 2016  -  Deadline June 23, 2016
cpvs

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. SLAC has a requirement for Brand Name or Equal Brand- QTY-1 of part number OFV-5000 High Performance Modular ControllerQTY-1 of part number VD-09 Velocity Output Decoder, High Bandwidth, Digital QTY-1 of part number DD-900 Wide bandwidth 16-range Digital Displacement Decoder QTY-1 of part number OFV-552-2 Dual Fiber-Optic, Differential Laser Sensor (2m Cable) QTY-1 of part number VIB-A-P35 X-Y Linear/Rotational Stage 18 mm Travel in X and Y. For positioning 10mm diameter fiber probes. Includes post and circular base and OFV-036 tip/tilt QTY-1 of part number OMA-035-B Heavy Duty Tripod with Pan/Tilt Head Smooth, quick, precise positioning of vibrometer optical heads Built-in spirit levels. Hex quick-release plate included. QTY-1 of part number OMA-036-5 Retro reflective Sheet 2ft wide x 5 ft long. Used to enhance measurement signal-to-noise and for poorly back-reflecting surfaces. Provide a price and lead time quotation with signed Representations & Certifications by no later than June 23, 2016, 4:00pm Source selection will be based on lowest price technically acceptable. Must meet lead time of 8 weeks or sooner.Payment Terms: N-30Freight terms: FOB DestinationThe resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Commercial Supplies and Services under $100,000 M365 (Rev 17Feb2015) will be made a part of the resulting order. Your firm is required to be registered in the System for Award Management (www.sam.gov).

Differential pumps

Department of Energy, SLAC National Accelerator Lab | Published June 14, 2016  -  Deadline June 28, 2016
cpvs

"SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions."SLAC has a requirement for Differential Pumps per Engineering Note M757 rev 1.Differential pump 1 per Engineering Note M757 Rev 1 = Qty 1Differential pump 2 per Engineering Note M757 Rev 1 = Qty 1Technical specifications are:1.) EN M757r1 Section 2.4 space constraints2.) EN M757r1 Section 3.0 differential pressure requirements3.) EN M757r1 Section 4.0 beam aperture requirementsProvide a price and lead time quotation with signed Representations & Certifications by no later than June 28,2016.Delivery schedule should not be later than October 17, 2016.See attached SSRL BL16-2 Differential Pumps Aperture and Pressure SpecificationSource selection will be based on lowest price technically acceptable method.Payment Terms: N-30Freight terms: FOB DestinationThe resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Non-Commercial Supplies and Services M364 (Rev 17Feb2015) will be made a part of the resulting order. "Any exceptions to terms and conditions must be submitted at the time of the quote or proposal. If no exceptions to terms and conditions are submitted at the time of the quote or proposal, you agree to accept the attached terms and conditions in full and waive any rights to raising exceptions at a later time" Please also put reasons why such exceptions are taken. Your firm is required to be registered in the System for Award Management (www.sam.gov).(If applicable) E-VERIFY REQUIREMENTSThis solicitation falls under the reporting requirements of E-Verify. Within thirty (30) days of award of a Subcontract the awardee must provide proof of enrollment in the E-verify program. If proof of enrollment is not recieved within the specified timeframe the subcontract may be subject to cancellation. If you are unfamiliar with E-verify the following link will provide you with detailed information. www.dhs.gov/E-verify.

Hot Operating Temperature Technology (HOT Tech)

National Aeronautics and Space Administration, Glenn Research Center | Published July 21, 2016
cpvs

The National Aeronautics and Space Administration (NASA) Glenn Research Center plans to issue a NASA Research Announcement (NRA) for fundamental research and development of technologies for the robotic exploration of high-temperature environments such as the Venus surface, Mercury, or the deep atmosphere of Gas Giants. The goal of the program is to develop and mature technologies that will enable, significantly enhance, or reduce technical risk for in-situ missions to high-temperature environments with temperatures approaching 500 degrees Celsius or higher. It is a priority for NASA to invest in technology developments that mitigate the risks of mission concepts proposed in response to upcoming Announcement of opportunities (AO) and expand the range of science that might be achieved with future missions. Note that the Hot Operating Temperature Technology (HOT Tech) solicitation is not soliciting hardware for a flight opportunity nor is it directed toward instrument development, as instrument development is addressed with the PICASSO or MatISSE programs.Examples of applicable technology efforts include, but are not limited to high temperature electrical / electronic systems, solar power cells, batteries, and wind or other energy harvesting power generation and storage systems, deployment mechanisms, thermal control systems, communication systems and any other system that would be needed for potentially extended in-situ missions to such environments. NASA seeks to maximize the benefits of its technology investments and consequently technologies which offer terrestrial benefits in addition to meeting planetary science needs are of interest. While specific technology readiness levels (TRL) are not prescribed for the HOT Tech program, proposers are reminded that the goal of the program is to mature technologies so they can be proposed as part of a selectable mission concept or technology demonstration to a flight AO with reduced risk. It is the responsibility of the proposer to describe how their proposed technology development effort addresses the goals of enabling or enhancing future mission capability or reducing risk and how the technology will be matured for a flight opportunity as part of an integrated system. Efforts that focus on advancing the TRL of a system composed of multiple existing technologies at various TRLs are allowed under this opportunity. The anticipated release date of the NRA is on or about Aug 15, 2016 with anticipated offer due dates on or about August 15, 2016 (Step 1 proposal) and September 15, 2016 (Step 2 proposals due).  

Quadrupole Spectrometer

Department of Energy, SLAC National Accelerator Lab | Published January 13, 2015  -  Deadline January 27, 2015
cpvs

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. Sources sought for: 1.) Quadrupole Mass Spectrometer = Qty 1 Brand Name or equal to Hiden Analytical HAL/3F RC 301 with 300amu Mass Range and PIC Detector. <

The Government is seeking to lease space in Sault Ste. Marie, MI for a minimum of 2,908 ABOA to a maximum of 3,053 ABOA - 4MI0315

General Services Administration, Public Buildings Service (PBS) | Published October 5, 2015  -  Deadline October 26, 2015
cpvs

Solicitation for Offers No: GS-05P-LMI19241 Procurement Type: Pre-solicitation Date Posted: 10/05/2015 Statement of Requirements: The U.S. Government currently occupies office and related space in a building under lease in Sault Ste Marie, MI that is expiring. The Government is considering alternative space if economically advantageous. In making this determination, the Government will consider, among other things, the availability of alternate space that potentially can satisfy the Government requirements, as well as costs incurred through relocating, such as physical moving costs, replication of tenant improvements and telecommunications infrastructure, and non-productive agency downtime. The offered office and related space will be located in Sault Ste Marie, MI for a minimum of 2,908 ANSI/BOMA Office Area (ABOA) to a maximum of 3,053 ABOA square feet. City, State: Sault Ste Marie, MI Delineated Area: Within the following boundaries: City Limits of Sault Ste Marie, MI Minimum Sq. Ft. (ABOA): 2,908 Maximum Sq. Ft. (ABOA): 3,053 Space Type: Office and Related Space Parking Spaces (Total): 0 Parking Spaces (Surface): 0 Parking Spaces (Structured): 0 Parking Spaces (Reserved): 0 Full Term: 10 years Firm Term: 5 years Option Term: N/A Additional Requirements: Space must be located in a prime commercial office district with attractive surroundings with a prevalence of modern design and/or tasteful rehabilitation in modern use. Space shall be located in a professional office setting and not within close proximity to railroad tracks or power transmission lines. Space will not be considered where any living quarters are located within the building. Space shall not be located within the 100-year flood plain or wetland unless the Government has determined it to be the only practicable alternative. Space should not be located near establishments whose primary operation is the sale of alcoholic beverages, firearms sold/discharged, or where there are tenants related to drug treatment or detention facilities. Regularly scheduled public transportation (if provided by municipality) during the workday is required within 2 city blocks or 600 feet, whichever is less. Subleases are not acceptable. Office space must be contiguous, on one floor. Space configuration shall be conducive to an efficient layout. Consideration for an efficient layout will include, but not be limited to the following: size and location of interior fire (support) walls, size and number of columns, column placement, bay depths, window size and placement, convector size and placement, electrical and telephone accessibility, and angles, curves or offsets that will result in an inefficient use of space. The following space configurations will not be considered: Space with atriums or other areas interrupting contiguous space, extremely long or narrow runs of space (more than twice as long as wide), irregularly shaped space configurations or other unusual building features adversely affecting usage. Columns must be at least 20 feet apart (center to center) and 20 feet from any interior wall. The offered space must meet or be capable of meeting Government requirements for Security, Fire Life Safety and Handicapped Accessibility. If space offered is above ground level, at least two (2) accessible elevators will be required. The Government requires a fully serviced lease. All services, janitorial supplies, utilities and tenant alterations are to be provided as part of the rental consideration. The Government will have access to the space 24 hours a day, 7 days a week. Normal hours of operation are Monday through Friday 7:00 a.m. to 5:00 p.m. (excluding Saturdays, Sundays and Federal Holidays). Expressions of Interest should include the following: •1) Building name and address and location of the available space within the building. The building site/lot plans, interior building layout drawings/pictures (with dimensions shown preferably) reflecting the space that is being offered. •2) Identification of public transit routes/stops near the property offered. •3) Rentable square feet available, and expected rental rate per rentable square foot, fully serviced. •4) ANSI/BOMA office area (ABOA) square feet to be offered, and expected rental rate per ABOA square foot, fully serviced. Indicate whether the quoted rental rate includes an amount for tenant improvements and state the amount, if any. •5) Date of space availability. •6) Building ownership information. •7) Amount of parking available on-site and its cost. Include whether expected rental rate includes the cost of the required Government parking (if any). •8) Energy efficiency and renewable energy features existing within the building. •9) List of building services provided. Projected Dates. Expressions of Interest Due: 20 Days After Posting Occupancy (Estimated): TBD Government Contact. In no event shall the offeror enter into negotiations or discussions concerning the space to be leased with representatives of any Federal Agency other than the officers and employees of the General Services Administration (GSA) or their authorized representative. Submit Expressions of Interest to: Peter Sellis Jones Lang LaSalle 200 E. Randolph Street, 45th Floor Chicago, IL 60601 312-228-3275 peter.sellis@am.jll.com

U.S. Government seeks to Lease 10,903 - 11,400 ABOASF of office space in Vienna / Tysons Corner, VA

General Services Administration, Public Buildings Service (PBS) | Published October 16, 2014  -  Deadline October 27, 2014
cpvs

U.S. GOVERNMENT General Services Administration (GSA) seeks to lease the following space: State: Virginia County: Fairfax City: Vienna / Tysons Corner Delineated Area: North – Dulles Toll Road / Route 267; East – I-495; West – Hunter Mill Road to Chain Bridge Road; South – Arlington Boulevard / Route 50. Minimum Sq. Ft. (ABOA): 10,903 Maximum Sq. Ft. (ABOA): 11,400 Space Type: Office Parking Spaces (Total): Parking must meet local code. Full Term: 10 years Firm Term: 5 years Option Term: 0 years Additional Requirements: Subleases are not acceptable. The Government prefers street-level, contiguous (same floor) space. Contiguous upper floor space on one floor which meets GSA lease criteria and has handicapped accessible elevator service (two (2) elevators minimum) to the government office floor is an acceptable alternative. The space must be within ½ mile of public transportation. Space should be professional quality office space. The overall dimensions of the space shall have a maximum length to width ratio of 2 to 1. Blocks of space allow maximum flexibility for furniture placement, i.e., few or no columns or other obstructions, rectangular in shape, no curves or off-sets, and with large open areas. Space requiring ramps inside the office will not be acceptable. Columns in the space must be at least 20 feet from any interior wall and from each other (clear distance) and be no more than two feet square. The Government intends to use the information requested below from prospective sources to issue a Request for Lease Proposal. This procurement will be subject to all the rules, regulations, conditions and specifications stated in the Request for Lease Proposal that will be sent out pursuant to this advertisement. The Government currently occupies leased office and related space that will be expiring. The required occupancy date is no later than May 31, 2016. Whether or not an offered building can meet the required occupancy date is in the sole discretion of the Contracting Officer. Buildings offered for consideration must have the ability to meet all current Federal/GSA/PBS, State, and Local codes and regulations including, but not limited to, fire and life safety, handicapped accessibility, and OSHA by the required occupancy date per the terms of the Lease. The building must also have the ability to meet certain building and energy efficiencies in accordance with the Energy Independence and Security Act. The proposed leased space shall be fully serviced. Offered space shall not be in a flood plain that floods more often than a 100 year flood plain. Offered space in a 100 year flood plain will not be considered, if there is other offered space in a 500 year flood plain or flood plain that floods less often than a 500 year flood plain or that is not in a flood plain. If the only offered space is in a 100 year flood plain, then it will be considered if there are no practical alternatives. Expressions of Interest must be received in writing no later than Monday, October 27, 2014 at 12:00 PM, and should include the following information at a minimum: • Building name and address; • Location of space in the building and date of availability; • Rentable Square Feet (RSF) offered and full service rental rate per RSF; • ANSI/BOMA office area (ABOA) square feet offered and full service rental rate per ABOA SF; • Scaled floor plans (as-built) identifying offered space; • Evidence of ability to meet the required occupancy date of no later than May 31, 2016; • Name, address, telephone number, and email address of authorized contact. Owners, brokers, or agents may offer space for consideration. Any properties submitted by brokers or agents must be accompanied by written evidence that they are authorized by the ownership to exclusively represent the building offered. Projected Dates: Expressions of Interest Due: October 27, 2014 Market Survey (Estimated): November 19, 2014 Offers Due (Estimated): February 12, 2015 Occupancy (Estimated): May 31, 2016 Authorized Contacts: GSA is using a tenant broker to represent the Government in lease negotiations for this transaction. In no event shall the Offeror enter into negotiations or discussions concerning this space requirement with any Federal Agency other than the General Services Administration (GSA) Lease Contracting Officer or their authorized representative, Jones Lang LaSalle Americas, Inc. Interested parties should send expressions of interest to the mailing or email address below: Jones Lang LaSalle Americas, Inc. Attn: Howard Traul 1801 K Street, NW – Suite 1000 Washington, DC 20006 (202) 719-5860 Howard.Traul@am.jll.com With a copy sent to: GSA – Public Buildings Service Attn: Glenn Harvey 301 7th St SW, Room 1610 Washington, DC 20407 Glenn.Harvey@gsa.gov Please reference Project Number 2VA0637. Contracting Office Address: 1801 K Street, NW – Suite 1000 Washington, DC 20006 Primary Point of Contact: Howard Traul GSA Broker Representative Jones Lang LaSalle Howard.Traul@am.jll.com (202) 719-5860