Public tenders for energy in Abingdon United Kingdom

Find all Energy tenders in the world.
Finding business opportunities has never been easier.

Results for energy. Make a new search!

Manufacture, Supply and Installation of a Laser Flash Apparatus

United Kingdom Atomic Energy Authority | Published February 7, 2017
Winner
Linseis Messgeraete GmbH
cpvs
38000000

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy.

At the Culham Centre for Fusion Energy the Authority hosts the world's largest magnetic fusion experiment, JET (Joint European Torus), on behalf of its European partners. The JET facilities are collectively used by all European fusion laboratories under the EUROfusion consortium.

As part of a continuing research programme into the study of radio-active neutron irradiated samples, there is a requirement for a Laser Flash Apparatus for our new Materials Research Facility at Culham.

The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract.

Manufacture, Supply and Installation of a Laser Flash Apparatus

United Kingdom Atomic Energy Authority | Published December 6, 2016
cpvs
38000000

The UK Atomic Energy Authority is a non

departmental government body carrying out research into the potential of nuclear fusion as a future source of energy.

At the Culham Centre for Fusion Energy the Authority hosts the world's largest magnetic fusion experiment, JET (Joint European Torus), on behalf of its European partners. The JET facilities are collectively used by all European fusion laboratories under the EUROfusion consortium.

As part of a continuing research programme into the study of radio-active neutron irradiated samples, there is a requirement for a Laser Flash Apparatus for our new Materials Research Facility at Culham.

The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract.

Modular Data Centre and High Throughput Computing Infrastructure

United Kingdom Atomic Energy Authority | Published October 21, 2016
cpvs
72322000

The United Kingdom Atomic Energy Authority (UKAEA), hereafter referred to as the ‘Purchaser’, carries out research into the use of controlled fusion for the generation of power and is based at Culham Science Centre in Oxfordshire. The Purchaser has a requirement for a Modular Data Centre (MDC) and High Throughput Computing (HTC) infrastructure to support its activities. This will extend existing data centre capacity and provide a platform for developing scientific and engineering computing over a number of years. The intention is to purchase a partially populated MDC in year 1 and then add additional compute and data storage systems each year during year 2 to 5. A tender is being carried out to select the best supplier for the year 1 requirements.

Process Plant For a Materials Detritiation Facility

United Kingdom Atomic Energy Authority | Published August 12, 2016
Winner
Nuvia Ltd
cpvs
42418500, 51540000

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy.

At the Culham Centre for Fusion Energy the Authority hosts the world's largest magnetic fusion experiment, JET (Joint European Torus), on behalf of its European partners. The JET facilities are collectively used by all European fusion laboratories under the EUROfusion consortium.

The Authority has a requirement for the manufacture, supply, installation and commissioning of process plant for a materials detritiation facility associated with the JET facilities.

The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract.

Supply of Tritium Compatible Turbo Molecular Pumps

United Kingdom Atomic Energy Authority | Published August 13, 2016
Winner
Agilent Technologies LDA UK Limited
cpvs
31681200

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy.

At the Culham Centre for Fusion Energy the authority hosts the world's largest magnetic fusion experiment, JET (Joint European Torus), on behalf of its European partners. The JET facilities are collectively used by all European fusion laboratories under the EUROfusion consortium.

The authority has a requirement for the manufacture and supply of ten (10) Tritium Compatible Turbo Molecular Pumps as part of the DTE2 preparations project for JET facility.

The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract.

Supply of Tritium Compatible Turbo Molecular Pumps

United Kingdom Atomic Energy Authority | Published June 28, 2016
cpvs
31681200

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy.

At the Culham Centre for Fusion Energy the Authority hosts the world's largest magnetic fusion experiment, JET (Joint European Torus), on behalf of its European partners. The JET facilities are collectively used by all European fusion laboratories under the EUROfusion consortium.

The Authority has a requirement for the manufacture and supply of 10 Tritium Compatible Turbo Molecular Pumps as part of the DTE2 preparations project for JET facility.

The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract.

For the Analysis of Aqueous Trade Effluent

United Kingdom Atomic Energy Authority | Published May 26, 2016
Winner
Latis Scientific limited
cpvs
71620000, 90700000

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy.

At the Culham Centre for Fusion Energy (CCFE) the Authority hosts the world's largest magnetic fusion experiment, JET (Joint European Torus), on behalf of its European partners. The JET facilities are collectively used by all European fusion laboratories under the EUROfusion consortium.

The JET machine and associated facilities generate quantities of radioactive and trade effluents. The trade effluents include aqueous process wastes, cooling water, wash water and ground water which subsequently discharge into Controlled Waters. All trade effluent discharges are subject to specific consent issued by the Environment Agency EA. This consent states limits which CCFE must adhere to. Discharges must be controlled and monitored to ensure CCFE's compliance with the consent issued under the Water Resources Act 1991. CCFE requires a Contractor with experience in carrying out sample analysis of aqueous trade effluent. The Contractor should be able to meet a 26.5 hour turnaround for collection of sample(s). In exceptional circumstances this turnaround could be extended to 30.5 hours.

Design, Manufacture, Install and Commission Furnace Systems for Materials Detritiation Facility.

United Kingdom Atomic Energy Authority | Published March 17, 2016
Winner
Carbolite Gero Ltd
cpvs
42300000

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy.

At the Culham Centre for Fusion Energy the Authority hosts the world's largest magnetic fusion experiment, JET (Joint European Torus), on behalf of its European partners. The JET facilities are collectively used by all European fusion laboratories under the EUROfusion consortium.

The Authority has a requirement for the Design, Manufacture Installation and Commissioning of Furnace Systems for a Materials Detritiation Facility.

The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract.

Cooling System for Water Detritiation System.

United Kingdom Atomic Energy Authority | Published October 27, 2015
Winner
Sumitomo Cryogenics of Europe Limited
cpvs
31161200, 38570000

The UK Atomic Energy Authority is a non-departmental government body carrying out research into the potential of nuclear fusion as a future source of energy. At the Culham Centre for Fusion Energy the Authority hosts the world's largest magnetic fusion experiment, JET (Joint European Torus), on behalf of its European partners. The JET facilities are collectively used by all European fusion laboratories under the EUROfusion consortium. The Authority has a requirement for a cooling system for a water detritiation system associated with the JET facilities. The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract.

Fabrication, machining, welding and testing (pressure and vacuum) of copper J — plates.

United Kingdom Atomic Energy Authority | Published November 14, 2015
Winner
PVA Industrial Vacuum Systems GmbH
cpvs
14715000, 14735000

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy. At the Culham Centre for Fusion Energy the Authority hosts the world's largest magnetic fusion experiment, JET (Joint European Torus), on behalf of its European partners. The JET facilities are collectively used by all European fusion laboratories under the EUROfusion consortium. The Authority has a requirement for the fabrication, machining, welding and testing (pressure and vacuum) of copper J plates associated with the JET facilities. The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract.

Manufacture of Carbon-Carbon Fibre Composite Material for High Heat Flux and High Vacuum Applications.

United Kingdom Atomic Energy Authority | Published December 15, 2015
cpvs
24311800, 14814000

The UK Atomic Energy Authority is a non-departmental government body carrying out research into the potential of nuclear fusion as a future source of energy. The Authority has a requirement for a material for high heat flux and high vacuum applications. Potential suppliers are requested to supply details of their available grades of carbon-carbon fibre composites. Of particular interest to the Authority are: — The thermal conductivity at 200 degrees centigrade, this should be in excess of 190 W/(mK) in at least 2 directions and in excess of 50 w/(mK) in the remaining direction; — The flexural strength which should be above 80 MPa; — Low thermal expansion coefficient and high density (above 1 700 kg/m3) which are an advantage; — High-purity (less than 100 ppm impurities). The material is required in block sizes in excess of 190 mm x 400 mm x 65 mm. Approximately, 50 pieces are required. This PIN has been published to enable market research to commence to asses the reaction of the market to the proposed requirement and review available technologies. The Authority will conduct a dialogue with the marketplace. This may result in a call for competition based on the content of the requirement achieved through the dialogue.

Supply of Bulk, Cylinder and Special Gases to United Kingdom Atomic Energy Authority.

United Kingdom Atomic Energy Authority | Published December 19, 2015
Winner
BOC Ltd
cpvs
24100000, 24111800

The United Kingdom Atomic Energy Authority is a non-departmental government body carrying out research into the potential of nuclear fusion as a future source of energy. The United Kingdom Atomic Energy Authority manages the UK and European Fusion Programme through it's research arm Culham Science Centre for Fusion Energy in Oxfordshire with the aim of magnetically confining and studying the behaviour of plasma in conditions and dimensions approaching those required in a fusion reactor. As part of a continuing research programme there is a requirement for the supply of a range of Gases. The JET cryoplant supplies Helium and Nitrogen in liquid and gaseous form, which is used to create an ultra high vacuum within the JET machine. Liquid Nitrogen is primarily used for vacuum generation and the thermal shielding of liquid Helium transfer lines throughout the JET facility. MAST uses additional heating known as NBI (Neutral Beam Injection). NBI mainly uses Hydrogen and Deuterium gas, whilst Pellet Injection uses Liquid Helium. Cylinder gases are issued by the stores section to users on site to support JET and MAST. There is also a requirement for a range of special gas grades, type mixes and cylinder sizes.

Disposal of Hazardous Waste

 | Published October 2, 2015
cpvs
90523000

The United Kingdom Atomic Energy Authority is looking to procure a contract for the disposal of Hazardous Waste at its Science Research Centre at Culham. A full description of the requirement and list of waste streams are in the tender documents, please see attached link. Companies should note there are mandatory requirements to be met for you to be considered for this work. Full details are given within the tender documents. This will initially be for one year with options to extend for a further four years.

Detailed design and Manufacture of Remote Handling Boom Interface Control Cubicles including associa

United Kingdom Atomic Energy Authority | Published August 28, 2015
cpvs
42967000, 31710000

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy. Electrical/Electronic Engineering design resource is required to support the Enhancement of the Remote Handling equipment deployed on the Joint European Torus (JET) machine. The Octant 1 and Octant 5 Remote Handling Boom Integrated Control Cubicles (SBIC & BIC) are distributed controllers that provide a C & I provision to the Octant 1 and Octant 5 Booms supporting a range of bespoke electro-mechanical devices mounted on the Booms, and a highly dextrous remotely controlled manipulator incorporating bi-lateral, force feedback. Several smaller devices and auxiliary tools are also monitored and controlled. From a supplied Requirements Specification, the following Services are required: — The detailed design, manufacture and supply of two control cubicles that contain electrical and mechanical items and associated basic (PLC type) software which will replace the existing two cubicles that are now obsolete. — Selection and supervision of an equipment builder(s) to provide new equipment (if not within the Contractor's capability). — Project Management. — Provision of Quality assurance. — Factory and Site Acceptance Tests of the supplied control cubicles. — Provision of Documentation Package, including design calculations, drawings, schematics, Bill of Materials and an Operation and Maintenance manual. The Contractor is expected to work in close cooperation with the Authority engineers throughout all phases of the supply. The contractor will need to demonstrate previous experience in the supply of the following. — Integration of new I/O systems with legacy plant. — Designing and working with Beckhoff hardware / EtherCAT. This PIN has been published to enable market research to commence to asses the reaction of the market to the proposed requirement and review available technologies. The Authority will conduct a dialogue with the marketplace. This may result in a call for competition based on the content of the requirement achieved through the dialogue.

Replacement ERP System.

United Kingdom Atomic Energy Authority | Published July 25, 2015
Winner
Unit 4 Business Software Ltd
cpvs
48451000, 72212441

The United Kingdom Atomic Energy Authority has a requirement for an enterprise resource planning solution for 700 staff. The Authority is a non-departmental body carrying out research into fusion energy and wishes to replace a SAP service purchased in 2004. The solution must support core HR functions including time sheets, core finance functions based around project accounting and the procurement of both catalogue and complex non-standard items. A hosted solution with implementation services is required.

Fabrication, machining, welding and testing (pressure and vacuum) of copper J-plates.

United Kingdom Atomic Energy Authority | Published June 16, 2015
cpvs
14710000, 14730000

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy. The Authority has a requirement for between 8 and 12 Copper Chrome Zirconium J-Plates which are approximately 400 mm long x 330 mm wide x 40 mm thick. The manufacturing work involves fabricating (bending), machining and welding of the material followed by pressure and vacuum leak testing. Additionally, there are Stainless Steel, Nickel and Copper pipework assemblies which are Electron Beam welded together into the J-Plate component. This PIN has been published to enable market research to commence to asses the reaction of the market to the proposed requirement and review available technologies. The Authority will conduct a dialogue with the marketplace. This may result in a call for competition based on the content of the requirement achieved through the dialogue.

Manufacture of Graphite Armour Tiles.

United Kingdom Atomic Energy Authority | Published June 30, 2015
Winner
SGL Carbon
cpvs
24311800

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy. The Authority operates MAST, which forms part of the UK & European Fusion Programme with the aim of magnetically confining and studying the behaviour of a plasma in conditions and dimensions approaching those required in a fusion reactor. MAST Upgrade is a programme designed to update the machine and push the limits of operations even closer. The MAST machine compromises of a vacuum vessel made of a cylindrical shell, two circular end plates and a thin centre tube in the middle, providing access and location for resistive coils and services in the vault created. Plasma facing surfaces are covered by tiles made of fine grain, high density isotropic graphite. The objective of this contract is the manufacture of graphite armour tiles. Typical material properties of the material are given below: Bulk Density greater or equal to 1 820 kg/m3, Grain Size 8-15 um, Specific Resistance 10-12 u ohm m, Thermal Conductivity greater than 100 W/m degrees C, Ash Content greater than 20 ppm and high strength. The scope of work for the production of the graphite armour tiles (but is not limited to): Manufacture of all jigs and fixtures. Manufacture and machining of test pieces to demonstrate tolerances and fit. Manufacture and machining of all tiles to final dimensions. Dimensional inspection of all components. Qualification of processes such as cleaning & heat treatment. Vacuum baking and cleaning of the components to UHV standards. Packaging & Delivery The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract. Invitation to Tender documents can be accessed for download by registering using the electronic access to Information URL link given in section I.1 above and responding to the e-mail which is sent automatically following registration.

DEMO Engineering Data Model and Database.

United Kingdom Atomic Energy Authority | Published April 18, 2015
Winner
Projectglobe Ltd
cpvs
71323200, 71340000, 72227000

United Kingdom Atomic Energy Authority are looking to place a 4-year contract, for support with designing and implementing a model-based engineering data management system for the DEMO future fusion plant Concept Design Activity. The successful applicant will assist with requirements capture to understand the system needs, develop a suitable data model for the system, implement the system solution in an appropriate software environment, populate it with existing concept design data, and assist with its phased roll-out and adoption across the international DEMO engineering community.

Manufacture,Supply and Installation of Ventilation System.

United Kingdom Atomic Energy Authority | Published February 25, 2015
cpvs
42520000, 45331210, 31600000, 35113200, 35113210, 39717000, 42912350

The UK Atomic Energy Authority is a non departmental government body carrying out research into the potential of nuclear fusion as a future source of energy. The Authority has a requirement for a stand-alone building ventilation system for a facility processing hazardous materials. The anticipated total ventilation throughput is ~15 000 m³/hour, distributed across several sub-systems. The requirement includes plant, control systems and ductwork necessary to provide control of incoming air, high-efficiency particulate filtration of extracted air and suitable aerial discharge arrangements. The system requires compliance with UK nuclear industry codes of practice e.g. NVF/DG001. This PIN has been published to enable market research to commence to asses the reaction of the market to the proposed requirement and review available technologies. The Authority will conduct a dialogue with the marketplace. This may result in a call for competition based on the content of the requirement achieved through the dialogue.

The Manufacture, Supply and Installation of Hot Cells.

United Kingdom Atomic Energy Authority | Published November 8, 2014
Winner
Aquila Nuclear Engineering Ltd
cpvs
38940000

The UK Atomic Energy Authority is a non-departmental government body carrying out research into the potential of nuclear fusion as a future source of energy. The UK Atomic Energy Authority manages the UK and European Fusion Programme through its research arm Culham Science Centre for Fusion Energy in Oxfordshire with the aim of magnetically confining and studying the behaviour of plasma in conditions and dimensions approaching those required in a fusion reactor. As part of a continuing research programme there is a requirement for the manufacture installation and commission of a number of inter-grated Hot Cells. The works are to be carried out in an acceptably safe and environmentally responsible manner and all personnel are to be suitably qualified and experienced for the nature of the contract.