The scope of the works is the electrical and mechanical dismantling, handling and transport to a storage laydown area of:
n. 59 wind turbine generators Enercon E40 installed in the wind farms of Castiglione Messer Marino (n.44 WTG) and Schiavi d'Abruzzo (n.15 WTG) in Abruzzo region, and
n. 20 wind turbine generators Enercon E40 installed in the wind Farm of Vaglio di Basilicata (PZ).
For each Wind Turbine Generator the following operations are required:
o Disposal of unrecoverable waste material (to be arranged, divided by type, into special roll-off containers);
o Preservative dismantling of the WTG using suitable lifting means, without damaging the interface elements (flanges, bolts, connectors, etc.);
o Disconnection of foundation anchor bolts, cutting them if necessary, without damaging the tower base flange;
o Disassembly of the WTG (both at height and on the ground) and related electrical cabin, and preparation to transportation;
o Loading on suitable transport trucks;
o Transport of WTG components to a storage depot, located in the industrial area of Foggia (IT);
o Unloading of the components at the depot.
All the operations shall be carried out without damaging the components to be recovered.
The Wind Turbine Generators dismounted shall be sold (totally or partially) by the Contracting Entity;
This Qualification System is the subject of design, construction and / or replacement with the redesign of hydraulic profiles, the supply and installation of Francis type hydraulic turbines with power up to 65 MW, as well as ordinary and extraordinary maintenance on these types of machines.
Open procedure 9384/2016 - supply and installation of a backpressure turbine group (TV2) to be installed in the incinerator of Piacenza - CIG n. 6864174F90.
Supply and installation of a backpressure turbine group (TV2) to be installed in the incinerator of Piacenza.
To the formation of any RTI should be noted that the contract is mixed type of delivery / installation and the estimated value for the installation amounts to € 300,000 while the share of the provision amounts to € 2,000,000.
VAG16F002 - supply of turbine meters for cold water for drinking water, single jet meter, mechanical transmission.
The contract concerns the supply and installation of electromechanical equipment for the hydropower plant on the industrial site - Comune di Scurelle.
The Autonomous Province of Trento - APAC - Procurement Service carried out the tender procedure by delegation of the Municipality of Scurelle (TN).
The contract deals with the supply and installation of electromechanical equipment for the hydroelectric power station on industrial wastes.
Equipment must be provided and installed in the Municipality of Scurelle.
The performance of the contract consists of the supply and installation of the turbine, generator, electric switchboards, regulating elements and other supplies and workmanships to enable the hydroelectric power plant to function properly in Scurelle's industrial boom, noting that the building and the pipes were awarded to a suitable company with a separate contract.
The contract also includes post-sales service related to repair work for a minimum period of 24 months (warranty period) to be performed within 48 hours of the fault / malfunction / malfunction reporting by the customer.
The total estimated value for the contract is 306 570 EUR (of which EUR 2 500 for non-declining security charges).
The maintenance of stocks of spare parts owned by the Italian Navy, necessary for the execution of revisions of fourth technical level of the Gas Turbine GE LM 2500, for a total amount of 154 264.68 euros.
Replacing the turbine of the incinerator group of Silea SpA, located in Valmadrera (LC), through the provision and installation, nell'aera the existing plant, a new steam turbine with alternator able to replace the turbine generator group existing, decrepit and not considered more reliable.