Public tenders for lpg in Czech Republic

Find all Energy tenders in the world.
Finding business opportunities has never been easier.

Results for energy. Make a new search!
EnergyLPGCzech Republic

Boletice - Podvore, Polná - LPG gas boiler for solid fuels

Armádní Servisní, příspěvková organizace | Published August 23, 2016
cpvs

The contract is the implementation of greening supply heating, gas boiler 5 incl. new gas boilers, LPG tanks location.

Boletice - Podvore, Polná - LPG gas boiler for solid fuels

Armádní Servisní, příspěvková organizace | Published June 15, 2016
cpvs

The contract is the implementation of greening supply heating, gas boiler 5 incl. new gas boilers, LPG tanks location. LPG gasification boiler room with solid fuel gasification boiler room LPG, solid fuel request for additional information on ZD must be written in the Czech language (in the case of electronic mail sent to the address verejnezakazky@as-po.cz) and the sponsor must be received no later than 6 working days before the deadline for submission of tenders, from the moment of delivery commences ordering deadline 4 working days to respond. Any additional information on the tender conditions will also like ZD, remote access available 24 hours a day on the contracting entity profile https://www.as-po.cz/verejne-zakazky.

Boletice - Podvore, Polná - LPG gas boiler for solid fuels

Armádní Servisní, příspěvková organizace | Published February 3, 2016
cpvs
45000000

The contract is the implementation of greening supply heating, gas boiler 5 incl. new gas boilers, LPG tanks location. LPG gasification boiler room with solid fuel gasification boiler room LPG, solid fuel Description needs to be the fulfillment of public contracts achieved: Greening boilers and heat sources. Modernization of boiler plants will reduce emissions and meet the requirements of Reg. no. 415/2012 Coll. A description of the subject contract: This is a complete dismantling of the original technology in the areas of boilers. In particular boilers for combustion of coal or coke. Newly boiler room equipped with gas fired condensing boiler with an output of a given conversion of heat losses of heated buildings, meeting the emission limits stipulated by Decree 415/2012 Coll., Valid from January 1, 2018. Due to its original boilers with modern condensing technology is the subject of a complete replacement of mechanical equipment of boiler plants (pumps, equithermal control, automatic replenishment system, new water heaters, etc.). The contract also includes the new gas supply to the consumers and the placement of LPG tanks. Description of the relationship between the subject contract and the client's needs: Sponsor is the owner of the technology subject of public procurement and knees Boletice - field - headquarters. In other real estate resources are located in areas of administration AHNM Expected date of fulfillment of the public contract: end 2016

Increasing the number of subscriptions LPG and expansion of controlled parameters (type tests) in carrying out laboratory tests and analysis of fuel samples for the Czech Trade Inspection

Česká obchodní inspekce | Published July 9, 2015
cpvs

Extending carrying out laboratory tests and analyzes of samples of fuels as defined in the Act no. 311/2006 Coll., On Fuels, as amended, and implementing Decree no. 133/2010 Coll., On requirements for fuel, a method of monitoring the composition and fuel quality and their records, as amended, for the period from 1 July 2015 to the end of the performance of a concluded contract on inspection activity between the purchaser and the supplier (executor), ie. on May 2, 2017: a) the presence of manganese test according to DIN EN 590 ( 2014) for diesel, ie. the assumed total number of 2,200 samples for the period from 1 July 2015 to the end of the fulfillment of the Treaty, ie. 05.02.2017, b) providing a sampling of LPG in accordance with Art. 1, paragraph. 1 point. f) of the control activities were always one extra sample case (for each sampling) incl. subsequent storage and disposal of unused testing samples in accordance with Art. 1, paragraph. 1 point. d) of the Treaty that at the destruction there is no discrimination between compliant and non-compliant sample. Thus the test itself plus LPG samples will be carried out only on the express order of the contracting authority. Total will be the collection and disposal of approximately 550 samples per period from 1 July 2015 to the end of the fulfillment of the Treaty, ie. 05.02.2017.

Forklift trucks, works trucks, railway-station platforms tractors

RPG Recycling, s.r.o. | Published October 25, 2016  -  Deadline November 14, 2016
cpvs
42415000

The contract is the delivery of new, unused technology: forklift LPG.

Delivery groomers for stadium Turnov

Městská sportovní Turnov, s.r.o. | Published June 21, 2016
cpvs

The subject of the public contract is the supply of snowmobiles for ice resurfacing to LPG or CNG (even with petrol / LPG) for the ice rink in Turnovo. For details, see Appendix Specifications PISTE CATERPILLARS (machines for ice resurfacing) and the purchase contract Art. I. Subject of the contract. Has laid down the contract value 2,800,000 CZK without VAT as a maximum.

Forklift trucks, works trucks, railway-station platforms tractors

RPG Recycling, s.r.o. | Published January 5, 2017
Winner
Linde Material Handling Česká republika s.r.o.
cpvs
42415000

The contract is the delivery of new, unused technology: forklift LPG.

Forklift trucks - purchase.

Česká republika – Ministerstvo obrany, Centrální nákupní agentura | Published October 14, 2014
Winner
STILL ČR spol. s r.o.Štěrboholská 102, čp. 1387Praha 10-Hostivař 102 19
cpvs
42415110

The deliverable is the acquisition of 22 units of forklifts motor secondary to LPG.

Forklift trucks - purchase

Česká republika - Ministerstvo obrany, Centrální nákupní agentura | Published October 9, 2014
cpvs

The deliverable is the acquisition of 22 units of forklifts motor secondary to LPG.

Forklifts - purchase

Česká republika - Ministerstvo obrany, Centrální nákupní agentura | Published March 26, 2014
cpvs

The deliverable is the purchase of 22 units of forklifts motor secondary to LPG, 1 pc side electric forklift multicast Pedestrian and 1 side multidirectional electric forklift with telescopic cabin. Acquisition of 22 units of forklifts medium-sized motor to LPG. Purchase of 1 unit side electric forklift truck multicast manually maintained. Purchase of 1 unit side electric forklift truck with retractable multicast cabin.

Standard volumetric flow of liquids in a mobile configuration 3

Český metrologický institut | Published September 19, 2013
Winner
Endress+Hauser Czech, spol. s r.o.Olbrachtova 2006/9Praha 4 140 00 +420 241080463
cpvs
38421000

The subject of procurement is the purchase of the standard volumetric flow of liquids in mobile and Ex version with measurement of volume and mass flow of liquids, including LPG and oil and evaluation of measurement using the method of double time (double timepieces method). The device will be designed for the following activities: - Calibration of flow meters and flow volume of liquids other than water, including oil - calibration standards for calibration and verification of measuring instruments designed to measure the LPG. Detailed technical specifications were listed in Annex 2 to the specifications.

Standard volumetric flow of liquids in a mobile version 3

Český metrologický institut | Published September 17, 2013
cpvs

The subject of procurement is the purchase of the standard volumetric flow of liquids in mobile and Ex version with measurement of volume and mass flow of liquids, including LPG and oil and evaluation of measurement using the method of double time (double timepieces method). The device will be designed for the following activities: - Calibration of flow meters and flow volume of liquids other than water, including oil - calibration standards for calibration and verification of measuring instruments designed to measure the LPG Detailed technical specifications were listed in Annex 2 to the specifications.

Forklifts - purchase

Česká republika - Ministerstvo obrany, Centrální nákupní agentura | Published January 23, 2014
cpvs
42415110

The deliverable is the purchase of 22 units of forklifts motor secondary to LPG, 1 pc side electric forklift multicast Pedestrian and 1 side multidirectional electric forklift with telescopic cabin. Middle of truck engine with LPG drive and controlled katalyzárorem multi-directional electric side loader manually driven multi-directional electric side loader with telescopic cab Justification effectiveness of public contracts pursuant to § 86 paragraph 2 AWD: A) The public contract is a variation of the transport and handling of funds - forklifts to increase security levels stored economy and quality of stored material and ammunition. B) Acquisition of 22 units of forklifts secondary motor on LPG, 1 pc side electric forklift truck multicast hand-guided and 1 side of a multicast electric forklift truck with retractable cabin. C) The aim is to provide comprehensive logistics support. D) Expected date of fulfillment of public contracts is the 30th November 2014.

Forklifts - purchase.

Česká republika – Ministerstvo obrany, Centrální nákupní agentura | Published March 28, 2014  -  Deadline May 20, 2014
cpvs
42415110

The subject of the acquisition of the 22 pieces of secondary motor forklift LPG, 1 pc side electric forklift multicast pedestrian and 1 pc side electric forklift multicast pull-out cabin.

handling

WAREX spol. s r.o. | Published August 3, 2016
cpvs

The subject of delivery in the tender is handling the manufacturing plant in Javornik incl. transportation, any installation, commissioning and training in the necessary instructions. The tender allows only a completely new device. These are: 2 pieces forklift load capacity 3.5 tons (1 pc LPG, diesel powered 1 pc) 3 pieces of hand pallet trucks (1 pc capacity 2.5 tons, 2 pcs capacity 2 tons), 2 pieces pedestrian stacker trucks electric lifting and trolley carrying capacity 1 ton

Objemový etalon průtoku kapalin v mobilním provedení 3.

Český metrologický institut (00177016) | Published May 8, 2013  -  Deadline June 10, 2013
cpvs
38421000

Předmětem veřejné zakázky je pořízení objemového etalonu průtoku kapalin v mobilním a Ex provedení s možností měření objemového i hmotnostního průtoku kapalin včetně LPG a ropy a vyhodnocením měření pomocí tzv. metody dvojího času (double chronometry method). Zařízení bude určeno k následující činnosti: — kalibrace a ověřování měřidel průtoku a proteklého množství kapalin jiných než voda včetně ropy, — kalibrace etalonů pro kalibrace a ověřování měřidel určených k měření LPG. Podrobná technická specifikace je uvedena v Příloze k Zadávací dokumentaci.

Objemový etalon průtoku kapalin v mobilním provedení 2.

Český metrologický institut (00177016) | Published March 2, 2013  -  Deadline April 18, 2013
cpvs
38421000

Předmětem veřejné zakázky je pořízení objemového etalonu průtoku kapalin v mobilním a Ex provedení s možností měření objemového i hmotnostního průtoku kapalin včetně LPG a ropy a vyhodnocením měření pomocí tzv. metody dvojího času (double chronometry method). Zařízení bude určeno k následující činnosti: — kalibrace a ověřování měřidel průtoku a proteklého množství kapalin jiných než voda včetně ropy, — kalibrace etalonů pro kalibrace a ověřování měřidel určených k měření LPG. Podrobná technická specifikace je uvedena v Příloze k Zadávací dokumentaci.

Supply forklift

Značky Morava, a.s. | Published June 20, 2016
cpvs

Delivery 1 piece LPG truck powered by propane. The contract in question is not carried out according to law no. 137/2006 Coll., On Public Procurement, as amended. According to § 2 e) of the Act no. 320/2001 Coll., On financial control in public administration, as amended, the selected contractor is obliged to cooperate in the performance of financial control.

Objemový etalon průtoku kapalin v mobilním provedení.

Český metrologický institut (00177016) | Published February 7, 2013  -  Deadline March 25, 2013
cpvs
38421000

Předmětem veřejné zakázky je pořízení objemového etalonu průtoku kapalin v mobilním a Ex provedení do 3,5 t s možností měření objemového i hmotnostního průtoku kapalin včetně LPG a vyhodnocením měření pomocí tzv. metody dvojího času (double chronometry method). Součástí dodávky bude – veškerá procesní instrumentace (měření tlaku, teploty a hustoty kapaliny) – vyhodnocovací a řídicí jednotka (flow computer) – vybavení nezbytné ke kalibraci etalonu – podvozek pro přepravu zařízení. Minimální průtok: maximálně do 0,4 m3/h. Maximální průtok: minimálně od 398 m3/hRozsah hustoty: minimálně (500 až 1 200) kg/m3. Rozsah teploty: minimálně (0 až 80) °C. Pracovní tlak: minimálně 4,9 MPa. Nejistota měření: lepší než 0,05 % z měřené hodnoty.

Standard water flow up to 60 m3 / h

Český metrologický institut | Published July 21, 2016
cpvs
38421000

1) Supply of standard water flow (the "facility") with the following basic parameters: Flow range: min. 0.001 to 60 m3 / h flow rate with stability better than 1% water Temperature range: min. 10-85 ° C measured in the range of gauges: DN 10 to DN 65 Volume method with a plunger into the flow min. 5 m3 / h Mass method with weights to flow min. 60 m3 / h More detailed device parameters are in the annex to the tender documentation. 2) Installation in prepared areas and launching 3) Staff training 4) Delivery documentation and user manuals devices aim is to ensure: - continuity of reference and secondary standards of water flow, - continuity standards CMI (mass flowmeters in the areas of testing LPG and cryogenic liquids , reference standards for functional testing AMS, or other standards as needed) - the reference device for comparison (international interlaboratory, in the context of a bilateral assessment module MID, etc.) - the calibration and verification of measuring instruments for maintenance of liquid water with MPE (0.2 0.3)% (for example, mass flow meters, etc.) - special tests for type approval by MID Annex MI-001, MI-004 and MI-005 1) Delivery of the standard water flow (the "facility") with the following basic parameters: flow range: min. 0.001 to 60 m3 / h flow rate with stability better than 1% water Temperature range: min. 10-85 ° C measured in the range of gauges: DN 10 to DN 65 Volume method with a plunger into the flow min. 5 m3 / h Mass method with weights to flow min. 60 m3 / h More detailed device parameters are in the annex to the tender documentation. 2) Installation in prepared areas and launching 3) Staff training 4) Delivery documentation and instructions, equipment Acquisition of the public contract fully ensure the above-described needs of the client. Sponsor assumes that the contract will be fulfilled within 9 months from the completion of the tender and signed the contract with the successful bidder.