Call +44 800 9755 164

Public tenders for energy in Ireland

Find all Energy tenders in the world.
Finding business opportunities has never been easier.

Results for energy. Make a new search!
EnergyIreland

Energy-efficiency consultancy services

Sustainable Energy Authority of Ireland | Published December 28, 2016

This is a prior information notice (PIN) in relation to support services for EPBD (BER/DEC) for SEAI Development and Delivery. SEAI intends to appoint a panel of service providers who wish to participate in a framework agreement for the provision of both technical and quality assurance services to support BER/DEC governance activities and EPBD technical development. The total estimated annual value of this contract is 240 000 EUR. The contract term will be for a maximum of 3 years. Please do not respond to this notice. It is a Prior information notice only. Further information, when it becomes available, will be published on www.etenders.gov.ie

Lithium accumulators

Electricity Supply Board and/or its Subsidiaries, Associates and Joint Venture Partnerships (hereinafter referred to as ESB) | Published December 23, 2016  -  Deadline January 27, 2017

Supply of Battery Energy Storage System for Demand Side Response Framework

This framework is for the purchase of a number of battery energy storage systems which are to be deployed at the sites of large industrial / commercial customers in Great Britain (GB) and Ireland. These industrial sites are already included in an aggregated Demand Response Portfolio. The battery energy storage systems will be integrated into and operated within the customers Demand Control System and an aggregated Demand Response Portfolio. The Battery Energy Storage system will be located ‘behind the meter’ and each system will be typically 0.5MW — 5MW in size dependant on the load and grid connection of the customer.

For more information please refer to the information memorandum.

Supply of Battery Energy Storage System for Demand Side Response Framework.

Technical Consultancy Services - Electricity Networks Regulation

Commission for Energy Regulation | Published January 20, 2017  -  Deadline February 10, 2017
The Commission for Energy Regulation (CER) is Ireland’s independent energy and water regulator. The CER was established in 1999 and now has a wide range of economic, customer protection and safety responsibilities in energy. The CER is also the regulator of Ireland’s public water and wastewater system. The CER’s primary economic responsibilities in energy cover electricity generation, electricity and gas networks, and electricity and gas supply activities. As part of its role, the CER jointly regulates the all-island wholesale Single Electricity Market (SEM) with the Utility Regulator in Belfast. The SEM is governed by a decision-making body known as the SEM Committee, consisting of the CER, the Utility Regulator and an independent member. The overall aim of the CER’s economic role is to protect the interests of energy customers. The CER has an important related function in customer protection by resolving complaints that customers have with energy companies.
The CER currently wishes to engage consultancy support to provide technical expertise and support on all areas of electricity networks regulation including both electricity transmission and distribution.
The consultancy support will require expertise in key areas including:
•	Resolutions of Connection Disputes
•	Grid Code and Distribution Code Derogations Applications and Modifications
•	European Network Code on Requirements for Grid Connection Applicable to all Generators
•	Regulated Charging
•	Generation Connection Issues
•	Connection Policy
•	Transmission and Distribution Capex and Opex Revenues and Distribution Use of System (DUoS) and Transmission Use of System (TUoS) – Review of plans and submissions.
•	Licence Compliance Monitoring - Review of submission of technical codes etc
A detailed specification of requirements is set out in Section 2 of Appendix 1.
Tender document available to download from www.etenders.gov.ie


Type of Contract:
Services

Qualification System - Electric Ireland Smarter Living

Achilles Procurement Services Ltd | Published December 2, 2015  -  Deadline January 29, 2017
Electric Ireland’s Energy Services division will continue to develop new innovative
product and service offerings to deliver to Customers. To do this the team will take
two approaches:
1. Electric Ireland or one of its agents will engage with firms / parties with
innovative products and service offerings that Electric Ireland would work with to
modify and/or customize to meet the needs of the Irish market.  The purpose of
Electric Ireland engaging with such firms / parties will be to trial the product or
service in an end user environment in order to prove all aspects of the proposition
and/or to establish the most appropriate way to deliver such a product or service.
This may include adding it to, or integrating it with other offerings to provide it as
part of Electric Irelands overall product or service offering, which may be fully
branded as an Electric Ireland product or service.
2. Electric Ireland will continue to engage with firms / parties who can provide
proven Smart products and services, which are already fully developed, tested
and proven propositions and are already being offered to market.
This notice addresses the first of the two approaches described above and
therefore Electric Ireland is seeking expressions of interest from firms / parties of
products and services which can support our Smarter Living innovation
developments. In order to qualify for consideration for this programme, Electric
Ireland has chosen to use Supply-Line the Qualification System
operated by Achilles for vendor management of the parties interested in being
considered.
Requirements: Supply-Line, the vendor management system operated by Achilles
Procurement Services will be used as the qualification system for the potential
award of contracts for supply of Smart Homes and Buildings product and service
offerings including microgeneration and energy storage solutions, as and when
they arise.
Please refer to the documentation available to download from etenders.

Advertising and marketing services

Electricity Supply Board ( ESB ) | Published December 21, 2016  -  Deadline January 27, 2017

ESB is requesting proposals from organisations capable of providing marketing support services to support the market entry of our new subsidiary ( codenamed ‘Project Arrow’, which will initially enter the Dual Fuel Residential segment of the Energy Supply market in Great Britain i.e. England, Scotland and Wales). The key services and areas of importance are as follows:

— Marketing Planning.

— Creative Services — ATL, BTL and Digital.

— Digital campaigning.

o Optimisation

o SEO

o PPC

o Analytics

o Social media advertising and content

o Email marketing

— Account Management.

— Remuneration and Costs.

— Third party costs.

— Sub Contactors.

— Cost control.

ESB is requesting proposals from organisations capable of providing marketing support services to support the market entry of our new subsidiary ( codenamed ‘Project Arrow’, which will initially enter the Dual Fuel Residential segment of the Energy Supply market in Great Britain i.e. England, Scotland and Wales). The key services and areas of importance are as follows:

— Marketing Planning.

— Creative Services — ATL, BTL and Digital.

— Digital campaigning.

o Optimisation

o SEO

o PPC

o Analytics

o Social media advertising and content

o Email marketing

— Account Management.

— Remuneration and Costs.

— Third party costs.

— Sub Contactors.

— Cost control.

Interested parties should note that this selection process is not governed by the provisions of Directive 2004/18/EC of the European Parliament and of the Council or Directive 2004/17/EC of the European Parliament and of the Council or Directive 2014/14/EU of the European Parliament and of the Council (or the Irish regulations transposing those Directives) and ESB does not intend to follow the procedures or rules set out in those Directives/Regulations in this selection process.

Thermal insulation work

Dublin City Council | Published December 24, 2016  -  Deadline January 30, 2017

Energy Efficiency Retrofitting will be carried out Dublin City Council owned residential properties. The tender comprises of 5 Lots based on Dublin City Council Administrative Areas. Subject to to there being sufficient responses it is envisaged that up to 10 operators may be appointed for each of the 5 frameworks. Tenderers can apply for inclusion in one, some, or all lots.

For further information please refer to tender documentation available to download on www.etenders.gov.ie RFT ID 112562.

Energy Efficiency Retrofitting will be carried out Dublin City Council owned residential properties. The tender comprises of 5 Lots based on Dublin City Council Administrative Areas. Subject to to there being sufficient responses it is envisaged that up to 10 operators may be appointed for each of the 5 frameworks. Tenderers can apply for inclusion in one, some, or all lots.

Within each framework work will be allocated in tranches of 5 to 15 houses (average 10). Please see Volume A Statement of Requirements and Framework Agreement for use with Term Maintenance and Refurbishment Works Contract for further information.

A Bill of Quantities (Volumn C- Pricing Documentation) has been prepared based on the profile of the housing stock in each lot. The overall average requirement for each service (across the 5 lots is as follows:

External Wall Insulation* 78 % of properties.

Internal Wall Insulation (dry-lining) 17 % of properties.

Window Replacement 20 % of properties.

Attic Insulation 100 % of properties.

Cavity Insulation 5 % of properties.

* External Wall Insulation Breakdown Mid-terrace to End terrace 3 to 1.

All work carried out and materials provided are to be compliant with the specifications available at:

https://www.nsai.ie/S-R-54-2014-Code-of-Practice.aspx

http://www.seai.ie/Grants/Better_energy_homes/contractor/QADP.pdf

http://www.rebelenergy.ie/ce17.pdf

Please Note that it is expected that works will take place in occupied dwellings.

Optical microscopes

Royal College of Surgeons in Ireland | Published January 14, 2017  -  Deadline February 13, 2017

Light Sheet Fluorescence Microscope for the application with live and optically cleared biological samples.

Specifications for a Light Sheet Fluorescence Microscope (LSFM) for the application with live and optically cleared biological samples.

1. Product Description: Light Sheet Fluorescence Microscope (LSFM) system capable to image live and optically cleared sample, fully automated and computer controlled. The instrument will be part of a multidimensional imaging facility in RCSI.

2. Product Requirement: This product is required for live sample fluorescence imaging and imaging of fixed specimen, which will be mostly optically cleared. Particular applications will use live and fixed samples expressing one or more GFP fusion proteins, which in the case of live samples may act as fluorescence resonance energy transfer partners. The equipment should allow long term observation of living samples, which requires the control of incubation parameters inside the imaging chamber (temperature, CO₂, O₂, perfusion). The application has to be flexible with regards to the spectra of the probes used. Therefore a big number of different beam splitters and filters and the possibility of an on-site exchange or other technical solutions to increase flexibility and sensitivity are appreciated.

Please also refer to the uploaded document for more details on the performance of the instrument.

  • 1