Public tenders for gas in Finland

Find all Energy tenders in the world.
Finding business opportunities has never been easier.

Results for energy. Make a new search!
EnergygasFinland

Women's Bay Power Plant Flue Gas Condensing Plant

Tampereen Energiantuotanto Oy | Published May 21, 2014  -  Deadline June 5, 2014
cpvs
42160000, 42996000, 42514000

Tampere Energy Ltd is planning to built a flue gas condensing and heat recovery plant for district heat production to it's 200 MW (fuel) Women's Bay power plant in Tampere, Finland. The power plant uses woodships and peat as fuel. The delivery of CONSIST: - Flue gas condensing equipment, - duct works from existing ERP flue gas duct to flue gas condenser and to the stack needed including dampers, - flue gas booster fan - condensate cleaning equipment - building for flue gas condensing and condensate cleaning equipment - automation and instrumentation of the plant, - electrification of the plant.

GAS CHROMATOGRAPH

Teknologian tutkimuskeskus VTT | Published June 12, 2014  -  Deadline June 27, 2014
cpvs
38000000, 38432210

The objective of the tender process is to find a professional supplier for a high-quality gas chromatograph. The objective is to find a professional supplier that can guarantee a high standard of quality. VTT Technical Research Centre of Finland will choose one supplier from among the tenderers. Please submit your tender in accordance with the invitation to tender and the accompanying documents. Tender documents will be sent by email on request from VTT Register office. Please address the request to kirjaamo@vtt.fi

Gas compressors

Baltic Connector Oy | Published November 22, 2017
Winner
Markkinaoikeus
cpvs
42123100, 42123000, 51134000, 42100000

The scope of the contract covers the supply of equipment and materials of the electric motor driven natural gas (NG) pipeline turbo compressor unit together with services listed in the procurement documents.

The scope of the contract covers the supply of equipment and materials of the electric motor driven NG pipeline turbo compressor unit together with services listed in the procurement documents. The nominal capacity of the unit is 300 000 Nm3/hour.

KYVO3, Flue Gas Condensing Plant

Lahti Energia Oy | Published April 15, 2016  -  Deadline May 6, 2016
cpvs
42160000, 42514000, 42996000

Lahti Energia Oy will construct a combined heat and power (CHP) plant on the site of Kymijärvi located at the city of Lahti with the fuel firing input capacity of 170 MW using wooden biomass and peat and coal as spare fuel.

This procurement concerns a Flue Gas Condensing (FGC) Plant including scrubber and/or flue gas condenser, combustion air humidifier and multi-stage condensate cleaning system to produce demineralized makeup water for the boiler and needed auxiliary systems and equipment.

Industriell gas samt hyrning av industriflaska

Optima | Published October 7, 2015  -  Deadline October 19, 2015
cpvs
24110000

Industriell gas samt hyrning av industriflaska using in Undervisning at the Optima.

WtE flue gas treatment

Lounavoima Oy | Published May 30, 2018  -  Deadline June 20, 2018
cpvs
42514000

Negotiation procedure, which will be published in advance Call for tenders Will be specified in the Appendices Lounavoima Oy is planning to construct a new waste to energy (WTE) CHP plant at Korvenmäki, Salo. The new CHP plant will be located at the greenfield site adjacent to the existing Municipal landfill site. Korvenmäki WtE plant is going to use the source municipal waste (MSW) as the main fuel. The new Plant will be designed for 120,000 t / a waste fuel. The combustion and heat recovery technology is based on grate boiler technology. The WtE plant will be purchased in 6 packages (LOTs). The object of this procurement is LOT2. LOT2 Purchase package includes: Semi-Dry flue gas cleaning plant, Flue gas scrubber / condenser, ID fan and silencer, Stack, Demineralized water treatment plant and Waste water treatment plant for flue gas condenser. Notice that all times presented are Eastern European Summer Time (Helsinki, Finland; UTC / GMT +3 hours). List of Selection Criteria and Their Short List of Selection Criteria and Their Short Negotiation Procedure, which will be published in advance for a call for competition

Services incidental to gas extraction

Gasum Oy | Published January 24, 2017  -  Deadline February 6, 2017
cpvs
76110000

Gasum is a Finnish energy company and the number 1 expert in the gas sector in Finland. Gasum imports natural gas to Finland and upgrade 100 % Finnish renewable bio-gas for our customers for energy production, industry, homes as well road and maritime transport. Thanks to Gasum's nationwide network of biogas plants, Gasum is Finland's leading provider of bio-gas and processor of biodegradable waste fractions. Gasum is also developing the Nordic LNG market with Gasum's subsidiary Skangas. Gasum is a fully state-owned company.

Gasum is planning to increase the mobile LNG-vaporizer capacity to be used for the spare fuel supply in the possible emergency or other network shut-down cases.

This procurement notice is issued for the purchase of a portable 1 unit LNG Vaporization System.

The detailed description of the scope of the supply can be found from the RFT documents behind the link.

The procurement is governed by the Finnish Act on Utilities Procurement (Act 1398/2016) and the Directive 2014/25 coordinating the procurement procedures of entities operating in the water, energy, transport and postal services sectors (‘Utilities' Procurement Directive’). The estimated total value of the procurement therefore exceeds the threshold set in section 13 of the Finnish Act on Utilities Procurement (Act 1398/2016). The threshold for supply and service contracts is 414 000 EUR.

The object of the procurement is Portable LNG Vaporization System. The vaporizing capacity of the units (systems) in focus will be 100 MW. The connection point is to the natural gas network, typically at pressure level of 10 barg. The unit shall be designed for operation 24 hours per day, and at minimum for 3 months without interruption.

The requested vaporizer shall be based on water bath vaporizer. Vaporizer shall be equipped with gas fuelled heaters. Boiler is integrated as one module with vaporizer or separate boiler unit. For example electric heaters, ambient air vaporizer as a vaporizer's main heater are excluded. Vaporizing of the LNG shall be done in the water bath, which is indirectly heated by the gas fuelled heaters. The vaporizer's water bath and boiler can be integrated as a one module. If the vaporizer's water bath and boiler are their own modules, unit shall be transported with one truck trailer.

Latest time for the delivery at site is in the end of the year 2017.

The procurement contract will include a 2-year guarantee period. No long-term maintenance agreement or similar is included in this procurement.

The procurement shall be conducted by following the limited procedure. The criteria used in the award decision will be the most advantageous technical-economical tender. The criteria used to assess is stated in the RFT material behind the link.

The minimum technical requirements for the requested transportable LNG vaporizer systems are in the document 101004168-001-F0001 behind the link.

Naistenlahti Power Plant, Flue Gas Condensing Plant

Tampereen Energiantuotanto Oy | Published December 18, 2014
Winner
Valmet Power Oy
cpvs
42160000, 42514000, 42996000

Tampereen Energiantuotanto Oy will build a flue gas condensing and heat recovery plant for district heat production to it's 200 MW(fuel) Naistenlahti power plant in Tampere, Finland.

University of Helsinki: Thermogravimeter with evolved gas analysers, 2015

University of Helsinki | Published September 22, 2015  -  Deadline November 4, 2015
cpvs
38000000

Thermogravimeter and evolved gas analysis equipment. Used for analysing mass changes of materials occurring during heating of the sample, and analyzing simultaneously evolving gases and other species.

University of Helsinki: Thermogravimeter with evolved gas analysers, 2015.

University of Helsinki | Published September 25, 2015  -  Deadline November 4, 2015
cpvs
38000000

Thermogravimeter and evolved gas analysis equipment. Used for analysing mass changes of materials occurring during heating of the sample and analysing simultaneously evolving gases and other species.

GAS CHROMATOGRAPH TRIPLE QUADRUPOLE MASS SPECTROMETER

Puolustusvoimat | Published April 2, 2015  -  Deadline May 12, 2015
cpvs
38000000

1 KPL GAS CHROMATOGRAPH TRIPLE QUADRUPOLE MASS SPECTROMETER 1 KPL PC (WORKING STATION) 1 KPL PRINTER 1 KPL MONITOR 1 KPL LICENSE COSTS (FROM 10 YEARS TIME) 1 KPL INSTALLATION AND USER TRAINING 1 KPL ADDITIONAL TRAINING

Gas analyzer for the measurement of stable carbon isotope ratios of methane and carbon dioxide

Helsingin yliopisto | Published December 22, 2017  -  Deadline January 10, 2018
cpvs
38430000

High Precision Gas Analyzer. Methane (CH4) and carbon dioxide (CO2), as well as atmospheric concentrations of methane, carbon dioxide and water vapor (H2O), should be able to measure the stable carbon isotope ratios (δ13C). The analyzer will be deployed in ecosystem gas exchange in tree and soil chamber measurements. High Precision Gas Analyzer. Methane (CH4) and carbon dioxide (CO2), as well as atmospheric concentrations of methane, carbon dioxide and water vapor (H2O), should be able to measure the stable carbon isotope ratios (δ13C). The analyzer will be deployed in ecosystem gas exchange in tree and soil chamber measurements.

Gas compressors

Baltic Connector Oy | Published April 26, 2017  -  Deadline May 15, 2017
cpvs
42123100, 42123000, 51134000, 42100000

The scope of the contract covers the supply of equipment and materials of the electric motor driven natural gas (NG) pipeline turbo compressor unit together with services listed in the procurement documents.

The scope of the contract covers the supply of equipment and materials of the electric motor driven NG pipeline turbo compressor unit together with services listed in the procurement documents. The nominal capacity of the unit is 300 000 Nm3/hour.

The procurement covers the following supplies and services:

Supplies:

— design, manufacture, inspection, testing and delivery of electrical and mechanical equipment, materials and components.

Services:

— design of electrical and instrumentation cables between skids,

— installation of delivered units/skids,

— mechanical, electrical and instrumentation installation inside the units/skids,

— tests and inspections in factory,

— preservation, packing, marking and shipping,

— storing at the factory and at the site,

— tests and inspections at site,

— site service for supervision, commissioning, start-up of equipment,

— documentation and certification,

— training of client's operation and maintenance personnel at site inclusive of all training material,

— mobilization/demobilization,

— commissioning, start-up spares and special tools,

— additional site service (according to daily rate).

The supplies and services will be described in more detail in the specifications which will be provided to the candidates invited to the negotiations.

Gas filters

Baltic Connector Oy | Published May 18, 2017  -  Deadline June 6, 2017
cpvs
42514320, 42514000

The scope of the contract covers the supply of equipment and materials of the Centrifugal Scrubber and the Filter Separators for Balticconnector project in Finland with services listed in the procurement documents.

The scope of the contract covers the supply of equipment and materials of the Centrifugal Scrubber and the Filter Separators for Balticconnector project in Finland with services listed in the procurement documents. Module G or H1 shall be applied for conformity assessment according to directive 2014/68/EC (PED) of the European Parliament and of the Council. The procurement covers the following supplies and services:

Supplies

— centrifugal scrubber (1 pcs),

— filter separators (2 pcs).

Scrubber and separator deliveries covering supporting frame and required auxiliaries such as ball valves, blind flanges, plugs, bolting, gaskets for vents and drains.

Design data for supplies:

— material: carbon steel,

— design pressure 80 bar, design min temp. C -40,

— fluid type: natural gas, nominal flow rate: 300 000 Nm3/h,

Services:

— tests and inspections in factory,

— preservation, packing, marking and shipping,

— storing at the factory,

— documentation and certification,

— delivery to the delivery address (Inkoo, Finland),

— other services necessary for the completion of the supply scope.

The supplies and services will be described in more detail in the specifications which will be provided to the Candidates invited to the negotiations.

Construction work for gas pipelines

Baltic Connector Oy | Published May 18, 2017  -  Deadline May 29, 2017
cpvs
45231220, 45231110, 45231200, 45231100, 45244100, 71630000, 45120000

Baltic Connector Oy and Elering AS are planning to construct the Balticconnector pipeline, a bi-directional natural gas pipeline to connect Finland and Estonia.

The scope of the contract includes management, engineering, construction of seabed intervention and offshore pipeline construction works and pre-commissioning:

This is a joint procurement of Baltic Connector Oy and Elering AS. Baltic Connector Oy is the contracting authority responsible for carrying out the procurement procedure. Baltic Connector Oy and Elering AS have signed a co-operation agreement on joint procurement of the works covered by this procurement procedure. According to the agreement Baltic Connector Oy will be responsible for scheduling, design and overall management of the procurement procedure. However, the works shall be provided to both Baltic Connector Oy and Elering AS.

Kouvola B Fuel Governor upgrade for PGT10DLN Gas Turbine

Gasum Oy | Published February 23, 2017  -  Deadline March 15, 2017
cpvs
42960000

Limited company (Ltd. or Plc.) Or equal in KOMPA project the automation systems of the Kouvola B will be upgraded. The present Unit Control System (UCS) of the gas turbine (type PGT10DLN) driven compressor unit will be Replaced with a new FG system and major part of the unit level auxiliary and valve control functions residing now in the UCS will be Transferred to the existing Station Control System (SCS), Which will be extended. The new FG will be integrated with the SCS and to the existing compressor Antisurge System and site Load Sharing System for Tendering The subject is Gasum Oy Kouvola Compressor Station B (Kouvola B) Gas Turbine Fuel Governor (FG). In KOMPA project the automation systems of the Kouvola B will be upgraded. The present Unit Control System (UCS) of the gas turbine (type PGT10DLN) driven compressor unit will be Replaced with a new FG system and major part of the unit level auxiliary and valve control functions residing now in the UCS will be Transferred to the existing Station Control System (SCS), Which will be extended and the maximum: 5 requirements in the contract documents specified in accordance with the Limited company (Ltd. or Plc.) or equal

FTIR-BASED MULTICOMPONENT EXHAUST GAS ANALYSER

VTT Technical Research Centre of Finland Ltd | Published June 10, 2015  -  Deadline June 26, 2015
cpvs
38500000

VTT is requesting for a quotation for a complete packet of FTIR-based multicomponent exhaust gas analyser with 0.5 cm-1 resolution including sampling system, methods, references, and introduction training for the new instrument. The different parts/components (e.g. sampling system, methods, references, training) should be itemized in the quotation. Our exhaust gas measurements cover wide variety of conditions, applications and fuels • a variety of conditions including cold start, hot start, driving cycles, different ambient temperature etc. • a very broad variety of vehicles, motors, and machines in different locations requires measuring system to be transferable. • a variety of fuels from experimental fuels to commercially available fuels, e.g. gasoline, diesel, methane, ethanol, biodiesel, HFO, LFO, ED95, methanol and DME Minimum requirements: - Resolution is 0.5 cm-1, - 1 Hz measurement capability, - FTIR equipment must be transferable with sufficiently large wheels, - The equipment will include ready-made methods, at least by diesel, gasoline, and E85 fuels. Diesel method should include HNCO. The technical specification of the equipment to be supplied is discussed in more detail in the invitation to tender.

Flue gas cleaning and heat recovery system

Fortum Power and Heat Oy | Published May 15, 2014  -  Deadline June 2, 2014
cpvs
42164000

Fortum Power and Heat Oy is planning to build a flue gas scrubber type cleaning and heat recovery system to it's 180 MW (fuel) Power Plant in Joensuu, Finland. Power Plant uses biomass and peat as fuel. Purpose of the flue-gas cleaning and heat recovery system is primary to produce heat to the district heating network and secondary to Reduce sulfur dioxide and dust emissions. Delivery will be turn-key delivery up from the foundation Which is in Purchaser's scope. If you are interested Tendering to login to participate, please leave your application by 02 June 2014 at 09:00 Finnish time to petteri.malinen @ fortum.com. In the application please Inform the following: 1 Participating company's official name and ID number 2 Main references According to III.2.3 3 Contact information (contact person and e-mail address) where to deliver the offer request. 4 Balance sheet According to III.2.2) RFQ will be delivered to accepted applicants in early June 2014. Preliminary project schedule: • Leaving the offers mid August 2014 • Contract negotiations The August-September 2014 • Contract signed in 2014 Sebtember • Take-over delivery of the Autumn 2015 Investment has no decision yet of execution and the final decision will be made based on Profitability calculation is the basis of the offers we receive now.

Gas cooling systems

Baltic Connector Oy | Published May 18, 2017  -  Deadline June 6, 2017
cpvs
31161200

The scope of the contract covers the supply of equipment and materials of the air-cooled heat exchanger unit for compressor and metering station for Balticconnector project in Finland together with services listed in the procurement documents.

The scope of the contract covers the supply of equipment and materials of the air-cooled heat exchanger unit for compressor and metering station for Balticconnector project in Finland together with services listed in the procurement documents. Module G or H1 shall be applied for conformity assessment according to directive 2014/68/EC (PED) of the European Parliament and of the Council.

The procurement covers the following supplies and services:

Supplies:

— air-cooled heat exchanger, supporting frame, electrical motors, transmissions and required auxiliaries such as ball valves, blind flanges, plugs, bolting, gaskets for vents, drains and junction boxes,

— design pressure 80 bar, design min temp. C -40,

— fluid type: natural gas, nominal flow rate: 300 000 Nm3/h.

Services:

— tests and inspections in factory,

— preservation, packing, marking and shipping,

— storing at the factory,

— documentation and certification,

— delivery to the delivery address (Inkoo, Finland),

— other services necessary for the completion of the supply scope.

The supplies and services will be described in more detail in the specifications which will be provided to the Candidates invited to the negotiations.

Gas pipelines

Baltic Connector Oy | Published May 3, 2017  -  Deadline May 29, 2017
cpvs
44161100, 44161400, 44161500, 44160000, 44161000

Baltic Connector Oy and Elering As are planning to construct the Balticconnector Pipeline, a bi-directional natural gas pipeline to connect Finland and Estonia.

This procurement procedure covers the supply of line pipe completed with internal flow coating, external corrosion coating, concrete weigh coating including supply and installation of aluminum anodes on part of the line pipes.

This is a joint procurement of Baltic Connector Oy and Elering AS. Baltic Connector Oy is the Contracting Authority responsible for carrying out this procurement procedure. Baltic Connector Oy and Elering AS have signed a co-operation agreement on joint procurement of the supplies covered by this procurement procedure. According to the agreement Baltic Connector Oy will be responsible for scheduling, design and overall management of the procurement procedure. However, the supplies shall be provided to both Baltic Connector Oy and Elering AS.

This procurement procedure covers the supply of line pipe completed with internal flow coating, external corrosion coating, concrete weigh coating including supply and installation of aluminum anodes on part of the line pipes.

The main properties of the pipelines are described below:

— 20” line pipes — OD x wt: 508 mm x 15.9 mm — In accordance with DNV-OS-F101, and supplementary Client requirements,

— Line pipe manufacturing process: HFW,

— Line pipe material grade DNV HFW 450,

— Internal Epoxy Flow Coating,

— External 3LPE Corrosion Coating,

— External Concrete Weight Coating,

— Pipe Grade F D,

— Aluminium bracelet anodes,

— Pipe Length 77.2 km (an estimate) + contingencies [1 354 m],

— Material for weld procedure qualifications.

The scope of work associated with the delivery of the line pipe materials includes:

— Project management and engineering, including manufacturing procedures and associated quality plans and ITP’s;

— Procurement of raw line pipe carbon steel material;

— Line pipe manufacturing and testing;

— Internal flow coating of line pipes;

— External anti-corrosion coating of line pipes;

— Concrete weight coating of line pipes;

— Supply and installation of aluminium brace anodes embedded in the concrete weight coating;

— Application of external corrosion coating and associated testing;

— Delivery to the selected harbour and unloading to keel side;

— Other related services necessary for completing the scope of work.

The scope will be described in more detail in the technical specifications and other documents which will be provided to the candidates invited to the negotiations.

The construction services (seabed intervention works and pipe line installation works and pre-commissioning) of the offshore pipeline will be procured separately.