Public tenders for flow-meter in Finland

Find all Energy tenders in the world.
Finding business opportunities has never been easier.

Results for energy. Make a new search!

flow Meter

Pohjois-Karjalan sairaanhoito- ja sosiaalipalvelujen kuntayhtymä | Published February 4, 2016  -  Deadline February 26, 2016
cpvs
33100000

North Karelia Hospital District to request a quotation from a single flow meter used in vascular surgery. The equipment is measured in vascular blood flow rate of the blood vessels during surgery.

Flow meters and imuinjektorit

IS-Hankinta Oy | Published August 26, 2016  -  Deadline October 6, 2016
cpvs
33100000

Flow meters and imuinjektorit for use in hospitals since 11.01.2016 open-ended agreement for three (3) months' notice.

Flow meters and imuinjektorit

IS-Hankinta Oy | Published September 26, 2016  -  Deadline October 6, 2016
cpvs

Flow meters and imuinjektorit for use in hospitals since 11.01.2016 open-ended agreement for three (3) months' notice.

Checking and testing apparatus

VTT Technical Research Centre of Finland Ltd | Published February 14, 2017
cpvs
38500000

Currently, VTT operates a stationary test facility for vehicle exhaust emissions, consisting of a CVS systems and gas analyzers as well as chassis dynamometers for both light duty and heavy duty vehicles. The PEMS acquisition now under consideration is to enhance our research portfolio and also to enable portable exhaust emission measurements of such vehicles to meet EU Real Driving Emissions (RDE) legislation.

The system must meet all the appropriate conditions and requirements stated in European EU 6d No. 692/2008 Annex 1 regulation and European Euro IV In-Service Conformity rules (EU No. 582/2011).

The PEMS system architecture shall be modular and consist of the following measurement modules:

— System control module (integration of devices and sensors, data logging, calibration, external inputs such as GPS, OBD2, J1939 etc.),

— Module for measuring real time NO/NO2 concentrations of the exhaust gas (CLD),

— Module for measuring real time CO/CO2 concentrations of the exhaust gas (NDIR),

— Module for measuring real time total hydrocarbons THC and the methane CH4 concentrations of the exhaust gas (FID), a heated sample line must be included,

— Module for measuring the real time particle number concentration (PN) of the exhaust gas,

— Modules for measuring the particle mass with gravimetric filter sampling and micro soot sensor (GFM and MSS),

— Real time exhaust flow meter (EFM) with separate measuring tubes for low and high flow,

— Calibration module,

— Power supply module with batteries and a charger (230V).

Application for participation: Pressure Refuelling of automobiles Alterations

Puolustusvoimat: Puolustusvoimien logistiikkalaitos | Published July 11, 2016  -  Deadline August 16, 2016
cpvs
50100000

Fighter Aircraft pressure refueling car modifications: - scope of the contract: number of modifications, - the actual supply: in 2017, 10 pieces, - additional acquisition of reservation: In 2018, 15 pieces - in addition to its own price in both years during renovations flow meter exchange (2017: 10 songs and 2018: 15 units), - type of contract: the contract. Pressure Tankers are in use operative equipment, which can not be exported outside the borders of Finland, due to operational reasons.

Repair and maintenance services of motor vehicles and associated equipment

Puolustusvoimat: Puolustusvoimien Logistiikkalaitos: Osallistumishakemus (Painetankkausautojen muutostyöt) | Published January 7, 2016  -  Deadline February 19, 2016
cpvs
50110000, 50100000

- Fighter Aircraft pressure refueling of cars alterations - Extent of agreement: the number of pieces alteration, - the actual acquisition: in 2016, 10 pieces - additional acquisition reserve: in 2017, 15 pieces - in addition to its own price in both years alterations YH-in connection with a flow meter for the exchange (2016: 10 pieces and 2017: 15 copies), - the type of contract: the contract. Pressure Tankers are in use in operational Kalus-knowledge which can not be exported outside the borders of Finland, due to operational reasons.

Participation Application: Pressure Refuelling of automobiles Alterations

Puolustusvoimat: PUOLUSTUSVOIMIEN LOGISTIIKKALAITOS: Osallistumishakemus (Painetankkausautojen muutostyöt) | Published January 5, 2016  -  Deadline February 19, 2016
cpvs
50110000, 50100000

• Fighter Aircraft pressure refueling of cars Alterations • The scope of the contract: modification of units No actual acquisition: in 2016, 10 pieces No additional purchase reservation: in 2017, 15 pieces o In addition to its own price in both years alterations YH-in connection with a flow meter for the exchange (2016: 10 pieces and 2017: 15 shares) • Agreement Type: Pressure contract Tankers are in use in operational Kalus-knowledge which can not be exported due to outside Finland for operational reasons.

Animal respirometry system

University of Jyväskylä | Published April 24, 2012  -  Deadline May 25, 2012
cpvs
38000000

Respirometry system for measuring rat and mouse O2 consumptiom and CO2 production The system must consist of : - O2 analyzer. -CO2 analyzer -mass flow meter and controller -desiccant system for air samples -necessary pumps for the system -software for controlling, data acquisition and analysis, and export; software must be compatible with Microsoft 7: - system should be equipped to measure basal metabolism (at least 24 h measurement period) of min. four animals at the same time, - it should be possible to use the system to measure VO2 max of one animal at a time. -four chambers (mouse and rat) for measuring basal metabolism Tenders may consist of the whole system or any part(s) of the system. All parts of the system should be priced separately. See details in the Invitation to Tender at https://www.jyu.fi/sport/tiedekunta/hankinnat Ennakoitu arvo tai hintahaarukka: 30000 - 61000 EUR

Repair and maintenance services of motor vehicles and associated equipment

Puolustusvoimat: Puolustusvoimien logistiikkalaitos | Published July 13, 2016  -  Deadline August 16, 2016
cpvs
50110000, 50100000

Fighter Aircraft pressure refueling car modifications:

- Scope of the contract: number of modifications,

- The actual supply: in 2017, 10 pieces,

- Acquisition of additional charge: In 2018, 15 pieces,

- In addition to its own price in both years during renovations flow meter exchange (2017: 10 and 2018 pieces: 15 pieces)

- Type of contract: the contract.

Pressure Tankers are in use operative equipment, which can not be exported outside the borders of Finland, due to operational reasons.

Portable Emission Measurement System PEMS

VTT TECHNICAL RESEARCH CENTRE OF FINLAND LTD | Published February 12, 2017
cpvs
38500000

Currently, VTT operates a stationary test facility for vehicle exhaust emissions, consisting of a CVS systems and gas analyzers as well as chassis dynamometers for both light duty and heavy duty vehicles. The PEMS acquisition now under consideration is to enhance our research portfolio and also to enable portable exhaust emission measurements of such vehicles to meet EU Real Driving Emissions (RDE) legislation. The system must meet all the appropriate conditions and requirements stated in European EU 6d No. 692/2008 Annex 1 regulation and European Euro IV In-Service Conformity rules (EU No. 582/2011. The PEMS system architecture shall be modular and consist of the following measurement modules: • System control module (integration of devices and sensors, data logging, calibration, external inputs such as GPS, OBD2, J1939 etc.) • Module for measuring real time NO/NO2 concentrations of the exhaust gas (CLD) • Module for measuring real time CO/CO2 concentrations of the exhaust gas (NDIR) • Module for measuring real time total hydrocarbons THC and the methane CH4 concentrations of the exhaust gas (FID), a heated sample line must be included • Module for measuring the real time particle number concentration (PN) of the exhaust gas • Modules for measuring the particle mass with gravimetric filter sampling and micro soot sensor (GFM and MSS) • Real time exhaust flow meter (EFM) with separate measuring tubes for low and high flow • Calibration module • Power supply module with batteries and a charger (230V) Currently, VTT operates a stationary test facility for vehicle exhaust emissions, consisting of a CVS systems and gas analyzers as well as chassis dynamometers for both light duty and heavy duty vehicles. The PEMS acquisition now under consideration is to enhance our research portfolio and also to enable portable exhaust emission measurements of such vehicles to meet EU Real Driving Emissions (RDE) legislation. The system must meet all the appropriate conditions and requirements stated in European EU 6d No. 692/2008 Annex 1 regulation and European Euro IV In-Service Conformity rules (EU No. 582/2011.

The top reservoir Kemi City Hall renovation

Kemin Vesi Oy | Published July 12, 2016  -  Deadline September 8, 2016
cpvs
45262330, 45262400, 45331000, 45311200, 45432111, 31682210, 45260000

The work will be corrected in Kemi City Hall on floors 10 to 12. in the water tank 3 (3 x 688 m3) of concrete, interior surfaces and building water tanks stainless steel Tubular framed PVC fabric margins. Water tanks maintenance ladder refitted, tanks and water pipes feeding process valves and the process pipe insulation will be renewed and the process pipe flow meter is installed. In addition, the coating of the tank space floor and the condensate collecting grooves, made the service doors on the tank space beneath the crawl space and the town house on the water to the ceiling, built container space maintenance ladder, repaired tanks beneath the sweat on the bottom floor cracks with epoxy grouting, renewed in tank mode service platforms. The tank will be built without drying mode. The contract also includes the process valve actuators, reservoir space for dehumidification, heating and lighting SIA jobs. work on the outside of the tank farm of exchange flanged bolts located in the City Hall tube tunnel process pipes and the City Hall courtyard built in the drain water discharge wells.

Oxygen Flowmeter, imuejektorit and their use with accessories

HUS-Logistiikka liikelaitos | Published April 28, 2014  -  Deadline May 20, 2014
cpvs
33100000

HUS tenders for oxygen and air flow meters, as well as imuejektorit Meilahden tower for the hospital. The hospital will take place after the turn of the year 2014-2015. As a tendering company that won the contract entered into with the purchase of these products also in the years to HUS and South Karelia District of Social and Health District (Eksote) for future products. Detailed conditions are specified in the invitation to tender in the attached draft contract. NOTE! Ad information can be found Tarjouspalvelu.fi supplier portal. Also, the offer / request to participate transmission is made through this program. Direct link to the notice further information can be found here Hilma notification. https://tarjouspalvelu.fi/huslogistiikka/?id=18338&tpk=80df50e3-7bbc-4aa9-896a-3399eff2d823

Oxygen Flowmeter, imuejektorit and their use with accessorie

HUS-Logistiikka liikelaitos | Published May 2, 2014  -  Deadline May 20, 2014
cpvs
33100000

HUS tenders for oxygen and air flow meters, as well as imuejektorit Meilahden tower for the hospital. The hospital will take place after the turn of the year 2014-2015. As a tendering company that won the contract entered into with the purchase of these products also in the years to HUS and South Karelia District of Social and Health district (Eksote) for future products. Detailed conditions are specified in the invitation to tender in the attached draft contract. Note! Ad information can be found Tarjouspalvelu.fi supplier portal. Also, the offer / request to participate transmission is made through this program. Direct link to the notification of additional information can be found here Hilma notification: https://tarjouspalvelu.fi/huslogistiikka/?id=18338&tpk=80df50e3-7bbc-4aa9-896a-3399eff2d823

CORRECTION NOTICE: Portable ultrasound device pulmonary diseases ward and the ultrasound device gynecological clinic

Lapin sairaanhoitopiirin kuntayhtymä | Published March 9, 2016  -  Deadline March 31, 2016
cpvs
33112300

We ask for a quotation Lapland Central Hospital department of pulmonary diseases acquired the manner movable ultrasonic device and / or the gynecological department purchased mode ultrasound device. System requirements are presented in the invitation to tender under the "object of the acquisition criteria". Purchasing will take place during the year 2016. Correction notice in the following adjustments were made to the invitation to tender: purchase of Pulmonary Diseases Department of mobile ultrasound device technical definitions refined to respond to the need to use the following: - for compelling hardware requirements were removed flowmeter (duplex / triplex), DICOM service classes, at least 3 sensor ports, as well as the exchange of the sensor via a single key - usability removed from the practical measurement functions - connectivity clarified LSHP's photo-archive of the DICOM image archive.

NOTE! Notification information can be found Tarjouspalvelu.fi -toimittajaportaalista. Also on offer / request to participate, the transmission is done in this way. Direct link to the notification of additional information can be found here Hilma-notification.

Vascular prostheses (012)

Varsinais-Suomen sairaanhoitopiirin ky | Published September 10, 2017  -  Deadline October 19, 2017
cpvs
33000000

Purchase of vascular prostheses during a 3 year acquisition period + with a possible 1 year option period. Acquisition is a joint procurement of special responsibility. The special responsibility areas involved are listed in the tender dossier. A-titles are divided into the following product families: A01 Stenttigrafts A02 Vascular A03 Vascular prostheses There are individual titles within the product families. The comparison of the products offered is made as individual items. The B-titles are divided into the following product families: B01 Embolectomy catheters B02 Vascular disorders B03 Vascular aortic valve aorta thorax B04 Vascular prosthesis pes B05 Other items The product families B01 and B03 are series. The series must provide all the requested products. There are individual titles within other product families. Device specific items are divided into the following product families: L01 Medistim flowmeter sensors Acquisition of vascular prostheses during a 3 year acquisition period + with a possible 1 year option period. Acquisition is a joint procurement of special responsibility. The special responsibility areas involved are listed in the tender dossier. Variants will be accepted (alternative tenders): no Different alternatives are accepted (alternative tenders): no Different alternatives are accepted (alternative offers): no
  • 1