Public tenders for flow-meter in Bulgaria

Find all Energy tenders in the world.
Finding business opportunities has never been easier.

Results for energy. Make a new search!

Delivery of termomasovi flowmeters boilers 1 to 8 to improve the regulation of the combustion process

ТЕЦ Марица изток 2 ЕАД | Published February 28, 2017  -  Deadline March 23, 2017
cpvs
31682210

Delivery of termomasovi flowmeters boilers from 1 to 8 in order to improve the regulation of the combustion process specification documentation (Annex №1). Mass flow meter with a measuring range (0-160000) Nm- 4 pcs., Mass flowmeter with a measurement range (0-70000) Nm - 4 pcs ..

Delivery of heating fuel - compressed natural methane gas for the needs of SBPFZDPLR "King Ferdinand I" s.Iskrets Ltd. for a period of 12 months. Description of the quantities and volumes of supply are contained in a special specification.

Специализирана болница по пневмофтизиатрични заболявания за долекуване, продължително лечение и рехабилитация /СБПФЗДПЛР/ "Цар Фердинанд I" - с. Искрец | Published December 15, 2016  -  Deadline December 19, 2016
cpvs
09100000

1. Quantity and volume of deliveries contained in that in a special specification. 2. The delivery takes place ex warehouse to the developer. 3. The contracting authority stating the type and quantity of fuel depending on your needs. 4. Fuel consumption is reported in the statements of a flowmeter installed at the entrance of the gas installation. 4. Payment shall be made by reading a meter with a payment order to the bank account of the sponsor postponed. 5. Upon receipt of fuel contracting review the status of the goods and make a claim if necessary. Upon detection of faults, defects and disorders in the standards, the supplier must replace the corresponding amounts immediately. 6. The fuel is supplied together with the corresponding quality and other certificates should be in commercial form and quality to meet the State Standards and the requirements of the technical requirements for products. 7. The fuel must be delivered in the corresponding required by that law and regulations packaging and containers. 8. The fuel contains manufacturer information and document standard on quality. 9. The fuel is delivered within 48 / forty-eight / hours from the application. 10. The applicant must also have presented evidence for the possibility of execution of the order, notably: • Evidence of right and opportunity to trade fuel wholesale. • Evidence that the proposed fuels are authorized. • Proof of ownership of a vehicle capable of transporting compressed natural gas methane. • To have personnel to perform the contract.

Diesel fuel

Държавна агенция „Държавен резерв и военновременни запаси“ | Published April 4, 2017
Winner
„Лукойл България“ ЕООД
cpvs
09134200

Supply of fuel for diesel engines winter class "E" mineral without bio-components, according to Art. 50, para. 1 of the Law on renewable energy to 29,729 tons ± 0,5% and the amount of the insured funds YES "DRVVZ." The exact amount of fuel that will be contracted for delivery during the period of validity of the order-specification is determined based on the lowest price achieved per tonne under p. 13 of the same and according to the funds available to the developer. The fuel should meet those indicators in Annex № 2 to art. 6 pt. 2 of the Ordinance on quality requirements for liquid fuels, terms and manner of their control. Delivery takes place on a schedule specified by the Buyer. Delivery is made by rail and / or on product. The fuel quantity is determined by weighing on the scales or mass flow meter, referred to by the Purchaser.

Exchange deal for delivery of 074.900 tons 5 ± 0,5% fuel for diesel engines winter class "E" mineral without bio-components, according to Art. 50, para. 1 of the Law on Renewable Energy. The contract term is 13 (thirteen) months, delivery time is twelve (12) months from the issuance of the warrant, according to the order-specification.

Supply of portable ultrasonic flowmeter and accessories to measure the flow of liquids

"АЕЦ Козлодуй" ЕАД | Published March 30, 2017  -  Deadline April 6, 2017
cpvs
42967000

The opening of bids will take place on 07.04.2017g. at 10:00 in Management "Commercial", "NPP Kozloduy"

Supply of portable ultrasonic flowmeter and accessories to measure the flow of liquids

"АЕЦ Козлодуй" ЕАД | Published April 7, 2017  -  Deadline April 11, 2017
cpvs
42967000

Pursuant to Art. 188, para. 2 ppl in this regard that the initial deadline received at least three offers. The opening of bids will take place on 12.04.2017g. at 13:30 in Management "Commercial", "NPP Kozloduy".

The subject of the contract is delivery through the purchase of new diaphragm meters of natural gas for the needs of Sevlievogaz 2000 AD. The contract includes delivery of new dvushtutserni meters of natural gas - G2.5 and single copies - G4 and single pieces ednoshtutserni meters of natural gas G6, G10, G16, G25. Flow meters must be built with mechanical correction by temperature and tb20C / tsp20C, produced or passed technical inspection in 2016/2017.

"Севлиевогаз - 2000" АД - Севлиево | Published January 25, 2017  -  Deadline February 6, 2017
cpvs
38420000

Bids will be opened on 07.02.2017g. from 9:30 in the conference room in the building of "Sevlievogaz-2000" JSC. The opening of tenders and the announcement of the bids will be made public commission meeting. At the public meeting can be attended by representatives of the participants. All persons present shall be recorded in a list containing the names of persons and whom they represent. Delegate who will represent the public hearing by an authorized person shall submit to the same expressly for this contract attorney.

The subject of the contract is delivery through the purchase of new diaphragm meters of natural gas for the needs of Sevlievogaz 2000 AD. The contract includes delivery of new dvushtutserni meters of natural gas - G2.5 and single copies - G4 and single pieces ednoshtutserni meters of natural gas G6, G10, G16, G25. Flow meters must be built with mechanical correction by temperature and tb20C / tsp20C, produced or passed technical inspection in 2016/2017.

"Севлиевогаз - 2000" АД - Севлиево | Published February 7, 2017  -  Deadline February 10, 2017
cpvs
38420000

On the grounds of Article 188, Paragraph 2 of the Law on public procurement in relation to the posted ads with outgoing 02.009 from 25.01.2017g., Published under № 9060891 PPA has extended the initial deadline for submission of tenders, as initial deadline were submitted two offers. Bids will be opened on 13.02.2017g. from 9:30 in the conference room in the building of "Sevlievogaz-2000" JSC. Additional information and documents related to the contract can be obtained on the buyer profile. Delegate who will represent the public hearing by an authorized person shall submit to the same expressly for this contract attorney.

SUPPLY OF FOOD PRODUCTS FOR THE NEEDS OF SBPFZDPLR "King Ferdinand I" Iskrets Ltd. C. for a period of 12 months. The types of food products, their quantities and volumes contained in a special specification.

Специализирана болница по пневмофтизиатрични заболявания за долекуване, продължително лечение и рехабилитация /СБПФЗДПЛР/ "Цар Фердинанд I" - с. Искрец | Published December 6, 2016  -  Deadline December 14, 2016
cpvs
09100000

1. Quantity and volume of deliveries contained in that in a special specification. 2. The delivery takes place ex warehouse to the developer. 3. The contracting authority stating the type and quantity of fuel depending on your needs. 4. Fuel consumption is reported in the statements of a flowmeter installed at the entrance of the gas installation. 4. Payment shall be made by reading a meter with a payment order to the bank account of the sponsor postponed. 5. Upon receipt of fuel contracting review the status of the goods and make a claim if necessary. Upon detection of faults, defects and disorders in the standards, the supplier must replace the corresponding amounts immediately. 6. The fuel is supplied together with the corresponding quality and other certificates should be in commercial form and quality to meet the State Standards and the requirements of the technical requirements for products. 7. The fuel must be delivered in the corresponding required by that law and regulations packaging and containers. 8. The fuel contains manufacturer information and document standard on quality. 9. The fuel is delivered within 48 / forty-eight / hours from the application. 10. The applicant must also have presented evidence for the possibility of execution of the order, notably: • Evidence of right and opportunity to trade fuel wholesale. • Evidence that the proposed fuels are authorized. • Proof of ownership of a vehicle capable of transporting compressed natural gas methane. • To have personnel to perform the contract.

Water meters

„Софийска вода“ АД | Published October 25, 2016
cpvs
38421100

Supply and installation of ultrasonic flow meter for sludge water with 2 external sensors working submerged in sludge water

Medical equipments

Столична община | Published March 24, 2016  -  Deadline May 5, 2016
cpvs
33100000

Supply and installation of medical equipment for neonatology unit for the needs of "Down specialized maternity hospital for active treatment" St. Sofia "" EAD:

1. Workstation service newborns with dimensions 229/70/200 cm - 3;

2. Manipulation station with dimensions 189/46/89 cm - 1;

3. Nursing working post with dimensions 375/106/82 cm - 1;

4. Manipulation station service newborns with dimensions 244/67/89 cm - 1;

5. Manipulation station with dimensions 138/67/89 cm - 1;

6. Combo Drive with electronically controlled air purification and disinfection of surfaces through the action of UVC rays - 5;

7. Metallic shelves of medical supplies - 5;

8. Sakodarzhatel with lid and pedal two-section for socks - 2;

9. Metal bench Sofa - 1;

10. Dispenser with three compartments for gloves, masks and hats with dimensions 60/16/24 cm - 1;

11. Stand infusion pumps Overcoat installation with 2 tables with adjustable height - 10;

12. Bus system from two lines to conduct intensive care with a total length of 12 m - 1;

13. flowmeter with humidifier and system installation Overcoat - 10;

14. Vacuum regulator with a back court system and installation Overcoat - 10;

15. flowmeter with humidifier for direct mounting - 2;

16. Vacuum regulator with a back court for direct mounting - 2 pieces.

Note: Tolerance of the above dimensions for positions 1-5 and 10-16 ± 5%.

Machines and apparatus for testing and measuring

Държавна агенция за метрологичен и технически надзор | Published July 18, 2015
Winner
Булсиб Контрол ООД, ЕИК 175387897
cpvs
38540000

Delivery of "Portable reference flowmeter liquefied butane gas", namely: - standard portable flow meters for liquid gas propane-butane - 8.

Machines and apparatus for testing and measuring

Държавна агенция за метрологичен и технически надзор | Published March 7, 2015  -  Deadline April 14, 2015
cpvs
38540000

"Supply of test and measuring equipment" in seven lots: - Lot № 1 with subject: "Pump Units for hydrostatic testing of pressure equipment"; - Lot № 2 with subject: "Portable laser devices for leak detection of natural gas"; - Lot № 3 with the subject "Equipment for the needs of market surveillance"; - Lot № 4 with subject: "Portable reference flowmeter liquefied butane gas"; - Lot № 5 with subject: "Devices for the needs of the quality control of liquid fuels"; - Lot № 6 with subject: "Stand for the determination of cetane number"; - Lot № 7 with subject: "Equipment for the needs of quality control of liquid fuels".

"Supply of laboratory equipment for the Mining and Geology" St.. Ivan Rilski ".

Минно-геоложки университет „Св. Иван Рилски“ | Published October 18, 2014
Winner
„В и К — Комплект“ ООД, ЕИК 130946783Район „Оборище“, ул. „Дунав“ № 41, ет. 1София 1202 wik_valt@mail.bg +359 29804086 +359 29835053
cpvs
38000000, 38421000

The object of this contract is the supply of laboratory equipment (appliances) for the needs of Mining and Geology "St.. Ivan Rilski ", installation, site acceptance tests of the equipment / equipment supplied / and put them into service in Lot № 4 - Delivery of ultrasonic flowmeter.

"Supply of laboratory equipment for the Mining and Geology" St.. Ivan Rilski ".

Минно-геоложки университет „Св. Иван Рилски“ | Published August 21, 2014
Winner
„Ню-Тек“ ЕООД, ЕИК 040241849Район „Люлин“, ж.к. „Люлин“, бл. 517, вх. E, ап. 167София 1359 bjanntek@tu-sofia.bg +359 29625286 +359 28687110
cpvs
38000000, 38550000

The object of this contract is the supply of laboratory equipment (appliances) for the needs of Mining and Geology "St.. Ivan Rilski ", installation, site acceptance tests of equipment (equipment supplied) and their commissioning, and training of at least two employees of the Employer in each lot for the operation and maintenance of equipment (equipment supplied) divided into four (4) self-lots, as follows: - Lot № 1 - Supply of camera for industrial maintenance; - Lot № 2 - Supply of Kalbov photometer; - Lot № 3 - Supply of standard intensity; - Lot № 4 - Delivery of ultrasonic flowmeter.

Purchasing and commissioning (delivery, installation and initial testing) specialized fixed assets necessary for commercialization of innovative products in two lot

„Бейс енерджи“ ЕООД | Published May 2, 2014  -  Deadline May 19, 2014
cpvs
30214000, 38432100

Purchasing and commissioning (delivery, installation and initial testing) specialized fixed assets necessary for commercialization of innovative products in two lots: Lot 1 1.1. Semi-automatic band sawing machine - 1, 1.2. Disc Cutting Machine - 1, 1.3. Compressor - 1 1.4. Tabletop Drill - 2, 1.5. Belt sander - 1, 1.6. Emery - 1, 1.7. TIG machine argon-arc welding water cooled - 1, 1.8. TIG machine argon-arc welding - 2, 1.9. Column drilling machine - 1, 1.10. MIG MAG welding machine - 2, 1.11. Sand camera - 1, 1.12. Treatment facilities for welding - 2, 1.13. Static column cantilever crane - 2, 1.14. Profile bending machine - 1, 1.15. Plasma - 1. Lot 2: 2.1. Testing and measuring instruments, 2.1.1. Gas analyzer system - 1, 2.1.2. Flowmeter for measuring gas - 1, 2.2. Workstations - 2.

"Supply of laboratory equipment for the Mining and Geology" St. Ivan Rilski ".

Минно-геоложки университет „Св. Иван Рилски“ | Published May 15, 2014  -  Deadline June 20, 2014
cpvs
38000000, 38421000

Subject of this contract is the supply of laboratory equipment / appliances / needs of Mining and Geology "St. Ivan Rilski ", installation, site acceptance testing of equipment / equipment supplied / and their commissioning, and training of at least two employees of the Employer in each lot for the operation and maintenance of equipment / equipment supplied / divided by four (4) self-lots, as follows: - Lot № 1 - Supply of camera for industrial maintenance; - Lot № 2 - Supply of Kalbov photometer; - Lot № 3 - Supply of standard intensity; - Lot № 4 - Delivery of ultrasonic flowmeter.

"Selecting a contractor for engineering (design, construction works, supply of machinery and equipment, staff training and supervision) of WWTP within the investment project" Expansion and rehabilitation of water supply system and reconstruction of WWTP - Pernik " .

Община Перник | Published July 30, 2013  -  Deadline September 23, 2013
cpvs
42912330, 45252100, 45252127, 45252130, 45252200, 45259200, 71220000, 71320000, 71322000

"Selecting a contractor for engineering (design, construction works, supply of machinery and equipment, staff training and supervision) of WWTP within the investment project" Expansion and rehabilitation of water supply system and reconstruction of WWTP - Pernik " Reconstruction of WWTP WWTP site is located southwest of the town of Pernik (about 5 km) in the territory of the town Batanovtsi. The plot has an area of ​​115 acres and a natural land elevation of 650 to 654 m distance of the plant to the nearest residential area of ​​the town Batanovtsi is over 500 m distance to the Struma River is 50 m site is located in the required distance from the city, according to Standards for design of sewer systems in 1990 Appendix № 8 of Article 126 for minimum sanitary protection zones for wastewater treatment - Table. 8.1. Of land designated for the WWTP are made geodetic surveys of the site, made necessary for hydrologic and hydraulic calculations. The selected contractor must carry out detailed design. The reconstruction of WWTP provides for the following: A. By way of water: Spillway at the entrance - a new rough chakalozadarzhatel - new. Reservoir (host cell) for septic water - new. Building grids - (repair and retrofit) - Coarse grids - Fine screens. There is renovation of the building - roof, walls, ventilation. Aerated pyasakomaslozadarzhatel - (repair). Flowmeter input - (new). Switchgear to MAH - (new). Primary radial settling tanks 2 pcs. - (Repair and retrofit). LV Primary sludge. (Repair and retrofit). Selector to the aeration tanks and LV IPR - (reconstruction and upgrading of 1 pc. MAH). Reagent holding dephosphatization - (new). Aeration tanks (reconstruction of 4 pcs. Available). Blower building (existing - retrofitting). Switchgear to the VRU. (New). Secondary radial precipitators (3 pcs. Newer). Flowmeter output - (new). UV disinfection - (new). B. Sludge treatment: LV IPR and EAS (new). Shaft floating on VRU - (new). Sludge for EAS - (new). Distribution and collection chamber to the aerobic stabilizers (new). Aerobic stabilizers (retrofitting of same. 3pc. VRU). Sludge for stabilized sludge (new). Silo for sludge. Sludge dewatering screw presses. Slug. Repair and improvement of LV internal waters of the WWTP. Technological lines on site. - Platform roads and landscaping. - Security fence. Protection from flooding the site. - After delivery and installation of necessary machinery and equipment contractor will carry out personnel training. - In the framework of the contract provided for the implementation of supervision. Important! The participant shall perform design work in conditions: existing conceptual design is indicative, to comply with the approved scheme and technological parameters of the input and output of the WWTP, as in the preparation of project work phase will be detailed in the specific parameters of the production buildings, facilities and individual elements technological equipment. The subject of the contract includes the supply of materials needed for the project.

"Delivery of Fuel for Diesel Engines, Winter, Class" E ", Mineral without Biocomponents"

 | Published September 22, 2017  -  Deadline September 19, 2017
cpvs

Delivery of fuel for diesel engines, winter, class "E", mineral without bio-components, according to art. 50 para. 1 of the Renewable Energy Act. The amount is up to 18 211,082 tons ± 0,5% and up to the amount of the funds provided. Diesel fuel should meet the indicators set out in Annex 2 to Art. 6, item 2 of the Ordinance on the quality requirements for liquid fuels, the conditions, the order and the way of their control. The delivery is carried out according to a schedule specified by the contracting authority. Delivery is by rail and / or by pipeline. The amount of fuel is determined by a mass flow meter specified by the Contracting Authority. Each batch or total quantity in a single tank is accepted after a Qualification by a Goods Control Company designated by the Contracting Authority, with the cost of the Qualification being at the expense of the Contractor. The delivery period is up to 12 (twelve) months from the issue of the warehouse, according to the order-specification. The manner and terms of payment are detailed in the order specification. Pursuant to Art. 79, para. 4 of the PPA, the contract shall be concluded according to the rules of the relevant exchange. According to the order specification, at least one contract must be concluded.

"Supply of automotive gasoline, brand A 95H, winter, class" C ", mineral without bio-components"

 | Published May 12, 2017  -  Deadline May 12, 2017
cpvs

Supply of automotive gasoline, winter, class "C", mineral without bio-components, according to art. 50, para. 1 of the Renewable Energy Act, up to 47 447 tons ± 0,5% and up to the amount of the financial resources provided by the State Agency for Regional Development. The exact quantity of fuel for which a delivery contract will be concluded within the term of validity of the contract-specification shall be determined on the basis of the lowest price achieved per tonne under item 13 of the contract at the date of conclusion of the contract and according to the available financial Funds of the contracting entity. Gasoline should meet the above-mentioned indicators in Appendix 1 to Art. 6, item 1 of the Ordinance on the quality requirements for liquid fuels, the conditions, the order and the way of their control. Delivery is made on a schedule specified by the Buyer. Delivery is by rail and / or by pipeline. The fuel quantity is determined by the weighing method or the mass flowmeter specified by the Purchaser. Each batch or total quantity in a tank shall be accepted after a qualifying by a stock control firm as determined by the contracting entity, the cost of grading being at the expense of the contractor. The delivery period is up to 12 (twelve) months from the issue of a warehouse, according to the order-specification. The manner and terms of payment are detailed in the order specification. Pursuant to Art. 79, para. 4 of the Public Procurement Act, the contract shall be concluded according to the rules of the relevant exchange. According to the order-specification, at least one contract must be concluded.

Supply of portable ultrasonic flow meter and liquid flow measuring accessories

"АЕЦ Козлодуй" ЕАД | Published June 29, 2017  -  Deadline July 6, 2017
cpvs
42967000

The opening of the offers will take place on 10.07.2017. At 09:30 in the Commercial Department, "Kozloduy NPP" EAD