Call +44 800 9755 164

Public tenders for flow-meter

Find all Energy tenders in the world.
Finding business opportunities has never been easier.

Results for energy. Make a new search!
Energyflow meter

FLIGHT TURBINE FLOW METER DEVELOPMENT

National Aeronautics and Space Administration, Kennedy Space Center | Published November 3, 2016  -  Deadline December 6, 2016
THE PRE-SOLICITATION NOTICE (SYNOPSIS) FOR THIS PROCUREMENT WAS PREVIOSELY PUBLISHED UNDER: "NNK16MB23Q FLIGHT TURBINE FLOWMETER"
THE SYNOPSIS WAS POSTED ON 09/15/2016 AND ARCHIVED ON 10/18/2016.NOTE:The solicitation is available only through the Federal Business Opportunities website, (FedBizOpps) (http://www.fbo.gov). No hard copies, CD's or other media will be provided by the Government. It is the responsibility of the potential offerors to download the documents as instructed below. Drawings and specifications are only available as discussed in the Export Control Procedures.
The Statement of Work (SOW), Technical Specifications (SPEC) and Milestone Payment Summary for this procurement include International Traffic in Arms Regulations (ITAR) restricted information. These documents will not be posted on the Federal Business Opportunities (FedBizOpps) website. These documents will only be available via the encrypted file share program AMRDEC Safe Access File Exchange (SAFE). Contractors will not be permitted to download documents until cleared through Defense Logistics Information Service (DLIS). Clearance may take a few weeks, so Contractors are encouraged to register immediately.All Contractors that will be interested in receiving drawings and specifications for this project will have to ensure they have been pre-screened by the Defense Logistics Agency (DLA) Joint Certification Program (JCP) at: http://www.dlis.dla.mil/jcp/To obtain the technical documents a potential Offeror must be pre-screened and:1. Review the attached Export Control Letter2. Complete Export Control Request for Access (EC 001)3. Complete Export Control Certification (EC 002)4. Complete Export Control Non-Disclosure Agreement (EC 003)After completion of documents, email to michael.s.ahearn@nasa.gov The original Classification Code for this requirement was 66 - Instruments & Laboratory Equipment (supply). Since progress payments based upon performance are being made, the Classification Code has been changed to K - Modification of Equipment (service).
 
 

FLOW METER

Department of the Navy, Naval Sea Systems Command | Published November 25, 2016  -  Deadline December 5, 2016
Naval Undersea Warfare Center Division Keyport is soliciting for 2 each Electro Magnetic Current Meters. This requirement is being issued as a combined synopsis/solicitation for commercial Items in accordance with FAR 12.6, as supplemented with additional information included in the attached solicitation. This announcement constitutes the only solicitation. The Defense Priorities and Allocations System (DPAS) applicable assigned rating for this requirement is DO-C9. The solicitation issued as a request for quotation (RFQ) is N00253-17-T-0056 and is attached to this announcement. Provisions and clauses in effect through the latest Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) are included in the attached solicitation. The proposed contract is 100% set aside for small business concerns. Applicable NAICS code for this requirement is 334515 and has a size standard of 750 employees or less. The government prefers FOB Destination pricing to NUWC Detachment San Diego, NAS North Island 92136-5299. Requirements and evaluation procedures are listed in the attached solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding this solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions should be submitted via e-mail to: Diana.lasota@navy.mil or faxed to (360) 396-7036. No paper copies will be mailed. Failure to respond to this RFQ and associated amendments if applicable prior to the closing date and time established may render an offer non-responsive and result in rejection. To access the clauses/provisions to be completed, download FAR at http://acquisition.gov/far/. Download the DFARS at: http://www.acq.osd.mil/dp/dars/dfars.html. Offerors are also advised that these representations and certifications can be completed electronically via the SAM website at https://www.sam.gov.

FLOW METER AQUEDUCT

Comune di Gianico | Published December 5, 2016  -  Deadline August 29, 2019
FLOW METER AQUEDUCT

Laboratory gas flow meter delivery LUA Technical Faculty of the needs of public research programs latvenergo (VP38) within

Latvijas Lauksaimniecības universitāte, 90000041898 | Published November 24, 2016  -  Deadline December 5, 2016
Laboratory gas flow meter delivery LUA Technical Faculty of the needs of public research programs latvenergo (VP38) within

Registration prices for the purchase of medical oxygen packed in steel drum through lending, with pressure regulator with flow meter and pressure gauge.

MINISTÉRIO DA DEFESA | Published November 24, 2016  -  Deadline December 19, 2016
Object: Electronic Auction - prices registration for the purchase of medical oxygen packed in steel drum through lending, with pressure regulator with flow meter and pressure gauge.

Acoustic Doppler Current Meter

Fisheries and Oceans Canada | Published December 7, 2016
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Acoustic Doppler Current Meter  F5956-160334/A Nowakowski, Leanne Telephone No. - (902) 403-7112 (    ) Fax No. - (902) 496-5016 (    )  Fisheries and Oceans Canada has a requirement for one Acoustic Doppler Current Meter. Delivery by March 31, 2017.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Rainwater sensors and flow meters Outsourcing

Tallinna Tehnikaülikool - Egon Müür | Published November 11, 2016
Rainwater sensors and flow meters Outsourcing

Acquisition of flow meters electromagnetic PREM-20

федеральное государственное казенное учреждение "Войсковая часть 2439" | Published November 15, 2016  -  Deadline November 20, 2023
Acquisition of flow meters electromagnetic PREM-20 26.51.63.120 PCs 2,00 800,00 600,00 29 59 total: 59 600,00

Acq16-72 Tender_127 Rfq_236 verification service of the drainage system with flow meters.

ACQUE VICENTINE S.P.A. - Acquisti | Published November 11, 2016  -  Deadline November 11, 2017

REQUIREMENT OF NEW VENDORS FOR STEEL FABRICATION WITH VENDORS MATERIAL

Bharat Heavy Electricals Limited | Published August 24, 2016  -  Deadline August 23, 2017
Outsourcing BHEL Tiruchirappalli invites new vendors for fabrication of steel items boiler components structural items such as Boiler Columns Auto Welded Beams and Bracings Boiler Ducts General Fabrication of Structures Galvanized Painted Handrails Stairs Round Corners Metallic Expansion Bellows Punching Pressing and Shearing Jobs Retainers Tapping Points Shaped Plates /Filler Plates Venturi meter Flow meter Buckstays Pleated Panels Ceiling girder Doors Drain oil tank and SS fabrication and Blasting and Painting of Fabricated Boiler components

Design & Build pumping station and Rising main Greenfields housing estate, Convoy

Donegal County Council | Published November 9, 2016  -  Deadline December 5, 2016
Design and Construction of the mechanical, electrical and civil works required providing the complete new pumping facilities, including, duty and standby sewage pumps, wet well, rising mains and rising main discharge manhole and Public sewer connection. Works will include decommissioning, removal and disposal of the old plant and making good.An electromagnetic type flow meter, including an upstream sluice valve, shall be installed on the rising main from the Pumping Station.
The works include a Telemetry system is to be provided and installed and configured by the Contractor.
The works include the design and construction of a securely fenced enclosure with lockable gates with warning signs and paved access roads.


Type of Contract:
Works

REQUIREMENT OF NEW VENDORS FOR STEEL FABRICATION WITH BHEL MATERIAL

Bharat Heavy Electricals Limited | Published September 30, 2016  -  Deadline September 28, 2017
Outsourcing, BHEL, Tiruchirappalli invites new vendors located within 350 km from BHEL Tiruchirapalli for fabrication of steel items / boiler components such as Boiler Columns, Auto Welded Beams and Bracings, Boiler Ducts, General Fabrication of Structures, Galvanized / Painted Handrails, Stairs, Round Corners, Metallic Expansion Bellows, Punching, Pressing and Shearing Jobs, Retainers, Tapping Points, Shaped Plates / Filler Plates, Venturi-meter, Flow-meter, Buckstay, Pleated Panels, Ceiling girder, Doors, Drain oil tank, Feeders, Foundation materials, Gate, Hanger and suspensions, Machining, Oil gun assembly, Oil system, Seal box, Sheet metal works and SS fabrication and Blasting and Painting of Fabricated Boiler components.

Thermal Analysis Equipment for Thermal Energy Research accelerator (T-ERA) Laboratory

School of Engineering | Published November 19, 2016  -  Deadline December 5, 2016
The University of Warwick , School of Engineering, Thermal Analysis Equipment . The requirement consists of 5 lots as follows-

Lot 1 - Xenon Flash (or similar) analyser for thermal conductivity, diffusivity measurement
Lot 2 - Calorimeter
Lot 3 - Dilatometer/Thermomechanical analyser
Lot 4 - Heat Flow Meter
Lot 5 - High Pressure Simultaneous Thermal Analyser (TG and DSC)

Please refer to http://in-tendhost.co.uk/universityofwarwick for further information. You will be able to download the full tender documents from this site. Any queries in relation to this requirement should be directed to the University of Warwick via the correspondence functionality of the In-tend system. Failure to do so may result in queries being excluded from the procedure.

All queries must be sent via In-tend Correspondence and not directly to University staff.

NOTE: The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Advertisement of any contract in the Official Journal of the European Union or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

All bids must be received by midday 5th December, 2016

Thermal Analysis Equipment for Thermal Energy Research accelerator (T-ERA) Laboratory

University of Warwick | Published November 22, 2016  -  Deadline December 5, 2016

The University of Warwick, School of Engineering, Thermal Analysis Equipment. The requirement consists of 5 lots as follows:

Lot 1 — Xenon Flash (or similar) analyser for thermal conductivity, diffusivity measurement.

Lot 2 — Calorimeter.

Lot 3 — Dilatometer/Thermomechanical analyser.

Lot 4 — Heat Flow Meter.

Lot 5 — High Pressure Simultaneous Thermal Analyser (TG and DSC).

Please refer to http://in-tendhost.co.uk/universityofwarwick for further information. You will be able to download the full tender documents from this site. Any queries in relation to this requirement should be directed to the University of Warwick via the correspondence functionality of the In-tend system. Failure to do so may result in queries being excluded from the procedure.

All queries must be sent via In-tend Correspondence and not directly to University staff.

NOTE: The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Advertisement of any contract in the Official Journal of the European Union or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

All bids must be received by midday 5.12.2016.

Supply of metering devices of thermal energy

МУНИЦИПАЛЬНОЕ КАЗЕННОЕ УЧРЕЖДЕНИЕ #034;ЦЕНТРАЛИЗОВАННАЯ БУХГАЛТЕРИЯ#034; | Published October 12, 2016  -  Deadline October 20, 2020
Electromagnetic flow-meter 32-GS (terminal C1) 26.51.52.190 PCs 4,00 20 664,67 82 658,68 the Thermocouples D-4 L=80 26.51.52.190 set of 3.00 2 937,33 8 811,99 Calc 26.51.52.190 16 PCs 4,00 451,67 65 806,68 Thermocouple D-4 L=60 26.51.52.190 PCs 4,00 1 488,00 5 952,00 power supply 26.51.52.190 PCs 12,00 770,33 9 243,96 Thermocouple D-4 L=60 26.51.52.190 set 1,00 2 2 980,33 980,33 Electromagnetic flowmeter 32-GS (terminal D) 26.51.52.190 PCs of 2.00 19 158,33 38 316,66 Converter overpressure 26.51.52.190 pieces 12,00 3 707,33 44 487,96 Electromagnetic flow meter 20-GS (terminal C1) 26.51.52.190 PCs 6,00 19 116 022,00 of 337.00 total: 374 280,26

Supply peakflowmeters

ГОСУДАРСТВЕННОЕ БЮДЖЕТНОЕ УЧРЕЖДЕНИЕ ЗДРАВООХРАНЕНИЯ АСТРАХАНСКОЙ ОБЛАСТИ #034;ОБЛАСТНАЯ ДЕТСКАЯ КЛИНИЧЕСКАЯ БОЛЬНИЦА ИМЕНИ Н.Н. СИЛИЩЕВОЙ#034; | Published October 12, 2016  -  Deadline October 20, 2020
Peak flow meter 26.60.12.124 PCs 3,00 8 000,00 24 000,00 total: 24 000,00

Irrigation Well - 28D

Department of Agriculture, Agricultural Research Service | Published November 30, 2016  -  Deadline December 13, 2016
The USDA, ARS, US Meat Animal Research Center, has a requirement for construction of 1 cased irrigation well with the installation of a vertical turbine pump, motor, check valve, flow meter, flowtube and butterfly valve at Clay Center, NE.  Legal description of well location:  NW1/4 Section 20-T6N-R7W, USMARC designation 28D.
The work includes, but is not limited to the following:  The successful contractor shall be responsible for furnishing all plant, labor, equipment, materials, transportation, and supervision in performing all operations required for providing the new irrigation well and vertical turbine pump and motor.  All materials as specified and the proper installation of all material in accordance with the terms, conditions and specification/statement of work contained in the solicitation documents.  Solicitation number is AG-6538-17-0024 and will be issued as a Request for Quotes (RFQ), and incorporates the provisions and clauses in effect through Federal Acquisition Circular 2005-88.  This acquisition is a Total Small Business set-aside.  The contract performance period is 60 days from the Notice to Proceed date.  A pre-bid/site visit will be scheduled and information provided in the solicitation package.  A firm-fixed price contract will be awarded. Contractors are required to register or update their registration at the System for Award Management (SAM) website at www.sam.gov in order to receive a contract award under this solicitation.  Payment and Performance Bonds will be required after contract award.  All interested responsible sources may submit a written quote which shall be considered by the agency.  The North American Industry Classification System (NAICS) Code is 237110 and the small business size standard is $36.5 million.  Magnitude of proposed construction is between $25,000 and $100,000.  The complete solicitation package and related documents will be posted on the FedBizOpps Website: http://www.fbo.gov  within the next 15 days.  All interested parties are responsible for monitoring this website to ensure they have the most current information (i.e. Amendments) for the solicitation.  No paper solicitation will be available.
This procurement requires the use of biobased products to the extent that such products are reasonably available, meet agency or relevant industry performance standards, and are reasonably priced. Where available, these products should first be acquired from among qualified products that fall under the umbrella of items designated through the USDA BioPreferred SM Program.
The Contractor must comply with the Farm Security and Rural Investment Act of 2002 (FSRIA), 7 U.S.C. 8102; the Food, Conservation and Energy Act of 2008 (FCEA), 7 U.S.C. 8102; the Federal Acquisition Regulation; Executive Order (EO) 13514, "Federal Leadership in Environmental, Energy and Economic Performance," dated October 5, 2009; EO 13423, "Strengthening Federal Environmental, Energy, and Transportation Management," dated January 24, 2007; and Presidential Memorandum, "Driving Innovation and Creating Jobs in Rural America through Biobased and Sustainable Product Procurement," dated February, 2012 to provide biobased products.
 

VOLUMETRIC Threaded meter (508)

Kretslopp och vatten, Göteborgs stad | Published November 23, 2016  -  Deadline December 16, 2016
Request refers framework agreement for Recycling and underwater need volymmetrika flow meter during the period 2017 - 2019 with a possible extension. The annual volume estimated at approximately 1750 pieces / year.

VOLYMETRISKA KOPPLINGSMÄTARE (508)

Kretslopp och vatten, Göteborgs stad | Published November 23, 2016  -  Deadline December 16, 2016
Request refers framework agreement for Recycling and underwater need volymmetrika flow meter during the period 2017 - 2019 with a possible extension. The annual volume estimated at approximately 1750 pieces / year.

Gołymin-Center: Supply of fuel oil to the Office of Municipalities and schools in the commune Gołymin-Center

Gmina Gołymin-Ośrodek | Published July 27, 2016  -  Deadline December 31, 2017
1. The contract is: gradual delivery of heating oil during the period from 01.10.2016 r. To 31.12.2017 r. In the amount of the estimated 160 000 liters of the following oil boiler rooms located in the municipality of Gołymin-Center: Municipal Office in Gołyminie-Centre - 18 000 liters (3000 l tanks) team Educational Institutions in Gołyminie-Center - 124 000 liters (16 tanks, 000 l) School filial in Gostków - 18,000 liters (3,000 l tanks) 2. quantitative demand for heating oil, referred to in paragraph. 1, is anticipated, estimated (+/-) demand during the period of the contract and is not binding on the Purchaser. 3. Deliveries will take place gradually, as necessary, in each case at the request of the Municipal Office or school (sent by fax or e-mail), stating the amount of fuel oil. 4. Settlement respective delivery will take place on the basis of the quantities actually supplied oil (as specified by the flow meter). Invoices shall be issued depending on the place of delivery at the Municipal Office Gołymin-center or team Educational Institutions in Gołyminie-Center. 5. The Contractor is obliged to provide transport oil transport to the adapted, ie. Tank trucks equipped with a calibrated flow meter printer, the pump suction - forcing. 6. Supplied amount of heating oil must be billed according to the volume of fuel sales system based on m3 in the reference temperature 15 ° C. 7. Oil will be delivered on weekdays. 8. The Contractor is obliged to deliver heating oil within 2 working days of filing the application each time by the Municipal Office or school. For each delivery of fuel oil the Contractor shall provide the following: - issued by the manufacturer's quality certificate, confirming the physico - chemical properties, which must have supplied oil. - The current legalization flowmeter certified by the Office of Weights and Measures. Contractor shall be responsible for the execution of the whole contract ..