Public tenders for coal in Arlington-virginia United States

Find all Energy tenders in the world.
Finding business opportunities has never been easier.

Results for energy. Make a new search!
EnergycoalUnited Statesarlington-virginia

Request for Quote for a Desk Study on the Mongolia Naryn Sukhait Coal Bed Methane Recovery and Utilization Project

United States Trade and Development Agency, USTDA Contracts Office | Published April 10, 2015  -  Deadline March 27, 2015
cpvs

Link To Document

Request for Quote for a Desk Study on Enhanced Coalbed Methane Development and Carbon Dioxide Storage in India

United States Trade and Development Agency, USTDA Contracts Office | Published August 24, 2015  -  Deadline September 4, 2015
cpvs

This is a combined synopsis/solicitation for commercial item prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6 and procedures in Subpart 13.1 as supplemented with additional information included in this notice. This announcement constitutes the only Request for Quote (RFQ); quotations are being requested and written solicitation will not be issued. This solicitation is being issued In Accordance With (IAW) FAR Subpart 13.104. The Government will award a contract resulting from this solicitation to the RFQ respondent who is deemed responsible and is determined, based on the evaluation factors, to represent the best value to the Government. This procurement is a 100 percent Small Business Set-Aside with a small business size standard of $15M annual sales under NAICS Code 541690. Award is limited to U.S. Firms or U.S. individuals. Contractor and subcontractor personnel used shall be either U.S. citizens on non-U.S. citizens lawfully admitted for permanent residence in the United States. Contractor use of subcontractors is limited to less than fifty percent of the proposed price. The Government intends to award a Firm-Fixed-Price (FFP) purchase order. There is no travel involved with this requirement. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83. USTDA intends to contract with a U.S. firm (Contractor) to perform a Desk Study (DS) to assess: (1) whether or not the project meets USTDA's basic funding criteria (above); (2) recommend the appropriate Terms of Reference (TOR) for the study; and (3) develop an appropriate budget for the TOR recommended for the study. This DS would review a proposal for a feasibility study to establish a commercial enhanced coalbed methane (ECBM) recovery project within the Raniganj East Coalbed Methane (CBM) field in India. ECBM takes captured CO2 (that would otherwise be emitted to the atmosphere) and injects the CO2 into coal seams to stimulate additional production of methane, and then permanently sequesters the CO2.

India - Integrated Wind, Solar, and Energy Storage Project Technical Assistance

United States Trade and Development Agency, USTDA | Published May 26, 2015  -  Deadline July 12, 2015
cpvs

Proposal Submission Place: Mr. Sameer Parikh Vice President IL & FS Energy Development Company Limited 1st Floor, Corporate Office Tower Ambience Mall Complex Ambience Island , NH-8 Gurgaon - 122001, India Phone: +91 124 471 6100 Fax: +91 124 471 6120 The Grantee invites submission of qualifications and proposal data (collectively referred to as the "Proposal") from interested U.S. firms that are qualified on the basis of experience and capability to develop a technical assistance (TA) project for IL & FS Energy Development Company Limited (IEDCL) that would assess the technical, financial and commercial viability of grid interactive renewable energy storage technologies for two planned renewable energy projects. IEDCL, one of the largest wind power producer in India, plans to construct 1,150 Megawatts (MW) of solar photovoltaic (PV) and wind integrated projects in the states of Andhra Pradesh and Gujarat over the next five years. Through the use of fully integrated energy storage infrastructure, the planned project would be developed as power generation parks that would supply dispatchable utility scale renewable energy to the power grid for the first time in India. The objective of this TA would be to undertake techno economic feasibility of grid interactive Energy Storage technologies for integration with wind and Solar PV projects, and recommend appropriate technology options with an optimal configuration for the project highlighting the necessary regulatory framework to be introduced. The Government of India (GOI) has mandated that 15 percent of the country's power consumption must be generated from renewable energy sources by 2020, from a current base of about 5-6 percent. Currently, India is generating over 30,000 MW of renewable energy at an annual growth rate of 19 percent. Indian states such as Tamil Nadu and Gujarat, which have high levels of renewable energy generation, are already suffering from transmission capacity constraints that prevent the evacuation of electricity during peak times and seasons. With significant wind and solar capacity additions expected in the coming years, India's power grid will continue to face severe transmission capacity constraints and stability issues. Energy storage technologies represent a potential solution for electricity systems that support significant amounts of renewable energy power generation. These technologies are evolving into potentially crucial components of India's overall energy development strategy, as they provide utility companies with multiple power management benefits, including time shifting, grid stabilization, shaving of peak demand, improved generation efficiency, and improved utilization of transmission capacity. IEDCL has close to 1500 MW of power generation projects in operation or about to be commissioned, and another 1500 MW under construction. These projects include conventional gas and coal thermal as well as wind, solar, and biomass based power generation. IEDCL is India's one of the largest private developer of wind farms, and is also a private provider of power transmission services, placing the utility in a strong position to take advantage of storage opportunities from both generation and transmission operations. IEDCL is a subsidiary of the Indian company Infrastructure Leasing & Finance Services (IL&FS). Established in 1987, IL&FS is a pioneer of public-private partnerships (PPP) in India. The company has developed the largest number of lane kilometers of Build-Operate-Transfer road assets in India, the country's first private metrorail as well as waste-to-energy, real estate, and education PPPs. In the financial sector, IL&FS pioneered the first infrastructure private equity and debt funds in India and has acted as a syndicator for numerous projects, with $3.2 billion under its management. As India's largest wind energy producer, IEDCL's aims to be an innovator in the development and application of energy storage technologies. Currently, the company is planning to construct two solar PV and wind integrated power systems with energy storage facilities: a 1000 MW integrated power system in the Ananthpur District of Andhra Pradesh and a similar but smaller scale 150 MW power system in the village of Nana Layja located in the Kutch District of Gujarat. Together these two sites, known as IEDCL's integrated wind, solar and energy storage initiative, will be developed over the course of three phases in five years, from 2015 to the year 2020, as power generation parks with fully integrated energy storage facilities that will supply dispatchable utility scale renewable energy to India's power grid. The first phase would be an initial 27MW project in Andhra Pradesh (known as Phase 1A) at a site already owned by IEDCL. In fact, IEDCL is already generating 6.5 MW of wind power at the site and has basic power evacuation infrastructure already in place. IEDCL has requested USTDA funding for this TA project to evaluate and recommend energy storage technologies for the integrated wind, solar and energy storage project and recommend an integrated wind, solar and energy storage design applicable to both project sites. The energy storage component of the TA project will primarily focus on the various types of battery technologies currently available and emerging in the Indian market. IEDCL is currently in discussions with U.S. companies, Imergy and GE, to explore the possibility of implementing U.S. battery powered energy storage systems for the integrated wind, solar and energy storage project. The TA analysis will include a detailed economic and financial analysis, a regulatory analysis, and a specific feasibility study for Phase 1A. The TA will provide IEDCL with an overall plan for the entire 1,150 MW that will enable dispatchable wind and solar PV generation. If successful, the integrated wind, solar and energy storage project would ultimately serve as a model for the development of additional utility scale integrated renewable energy and energy storage projects in India. In particular the implementation of these technologies would help improve the overall reliability of the electric power grid; increase the delivery of power by eliminating the need for renewable energy producers to decrease production when the grid is overburdened; generate additional electricity during peak power periods; enable a scheduled dispatch of renewable energy; facilitate the establishment of interstate power purchase agreements; and reduce carbon emissions that mitigate the threat of climate change. The U.S. firm selected will be paid in U.S. dollars from a $898,000 grant to the Grantee from the U.S. Trade and Development Agency (USTDA). A detailed Request for Proposals (RFP), which includes requirements for the Proposal, the Terms of Reference, and portions of a background definitional mission/Definitional Mission report are available from USTDA, at 1000 Wilson Boulevard, Suite 1600, Arlington, VA 22209-3901. To request the RFP in PDF format, please go to: https://www.ustda.gov/businessopps/rfpform.asp Requests for a mailed hardcopy version of the RFP may also be faxed to the IRC, USTDA at 703-875-4009. In the fax, please include your firm's name, contact person, address, and telephone number. Some firms have found that RFP materials sent by U.S. mail do not reach them in time for preparation of an adequate response. Firms that want USTDA to use an overnight delivery service should include the name of the delivery service and your firm's account number in the request for the RFP. Firms that want to send a courier to USTDA to retrieve the RFP should allow one hour after faxing the request to USTDA before scheduling a pick-up. Please note that no telephone requests for the RFP will be honored. Please check your internal fax verification receipt.Because of the large number of RFP requests, USTDA cannot respond to requests for fax verification. Requests for RFPs received before 4:00 PM will be mailed the same day. Requests received after 4:00 PM will be mailed the following day. Please check with your courier and/or mail room before calling USTDA. Only U.S. firms and individuals may bid on this USTDA financed activity. Interested firms, their subcontractors and employees of all participants must qualify under USTDA's nationality requirements as of the due date for submission of qualifications and proposals and, if selected to carry out the USTDA-financed activity, must continue to meet such requirements throughout the duration of the USTDA-financed activity. All goods and services to be provided by the selected firm shall have their nationality, source and origin in the U.S. or host country. The U.S. firm may use subcontractors from the host country for up to 20 percent of the USTDA grant amount. Details of USTDA's nationality requirements and mandatory contract clauses are also included in the RFP. Interested U.S. firms should submit their Proposal in English directly to the Grantee by 10:00 AM IST, on July 13, 2015 at the above address. Evaluation criteria for the Proposal are included in the RFP. Price will not be a factor in contractor selection, and therefore, cost proposals should NOT be submitted. The Grantee reserves the right to reject any and/or all Proposals. The Grantee also reserves the right to contract with the selected firm for subsequent work related to the project. The Grantee is not bound to pay for any costs associated with the preparation and submission of Proposals.

Anemometer Calibration Services

Department of Labor, Mine Safety and Health Administration | Published March 9, 2016  -  Deadline April 8, 2016
cpvs

RFQ - SOLICITATION DOL-MSH-16-Q-0008 ID/IQ Program for Anemometers Calibration Services In accordance with Federal Acquisition Regulation (FAR) Subpart 12.6 - Streamlined Procedures for Evaluation and Solicitation for Commercial Items, the MSHA is hereby issuing a combined synopsis/solicitation to establish an "ID/IQ Program for Anemometer Calibration Services." The Mine Safety and Health Administration (MSHA) intends to establish a single award Indefinite Delivery/Indefinite Quantity (ID/IQ) contract program for the purpose of obtaining calibration services across all of its regions. It is anticipated that as a result of this combined synopsis/solicitation, the responsible and successful offeror will be issued an ID/IQ contract and the selected offeror will comprise the ID/IQ program titled "ID/IQ Program for Anemometer Calibration Services." Currently there is a single award contract for these services which has been extended through 30 June 2016.Over the next five (5) years, MSHA anticipates approximately 1300 low speed and 130 high speed anemometers will be calibrated each year although quantities are not definite, the establishment of this ID/IQ program is intended to result in economies by significantly reducing procurement lead-times, promote adequate competition among pre-selected highly rated suppliers, and achieve agency goals in utilizing small business concerns. The North American Classification System (NAICS) code for this agreement is as follows: Number Description Size Standard541380 Calibration and Certification testing laboratories or services 500 Employees Period of Performance The government contemplates awarding a single ID/IQ contract with a one-year base period and four (4) one-year option periods. Base Period: July 1, 2016 through June 30, 2017Option Year 1: July 1, 2017 through June 30, 2018Option Year 2: July 1, 2018 through June 30, 2019Option Year 3: July 1, 2019 through June 30, 2020Option Year 4: July 1, 2020 through June 30, 2021 ID/IQ Contract Quantity Limits 1. Minimum Guaranteed Amount The minimum that the government agrees to order per ID/IQ contract shall be $21,250.00 during the period of this contract. The guaranteed minimum applies only if the contract expires or the contract cancellation is initiated by the government. The guaranteed minimum does not apply if the contract is terminated for cause. 2. Maximum Order Amount The maximum ordering amount per ID/IQ contract shall not exceed $900,000.00 over the life of the contract, or the five (5) year period. Ordering This IDIQ contract is established to acquire anemometer calibration services for MSHA Coal Division; while the use of this ID/IQ contract program is highly encouraged, it is not a mandatory source of supply. Provisions by Reference52.204-16 - Commercial and Government Entity Code Reporting (Nov 2014)52.204-7 - System for Award Management (July 2013)52.209-7 - Information Regarding Responsibility Matters (July 2013) Clauses by Reference52.204-18 - Commercial and Government Entity Code Maintenance (Nov 2014)52.204-13 - System for Award Management Maintenance (July 2013)52.212-4 - Contract Terms and Conditions -- Commercial Items (Dec 2014)52.217-5 - Evaluation of Options52.217-8 - Option to Extend Services52.217-9 - Option to Extend the Term of the Contract52.232-40 - Providing Accelerated Payments to Small Business Subcontractors (Dec 2013)52.245-1 - Government Property (July 2013) 52.212-1 -- Instructions to Offerors -- Commercial Items Offerors responding to this combined synopsis/solicitation are required to have been in business for at least five (5) years. Being in business is defined as having been a reseller or dealer of commercial products that are similar in scope to this requirement. This requirement shall be met at the time of the solicitation closing date, no exceptions will be granted. Offerors that submit proposals who do not meet this requirement will be disqualified and eliminated from consideration. Offerors must have the financial resources and the technical ability to establish lines of credit and to qualify as authorized or certified dealers, resellers, or similar partner arrangements allowing for the fulfillment of MSHA requirements. This is a total small business set-aside. Any proposals received from concerns that are not small business concerns shall be considered nonresponsive and will be rejected. To be eligible for award of an ID/IQ contract in this program, interested small business concerns shall submit the following: 1. A cover page with basic company information, DUNS, and the NAICS code from page 1 of this solicitation for which the company is certified as a small business, and the small business socio-economic type if applicable. 2. A capabilities statement addressing its relevant experience, qualifications (i.e. Original Equipment Manufacturer reseller certifications or authorizations). 3. As part of the Government's past performance evaluation process, the MSHA intends to use an offeror's Dun & Bradstreet/Open Ratings. The offeror is required to submit past performance references through Dun & Bradstreet/Open Ratings (D&B) prior to submission of its offer. A minimum of four (4) references must be provided on the request order to be processed by D&B, (https://www.supplierriskmanager.com/ppe-order/login.seam). However, D&B recommends providing up to 20 references to ensure D&B receives at least four completed responses. It is strongly recommended that the offeror proactively contact its references to request that they promptly respond to the D&B inquiries for past performance. The requests for past performance by D&B will be sent by email and will be filled out on an on-line survey. Any Offeror not receiving a past performance evaluation from D&B may risk receiving a "neutral" rating under the past performance factor. D&B charges $190.00 for the past performance evaluation service, and Offerors are responsible for direct payment to D&B. Each offeror must submit, with its quote, a confirmation that the past performance evaluation has been submitted to D&B. Confirmations of order for the Open Ratings report must include a screenshot of the order or a receipt from D&B, acknowledging the order. D&B will provide the offeror who submitted the request for past performance a copy of the evaluation and will forward a copy to the MSHA. Please provide D&B with the following information as a contact: Marvin Ross, Contract Specialist, Mine Safety and Health Administration, 201 12th ST. South, 4E557, Arlington, VA 22202, email: ross.marvin@dol.gov and phone: 202-693-9837. ¬¬¬¬¬¬The MSHA will consider the results of the D&B report as a part of its evaluation of the offeror's past performance; however, the government reserves the right to examine any available past performance information in conducting the evaluation of an offeror's past performance. Offeror's references may include any contracts with the United States Federal Government, agencies within State and Local governments, and commercial customers. References from Governmentwide Acquisition Contracts (GWACs) which have not resulted in any awards will not be considered a valid past performance reference. Contracts may be current contracts or completed contracts. Completed contracts must have been awarded or completed within the three years prior to the proposal due date noted in this solicitation. Offerors shall have had, as of the proposal due date, at least one year of experience with the referenced customer. References are specific to the offeror. If the offeror was recently acquired or merged with another entity, the references submitted must directly pertain to the experience of the offeror. The experience of parent corporations, subsidiaries, or affiliates will not be considered. Submission Instructions Only electronic responses will be accepted, offerors shall respond to the CS email address: ross.marvin@dol.gov. Responses shall not exceed 20 pages in total using 12 PT fonts. All proposals must arrive on the government's servers on or before the due date. The due date for proposals is no later than 1:00 p.m. Contracting Officer's Local Time, April 8, 2016. All questions must be submitted by email no later than 5:00 p.m. Contracting Officer's Local Time, March 21, 2016 to ross.marvin@dol.gov. The questions will be answered and provided as an amendment to this synopsis/solicitation. Primary Point of Contact:Marvin RossContract SpecialistEmail: ross.marvin@dol.govPhone: 202-693-9837 Secondary Point of Contact:Tirene CrowellContracting OfficerEmail: crowell.tirene@dol.govPhone: 202-693-9867 (End of Provision) 52.212-2 -- Evaluation -- Commercial Items The MSHA will award a single ID/IQ contract resulting from this solicitation to the responsible small business vendor whose proposal conforming to the solicitation will be most advantageous to the MSHA for inclusion in the program, all stated factors considered. The following factors shall be used to evaluate proposals: 1. Technical Capability IAW attachment A Statement of Work.2. Past performance3. Relevant experience 4. Price, based on pricing samples of Attachment B Factors 1, 2, and 3 are considered equal and when combined are significantly more important than Factor 4, price. (End of Provision) 52.212-3 -- Offeror Representations and Certifications -- Commercial Items (Mar 2015) The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision. (a) Definitions. As used in this provision-- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. "Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation," means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). "Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except- (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Small disadvantaged business concern, consistent with 13 CFR 124.1002," means a small business concern under the size standard applicable to the acquisition, that-- (1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by-- (i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and (ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and (2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern -- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (p) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] (c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that- (i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ___________________________________________ (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that-- (i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and (ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246 -- (1) Previous contracts and compliance. The offeror represents that -- (i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It [_] has, [_] has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that -- (i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or (ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American - Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g) (1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No.: _________________________________[List as necessary] (3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act'': Canadian or Israeli End Products: Line Item No.: Country of Origin:[List as necessary] (4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No.: Country of Origin: [List as necessary] (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products Line Item No.: Country of Origin: [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals-- (1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [_] Have, [_] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and (3) [_] Are, [_] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) [_] Have, [_] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).] (1) Listed End Product Listed End Product: Listed Countries of Origin: (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. [_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [_] Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Labor Standards. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] (1) [_] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [_] does [_] does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. (2) [_] Certain services as described in FAR 22.1003-4(d)(1). The offeror [_] does [_] does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). [_] TIN:_____________________. [_] TIN has been applied for. [_] TIN is not required because: [_] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; [_] Offeror is an agency or instrumentality of a foreign government; [_] Offeror is an agency or instrumentality of the Federal Government; (4) Type of organization. [_] Sole proprietorship; [_] Partnership; [_] Corporate entity (not tax-exempt); [_] Corporate entity (tax-exempt); [_] Government entity (Federal, State, or local); [_] Foreign government; [_] International organization per 26 CFR 1.6049-4; [_] Other ____________________. (5) Common parent. [_] Offeror is not owned or controlled by a common parent: [_] Name and TIN of common parent: Name ____________________________________ TIN ______________________________________ (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations- (1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4. (2) Representation. By submission of its offer, the offeror represents that- (i) It is not an inverted domestic corporation; and (ii) It is not a subsidiary of an inverted domestic corporation. (o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran.(1) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (2) Representation and Certification. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror- (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and (iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,000 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50(U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf). (3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. (p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a DUNS Number in the solicitation. (1) The Offeror represents that it [ ] has or [ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture. (2) If the Offeror indicates "has" in paragraph (p)(1) of this provision, enter the following information: Immediate owner CAGE code:_____________________________________________ Immediate owner legal name:______________________________________________ (Do not use a "doing business as" name) Is the immediate owner owned or controlled by another entity: [ ] Yes or [ ] No. (3) If the Offeror indicates "yes" in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information: Highest level owner CAGE code:_____________________________________________ Highest level owner legal name:______________________________________________ (Do not use a "doing business as" name) (End of Provision)52.212-5 -- Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (Mar 2015)(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Dec 2014)(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)).(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:_X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402)._X__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509)._X__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009)._X__ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Jul 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note).___ (5) [Reserved]___ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).___ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Aug 2013) (31 U.S.C. 6101 note).
  • 1