Public tenders for welding-equipment

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!
Electricalwelding equipment

welding equipment

Eigenfinanzierung | Published January 1, 1970  -  Deadline August 20, 2023
cpvs

"Apparatus for soldering soft and firm solder or welding machines and apparatus for surface tempering and hot spraying, electric" code 27.90.3 016-2010 for DC (welding equipment, code 42662000-4 021-2015 for GC) ( rectifier inverter)

КП "Киевский Метрополитен" | Published November 17, 2016  -  Deadline November 20, 2021
cpvs
03328913, 42662000

Rectifier inverter "Paton" VDY-250E

Set welding equipment optical fiber

Служба безпеки України, Управління спеціального звязку | Published November 15, 2016  -  Deadline November 20, 2018
cpvs
20003756, 38044256, 42662000

not defined

Request for Quotation - Provision Of Industrial And Welding Equipment For Chehim Technical Institute- Ref: LEB/CO/RFQ/210/17

UNDP Country Office - LEBANON | Published December 21, 2017  -  Deadline January 4, 2018
cpvs

Dear Sir / Madam:We kindly request you to submit your quotation for Provision Of Industrial And Welding Equipment For Chehim Technical Institute, as detailed in Annex 1 of this RFQ. When preparing your quotation, please be guided by the form attached hereto as Annex 2. Quotations may be submitted on or before January 4, 2018 at 3:00 p.m. Beirut Local Time and via e-mail, or via courier mail or by hand to the address below: United Nations Development ProgrammeProcurement Unit, UNDP LebanonRoom # 310, 3rd FloorArab African International Bank Building, Riad El Solh StreetNejmeh, Beirut 2011 5211, LebanonTel: +961 1 962 500Fax: +961 1 962 491E-mail: lb.bidding@undp.org Quotations submitted by email must be limited to a maximum of 8 MB, virus-free and no more than 2 email transmissions. They must be free from any form of virus or corrupted contents, or the quotations shall be rejected. It shall remain your responsibility to ensure that your quotation will reach the address above on or before the deadline. Quotations that are received by UNDP after the deadline indicated above, for whatever reason, shall not be considered for evaluation. Please take note of the following requirements and conditions pertaining to the supply of the abovementioned good/s.Kindly find attached the related bidding documents.

Welding equipment - welding machines

Instituto do Emprego e da Formação Profissional, I. P. | Published December 6, 2017  -  Deadline December 26, 2017
Winner
AIR LIQUIDE SOLDADURA LDA
cpvs
43000000

Welding equipment - welding machines

Welding equipment - welding machines

Instituto do Emprego e da Formação Profissional, I. P. | Published December 6, 2017  -  Deadline December 26, 2017
Winner
ELECTRO-ARCO, S.A.
cpvs
43000000

Welding equipment - welding machines

Medical equipments

Állami Egészségügyi Ellátó Központ | Published November 11, 2017  -  Deadline December 21, 2017
cpvs
33100000, 31524110, 33192230, 33161000, 45350000, 45317000, 33191100, 33191110

Procurement of surgical equipment and sterilization equipment (2 parts) for the project "Development and Infrastructure Development of the Cardiology and Cardiac Surgery Center at the Zala County Hospital" (SIOP-2.2.4-09 / 1-2010-0015).

Part 1: Heating equipment.

Part 2: Sterilization equipment.

Procurement of surgical equipment and sterilization equipment (2 parts) for the project "Development and Infrastructure Development of Cardiology and Cardiac Surgery at the Zala County Hospital":

Part 1: Equipping equipment

2 electrically operated operating tables

8 LED lighting lamps

2 cell phone lamps 45,000 lux

1 pillar lamp with medical plug, socket

2 ceiling test lamps

15 mobile test lamps 25 000 lux

3 pieces of perfusor anesthesia

2 high-frequency cutter coagulators

1 x C arc image enhancer

Part 2Sterilization Equipment

3 steam sterilizing autoclaves 8 STE

1 steam, steam formaldehyde sterilizer, 4 STE

1 set of sterilizing, transport containers

1 UH cleaner

12 DIN 1/1 capacity

1 dishwasher 8 DIN 1/1 capacity

2 foil welding equipment (wrapping, date stamping)

1 foil roll holder with built-in cutter

2 wash-over-gun pistols

3 pieces of stainless steel rolling sterile container.

Procurement of surgical equipment and sterilization equipment (2 parts) for the project "Development and Infrastructure Development of Cardiology and Cardiac Surgery at the Zala County Hospital":

Part 2Sterilization Equipment

3 steam sterilizing autoclaves 8 STE

1 steam, steam formaldehyde sterilizer, 4 STE

1 set of sterilizing, transport containers

1 UH cleaner

12 DIN 1/1 capacity

1 dishwasher 8 DIN 1/1 capacity

2 foil welding equipment (wrapping, date stamping)

1 foil roll holder with built-in cutter

2 wash-over-gun pistols

3 pieces of stainless steel rolling sterile container.

Laser Welding Equipment

AMRC | Published November 28, 2017  -  Deadline December 18, 2017
cpvs
42610000

1845/358/EML/NW/17 Laser Welding Equipment

The University of Sheffield wishes to invite tenders for laser welding equipment on behalf of the Advanced Manufacturing Research Centre, North West group based in Preston, Lancashire.

Scope of Requirement:
The objective is to procure a laser welding system suitable for the welding copper and aluminium components in battery modules for automotive, aerospace and domestic energy storage applications. The system will be installed in the AMRC Northwest interim facility in Preston, before being transferred into a specific battery development centre in Samlesbury.


Tender Process and Documentation:
This procurement is sub EU threshold open procedure The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://in-tendhost.co.uk/Sheffield

If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield

Completed tenders must be returned through the same e-tendering system.

Closing date for receipt of tenders: 18th of December 2017 at 12 noon (UK time).

1845/358/EML/NW/17 Laser Welding Equipment

University Of Sheffield | Published November 27, 2017  -  Deadline December 18, 2017
cpvs
42610000

1845/358/EML/NW/17 Laser Welding Equipment The University of Sheffield wishes to invite tenders for laser welding equipment on behalf of the Advanced Manufacturing Research Centre, North West group based in Preston, Lancashire. Scope of Requirement: The objective is to procure a laser welding system suitable for the welding copper and aluminium components in battery modules for automotive, aerospace and domestic energy storage applications. The system will be installed in the AMRC Northwest interim facility in Preston, before being transferred into a specific battery development centre in Samlesbury. Tender Process and Documentation: This procurement is sub EU threshold open procedure The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://in-tendhost.co.uk/Sheffield If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield Completed tenders must be returned through the same e-tendering system. Closing date for receipt of tenders: 18th of December 2017 at 12 noon (UK time).

34--TIG Welding Equipment

Department of the Army, FedBid | Published November 29, 2017  -  Deadline December 15, 2017
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is Eustis558CCW001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-96. The associated North American Industrial Classification System (NAICS) code for this procurement is 332999 with a small business size standard of 750.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-12-15 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Eustis, VA 23604The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Lincoln Electric part # KP2029-4B1 3/32 Collet for 9 and 20 series torches., 20, EA;LI 002: Lincoln Electric part # KP2013-4B1 3/32 Collet for 17 and 26 series torches., 20, EA;LI 003: Lincoln Electric part # KP2033-4B1 3/32 Gas Lens Collect Body for 9 and 20 series torches., 10, EA;LI 004: Lincoln Electric part # KP2034-4B1 3/32 Gas Lens Collet Body for 17 and 26 series torches., 10, EA;LI 005: Lincoln Electric part # KP2019-1B1 Alumina gas lens nozzle 1/4 orifice, 5, EA;LI 006: Lincoln Electric part # KP2019-2B1 Alumina gas lens nozzle 5/16 orifice, 10, EA;LI 007: Lincoln Electric part # KP2019-3B1 Alumina gas lens nozzle 3/8 orifice, 10, EA;LI 008: Lincoln Electric part # KP2019-4B1 Alumina gas lens nozzle 7/16 orifice, 10, EA;LI 009: Lincoln Electric part # KP2018-5B1 Alumina gas lens nozzle 1/4 orifice, 5, EA;LI 010: Lincoln Electric part # KP2018-4B1 Alumina gas lens nozzle 5/16 orifice, 5, EA;LI 011: Lincoln Electric part # KP2018-3B1 Alumina gas lens nozzle 3/8 orifice, 10, EA;LI 012: Lincoln Electric part # KP2018-2B1 Alumina gas lens nozzle 7/16 orifice, 10, EA;LI 013: Lincoln Electric part # KP2018-1B1 Alumina gas lens nozzle 1/2 orifice, 10, EA;LI 014: Lincoln Electric part # KP2018-6B1 Alumina gas lens nozzle 11/16 orifice, 5, EA;LI 015: Lincoln Electric part # K2412-1 Tig torch cable 15 ft. extension, 5, EA;LI 016: Packages of 10, 3/32" 2% Ceriated Grey Tungsten electrodes, 5, PG;LI 017: CK Worldwide linear amperage control, 15 FT. part # AMTCV-10-1-L6, 5, EA;Solicitation and Buy Attachments***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing” basis.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

Welding equipment

Moravskoslezský kraj | Published November 4, 2017  -  Deadline December 11, 2017
cpvs
42662000, 42636100

The subject of the public contract is the supply of virtual welding simulators incl. training of staff and equipment for welding workshops in 5 secondary schools of the Moravian-Silesian Region. These are mainly welding sources and, for example, hydraulic presses or plasma sources. The delivery is realized within the framework of the project "Modernization of Welding Teaching" financed by the IROP.

The subject of the public contract is divided into two parts according to Section 35 of the Act:

- Part 1: Delivery of welding trainers,

- Part 2: Supply of welding sources and other equipment for welding workshops.

The participant is entitled to submit a bid for one or both parts of the public contract.

A detailed specification of the subject of the public contract, including the technical conditions in the details necessary for the processing of the tender, shall specify the tender documentation.

Welding equipment

Zespół Szkół Mechanicznych nr 2 im. Tytusa Maksymiliana Hubera | Published October 27, 2017  -  Deadline December 6, 2017
cpvs
42662000

The subject of the order is the delivery, assembly and commissioning of new (year of production not older than 2017) welding equipment and accessories for the needs of vocational training in the School of Mechanical Engineering No. 2 in Bydgoszcz located at ul. Słoneczna 19 - within the scope and under terms and conditions specified in the Terms of Reference, including the "Description of the subject matter of the order" - Annexes 1 to SIW and the contract template.

The subject of the order includes:

1) delivery and assembly of the equipment in the place indicated by the Ordering Party,

2) conduct training in the field of operation, use and maintenance,

3) providing instruction manuals for particular elements in Polish,

4) preparation and delivery to the Contracting Authority of documents proving the proper performance of the subject matter of the contract (eg assurances, warranty cards, operating and maintenance instructions) in Polish.

The subject of the order is the delivery, assembly and commissioning of new (year of production not older than 2017) welding equipment and accessories for the needs of vocational training in the School of Mechanical Engineering No. 2 in Bydgoszcz located at ul. Słoneczna 19 - within the scope and under terms and conditions set out in SIWZ with annexes, including in the "Description of the subject of the order" - Attachments No. 1 to SIWZ and the model contract.

The subject of the order includes:

1) delivery and assembly of the equipment in the place indicated by the Ordering Party,

2) conduct training in the field of operation, use and maintenance,

3) providing instruction manuals for particular elements in Polish,

4) preparation and delivery to the Contracting Authority of documents proving the proper performance of the subject matter of the contract (eg assurances, warranty cards, operating and maintenance instructions) in Polish.

Workshop equipment

Powiat Opatowski | Published November 30, 2017  -  Deadline December 6, 2017
cpvs
43800000, 16000000, 42600000, 37400000, 30200000

1. The subject of the order is the equipment of the School Complex No. 1 and School Complex No. 2 in Opatow and the Complex of Schools. Maria Skłodowska-Curie in Ozarow

The subject of the order has been divided into 8 tasks listed below:

Task No. 1 Agricultural Equipment School Complex No. 1

Task No. 2 Machining Machines School Complex No. 1

Task No. 3 Car Diagnosis School Complex No. 1

Task No. 4 Tools and Instruments School Complex No. 1

Task No. 5 Sports facilities School Complex No. 1

Task No. 6 Mechanical Equipment School Complex. Maria Skłodowska Curie in Ożarów

Task No. 7 Welding Equipment Maria Skłodowska Curie in Ożarów

Task No. 8 IT equipment. Maria Skłodowska Curie in Ożarów

The subject of the order is described in detail in Annex No. 7.1.7.2.7.4.7.4.7.5.7.6.7.7.7.8 to SIWZ.

Occupational clothing, special workwear and accessories

Provincie Limburg | Published October 31, 2017  -  Deadline December 5, 2017
cpvs
18100000

PROCLIM, the procurement center of the province of Limburg, wishes to conclude a framework agreement for a period of 4 years. The assignment is divided into 5 different lots:

- parcel 1: head protection, ear protection, respiratory protection, face protection and safety goggles,

- Lot 2: Foot protection,

- Lot 3: Hand protection,

- Lot 4: Welding - Equipment,

- Lot 5: Clothes.

Both the provincial institutions and the local public administrations in Limburg (cities, municipalities, OCMWs, police zones, etc.) can, if desired, participate in and enter into this framework agreement, after mandate.

Place of service: Province of Limburg - Provincial procurement center PROCLIM.

Place of delivery: Province of Limburg, Universiteitslaan 1, 3500 Hasselt, 011 / 23.71.11.

This lot concerns the supply of following materials: safety helmets, hearing protection, different types of masks, different types of spectacles.

This lot concerns the supply of following materials: safety shoes, safety boots, kitchen shoes, rubber boots, nursing shoe / broom.

This lot concerns the supply of: different types of work gloves.

This plot concerns the supply of: different requirements specific to welding.

This plot concerns the delivery of clothing and specific workwear such as: t-shirts, sweaters, polos, fleece, labs, aprons, boots, coats, hairbags, disposable overalls, work pants, workbags.

Numerically-controlled machines for metal

Centrum Kształcenia Zawodowego i Ustawicznego | Published November 21, 2017  -  Deadline December 5, 2017
cpvs
42632000, 42715000, 44510000, 39100000, 42623000, 42621000, 43414000, 42637200, 42662000, 42637000, 39162110, 39162100, 38410000

The subject of the order is the delivery of equipment to four workshops in the CKZiU:

Part 1: Equipment for the Upholstery

Part 2: Equipment of the CNC Machine-Controlled Machine Factory - delivery of the turning center and the machining center

Part 3: Equipment for Machining of Mechanical Loss in Metal - delivery of equipment

Part 4 of the order: Equipment of the Mechanical Machining Works in Metal - delivery of welding equipment

Part 5: Equipment for Machining of Mechanical Loss in Metal - delivery of hand tools

Part 6: Metrological laboratory equipment - delivery of equipment

Part 7: Other equipment

Project co-financed under Priority Axis 2: Human Resources; Action 2.4: Development of vocational education and training; Sub-measure 2.4.2: Development of vocational education and training - projects of the

ROP of the Warmian-Masurian Voivodship for the years 2014-2020 co-financed by the ESF.

Miscellaneous special-purpose machinery

MPower s.r.o. | Published November 3, 2017  -  Deadline December 4, 2017
cpvs
42990000

The subject of the contract is the delivery of the following equipment:

1. CNC plasma cutting machine (1 pc);

2. CNC vertical 3-axis OC with accessories (1 pc);

3. Radial drill (1 pc);

4. Pillar drill (1 pc);

5. Longitudinal saw (1 pc);

6. Welding apparatus 350A (2 pieces);

7. Welding inverter 160A 350A (2 pcs);

8. Manual inverter plasma (1 pc);

9. Welding equipment (2 sets);

10. Hand tools for locksmith work and assembly (1 unit);

Including transport, installation, wiring and test operation.

More detailed information on the subject of the contract is part of these tender documents.

Numerically-controlled machines for metal

Centrum Kształcenia Zawodowego i Ustawicznego | Published November 17, 2017  -  Deadline December 1, 2017
cpvs
42632000, 42715000, 44510000, 39100000, 42623000, 42621000, 43414000, 42637200, 42662000, 42637000, 39162110, 39162100, 38410000

The subject of the order is the delivery of equipment to four workshops in the CKZiU:

Part 1: Equipment for the Upholstery

Part 2: Equipment of the CNC Machine-Controlled Machine Factory - delivery of the turning center and the machining center

Part 3: Equipment for Machining of Mechanical Loss in Metal - delivery of equipment

Part 4 of the order: Equipment of the Mechanical Machining Works in Metal - delivery of welding equipment

Part 5: Equipment for Machining of Mechanical Loss in Metal - delivery of hand tools

Part 6: Metrological laboratory equipment - delivery of equipment

Part 7: Other equipment

Project co-financed under Priority Axis 2: Human Resources; Action 2.4: Development of vocational education and training; Sub-measure 2.4.2: Development of vocational education and training - projects of the

ROP of the Warmian-Masurian Voivodship for the years 2014-2020 co-financed by the ESF.

Workshop equipment

Powiat Opatowski | Published October 24, 2017  -  Deadline November 30, 2017
cpvs
43800000, 16000000, 42600000, 37400000, 30200000

1. The subject of the order is the equipment of the School Complex No. 1 and School Complex No. 2 in Opatow and the Complex of Schools. Maria Skłodowska-Curie in Ozarow

The subject of the order has been divided into 8 tasks listed below:

Task No. 1 Agricultural Equipment School Complex No. 1

Task No. 2 Machining Machines School Complex No. 1

Task No. 3 Car Diagnosis School Complex No. 1

Task No. 4 Tools and Instruments School Complex No. 1

Task No. 5 Sports facilities School Complex No. 1

Task No. 6 Mechanical Equipment School Complex. Maria Skłodowska Curie in Ożarów

Task No. 7 Welding Equipment Maria Skłodowska Curie in Ożarów

Task No. 8 IT equipment. Maria Skłodowska Curie in Ożarów

The subject of the order is described in detail in Annex No. 7.1.7.2.7.4.7.4.7.5.7.6.7.7.7.8 to SIWZ.

Agricultural Equipment School Complex No. 1

The subject of the order is described in detail in Annex 7.1.

Machining units School Complex No. 1

The subject of the order is described in detail in Annex 7.2.

Car diagnostics School Complex No. 1

The subject of the order is described in detail in Annex 7.3.

Tools and Instruments School Complex No. 1

The subject of the order is described in detail in Annex 7.4.

Sports facilities School Complex No. 1

The subject of the order is described in detail in Annex 7.5.

Mechanical School Complex im. Maria Skłodowska Curie in Ożarów

The subject of the order is described in detail in Annex 7.6.

Welding Equipment Maria Skłodowska Curie in Ożarów

The subject of the order is described in detail in Annex 7.7.

Computer Facilities Maria Skłodowska Curie in Ożarów

The subject of the order is described in detail in Annex 7.7.

Welding equipment

Zespół Szkół Mechanicznych nr 2 im. Tytusa Maksymiliana Hubera | Published October 24, 2017  -  Deadline November 30, 2017
cpvs
42662000

The subject of the order is the delivery, assembly and commissioning of new (year of production not older than 2017) welding equipment and accessories for the needs of vocational training in the School of Mechanical Engineering No. 2 in Bydgoszcz located at ul. Słoneczna 19 - within the scope and under terms and conditions specified in the Terms of Reference, including the "Description of the subject matter of the order" - Annexes 1 to SIW and the contract template.

The subject of the order includes:

1) delivery and assembly of the equipment in the place indicated by the Ordering Party,

2) conduct training in the field of operation, use and maintenance,

3) providing instruction manuals for particular elements in Polish,

4) preparation and delivery to the Contracting Authority of documents proving the proper performance of the subject matter of the contract (eg, certificates, operating instructions and maintenance instructions) in Polish.

The subject of the order is the delivery, assembly and commissioning of new (year of production not older than 2017) welding equipment and accessories for the needs of vocational training in the School of Mechanical Engineering No. 2 in Bydgoszcz located at ul. Słoneczna 19 - within the scope and under terms and conditions set out in SIWZ with annexes, including in the "Description of the subject of the order" - Annexes 1 to SIWZ and the model contract.

The subject of the order includes:

1) delivery and assembly of the equipment in the place indicated by the Ordering Party,

2) conduct training in the field of operation, use and maintenance,

3) providing instruction manuals for particular elements in Polish,

4) preparation and delivery to the Contracting Authority of documents proving the proper performance of the subject matter of the contract (eg, certificates, operating instructions and maintenance instructions) in Polish.

VB, Verbundvergabe Superstructure, fuse and trolley work Str 6410 Biederitz - Trebnitz

Deutsche Bahn AG FEI - Beschaffung Infrastruktur | Published October 2, 2017  -  Deadline November 27, 2017
cpvs
45234100, 45234116

2 Welding equipment for construction work Str 6410 Biederitz - Trebnitz Lot 1: Königsborn + Biederitz - Track renewal with ballast cleaning track 1 + 2 and point renewal W 1 + 2 + 5 + 55 - 59 Königsborn - Turnout renewal W 21 + 24 + 25-30 + Wv W26 / 29 Bf. Biederitz Lot 2: Gommern + freight freight - track renewal with ballast cleaning, km 13,512 - 25,373 + direction Km 23,900 - 13,555 - glacial renewal track 1 + turnout renewal W 37 + 46 + 47; Dismantling / gap closure W 36 Bf. Gommern - maintenance of railway trenches, TE - dismantling of personnel tunnel Km 26,9 BF