Public tenders for welding-equipment

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!
Electricalwelding equipment

ELECTRIC ARC WELDING EQUIPMENT

Ordnance Factory Board | Published January 10, 2017  -  Deadline February 3, 2017
cpvs

All Documents of this Single Bid TE are attached herewith

99--Machine/Welding Equipment

Department of the Army, National Guard Bureau | Published September 4, 2015  -  Deadline September 8, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is W91ZRS-15-Q-A004 and is issued as a Request for Quotes (RFQ). The proposed contract is 100% set aside for small business concerns. NAICS code is 423830, with size standard of 100. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83. The Connecticut Army National Guard, has a requirement for the following Brand Name or Equal commercial items: - IRONWORKER, MFR: BAILEIGH, MFR PART#: SW-503, QTY: 1 - POWER HACKSAW, QTY: 1 - MILLING MACHINE, MFR: BAILEIGH, MFR PART#: VM-949-1, QTY: 1 Salient Characteristics Iron Worker: round bar shear: 1.125'', rectangle notcher W x D x T 2'' x 3.5'' x .281'', seven set of punches, oversized working tables, quick change punch system, wastebaskets, swing away material stripper, back gauge Power hacksaw: Total weight 374 lbs. 170 kg 396 lbs. 180 kg o Power characteristics: Total power 1.45 HP 1.1 kW 1.72 HP 1.3 kW o Saw motor, power 1.06 HP 0.8 kW 1.32 HP 1.0 kW o Average cutting speed 52.48/104.96 ft./min 16/32 m/min 52.48/104.96 ft/min 16/32 m/min o Stroke speed (Strokes/minute) 203.36/410 ft/min 62/125 m/min 203.36/410 ft/min 62/125 m/min o Dimension of saw blade: 15.75 x 1.18 x 0.06 in. 400 x 30 x 1.5 mm 17.72 x 1.57 x 0.08 in. 450 x 40 x 2.0 mm o Electrical equipment: Supply voltage 220/440 Volts, 60 Hz, 3 phase o Control voltage 24 V DC o Other voltages upon request at additional cost. o Safety requirements: valid safety requirements according to DIN EN ISO 12100-1, DIN EN ISO 12100-2 Milling Machine: adjustable speed from 0 to 4200 rpm, adjustable spindle speeds, thermal friction drilling, 220 volt single and three phase, air draw bar, coolant system with catch tray, square slide ways and X and Y axis ball screws. All interested, responsive, and responsible contractors are encouraged to submit proposals by submitting a response via e-mail to Fabiola Arango, Contract Specialist at Fabiola.arango.mil@mail.mil no later than 1300hrs EST, MON 8 SEPTEMBER, 2015. Responses should include the company name, address, contact name and title, phone number, e-mail address, business size and classification/certification under one of the NAICS Codes listed above, Commercial And Government Entity (CAGE) Code, Dun & Bradstreet (D-U-N-S) Number The acquisition will be FOB Destination with Delivery and Acceptance point at the 06096. Delivery date shall be within 30 days of receipt of order. Descriptive literature is required with your offer. Descriptive literature must be of the type and detail sufficient to allow for a determination of compliance with the solicitation, evaluation of equality with the specified product, the terms of any expressed warranty, price and delivery times. Award will be made to the lowest price technically acceptable offeror. 52.211-6 - Brand Name or Equal, 52.212-1 -Instructions to Offerors-Commercial Items, 52.212-2 - Evaluation-Commercial Items, 52.212-3 ALT I - Offeror Representations and Certifications - Commercial Items, 52.212-4 - Contract Terms and Conditions - Commercial Items, 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items, 52.219-6 - Notice of Small Business Set-Aside, 52.219-28 - Post-Award Small Business Program Rerepresentation, 52.222-21 - Prohibition of Segregated Facilities, 52.222-26 Equal Opportunity, 52.222-22 Previous Contract and Compliance Reports, 52.222-50 Combating Trafficking in Persons, 52.225-13 Restrictions on Certain Foreign Purchases, 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration, 52.233-3 Protest After Award, 52.233-4 Applicable Law for Breach of Contract Claim, 52.252-2 Clauses Incorporated by Reference, 252.204-7004 Alternate A, 252.211-7003 Item Identification and Valuation, 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items, 252.225-7000 Buy American Act-Balance of Payments Program Certificate, 252.225-7001 Buy American Act and Balance of Payments Program, 252.232-7003 Electronic Submission of Payment Requests, 252.232-7010 Levies on Contract Payments, 252.247-7023 Transportation of Supplies by Sea - Alternate III, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation with Authorities and Remedies, 52.222-36 Affirmative Action for Workers with Disabilities, 252.225-7035 Buy American Act-Free Trade Agreements-Balance of Payments Program Certificate, 252.225-7036 Buy American Act-Free Trade Agreements-Balance of Payments Program. The provisions and clauses for this synopsis/solicitation can be found at http://farsite.hill.af.mil. Central Contractor Registration (CCR) can be found at http://www.bpn.gov/. Oral communication is not acceptable in response to this solicitation. Offers must be submitted to the USPFO for Connecticut, Purchasing and Contracting Division, ATTN: Diana Marini, 360 Broad Street Hartford, Connecticut 06105-3706 or via fax (860)524-4874 or e-mail diana.marini@us.army.mil, Not Later Than 2:00 PM, Monday, September 22, 2008.

Supply of Welding equipment

Directorate General of Employment and Training | Published July 16, 2014
cpvs

MIG.MAG welding machine

34--TIG Welding Equipment

Department of the Army, FedBid | Published November 29, 2017  -  Deadline December 15, 2017
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is Eustis558CCW001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-96. The associated North American Industrial Classification System (NAICS) code for this procurement is 332999 with a small business size standard of 750.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-12-15 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Eustis, VA 23604The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Lincoln Electric part # KP2029-4B1 3/32 Collet for 9 and 20 series torches., 20, EA;LI 002: Lincoln Electric part # KP2013-4B1 3/32 Collet for 17 and 26 series torches., 20, EA;LI 003: Lincoln Electric part # KP2033-4B1 3/32 Gas Lens Collect Body for 9 and 20 series torches., 10, EA;LI 004: Lincoln Electric part # KP2034-4B1 3/32 Gas Lens Collet Body for 17 and 26 series torches., 10, EA;LI 005: Lincoln Electric part # KP2019-1B1 Alumina gas lens nozzle 1/4 orifice, 5, EA;LI 006: Lincoln Electric part # KP2019-2B1 Alumina gas lens nozzle 5/16 orifice, 10, EA;LI 007: Lincoln Electric part # KP2019-3B1 Alumina gas lens nozzle 3/8 orifice, 10, EA;LI 008: Lincoln Electric part # KP2019-4B1 Alumina gas lens nozzle 7/16 orifice, 10, EA;LI 009: Lincoln Electric part # KP2018-5B1 Alumina gas lens nozzle 1/4 orifice, 5, EA;LI 010: Lincoln Electric part # KP2018-4B1 Alumina gas lens nozzle 5/16 orifice, 5, EA;LI 011: Lincoln Electric part # KP2018-3B1 Alumina gas lens nozzle 3/8 orifice, 10, EA;LI 012: Lincoln Electric part # KP2018-2B1 Alumina gas lens nozzle 7/16 orifice, 10, EA;LI 013: Lincoln Electric part # KP2018-1B1 Alumina gas lens nozzle 1/2 orifice, 10, EA;LI 014: Lincoln Electric part # KP2018-6B1 Alumina gas lens nozzle 11/16 orifice, 5, EA;LI 015: Lincoln Electric part # K2412-1 Tig torch cable 15 ft. extension, 5, EA;LI 016: Packages of 10, 3/32" 2% Ceriated Grey Tungsten electrodes, 5, PG;LI 017: CK Worldwide linear amperage control, 15 FT. part # AMTCV-10-1-L6, 5, EA;Solicitation and Buy Attachments***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing” basis.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

Welding equipment (42662000-4) Welding equipment

Публічне акціонерне товариство "Укртранснафта" | Published December 4, 2016  -  Deadline January 20, 2004
cpvs
31570412

Service, Calibration & Health Check of Welding Equipment

Air Corps Contracts Section | Published June 6, 2013  -  Deadline June 20, 2013
cpvs
50530000-9, 50532000-3

Maintenance and Support Contract for irish Air Corps Welding Equipment.

35--Welding Equipment

Department of the Army, U.S. Army Corps of Engineers | Published June 26, 2014  -  Deadline June 24, 2014
cpvs

The requested welders must be compatible with the existing Miller welding equipment that is on-site, Miller 12RC Suitcase and Miller S-22-P12 suitcase. The welders shall be new, not used or refurbished. quote mark Brand Name or Approved Equal quote mark

34--Welding equipment VRTEX 360 Software Upgrade

Department of the Army, FedBid | Published June 9, 2015  -  Deadline June 15, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is PR0010669247 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-82. The associated North American Industrial Classification System (NAICS) code for this procurement is 333992 with a small business size standard of 500.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-06-15 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Ft. Stewart, GA 31314 The National Guard - Georgia requires the following items, Brand Name or Equal, to the following: LI 001: Please refer to the PWS for requirements. This is for software upgrades to welding equipment. THE CUSTOMER WILL NEED TWO OF THESE SOFTWARE UPDATES. Customer is completing updates based on priority of system and funding available., 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Georgia intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Georgia is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

34--Welding equipment VRTEX 360 Software Upgrade

Department of the Army, FedBid | Published April 30, 2015  -  Deadline May 6, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is Pr0010669244 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-81. The associated North American Industrial Classification System (NAICS) code for this procurement is 333992 with a small business size standard of 500.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-05-06 13:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Ft. Stewart, GA 31314 The National Guard - Georgia requires the following items, Brand Name or Equal, to the following: LI 001: Please refer to the PWS for requirements. This is for software upgrades to welding equipment, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Georgia intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Georgia is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

welding equipment

Handwerkskammer Koblenz | Published December 22, 2016  -  Deadline February 3, 2017
cpvs
42660000

welding equipment

Welding equipment

Bodex Sp. z o.o. Sp. komandytowa | Published August 10, 2016  -  Deadline September 18, 2016
cpvs

welding equipment

Welding equipment

Rawi Met Sp. z o.o | Published August 9, 2016  -  Deadline September 16, 2016
cpvs
42662000, 42611000

welding equipment

Welding equipment

Rawi Met Sp. z o.o | Published August 6, 2016  -  Deadline September 12, 2016
cpvs
42662000, 42611000

welding equipment

Welding equipment

Tatravagónka a.s. | Published June 7, 2013  -  Deadline June 17, 2013
cpvs
42662000

Welding equipment

welding equipment

Kovo Staněk, s.r.o. | Published April 27, 2016
cpvs

15x welding equipment

Welding equipment

Tallinna Tehnikaülikool | Published March 12, 2015
Winner
RKR Seadmed OÜ
cpvs
42662000

Welding equipment purchases.

Welding equipment

Région Nord-Pas-de-Calais-Picardie | Published July 19, 2016  -  Deadline September 5, 2016
cpvs

welding equipment

34 -- Welding Equipment and Trailer

Department of the Air Force, Air Force Materiel Command | Published February 20, 2008  -  Deadline March 10, 2008
cpvs

This is a synopsis/solicitation. This will be the only public announcement requesting quotes for this individual requirement. Hill AFB has a requirement for various welding equipment and a trailer. Please review the solicitation and return all quotes by the due date.

Welding equipment

CEA Grenoble | Published September 29, 2016
Winner
ERI SAS
cpvs
42662000

laser welding equipment.

34--Miller Welding Equipment

Department of the Army, Army Contracting Command | Published September 26, 2012  -  Deadline September 27, 2012
cpvs

This specification establishes a requirement for Miller Welding equipment and Accessories at Anniston Army Depot, Anniston, Alabama. This requirement is sole sourced to the manufacturer. Only Miller welding machines per the Statement of Work will be accepted. Distributors of Miller Welding Equipment may provide a quote at the specified date on the Soliciation when issued. North American Industry Classification System is 333992. Size standard is 500 employees. This solicitation will be issued electronically in accordance with FAR 4.501, 5.102(a)(7) and 14.205-1(c), therefore hardcopies will not be provided. Vendors wishing an electronic copy may download it by accessing the following address via the internet: https://acquisition.army.mil. Estimated issued date is 27 SEP 12. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidders mailing list. Failure to obtain any said amendments and to respond to them prior to the date and time set for bid opening/receipt of proposals may render r bid or proposal nonresponsive and result in the rejections of same.