Public tenders for welding-equipment

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!
Electricalwelding equipment

34--WELDING EQUIPMENT

Department of the Army, U.S. Army Corps of Engineers | Published April 2, 2015  -  Deadline April 20, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The U.S. Army Corps of Engineers has various requirements for Welding Equipment. Supplies will be delivered to USACE Ensley Engineer Yard, 2915 Riverport Road, Memphis, Tennessee 38109. Supplies will be provided in accordance with the attached solicitation. The solicitation number is W912EQ-15-T-0017 and is being issued as a Request for Quote (RFQ). Multiple awards may be made from this solicitation. Offerors are not required to submit pricing for each line item to be considered for award. This project will be advertised as an UNRESTRICTED procurement. The supplies to be procured in this solicitation are classified under NAICS code is 333992. A copy of this solicitation may be downloaded from the Army Single Face Industry (ASFI) Acquisition Business Web Site at https://acquisition.army.mil/asfi/ on or about April 2, 2015. Response to this solicitation must be received via email, fax, mail, or delivered by date and time indicated on solicitation. Regardless of method of delivery, it is the offeror's responsibility to ensure receipt of quote by the time and date stated therein. Quotes should be marked with solicitation number W912EQ-15-T-0017 addressed to USACE Memphis District, Contracting Division, ATTN: Judy Stallion, 167 N. Main St., Room 665, Memphis, Tennessee, 38103; Phone (901) 544-0776. In accordance with FAR 52.204-7, all vendors shall be registered in SAM prior to bid. Offeror's must be registered with the System for Award Management (SAM), including the NAICS code they are bidding under, in order to receive a Government contract award. To register, the SAM Internet address is: http://www.sam.gov. North American Industry Classification System (NAICS) Code applicable (333992 listed above) to this acquisition must be in vendor's SAM registration.

34--WELDING EQUIPMENT

Department of the Army, U.S. Army Corps of Engineers | Published April 2, 2015  -  Deadline April 20, 2015
cpvs

The U.S. Army Corps of Engineers has various requirements for Welding Equipment. Supplies will be delivered to USACE Ensley Engineer Yard, 2915 Riverport Road, Memphis, Tennessee 38109. Supplies will be provided in accordance with the attached solicitation. The solicitation number is W912EQ-15-T-0017 and is being issued as a Request for Quote (RFQ). Multiple awards may be made from this solicitation. Offerors are not required to submit pricing for each line item to be considered for award. This project will be advertised as an UNRESTRICTED procurement. The supplies to be procured in this solicitation are classified under NAICS code is 333992. A copy of this solicitation may be downloaded from the Army Single Face Industry (ASFI) Acquisition Business Web Site at https://acquisition.army.mil/asfi/ on or about April 2, 2015. Response to this solicitation must be received via email, fax, mail, or delivered by date and time indicated on solicitation. Regardless of method of delivery, it is the offeror's responsibility to ensure receipt of quote by the time and date stated therein. Quotes should be marked with solicitation number W912EQ-15-T-0017 addressed to USACE Memphis District, Contracting Division, ATTN: Judy Stallion, 167 N. Main St., Room 665, Memphis, Tennessee, 38103; Phone (901) 544-0776. In accordance with FAR 52.204-7, all vendors shall be registered in SAM prior to bid. Offeror's must be registered with the System for Award Management (SAM), including the NAICS code they are bidding under, in order to receive a Government contract award. To register, the SAM Internet address is: http://www.sam.gov. North American Industry Classification System (NAICS) Code applicable (333992 listed above) to this acquisition must be in vendor's SAM registration.

116/EML/TC/13 Welding Equipment 3 Lots.

University of Sheffield | Published October 8, 2013
Winner
ITW Welding Products Ltd77 New Court WayOrmskirk, Lancs L30 2YT spl@itw-welding.com
cpvs
42662000, 44315100, 42662100, 42662200

116/EML/TC/13 Welding Equipment x 3 Lots. Lot 1: Gas Metal Arc Welding Equipment. Lot 2: Gas Tungsten Arc and Shielded Metal Arc Welding Equipment. Lot 3: Gas Tungsten Arc And Shielded Metal Arc Welding Equipment. The University of Sheffield, Advanced Manufacturing Research Centre, invites tenders for supply to its Training Centre, Catcliffe, Rotherham. The equipment is required for use in the training area and will predominately be used for training purposes during which they will produce parts that will support and complement the delivery of the apprenticeship framework.

Design and Production of two sets of Welding Equipment including delivery to IAEA Seibersdorf, installation and training as per attachments

International Atomic Energy Agency | Published December 5, 2016
cpvs

Design and Production of two sets of Welding Equipment including delivery to IAEA

Seibersdorf, installation and training as per attachments.

RFQ for supply of welding equipment

United Nations Development Programme | Published January 23, 2015  -  Deadline February 13, 2015
cpvs

Dear Sir / Madam: We kindly request you to submit your quotation for the supply and delivery of oxygen-propane-butane welding equipment as detailed in Annex 1 of this RFQ.  When preparing your quotation, please be guided by the forms attached hereto as Annex 1, 2, 3. Quotations may be submitted on or before 13 February, 2015, 17.00 local (Minsk) time and via e-mail, courier mail or facsimile to the address below: United Nations Development Programme 220050, Republic of Belarus, Minsk, Kirov str., 17, 6th floor Receptionist +375 (17) 226 03 40 (fax), tenders.by@undp.org Quotations submitted by email must be limited to a maximum of 7MB, virus-free and no more than 5 email transmissions. They must be free from any form of virus or corrupted contents, or the quotations shall be rejected. It shall remain your responsibility to ensure that your quotation will reach the address above on or before the deadline (contact phone: +375 (17) 327 48 76). Quotations that are received by UNDP after the deadline indicated above, for whatever reason, shall not be considered for evaluation.  If you are submitting your quotation by email, kindly ensure that they are signed and in the .pdf format, and free from any virus or corrupted files.

116/EML/TC/13 Welding Equipment 3 Lots.

University of Sheffield | Published July 16, 2013  -  Deadline August 23, 2013
cpvs
42662000, 44315100, 42662100, 42662200

116/EML/TC/13 Welding Equipment x 3 Lots. Lot 1: Gas Metal Arc Welding Equipment. Lot 2: Gas Tungsten Arc and Shielded Metal Arc Welding Equipment. Lot 3: Gas Tungsten Arc And Shielded Metal Arc Welding Equipment. The University of Sheffield, Advanced Manufacturing Research Centre, invites tenders for supply to its Training Centre, Catcliffe, Rotherham. The equipment is required for use in the training area and will predominately be used for training purposes during which they will produce parts that will support and complement the delivery of the apprenticeship framework. This is an open EU procurement procedure. The ITT can be downloaded by registering and expressing your interest on the University"s e tendering system https://in-tendhost.co.uk/Sheffield Completed tenders must be returned through the same e-tendering system. The closing date for return of tenders is 12:00 noon on 23.8.2013 (UK time).

Welding equipment

Klaipėdos universitetas | Published February 27, 2013
cpvs
42662000

Welding equipment

Welding equipment

Uniwersytet Rzeszowski | Published May 3, 2013  -  Deadline May 15, 2013
cpvs
42300000, 42662000

Welding equipment

Welding equipment

Slovenská technická univerzita v Bratislave – Rektorát | Published April 30, 2013  -  Deadline May 28, 2013
cpvs
42662000, 45000000, 51500000

Welding equipment

Welding equipment

Tatravagónka a.s. | Published May 7, 2013  -  Deadline June 17, 2013
cpvs
42662000

Welding equipment

Welding equipment

Conseil général de la Savoie | Published September 25, 2012  -  Deadline April 19, 2012
cpvs
42662000

Welding equipment

welding equipment

Conseil général de la Savoie | Published September 25, 2012  -  Deadline April 19, 2012
cpvs
42662000

welding equipment

welding equipment

Klaipėdos universitetas (211951150) | Published June 5, 2012  -  Deadline September 15, 2011
cpvs
42662000

welding equipment

welding equipment

Klaipėdos universitetas (211951150) | Published March 14, 2012  -  Deadline May 19, 2011
cpvs
42662000

welding equipment

Welding equipment

University of Sheffield | Published April 6, 2012  -  Deadline November 7, 2011
cpvs
42660000, 42662000, 42662100

Welding equipment

welding equipment

University of Sheffield | Published April 6, 2012  -  Deadline November 7, 2011
cpvs
42660000, 42662000, 42662100

welding equipment

welding equipment

Ecole nationale d'ingénieurs de Tarbes | Published January 20, 2012  -  Deadline January 3, 2012
cpvs
42662000

welding equipment

Welding equipment

Ecole nationale d'ingénieurs de Tarbes | Published January 20, 2012  -  Deadline January 3, 2012
cpvs
42662000

Welding equipment

Welding equipment

Klaipėdos universitetas (211951150) | Published March 14, 2012  -  Deadline May 19, 2011
cpvs
42662000

Welding equipment

Welding equipment

Iarnród Éireann-Irish Rail | Published February 16, 2017
Winner
Société Des Anciens Etablissements L.Geismar
cpvs
42662000, 34940000, 34941000

The award of a contract for the design, supply, delivery, installation and commissioning of a Flash Butt Rail Welding Machine.

Award of Contract for the Supply, Installation and Commissioning of a Flash Butt Rail Welding Machine.