Public tenders for welding-equipment in Hungary

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!

Maintenance and repair 03 / OVSZ / 2016 sterile tube welding equipment information award

Országos Vérellátó Szolgálat | Published September 26, 2016
cpvs
50420000

Maintenance and repair 03 / OVSZ / 2016 sterile tube welding equipment information award

Call for maintenance and repair of 03 / OVSZ / 2016 sterile tube welding equipment tender

Országos Vérellátó Szolgálat | Published May 2, 2016  -  Deadline June 3, 2016
cpvs
50420000

Call for maintenance and repair of 03 / OVSZ / 2016 sterile tube welding equipment tender

Results of the procedure in the "Welding Machine maintenance, review / 2015th" Law aspects of the procedure

Magyar Közút Nonprofit Zrt. | Published February 12, 2016
cpvs
50000000

Entrepreneurial contract.
Subject: Periodic inspection and repair, maintenance, spare parts supply welding equipment required by law.

The development of a prototype of public procurement procedures Charger

Polaris-Nord Kft | Published May 22, 2015
Winner
NOVATIS Vis Kft
cpvs
31000000

KAYSER 10 CO2 welding equipment 1 electric forklift Still RX 20-20 P 1 840 pieces of steel material iron welding materials 1,400 pieces of plastic and resin composite battery quick-600 Closed storage battery and a standard 10 filling heads for electric cars

Medical equipments

Állami Egészségügyi Ellátó Központ | Published November 11, 2017  -  Deadline December 21, 2017
cpvs
33100000, 31524110, 33192230, 33161000, 45350000, 45317000, 33191100, 33191110

Procurement of surgical equipment and sterilization equipment (2 parts) for the project "Development and Infrastructure Development of the Cardiology and Cardiac Surgery Center at the Zala County Hospital" (SIOP-2.2.4-09 / 1-2010-0015).

Part 1: Heating equipment.

Part 2: Sterilization equipment.

Procurement of surgical equipment and sterilization equipment (2 parts) for the project "Development and Infrastructure Development of Cardiology and Cardiac Surgery at the Zala County Hospital":

Part 1: Equipping equipment

2 electrically operated operating tables

8 LED lighting lamps

2 cell phone lamps 45,000 lux

1 pillar lamp with medical plug, socket

2 ceiling test lamps

15 mobile test lamps 25 000 lux

3 pieces of perfusor anesthesia

2 high-frequency cutter coagulators

1 x C arc image enhancer

Part 2Sterilization Equipment

3 steam sterilizing autoclaves 8 STE

1 steam, steam formaldehyde sterilizer, 4 STE

1 set of sterilizing, transport containers

1 UH cleaner

12 DIN 1/1 capacity

1 dishwasher 8 DIN 1/1 capacity

2 foil welding equipment (wrapping, date stamping)

1 foil roll holder with built-in cutter

2 wash-over-gun pistols

3 pieces of stainless steel rolling sterile container.

Procurement of surgical equipment and sterilization equipment (2 parts) for the project "Development and Infrastructure Development of Cardiology and Cardiac Surgery at the Zala County Hospital":

Part 2Sterilization Equipment

3 steam sterilizing autoclaves 8 STE

1 steam, steam formaldehyde sterilizer, 4 STE

1 set of sterilizing, transport containers

1 UH cleaner

12 DIN 1/1 capacity

1 dishwasher 8 DIN 1/1 capacity

2 foil welding equipment (wrapping, date stamping)

1 foil roll holder with built-in cutter

2 wash-over-gun pistols

3 pieces of stainless steel rolling sterile container.

39 / OVSZ / 2015th Obtaining public procurement procedure for the conclusion of a contract of sale in respect of the various devices SIOP 2.2.3 / 11 / 1-2012-0001. Indicative program within the framework of code amendments to the contract Frank Diagnostics Lt

Országos Vérellátó Szolgálat | Published November 27, 2015
Winner
Frank Diagnosztika Kft.
cpvs
33100000, 42662000, 50421000

Obtaining public procurement procedure for the conclusion of a contract of sale in respect of the various devices SIOP 2.2.3 / 11 / 1-2012-0001. within the framework of code program, which includes delivery, installation, user accordance Manual contained installation, the operator instruction and the 24-month warranty, service in the event of enforcement of kellékszavatossági claims under the warranty period (hereinafter referred to as detailed in the tender documents: service / repair service ). Part 6: Requirements for pipe welding equipment offered mobile professional requirements: - be capable of at least 2.9 mm up to 3.1 mm internal diameter and welding of at least 3.9 mm up to 4.5 mm external diameter PVC pipe sections; - To form the weld seam "hook and line" separating the pipe sections easier; - Carry out at least 10 welds per minute; - Indicate the completion of the welding light signal; - The welding head is easily cleaned and disinfected by the user; - Continuous (lasting at least 3 hours) must be suitable for operation on battery power, at least 800 welds can do so after a charging whereby; - Network (. Ac single-phase 230V, 50 Hz) to be charged; - Have rigid, box conveyor system to the device overall.

"Purchase Contract No. DDOP-3.1.3 / G-14-2014-0009" Dental care development fund "for transporting dental instruments project" Somogyvár - information

Somogyvár Község Önkormányzata | Published November 25, 2015
Winner
H-Proficon Kft.
cpvs
33130000, 33131500

Procurement subject: Supplies "Purchase Contract No. DDOP-3.1.3 / G-14-2014-0009" Dental care development fund "for transporting dental instruments project" Somogyvár Amount: Name Quantity 1 dental surgical lights kézidarabsor 1 2 3 3 1 4 compressor will pull Set 24 5-meter-long car 1 6 hygiene appliance 1 7 rolling trolley 1 8 wall-arm X-1 9 sensor holder who is one of 10 X-ray apron 1 11 X-ray chair one of 12 digital X-ray sensor 1 13 autoclave 1 14 gyorssterilizáló equipment 1 15 Ultrasonic Cleaner 1 16 handpiece cleaning device 1 17 sterilization container 1 18 water distillation unit 1 19 foil welding equipment 1 20 deep-drawing machine is one of 21 prints blender 1 22 sonic composite fillings system is one of 23 electronic apex locator 1 24 intraoral camera is one of 25 machine root canal designs The one 26 machine Scaler 1 27 handheld instrument sharpening machine 1 28 Sand blasting device 1 29 machine polymerization lamp 1 30 Electrosurgical 1 31 awake sedation device 1 32 diódalazer determining device 1 33 caries-and-place device one 34 tooth shades 1 35 ózongenerátoros cleaning device is one of 36 medical magnifying glasses and head lamp 1 37 dental chairs 1 Technical description Documentation included

Within the framework of a contract for demolition work Pécs, 25-story high house - result

Pécs Megyei Jogú Város Önkormányzata | Published September 4, 2015
Winner
STRABAG-MML Kft. és Land-Bau Kft.
cpvs
45111100, 45111212, 90512000, 45112700, 77314100

Procurement subject: Demolition work within the framework of a contract to Pécs, 25-storey high volumes Main House: Background: The High House was built in 1975. Before Christmas 1989, it revealed that intersection next to a pillar, traces of corrosion were found, it was decided on the basis of a 252-apartment building evacuation. Evacuated to 21, have since deserted. The IMS structure building built 125 pieces total floor space of 365,000 m2. The High Church of which 18,500 m2. Expert (s) for Pecs 25-storey residential house finding that "the classification of the building life-threatening" On the basis of expert opinions recorded in the County Government Office of Pécs District Office, District of Construction and Heritage Protection Office has issued a decision which orders the High Church breakdown. (22 October 2013) The purpose of this procurement procedure: 53 Number of Pécs and the 1/14-inch parcel of land No. tranches of 25-storey residential building and demolition arise in this context the implementation of all labor export. The main technical parameters: The extent of the breakdown: load-bearing structure of the so-called High House IMS post-tensioned reinforced concrete frame structure. The High House are doubly reinforced concrete elements currently overloaded tension in a compressed state. Lowered to a depth of 10 m 60 cm in diameter will be Franki piles. The building was -1. level, the lower plane of the pile grid must be dismantled. The IMS structures dismantling the building in reverse order of operations is possible. Tower crane should be set up before starting the demolition work. The ability to build a tower crane itself and should be provided in case of a crane boom radius 40 m with a minimum number must be suitable for 5 t lifting weights. Based on site layout plan prepared by the demolition plan and the contractor shall specify the specific type of necessary tools, and the designer must be presented at the event gained intensity and must be accepted within the framework of technical management planning. The minimum load capacity of 1.5 min pavement management kN / m2 and should be 1.2 m high, such as a closed surface. limit or 10x10 cm canvas made of steel mesh density, knee and foot board with a board should be. With the interface is closed sorolású wood planks. The breakdown is to be carried out continuously from the top downwards to a level at least two-time work is underway. The demolition process of the building from top to bottom, level-by demolishing series. Calculated demolition material quantity in a level of about 770 tons of demolition debris World Cup to be expected. This is equivalent to approximately 770 t / 2.2 t / m3 = 350 m3 has a solid, it is calculated at 1.6 times the factor slack, loose 1.6x350 = 560 m3 / level. Planned itinerary: Movement of planned construction and demolition waste 10 tons for cargo vehicles. Coming from the road Hungaria Artillery Street can be recovered and drive out towards the Megyeri map of the demolition area. The IMS floor deconstruct the three types of cutting tools used: Cutting wheels, diamond cutting and Vidin high pressure water jet cutting edge of the World Cup event of collapse tax return items to any technology it is possible to use cutting torch, gas welding equipment. The feszítőpászmákban and the original wire bundle is assumed to be 20 tons (200K) force, so they elcsípéssel, break open the disc is prohibited. The tension in certain locations to unlock the demolition plan, the tension wires should be explored in the order listed and welding gun must be heated up, it needs to be softened and burned. The slabs disconnect auxiliary lifting devices must be made of these static designer must be consulted.

1 Purchase contract of sale of various machines and various equipment 2.Adásvételi purchase contract.

Hő és Légtechnika Innovációs Kft. | Published December 19, 2013
Winner
Global Transfer s.r.o.Lesna 313Velke Kosihy 94621
cpvs
42000000, 38300000

1 Purchase contract of sale of various machines and equipment - Industrial GT101 combination welding machine: - Power: 3.4 Kw - Welding electrode diameter: 0.6-0.8 mm - Weight: 78 kg - Noise level: 72 dB - Electronic GT201 performance industrial spot welding Equipment: - Voltage: 400V - Power: 4600 A - weight: 82 kg - Noise level: 64 dB - Kiütőkalapácsos bearing puller set - 15-30, 30-80 mm inner and outer diameters of 15-80 mm grip makes possible - Weight: 6 kg - Hydraulic Puller - power 10 t - max. Swing diameter 250 mm - piston stroke 0-50 mm - Weight: 12 kg - errors wireless detection probe video system: - diameter 13 mm camera probe, 1m long camera cable - 4 selectable frequencies to transmit the recorded image as one of the leading USB receiver that laptop or computer connected - Accessories: USB data cable, battery charger, Win XP, Vista and Win a CD containing the executable under 7 operating systems meghahjtó program - measuring no-contact thermometer - you can measure without touching the object surface temperature. They can be used where conventional temperature measurement can not be used, for example. moving or energized for objects. - LCD display with backlight, battery power measurement, automated measurement data backup - for laser beam - Power supply 9 V battery - Sandblasting equipment - prior to and enhance weather resistance coating to clean metal parts. - Operating pressure. 6-10 bar - air consumption: 170 to 700 l / min - compressor refrigeration dryer - painting and surface treatment - Power: 7500 W - air tank capacity: 300 l - max pressure: 10 bar - outgoing air flow: 870 l / min - Weight 650 kg - Power lifting - capacity: 1000 kg - lift: 2500 mm - center of gravity axis: 600 mm - fork width: 560 mm - fork length: 1150 mm - Overall Height: 1750 mm - Overall width: 700 mm - Total length: 1600 mm - Wheel diameter: 80 mm - government wheel diameter: 150 mm - GT320 lathe - current length: 720 mm - spindle bore 38 mm - Speed ​​range: 60 to 1600 rev / min - Size 0.5-4 threads mm - Withwort rounds: 11 to 40 mm - automatic longitudinal feed rate from 0.1 to 1.4 mm / rev - automatkius transverse feed rate from 0.022 to 0.3 mm / rev - document capture unit 160/200 mm / rev - weight 560 kg - GTP011 precision milling machine - variable angle milling head 400 mm stroke - power feed: 0.12, 0.19 and 0.26 mm / rev - Power supply: 3 x 400 V delta Y - power consumption: 850/1 100 W - Speed ​​range : 50-2520 (12) rev / min - angle adjustment: 90 degrees - table size: 730x210 mm - base-size: 510x700 mm - Overall Height: 2,115 mm - Spindle nose: 4 morse taper - Table transverse displacement: 175 mm - table longitudinal feed rate: 455 mm - Spindle travel: 120 mm - spindle overhang: 270 mm - Maximum distance spindle to table: 730 mm - Vernier scale spindle feed of 0.02 mm - EEA 008 Pvc parts (cap) injection - erxtruder capacity: 65 kg / h - power consumption: 36 kW - air pressure: 5-7 bar - Weight: 4400 kg - Magnetic drilling machine: - Power supply: 230 V - Power consumption: 1100 watts - Speed ​​range: 0 to 550 rev / min - chuck opening range: 8-15 mm - plate shears for cutting sheet - front bumper: 0-310 mm - rear bumper: 0-570 mm - carbon steel, hard chrome plated blade surface - Weight: 480 kg - industrial metal band - power 230 V - Power consumption: 360 W - Cutting speed: 19-28-50 m / min - max. cutting diameter: 128 mm - max. cut into 95 mm diameter at 45 degrees - 60 degrees max cutting diameter: 44 mm - Industrial bending - bending angle: 135 degrees. - Maximum sheet size 1020 mm / 2 mm - Weight: 380 kg - Roll bending machines - maximum bend length: 1 m - maximum thickness of 1.5 mm - cylinder diameter: 75 mm - Dimensions: 1800 * 500 * 500 mm - weight 230 kg - Disc Grinding Equipment: - Supply voltage: 230 V/50 Hz - Power consumption: 650 W - belt speed of 5 m / s (150x1 220 mm size) - Speed ​​dial: 1 400/perc (220 mm diameter ) - Weight: 65 kg 2 Various equipment purchase contract purchase - 10 wind speed - wind speed measurement range: 0.4 to 30 m / s or 1.4 to 108 km / h - Beaufort grades 0-12, .004 to 9,999 m2 air flow intensity, temperature 0 - 60 degrees Celsius, resolution of 0.1 / 1 to 50 measurements can be stored in memory - 10 Vibration machine - displacement measurement from 0.001 to 4 mm (0.01 to 10 kHz) - Rate: 0.25 to 20 cm / s - Acceleration: 0.1 to 200 m/s2 - Power supply: 4x1, 5V AAA batteries - dimensions. 124 * 62 * 30mm - PC interface RS 232 C Accuracy + / -5% - Weight: 0.8 kg - Laser hoss
  • 1