Public tenders for electrical in Walla-walla-wa United States

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!

59--Electrical Supplies

Department of the Army, U.S. Army Corps of Engineers | Published March 23, 2015  -  Deadline May 15, 2015
cpvs

The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for electrical supplies for the U.S. Army Corps of Engineers, Walla Walla District, Walla Walla, WA. The proposed acquisition is a total small business set-aside. Offers from other than small business concerns will not be considered. The NAICS code applicable to this acquisition is 335999 with a Small Business Size Standard of 500 employees as determined by 13 CFR 121.104. When available, the solicitation documents for this project W912EF-15-Q-0053 will be provided via FedBizOpps.gov https://www.fbo.gov.on or about March 30, 2015. The solicitation will be a Request for Quote (RFQ). The quote closing due date and time will be detailed in the RFQ and any amendments that may be issued. Please note: W912EF-15-Q-0053 replaces W912EF-15-Q-0027. Offerors that submitted a quote for W912EF-15-Q-0027 are highly encouraged to submit on W912EF-15-Q-0053. Important Note: The FedBizOpps Response Date listed elsewhere in this synopsis is for FedBizOpps archive purposes only. It does not necessarily reflect the actual due date that the RFQ is due. When available, the solicitation documents for this project will be available via FedBizOpps.gov https://www.fbo.gov. NO CD's OR HARD COPIES WILL BE AVAILABLE. Offerors are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to FedBizOpps.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me quote mark to Interested Vendors quote mark button in the listing for this solicitation on FedBizOpps.gov. All quotes received by the closing date that are small businesses will be considered by the Government. To be eligible for contract award, offerors must be registered in the System for Award Management (SAM). Register via the SAM website at https://www.sam.gov or contact SAM Customer Service at 866-606-8220. Offerors must also complete Offeror Representations and Certifications on-line at https://www.sam.gov or complete in solicitation W912EF-15-Q-0053.

Z--Upgrade Electrical Distribution, 5kV to 15kV, Building 100 NRM 663-15-102 CON

Department of Veterans Affairs, Walla Walla VAMC | Published September 6, 2016
cpvs

The VHA Network Contracting Office 20, on behalf of the VAMC, Spokane, WA, has awarded a firm fixed price general construction contract for NRM Project 653-15-102 Upgrade Electrical Distribution 5kV to 15kV, Building 100, VAMC, Seattle, WA. The successful offeror is Helix Electric, Inc. of San Diego, CA.

C--Upgrade Electrical Distribution 5KV to 15KV PSHCS, Seattle Division, WA NRM Project 663-15-102 Design

Department of Veterans Affairs, Walla Walla VAMC | Published July 21, 2015
cpvs

The VHA Network Contracting Office 20, on behalf of the Puget Sound Health Care System, Seattle, Washington, has awarded a firm fixed price architect-engineer contract to design an upgrade of the electrical distribution system from 5kV to 15kV. The successful offeror is a small business firm.

10--LGA-T1 Transformer

Department of the Army, U.S. Army Corps of Engineers | Published June 1, 2015  -  Deadline April 9, 2015
cpvs

Awarded to Electrical Service Products.

Z--Lower Monumental Navigation Lock Downstream Gate Hoist Machinery Upgrades

Department of the Army, U.S. Army Corps of Engineers | Published June 19, 2015  -  Deadline September 17, 2015
cpvs

The work described herein involves the replacement/upgrade of the navigation lock downstream gate hoist mechanical machinery and the associated electrical and control equipment, and the rehabilitation of the gate hoist friction sheaves. Mechanical upgrades consist of the hoist drive components required to operate the gate, the overhead service crane in each machinery room, and the mechanical aspects of limits and controls for gate operation. Furnish and install the following items for the hoist drives in each machinery room: new pinion gears, pinion shafts, pinion bearings, couplings, and brakes. In addition, install new Government-furnished gearboxes. Install new bearings for the friction sheaves in each machinery room. In order to replace the friction sheave bearings, the contractor must have technical experience, labor, and physical plant required for jacking and shoring of the existing 18 foot diameter friction sheaves that weigh approximately 112,000 pounds each. Upon completion of the bearing replacement, the contractor will be responsible for precise alignment of the friction sheave bearings and the alignment of open gear contact between the new pinion gears and the existing friction sheave ring gears. The contractor will be responsible for gate hoist wire rope load balancing that will require the services of a qualified engineer with a minimum of three years experience with load cells and load monitoring equipment to ensure the loads are evenly distributed across all hoist wire ropes at the completion of the work. The overhead service cranes in each machinery room will be replaced with commercially-available five ton rated electric wire rope hoists. New overhead cranes shall be single-girder top running bridge-type furnished with pendant style pushbutton remote control and wall-mounted pushbutton control station. Structural upgrades consist of rehabilitation and weld repair of the downstream gate hoist friction sheaves, fabrication and installation of new machinery supports and pedestals, fabrication and installation of new work platforms, gratings, handrails, guardrails, ladders, and ladder cages, and structural modifications to the existing overhead service crane corbels. All weld repair performed on the gate hoist friction sheaves must conform to American Welding Society (AWS) D1.5 - Bridge Welding Code requirements. Accordingly, contractor welders shall pass the qualification tests prescribed by AWS D1.5 prior to performing work on this contract. Develop welding procedures in accordance with AWS D1.5 and provide the services of AWS D1.5 certified welding inspectors to conduct required non-destructive testing of new and repaired welds on the gate hoist friction sheaves. Structural modifications to the existing overhead service crane corbels consist of the installation of an adhesive anchor system to increase the load capacity of the corbels from 5,000 pounds to 7,000 pounds. Evaluate concrete drilling locations for the presence of existing reinforcing steel with Ground Penetrating Radar or an approved equivalent method. Electrical upgrades consist of replacement of the machinery room motor control centers and power supply wiring and circuit breakers, installation of new variable frequency drive (VFD) equipped motors, new main power disconnects, new power distribution blocks, new VFD's, new control voltage transformers, new dynamic brake resistors, new programmable logic controllers (PLC), new network switches, new fiber optic panels, and new control relays. New PLC installations require the contractor to provide PLC program development, licensed software packages, shop testing, and operator field tests. New VFD installations require specified hardware, programming software, onsite installation supervision by the VFD manufacturer, VFD test plans, and execution of performance verification tests. New control panel, graphic panel, and equipment panel installations require specified hardware to be verified through Government-witnessed shop testing prior to delivery to the work site. A critical element of the project involves complex sequencing and coordination of commissioning and cut-over of new equipment and systems, and highly technical interfaces between new and old systems. The Contractor must demonstrate experience and qualifications necessary to manage challenging Quality Control and Commissioning programs for both factory and on-site testing requirements. The project involves the procurement of complex electrical and control equipment with long lead times. Complete on-site work in close coordination with the Government lock and dam facility, and minimize outages and disruptions to operations. Provide on-site customer operations and maintenance training by authorized representatives of the new equipment manufacturers. Miscellaneous elements of the contract include RCRA 8 metal based paint and asbestos containing material (ACM) removal and disposal from existing equipment. The construction magnitude is estimated between $1,000,000 and $5,000,000. 100% performance and payment bonds will be required. NAICS code for this project is 237990, and the small business size standard is $36,500,000 average annual receipts. Solicitation No. W912EF-15-R-0048 will be posted to the FBO website on or about August 4, 2015. Solicitation is open to small business concerns only. The proposal due date will be contained in the solicitation and any solicitation amendments that may be issued. ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires approximately 4 weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that he/she was legally admitted into the United States and has authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with I-551 stamp or attached INS Form I-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form I-151 or I-551), Temporary Resident Card (INS Form I-688), Employment Authorization Card (INS Form I-688A), Reentry Permit (INS Form I-327), Refugee Travel Document (INS Form I-571), Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B). Send this information by email to jani.c.long@usace.army.mil. Foreign nationals must have received clearance prior to being granted access to the project site. When available, the solicitation documents for this project will be accessible via FedBizOpps.gov https://www.fbo.gov. NO CD's OR HARD COPIES WILL BE AVAILABLE. Offerors are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to FedBizOpps.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me To Interested Vendors quote mark button in the listing for this solicitation on FedBizOpps.gov.

59--Multiple Supplies for BPA

Department of the Army, U.S. Army Corps of Engineers | Published November 21, 2014  -  Deadline January 30, 2015
cpvs

NAICS Code: 423610 Contracting office address: U.S. Army Corps of Engineers, Walla Walla District, 201 North Third Avenue, Walla Walla, WA 99362. Subject: Pre-solicitation notice for Electrical, Plumbing, Hardware, Building Materials, HVAC and Petroleum Supplies Blanket Purchase Agreements (BPA) for the Walla Walla District Office, Walla Walla, Washington. Proposed solicitation number: W912EF-15-Q-0025 Closing response date: approximately 3 weeks from the date the solicitation is issued Point of Contact: Lana Murry, Purchasing Agent, at (509) 527-7217 or e-mail: lana.murry@usace.army.mil Description of Requirement: This synopsis is not a request for quotes or proposals. This is a pre-solicitation notice that a solicitation is scheduled to be released via FedBizOpps (www.fbo.gov) in the near future detailing requirements for six (6) different commodity areas (Electric, Plumbing, HVAC, Hardware, Building Material and Petroleum which will result in awarding three Agreements from each of the six areas, for a total of 18 Agreements; there will be two small business (SB) and 1 large business (LB) selected for award per commodity area (12 agreements to SB and 6 agreements to LB) to support all the Dams and projects in the Walla Walla District. This will be a five year agreement. This announcement is for information and planning purposes only and is not to be construed as a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. Set-aside Status: The solicitation is scheduled to be issued as Unrestricted. The North American Industry Classification System code (NAICS) small business size standard for this requirement is 500 Employees. Conducting Business with the Government: In order for contractors to conduct business with the Department of Defense, the contractor must provide registration information to the System for Award Management Registration (SAM). All Offerors must be SAM registered prior to receiving an award. Registration instructions may be obtained and online registration may be accomplished, at www.sam.gov. By submission of a quote, a vendor acknowledges the requirement to be registered in the SAM database prior to award, during performance, and through final payment of any contract resulting from the solicitation. When available, the solicitation documents for this project will be accessible via FedBizOpps at www.fbo.gov. No CD's or hard copies will be available. Offerors are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document posted at the referenced website.

58--Juvenile Salmon Acoustic Telemetry System (JSATS) Transmitters

Department of the Army, U.S. Army Corps of Engineers | Published October 9, 2014  -  Deadline November 19, 2014
cpvs

The Walla Walla District Corps of Engineers (District) requires the supply of JSATS micro-acoustic transmitters for implantation into adult and juvenile salmonids, kelt steelhead and Pacific lamprey for fish passage and survival studies. Interested parties must have recently (since 2010) produced fifty prototype JSATS micro-acoustic transmitters with 100% passing in a competitive procurement performance evaluation/acceptance test for the U.S. Army Corps of Engineers. An equivalent evaluation by an independent laboratory may be substituted if accompanied by a test results report. Written documentation of the results of these performance evaluations must be submitted to be considered for this requirement. The written documentation of acceptance testing results must include information on dimensional, environmental, electrical, and acoustic factors. These factors, for acceptance testing procedures, will be specified in the solicitation. The District is considering the award of one Indefinite Delivery Indefinite Quantity (IDIQ) Single Award Task Order Contract (SATOC) to accomplish this mission. Solicitation Number W912EF-15-R-0003 will be posted to the Federal Business Opportunities (FBO) website on or about mid to late October. Closing response date will be approximately 4 weeks from the date the solicitation is issued. This project is to be solicited as Unrestricted. The NAICS code for this requirement is 334511 with a size category of 750 employees. This synopsis is not a request for quotes or proposals. This is a pre-solicitation notice that a solicitation has been scheduled to be released via FedBizOps (www.fbo.gov) soon detailing requirements for JSATS micro-acoustic transmitters. This information is for planning purposes only and is not to be construed as a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. Important Note: The FBO response date listed elsewhere in this synopsis is for the FedBizOpps archive purposes only. It has no relationship to the actual solicitation response date. The solicitation response date will be contained in the solicitation and any solicitation amendments that are issued. When issued, the solicitation documents for this project will be available via FedBizOpps.gov or https://www.fbo.gov. NO CD's OR HARD COPIES WILL BE AVAILABLE. Offerors are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document(s) posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to FedBizOpps.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me To Interested Vendors quote mark button in the listing for this solicitation on FedBizOpps.gov.

Z--Lower Granite TeleCommunications System Upgrade

Department of the Army, U.S. Army Corps of Engineers | Published March 19, 2015  -  Deadline April 20, 2015
cpvs

Construction Project: Lower Granite Telecommunications System Upgrade. The work will be performed at Lower Granite Lock and Dam located in Whitman County and Garfield County, Washington. This will be a firm fixed-price construction contract. Construction magnitude is estimated to be between $250,000 and $500,000. Performance and payment bonds in the amount of 100 percent of the contract price are required. A bid bond is required in the amount of 20 percent of the total bid price. This project is open to both large and small business concerns. The North American Industry Classification System (NAICS) code for this work is 238210, Electrical Contractors and Other Wiring Installation Contractors. The small business size standard is $15,000,000 in average annual receipts. Summary of Scope of Work: The purpose of this work is to 1) Install new cable plant (copper plant shall be CAT 6a per Institute of Electrical and Electronics Engineers (IEEE) 802.3an; where additional fiber optic cable is required, fiber plant shall be 50/125 micron multimode); 2) Core drilling with requisite enclosures. Project will include conduit, cable tray/ladder and cable race installations; 3) furnish and install 20KVA un-interrupted power supply (UPS) and associated wiring and devices to support reliable power to the telecommunications system; 4) Provide as-built drawings as specified. Shop drawings shall be created in MicroStation Version V8 or compatible equivalent at Lower Granite Lock and Dam. Solicitation Number W912EF-15-B-0009 will be posted to the Federal Business Opportunities (FBO) website on or about April 20, 2015. The solicitation will be an Invitation for Bid. Bids will be due no sooner than 30 calendar days after actual solicitation issuance date. A site visit will be offered approximately two weeks after the solicitation is made available to bidders. Refer to the solicitation for details regarding the site visit. The bid opening date will be contained in the solicitation and any solicitation amendments that may be issued. Important Note: The FBO response date listed elsewhere in this synopsis is for the FedBizOpps archive purposes only. It has no relationship to the actual bid opening date. The bid opening date will be contained in the solicitation and any solicitation amendments that are issued. When issued, the solicitation documents for this project will be available via FedBizOpps.gov or https://www.fbo.gov. NO CD's OR HARD COPIES WILL BE AVAILABLE. Bidders are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document(s) posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to FedBizOpps.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me To Interested Vendors quote mark button in the listing for this solicitation on FedBizOpps.gov. ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires approximately four (4) weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that they were legally admitted into the United States and have authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with I-551 stamp or attached INS Form I-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form I-151 or I-551), Temporary Resident Card (INS Form I-688), Employment Authorization Card (INS Form I-688A), Reentry Permit (INS Form I-327), Refugee Travel Document (INS Form I-571), Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B). Send this information by email to Kent.R.Bernard@usace.army.mil and jani.c.long@usace.army.mil. Foreign nationals must have received clearance prior to being granted access to the project site.

A-E Multidiscipline Engineering and Design Services

Department of the Army, U.S. Army Corps of Engineers | Published April 12, 2016  -  Deadline May 19, 2016
cpvs

1. CONTRACT INFORMATION: This contract for A-E Multidiscipline Engineering and Design services procured in accordance with PL 92-582 (Brooks A-E Act) and FAR Subpart 36.6. The Walla Walla District intends to award up to three (3) indefinite delivery contract for Architect-Engineer (A-E) Multidiscipline Engineering services not to exceed $9.5 million each for the life of each contract, consisting of a base period of one (1) year and four (4) option periods not to exceed one (1) year each. The North American Industry Classification System (NAICS) code for this procurement is 541330 - Engineering Services and the corresponding small business size standard is $15 million in average annual receipts for the preceding three (3) fiscal years. This announcement is issued on an Unrestricted Basis and is open to all businesses regardless of size. Large businesses must comply with FAR 52.219-9 for a subcontracting plan on any portion of work to be subcontracted. Walla Walla District overall small business goals for 2016 are: (1) 48.68% small business (SB) firms, (2) 11.88% small disadvantaged business (SDB) firms; (3) 7.67% woman owned small business (WOSB) firms; (4) 2.23% service disabled veteran-owned small business (SDVOSB) firms; and (5) 4.67% historically underutilized business zone small business (HUBZone) firms. A subcontracting plan is not required with the initial submittal, but will be required with the contractor's Service/Supply Rate Schedule proposal if the firm is selected for negotiations. The wages and benefits of service employees (FAR 22.10) performing under these contracts must be at least equal to those determined by the Department of Labor under the Service Contract Act. To be eligible for contract award, firms must be registered in the System for Award Management (SAM). Register via the SAM website at https://www.sam.gov or contact SAM Customer Service at 866-606-8220. Firms will be selected for negotiations based on demonstrated competence and qualifications for the required work as further described in this announcement. The contract will consist of providing professional architect-engineer and drafting services to include electrical, mechanical, structural, civil, geotechnical, hydraulic and hydrologic engineering disciplines for preparation of plans and specifications and/or other engineering documents for various civil works projects. Work will vary in scope and size and will be awarded by individually negotiated firm-fixed-price task orders. A firm-fixed-price Service/Supply Rate Schedule encompassing disciplines, materials, and equipment for subsequent task orders will be negotiated following the preliminary selection. 2. PROJECT INFORMATION: The Multidiscipline Engineering services are primarily required for various Walla Walla District and Northwest Division civil works projects located within the States of Washington, Oregon and Idaho. The work to be performed under this contract shall consist of, but not be limited to, furnishing all necessary labor, materials, supplies, and equipment required for professional A-E services as defined in the contract and as specified by individual task orders. The scope of professional services will require experience and technical knowledge to include but not limited to: a. Structural: Perform advanced structural analysis and design, both preliminary and final, for major elements of civil works structures such as non-overflow sections of dams, spillways, intake and outlet structures, navigation lock features, complex fish bypass facilities, tainter gates, retaining walls, piers, bulkheads/gates, floating trash/shear booms, cofferdam cells, barge mooring facilities, bridges, stilling basins, and other features related to flood control facilities. In some instances, perform structural design for small office buildings, warehouses and other structural vertical construction. Apply structural theories relating to dynamics of structures, indeterminate analysis, strength of materials, and advanced computer modeling of complex structures using frame analysis and finite element methods. Utilize appropriate materials, such as steel, wood, aluminum, fiber reinforced plastic, and concrete structures (conventional cast-in-place, precast or prestressed). Prepare plans and specifications, as well as design documentation reports, for structures such as those identified above. b. Mechanical: Engineering, design, and preparation of plans and specifications for cranes, hoists, and other machine design items; HVAC systems; piping, plumbing, and sewage systems, gating (high head and other), operators (motors, gearing and wheels), hydraulic and air systems, water supply and pumps and screening systems related to civil works and fish passage systems. c. Electrical: Engineering, design, and preparation of plans and specifications of low and medium voltage power distribution equipment; motor controls, motor control centers; engine generators, engine generator control systems, transfer switches (automatic and manual), and variable speed drives; arc flash hazard analysis, calculations and labeling; instrumentation, PLC, and SCADA system design (hardware and software); security, telephone and CCTV systems; short circuit calculations, load studies, and device coordination studies using SKM Power Tools for Windows software; and interior and exterior lighting. d. Civil: Engineering, design, and preparation of plans and specifications for roads, pavements, drainage, excavation and disposal, grading, clearing and debris removal, utilities, waste water treatment, on-site water supply and water treatment, marine and campground type recreation facilities, levees, river bank protection, and land surveying. e. Hydraulic and Hydrologic: The analyses and design for high head dam regulating outlet facilities; spillways and stilling basins; outlet valves and gates; existing and new adult and juvenile migrant fish facilities; navigation channels and facilities. Computational fluid dynamic (CFD) modeling including one, two and three dimensional numerical modeling for steady and unsteady flow including temperature and water quality parameters. Capability for data archiving of CFD modeling for later use. Hydraulic physical modeling capability; and prototype testing. Expertise with fisheries design and criteria. The analysis and design of both open channel and pressure conduit flow systems. Capability to perform hydrologic, open channel hydraulics, sedimentation, and water quality studies and collect and analyze water quality samples.f. Geotechnical: Geologic and soils mapping; soils engineering; engineering geology; insitu material testing; on and offshore surface and subsurface soil and rock sampling for lab testing; instrumentation plans and designs for the installation, monitoring, and analysis of a variety of civil works structures including but not limited to embankment dams, concrete dams, powerhouses, marine structures, and foundations in soils and rock; groundwater investigation; material source investigations; slope stability studies; shallow and deep foundation explorations, investigations and designs; excavation and embankment design and slope stability studies; slope protection and retaining structures; underground openings including tunnels in soils and rock; water well investigation and design; seismic analyses; dam and levee safety engineering and investigation to include inspections, risk assessments, potential failure mode analyses, interim risk reduction measures (IRRM), fragility curves, utilization of risk based tools and models to support risk-informed decisions; and geotechnical reports and specification writing. g. Hydropower: Mechanical, Electrical, Civil and Structural engineering, design, and review services, including on-site engineering support, for the replacement, refurbishment, repair, failure analysis or upgrade of hydroelectric powerhouse and pumping plant systems, equipment, and appurtenances. Work may be performed on generators , turbines, power trains, governors, exciters, transformers, circuit breakers, control systems, control and protection relay systems, voltage systems, switchyard switchgear and breakers, motor and control systems, gantry and bridge crane systems, condensing equipment and operations, water control pumping plants, containment structures, powerhouse gates, gating at remote structures, sump pumps, cooling water pumps, potable water pumps, water treatment stations, associated piping and other flow passages, control and SCADA systems, fiber optic and digital communication systems, video security and cathodic protection systems. Capability to perform the procedures for estimating hydropower project energy output and dependable capacity for determining power benefits and performing hydropower economic analyses for various types of power projects, new conventional and pumped-storage projects, hydroelectric and pumping plant expansions, rehabilitation of existing hydroelectric and pumping plant projects, operational changes, and cost allocation studies. Capability of performing Hydroelectric and Pumping Plant Electrical, Mechanical, Structural, and Civil investigations for equipment and facility assessments, initial feasibility cost appraisals, final engineering cost appraisals, reconnaissance studies, fault studies, relay coordination studies, generator uprate studies, power system uprate studies, plans and specifications, and commissioning plan development and execution. h. Construction Cost Engineers/Estimators. Confirming quantities, developing MCACES estimates (latest version and supporting databases), developing construction schedules, and performing risk analysis for civil works projects. i. Value Engineering: Value Engineering (VE) study is a process of applying the Value Engineering Methodology (VEM) using a multi-discipline team of designers, stakeholders and the Project Delivery Team (PDT) to break down the project into functional performance elements, to assign costs and benefits, and to perform an analysis of the functions for the purpose of improving performance, reliability, quality, safety and life cycle costs. Value Engineering studies shall be performed in compliance with ER 11-1-321. The VE study team leader (facilitator) shall be a Certified Value Specialist in accordance with the requirements of SAVE International (previously known as the Society of American Value Engineers (SAVE)). All members of the VE study team shall be independent of the PDT and Independent Technical Review (ITR) teams. j. CAD COMPLIANCE: The selected firm must be able to produce engineering drawings on a computer aided design (CAD) system and provide those drawings to the district in electronic format. All new drawings shall be created in accordance with the current Architectural/Engineering/Construction (A/E/C) Computer-Aided Design (CAD) Standards. The current A/E/C CAD Standards can be found at https://cadbim.usace.army.mil The A-E's CAD system shall be compatible with MicroStation (Bentley Microsystems) design file format version 8 or greater. Ability to prepare complete detailed construction drawings and specifications using Government guide specifications format shall be required. k. SPECSINTACT COMPLIANCE: Specifications shall conform to the format and content requirements of the Walla Walla District. The selected firm must be able to produce technical specifications in SpecsIntact format. The SpecsIntact software can be downloaded from the following web page: http://specsintact.ksc.nasa.gov. Technical specifications shall be produced from Unified Facilities Guide Specifications (UFGS) and the locally prepared guide specifications. UFGS sections can be downloaded from the web at the following site: http://www.wbdg.org/ccb/browse_org.php?o=70. l. GEOGRAPHIC INFORMATION SYSTEMS (GIS) COMPLIANCE: The selected firm must be able to produce GIS data that meets Corps of Engineers mandated Spatial Data Standards for Facilities, Infrastructure and Environment (SDSFIE) or other customer specified standards. SDSFIE specifications and tools can be found at, http://www.sdsfieonline.org. GIS deliverables must be fully compatible with the Walla Walla District's Enterprise GIS (eGIS) Systems which utilize Environmental Systems Research Institute (ESRI) formats. All geospatial data must be documented through the preparation of standard metadata descriptions. The Contractor shall ensure the metadata delivered is compliant with Federal Geographic Data Committee (FGDC) Endorsed and Endorsed External Standards as described at http://www.fgdc.gov/standards/projects/index_htmlMetadata must be compatible with ESRI software. 3. SELECTION CRITERIA: A-E selections will be conducted in strict accordance with the announced selection criteria, and in compliance with FAR Subpart 36.6, its supplements and Engineer Pamphlet 715-1-7. The criteria for evaluation and selection are listed below in descending order of importance. Criteria A through E are primary. Criteria F through H are secondary and used as 'tie-breakers' for technically equal rated firms; therefore firms should not commingle submission of data related to those criterion with the primary criterion. Primary Criteria:A. Specialized experience and technical competence in the type of work discussed in Project Information items 2a through 2l for the preceding five (5) years. B. Professional Qualifications: The selected firm must have the professional qualifications necessary for satisfactory performance of required services and relevant experience in the disciplines and technical areas listed in the project information. The evaluation will consider education, registration, technical certification, training, and longevity of relevant experience. C. Past performance: Past performance on contracts with government agencies and private industry in terms of cost control, quality of work, and compliance with performance schedules. Evaluations will be pulled from Department of Defense (DoD) Past Performance Information Retrieval System (PPIRS) based on the DUNS number for the prime and any subcontractors. D. Capacity to accomplish the work. Demonstrate capacity to accomplish at least four (4) $500,000 individual task orders simultaneously. Additionally, demonstrate capacity of the firm relative to rapid response actions for mobilization and short suspense dates for task completion. E. Knowledge of the locality: Knowledge of flood control, navigation and hydroelectric dam projects of the Columbia, Snake, and Clearwater Rivers Basins and Tributaries. Secondary Criteria: F. Extent of participation of SB, SDBs, WOSBs, HUBZones, SDVOSBs and historically black colleges and universities, and minority institutions in the proposed contract team, measured as a percentage of the total estimated effort. Indicate the estimated percentage involvement of each SB and SDB firm on the team. G. Geographic Proximity to the primary assignment area of the states of Washington, Oregon and Idaho. H. Volume of Department of Defense (DoD) contract awards in the last 12 months, with the objective of effecting an equitable distribution of DoD A-E contracts among qualified firms. 4. SUBMISSION REQUIREMENTS: Interested firms having the capabilities to perform this work must submit two (2) hardcopies of Standard Form (SF) 330, Architect-Engineer Qualifications, Parts I and II for the prime and all subcontractors, along with an electronic copy (CD-ROM). The SF 330 should be complete and specifically address the requirements of this announcement. Address all Selection Criteria in descending order of importance, as defined in the Selection Criteria section of this announcement, in SF 330, Section H. Do not comingle primary and secondary selection criteria. Submit completed SF330 (hardcopy and CD) to U.S. Army Corps of Engineers, Walla Walla District, Contracting Division, 201 North Third Avenue, Walla Walla WA 99362-1876, Attn: Elaine Vandiver, not later than 2:00 PM Pacific Time on May 19, 2016. Solicitation packages are not provided and facsimile transmissions will not be accepted. Personal visits to discuss this project will not be scheduled. This is not a request for proposal and no other general notification will be made. Only timely SF 330s will be considered. Reference W912EF-16-R-0022 in your submission package.

Z--Ice Harbor North Non-Overflow Elevator Rehabilitation

Department of the Army, U.S. Army Corps of Engineers | Published April 3, 2015  -  Deadline May 20, 2015
cpvs

Construction Project: Ice Harbor North Non-Overflow Elevator Rehabilitation The proposed project is to upgrade one elevator located in the North Non-Overflow Spillway at the Ice Harbor Lock and Dam. Upgrading includes: Installation of new elevator systems and equipment to replace the old systems and equipment. Existing features to replaced include: the hoist motor ( including DC motor generator set); the hoist gear box; elevator brakes; hoist way ropes; wedge sockets and shackle rods; rope brake; rope deflector sheaves; speed governor; elevator car and counterweight guide rail shoes, elevator car safeties; counterweight and cable compensation chains; elevator car gates; elevator car flooring, oil buffers for the elevator car and counterweights, elevator electrical systems and wiring to include all traveling elevator car power and communications cabling, disconnect switches, motor feeder elevator car lighting and all associated controls including controller cabinets. This listing is a summary scope of work for informational purposes and is not inclusive all facets of the scope of the project. Place of Performance is at the Ice Harbor Lock and Dam located near Burbank, WA, Walla Walla County. All on-site work shall be performed in accordance with the Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1). Solicitation is open to both small and large business concerns. Solicitation Number W912EF-15-B-0011 will be posted to the Federal Business Opportunities (FBO) website on or about 20 April 2015. The bid opening date will be contained in the solicitation and any solicitation amendments that may be issued. A site visit will be offered approximately 2 weeks after the solicitation is posted. Refer to the solicitation for details regarding the site visit. Construction magnitude is estimated to be between $500,000 and $1,000,000. A bid bond is required in the amount of 20 percent of the total bid price. Performance and payment bonds in the amount of 100 percent of the contract price are required. The North American Industry Classification System (NAICS) code for this work is 238290, Other Building Equipment Contractors. The small business size standard is $15,000,000 in average annual receipts. Important Note: The FBO response date listed elsewhere in this synopsis is for the FedBizOpps archive purposes only. It has no relationship to the actual bid opening date. The bid opening date will be contained in the solicitation and any solicitation amendments that are issued. When issued, the solicitation documents for this project will be available via FedBizOpps.gov or https://www.fbo.gov. NO CD's OR HARD COPIES WILL BE AVAILABLE. Bidders are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document(s) posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to FedBizOpps.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me To Interested Vendors quote mark button in the listing for this solicitation on FedBizOpps.gov. ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires a minimum of 4 weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that they were legally admitted into the United States and have authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with I-551 stamp or attached INS Form I-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form I-151 or I-551), Temporary Resident Card (INS Form I-688), Employment Authorization Card (INS Form I-688A), Reentry Permit (INS Form I-327), Refugee Travel Document (INS Form I-571), Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B). Send this information by email to hillary.a.morgan@usace.army.mil and jamie.m.majerus@usace.army.mil. Foreign nationals must have received clearance prior to being granted access to the project site.
  • 1