Call +44 800 9755 164

Public tenders for electrical in San-diego United States

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!

Z--ELECTRICAL UPGRADES AT SPAWSYSCEN-PACIFIC, NAVAL BASE POINT LOMA, SAN DIEGO, CALIFORNIA.

Department of the Navy, Naval Facilities Engineering Command | Published July 3, 2014
cpvs

THIS PROJECT WAS AWARDED AS AN 8A SOLE SOURCE PROJECT UNDER THE PARTNERSHIP AGREEMENT BETWEEN THE U.S. SMALL BUSINESS ADMINISTRATION AND THE DEPARTMENT OF DEFENSE DATED OCTOBER 23, 2012. PROVIDE ALL NECESSARY LABOR, MATERIAL, AND EQUIPMENT NECESSARY TO INSTALL 220V Y DISTRIBUTION SYSTEM AT BUILDING 605, LAB 114, CONSTRUCT ELECTRICAL DISTRIBUTION SYSTEM UPGRADES AND LAB MODIFICATIONS AT BUILDING 609, AND CONSTRUCT ELECTRICAL DISTRIBUTION SYSTEM UPGRADES, BUILDING 623, SPAWSYSCEN-PACIFIC, NAVAL BASE POINT LOMA, SAN DIEGO, CALIFORNIA.

Y--Building 2 Electrical Upgrades Bonham 549A4-11-102

Department of Veterans Affairs, VA Central Texas Health Care System | Published May 25, 2016
cpvs

NOTICE OF CONTRACT AWARD resulting from solicitation: VA257-16-B-0475: Network Contracting Office, NCO17, has awarded a Firm Fixed Price Construction Contract, VA257-16-C-0155, Building 2 Electrical Upgrade Bonham, Texas, in the amount of $920,500.00; to Cowboy Electrical Services, Inc. Phone No. 830-608-0692. Project consists of, but is not limited to; Contractor shall provide all necessary labor, materials, equipment, tooling, and supervision to perform all requirements of the resulting contract. The project includes, but is not limited to the following; contractor shall furnish all labor, materials, tooling, equipment, supervision and all other necessary provisions to completely prepare site for building operations, including demolition and removal of existing structures, and furnish labor and materials and perform work for Bonham-Building 2 Electrical Upgrades as required by drawings and specifications. ELECTRICAL UPGRADES: Work includes general construction, alterations, drywall, electrical, for necessary removal of existing structures and construction and certain other items: Upgrade existing electrical services for Building 2, Install New Pad Mounted Transformer to feed main-tie-main switchboard, Installation of New Electrical Conductors and Conduit from existing Exterior Pad Mounted Transformer through basement level electrical room, building 2 crawl space and level one (Medical Records). Conductors and Conduit transition to new electrical Bus Duct Riser on the second through fourth floors. Modification of existing electrical service equipment to accommodate new electrical equipment and modification of existing Fire Sprinkler System to accommodate new spaces. Installation of new rated and non-rated partitions to accommodate new electrical equipment. New Interior Finishes to match existing adjacent surfaces on new Partitions. New doors and frames to accommodate new interior spaces and match existing building standard. Refer to electrical drawings for detailed information, new equipment locations and requirements. Refer to mechanical drawings for modification to existing mechanical duct work. Coordinate final room numbering selection with VA COR/Interior Designer. Review with licensed Fire Protection Engineer for modifications to existing sprinkler system. Building No. 2 will be occupied during performance of work; but immediate areas of alterations will be vacated. All project work will be performed on site at the VAMC, NTVHCS, Sam Rayburn Memorial Veterans Center, Bonham, Texas. All project work will be performed on site at the VAMC, NTVHCS, Sam Rayburn Memorial Veterans Center Bonham, Texas. The entire project is to be completed within 180 days from issuance of the Notice to Proceed (NTP). **NOTE: For Subcontracting opportunities, please contact the Prime Contractor: Cowboy Electrical Services, Inc., 880 S. Castell Ave., New Braunfels, TX 78130-7626, Phone No. 830-608-0692 or email: cowboy95@swbell.net

C--N62473-15-D-4812 - 238210 ELECTRICAL JOC FOR NMC AND NBSD SAN DIEGO, CA

Department of the Navy, Naval Facilities Engineering Command | Published March 21, 2015
cpvs

This acquisition is an 8(a) sole-source for 238210 Electrical Job Order Contract (JOC), Indefinite Delivery-Indefinite Quantity (IDIQ) Contract. This contract is under North American Industry Classification System (NAICS) Code 238210, Electrical Contractors and Other Wiring Installation Contractors. The small business size standard is $15,000,000.00. The work requirement comprises establishments primarily engaged in installing and servicing electrical wiring and equipment. Contractors included in this industry may include both the parts and labor when performing work.. The work performed may include new work, reconstruction, rehabilitation, and repairs at Naval Medical Center San Diego and Naval Base San Diego. Period of Performance: March 20, 2015 – March 19, 2018. The guaranteed contract minimum is issuance of Task Order 0001, with no minimum guarantee for any option period. The maximum program value is $4,000,000.00 for the life of the contract.

61 -- Miscellaneous Electrical

Department of the Navy, Space and Naval Warfare Systems Command | Published October 23, 2015  -  Deadline October 29, 2015
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. This is a Total Small Business Set Aside (FAR 52.219-6). Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a Small Business will not be considered for award. Competitive quotes are being requested under N66001-16-T-6609. This requirement is set-aside for small businesses, NAICS code is 335999 and the size standard is 500 employees. Basis of award: The government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest priced technically acceptable. "QUOTE BRAND NAME - DO NOT SUBSTITUTE" Item 0001 Raceway Panduit Ceiling Entrance fitting P/N: DCEFXIW-X Qty 15 each Item 0002 Raceway Panduit Ceiling Entrance fitting P/N: DCEFXIW-X Qty 3 each Item 0003 Raceway Panduit Ceiling Entrance fitting P/N: DCEFXIW-X Qty 2 each Item 0004 Adapter, fits into breakout LD-5 P/N: CA51W-X Qty: 15 each Item 0005 Adapter, fits into breakout LD-5 P/N: CA51W-X Qty: 3 each Item 0006 Adapter, fits into breakout LD-5 P/N: CA51W-X Qty: 2 each Item 0007 Raceway, Panduit, LD5, 6ft P/N: LD5IW6-A Qty: 18 each Item 0008 Raceway, Panduit, LD5, 6ft P/N: LD5IW6-A Qty: 6 each Item 0009 Raceway, Panduit, LD5, 6ft P/N: LD5IW6-A Qty: 6 each Item 0010 Surface Box, Panduit, Single Gang P/N: JB1DIW-A Qty: 15 each Item 0011 Surface Box, Panduit, Single Gang P/N: JB1DIW-A Qty: 3 each Item 0012 Surface Box, Panduit, Single Gang P/N: JB1DIW-A Qty: 2 each Item 0013 Faceplate, Panduit, single Gang P/N: CFPSL2IWY Qty: 10 each Item 0014 Faceplate, Panduit, single Gang P/N: CFPSL2IWY Qty: 2 each Item 0015 Faceplate, Panduit, single Gang P/N: CFPSL2IWY Qty: 2 each Item 0016 Faceplate, Panduit, single Gang P/N: CFPSL4IWY Qty: 2 each Item 0017 2" in cable hook with rod & wire fastener P/N: BCH32-W6 Qty: 1 each Item 0018 1 5/16" in cable hook 50each/pk P/N: BCH21-W6 Qty: 1 each Item 0019 Inner duct, " in P/N: CE4X1-350 Qty: 350 each Item 0020 Inner duct, 1 " in P/N: CH4X1C-150 Qty: 150 each Item 0021 Thread adapter P/N: SCA243E Qty: 100 each Item 0022 Thread adapter P/N: SCA243E Qty: 100 each Item 0023 Thread adapter P/N: SCA243E Qty: 100 each Item 0024 Male Terminal Adapter " IN P/N: SCE943H Qty: 25 each Item 0025 Male Terminal Adapter " IN P/N: SCE943H Qty: 25 each Item 0026 Male Terminal Adapter " IN P/N: SCE943H Qty: 25 each Item 0027 Cooper-Bline Junction box P/N: 884SC Qty: 1 each Item 0028 Miller No-nik stripper, 203 UM min (red) P/N: NN203 Qty: 5 each Item 0029 Corning Bulkhead 24 Fiber LC 12 duplex MM 62.5 P/N: CCH-CP24-A7 Qty: 2 each Item 0030 Pannet 19 IN horizontal cable mgr P/N: WMPSE Qty: 1 each Item 0031 Mini-com metal shielded modular patch P/N: CP24WSBLY Qty: 1 each Item 0032 Blank modular insert black P/N: CMBBL-X Qty: 10 each Item 0033 Blank modular insert black P/N: CMBBL-X Qty: 1 each Item 0034 Shielded jack modules P/N: CJS688TGY Qty: 10 each Item 0035 Shielded jack modules P/N: CJS688TGY Qty: 10 each Item 0036 Hook & loop cable tie, black (Velcro) P/N: HLS-15R0 Qty: 1 each Item 0037 CAT6 Shielded solid bulk cable P/N: EVNSL0601A-1000 Qty: 1 each Item 0038 Duplex LC SR/JR fiber adapter P/N: CMDJLCEI Qty: 5 each Item 0039 Duplex LC SR/JR fiber adapter P/N: CMDJLCEI Qty: 5 each Item 0040 Duplex LC SR/JR fiber adapter P/N: CMDJLCEI Qty: 5 each Item 0041 Blank modular insert, ivory white P/N: CMBEIW Qty: 30 each Item 0042 Blank modular insert, ivory white P/N: CMBEIW Qty: 10 each Item 0043 Blank modular insert, ivory white P/N: CMBEIW Qty: 10 each Item 0044 Cable fiber bulk multimode 62.5 strand P/N: EXP2004A-0500 Qty: 1 each Item 0045 LC Unicam connectors P/N: 95-000-99 Qty: 125 each Item 0046 Cable, MM fiber LC-LC patch 3 meters (orange) *assuming 62.5* P/N: NL62-LCLC-3M Qty: 2 each Item 0047 Cable, MM fiber MTRJ-JC patch 2 meters (orange) *assuming 62.5* P/N: NL62-MTLC-2M Qty: 12 each Item 0048 Cable, MM fiber SC-LC patch 5 meters (orange) *assuming 62.5* P/N: NL62-LCSC-5M Qty: 2 each Item 0049 Cable, MM fiber SC-LC patch 3 meters (orange) *assuming 62.5* P/N: NL62-LCSC-3M Qty: 8 each Item 0050 Cable, CAT6 shielded patch 10ft (blue) P/N: 2601-00800-010 Qty: 3 each Item 0051 Cable, CAT6 shielded patch 5ft (blue) P/N: 2601-00795-005 Qty: 3 each Item 0052 Cable, CAT6 shielded patch 10ft (purple) P/N: 2601-00906-010 Qty: 3 each Item 0053 Cable, CAT6 shielded patch 5ft (purple) P/N: 2601-00901-005 Qty: 3 each Item 0054 KVM, secure DVI-I 4PT P/N: F1DN104B Qty: 10 each Item 0055 Cable, high resolution DVI dual link P/N: DVID4N1USB10 Qty: 20 each Item 0056 Cable 6ft 4IN 1 USB DVI Audio & Mic KV P/N: USBDVI4N1A6 Qty: 10 each Item 0057 Inline network encryptor. Taclane Micro unit (02-2792097-1) fully tactical, 200MB/S (aggregate) INE with copper and fiber interfaces. Haipe IS V3.1.2 and cryptomod compliant. Includes one of each: external ac adapter, console cable, spare CIK with tag, operator manual and 5 year HW/SW warranty. P/N: KG-175D Qty: 1 each Item 0058 Surge protector Surpro 4320J 12 receptacle 300K WTY 8 ft power cord P/N: BP112230-08 Qty: 12 each Item 0059 Monitor 25IN LED WS LCD 1920x1080 G257HL BMIDX VGA DVI BLK 4MS P/N: UM.KG7AA.001 Qty: 10 each Item 0060 Media convertor, 100B-TX RJ45 to 100B-FX MMF LC 2KM media P/N: E-100BTX-FX-05(LC)-NA Qty: 13 each Item 0061 Cable, CAT6 STP shielded patch 6ft (orange) Qty: 2 each Item 0062 Cable, CAT6 UTP patch 6ft Qty: 20 each Item 0063 Cable, MM fiber LC-LC patch 10ft Qty: 20 each Item 0064 Adapter fiber 100MBPS PCIE SCR FETH fiber adapter P/N: AT-2712FX/SC-901 Qty: 10 each Item 0065 Shipping to Japan (JWICS) (Lines 1,4,7,10,13,16,17,19-21,24,27- 30,32,36,38,41,44-49,54-56,58-60,62-64) Qty: 1 lot Item 0066 NCTS Mini tower system STRATUS A416 MINI-TOWER (STRATUS MT 9280) SYSTEM NCS STRATUS MT CHASSIS W/ 5.25"" EXTERNAL (2), 3.5"" EXTERNAL (1), 3.5" INTERNAL (1), 2.5" INTERNAL (1) BAYS2 X USB 3.0, 2 X USB 2.0, 1 X HEADPHONE, 1 X MICROPHONE MBD Q87 ATX UP 1600MHZ LGA1150 SATA ASUS Q87M-E/CSM INTEGRATED INTEL GIGABIT NETWORK CONROLLER (DISABLED) TRUSTED PLATFORM MODULE VERSION 1.2 ON-BOARD CPU 3.10GHZ DT QUAD-CORE SOCKET-1150/H3 (LGA1150) 6MB 84W INTEL CORE I5-4440 BX80646I54440 (2) 8GB (2 X 4GB) 240-PIN DDR3 1600MHZ (PC12800) DESKTOP MEMORY 500GB 7200RPM SATA III 6.0GB/S 3.5" HARD DRIVE 18X DVD-ROM SATA OPTICAL DRIVE (IHDS118-04) NVIDIA GEFORCE GT 610 1GB DDR3 PCIE 2.0 X16 GRAPHICS CARD W/VGA, DVI, AND HDMI CONNECTORS (GT610-SL-1GD3-L) ALLIED TELESIS AT-2701FTXA/SC PCI NETWORK ADAPTER, 1 X SC 100BASE-FX, 1 X RJ-45 10/100BASE-TX WINDOWS 7 PROFESSIONAL 32/64-BIT OS LICENSE; BOOT ORDER SETTINGS: MBA AND THEN HARD DRIVE 360W ATX 80 PLUS GOLD POWER SUPPLY WITH 6FT POWER CABLE NEMA 5-15 SUPPLY END TO C14 EQUIPMENT END POWER CABLE 5.25" BAY AMPLIFIED SPEAKER WITH VOLUME CONTROL KNOB, (1) HEADPHONE AND (1) AUX-IN JACK (CA-1001WB) NCS 104 KEY USB KEYBOARD NCS 3-BUTTON USB OPTICAL MOUSE THREE (3) YEAR DEPOT PARTS AND LABOR WITH HARD DRIVE RETENTION; END USER WILL NOT BE REQUIRED TO RETURN FAILED HARD DRIVE IN ORDER TO OBTAIN A REPLACEMENT UNDER THE PARTS WARRANTY. P/N: A416 Qty: 10 each Item 0067 Cable, CAT6 shielded patch 10ft (purple) P/N: 2601-00906-010 Qty: 3 each Item 0068 Cable, CAT6 shielded patch 5ft (purple) Qty: 3 each Item 0069 Shipping to Japan (PASS K) (Lines 2,5,8,11,14,18,22,25,33-34,39,42,52- 53,57,61) Qty: 1 lot Item 0070 Shipping to Japan (BISON) (Lines 3,6,9,12,23,26,31,35,37,40,43,50,51,67,68,70) Qty: 1 lot To be considered for award, the offeror certifies that the product(s) being offered is an original, new and Trade Agreements Act (TAA) compliant product, and that the subject products are eligible for all manufacturer warranties and other ancillary services or options provided by the manufacturer. Offeror further certifies that it is authorized by the manufacturer to sell the products that are the subject of this action in the US (i.e., that the products are TAA compliant and that the offeror is authorized to sell them in the US). Offerors are required to submit documentation with the offer identifying its supply chain for the product, and certifying that all products are new, TAA compliant, and in their original packaging. By making an offer, offeror also consents to no cost cancellation of the non-compliant awarded items if, upon inspection after delivery, any products provided are not recognized or acknowledged by the manufacturer as new and original products that are eligible for warranties and all other ancillary services or options provided by the manufacturer or that offeror was not authorized by the manufacturer to sell the product in the US, or that the product is in some manner not TAA compliant. " Note: "Vendor must provide at time of submission of quote their authorized distributor information (POC, phone number) and/or any documentation supporting that the items are actually coming from that distributor, i.e. certification, letter or copy of invoice. Failure to provide such proof will be treated as non-responsive and your quote(s) will not be considered for award." Vendors: Make sure to reference the following information in the quote: a. Dun & Bradstreet number b. Cage Code c. Business Size d. RFQ Number N66001-16-T-6609 e. Requested Delivery date: 30 days after receipt of order (ARO) f. Preferred method of shipment: FOB Destination. Ship to Address: N66120 Japan SPAWARSYSFACPAC, Yokosuka Receiving Officer Bldg A-40 1 Chome Honcho, Yokosuka-Shi Kanagawa-ken 14 2380041 This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-81 (08/03/2015) and Defense Federal Acquisition Regulation Supplement (DFARS), June 26, 2015. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The following clauses shown below can be accessed in full text at www.farsite.hill.af.mil/: 52.204-2, Security Requirements 52.204-6, Data Universal Numbering System (DUNS) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.212-1, Instructions to Offerors Commercial Items 52.212-2, Evaluation Commercial Items 52.212-3, Offeror Representations and Certifications - Commercial Items 52.212-4, Contract Terms and Conditions - Commercial Items 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive OrdersCommercial Items (Deviation 2013-O0019) (July 2014) 52.219-6, Notice of Total Small Business Set-Aside 52.219-28, Post-Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child LaborCooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g)) 52.223-15, Energy Efficiency In Energy-Consuming Products 52.223-16, Acquisition of EPEAT-Registered Personal Computer Products 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds TransferSystem for Award Management 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.239-1, Privacy or Security Safeguards 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7000, Disclosure of Information 252.204-7004 Alternate A, System for Award Management 252.204-7012, Safeguarding of Unclassified Controlled Technical Information 252.209-7998, Representation Regarding Conviction of a Felony Criminal Violation under any Federal or State Law. 252.209-7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law 252.212-7000, Offeror Representations and Certifications--Commercial Items 252.225-7001, Buy American and Balance of Payments Program 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area Workflow Payment Instructions 252.203-7998 - Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements? Representation. (DEVIATION 2015-O0010) PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS? REPRESENTATION (DEVIATION 2015- O0010) (FEB 2015) (a) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (End of provision) 252.203-7999 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS.(DEVIATION 2015-O0010) (FEB 2015) (a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d)(1) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015, (Pub. L. 113-235), use of funds appropriated (or otherwise made available) under that or any other Act may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. This RFQ closes Oct 29, 2015 at 09:00 am, Pacific Standard Time (PST). Quotes must be uploaded on the SPAWAR e-commerce website at https://e- commerce.sscno.nmci.navy.mil under SSC Pacific/Simplified Acquisitions/N66001-16-T-6609. The point of contact for this solicitation is Fred Espiritu at Frederick.p.espiritu@navy.mil. Please include RFQ N66001-16-T-6609 on all inquiries. All responding vendors must have a completed registration in the System for Award Management (SAM) program prior to award of contract. Information to register in SAM can be found at: https://www.sam.gov/portal/public/SAM/. Complete SAM registration means a registered DUNS and CAGE Code numbers.

59 -- ELECTRICAL EQUIPMENT

Department of the Navy, Space and Naval Warfare Systems Command | Published November 5, 2015  -  Deadline November 10, 2015
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. This is a Total Small Business Set Aside (FAR 52.219-6). Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a Small Business will not be considered for award. Competitive quotes are being requested under N66001-16-T-6057. This requirement is set-aside for small businesses, NAICS code is 335999 and the size standard is 500 employees. Basis for award: The government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest priced technically acceptable quote. Quotes Will Be Evaluated on an All or None Basis. "Quote Brand Name or Equal." Please submit Quote in Line Item Sequence - DO NOT DEVIATE. See attached Specifications for Line items 0001 thru 0133. The statement below applies to CLINs 0001 thru 0125: To be considered for award, the offeror certifies that the product(s) being offered is an original, new, and Trade Agreements Act (TAA) compliant product, and that the subject products are eligible for all manufacturer warranties and other ancillary services or options provided by the manufacturer. Offeror further certifies that it is authorized by the manufacturer to sell the products that are the subject of this action in the US (i.e., that the products are TAA compliant and that the offeror is authorized to sell them in the US). Offerors are required to submit documentation with the offer identifying its supply chain for the product, and certifying that all products are new, TAA compliant, and in their original packaging. By making an offer, offeror also consents to no cost cancellation of the non-compliant awarded items if, upon inspection after delivery, any products provided are not recognized or acknowledged by the manufacturer as new and original products that are eligible for warranties and all other ancillary services or options provided by the manufacturer or that offeror was not authorized by the manufacturer to sell the product in the US, or that the product is in some manner not TAA compliant." NOTE: "Vendor must provide at time of submission of quote their authorized distributor information (POC, phone number) and/or any documentation supporting that the items are actually coming from that distributor, i.e. certification, letter or copy of invoice. Failure to provide such proof will be treated as non-responsive and your quote(s) will not be considered for award." Vendors: Make sure to reference the following information in the quote: a. Dun & Bradstreet number b. Cage Code c. Business Size d. RFQ Number: N66001-16-T-6057 e. Requested delivery date: 30 days or sooner ARO f. Preferred method of shipment: F.O.B. Destination Ship to Address: N66120, SPAWARSYSPACFAC Receiving Officer BLDG A-40 1-Chome Honcho, Yokosuka-Shi Kanagawa-Ken, Japan 238-0041 Line item 0126 estimated cost for TN 15-4402 QTY: 1 LOT Line item 0127 estimated cost for TN 15-4406 QTY: 1 LOT Line item 0128 estimated cost for TN 15-4407 QTY: 1 LOT Line item 0129 estimated cost for TN 15-4408 QTY: 1 LOT Line item 0130 estimated cost for TN 15-4413 QTY: 1 LOT Line item 0131 estimated cost for TN 15-4415 QTY: 1 LOT Line item 0132 estimated cost for TN 15-4400 QTY: 1 LOT Line item 0133 estimated cost for TN 15-4412 QTY: 1 LOT This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-81 (08/03/2015) and Defense Federal Acquisition Regulation Supplement (DFARS), June 26, 2015. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The following clauses shown below can be accessed in full text at http://farsite.hill.af.mil: 52.204-2, Security Requirements 52.204-6, Data Universal Numbering System (DUNS) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.212-1, Instructions to Offerors Commercial Items 52.212-2, Evaluation Commercial Items 52.212-3, Offeror Representations and Certifications - Commercial Items 52.212-4, Contract Terms and Conditions - Commercial Items 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive OrdersCommercial Items (Deviation 2013-O0019) (July 2014) 52.219-6, Notice of Total Small Business Set-Aside 52.219-28, Post-Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child LaborCooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Veterans 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.222-37, Employment Reports on Veterans 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g)) 52.223-15, Energy Efficiency In Energy-Consuming Products 52.223-16, Acquisition of EPEAT-Registered Personal Computer Products 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds TransferSystem for Award Management 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.239-1, Privacy or Security Safeguards 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7000, Disclosure of Information 252.204-7004 Alternate A, System for Award Management 252.204-7012, Safeguarding of Unclassified Controlled Technical Information 252.209-7998, Representation Regarding Conviction of a Felony Criminal Violation under any Federal or State Law. 252.209-7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law 252.211-7003, Item Unique Identification & Valuation 252.212-7000, Offeror Representations and Certifications--Commercial Items 252.225-7001, Buy American and Balance of Payments Program 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area Workflow Payment Instructions 252.203-7998 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality AgreementsRepresentation. (DEVIATION 2015- O0010) (FEB 2015) (a) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (End of provision) 252.203-7999 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS.(DEVIATION 2015-O0010) (FEB 2015) (a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d)(1) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015, (Pub. L. 113-235), use of funds appropriated (or otherwise made available) under that or any other Act may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause. (End of clause) This RFQ closes November 10, 2015 at 2:00 P.M., Pacific Standard Time (PST). Quotes must be uploaded on the SPAWAR e-commerce website at https://e- commerce.sscno.nmci.navy.mil under SSC Pacific/Simplified Acquisitions/N66001-16-T-6057. The point of contact for this solicitation is Cynthia Horriat at cynthia.horriat@navy.mil. Please include RFQ N66001-16-T-6057 on all inquiries. All responding vendors must have a completed registration in the System for Award Management (SAM) program prior to award of contract. Information to register in SAM can be found at: https://www.sam.gov/portal/public/SAM/. Complete SAM registration means a registered DUNS and CAGE Code numbers.

70 -- VICOR ELECTRICAL PARTS

Department of the Navy, Space and Naval Warfare Systems Command | Published March 12, 2015  -  Deadline March 18, 2015
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. This is a Total Small Business Set Aside (FAR 52.219-6). Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a Small Business Concern will not be considered for award. Competitive quotes are being requested under N66001-15-T-7443. This requirement is set-aside for small businesses, NAICS code is 334419 and the size standard is 750 employees. Basis for award: The government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest priced technically acceptable quote. BRAND NAME REQUIREMENT Item 0001 VICOR INMATE, 900, BOB, SL 5 SET P/N: 18364 QTY: 10 EACH Item 0002 VICOR INMATE SET, 700, BIB, SL 5 SET P/N: 18372 QTY: 10 EACH Item 0003 VICOR MAXI THERMATE THERM PADS 10 PC P/N: 20263 QTY: 5 EACH Item 0004 VICOR HOLDUP BOX/HAM 470UF 2.346IN P/N: HUB470-P QTY: 20 EACH Item 0005 VICOR SOFT HB VI-HAM-CL ROHS P/N: VE-HAM-CL QTY: 12 EACH Item 0006 VICOR C 250/425/375 5v/10A P/N: V375C5C50BG3 QTY: 15 EACH Item 0007 VICOR C 250/425/375 12v/6.25a P/N: V375C12C75BG3 QTY: 15 EACH Item 0008 VICOR C 250/425/375 48v/8.33A P/N: V375A48C400BG3 QTY: 15 EACH FOB DESTINATION Ship to Address: SPAWAR Systems Center Pacific Receiving Officer 4297 Pacific Highway, Bldg OT7 San Diego, CA 92110-5000 Vendors: make sure you reference the following information in the quote: a. DUN & Bradstreet number b. CAGE Code c. Business size d. Delivery date e. RFQ Number: N66001-15-T-7443 "The statement below applies to CLIN 0001-0008. To be considered for award, the offeror certifies that the product being offered is an original, new and Trade Agreements Act (TAA) compliant product, and that the subject products are eligible for all manufacturer warranties and other ancillary services or options provided by the manufacturer. Offeror further certifies that it is authorized by the manufacturer to sell the products that are the subject of this action in the U.S. (i.e., that the products are TAA compliant and that the offeror is authorized to sell them in the U.S.). Offerors are required to submit documentation with the offer identifying its supply chain for the product, and certifying that all products are new, TAA compliant, and in their original packaging. By making an offer, offeror also consents to no cost cancellation of the non-compliant awarded items if, upon inspection after delivery, any products provided are not recognized or acknowledged by the manufacturer as new and original products that are eligible for warranties and all other ancillary services or options provided by the manufacturer or that offeror was not authorized by the manufacturer to sell the product in the U.S., or that the product is in some manner not TAA compliant." This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-80 (02 Mar 2015) and Defense Federal Acquisition Regulation Supplement (DFARS) (26 Feb 2015). It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses can be accessed in full text at www.farsite.hill.af.mil. FAR Clause at 52.212-1, Instructions to Offerors Commercial, and 52.212-4, Contract Terms and Conditions Commercial Items, incorporated by reference, applies to this acquisition. FAR Clause 52.212-3, Offeror Representations and Certifications -- Commercial Items applies to this acquisition in e-Commerce. FAR Clause at 52.212-2 Evaluation Commercial Items basis for award will be the lowest priced technically acceptable quote. Current FAR & DFARS. FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders, 52.222-3, Convict Labor (E.O. 11755), 52.222-19, Child LaborCooperation with Authorities and Remedies (E.O. 13126), 52.222-21, Prohibition of Segregated Facilities (Feb 1999), 52.222-26, Equal Opportunity (E.O. 11246), 52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury), 52.232-33, Payment by Electronic Funds Transfer Central Contractor Registration (31 U.S.C. 3332), 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive OrdersCommercial Items (Deviation) also applies to this acquisition, 52.204-99, System for Award Management Registration (Deviation), 52.222-36, Affirmative Action for Workers with Disabilities, DFARS 252.209-7998, Representation Regarding Conviction of a felony Criminal Violation under any Federal or State Law, 252.204-7000, Disclosure of Information, 252.204-7012, Safeguarding of Unclassified Controlled Technical Information, 252.211- 7003, Item Unique Identification and Valuation, 252.203-7998, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements Representation (Deviation 2015-00010) (FEB 2015) and 252.203-7999, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements (Deviation 2015-00010) (FEB 2015). This RFQ closes on March 18, 2015 at 10:00, A.M., Pacific Standard Time (PST). Quotes must be uploaded on the SPAWAR e-commerce website at https://e- commerce.sscno.nmci.navy.mil under SSC Pacific/Simplified Acquisitions/N66001-15- T-7443. The point of contact for this solicitation is Shawna Nevins at Shawna.Nevins@navy.mil. Please include RFQ N66001-15-T-7443 on all inquiries. All responding vendors must have a completed registration in the System for Award Management (SAM) program prior to award of contract. Information to register in SAM can be found at: https://www.sam.gov/portal/public/SAM/. Complete SAM registration means a registered DUNS and CAGE Code numbers. 252.203-7998 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality AgreementsRepresentation. (DEVIATION 2015-O0010) Insert the following provision in all solicitations that will use funds made available by the Financial Services and General Government Appropriations Act, 2015 (Division E of the Consolidated and Further Continuing Appropriations Act, 2015, Pub. L. 113-235), or any other Act, including solicitations for the acquisition of commercial items under FAR part 12. PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTSREPRESENTATION (DEVIATION 2015-O0010) (FEB 2015) (a) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (End of provision) 252.203-7999 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS.(DEVIATION 2015-O0010) (FEB 2015) (a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d)(1) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015, (Pub. L. 113-235), use of funds appropriated (or otherwise made available) under that or any other Act may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause. (End of clause)

61 -- Cables and Electrical Hardware

Department of the Navy, Space and Naval Warfare Systems Command | Published December 8, 2015  -  Deadline December 15, 2015
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. Competitive quotes are being requested under N66001-16-T-7418. This requirement is set-aside for small businesses, NAICS code is 237130 and the size standard is $36,500,000.00. This requirement is for Brand Name or Equal: See attached Specifications. **THIS IS A BRAND NAME OR EQUAL REQUIREMENT. ** DELIVERY IS DOOR TO DOOR; SEE BELOW ** Reference SPAWAR RFQ # N66001-16-T-7418 on all quotes *** Line Item 0001: Locking Nut P/N: 7513K242 QTY: 50 EA Line Item 0002: Screw Connector P/N: 7798K41 QTY: 120 EA Line Item 0003: Mounting Skirt P/N: D9002$B!>(B5 QTY: 24 EA Line Item 0004: Conduit Box P/N: D56 QTY: 12 EA Line Item 0005: Aluminum Sheet P/N: 9057K122 QTY: 75 EA Line Item 0006: Blind Rivet (250/PK) P/N: 97447A025 QTY: 1 EA Line Item 0007: Machine Screw(1000/PK) P/N: 91735A154 QTY: 20 EA Line Item 0008: SHIPPING CHARGE LINE ITEMS # 1$B!>(B7 TO YOKOSUKA JAPAN QTY: 1 Lot Line Item 0009: J hook (50/bx) P/N: JP131DW$B!>(BL20 QTY: 6 EA Line Item 0010: Labels, rack ount units, ascending, pkg of 4 P/N: GL$B!>(BRMUTA QTY: 2 EA Line Item 0011: CPI TRIANGULAR SUPPORT BRACKET, 18"W P/N: 11746$B!>(B718 QTY: 2 EA Line Item 0012: SHIPPING CHARGE LINE ITEMS # 9$B!>(B11 TO YOKOSUKA JAPAN QTY: 1 Lot Line Item 0013: Round Locking Nut P/N: 7513K245 QTY: 10 EA Line Item 0014: Conduit Box P/N: D56 QTY: 3 EA Line Item 0015: SHIPPING CHARGE LINE ITEMS # 13 ? 14 TO YOKOSUKA JAPAN QTY: 1 Lot Line Item 0016: PATCH CORD, 5M, SC$B!>(BMTRJ, 62.5/125 MICRON, MM, PLENUM, GREEN FIBER OPTIC CABLE P/N: FOCMP62$B!>(B 005M$B!>(BSCMT$B!>(B GN QTY: 180 EA Line Item 0017: PATCH CORD, 5M, SC$B!>(BSC, 62.5/125 MICRON, MM, PLENUM, GREEN FIBER OPTIC CABLE P/N: 37187 QTY: 170 EA Line Item 0018: LC Connector hot melt jackted LC duplex MM, 900 micron P/N: 6601$B!>(BD QTY: 180 EA Line Item 0019: SC Module mm duplex adapter P/N: CMDBLSCIW QTY: 40 EA Line Item 0020: SHIPPING CHARGE LINE ITEMS # 16 - 19 TO YOKOSUKA JAPAN QTY: 1 Lot SHIPPING CHARGES DOOR TO DOOR(NOTE: If not included in prices) IF THERE IS A SEPARATE SHIPPING COST (NOT INLUDED IN PRICE) AND (NOT A FIRM FIXED PRICE LESS THEN $100.00) SUPPORTING DOCUMENMTATION WILL BE REQUIRED SUBSTANTIATING SHIPPING COST DELIVERY ADDRESS (DOOR TO DOOR) U.S. FLEET ACTIVITIES YOKOSUKA SPAWAR, BLDG 1-40 1 CHOME HONCHO, YOKOSUKA-SHI KANAGAWA-KEN, JAPAN 238-0041 ATTN: SHIN OOI PH: 046 816-8291 Basis for award: The government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest priced technically acceptable quote. FAR 52.252-2 (http://farsite.hill.af.mil) DFARS 252.204-7000 DISCLOSURE OF INFORMATION (AUG 2013) DFARS 252.204-7012 SAFEGUARDING OF UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION (NOV 2013) This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-85 (04/12/2015) and Defense Federal Acquisition Regulation Supplement (DFARS), 30 Nov 2015. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses can be accessed in full text at www.farsite.hill.af.mil. FAR Clause at 52.212-1, Instructions to Offerors Commercial, and 52.212-4, Contract Terms and Conditions Commercial Items, incorporated by reference, applies to this acquisition. FAR Clause 52.212-3, Offeror Representations and Certifications -- Commercial Items and DFARS 252.212-7000 Offeror Representations and Certifications-- Commercial Items applies to this acquisition in e-Commerce. FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders, 52.219-6, Notice of Total Small Business Set-Aside, 52.222-3, Convict Labor (E.O. 11755), 52.222-19, Child Labor?Cooperation with Authorities and Remedies (E.O. 13126), 52.222-21, Prohibition of Segregated Facilities (Feb 1999), 52.222-26, Equal Opportunity (E.O. 11246), 52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury), 52.232-33, Payment by Electronic Funds Transfer? Central Contractor Registration (31 U.S.C. 3332), 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items (Deviation) also applies to this acquisition, 52.204-99, System for Award Management Registration (Deviation), 52.222-36, Affirmative Action for Workers with Disabilities, 52.204-2, Security Requirements, 2012-00007 Class Deviation- Representation Regarding Conviction of a Felony Criminal Violation under any Federal or State Law, DFARS 252.204-7000 (Disclosure of Information), DFARS 252.204-7012 (Safeguarding of Unclassified Controlled Technical Information) . DFARS 252.203-7998 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements-Representation. (DEVIATION 2015-O0010) PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS-REPRESENTATION (DEVIATION 2015-O0010) (FEB 2015) (a) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (End of provision) DFARS 252.203-7999 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements. (DEVIATION 2015-O0010) PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2015-O0010)(FEB 2015) (a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d)(1) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015, (Pub. L. 113-235), use of funds appropriated (or otherwise made available) under that or any other Act may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause. (End of clause) To respond to this announcement, you must be registered to the SPAWAR E-Commerce website at https://e-commerce.sscno.nmci.navy.mil and upload your inquiry under SSC Pacific/Simplified Acquisitions/N66001-16-T-7418 This RFQ closes on 15 Dec 2015, at 9:00 AM, (PST). Quotes uploaded on the SPAWAR e- commerce website at https://e-commerce.sscno.nmci.navy.mil under SSC Pacific/Simplified Acquisitions/N66001-16-T-7418. The point of contact for this solicitation is Gerald Burch, gerald.burch@navy.mil Please include RFQ N66001-16-T-7418 on all inquiries. All responding vendors must have a completed registration in the System for Award Management (SAM) program prior to award of contract. Information to register in SAM can be found at: https://www.sam.gov/portal/public/SAM/. Complete SAM registration means a registered DUNS and CAGE Code numbers.

Z--Emergency Electrical Bus Bar

Department of the Navy, Naval Facilities Engineering Command | Published April 13, 2016
cpvs

No Description Provided

Defense Information Systems Agency Building 200, Electrical Capacity Upgrade

Department of the Army, U.S. Army Corps of Engineers | Published July 19, 2016  -  Deadline August 3, 2016
cpvs

Building 200 houses the DISA San Antonio datacenter located at 3326 General Hudnell, San Antonio, Texas, including the electrical and mechanical infrastructure elements, raised floor areas and security systems to provide continuous 24 hour operations. As part of the electrical infrastructure, the building has two electrical power feeds delivering utility power to the facility. The power is delivered at 13.2kV, through a 2,500kVA transformer stepping it down to 480V. Each transformer feeds a walk-in utility switchgear enclosure rated at 3,200Amps. Each utility enclosure contains several breakers. These walk-in utility enclosures are labeled as Utility Bus ‘A' and Utility Bus ‘B'. Each Utility Bus has an output breaker feeding the ‘A' and ‘B' bus Essential Distribution Switchgear. The Essential Distribution Switchgear contains breakers that supply power to the ‘A' Bus and ‘B' Bus UPS Modules, Static Bypass Switches and Maintenance Bypass Switches. The UPS system is set up in a 2(N+1) redundancy, such that either side can be shut down while still maintaining power to all critical equipment. The Essential Distribution Switchgear ‘A' and Essential Distribution Switchgear ‘B' also supply all non-UPS loads including all essential cooling equipment system components (pumps, valves, chillers, cooling towers, etc), lighting, and general building power. Both utility enclosures are supported by the generator back-up power system which automatically transfers both substations to generator power in the event of a commercial power loss. The generator system consists of three (3) Caterpillar 3512 diesel/generator sets rated at 1875kVA/1500kW each, and a full set of generator paralleling switchgear. System is designed for a load of 3750kW with N+1 redundancy. This switchgear cabinet contains the generator tie breakers which feed each of the substation generator breakers. It also houses the paralleling and transfer operations logic and control systems. The generators and switchgear were installed in 2009. A building load test in performed monthly with a simulated utility loss test. The majority of the essential systems components are installed in redundant pairs. The facility is equipped with two 700 ton chillers, two chilled water pumps, two condenser water pumps, and two cooling towers. Only one chiller paired with associated cooling tower and one of each pump is required to meet the facility cooling demands. The Contractor shall segregate the facilities mechanical loads from the critical loads. Currently, the mechanical loads and the critical loads are fed from same the Essential Distribution Switchgear. In order to segregate the mechanical loads from the critical loads (UPS), new UPS distribution switchgear, 2ea new UPS modules will be added and 2ea existing UPS modules will be removed. The existing UPS modules and the new UPS modules will be fed from new Critical Distribution Switchgear including the installation of two new utility transformers to feed the new Critical Distribution Switchgear. The existing mechanical loads will remain being fed from the Essential Distribution Switchgear. The project will also include the addition of one new emergency generator, new generator paralleling switchgear to support the existing generators (3ea) and new generator (1ea) and a new generator control panel. This will result in a more robust and reliable electrical and mechanical distribution system. This system shall allow for an automatic or user initiated closed transition from generators to utility and automatic transition from utility to generators upon commercial power failure. In addition to the new Critical Distribution Switchgear, new UPS Output Critical Distribution Switchboards (2ea) will be installed to feed critical loads in multiple computer rooms.

58 -- ELECTRICAL HARDWARE / PR#1300553262 GUAM

Department of the Navy, Space and Naval Warfare Systems Command | Published February 22, 2016  -  Deadline February 29, 2016
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. This is a Total Small Business Set Aside (FAR 52.219-6). Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a Small Business will not be considered for award. Competitive quotes are being requested under N66001-16-T-6242. This requirement is set-aside for small businesses, NAICS code is 335931 and the size standard is 500 employees. QUOTE "BRAND NAME OR EQUAL" SEE ATTACHED BOM FOR PURCHASE DESCRIPTIONS. THE DESCRIPTION IS UPLOADED ON THE SPAWAR e-COMMERCE WEBSITE. SUBMIT QUOTE IN LINE ITEM SEQUENCE. QUOTES WILL BE EVALUATED ON AN "ALL OR NONE" BASIS. PLEASE NOTE: DFARS 252.211-7003, Unique Identification & Valuation applies to any tangible item which unit cost is $5,000.00 or more. Please quote the cost for UID labels and registration as a separate CLIN on the quote if the labels are not included at no COST. If cost is included, please state that the cost is included at NO COST to the government in all items that cost $5,000.00 or mote. Basis for award: 1. The Government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest priced, technically acceptable quote. "To be considered for award, the offeror certifies that the product(s) being offered is an original, new and Trade Agreements Act (TAA) compliant product, and that the subject products are eligible for all manufacturer warranties and other ancillary services or options provided by the manufacturer. Offeror further certifies that it is authorized by the manufacturer to sell the products that are the subject of this action in the US (i.e., that the products are TAA compliant and that the offeror is authorized to sell them in the US). Offerors are required to submit documentation with the offer identifying its supply chain for the product, and certifying that all products are new, TAA compliant, and in their original packaging. By making an offer, offeror also consents to no cost cancellation of the non-compliant awarded items if, upon inspection after delivery, any products provided are not recognized or acknowledged by the manufacturer as new and original products that are eligible for warranties and all other ancillary services or options provided by the manufacturer or that offeror was not authorized by the manufacturer to sell the product in the US, or that the product is in some manner not TAA compliant." Vendors: Make sure to reference the following information in the quote: a. Dun & Bradstreet number b. Cage Code c. Business Size d. RFQ Number N66001-16-T-6242 e. Preferred Delivery: F.O. B. Destination. If quoting FOB origin, shipping estimate must be provided. f. Indicate delivery lead time after receipt of order. Delivery Address: U.S. NAVAL BASE GUAM SPAWAR GUAM, BLDG. 1657F S.MARINE DRIVE; SANTA RITA, GUAM 96915 This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-84 (10/05/2015) and Defense Federal Acquisition Regulation Supplement (DFARS), DPN 20151001(Effective 01 Oct 2015). It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The following clauses shown below can be accessed in full text at www.farsite.hill.af.mil/: 52.204-2, Security Requirements 52.204-6, Data Universal Numbering System (DUNS) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Dec 2010) (31 U.S.C. 6101 note) 52.212-1, Instructions to Offerors Commercial Items 52.212-2, Evaluation Commercial Items 52.212-3, Offeror Representations and Certifications - Commercial Items 52.212-4, Contract Terms and Conditions - Commercial Items 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items 52.214-3, Amendments to Invitations for Bids 52.214-4, False Statements and Bids 52.214-5, Submission of Bids 52.214-6, Explanation to Prospective Bidders 52.214-7, Late Submissions, Modifications, and Withdrawals of Bids. 52.219-6, Notice of Total Small Business Set-Aside 52.222-3, Convict LaborE.O. 11755) 52.222-19, Child LaborCooperation with Authorities and Remedies (E.O. 13126) 52.222-21, Prohibition of Segregated Facilities (Feb 1999) 52.222-26, Equal Opportunity(E.O. 11246) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g)) 52.219-6, Notice of Total Small Business Set-Aside 52.219-28, Post-Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child LaborCooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.222.37, Employment Reports on Veterans (July 2014) (38 U.S.C. 4212) 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g) 52.223-15, Energy Efficiency in Energy-Consuming Products 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds TransferSystem for Award Management 52.233-3, Protest after Award 52.233-4, Applicable Law for Breach of Contract Claim 52.239-1, Privacy or Security Safeguards 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7000, Disclosure of Information 252.204-7004 Alternate A, System for Award Management 252.204-7012, Safeguarding of Unclassified Controlled Technical Information 252.209-7998, Representation Regarding Conviction of a Felony Criminal Violation under any Federal or State Law. 252.209-7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law 252.212-7000, Offeror Representations and Certifications--Commercial Items 252.225-7001, Buy American and Balance of Payments Program 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area Workflow Payment Instructions This RFQ closes February 29, 2016 at 10:00 PST, Pacific Standard Time (PST). Quotes must be uploaded on the SPAWAR e-commerce website at https://e- commerce.sscno.nmci.navy.mil under SSC Pacific/Simplified Acquisitions/N66001-16-T-6242. The point of contacts for this solicitation is Danilo Ibarra at Danilo.Ibarra@navy.mil. Please include RFQ N66001-16-T-6242 on all inquiries. All responding vendors must have a completed registration in the System for Award Management (SAM) program prior to award of contract. Information to register in SAM can be found at: https://www.sam.gov/portal/public/SAM/.

Electrical Repairs

Department of Labor, Employment Training Administration | Published October 31, 2014  -  Deadline November 11, 2014
cpvs

This is a Subcontracting Opportunity with Treasure Island Job Corps Center / Adams & Associates Inc. and not with the Department of Labor. There will be a mandatory bid walk on November 11, 2014 at 10am. Only vendors present at the bid walk will be allowed to submit a bid.

Y--8(a) Sole Source NAICS 237130 Electrical Contractor

Department of the Navy, Naval Facilities Engineering Command | Published January 25, 2016
cpvs

No Description Provided

60 -- Various Fiber Optic Cables, Patch Cords, & Electrical Supplies

Department of the Navy, Space and Naval Warfare Systems Command | Published February 25, 2016  -  Deadline March 7, 2017
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. This is a Total Small Business Set Aside (FAR 52.219-6). Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a Small Business will not be considered for award. Competitive quotes are being requested under N66001-16-T-6078. This requirement is set-aside for small businesses, NAICS code is 335921 and the size standard is 1,000 employees. Basis for award: The government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest priced technically acceptable quote. Quotes Will Be Evaluated on an All or None Basis. Quote Brand Name or Equal. See attached Specifications for Line Item 0001 thru 0035. The statement below applies to CLINs 0001 thru 0035: To be considered for award, the offeror certifies that the product(s) being offered is an original, new, and Trade Agreements Act (TAA) compliant product, and that the subject products are eligible for all manufacturer warranties and other ancillary services or options provided by the manufacturer. Offeror further certifies that it is authorized by the manufacturer to sell the products that are the subject of this action in the US (i.e., that the products are TAA compliant and that the offeror is authorized to sell them in the US). Offerors are required to submit documentation with the offer identifying its supply chain for the product, and certifying that all products are new, TAA compliant, and in their original packaging. By making an offer, offeror also consents to no cost cancellation of the non-compliant awarded items if, upon inspection after delivery, any products provided are not recognized or acknowledged by the manufacturer as new and original products that are eligible for warranties and all other ancillary services or options provided by the manufacturer or that offeror was not authorized by the manufacturer to sell the product in the US, or that the product is in some manner not TAA compliant." Vendors: Make sure to reference the following information in the quote: a. Dun & Bradstreet number b. Cage Code c. Business Size d. RFQ Number: N66001-16-T-6078 e. Requested delivery date: 30 days or sooner ARO f. Preferred method of shipment: F.O.B. Destination Ship to Address: SPAWAR Systems Center Pacific Receiving Officer 4297 Pacific Highway, Bldg OT7 San Diego, CA 92110-5000 This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-81 (08/03/2015) and Defense Federal Acquisition Regulation Supplement (DFARS), June 26, 2015. It is the Responsibility of the contractor to be familiar with the applicable clauses and Provisions. The following clauses shown below can be accessed in full text at http://farsite.hill.af.mil: 52.204-2, Security Requirements 52.204-6, Data Universal Numbering System (DUNS) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.212-1, Instructions to Offerors Commercial Items 52.212-2, Evaluation Commercial Items 52.212-3, Offeror Representations and Certifications - Commercial Items 52.212-4, Contract Terms and Conditions - Commercial Items 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive OrdersCommercial Items (Deviation 2013-O0019) (July 2014) 52.219-6, Notice of Total Small Business Set-Aside 52.219-28, Post-Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child LaborCooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Veterans 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.222-37, Employment Reports on Veterans 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g)) 52.223-15, Energy Efficiency In Energy-Consuming Products 52.223-16, Acquisition of EPEAT-Registered Personal Computer Products 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds TransferSystem for Award Management 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.239-1, Privacy or Security Safeguards 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7000, Disclosure of Information 252.204-7004 Alternate A, System for Award Management 252.204-7012, Safeguarding of Unclassified Controlled Technical Information 252.209-7998, Representation Regarding Conviction of a Felony Criminal Violation under any Federal or State Law. 252.209-7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law 252.211-7003, Item Unique Identification & Valuation 252.212-7000, Offeror Representations and Certifications--Commercial Items 252.225-7001, Buy American and Balance of Payments Program 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area Workflow Payment Instructions 252.203-7998 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality AgreementsRepresentation. (DEVIATION 2015-O0010) (FEB 2015) (a) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (End of provision) 252.203-7999 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS.(DEVIATION 2015-O0010) (FEB 2015) (a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d)(1) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015, (Pub. L. 113-235), use of funds appropriated (or otherwise made available) under that or any other Act may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause. (End of clause) This RFQ closes March 7, 2016 at 10:00 A. M. Pacific Standard Time. Quotes must be uploaded on the SPAWAR e-commerce website at https://e- commerce.sscno.nmci.navy.mil under SSC Pacific/Simplified Acquisitions/N66001-16-T-6078. The point of contact for this solicitation is Cynthia Horriat at cynthia.horriat@navy.mil. Please include RFQ N66001-16-T-6078 on all inquiries. All responding vendors must have a completed registration in the System for Award Management (SAM) program prior to award of contract. Information to register in SAM can be found at: https://www.sam.gov/portal/public/SAM/. Complete SAM registration means a registered DUNS and CAGE Code numbers.

C--Mechanical, Electrical and Fire Protection (MEFP) Engineering Services, A-E IDIQ, Unrestricted, NAVFAC Southwest, San Diego, California

Department of the Navy, Naval Facilities Engineering Command | Published May 3, 2016  -  Deadline June 2, 2016
cpvs

N62473-16-R-1870 DESCRIPTION: THIS IS AN UNRESTRICTED PROCUREMENT. ALL INFORMATION NEEDED FOR INTERESTED PARTIES TO SUBMIT A STANDARD FORM (SF) 330, ARCHITECT-ENGINEER QUALIFICATIONS, IS CONTAINED HEREIN. THERE IS NO SEPARATE REQUEST FOR PROPOSAL (RFP) PACKAGE TO DOWNLOAD. Architect-Engineer (A-E) services are required for a firm fixed-price Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for Mechanical, Electrical and Fire Protection (MEFP) Engineering services for Mechanical, Electrical, and Fire Protection Projects. Projects under this contract will occur at various military installations located in the NAVFAC Southwest Area of Responsibility (AOR): California, Arizona, Nevada, Colorado, New Mexico, and Utah; but may be available to the NAVFAC area of responsibility (AOR) as approved by the NAVFAC Southwest (SW) Chief of Contracting Office (CCO). The preponderance of work is expected to be in southern California. A-E Design and Engineering Services shall mainly provide for, but not be limited to, MECHANICAL, ELECTRICAL AND FIRE PROTECTION ENGINEERING related services. All A-E services will be in accordance with the scope of this contract, applicable references, and Unified Facilities Criteria (UFC). The number of design task orders per fiscal year may vary and may involve surges of multiple projects with overlapping delivery dates. Primary A-E services required: Preparation of Requests for Proposals (RFP) for Design Build (DB) projects; Design-Bid-Build (DBB) construction contract packages (i.e., full plans and specifications); Mechanical/Electrical Site Investigations, Studies, Surveys; and Reports from studies, surveys and/or site investigations. Secondary A-E services required: Cost estimates; construction contract support services (CCSS) or post construction award services (PCAS); Fire Protection Engineering Designs, Studies, Surveys and Site Investigation (e.g. fire risk/hazard analysis, life safety code analysis, fire modeling and engineering documentation, antiterrorism, and final inspections and tests of installed Fire Protection Systems. Fire Protection surveys shall be conducted within the guidelines established by OPNAVINST 11320.23G). Support A-E services which may be required: Technical reviews of government-prepared RFP for DB projects and/or full plans and specifications for DBB projects; preparation of planning and programming support documents; incidental architectural, civil, structural, geotechnical, and environmental work; identification and abatement methods for existing asbestos-containing materials, lead-based paint, and other hazardous materials. Primary types of projects will include, but are not limited to, sustainable energy documentation (e.g. Energy Master Planning, Commissioning, Life Cycle Cost, LEED/Third Party Certifications, Title 24 Energy Compliance documents, ASHRAE 90.1 compliance documents, and ASHRAE 90.1 Performance Rating Method reports); Military Construction (MILCON), new construction, major repair/renovation of on-site power generating systems (e.g. solar, cogeneration); control systems (e.g. microgrid, utility control systems); heating, ventilation, air conditioning and control systems (e.g. exhaust systems, direct digital control schematic and architecture); energy supply systems (i.e. above and below ground steam distribution, high temperature/pressure water, refrigeration systems, and natural gas including earthquake shut off valves); plumbing systems; interior and exterior electrical power systems (.e.g. interior building power, medium and low voltage distribution systems, primary and secondary substations, Uninterruptable Power Supply (UPS), emergency generators); communication and security systems (e.g. cable TV, electronic security systems); fire alarm; and lighting systems for airfield, operational and training, commercial, institutional, industrial, research development, quality of life facilities, etc. Secondary type of projects will include, but are not limited to, new construction, major repair/renovation of industrial ventilation; compressed air; medical gas; oxygen; fire protection systems (e.g. fire sprinklers, fire alarm and detection systems, and fire resistant building assemblies). The maximum contract value may not exceed $30,000,000 aggregate total. The minimum guarantee for the contract is $5,000. The minimum guarantee for the entire contract term (including option years) will be satisfied by the award of the initial task order. The minimum value of individual task orders executed under this contract is $200,000. The maximum value of individual task orders executed under this contract is $2,500,000. There will be no dollar limit per year. Multiple task orders may be awarded with similar completion schedules and overlapping delivery dates. Contract term is for a one-year base period with four option periods. Each performance period will run 365 (366 for leap year) calendar days. The hourly rates will be negotiated for each performance period. The Government may exercise the option period unilaterally. Per NFAS 17.208-100(c)(1), options for PCAS may be negotiated on individual task orders for unilateral exercise. The estimated start date is December 2016. The NAICS Code for this procurement is 541330 (Engineering Services) and the annual small business size standard is $15 Million. The Government makes no representation as to the number of task orders or the actual amount of work to be ordered. The contractor is not guaranteed work in excess of the minimum guarantee. Firms that provided Architect-Engineer services for a task order issued under the resulting contract are prohibited from participating on the subsequent construction contract. This limitation also applies to subsidiaries/affiliates of the firm. SELECTION CRITERIA AND SUBMITTAL REQUIREMENTS: Selection of Architects and Engineers, formerly the Brooks Act (PL 92-582) and Federal Acquisition Regulations (FAR) Part 36.6 selection procedures apply. The evaluation and selection will be based on the following criteria: Criterion 1, Professional Qualifications; Criterion 2, Specialized Experience and Technical Competence; Criterion 3, Capacity; Criterion 4, Past Performance; Criterion 5, Location and Knowledge of the Locality; Criterion 6, Quality Control; Criterion 7, Utilization of Small Business, and Criterion 8, Volume of Work. Submitted SF330s (Architect-Engineer Qualifications) and related information will be evaluated to determine the most highly qualified firm based on criteria responses. Criteria 1 and 2 are considered most important and of equal importance to each other; Criteria 3, 4, 5, 6 and 7 are of lesser importance and listed in descending order of importance; and Criterion 8 is of lesser importance and will be used as a tiebreaker among firms considered to be technically equal. Evaluation of past performance and experience may include information provided by the firm, customer inquiries, Government databases, and publicly available sources. Failure to provide requested data, accessible points of contact, or valid phone numbers may result in a firm being considered less favorably in the evaluation. In evaluating an Offerors capability, the Government will consider how well the offeror complied with these instructions. All projects provided in the SF 330 (Architect-Engineer Qualifications) shall have been completed by the office/branch/individual team member actually performing the work under this contract. Projects not performed by the office/branch/individual team member will be excluded from evaluation consideration. Submission Requirements: The SF330, Part 1 submission is limited to thirty (30), 8.5x11 pages (see definition). Information submitted beyond the stated page limitation, unless otherwise accepted, will not be considered in the evaluation. Submit one (1) original and three (3) copies of SF330 (Parts 1 and 2), addressing the selection criteria information below. Requested items not counted as part of the 30-page limitation are as noted herein. Also submit one electronic copy of the complete SF330 on CD (Adobe Acrobat .PDF format). SF330, Part 1, Sections B and C: In Block 5, in addition to the name of the firm, provide the firms Data Universal Numbering System (DUNS) number issued by Dun and Bradstreet Information Services. In Block 9, in addition to the name of the firm, provide the DUNS number of each proposed team member. SF330, Part 1, Section D: Organization Chart: In addition to requirements stated in the SF330 Instructions, identify on the submitted organization chart the relationships and lines of authority of the proposed team members, including key subcontractors, including the following: - Name - Firm employed with - Job Title/Role - Licensure, certification, and or accreditation - Permanent geographic location of individual Note: All individuals listed on the organization chart are not required to have a resume in Section E, such as administrative or lower level engineering positions. This chart shall not be counted as part of the 30-page limitation. This chart must be affixed to the submittal to avoid separation in handling. SF330, Part 1, Section E, Resumes of Key Personnel, CRITERION 1, PROFESSIONAL QUALIFICATIONS: The evaluation will consider the professional qualifications of proposed key personnel (see definition) in providing relevant primary and secondary A-E services for project types identified for this contract. Include the geographic office location of the individual on the resume. All key personnel must be professionally registered/accredited (see definition) in their discipline. The designated Program Manager (see definition) shall be a professionally registered Electrical Engineer and be an employee of the prime A-E firm. The prime A-E firm shall have a minimum of two (2) professionally registered Electrical Engineers on staff, in addition to the Program Manager, to perform the anticipated work of this contract. In addition, the Offerors team (see definition) shall include a minimum of two (2) professionally registered Mechanical Engineers, and one (1) professionally registered Fire Protection Engineer. Key personnel demonstrating experience with projects located in California may be considered more favorably in the evaluation Submission Requirements: Provide brief resumes of proposed key personnel who will specifically perform the relevant primary and secondary A-E services for relevant project types identified for this contract. Non-relevant information will not be considered. Resumes of personnel performing only support services (as listed above) are not required and will not be considered. Certificate copies will not be counted in the 30-page limitation. For each key personnel, indicate highest level of education achieved, number of years engaged in the discipline, and professional registration discipline, state, and number. Submit a copy of the applicable current professional registration/accreditation certificate (personnel with registration in multiple states need only submit a copy from one state). Certificate copies will not be counted in the 30-page limitation. Key personnel resumes shall include, but not be limited to, individuals who will perform the functions of Program Manager, Design Quality Control Manager (DQCM), and Sustainable Design Manager. Key personnel resumes from the prime A-E firm shall include, but not be limited to, a minimum of two (2) professionally registered Electrical Engineers. Key personnel resumes from the Offerors team shall include, but is not limited to, a minimum of two (2) registered professional Mechanical Engineers, and one (1) registered professional Fire Protection Engineer. See definitions at the end of this notice for registration and experience requirements. Resumes of these individuals shall demonstrate their depth of experience in their respective roles. Each resume shall include a maximum of five (5) specific, recently completed projects that best demonstrate the individuals qualifications in performing the relevant primary and secondary A-E services listed for this contract. Projects not meeting these requirements will not be considered. Submit only projects in which the key personnel performed a significant role. Provide the month and year of completion of the professional services for each project. Submit a brief description of the project within SF330, Section E, Block 19. For each project describe: 1) Scope and cost; 2) Role and responsibilities of the key personnel; and 3) The specific A-E services performed that are relevant to the primary and secondary services required by this contract. Identifying only the individuals job title will not provide sufficient information to determine their specific experience as it relates to services to be performed under this contract. Projects not meeting these requirements will not be considered. For submittal purposes, a task order on an IDIQ contract is considered a project (see definitions), as is a standalone contract award. Do not list an IDIQ contract as an example of a completed project. Instead, list relevant completed task orders or stand-alone contract awards. Examples of project work submitted that do not conform to this requirement will not be evaluated. For purposes of this evaluation, recent is defined as professional services completed during the period of June 2, 2011 through June 1, 2016. Projects must be complete as of the SF330 due date. Completion is defined as the date that the final design or design-build package was completed, or the date that the study/investigation/report was completed and submitted, and does not include construction support services. Projects not meeting these requirements will not be considered to demonstrate recent experience. SF330, Part 1, Section F, Example Projects, CRITERION 2, SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE: The evaluation will consider specialized experience and technical competence of the proposed team relative to the primary and secondary A-E services for project types identified for this contract. The evaluation will also consider the experience of the prime A-E in managing multi-disciplinary teams. Relevant projects completed in California may be considered more favorably in the evaluation process. Submission Requirements: For the proposed team, submit a maximum of ten (10) recently completed projects (see definitions), that best demonstrate the overall team experience in performing the primary and secondary A-E services for project types identified for this contract. Provide the month and year of completion of the professional services for each project. Projects shall have been performed by the office(s)/branch(es) identified in SF330, Part 1, Section C. Projects not meeting these requirements will not be considered. To enable verification, firms should include the DUNS number along with each firm name in the SF330 Part I, Section F, Block 25. If the project is a Department of Defense/Government contract, include the complete contract number, including the task order number if applicable. In SF330, Part 1, Section F, Block 24, submit a description of the project, including: 1) Type of project and its relevance to the scope of this contract; 2) Specific relevant A-E services performed by the firm; 3) Construction cost; 4) Relevant sustainable features (see definition) incorporated in the project (if none or if not applicable to the project, affirmatively state so). For projects with LEED or equivalent sustainability certification, submit copies of the certificate or other supporting documentation (not counted in the 30-page limitation); and 5) A-E fees for the project. Firms with multiple offices shall indicate which office/branch performed the A-E services. Additional requirements: - At least three (3) projects shall demonstrate relevant experience with projects having professional fees of $500,000 or greater. - At least one (1) project shall demonstrate relevant design experience (i.e. full plans and specs, not including PCAS) with microgrid (see definition). - At least one (1) project shall demonstrate relevant design experience (i.e. full plans and specs, not including PCAS) with airfield lighting. - At least one (1) project shall demonstrate relevant design experience (i.e. full plans and specs, not including PCAS services) with HVAC projects containing DDC, hydronic hot water and hydronic chilled water systems. - At least one (1) project that demonstrates relevant experience with the preparation of Request for Proposal for Design-Build or with design (i.e. full plans and specs, not including PCAS services) for each of the following: o Exterior electrical power systems with a minimum of 15kV (i.e., overhead and underground distribution systems, primary and secondary substations, emergency generators, etc.) o Fire Protection System and life safety features for a facility Note: A single project may satisfy more than one of the above minimum requirements. For submittal purposes, a task order on an IDIQ contract is considered a project (see definitions), as is a stand-alone contract award. Do not list an IDIQ contract as an example of a completed project. Instead, list relevant completed task orders or stand-alone contract awards. Examples of project work submitted that do not conform to this requirement will not be evaluated. Recent is defined as professional services completed during the period of June 2, 2011 through June 1, 2016. Projects must be complete as of the SF330 due date. Completion is defined as the date that the final design or design-build package was completed, or the date that the study/investigation/report was completed and submitted, and does not include construction support services. Projects not meeting the above requirements will not be considered. If the proposed team is a joint venture (JV), submit information for relevant projects completed by the JV entity. If the JV does not have shared experience, projects may be submitted for each of the JV partners. In any case, do not exceed the ten (10) project limitation. In cases where the submitted project was performed by a JV, but all JV partners for that project are not on the team identified in Part I, Section C, specifically describe the relevant work performed by the JV partner(s) proposed for this contract. In all cases, clearly describe the specific relevant work self-performed by the proposing firm and the firms roles and responsibilities on the project; do not include work that is not attributable to the proposing firm. If the project description does not clearly delineate the work performed by the entity/entities teaming on this contract, the project may not be considered. SF330, Part 1, Section G, Key Personnel Participation in Example Projects: Submit in accordance with the SF330 Instructions. From the total projects listed in Section F, provide a maximum of ten (10) projects. SF330, Part 1, Section H, Additional Information requested by Agency. Address the remaining Criteria 3 through 8; additional sheets may be used (up to the 30 page limitation for Part 1) if required. See submission requirements. Clearly identify the Criterion number and title. CRITERION 3, CAPACITY: The evaluation will consider the Offerors capacity to accomplish the work in the required time. Submission Requirements: Submit a narrative that demonstrates the firms capacity to accomplish work in the required time frames. Address key elements by identifying and discussing: 1) Present workload and capability to integrate work under this contract with other work; 2) Availability of the project team (including subcontractors) for the specified contract performance period; 3) Capacity to accomplish multiple large task orders simultaneously with overlapping delivery dates; and 4) Strategy to meet surges in unexpected workload demand. CRITERION 4, PAST PERFORMANCE: The evaluation will consider the Offerors past performance on relevant Government and/or commercial projects regarding quality of work, cost control, compliance with performance schedules, and customer satisfaction, with emphasis on example projects presented in Section F. The evaluation will be based on past performance assessments and other available past performance information. Points of contact provided in the proposal may be contacted. Where there is no record of past performance, the proposal will be evaluated neither favorably nor unfavorably. Superior performance ratings on relevant projects may be considered more favorably in the evaluation. Submission Requirements: Submit a narrative to demonstrate Offerors past performance in effective project cost control: 1) Describe the firms cost estimating procedures and project cost control methods. Note: this refers to estimating and controlling the cost of the construction, and does not refer to the labor cost of performing the design services; and 2) Provide budget amounts, final construction cost estimates, and actual construction contract award amounts for at least five (5) projects submitted in Section F. Explain any differences between estimated and actual costs. For projects provided as experience in Section F, list and provide copies of any applicable design awards received (not counted in the 30-page limitation). Clearly indicate to which Section F project the award applies; otherwise the information may not be considered. Submit an A-E Contractor Appraisal Support System (ACASS), Contractor Performance Assessment Report System (CPARS), or a Past Performance Questionnaire (PPQ) evaluation for each project submitted under Criterion 2. If a completed ACASS/CPARS evaluation is available, it shall be submitted with the completed SF330 package. If there is not a completed ACASS/CPARS evaluation, the PPQ included with this notice is provided for the Offeror or its team members to submit to the client for each project. If a PPQ is submitted, but an official ACASS/CPARS evaluation is found for that project in government databases, the official evaluation will take precedence. If an ACASS/CPARS evaluation is not available, ensure correct phone numbers and email addresses are provided for the client point of contact. Completed PPQs should be submitted with your SF330. If the A-E is unable to obtain a completed PPQ from a client for a project before the response date set forth in this notice, the A-E should complete and submit with their response the first page of the PPQ (Attachment #1), including contract and client information for the respective projects. A-Es should follow-up with clients/references to ensure timely submittal of questionnaires. If the client requests, questionnaires may be submitted directly to the Governments point of contact, Naval Facilities Engineering Command Southwest, Code RAQ20.EP, Attn: Elliott Penetrante, via email at elliott.penetrante@navy.mil, prior to the response date. A-Es shall not incorporate by reference into their response ACASS/CPARS or PPQ evaluations previously submitted in response to other A-E services procurements. However, this does not preclude the Government from utilizing previously submitted PPQ information in the past performance evaluation. Submitted ACASS/CPARS and PPQ evaluations will not be counted as part of the 30 page limitation and shall be attached to the SF330, behind the SF330 Part II document. CRITERION 5, LOCATION AND KNOWLEDGE OF THE LOCALITY: The evaluation will consider the teams location, demonstrated knowledge of and project experience within the geographic areas where projects are anticipated for this contract. The preponderance of the work will be at Navy and Marine Corps installations in southern California. Prime AE firms with a local office in southern California may be considered more favorably in the evaluation. Submission Requirements: Submit a narrative that demonstrates the teams knowledge of and project experience within the geographic locations for anticipated projects on this contract. Include: 1) Location of the Offerors main office and any branch offices and subcontractor offices that will be utilized for this contract; 2) Description of teams knowledge of, and project experience within, the targeted geographic areas; and 3) Description of teams availability and ability to ensure timely response to requests for onsite support at Government installations throughout the NAVFAC SW AOR. CRITERION 6, QUALITY CONTROL: The evaluation will consider the Offerors Design Quality Control (DQC) program for ensuring technical accuracy of the A-E work product and effective cross-coordination among various design disciplines. Firms that demonstrate a QC process that will minimize the governments quality assurance (QA) effort in reviewing the A-Es work product may be considered more favorably in the evaluation. Submission Requirement: Submit a narrative that describes the DQC program that the prime A-E firm uses to ensure technical integrity of provided services. Address key elements by identifying and describing: 1) Offerors QC program that is used to ensure technical accuracy, effective coordination, and consistency of the A-Es work product across all disciplines (including subcontractors); and 2) Process used for checking documents for coordination errors, omissions, conflicts, and discrepancies in the design/report documents; tracking changes and incorporating review comments. For offerors who are joint ventures and/or teams with offices in a variety of locations, describe how the QC effort will be implemented across the various team offices. Describe from which office the QC program will be managed/coordinated and the plan/methods to ensure effective QC and communication between offices. CRITERIA 7, UTILIZATION OF SMALL BUSINESS: (To be addressed by all firms, including small businesses). Utilization of small business concerns as subcontractors shall be evaluated. Firms that demonstrate a high level of utilization of small business in subcontractor roles work may be considered more favorably in the evaluation process. Submission Requirements: Submit a narrative that demonstrates commitment and use of small business concerns as subcontractors on this contract. Address the key elements by identifying and discussing: 1) Commitment to the following small business subcontracting goals: Small Business (SB) 66.94%; Small Disadvantaged Business 17.44%; Woman- Owned Small Business 15.45%; HUBZone Small Business 9.03%; and Service- Disabled Veteran-Owned Small Business/Veteran Owned Small Business 3.06%; 2) How the small business, listed as subcontractor in your SF330, will meet the subcontracting goal for each socio-economic category(ies); and 3) Type of service the subcontractor performs and list of subcontracting percentages the subcontractor will meet in their respective socio-economic category. Show subcontractor name, DUNS number, small business socio-economic category, and type of service to be perform in this contract. Note: Firms slated for an interview will be required to submit a subcontracting plan that reflects a minimum of the subcontracting goals and subcontractors stated above prior to the interview. CRITERION 8, VOLUME OF WORK: The evaluation will consider the volume of DoD work awarded to the prime A-E in the past 12 months with the objective of equitably distributing contracts among A-E firms, including minority-owned firms and firms without prior DoD contracts. Submission Requirements: State the dollar amount of work previously awarded to the firm identified in the SF330 as the Prime by DOD in the past 12 months. Joint venture (JV) should list awards to the JV entity and separately list awards to each individual JV member for the time period. Do not include work performed as a subcontractor. SELECTION INTERVIEW REQUIREMENTS: Personal interviews may be scheduled for firms slated as most highly qualified. Firms slated for interviews may be asked to explain or expand on information contained in their SF 330 submittal. Elaborate presentations are not desired. Note that joint ventures (JV) slated for interviews will be required to provide a copy of their JV Agreement prior to the interview. ADDITIONAL INFORMATION: All information must be included in the submitted SF 330 package (cover letter, attachments, and excess information beyond the 30-page limit, unless otherwise excepted, will not be considered in the evaluation). System for Award Management (SAM) Database: In accordance with FAR 52.204-7, System for Award Management Registration, ensure your firm has an active SAM entity record. SAM is a Federal Government owned and operated free web site that consolidates the capabilities of CCR (Central Contractor Registration), ORCA (Online Representations and Certifications Application), and EPLS (Excluded Parties List System). SAM is the primary Government repository for current and prospective federal awardee information. Please complete your SAM registration for the same name and address identified as the submitting office on your SF330, with its associated CAGE code and DUNS or DUNS+4. Registration instructions and information can be accessed from the SAM home page at: https://www.sam.gov. In accordance with the Selection of Architects and Engineers (formerly the Brooks Act), the A-E firm must be a registered/licensed architectural and/or engineering firm. Provide evidence that your firm, subcontractor or proposed team members are permitted by law to practice the profession of Architecture and/or Engineering, i.e., State registration number, a brief explanation of the firms licensing in states that do not register firms, etc. Firms will be required to submit proof of required professional A-E registration/licensure prior to the interview phase of the selection process. This documentation is not counted as part of the 30-page limitation. A-E firms meeting the requirements described in this announcement are invited to submit a completed SF330 package per the submission requirements to the office shown below. The submittal package (original, plus 3 copies and 1 CD) shall be received in this office (NAVFAC Southwest, Attn: Elliott Penetrante, Code RAQ20.EP, 1220 Pacific Highway, San Diego, CA 92132) no later than, 2:00 P.M. Pacific Standard Time on June 1, 2016. Facsimile and emailed SF330 packages will not be accepted. Submittals received after this date and time will not be considered. THIS IS NOT A REQUEST FOR PROPOSAL. ALL INFORMATION NEEDED TO SUBMIT SF330 DOCUMENTS IS CONTAINED HEREIN. NO SOLICITATION PACKAGE, TECHNICAL INFORMATION, OR BIDDER/PLAN HOLDER LIST WILL BE ISSUED. It is the offerors responsibility to check the NAVFAC electronic solicitation website NECO (Navy Electronic Commerce Online) at: https://www.neco.navy.mil for any revisions to this announcement or other notices. Plan-holder list is available via the NECO website and an Interested Vendors List is available via the FedBizOpps website, www.fbo.gov, under this solicitation number. Address inquiries via email: elliott.penetrante@navy.mil or via telephone: 619-532-2967. *** END OF ANNOUNCEMENT *** DEFINITIONS OF TERMS: SEE ATTACHMENT SYNOPSIS DOCUMENT

Electrical Tools and Test Equipment

Department of the Air Force, Air Education and Training Command | Published July 10, 2015  -  Deadline July 17, 2015
cpvs

Please see attached RFQ for details.

A-E IDIQ MECHANICAL, ELECTRICAL AND PLUMPING (MEP) ENGINEERING SERVICES, SMALL BUSINESS SET-ASIDE FOR VARIOUS PROJECTS, NAVFAC SOUTHWEST

Department of the Navy, Naval Facilities Engineering Command | Published February 5, 2014  -  Deadline March 11, 2014
cpvs

ALL INFORMATION NEEDED FOR INTERESTED PARTIES TO SUBMIT A STANDARD FORM (SF) 330, ARCHITECT-ENGINEER QUALIFICATIONS, IS CONTAINED HEREIN. THERE IS NO SEPARATE REQUEST FOR PROPOSAL (RFP) PACKAGE TO DOWNLOAD. This is Small Business Set-Aside. Architect-Engineer (A-E) services are required for a firm fixed-price Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for Mechanical, Electrical and Plumbing (MEP) Engineering. The work for this contract shall occur at various Navy and Marine Corps facilities and other military installations located in the NAVFAC Southwest Area of Responsibility (AOR): California, Arizona, Nevada, Colorado, New Mexico and Utah. The preponderance of the work will be in Southern California. The Offeror/Contractor must demonstrate adequate in-house staffing capable to self-perform at least 50 percent of the cost of the contract as required by FAR Clause 52.219-14 (b)(1) Limitation on Subcontracting. A-E Design and Engineering Services shall mainly provide for, but not be limited to, MECHANICAL, ELECTRICAL AND PLUMBING ENGINEERING related services. All A-E services will be in accordance with the scope of this contract, applicable references, and Unified Facilities Criteria (UFC). For this contract, the lead discipline shall be a registered Mechanical or Electrical Engineer. Primary A-E services will include, but are not limited to, preparation of Requests for Proposals (RFP) for Design Build (DB) projects; Design-Bid-Build (DBB) construction contract packages (i.e., drawings, specifications, basis of design, design analysis, engineering calculations, cost estimate, etc.); Site Investigations / Studies / Surveys; Reports from studies, surveys and/or site investigations; design and construction quality control support services; addressing constructability issues, such as, phasing of work in occupied and unoccupied facilities and disruption of both utilities and operations of the site and building occupants during construction. Secondary A-E services include technical reviews of Government prepared RFP package for DB projects and Government prepared design documents for DBB projects; antiterrorism; Post Construction Award Services (PCAS); Fire Protection Engineering Designs, Studies, Surveys and Site Investigation; fire risk/hazard analysis; life safety code analysis; fire modeling and engineering documentation; and final inspections and tests of installed Fire Protection Systems. Fire Protection surveys shall be conducted within the guidelines established by OPNAVINST 11320.23F. Support services may include incidental architectural, fire protection, civil, geotechnical, environmental, and structural work as well as identification and abatement methods of existing asbestos containing materials, lead-based paint and other hazardous materials. Primary type of projects will include, but is not limited to, Energy Master Planning; Commissioning; Retro-commissioning; Life Cycle Cost; Solar systems and cogeneration; LEED, and Title 24 Energy Compliance documents; new installation or repair/renovation of heating, ventilation, air conditioning and control systems; direct digital control schematic and architecture; exhaust systems; above and below ground steam distribution; high temperature/pressure water; refrigeration systems; natural gas (including earthquake shut off valves); water (including backflow preventer); plumbing systems; building electric power; communication; cable TV; electronic security; fire alarm; and lighting systems for operational and training, commercial, institutional, industrial, research development, and quality of life facilities. Secondary type of projects include industrial ventilation; compressed air; medical gas; oxygen; acetylene lubricant; fuel pumping distribution systems; sprinkler system; fire alarm and detection systems; and fire resistant building assemblies. The maximum contract value may not exceed $30,000,000 aggregate total. The minimum guarantee for the contract shall be $5,000. The minimum guarantee for the entire contract term (including option years) will be satisfied by the award of the initial task order. The minimum value of individual task orders executed under this contract is $200,000. The maximum value of individual task orders executed under this contract is $2,500,000. There will be no dollar limit per year. Multiple task orders may be awarded with similar completion schedules and overlapping delivery dates. Contract term is for a one-year base period with four option periods. Each performance period will run 365 (366 for leap year) calendar days. The hourly rates will be negotiated for each performance period. The Government may exercise the option period unilaterally. Per NFAS 17.208-100(c) (1), options for post construction award services may be negotiated on individual task orders for unilateral exercise. The estimated start date is October, 2014. This procurement is Small Business Set-Aside. The NAICS Code for this procurement is 541330 (Engineering Services) and the annual small business size standard is $14 Million. The Government makes no representation as to the number of task orders or the actual amount of work to be ordered. The contractor is not guaranteed work in excess of the minimum guarantee. Firms that design or prepare specifications for a construction contract or task order issued under the resulting contract are prohibited from providing the subsequent construction. This limitation also applies to subsidiaries/affiliates of the firm. SELECTION CRITERIA AND SUBMITTAL REQUIREMENTS: Brooks Act (PL 92-582) and Federal Acquisition Regulations (FAR) Part 36.6 selection procedures apply. The evaluation and selection will be based on the following criteria: Criterion 1, Professional Qualifications; Criterion 2, Specialized Experience and Technical Competence; Criterion 3, Capacity; Criterion 4, Past Performance; Criterion 5, Location and Knowledge of the Locality; Criterion 6, Quality Control; and Criterion 7, Volume of Work. SF 330s will be evaluated to determine the most highly qualified firm based on criterion responses. Criteria 1 and 2 are considered most important and equal among themselves; Criteria 3, 4, 5, and 6 are slightly less important and listed in descending order of importance; and Criteria 7 is of lesser importance and will be used as tiebreaker among technically equal firms. Evaluating past performance and experience may include information provided by the firm, customer inquiries, Government databases, and publicly available sources. Failure to provide requested data, accessible points of contact, or valid phone numbers could result in a firm being considered less qualified. In evaluating an Offeror's capability, the Government shall consider how well the offeror complied with these instructions. All projects provided in the SF 330 (Architect-Engineer Qualifications) must be completed by the office/branch/individual team member actually performing the work under this contract. Projects not performed by the office/branch/individual team member will be excluded from evaluation consideration. Submission Requirements: The SF 330 Part 1 is limited to 30, 8.5"x11" single-sided pages. Minimum font size is 10. Submit the following: a) One (1) original and two (2) copies of the SF 330 for the prime offeror (which also includes a completed Part II for the firm and key subcontractors) addressing the following selection criterion information; and b) one compact disk copy, in Adobe Acrobat format, of the complete SF330 being submitted by the firm. The organization chart, A-E Contractor Appraisal Support System (ACASS) and Past Performance Questionnaire (PPQ) evaluations shall not be counted as part of the 30 page limitation SF330, Part 1, Section B: Contract Information: In Block 5, list firm's Dun and Bradstreet Number in addition to the name of the firm. SF330, Part 1, Section D: Organization Chart: In addition to the Instructions provided for the SF 330, (i.e. the names and roles of all key personnel in this contract/solicitation and the firm they are associated with), identify the overall relationship and lines of authority of the proposed team, including key subcontractors. (Note: All individuals listed on the organization chart are not required to have a resume in Section E, such as administrative or lower level engineering positions.) This chart shall not be counted as part of the 30 page limitation. This chart must be affixed to the submittal to avoid separation in handling. SF 330, Part 1, Section E, Resumes of Key Personnel; CRITERION 1, PROFESSIONAL QUALIFICATIONS: Professional qualifications of the proposed team members assigned to this contract in A-E services including the preparation of the required primary and secondary services in the types of projects specified shall be evaluated. The prime A-E firm shall have on staff a minimum of one Registered Mechanical and one Registered Electrical Engineers to perform the work anticipated under this contract. In addition the proposed team shall include one Certified Commissioning Agent, one LEED Accredited Professional (AP) and one Registered Fire Protection Engineer. The Project Lead shall be a registered Mechanical or Electrical Engineer and be an employee of the prime A-E firm under this contract. The primary member responsible for Sustainable Design shall be a LEED AP. Projects completed in California may be considered more favorably in the evaluation process. Submission Requirements: Provide brief resumes of each proposed team member who will specifically perform the primary and secondary services for the type of projects listed above. Resumes of personnel performing only support services (as listed above) are not required and will not be reviewed. All key personnel must be professionally registered/accredited in their discipline; include the discipline, state, license number and the expiration date of registration. Provide the level of education achieved and the number of years engaged in the discipline. Identify the primary key personnel responsible for the Quality Control (QC) program and the primary LEED AP key personnel responsible for sustainable design. Each resume shall include a maximum of five (5) specific, recently completed projects, within the scope of projects anticipated for this contract, that best illustrate the individual member's qualifications in performing the listed primary and secondary A-E services. Resumes for the Quality Control and Sustainable Design personnel shall demonstrate their experience in that role for MEP projects. A specific project is a single project/function contract or a single task order under an Indefinite Delivery Indefinite Quantity or On-Call type Contract. "Recent" is defined as professional services (100% plans and specifications signed off by an Architect-Engineer and ready for construction with final cost estimate. Does not include any Post Construction Award Support (PCAS)) completed within the past five years prior to the SF330 due date (03/11/2009 or later for purposes of this synopsis). Projects not meeting these requirements will not be considered. Submit projects in which the key personnel performed a significant role. Submit a brief description of the project within block 19 of the SF330, Section E requirement. In addition, clearly address key elements for each project by describing: 1) The role and responsibilities of the key personnel in the project; and 2) The specific MEP engineering services performed by the key personnel in the project. SF 330, Part 1, Section F, Example Projects, CRITERION 2, SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE: Specialized experience and technical competence of the proposed team members assigned to this project experienced in the preparation of the required primary and secondary services in the types of projects specified shall be evaluated. Projects completed by the prime A-E firm identified in Part I may be given more consideration in the evaluation process than projects of proposed subcontractors. Projects completed in California may be considered more favorably in the evaluation process. Submission Requirements: For the proposed team, submit a maximum of ten (10) specific, recently completed projects with an A-E fee within the task order range identified above, that best illustrate overall team experience in the required primary and secondary services in the types of MEP engineering projects listed above. A specific project is a single project/function contract or a single task order under an Indefinite Delivery Indefinite Quantity or On-Call type Contract. "Recent" is defined as professional services (100% plans and specifications signed off by an Architect-Engineer and ready for construction with final cost estimate. Does not include any Post Construction Award Support (PCAS)) completed within the past five years prior to the SF330 due date (03/11/2009 or later for purposes of this synopsis). Projects shall have been performed by the office(s) (main or branch) identified in Part 1, Section C. Projects not meeting these requirements will not be considered. If the project is a Department of Defense/Government contract, include the complete contract number, including the task order number if applicable. Submit a brief but explicit description of the project, project's relevance to the contract, and the A-E fee within block 24 of SF330, Section F. Firms with multiple offices shall indicate which office performed the services. In addition: - Submit at least one project demonstrating self-performance experience of a complete building retro-commissioning including Mechanical, Electrical and Plumbing systems. - Submit at least one project demonstrating self-performance design experience with Digital Direct Controls or Energy Management Control Systems schematic and architecture. - Submit at least one project demonstrating self-performance experience in the production of a Design-Bid-Build (DBB) construction contract packages (i.e., drawings, specifications, basis of design, design analysis, engineering calculations, cost estimate, etc.). If the proposed team is a joint venture (JV), information should be submitted as a joint venture; however, if there is no information for the joint venture, information should be submitted for each joint venture partner, while ensuring you do not exceed the maximum of ten (10) projects for the proposed team. If a project was performed by a joint venture, and all joint venture partners are not on the team proposed for this contract, the firm should specifically address the work performed by the joint venture partner teaming on this contract. Likewise, if the team member worked as a subcontractor on a project, the description should clearly describe the work actually performed by the team member and the roles and responsibilities of each on the project, rather than the work performed on the project as a whole. If the project description does not clearly delineate the work performed by the entity/entities teaming on this contract, the project could be eliminated from consideration. SF330, Part 1, Section G, Key Personnel Participation in Example Projects: Submit in accordance with the SF 330 Instructions. From the total projects listed in Section F, provide a maximum of ten (10) projects. SF330, Part 1, Section H, Additional Information requested by Agency. Address the remaining Criteria 3 through 7; additional sheets may be used up to the maximum of 30 total pages for Part 1, if required. See submission requirements. Clearly identify the Criterion number and title. CRITERION 3, CAPACITY: Capacity to accomplish the work in the required time shall be evaluated. Submission Requirements: Submit a narrative that demonstrates firm's capacity to accomplish work in required time frames. Address key elements by identifying and discussing: 1) Present workload; 2) Availability of the project team (including subcontractors) for the specified contract performance period; 3) Ability to perform the work to schedules; 4) Capacity to accomplish multiple, large and small tasks simultaneously; 5) Available specialized equipment; 6) Key personnel and team members' current and/or prior security clearances. CRITERION 4, PAST PERFORMANCE: Past performance with relevant contracts/projects with Government agencies and private industry in terms of cost control, quality of work, compliance with performance schedules with emphasis on example projects presented in Section F. Firms will be evaluated based on past performance assessments and other available information regarding past performance. Points of contact provided in other criteria may be contacted. A proposal with no record of relevant past performance information shall be evaluated neither favorably nor unfavorably. Superior performance ratings on relevant projects may be considered more favorably in the evaluation process. Submission Requirements: Show past performance on contracts with Government agencies and private industry in terms of cost control, quality of work, and compliance with performance schedules. Submit an ACASS or a PPQ evaluation for each project listed under Criterion 2. If a completed ACASS evaluation is available, it shall be submitted with the completed SF330 package. If there is not a completed ACASS evaluation, the PPQ included with this notice is provided for the offeror or its team members to submit to the client for each project. AN OFFEROR SHALL NOT SUBMIT A PPQ WHEN AN ACASS EVALUATION IS AVAILABLE. If an ACASS evaluation is not available, ensure correct phone numbers and email addresses are provided for the client point of contact. Completed PPQs should be submitted with your SF 330. If the offeror is unable to obtain a completed PPQ from a client for a project before the response date set forth in this notice, the offeror should complete and submit with their response the first page of the PPQ (Attachment #1), including contract and client information for the respective projects. Offerors should follow-up with clients/references to ensure timely submittal of questionnaires. If the client requests, questionnaires may be submitted directly to the Government's point of contact, Naval Facilities Engineering Command Southwest, Code RAQ20.BK, Attn: Betty Kimes, via email at betty.kimes@navy.mil, prior to the response date. Offerors shall not incorporate by reference into their response PPQ or ACASS evaluations previously submitted in response to other A-E services procurements. However, this does not preclude the Government from utilizing previously submitted PPQ information in the past performance evaluation. Submitted ACASS and PPQ evaluations will not be counted as part of the 30 page limitation and shall be attached to the SF330, behind the SF330 Part II document. For each project provided as experience in Section F, list applicable awards and commendations. Submit a narrative to demonstrate quality of past performance in terms of the effectiveness of the cost control process. Describe the firm's overall cost estimating procedures, and identify the team member(s) who is/are responsible for implementing and monitoring this process. CRITERION 5, LOCATION AND KNOWLEDGE OF THE LOCALITY: Firm's location within and demonstrated knowledge of the general geographical areas in which projects could be located shall be evaluated. The work for this contract shall occur at various Navy and Marine Corps facilities and other military installations located in Arizona, California, Colorado, Nevada, New Mexico and Utah. The majority of work will be in Southern California. The prime A-E firm with a local office in Southern California may be considered more favorably in the evaluation process. Submission Requirements: Submit a narrative that demonstrates the firm's knowledge of and experience in the general geographical area of this contract. Address key elements by identifying and discussing: 1) The location of the firm's main offices, branch offices, and sub consultants' offices; 2) The team's knowledge of and availability to work in the geographical area; and 3) Ability of the firm to ensure timely response to requests for onsite support. CRITERION 6, QUALITY CONTROL: Demonstration of the design Quality Control (QC) program used by the firm that ensures technical accuracy and cross coordination among disciplines shall be evaluated. Firms that demonstrate a QC process that minimize the government's effort to QA the A-E's work may be considered more favorably in the evaluation process. Submission Requirements: Submit a narrative that describes the design QC program used by the firm to ensure technical integrity of provided services. Address key elements by identifying and describing: 1) The QC process the team uses to ensure consistent quality work across the entire team (including subcontractors); and 2) The team's QC processes for checking documents for coordination errors, omissions, conflicts, and discrepancies in the design/report documents; tracking, and incorporating review comments. CRITERION 7, VOLUME OF WORK: Volume of DOD work awarded to the firm in past 12 months with objective of equitably distributing contracts among firms, including minority owned firms and firms without prior DOD contracts shall be evaluated. Submission Requirements: Provide a list of DOD contracts/task orders awarded in the last 12 months to the firm identified in the SF330 as the Prime. Joint ventures (JV) should list awards to the JV entity and separately list awards to each individual JV member for that time period. Do not include work performed as a Subcontractor. Include the dollar amount for each DOD contract/task order awarded. Firms with multiple offices shall indicate which branch office completed each project. Include agency phone numbers and points of contact. Joint ventures (JV) should list awards to the JV entity and separately list awards to each individual JV member for that time period. SELECTION INTERVIEW REQUIREMENTS: Personal interviews may be scheduled for firms slated as most highly qualified. Firms slated for interviews may be asked to explain or expand on information contained in the SF 330 submittal. Elaborate presentations are not desired. Please note Joint Ventures (JV) slated for interviews will be required to provide a copy of the JV Agreement prior to the interview. ADDITIONAL INFORMATION: All information must be included in the SF 330 package, (cover letter, attachments and excess number of pages will be excluded from the evaluation process). System for Award Management (SAM) Database: Ensure your firm has an active SAM entity record. SAM is a Federal Government owned and operated free web site that consolidates the capabilities of CCR (Central Contractor Registration), ORCA (Online Representations and Certifications Application), and EPLS (Excluded Parties List System). SAM is the primary Government repository for current and prospective federal awardee information. Please complete your SAM registration for the same name and address identified as the submitting office on your SF330, with its associated CAGE code and DUNS or DUNS+4. Registration instructions and information can be accessed from the SAM home page at: https://www.sam.gov In accordance with the Brooks Act, the AE Firm must be a registered/licensed architectural and/or engineering firm. Provide evidence that your firm, subcontractor or proposed team members are permitted by law to practice the profession of Architecture or Engineering, i.e. State registration number, a brief explanation of the firm's licensing in states that do not register firms, etc. Architect-Engineer firms which meet the requirements described in this announcement are invited to submit a completed SF330 package per the submission requirements to the office shown below. One copy of the submittal package (original, plus 2 copies and 1 CD) is to be received in this office (NAVFAC Southwest, Attn: Betty Kimes, Code RAQ20.BK 1220 Pacific Highway , San Diego, CA 92132) no later than, 2:00 P.M. Pacific Standard Time on TUESDAY, MARCH 11, 2014, in order to be considered. Facsimile and emailed SF 330's will not be accepted. Submittals received after this date and time will not be considered. Read the following information carefully. It is an Offeror's responsibility to deliver its SF 330 to the proper place at the proper time which includes allowing a reasonable amount of time for the delivery of the SF 330 (FAR 15.208(a)). Offerors shall ensure that SF 330s are mailed or sent by courier in a timely manner to be delivered to the NAVFAC Southwest facility no later than the date and time stated in this notice. An Offeror risks the late receipt and rejection of their SF 330 when it delays delivering its SF 330 until the last few minutes before the time set for receipt of SF 330s. Offerors intending to deliver the SF 330 in person to the facility at the address above are cautioned that this NAVFAC Southwest facility is located in downtown San Diego. It is recommended that the Offeror allows for delays in driving through downtown San Diego caused by traffic (both freeway and downtown), train/trolley crossing, parking at the pay lots/meters near the facility, and gaining access to a secure Government facility. No parking or offloading of SF 330s is available at the Government facility. SF 330s are to be delivered to the mailroom in Building 128 and reasonable time shall be allowed for the person in the mailroom to receive and time stamp the SF 330. The stamp time is determined from the NAVFAC Southwest facility mailroom time stamp and not any other time keeping equipment that the Offeror may own. Immediately upon SF 330 delivery the Offeror shall leave the Government facility. An Offeror that does not leave the premises may be requested to leave or be escorted off the premises. THIS IS NOT A REQUEST FOR PROPOSAL. NO SOLICITATION PACKAGE, TECHNICAL INFORMATION, OR BIDDER/PLAN HOLDER LIST WILL BE ISSUED. It is the offeror's responsibility to check the NAVFAC electronic solicitation website NECO (Navy Electronic Commerce Online) at: https://www.neco.navy.mil for any revisions to this announcement or other notices. Plan-holder list is available via the NECO website and an Interested Vendors List is available via the FedBizOpps website, www.fbo.gov, under this solicitation number. Address inquiries via email: betty.kimes@navy.mil or via telephone: 619-532-4261 *** END OF ANNOUNCEMENT ***

Y--AWARD NOTICE OF CONTRACT N6247314C2401

Department of the Navy, Naval Facilities Engineering Command | Published February 21, 2014
cpvs

Install 220V distribution system at Building 605 lab, construct electrical distribution system upgrades and lab modifications to Building 609, construct electrical distribution system upgrades to Building 623, and install 440V distribution system upgrades, SPAWAR, Naval Base Point Loma, San Diego, CA

C--8(a) Sole Source Acquisition

Department of the Navy, Naval Facilities Engineering Command | Published January 5, 2016
cpvs

8(a) Sole Source Contract for various projects under NAICS 238210-Electrical Contractors and Other Wiring Installation Contractors for requirements at Naval Base Point Loma and NAVFAC SW FEAD Point Loma Area of Responsibility.

ASHE 13-1022 REPAIR PASs ELECTRICAL SYSTEM MULTI AT ZULU, AREA F, AVIANO AB

Department of the Air Force, US Air Force Europe | Published January 30, 2015
cpvs

THIS IS A PRE-SOLICITATION NOTICE. NOTICE TO OFFERORS: TENTATIVE DATE FOR ISSUANCE OF THIS SOLICITATION: FEBRUARY 2015 THIS WORK WILL BE PERFORMED ENTIRELY IN ITALY AND THEREFORE IN ACCORDANCE WITH DFARS 225.1103(3) PROVISION 252.225-7042 AS LISTED IN PROVISION 252.204-7007 ALTERNATE A SHALL APPLY. SOA FOR PROJECT WORK: CATEGORY: OG10 and/or OS30- INTERESTED VENDORS SHALL BE IN POSSESSION OF A CURRENT SOA CERTIFICATION FOR THE CITED CATEGORY. CLASSIFICATION - ADEQUATE TO COVER VENDOR'S PROPOSED AMOUNT FOR PROJECT PERFORMANCE. MAGNITUDE OF CONSTRUCTION IN ACCORDANCE WITH FAR 36.204: BETWEEN $1,000,000 AND $5,000,000. SCOPE OF PROJECT ASHE 13-1022 REPAIR PAS ELECTRICAL SYSTEM AT ZULU LOOP, B. 7930, 7970, 7990, 8030, AVIANO AIR BASE, ITALY. A DETAILED SUMMARY OF THE PRINCIPAL ITEMS OF WORK CAN BE OBTAINED BY CONSULTING THE PROJECT TECHNICAL SPECIFICATIONS. NOTE: All quantities indicated in the project documents furnished by the Government, including the construction cost breakdown, are estimates and the Government shall not be held responsible for the accuracy of the estimated quantities. The performance shall require a completed project on a lump sum basis. It is the responsibility of the offeror to calculate, foresee and perform all quantities of work manifestly necessary to deliver a complete project based on its overall scope. SITE VISIT: AN ORGANIZED SITE VISIT WILL BE SCHEDULED AT THE DATE AND MEETING POINT SPECIFIED IN THE SOLICITATION. NORMALLY PARTICIPANTS WILL MEET IN THE PARKING AREA OF LVIS GATE (CONTRACTOR GATE) AREA F FLIGHTLINE, AVIANO AIR BASE. NOTICE TO OFFERORS/SUPPLIERS: FUNDS ARE N0T PRESENTLY AVAILABLE FOR THIS EFFORT. NO AWARD WILL BE MADE UNDER THIS SOLICITATION UNTIL FUNDS ARE AVAILABLE. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THIS SOLICITATION, EITHER BEFORE OR AFTER THE CLOSING DATE FOR RECEIPT OF PROPOSALS. IN THE EVENT THE GOVERNMENT CANCELS THIS SOLICITATION, THE GOVERNMENT HAS NO OBLIGATION TO REIMBURSE AN OFFEROR FOR ANY COSTS. IMPORTANT: INTERESTED FIRMS SHOULD USE THE "WATCH THIS OPPORTUNITY" WEB SITE FEATURE TO BE AUTOMATICALLY NOTIFIED OF ALL CHANGES TO THIS SOLICITATION

ASHE 14-1011 REPAIR ELECTRICAL SYSTEM 3 PASs AT ZULU, AVIANO AB

Department of the Air Force, US Air Force Europe | Published January 30, 2015
cpvs

THIS IS A PRE-SOLICITATION NOTICE. NOTICE TO OFFERORS: TENTATIVE DATE FOR ISSUANCE OF THIS SOLICITATION: FEBRUARY 2015 THIS WORK WILL BE PERFORMED ENTIRELY IN ITALY AND THEREFORE IN ACCORDANCE WITH DFARS 225.1103(3) PROVISION 252.225-7042 AS LISTED IN PROVISION 252.204-7007 ALTERNATE A SHALL APPLY. SOA FOR PROJECT WORK: CATEGORY: OG10 and/or OS30- INTERESTED VENDORS SHALL BE IN POSSESSION OF A CURRENT SOA CERTIFICATION FOR THE CITED CATEGORY. CLASSIFICATION - ADEQUATE TO COVER VENDOR'S PROPOSED AMOUNT FOR PROJECT PERFORMANCE. MAGNITUDE OF CONSTRUCTION IN ACCORDANCE WITH FAR 36.204: BETWEEN $1,000,000 AND $5,000,000. SCOPE OF PROJECT ASHE 14-1011 REPAIR PASs ELECTRICAL SYSTEM AT ZULU LOOP, B. 8010,7910,7870, AREA F, AVIANO AIR BASE, ITALY. A DETAILED SUMMARY OF THE PRINCIPAL ITEMS OF WORK CAN BE OBTAINED BY CONSULTING THE PROJECT TECHNICAL SPECIFICATIONS. NOTE: All quantities indicated in the project documents furnished by the Government, including the construction cost breakdown, are estimates and the Government shall not be held responsible for the accuracy of the estimated quantities. The performance shall require a completed project on a lump sum basis. It is the responsibility of the offeror to calculate, foresee and perform all quantities of work manifestly necessary to deliver a complete project based on its overall scope. SITE VISIT: AN ORGANIZED SITE VISIT WILL BE SCHEDULED AT THE DATE AND MEETING POINT SPECIFIED IN THE SOLICITATION. NORMALLY PARTICIPANTS WILL MEET IN THE PARKING AREA OF LVIS GATE (CONTRACTOR GATE) AREA F FLIGHTLINE, AVIANO AIR BASE. NOTICE TO OFFERORS/SUPPLIERS: FUNDS ARE N0T PRESENTLY AVAILABLE FOR THIS EFFORT. NO AWARD WILL BE MADE UNDER THIS SOLICITATION UNTIL FUNDS ARE AVAILABLE. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THIS SOLICITATION, EITHER BEFORE OR AFTER THE CLOSING DATE FOR RECEIPT OF PROPOSALS. IN THE EVENT THE GOVERNMENT CANCELS THIS SOLICITATION, THE GOVERNMENT HAS NO OBLIGATION TO REIMBURSE AN OFFEROR FOR ANY COSTS. IMPORTANT: INTERESTED FIRMS SHOULD USE THE "WATCH THIS OPPORTUNITY" WEB SITE FEATURE TO BE AUTOMATICALLY NOTIFIED OF ALL CHANGES TO THIS SOLICITATION